Skip to Content

Changes for page 06 Data Tool

Last modified by Joe on 2026/10/24 10:24
From version 5.1
edited by Joe
on 2025/09/05 14:53
Change comment: There is no comment for this version
To version 34.1
edited by Joe
on 2026/10/24 10:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -219,18 +219,19 @@
219 219  |Bottom|3|1|2|40
220 220  |Outside|2|3|3|20
221 221  
222 -From the above table, one group of recipes is needed when spraying different parts, and three groups of recipes can be established, and each group of recipes has four ingredients: Red, Green, Blue, Spraying time. The value of each ingredient is different in different groups of recipes.**Recipe configuration**
222 +From the above table, one group of recipes is needed when spraying different parts, and three groups of recipes can be established, and each group of recipes has four ingredients: Red, Green, Blue, Spraying time. The value of each ingredient is different in different groups of recipes. **Recipe configuration**
223 223  
224 224  The recipe function needs to be used with the recipe configuration area and [Recipe record] object. Click [Recipe] in the [System configuration/Record setting] in the upper left side of the software [[image:1698393787529-717.png]]and the following interface will pop up:
225 +
225 225  
226 226  (% style="text-align:center" %)
227 -[[image:1.png]]
228 +[[image:taavZYE8GK.png]]
228 228  
229 -Click [Add] to pop up the recipe setting interface, as shown in the following figure:
230 -
231 231  (% style="text-align:center" %)
232 -[[image:2.png]]
231 +[[image:8-1Recipe.png]]
233 233  
233 +Click [Add] to pop up the recipe setting interface, as shown in the following figure:
234 +
234 234  |Recipe configuration options|Description|Notice
235 235  |Recipe name|Name the current recipe|Note: Recipe name can only consist of (0~~9), (a~~z), (A~~Z), ('_'), ('') and other non-English characters.
236 236  |Group number|Configure the group number of the current recipe, ranging from 0 to 1000|
... ... @@ -274,9 +274,6 @@
274 274  
275 275  **Description**
276 276  
277 -(% style="text-align:center" %)
278 -[[image:8-1Recipe.png]]
279 -
280 280  **Basic**
281 281  
282 282  * **Recipe Folder:** Give Recipe folder name (It can be used, when setting Recipe display object);
... ... @@ -462,17 +462,21 @@
462 462  * When the elements of a line in CSV file is more than the elements set in the software (DB), it will prompt the import failure;
463 463  * When the CSV file imported into the regular series HMI is a recipe file, the data representing the recipe format (elements, number of groups, whether it is a special recipe) in line 1 must be correct, otherwise the import of CSV file will fail.
464 464  
465 -== **Recipe record function** ==
463 += **New recipe ** =
466 466  
467 -**Basic setting**
465 +(% class="box infomessage" %)
466 +(((
467 +Note: The recipe is available for the ig and RH series, starting from software version PI9. For other series, please refer to the traditional recipe.
468 +)))
468 468  
470 +== **General** ==
471 +
469 469  (% style="text-align:center" %)
470 -[[image:3.png]]
473 +[[image:AzlSf2dTCpL.png]]
471 471  
472 -Recipe selection: Select the recipe name to be displayed. The list is all the recipes configured in the recipe. If the list is empty, add the recipe in [Recipe].
475 +**Recipe select:** Select the recipe name to be displayed. The list is all the recipes configured in the recipe. If the list is empty, add the recipe in [Recipe].
473 473  
474 -Recipe shortcut key setting:
475 -
477 +**Recipe buttons  configuration:**
476 476  Add data: Used to add groups.
477 477  
478 478  Delete data: Used to delete the selected configuration
... ... @@ -485,34 +485,37 @@
485 485  
486 486  Export recipe: Used to export the current recipe as a file.
487 487  
488 -**Graphic**
490 +== **Graphic** ==
489 489  
490 490  (% style="text-align:center" %)
491 -[[image:4.png]]
493 +[[image:AAwnFNTik0dN.png]]
492 492  
493 -Style selection: Styles can be switched or customized.
495 +**Style select:**The basic and custom styles can be selected for the recipe table. Enabling custom styles allows you to configure the table's colors.
494 494  
495 -Background configuration: Set the recipe background, including background color and transparency.
497 +**Cell type: **The height and widths of table rows and columns can be customized.
498 +**Security:**
496 496  
497 -Table configuration: Set the appearance of recipe table area, including row background color, row spacing color, horizontal header background color, vertical header background color, horizontal header text color, vertical header text color, text color, row selected color, name color, line color and cell style.
498 -
499 -**Expansion**
500 -
501 501  (% style="text-align:center" %)
502 -[[image:5.png]]
501 +[[image:aaa.png]]
503 503  
504 -Object lock: With the interlock address, the object is locked and the lock icon is displayed (upper left corner of the object) when the lock address is 0, and the bit switch is operable only when the bit pointed by the interlock bit address is 1. To lock the bit switch when the interlock bit address is 1, just check "Lock in ON".
503 +== **Object Lock** ==
505 505  
506 -Object lock icon: Icons will not display when the [Not display “Lock” icon] option is checked. Icon display will adapt to the change of object size.
505 +1.Use an interlock bit address; when the address value is 0, the component will be locked and a lock icon will be displayed. The bit switch can only be operated when the bit at the specified address is 1.
506 +2.To hide the lock icon, check the "Do not display lock icon" option.
507 +3.To lock the bit switch when the interlock bit address is 1, simply check the "Lock when ON" option.
507 507  
508 -Gray level display: When the object is locked, the text message will be grayed out.
509 +==
510 +**New recipe function address** ==
509 509  
510 -== **New recipe function address** ==
511 -
512 512  In recipe, new special address is used as Function address.
513 513  
514 -**Address Type:** RPG
514 +**Address Type:RPG**
515 515  
516 +(% class="box infomessage" %)
517 +(((
518 +Note: The new recipe **cannot use the internal function addresses of traditional recipes**; only the new recipe in** PI 11.4** and above can use RPG addresses.
519 +)))
520 +
516 516  (% style="text-align:center" %)
517 517  [[image:企业微信截图_17570533194720.png]]
518 518  
... ... @@ -618,22 +618,22 @@
618 618  The special addresses used in the Recipe are shown in the following table:
619 619  
620 620  (% class="table-bordered" %)
621 -|=Address|=Description|=Function
622 -|HSW1611|Traditional Recipe transfer operation.|(((
626 +|=Address|=(% style="width: 445px;" %)Description|=(% style="width: 629px;" %)Function
627 +|HSW1611|(% style="width:445px" %)Traditional Recipe transfer operation.|(% style="width:629px" %)(((
623 623  ~=1: Recipe download.
624 624  
625 625  ~=2: Recipe upload.
626 626  )))
627 -|HSW1612|Traditional Recipe group number.|Traditional Recipe group number.
632 +|HSW1612|(% style="width:445px" %)Traditional Recipe group number.|(% style="width:629px" %)Traditional Recipe group number.
628 628  |(((
629 629  HSW242
630 -)))|(((
635 +)))|(% style="width:445px" %)(((
631 631  Recipe operation result prompt:
632 632  
633 633  Upload: Data is written to recipe file from address.
634 634  
635 635  Download: Data is written to the address from recipe file.
636 -)))|(((
641 +)))|(% style="width:629px" %)(((
637 637  ~=1: Recipe download, start.
638 638  
639 639  ~=2: Recipe download, execution error.
... ... @@ -648,6 +648,7 @@
648 648  
649 649  ~=12: Recipe upload, successful.
650 650  )))
656 +|HSW11816|(% style="width:445px" %)Recipe record component button spacing control|(% style="width:629px" %)This controls the spacing between the top and bottom rows of buttons in all recipe record widgets. The value is the pixel spacing between the buttons. The minimum value is 0, and the maximum value is calculated based on the width of each recipe widget. The spacing plus the button size must not exceed the widget's size. (Note that if the register is greater than the maximum value, the actual spacing is the maximum spacing.)
651 651  
652 652  == **Recipe index** ==
653 653  
... ... @@ -898,6 +898,118 @@
898 898  
899 899  You could click here to jump to object "[[Data Record Display>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HDatarecorddisplay]]"
900 900  
907 += Column Chart =
908 +
909 +Use the bar chart  to monitor and visualize register data in real time
910 +
911 +== **Y-axis configuration** ==
912 +
913 +Configure the Y-axis parameters, including  value type, minimum ,maximum ,data types, and decimal point settings.
914 +
915 +(% style="text-align:center" %)
916 +[[image:5.png]]
917 +
918 +== **Channel setting** ==
919 +
920 +Set the channel address to be displayed.
921 +
922 +**Dynamic color:** Change value of a word address to change the color of the channel display.
923 +
924 +Dynamic color sequence: The color sequence number bound to the channel (click to enter the color sequence configuration interface)
925 +
926 +(% style="text-align:center" %)
927 +[[image:1.png]]
928 +
929 +(% class="wikigeneratedid" %)
930 +**Color sequence configuration interface**
931 +
932 +(% style="text-align:center" %)
933 +[[image:2.png]]
934 +
935 +**Upgrade to Global Configuration: **This color sequence is upgraded to the global default.
936 +
937 +**Global Configuration:** When a new bar chart control is created in a project, the color sequence has a default configuration. When you upgrade an existing configuration to a global configuration, the default color sequence for the new control will be the same as the configured color sequence.
938 +
939 +
940 +**Enable Baseline:** Set baselines on the bar chart.
941 +
942 +**Baseline: **The baseline ID bound to the channel) (click to enter the baseline configuration interface).
943 +
944 +(% style="text-align:center" %)
945 +[[image:121.png]]
946 +
947 +**Baseline Configuration:**
948 +
949 +**Value type: **Baseline value type
950 +
951 +(**Fixed value: **baseline value is fixedly set; **Dynamic address:** baseline value is read from address).
952 +
953 +**Upgrade to Global Configuration:** This will make this warning zone the global default configuration.
954 +
955 +Global Configuration: When a new bar chart control is created in a project, the warning zone has a default configuration. When you upgrade an existing configuration to a global configuration, the default configuration for the new control will be the same as the configured one.
956 +
957 +(% style="text-align:center" %)
958 +[[image:3.png]]
959 +
960 +== **Appearance setting** ==
961 +
962 +(% class="wikigeneratedid" %)
963 +Set a configuration for the X-axis, background color, etc.
964 +
965 +(% style="text-align:center" %)
966 +[[image:4.png]]
967 +
968 +== **Function settings** ==
969 +
970 +**Column Update Method：**
971 +
972 +**Periodic Update:** Updates the histogram periodically.
973 +
974 +**Triggered Update: **Controls whether the histogram updates based on an address.
975 +
976 +**Triggered Periodic Update:** Triggers a periodic update of the histogram.
977 +
978 +**Cycle update time: **Periodic update time setting, unit: seconds
979 +
980 +**Function control starting address: **The function of the bar chart can be controlled by the address. The starting address is configured here. For specific functions, refer to the address description list.
981 +
982 +(% style="text-align:center" %)
983 +[[image:0.png]]
984 +
985 +== Chart Button ==
986 +
987 +[[image:Screenshot 2025-09-09 102850.png||style="float:left"]]
988 +
989 +
990 +
991 +：Menu
992 +
993 +
994 +
995 +：Zoom in
996 +
997 +
998 +
999 +
1000 +：Zoom out
1001 +
1002 +
1003 +
1004 +
1005 +：Restore button (Reset the chart's zoom level to its original 1:1 ratio)
1006 +
1007 +
1008 +
1009 +
1010 +：Data label hide/show button(Controls hiding/showing of data labels)
1011 +
1012 +
1013 +
1014 +
1015 +：Settings Button
1016 +
1017 +
1018 +
901 901  = **User permission** =
902 902  
903 903  **Introduction**
... ... @@ -1281,6 +1281,12 @@
1281 1281  
1282 1282  = **Cloud** =
1283 1283  
1402 +(% class="box infomessage" %)
1403 +(((
1404 +**Note:** Regarding to how to download V-net Client in PC or V-net app on the phone, please refer to the following link.
1405 +**Link: [[Download>>https://docs.we-con.com.cn/bin/view/V-Net%202.0/Download/Software/]]**
1406 +)))
1407 +
1284 1284  **Introduction**
1285 1285  
1286 1286  You may configure the basic settings of Cloud functions, tags, and User MQTT according to your needs. (If the device supports the Cloud function, you can use the function and configure the tags after checking the box to enable it, or upload the data to the 3rd party server.)
... ... @@ -1330,7 +1330,7 @@
1330 1330  1. When you check the "low Data Mod" by default on new tags, the newly added tags will be enabled in Low Data Mode by default.
1331 1331  1. The longer the refresh interval, the slower the data upload, and the more traffic data will be saved. This function is only used for the control of tags.
1332 1332  
1333 -= MQTT[[image:2.png]] =
1457 += MQTT =
1334 1334  
1335 1335  (% class="wikigeneratedid" %)
1336 1336  Configurable type MQTT. Users can publish message to the MQTT server or subscribe topics from the MQTT server.
... ... @@ -2940,6 +2940,22 @@
2940 2940  (% style="text-align:center" %)
2941 2941  [[image:56.jpg]]
2942 2942  
3067 +This chapter describes how to use various MQTT communication protocols. Users can publish messages to the MQTT server and subscribe to topics from the server.
3068 +
3069 +Some HMI models support a multi-instance MQTT client architecture, allowing the HMI device to act as a client and connect to multiple independent MQTT Brokers (servers). With this function, messages can be published to different servers without interference. It breaks the limit of a single data channel, supports distributed data reporting, multi-cloud collaboration, and integration of heterogeneous systems, enabling "one-device multi-send" directly on the device side. In addition, different network adapters can be selected to bind data flows and enhance data security.
3070 +
3071 +Each MQTT connection instance supports independent operating status control and complete parameter configurations, ensuring high availability and flexibility of communication in complex network environments. In addition to enabling or disabling each server in project configuration, users can dynamically adjust the communication status of specific channels by operating registers according to service requirements or network conditions, without device restart or interference to other channels.
3072 +
3073 +Click [MQTT] [[image:1788161202460-725.png]]under Function Configuration/Cloud Configuration in the top menu bar of the software. Click the Add button to pop up the setting window, and select different cloud services for MQTT configuration, as shown in the figure below:
3074 +
3075 +[[image:1788161202461-324.png]]
3076 +
3077 +[[image:1788161202466-398.png]]
3078 +
3079 +Enabled: Check this option to enable the connection of the designated server.
3080 +
3081 +Network adapter: Click the button on the right and select a specified network adapter from the drop-down list. If [Default] is selected, the system will automatically use an available network port for connection. Multiple servers can share the same network adapter.
3082 +
2943 2943  = OPCUA Server =
2944 2944  
2945 2945  (% class="box infomessage" %)
1.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Wecon
1 +XWiki.joe
Size
... ... @@ -1,1 +1,1 @@
1 -476 bytes
1 +24.9 KB
Content
2.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Wecon
1 +XWiki.joe
Size
... ... @@ -1,1 +1,1 @@
1 -419 bytes
1 +6.5 KB
Content
3.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Wecon
1 +XWiki.joe
Size
... ... @@ -1,1 +1,1 @@
1 -13.4 KB
1 +15.1 KB
Content
4.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Wecon
1 +XWiki.joe
Size
... ... @@ -1,1 +1,1 @@
1 -26.6 KB
1 +34.5 KB
Content
5.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Wecon
1 +XWiki.joe
Size
... ... @@ -1,1 +1,1 @@
1 -9.0 KB
1 +32.2 KB
Content
0.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +32.6 KB
Content
12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 KB
Content
121.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +31.2 KB
Content
1788160673662-172.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1788161202460-725.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1788161202461-324.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
1788161202466-398.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +17.1 KB
Content
6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +19.9 KB
Content
A06GBxcaxVb.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
AAwnFNTik0dN.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +33.7 KB
Content
AlArR7wDAyX.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +29.0 KB
Content
AzlSf2dTCpL.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +52.3 KB
Content
Screenshot 2025-09-08 172930.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +17.7 KB
Content
Screenshot 2025-09-09 102850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
aaa.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +9.7 KB
Content
taavZYE8GK.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +80.4 KB
Content
企业微信截图_17573258167408.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +18.3 KB
Content
企业微信截图_17573258596819.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +820 bytes
Content
企业微信截图_17573258656147.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +2.8 KB
Content
企业微信截图_17573258723225.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +3.3 KB
Content
企业微信截图_17573258766561.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +2.8 KB
Content
企业微信截图_17573258811647.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 KB
Content
企业微信截图_175732588426.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.joe
Size
... ... @@ -1,0 +1,1 @@
1 +3.4 KB
Content