Changes for page 10 Advanced Function

Last modified by Jett on 2025/04/15 09:59

From 3.1 to 2.2 From 16.1 to 15.1

From version 15.1

edited by Mora Zhou
on 2023/11/21 14:45

Change comment: There is no comment for this version

To version 3.1

edited by Stone Wu
on 2022/08/05 11:31

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 2 removed)
- file setting.png
- 视频功能部件配置.png

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Mora
++XWiki.Stone

Content

@@ -6,7 +6,7 @@
 . Audio playing could play audio on HMI. You need to configure the relevant information, triggered by the condition, broadcast the set the mp3 audio file. The audio file can only be stored in the flash mp3 file.
 . Only the 9000 Series HMIs with audio modules can use this feature, and an external 3.5mm headphone head is required.
--== Configuration ==
++== **Configuration** ==
  In PIStudio software, the setting procedue is as follow.
@@ -13,7 +13,7 @@
  (% style="text-align:center" %)
  [[image:音频 1.png||height="655" width="528" class="img-thumbnail"]]
--**Click "Set" to open "Audio settings" window.**
++**(1) Click "Set" to open "Audio settings" window.**
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_949272a66c003cd.png||height="402" width="588" class="img-thumbnail"]]
@@ -23,35 +23,41 @@
  * Delete: Delete selected audio file.
  * Audio set: Set the configurations of the audio, contolled by address.
--**Trigger configuration for audio files**
++**(2) Trigger configuration for audio files**
  (% style="text-align:center" %)
  [[image:音频 2.png||class="img-thumbnail"]]
--* **Audio files**
--** MP3 file supported only.
--** The audio filesize should be less than 30MB.
--** The suffix .mp3 is necessary. The length of name should be less than 20 (including .mp3).
--** Audio file needs to be saved into the folder named mp3 in HMI flash, if not, it would not play. User could use the ~[[[CopyFile>>path:#_CopyFile]]] script function to import audio files into the HMI flash.
--* **Trigger mode settings: **There are 3 kinds trigger mode to choose. They coulf be valid at the same time.
--** **Play according to time interval: **Set the interval time. For example ,set 3 minutes, then it will play for each 3 minutes' interval.
--** **Trigger to play: **There are three bit trigger conditions: Rising edge, Falling edge and Bit change. You could trigger one condition to play the audio file.
--** **Play according to time: **Play the audio when the time is up.
--* **Play settings.** Set the play times and the cycle interval when it is triggered.
++**1) Audio files**
--**Audio file playback setting**
++* MP3 file supported only.
++* The audio filesize should be less than 30MB.
++* The suffix .mp3 is necessary. The length of name should be less than 20 (including .mp3).
++* Audio file needs to be saved into the folder named mp3 in HMI flash, if not, it would not play. User could use the ~[[[CopyFile>>path:#_CopyFile]]] script function to import audio files into the HMI flash.
++**2) Trigger mode settings**
++
++There are 3 kinds trigger mode to choose. They coulf be valid at the same time.
++
++* **Play according to time interval: **Set the interval time. For example ,set 3 minutes, then it will play for each 3 minutes' interval.
++* **Trigger to play: **There are three bit trigger conditions: Rising edge, Falling edge and Bit change. You could trigger one condition to play the audio file.
++* **Play according to time: **Play the audio when the time is up.
++
++**3) Play settings.** Set the play times and the cycle interval when it is triggered.
++
++**(3) Audio file playback setting**
++
  This function is to control the playback of audio file in the list by address. (It should be used with file list.)
  (% style="text-align:center" %)
  [[image:音频 3.png||height="429" width="620" class="img-thumbnail"]]
--== Control address ==
++== **Control address** ==
  The table below describes each bit address function (including play, pause, etc). If the audio control address is HDW120, then specific function details are as shown in the table below.
  (% class="table-bordered" %)
--|=(% scope="row" %)**Function**|=(% style="width: 177px;" %)**Address**|=(% style="width: 647px;" %)**Description**
++|=**Function**|=(% style="width: 177px;" %)**Address**|=(% style="width: 647px;" %)**Description**
  |(% rowspan="7" %)Play Control|(% style="width:177px" %)HDX120.0 (0(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Play control bit: Play the audio file when this bit address is triggered
  |(% style="width:177px" %)HDX120.1 (1(% style="font-size:10.5px" %)st(%%) bit)|(% style="width:647px" %)Pause control bit: Pause playback when this bit address is triggered, or resume playback after pause
  |(% style="width:177px" %)HDX120.2 (2(% style="font-size:10.5px" %)nd(%%) bit)|(% style="width:647px" %)Stop control bit: Stop the play when this bit address is triggered
@@ -64,13 +64,13 @@
  |(% style="width:177px" %)HDX120.9 (9(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Order: Play audio file orderly and stop as soon as the tas finished
  |(% style="width:177px" %)HDX120.10 (10(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Repeat in order: Repeat to play the audio file of the list
--== State address ==
++== **State address** ==
  The audio play status address occupies a continuous 35 word addresses. If audio play status address is set as HDW200, the specific function allocation details are shown as below table
  (% class="table-bordered" %)
--|=(% scope="row" style="width: 183px;" %)**Address**|=(% style="width: 314px;" %)**Function**|=(% style="width: 592px;" %)**Description**
--|=(% style="width: 183px;" %)HDW200|(% style="width:314px" %)Playback status storage address|(% style="width:592px" %)(((
++|=(% style="width: 183px;" %)**Address**|=(% style="width: 314px;" %)**Function**|=(% style="width: 592px;" %)**Description**
++|(% style="width:183px" %)HDW200|(% style="width:314px" %)Playback status storage address|(% style="width:592px" %)(((
  ~=0 : stop play
  ~=1 : playing
@@ -77,16 +77,13 @@
  ~=2 : pause play
  )))
--|=(% style="width: 183px;" %)HDW201|(% style="width:314px" %)Volume value storage address|(% style="width:592px" %)Range from 0 to 100(default value is 100, and it is not adjustable so fars
--|=(% style="width: 183px;" %)HDW202~~HDW234|(% style="width:314px" %)Audio file name|(% style="width:592px" %)Displays the file name of the audio currently playing
++|(% style="width:183px" %)HDW201|(% style="width:314px" %)Volume value storage address|(% style="width:592px" %)Range from 0 to 100(default value is 100, and it is not adjustable so fars
++|(% style="width:183px" %)HDW202~~HDW234|(% style="width:314px" %)Audio file name|(% style="width:592px" %)Displays the file name of the audio currently playing
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * The audio file needs to be stored in the flash of PI9000 series HMI.
  * Only PI9000 series HMI with audio module could support this function, and an external 3.5mm headphone is required.
--)))
  = **Video** =
@@ -93,50 +93,49 @@
  **Introduction**
 . Configure related information and play video files through conditional trigger.
--1. Only HMI 9000 and 8150ig series support this function.
++1. Only HMI  9000 series support this function.
 . Video playing could play video on HMI project screen.
 . It requires "Customized Object" and "File List" objects.
 . Currently, the video format support by Wecon HMI are including ASF, AVI, MKV, MP4, RM, and FLV.
--1. Olny supports playback of 360P and 480P resolution video.
--== Configuration ==
++== **Configuration** ==
--**Custom object configuration**
++**(1) Custom object configuration**
  (% style="text-align:center" %)
--[[image:视频功能部件配置.png]]
++[[image:11.Advanced Function_html_4939953650efc334.png||height="499" width="415" class="img-thumbnail"]]
--**Basic**
++**1) Basic**
  The function address doesn't have to be configured. DLL file name needs to be "Custom_MoviePlayer".
--**Custom Address**
++**2) Custom Address**
  * ID1 is the address for storing the video file name (including the suffix). It could not be empty and the length is 32 words.
  * ID2 is the address for video control, and occupies 1 word. It could not be empty. Please refer to[[ "Video control address">>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HControladdress-1]].
  * ID3 is the address of video status, and occupies 1 word. It could not be empty. 0 indicate stop, and 1 indicates play.
--* ID4 is the address for stroring the volume of video file, and occupies 1 word. 8150ig can not adjust the volume, only 9000 series can be set.
++* ID4 is the address for stroring the valume of video file, and occupies 1 word.
  * ID5 is the address for the video file path, and occupies 1 word. It could not be empty. Please refer to [["Video file path">>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HFilepath]].
--== Control address ==
++== **Control address** ==
  (% class="table-bordered" %)
  |=(% style="width: 151px;" %)**Function**|=(% colspan="2" style="width: 200px;" %)**Address**|=(% style="width: 599px;" %)**Description**
--|(% rowspan="7" style="width:151px" %)Play Control|(% style="width:92px" %)0(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.0|(% style="width:599px" %)(((
--Bit for playing control:This address save the name of the video file to be played.
++|(% rowspan="7" style="width:151px" %)Play Control|(% style="width:92px" %)0(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.0|(% style="width:599px" %)(((
++Bit for playing control: Play the video file when this bit address is triggered
  )))
--|(% style="width:92px" %)1(% style="font-size:10.5px" %)st(%%) bit|(% style="width:107px" %)HDX100.1|(% style="width:599px" %)Bit for pause control:Pause playing when this bit address is triggered, or resume playing after pause
--|(% style="width:92px" %)2(% style="font-size:10.5px" %)nd(%%) bit|(% style="width:107px" %)HDX100.2|(% style="width:599px" %)Bit for full screen control: Maximize the video when this bit address is triggered
--|(% style="width:92px" %)3(% style="font-size:10.5px" %)rd(%%) bit|(% style="width:107px" %)HDX100.3|(% style="width:599px" %)Last video: Play the last video when this bit address is triggered.
--|(% style="width:92px" %)4(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.4|(% style="width:599px" %)Next video: Play the next video when this bit address is triggered.
--|(% style="width:92px" %)5(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.5|(% style="width:599px" %)Volume increase: Increased by 10 （only be supported 9000 series）
--|(% style="width:92px" %)6(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.6|(% style="width:599px" %)Volume decrease: Decreased by 10 （only be supported 9000 series）
--|(% rowspan="4" style="width:151px" %)Mode Selection|(% style="width:92px" %)7(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.7|(% style="width:599px" %)Once: Only play current video file once
--|(% style="width:92px" %)8(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.8|(% style="width:599px" %)Single cycle: Repeat to play current video file
--|(% style="width:92px" %)9(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.9|(% style="width:599px" %)Order: Play video file of the list and stop after done
--|(% style="width:92px" %)10(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.10|(% style="width:599px" %)Repeat in order: Repeat to play the video file of the list
++|(% style="width:92px" %)1(% style="font-size:10.5px" %)st(%%) bit|(% style="width:107px" %)HDX102.1|(% style="width:599px" %)Bit for pause control:Pause playing when this bit address is triggered, or resume playing after pause
++|(% style="width:92px" %)2(% style="font-size:10.5px" %)nd(%%) bit|(% style="width:107px" %)HDX102.2|(% style="width:599px" %)Bit for full screen control: Maximize the video when this bit address is triggered
++|(% style="width:92px" %)3(% style="font-size:10.5px" %)rd(%%) bit|(% style="width:107px" %)HDX102.3|(% style="width:599px" %)Last video: Play the last video when this bit address is triggered.
++|(% style="width:92px" %)4(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.4|(% style="width:599px" %)Next video: Play the next video when this bit address is triggered.
++|(% style="width:92px" %)5(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.5|(% style="width:599px" %)Volume increase: Increased by 10
++|(% style="width:92px" %)6(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.6|(% style="width:599px" %)Volume decrease: Decreased by 10
++|(% rowspan="4" style="width:151px" %)Mode Selection|(% style="width:92px" %)7(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.7|(% style="width:599px" %)Once: Only play current video file once
++|(% style="width:92px" %)8(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.8|(% style="width:599px" %)Single cycle: Repeat to play current video file
++|(% style="width:92px" %)9(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.9|(% style="width:599px" %)Order: Play video file of the list and stop after done
++|(% style="width:92px" %)10(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX102.10|(% style="width:599px" %)Repeat in order: Repeat to play the video file of the list
--== (% style="color:inherit; font-family:inherit; font-size:23px" %)File path(%%) ==
++== (% style="color:inherit; font-family:inherit; font-size:23px" %)**File path**(%%) ==
  (% class="table-bordered" %)
  |=**Value**|=**Video File Path**|=**Description**
@@ -144,12 +144,12 @@
  |1|SD card|Please create a folder named mp4 in the SD card directory to store the video files to be played
  |2|HMI flash|Copy the video files to the mp4 folder in the directory of flash
--== Case ==
++== **Case** ==
--Operating Procedures of File List Object Settings
++**Operating Procedures of File List Object Settings**
  (% style="text-align:center" %)
--[[image:file setting.png]]
++[[image:11.Advanced Function_html_21e02c4465831a9e.png||height="560" width="600" class="img-thumbnail"]]
  Configure the customized object as the above picture
@@ -156,32 +156,35 @@
  Configure the file list object as below:
 . Select the directory as the MP4 folder in USB flash disk. Set the file name address as HDW150
++1. Create a folder named MP4 in the SD card directory to store the video files to be played.
 . Add the video controlling address, refer to the above video controlling address table.
 . Compile the project and download it to HMI, trigger the bit address to play the video from the list.
--== Demo ==
--
--**PI8150ig Video Display： **[[Download link>>https://docs.we-con.com.cn/bin/view/PIStudio/2%20Demo/Applications/#H7PI8150igVideoDisplay]]
--
  = **Email** =
++**Introduction**
++
  Wecon HMI can send email with information from fields to the specified email address as soon as the conditions is triggered, but email sending is based on the network.
--== Email setting ==
++== **Email setting** ==
--In "PIStudio" software, click "Project" → "E-mail" to open email function setting screen.
++In "PIStudio" software, click "Project"-> "E-mail" to open email function setting screen.
  (% style="text-align:center" %)
  [[image:邮件 1.png||height="780" width="597" class="img-thumbnail"]]
--**SMTP Settings**
++(**1) SMTP Settings**
--* **Sender Name: **Fill the sender's name, which is composed of Chinese characters, letters (case sensitive) and numbers. But it can not contain the following special English symbols:  ',', ';', '"', '<'. Maximum character length 32 is allowed.
--* **Password:** Fill in the password or authorization code of the mailbox. If the server needs to set the authorization code, the authorization code needs to be used. If the authorization code is not used, the password is used. Please refer to the SMTP service in the mailbox for the authorization code information. It cases sensitive, maximum character length 32 allowed in password.
--* **Confirm Password: **Confirm the password or authorization code of the mailbox.
--* **Email Address: **Fill in the sender's email address, case sensitive, maximum character length 32 allowed in it.Such as [[support@we-con.com.cn>>path:mailto:support@we-con.com.cn]].
--* **SMTP Server: **Please refer to the mailbox account settings. If you enter a common mailbox, the corresponding server address will be automatically written. such as smtp.exmail.qq.com.
++**1) Sender Name: **Fill the sender's name, which is composed of Chinese characters, letters (case sensitive) and numbers. But it can not contain the following special English symbols:  ',', ';', '"', '<'. Maximum character length 32 is allowed.
++**2) Password:** Fill in the password or authorization code of the mailbox. If the server needs to set the authorization code, the authorization code needs to be used. If the authorization code is not used, the password is used. Please refer to the SMTP service in the mailbox for the authorization code information. It cases sensitive, maximum character length 32 allowed in password.
++
++**3) Confirm Password: **Confirm the password or authorization code of the mailbox.
++
++**4) Email Address: **Fill in the sender's email address, case sensitive, maximum character length 32 allowed in it.Such as [[support@we-con.com.cn>>path:mailto:support@we-con.com.cn]].
++
++**5) SMTP Server: **Please refer to the mailbox account settings. If you enter a common mailbox, the corresponding server address will be automatically written. such as smtp.exmail.qq.com.
++
  (% class="table-bordered" %)
  |=Email|=Email server|=Port number
  |163 email|smtp.163.com|465
@@ -192,22 +192,29 @@
  |Yahoo email|smtp.mail.yahoo.com.cn|465
  |Google email|smtp.gmail.com|465
--**✎Note:** Gmail also needs to enable the [allow unsafe apps] option in the account, otherwise the mail will not be sent normally.
++**✎Note:**
++Gmail also needs to enable the [allow unsafe apps] option in the account, otherwise the mail will not be sent normally.
++
++**6) Encryption Type: **SSL is a security protocol that provides security and data integrity for network communications. It encrypts network connections at the transport layer; TLS (STARTTLS) upgrades connections to SSL instead of using a separate encrypted communication port.
++
++**7) The Port Number: **Enter corresponding port number according to the SMTP serve addrress entered. You could only enter interger between 1 and 65535. Do not enter more than 6 digits in length. Common port numbers are port 25, 465 and 587.
++
  (% style="list-style-type:disc" %)
--* **Encryption Type: **SSL is a security protocol that provides security and data integrity for network communications. It encrypts network connections at the transport layer; TLS (STARTTLS) upgrades connections to SSL instead of using a separate encrypted communication port.
--* **The Port Number: **Enter corresponding port number according to the SMTP serve addrress entered. You could only enter interger between 1 and 65535. Do not enter more than 6 digits in length. Common port numbers are port 25, 465 and 587.
--** Port 25: It does not protect the original data when transmitting data. The data can be seen. Generally, port 25 must be selected as no encryption or TLS(STARTTLS) encryption mode to send data correctly.
--** Port 465: It protect the original data when transmitting data. The data can not be seen. Generally, port 465 must be selected as SSL encryption mode to send data correctly.
--** Port 587: The original data is protected only after the TLS(STARTTLS) command is executed. Generally, port 587 must be selected as TLS(STARTTLS) encryption mode to send data correctly.
++* Port 25: It does not protect the original data when transmitting data. The data can be seen. Generally, port 25 must be selected as no encryption or TLS(STARTTLS) encryption mode to send data correctly.
++* Port 465: It protect the original data when transmitting data. The data can not be seen. Generally, port 465 must be selected as SSL encryption mode to send data correctly.
++* Port 587: The original data is protected only after the TLS(STARTTLS) command is executed. Generally, port 587 must be selected as TLS(STARTTLS) encryption mode to send data correctly.
  **✎Note: **Port 25 is open to SMTP servers, mainly for sending mail. But the port has vulnerability. Hackers often use port 25 to find SMTP servers to forward spam.
--* **Error Message**
--** Set the error message receiving address, you could use the information to get the reasons of errors.
--** The error types in the mail function are divided into two types: custom rule error and server's error.
--** Custom rule errors are as follows.
++**8) Error Message**
++Set the error message receiving address, you could use the information to get the reasons of errors.
++
++The error types in the mail function are divided into two types: custom rule error and server's error.
++
++Custom rule errors are as follows.
++
  (% class="table-bordered" %)
  |**Message**
  |Email settings are incorrect
@@ -248,7 +248,7 @@
  |could not connect: Connection refused
  |smtp-server: 550 User not found: aaa.163.com
--* **Manual Trigger**
++**9) Manual Trigger**
  It is for modifying the email sending settings when HMI is running. According to the set manual trigger address, the address is offset backward to get the address of the corresponding function (a total of 201 words). Take HDW100 as an example.
@@ -255,20 +255,18 @@
  (% class="table-bordered" %)
  |(% style="width:201px" %)**Address**|(% style="width:586px" %)**Description**
  |(% style="width:201px" %)HDX100.0|(% style="width:586px" %)Sending trigger
--|(% style="width:201px" %)HDX101.0~~101.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW101.0 set ON, and the address in group 1 will be in recipient list.
--|(% style="width:201px" %)HDX103.0~~103.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW103.0 set ON, and the address in group 1 will be in CC list.
--|(% style="width:201px" %)HDX105.0~~105.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW105.0 set ON, and the address in group 1 will be in BCC list (Secret delivery).
--|(% style="width:201px" %)HDW107~~171|(% style="width:586px" %)The subject length is limited to 64 words. (If it exceeds, it will intercept 64 words of content); The length of 65 words only use 64 actually, the 65th word address is reserved;
--|(% style="width:201px" %)HDW172~~300|(% style="width:586px" %)The content length is limited to 128 words. (If it exceeds, it will intercept 128 words of content)
--|(% style="width:201px" %)HDX301.0|(% style="width:586px" %)Whether to send an alarm record file as attachment
--(HMI V1.0 filename: AlarmDataFile.db)
--(HMI V2.0 filename: AlarmDataFile_0.db)
++|(% style="width:201px" %)HDX101.0 to HDX101.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW101.0 set ON, and the address in group 1 will be in recipient list.
++|(% style="width:201px" %)HDX103.0 to HDX103.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW103.0 set ON, and the address in group 1 will be in CC list.
++|(% style="width:201px" %)HDX105.0 to HDX105.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW105.0 set ON, and the address in group 1 will be in BCC list (Secret delivery).
++|(% style="width:201px" %)HDW107 to HDW171|(% style="width:586px" %)The subject length is limited to 64 words. (If it exceeds, it will intercept 64 words of content)
++|(% style="width:201px" %)HDW172 to HDW300|(% style="width:586px" %)The content length is limited to 128 words. (If it exceeds, it will intercept 128 words of content)
++|(% style="width:201px" %)HDX301.0|(% style="width:586px" %)Whether to send an alarm record attachment (a file named AlarmDataFile.db)
 . Emails that sent manually are not queued. Emails trigger by bit change, rising edge, falling edge and timing need to be sent in the sequence of triggering. The maximum value is 100, and those who are added after it is exceeded will be discarded. If an email is sending, it would send immediately after the current email is sent. If there is no email sending, it would send immediately.
 . If the trigger condition sent manually is the rising edge trigger, before the mail is sent, no new mail will be sent even if it is triggered again. No matter the email is sent successfully or not, the corresponding trigger would be OFF.
 . Emails that sent manually would only be sent once no matter the sending error is custom error, network or other errors.
--== Email sending settings ==
++== **Email sending settings** ==
  (% style="text-align:center" %)
  [[image:邮件 2.png||class="img-thumbnail"]]
@@ -280,7 +280,7 @@
  (% style="text-align:center" %)
  [[image:邮件 3.png||height="578" width="744" class="img-thumbnail"]]
--**Email sending configuration.**
++**(1) Email sending configuration.**
  * **Theme. **The value cannot be empty and case sensitive. The total length  cannot exceed 256 characters.
  * **Content of email. **The contents are divided into three combinations: text, alarm and variable. The list can contain only 32 items at most, and the total length of the preview cannot exceed 1024 items.
@@ -299,7 +299,7 @@
  **✎Note: **If the recipient address you select exists in all three positions, it exist only in the highest priority position. For example, if the recipient of an email has aaa, the bcc has aaa, and the cc  has aaa, then let aaa only be the recipient.
--== Recipient group setting ==
++== **Recipient group setting** ==
  (% style="text-align:center" %)
  [[image:邮件 4.png||class="img-thumbnail"]]
@@ -308,7 +308,7 @@
 . **Group to send. **The groups that you send the emails to.
 . **Open recipinet settings.** Set the information of recipients, and add and subtract groups.
--== Recipient setting ==
++== **Recipient setting** ==
  (% style="text-align:center" %)
  [[image:邮件 5.png||class="img-thumbnail"]]
@@ -324,7 +324,7 @@
 . **Nuber of group. **You could click the  up/down arrow to increase or devrease groups. The default number is 1. The maximum number is 16.
 . **Description. **To decribe the group information. The total length shall not exceed 32.
--== Test sending settings ==
++== **Test sending settings** ==
  (% style="text-align:center" %)
  [[image:邮件 7.png||class="img-thumbnail"]]
@@ -392,7 +392,7 @@
  |(% style="width:129px" %)416|(% style="width:946px" %)STARTTLS_NOT_SUPPORTED = The STARTTLS command is not supported by the server
  |(% style="width:129px" %)417|(% style="width:946px" %)LOGIN_NOT_SUPPORTED = AUTH LOGIN is not supported by the server
--== Email status ==
++== **Email status** ==
  **Network disconnection error**
@@ -426,7 +426,7 @@
  Currently, the email attachment function only supports sending the specified alarm record (AlarmDataFile.db file), and does not support selecting content to send.
--= USB keyboard =
++= **USB keyboard** =
  (% class="wikigeneratedid" id="HIntroduction" %)
  **Introduction**
@@ -435,14 +435,14 @@
 . When the keyboard function is enabled, the "Cursor Display" function is enabled by default. The user could move the cursor through the "up, down, left and right buttons" of the keyboard, and then press the Enter key to select the object.
 . Multiple devices could be connected with HMI via USB HUB (up to 4 external devices), such as: mouse, keyboard, scanner, magnetic stripe reader, etc.
--== Enable function ==
++== **Enable function** ==
--In the software PIStudio, Click "Project" → "Project settings" → "Extend", and check "Enable keyboard" in "Input device" settings area as below.
++In the software PIStudio, Click "Project" -> "Project settings"-> "Extend", and check "Enable keyboard" in "Input device" settings area as below.
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_f6cded728eedf4ce.png||height="567" width="501" class="img-thumbnail"]]
--== Configuration decription ==
++== **Configuration decription** ==
 . When the keyboard function is enabled, the "Cursor Display" function is enabled by default. The user could move the cursor through the “up, down, left and right buttons” of the keyboard, and then press the Enter key to select the object;
 . NumLock: When NumLock key is not lit, the keypad number is not allowed to be input (offline simulation does not allow all numeric keys to be input, including the numeric keys on the left side of the keyboard);
@@ -455,13 +455,13 @@
  In practical application, the [Enable Keyboard] function could be combined with the related "system special address" to achieve multi-key combination operation.
  (% class="table-bordered" %)
--|=(% style="width: 114px;" %)**Address**|=(% style="width: 229px;" %)**Description**|=(% style="width: 733px;" %)**Function**
--|(% style="width:114px" %)HSW1073|(% style="width:229px" %)Keyboard key value|(% style="width:733px" %)(((
++|=**Address**|=**Description**|=**Function**
++|HSW1073|Keyboard key value|(((
  The currently pressed key value is displayed. The key value is shown in Table 1
  (The Numeric/Character display object is not updated when it is being entered)
  )))
--|(% style="width:114px" %)HSW1074|(% style="width:229px" %)Keyboard key status|(% style="width:733px" %)(((
++|HSW1074|Keyboard key status|(((
  Display current key states
  ~=0: key release
@@ -472,15 +472,15 @@
  (The Numeric/Character display object is not updated when it is being entered)
  )))
--|(% style="width:114px" %)HSW1075|(% style="width:229px" %)Cursor speed|(% style="width:733px" %)Control the movement speed of the cursor, the range is 0~~100, the default is 20
--|(% style="width:114px" %)HSW1076|(% style="width:229px" %)X coordinate value of cursor|(% style="width:733px" %)The X value of the current position of the cursor, range: 0~~screen width-1
--|(% style="width:114px" %)HSW1077|(% style="width:229px" %)Y coordinate value of cursor|(% style="width:733px" %)The Y value of the current position of the cursor, range: 0~~screen height-1
--|(% style="width:114px" %)HSW1078|(% style="width:229px" %)The ASCII code of keyboard key|(% style="width:733px" %)(((
++|HSW1075|Cursor speed|Control the movement speed of the cursor, the range is 0~~100, the default is 20
++|HSW1076|X coordinate value of cursor|The X value of the current position of the cursor, range: 0~~screen width-1
++|HSW1077|Y coordinate value of cursor|The Y value of the current position of the cursor, range: 0~~screen height-1
++|HSW1078|The ASCII code of keyboard key|(((
  Only the ASCII values of letters, numbers, and symbols are displayed. The ASCII value of the function keys is not displayed, as shown in Table 2
  (The Numeric/Character display object is not updated when it is being entered)
  )))
--|(% style="width:114px" %)HSW1079|(% style="width:229px" %)Enable cursor position and Enter key mode|(% style="width:733px" %)(((
++|HSW1079|Enable cursor position and Enter key mode|(((
  HSX1079.0 = 1: Set the cursor position according to HSW1076 and HSW1077 value;
  HSX1079.1 = 0: When Numeric/Character display object is entered, enter key is for end input instruction. When no Numeric/Character display object is entered, enter key is for normal click;
@@ -569,7 +569,7 @@
  'HSW1078 ASCII value of key
--**Example 1**
++**(1) Example 1**
  {{code language="lua"}}
  if @W_HSW1073 = 29 then                                            'Ctrl key value is 29
@@ -587,7 +587,7 @@
  endif
  {{/code}}
--**Example 2**
++**(2) Example 2**
  {{code language="lua"}}
  if @W_HSW1073 = 59 and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then              'F1 key value is 59
@@ -601,7 +601,7 @@
  endif
  {{/code}}
--**Example 3**
++**(3) Example 3**
  {{code language="lua"}}
  if @W_HSW1073 = 60 and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then              'the value of F2 is 60
@@ -615,7 +615,7 @@
  endif
  {{/code}}
--**Example 4**
++**(4) Example 4**
  {{code language="lua"}}
  if AsString(@W_HSW1078) = "a" and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then          'Page up
@@ -629,7 +629,7 @@
  endif
  {{/code}}
--**Example 5**
++**(5) Example 5**
  {{code language="lua"}}
  if AsString(@W_HSW1078) = "b" and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then          'Page down
@@ -645,7 +645,7 @@
  endif
  {{/code}}
--= **rtsp web camera** =
++= **{{id name="_Toc29624"/}}rtsp web camera** =
  **Introduction**
@@ -714,7 +714,7 @@
  [[image:rtsp摄像头 2.png]]
--Compile and download project, please click [Search Camera] button to get camera information in LAN The username and password here need to be entered manually. During searching camera, it will try to use this username and password to log in IP camera and store the result of login. If the password is correct, the “password correct” address will be displayed as 1 and the device serial number will be displayed. If the “password correct” address is 0, the device serial number would not be displayed.
++3) Compile and download project, please click [Search Camera] button to get camera information in LAN The username and password here need to be entered manually. During searching camera, it will try to use this username and password to log in IP camera and store the result of login. If the password is correct, the “password correct” address will be displayed as 1 and the device serial number will be displayed. If the “password correct” address is 0, the device serial number would not be displayed.
  === **Function address** ===
@@ -757,14 +757,14 @@
  **Operating Procedures**
--Fill the camera ID address with the camera serial number searched by the camera search module, and trigger the binding address to fill username and password.
++1) Fill the camera ID address with the camera serial number searched by the camera search module, and trigger the binding address to fill username and password.
--* If the camera searching is disabled, then users need to manually enter the information of this camera, including username, password, and device serial number. Device serial number could be obtained by checking the label of camera.
++If the camera searching is disabled, then users need to manually enter the information of this camera, including username, password, and device serial number. Device serial number could be obtained by checking the label of camera.
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_9ba06415a43f4264.png||height="232" width="412" class="img-thumbnail"]]
--* If the IP CAMERA was triggered successfully, we could see the monitor screen and we could also set a alias for the camera and control the movement of the camera(up, down, left and right, some IP camera could not support the movement) or the screenshot. These operations could not be performed if camera off.
++2) If the IP CAMERA was triggered successfully, we could see the monitor screen and we could also set a alias for the camera and control the movement of the camera(up, down, left and right, some IP camera could not support the movement) or the screenshot. These operations could not be performed if camera off.
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_5e0967606b906db1.jpg||height="250" width="333" class="img-thumbnail"]]
@@ -772,9 +772,9 @@
  **✎Note:**
--* Camera configuration. When you get the camera, you need to activate the camera and enable the onvif protocol for the camera according to the user manual and tools provided by the camera manufacturer. If the configuration is not correct, the camera cannot be used on the HMI.
--* When reading camera information, you need to configure the user name and password for the camera. When multiple cameras are enabled, you are advised to set the user names and passwords of all cameras to be the same.
--* When using the camera function, ensure that the camera and HMI are on the same LAN. When the HMI is directly connected to the camera through a network cable, set both HMI and camera to static IP addresses as follows.
++1. Camera configuration. When you get the camera, you need to activate the camera and enable the onvif protocol for the camera according to the user manual and tools provided by the camera manufacturer. If the configuration is not correct, the camera cannot be used on the HMI.
++1. When reading camera information, you need to configure the user name and password for the camera. When multiple cameras are enabled, you are advised to set the user names and passwords of all cameras to be the same.
++1. When using the camera function, ensure that the camera and HMI are on the same LAN. When the HMI is directly connected to the camera through a network cable, set both HMI and camera to static IP addresses as follows.
  (% class="table-bordered" %)
  |=(% style="width: 166px;" %) |=(% style="width: 256px;" %)HMI|=(% style="width: 332px;" %)Camera
@@ -781,11 +781,12 @@
  |(% style="width:166px" %)IP address|(% style="width:256px" %)192.168.1.1|(% style="width:332px" %)192.168.1.2
  |(% style="width:166px" %)Gateway|(% style="width:256px" %)192.168.1.1|(% style="width:332px" %)192.168.1.1
--* You could obtain the camera from the "Camera Search module" in "Project parameters" or manually fill in the address. You can obtain resources for the camera display object in the Camera Search module or manually enter the parameters.
--* You are advised to configure and confirm the user name and password of the camera before using it. Do not use the wrong user name (password) to search for or link to the camera. Once the wrong user name (password) is exceeded for a certain number of times, the camera will be locked. During the lock period, the camera will reject any connection for at least half an hour generally.
--* When monitoring HMI cameras, do not monitor the same camera at the same time. Otherwise, the monitoring screen may be lost.
--* When the camera is disconnected due to network reasons, the system wouyld try to reconnect the camera every 20 seconds.
--* The alias of the camera is saved in the user database. The alias in old project is retained when downloading new project, if [user database] is selected. Otherwise the it will be deleted.
++(% start="4" %)
++1. You could obtain the camera from the "Camera Search module" in "Project parameters" or manually fill in the address. You can obtain resources for the camera display object in the Camera Search module or manually enter the parameters.
++1. You are advised to configure and confirm the user name and password of the camera before using it. Do not use the wrong user name (password) to search for or link to the camera. Once the wrong user name (password) is exceeded for a certain number of times, the camera will be locked. During the lock period, the camera will reject any connection for at least half an hour generally.
++1. When monitoring HMI cameras, do not monitor the same camera at the same time. Otherwise, the monitoring screen may be lost.
++1. When the camera is disconnected due to network reasons, the system wouyld try to reconnect the camera every 20 seconds.
++1. The alias of the camera is saved in the user database. The alias in old project is retained when downloading new project, if [user database] is selected. Otherwise the it will be deleted.
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_804b6a35561fc436.png||height="367" width="600" class="img-thumbnail"]]
@@ -796,6 +796,9 @@
  = **LAN Monitoring** =
++(% class="wikigeneratedid" id="H11.7.1Introduction" %)
++**Introduction**
++
  WECON provides [HMI Monitor System] software for user to monitor PI3000 series HMI in Local area network (LAN).
  This function is only for the model with -O. For example PI3070N-O.
@@ -802,11 +802,11 @@
  == **[HMI Monitor System] software** ==
--**Device List: **It displays HMIs, that connected into this monitor software;
++(1) Device List: It displays HMIs, that connected into this monitor software;
--**State Indicator:** It shows state of HMI, green means online, gray means offline;
++(2) State Indicator: It shows state of HMI, green means online, gray means offline;
--**Operation Buttons: **It provides three operations for HMI device;
++(3) Operation Buttons: It provides three operations for HMI device;
  * Add: Click it to open add setting window;
  * Delete: Click it to delete selected HMI device;
@@ -815,13 +815,13 @@
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_fdfb5186d5dd123d.png||height="302" width="600" class="img-thumbnail"]]
--== **Operating procedures** ==
++== **Operating Procedures** ==
--Click [Add] button to open setting window;
++(1) Click [Add] button to open setting window;
--Enter HMI IP and Note;
++(2) Enter HMI IP and Note;
--Click [Connection test] button;
++(3) Click [Connection test] button;
  * If IP is correct, it will display tip as below;
@@ -828,31 +828,33 @@
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_130ed411da07f4c4.png||height="376" width="550" class="img-thumbnail"]]
--* If IP is incorrect, it will display tip as below
++If IP is incorrect, it will display tip as below
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_878d04362f1b81b6.png||height="122" width="150" class="img-thumbnail"]]
--**✎Note:** For using this function in PC, it requires the setup of LAN Monitoring Firewall, using Windows 7 system as example. **If this function works well in your PC, please ignore below content.**
++**✎Note:**
++For using this function in PC, it requires the setup of LAN Monitoring Firewall, using Windows 7 system as example. **If this function works well in your PC, please ignore below content.**
++
  **Solution 1: Disable Firmware Completely**
--Open "Control Panel" and select "System Security".
++(1) Open [Control Panel] and select [System Security]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_9616a538bd5b8890.png||height="426" width="600" class="img-thumbnail"]]
--Select "Windows Firewall"
++(2) Select [Windows Firewall];
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_4ff5d9c605179616.png||height="427" width="600" class="img-thumbnail"]]
--Select "turn Windows Firewall on or off"
++(3) Select [turn Windows Firewall on or off]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_8cce81685e77dd93.png||height="532" width="850" class="img-thumbnail"]]
--Select "Turn off Windows Firewall"
++(4) Select [Turn off Windows Firewall]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_8e40bd24335bee5f.png||height="451" width="700" class="img-thumbnail"]]
@@ -859,47 +859,48 @@
  **Solution 2: Do not close the firewall, but allow HMIUI to pass through the firewall**
--Open Control Panel selection "system Security"
++(1) Open Control Panel selection [system Security]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_4a5370b15f8344bf.png||height="363" width="550" class="img-thumbnail"]]
--Select "Windows Firewall"
++(2) Select [Windows Firewall]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_3f00b4c76667d218.png||height="394" width="600" class="img-thumbnail"]]
--Select "run a program or function through Windows Firewall"
++(3) Select [run a program or function through Windows Firewall]
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_2ce833853fe2fe08.png||height="422" width="600" class="img-thumbnail"]]
--Select "Allow to run another program".
++(4) Select [Allow to run another program].
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_49e43fd3e9e58bc3.png||height="401" width="600" class="img-thumbnail"]]
--Select "browse" in the pop-up dialog box.
++(5) Select [browse] in the pop-up dialog box
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_714b05b4f66641fb.png||height="447" width="450"]]
--Locate the HMIUI.exe file in the HMIUI directory under the installation path of the monitoring software, and double-click HMIUI.exe.
++(6) Locate the HMIUI.exe file in the HMIUI directory under the installation path of the monitoring software, and double-click HMIUI.exe
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_cdf52e5522e2e568.png||height="596" width="600" class="img-thumbnail"]]
--Select "add".
++(7) Select add
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_2cf5b5f0c9aa4f7a.png||height="467" width="535" class="img-thumbnail"]]
--Check the corresponding options.
++(8) Check the corresponding options
++
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_ffc611cca1a173f9.png||height="361" width="600" class="img-thumbnail"]]
--select "OK".
++(9) select OK
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_934ebd63c53af3ee.png||height="442" width="600" class="img-thumbnail"]]
@@ -962,9 +962,9 @@
  At present, the Multi-link is regarded as special function. So not any model HMI support it. Need the HMI come with the special machine code. The series support Multi-link function right now: General, HMI+, i Series. Multi link doesn’t support the online simulaion. PI3000/PI3000+/PI3000i series can only have one Slave when using this function, while PI8000/9000,PI8000+/PI9000+ series can use at most 5 Slaves.
--== **PIStudio settings** ==
++== **PIStudio Settings** ==
--Check to enable Multi-link, select the corresponding option. For example, if it is a slave HMI, select Slave.
++(1) Check to enable Multi-link, select the corresponding option. For example, if it is a slave HMI, select Slave.
  (% style="text-align:center" %)
  [[image:多机互联.png||class="img-thumbnail"]]
@@ -971,12 +971,12 @@
  (% class="wikigeneratedid" %)
--Master IP address setting: Click "Project"→"Project settings"→"HMI IP", as below.
++(2) Master IP address setting: Click "Project"- "Project settings" - "HMI IP", as below.
  (% style="text-align:center" %)
  [[image:远程访问 1.png||height="516" width="594" class="img-thumbnail"]]
--== **Slave project** ==
++== **Slave Project** ==
  In order to let the fonts in the Slave and the Master consistent with each others, so Slave project needs to add one screen that can set the IP address of Master HMI for connecting to the Master, on the original the Master project. If Master project has components that use other font styles, and Slave project If there is no component corresponding to Master project, then the default font style SimSun would be displayed when the Multi-link is enabled. To avoid the Slave device prompts communication timeout message, you can add HSW9 = 1 in the initial script of Slave device.
@@ -999,7 +999,7 @@
  == **Notice** ==
--During the connection, if the Master is downloading program, there is a highly chances that the slave screen is abnormal, and the Gallery and imported pictures cannot be displayed.
++1) During the connection, if the Master is downloading program, there is a highly chances that the slave screen is abnormal, and the Gallery and imported pictures cannot be displayed.
  After the download process of Master HMI is finished, Slave needs to be restarted to monitor normally.
@@ -1016,7 +1016,7 @@
  = **V-NET Access (PC Side)** =
--== **Login interface** ==
++== **Login Interface** ==
  Enter the platform, as shown in Figure 1:
@@ -1031,7 +1031,7 @@
  Figure 1
--Enter the account and password, and then click the "Login" button.
++Enter the account and password, and then click the [Login] button.
  After successfully logging in, enter the "V-NET" interface, as shown in Figure 2. Add the HMI information you want to access through the "+" in the lower left corner.
@@ -1040,7 +1040,7 @@
  Figure 2
--After the Add Device window pops up, enter the machine code and password of the device to add the device, as shown in Figure 3:
++4. After the Add Device window pops up, enter the machine code and password of the device to add the device, as shown in Figure 3:
  (% style="text-align:center" %)
  [[image:11.Advanced Function_html_9b4cc907cf4a8c13.png||height="502" width="601" class="img-thumbnail"]]
@@ -1047,13 +1047,13 @@
  Figure 3
--* **Device machine code:** Each HMI has a unique and independent machine code, which is used to identify every remote device. (When binding multiple devices at the same time, the device passwords must be the same. Only one machine code can be entered on one line. When entering multiple machine codes, use the "Enter" key to change the line. If the format is wrong, the binding operation will fail and error will occur). Method of obtain machine code:
--** PIStudio → "Project" → "Tool"→ "Download" →Copy the machine code.
--** Long press the upper right corner of HMI to enter the backstage, you can see "Machine Id" in "Machine Info".
++* Device machine code: Each HMI has a unique and independent machine code, which is used to identify every remote device. (When binding multiple devices at the same time, the device passwords must be the same. Only one machine code can be entered on one line. When entering multiple machine codes, use the "Enter" key to change the line. If the format is wrong, the binding operation will fail and error will occur). Method of obtain machine code:
++** PIStudio -[Project]-[Tool]-[Download]-Copy the machine code.
++** Long press the upper right corner of HMI to enter the backstage, you can see [Machine Id] in "Machine Info".
  ** Obtain the machine code from the backlabel of the device.
--* **Device password**: Refers to the Cloud access password, the default is 6 digits 8 (888888). Please refer to the cloud configuration if you first time binding the device.
++* Device password: Refers to the Cloud access password, the default is 6 digits 8 (888888). Please refer to the cloud configuration if you first time binding the device.
  ** The length is 6 digits, English and special characters in English are allowed, spaces are not allowed, and cannot be empty.
--* **Device alias:** Refers to the name recognition of device in the menu bar of V-NET.
++* Device alias: Refers to the name recognition of device in the menu bar of V-NET.
  ** Maximum 12 digits, except ·_-+=}]",.?,;: ""”【】—()...! these Special characters allowed others are limited to input, no spaces or blanks are allowed.
  ** If the device is successfully bound, click OK, and it would prompt message: The device is bound successfully!
@@ -1062,7 +1062,7 @@
  **✎Note: **If you bind multiple machine codes in batch, the device alias will use the input device alias as the prefix, and the system will automatically add a suffix. Example: Default group (device alias)_1 (automatically added suffix).
  )))
--== **V-NET module** ==
++== **V-NET Module** ==
  **Remote Monitoring**
@@ -1149,10 +1149,10 @@
  Password: Refers to the cloud access password, the default is 6 digits 8 (888888); the cloud access password can be set and modified, the specific location is:
--* V-NET → specified HMI → Baisc → "password” → modify and save, as shown in Figure 10.
--* "Project" → "Cloud" → "Basic" → "Password" → of PIStudio (only unbind HMI can be modified), see Cloud Configuration.
++* V-NET —specified HMI—Baisc—Basic —"password”—modify and save, as shown in Figure 10.
++*  [Project]-[Cloud]-Basic-" Password" of PIStudio (only unbind HMI can be modified), see Cloud Configuration.
--Maximum storage of Alarm data: The maximum number of alarm data saved, with a range of 1 to 50000.
++Maximum storage of Alarm data: The maximum number of alarm data saved, with a range of 1-50000.
  Positioning:

file setting.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-21.2 KB

Content

视频功能部件配置.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.AiXia

Size

...	...	@@ -1,1 +1,0 @@
1		-10.5 KB

Content

Changes for page 10 Advanced Function

Summary

Details

Navigation

Table of Contents