Skip to Content

Changes for page 06 Data Tool

Last modified by Joe on 2026/10/24 10:24
From version 28.1
edited by Joe
on 2025/10/09 09:16
Change comment: There is no comment for this version
To version 34.1
edited by Joe
on 2026/10/24 10:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -219,18 +219,19 @@
219 219  |Bottom|3|1|2|40
220 220  |Outside|2|3|3|20
221 221  
222 -From the above table, one group of recipes is needed when spraying different parts, and three groups of recipes can be established, and each group of recipes has four ingredients: Red, Green, Blue, Spraying time. The value of each ingredient is different in different groups of recipes.**Recipe configuration**
222 +From the above table, one group of recipes is needed when spraying different parts, and three groups of recipes can be established, and each group of recipes has four ingredients: Red, Green, Blue, Spraying time. The value of each ingredient is different in different groups of recipes. **Recipe configuration**
223 223  
224 224  The recipe function needs to be used with the recipe configuration area and [Recipe record] object. Click [Recipe] in the [System configuration/Record setting] in the upper left side of the software [[image:1698393787529-717.png]]and the following interface will pop up:
225 +
225 225  
226 226  (% style="text-align:center" %)
227 -[[image:1.png]]
228 +[[image:taavZYE8GK.png]]
228 228  
229 -Click [Add] to pop up the recipe setting interface, as shown in the following figure:
230 -
231 231  (% style="text-align:center" %)
232 -[[image:2.png]]
231 +[[image:8-1Recipe.png]]
233 233  
233 +Click [Add] to pop up the recipe setting interface, as shown in the following figure:
234 +
234 234  |Recipe configuration options|Description|Notice
235 235  |Recipe name|Name the current recipe|Note: Recipe name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), ('') and other non-English characters.
236 236  |Group number|Configure the group number of the current recipe, ranging from 0 to 1000|
... ... @@ -274,9 +274,6 @@
274 274  
275 275  **Description**
276 276  
277 -(% style="text-align:center" %)
278 -[[image:8-1Recipe.png]]
279 -
280 280  **Basic**
281 281  
282 282  * **Recipe Folder:** Give Recipe folder name (It can be used, when setting Recipe display object);
... ... @@ -462,17 +462,21 @@
462 462  * When the elements of a line in CSV file is more than the elements set in the software (DB), it will prompt the import failure;
463 463  * When the CSV file imported into the regular series HMI is a recipe file, the data representing the recipe format (elements, number of groups, whether it is a special recipe) in line 1 must be correct, otherwise the import of CSV file will fail.
464 464  
465 -== **Recipe record function** ==
463 += **New recipe ** =
466 466  
467 -**Basic setting**
465 +(% class="box infomessage" %)
466 +(((
467 +Note: The recipe is available for the ig and RH series, starting from software version PI9. For other series, please refer to the traditional recipe.
468 +)))
468 468  
470 +== **General** ==
471 +
469 469  (% style="text-align:center" %)
470 -[[image:3.png]]
473 +[[image:AzlSf2dTCpL.png]]
471 471  
472 -Recipe selection: Select the recipe name to be displayed. The list is all the recipes configured in the recipe. If the list is empty, add the recipe in [Recipe].
475 +**Recipe select:** Select the recipe name to be displayed. The list is all the recipes configured in the recipe. If the list is empty, add the recipe in [Recipe].
473 473  
474 -Recipe shortcut key setting:
475 -
477 +**Recipe buttons  configuration:**
476 476  Add data: Used to add groups.
477 477  
478 478  Delete data: Used to delete the selected configuration
... ... @@ -485,34 +485,37 @@
485 485  
486 486  Export recipe: Used to export the current recipe as a file.
487 487  
488 -**Graphic**
490 +== **Graphic** ==
489 489  
490 490  (% style="text-align:center" %)
491 -[[image:4.png]]
493 +[[image:AAwnFNTik0dN.png]]
492 492  
493 -Style selection: Styles can be switched or customized.
495 +**Style select:**The basic and custom styles can be selected for the recipe table. Enabling custom styles allows you to configure the table's colors.
494 494  
495 -Background configuration: Set the recipe background, including background color and transparency.
497 +**Cell type: **The height and widths of table rows and columns can be customized.
498 +**Security:**
496 496  
497 -Table configuration: Set the appearance of recipe table area, including row background color, row spacing color, horizontal header background color, vertical header background color, horizontal header text color, vertical header text color, text color, row selected color, name color, line color and cell style.
498 -
499 -**Expansion**
500 -
501 501  (% style="text-align:center" %)
502 -[[image:5.png]]
501 +[[image:aaa.png]]
503 503  
504 -Object lock: With the interlock address, the object is locked and the lock icon is displayed (upper left corner of the object) when the lock address is 0, and the bit switch is operable only when the bit pointed by the interlock bit address is 1. To lock the bit switch when the interlock bit address is 1, just check "Lock in ON".
503 +== **Object Lock** ==
505 505  
506 -Object lock icon: Icons will not display when the [Not display “Lock” icon] option is checked. Icon display will adapt to the change of object size.
505 +1.Use an interlock bit address; when the address value is 0, the component will be locked and a lock icon will be displayed. The bit switch can only be operated when the bit at the specified address is 1.
506 +2.To hide the lock icon, check the "Do not display lock icon" option.
507 +3.To lock the bit switch when the interlock bit address is 1, simply check the "Lock when ON" option.
507 507  
508 -Gray level display: When the object is locked, the text message will be grayed out.
509 +==
510 +**New recipe function address** ==
509 509  
510 -== **New recipe function address** ==
511 -
512 512  In recipe, new special address is used as Function address.
513 513  
514 -**Address Type:** RPG
514 +**Address Type:RPG**
515 515  
516 +(% class="box infomessage" %)
517 +(((
518 +Note: The new recipe **cannot use the internal function addresses of traditional recipes**; only the new recipe in** PI 11.4** and above can use RPG addresses.
519 +)))
520 +
516 516  (% style="text-align:center" %)
517 517  [[image:企业微信截图_17570533194720.png]]
518 518  
... ... @@ -1394,6 +1394,12 @@
1394 1394  
1395 1395  = **Cloud** =
1396 1396  
1402 +(% class="box infomessage" %)
1403 +(((
1404 +**Note:** Regarding to how to download V-net Client in PC or V-net app on the phone, please refer to the following link.
1405 +**Link: [[Download>>https://docs.we-con.com.cn/bin/view/V-Net%202.0/Download/Software/]]**
1406 +)))
1407 +
1397 1397  **Introduction**
1398 1398  
1399 1399  You may configure the basic settings of Cloud functions, tags, and User MQTT according to your needs. (If the device supports the Cloud function, you can use the function and configure the tags after checking the box to enable it, or upload the data to the 3rd party server.)
... ... @@ -3053,6 +3053,22 @@
3053 3053  (% style="text-align:center" %)
3054 3054  [[image:56.jpg]]
3055 3055  
3067 +This chapter describes how to use various MQTT communication protocols. Users can publish messages to the MQTT server and subscribe to topics from the server.
3068 +
3069 +Some HMI models support a multi-instance MQTT client architecture, allowing the HMI device to act as a client and connect to multiple independent MQTT Brokers (servers). With this function, messages can be published to different servers without interference. It breaks the limit of a single data channel, supports distributed data reporting, multi-cloud collaboration, and integration of heterogeneous systems, enabling "one-device multi-send" directly on the device side. In addition, different network adapters can be selected to bind data flows and enhance data security.
3070 +
3071 +Each MQTT connection instance supports independent operating status control and complete parameter configurations, ensuring high availability and flexibility of communication in complex network environments. In addition to enabling or disabling each server in project configuration, users can dynamically adjust the communication status of specific channels by operating registers according to service requirements or network conditions, without device restart or interference to other channels.
3072 +
3073 +Click [MQTT] [[image:1788161202460-725.png]]under Function Configuration/Cloud Configuration in the top menu bar of the software. Click the Add button to pop up the setting window, and select different cloud services for MQTT configuration, as shown in the figure below:
3074 +
3075 +[[image:1788161202461-324.png]]
3076 +
3077 +[[image:1788161202466-398.png]]
3078 +
3079 +Enabled: Check this option to enable the connection of the designated server.
3080 +
3081 +Network adapter: Click the button on the right and select a specified network adapter from the drop-down list. If [Default] is selected, the system will automatically use an available network port for connection. Multiple servers can share the same network adapter.
3082 +
3056 3056  = OPCUA Server =
3057 3057  
3058 3058  (% class="box infomessage" %)
1788160673662-172.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1788161202460-725.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1788161202461-324.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
1788161202466-398.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +17.1 KB
Content
A06GBxcaxVb.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
AAwnFNTik0dN.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +33.7 KB
Content
AlArR7wDAyX.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +29.0 KB
Content
AzlSf2dTCpL.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +52.3 KB
Content
aaa.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +9.7 KB
Content
taavZYE8GK.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +80.4 KB
Content