10 Advanced Function

(% class="wikigeneratedid" %)

This chapter provides information about advanced functions in PIStudio. **These advanced functions work only on special HMI models.**

3

4

= **Audio** =

5

6

1. Audio playing could play audio on HMI. You need to configure the relevant information, triggered by the condition, broadcast the set the mp3 audio file. The audio file can only be stored in the flash mp3 file.

7

1. Only the 9000 Series HMIs with audio modules can use this feature, and an external 3.5mm headphone head is required.

== Configuration ==

In PIStudio software, the setting procedue is as follow.

12

13

(% style="text-align:center" %)

14

[[image:音频 1.png||height="655" width="528" class="img-thumbnail"]]

15

16

**Click "Set" to open "Audio settings" window.**

17

18

(% style="text-align:center" %)

19

[[image:11.Advanced Function_html_949272a66c003cd.png||height="402" width="588" class="img-thumbnail"]]

20

21

* Audio list: Display the audio files you added. Double click the audio to configure it.

22

* Add: Add a new audio file.

23

* Delete: Delete selected audio file.

24

* Audio set: Set the configurations of the audio, contolled by address.

25

26

**Trigger configuration for audio files**

27

28

(% style="text-align:center" %)

29

[[image:音频 2.png||class="img-thumbnail"]]

30

31

* **Audio files**

32

** MP3 file supported only.

33

** The audio filesize should be less than 30MB.

34

** The suffix .mp3 is necessary. The length of name should be less than 20 (including .mp3).

35

** Audio file needs to be saved into the folder named mp3 in HMI flash, if not, it would not play. User could use the ~[[[CopyFile>>path:#_CopyFile]]] script function to import audio files into the HMI flash.

36

* **Trigger mode settings: **There are 3 kinds trigger mode to choose. They coulf be valid at the same time.

37

** **Play according to time interval: **Set the interval time. For example ,set 3 minutes, then it will play for each 3 minutes' interval.

38

** **Trigger to play: **There are three bit trigger conditions: Rising edge, Falling edge and Bit change. You could trigger one condition to play the audio file.

39

** **Play according to time: **Play the audio when the time is up.

40

* **Play settings.** Set the play times and the cycle interval when it is triggered.

41

42

**Audio file playback setting**

43

44

This function is to control the playback of audio file in the list by address. (It should be used with file list.)

45

46

(% style="text-align:center" %)

47

[[image:音频 3.png||height="429" width="620" class="img-thumbnail"]]

48

49

== Control address ==

50

51

The table below describes each bit address function (including play, pause, etc). If the audio control address is HDW120, then specific function details are as shown in the table below.

52

53

(% class="table-bordered" %)

54

|=(% scope="row" %)**Function**|=(% style="width: 177px;" %)**Address**|=(% style="width: 647px;" %)**Description**

55

|(% rowspan="7" %)Play Control|(% style="width:177px" %)HDX120.0 (0(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Play control bit: Play the audio file when this bit address is triggered

56

|(% style="width:177px" %)HDX120.1 (1(% style="font-size:10.5px" %)st(%%) bit)|(% style="width:647px" %)Pause control bit: Pause playback when this bit address is triggered, or resume playback after pause

57

|(% style="width:177px" %)HDX120.2 (2(% style="font-size:10.5px" %)nd(%%) bit)|(% style="width:647px" %)Stop control bit: Stop the play when this bit address is triggered

58

|(% style="width:177px" %)HDX120.3 (3(% style="font-size:10.5px" %)rd(%%) bit)|(% style="width:647px" %)Last audio: Play last audio when this bit address is triggered.

59

|(% style="width:177px" %)HDX120.4 (4(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Next audio: Play next audio when this bit address is triggered.

60

|(% style="width:177px" %)HDX120.5 (5(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Volume increase(not supported yet), increase by 10

61

|(% style="width:177px" %)HDX120.6 (6(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Volume decrease(not supported yet), decrease by 10

62

|(% rowspan="4" %)Mode Selection|(% style="width:177px" %)HDX120.7 (7(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)once: Only play current audio file only one time

63

|(% style="width:177px" %)HDX120.8 (8(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Single cycle: Repeat playing current audio file

64

|(% style="width:177px" %)HDX120.9 (9(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Order: Play audio file orderly and stop as soon as the tas finished

65

|(% style="width:177px" %)HDX120.10 (10(% style="font-size:10.5px" %)th(%%) bit)|(% style="width:647px" %)Repeat in order: Repeat to play the audio file of the list

== State address ==

The audio play status address occupies a continuous 35 word addresses. If audio play status address is set as HDW200, the specific function allocation details are shown as below table

70

71

(% class="table-bordered" %)

72

|=(% scope="row" style="width: 183px;" %)**Address**|=(% style="width: 314px;" %)**Function**|=(% style="width: 592px;" %)**Description**

73

|=(% style="width: 183px;" %)HDW200|(% style="width:314px" %)Playback status storage address|(% style="width:592px" %)(((

~=0 : stop play

~=1 : playing

~=2 : pause play

)))

|=(% style="width: 183px;" %)HDW201|(% style="width:314px" %)Volume value storage address|(% style="width:592px" %)Range from 0 to 100(default value is 100, and it is not adjustable so fars

81

|=(% style="width: 183px;" %)HDW202~~HDW234|(% style="width:314px" %)Audio file name|(% style="width:592px" %)Displays the file name of the audio currently playing

82

83

(% class="box infomessage" %)

(((

✎**Note:**

* The audio file needs to be stored in the flash of PI9000 series HMI.

88

* Only PI9000 series HMI with audio module could support this function, and an external 3.5mm headphone is required.

)))

= **Video** =

**Introduction**

1. Configure related information and play video files through conditional trigger.

96

1. Only HMI 9000 and 8150ig series support this function.

97

1. Video playing could play video on HMI project screen.

98

1. It requires "Customized Object" and "File List" objects.

99

1. Currently, the video format support by Wecon HMI are including ASF, AVI, MKV, MP4, RM, and FLV.

100

1. Olny supports playback of 360P and 480P resolution video.

== Configuration ==

**Custom object configuration**

105

106

(% style="text-align:center" %)

107

[[image:视频功能部件配置.png]]

**Basic**

The function address doesn't have to be configured. DLL file name needs to be "Custom_MoviePlayer".

**Custom Address**

* ID1 is the address for storing the video file name (including the suffix). It could not be empty and the length is 32 words.

116

* ID2 is the address for video control, and occupies 1 word. It could not be empty. Please refer to[[ "Video control address">>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HControladdress-1]].

117

* ID3 is the address of video status, and occupies 1 word. It could not be empty. 0 indicate stop, and 1 indicates play.

118

* ID4 is the address for stroring the volume of video file, and occupies 1 word. 8150ig can not adjust the volume, only 9000 series can be set.

119

* ID5 is the address for the video file path, and occupies 1 word. It could not be empty. Please refer to [["Video file path">>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HFilepath]].

120

121

== Control address ==

122

123

(% class="table-bordered" %)

124

|=(% style="width: 151px;" %)**Function**|=(% colspan="2" style="width: 200px;" %)**Address**|=(% style="width: 599px;" %)**Description**

125

|(% rowspan="7" style="width:151px" %)Play Control|(% style="width:92px" %)0(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.0|(% style="width:599px" %)(((

126

Bit for playing control:This address save the name of the video file to be played.

127

)))

128

|(% style="width:92px" %)1(% style="font-size:10.5px" %)st(%%) bit|(% style="width:107px" %)HDX100.1|(% style="width:599px" %)Bit for pause control:Pause playing when this bit address is triggered, or resume playing after pause

129

|(% style="width:92px" %)2(% style="font-size:10.5px" %)nd(%%) bit|(% style="width:107px" %)HDX100.2|(% style="width:599px" %)Bit for full screen control: Maximize the video when this bit address is triggered

130

|(% style="width:92px" %)3(% style="font-size:10.5px" %)rd(%%) bit|(% style="width:107px" %)HDX100.3|(% style="width:599px" %)Last video: Play the last video when this bit address is triggered.

131

|(% style="width:92px" %)4(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.4|(% style="width:599px" %)Next video: Play the next video when this bit address is triggered.

132

|(% style="width:92px" %)5(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.5|(% style="width:599px" %)Volume increase: Increased by 10 （only be supported 9000 series）

133

|(% style="width:92px" %)6(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.6|(% style="width:599px" %)Volume decrease: Decreased by 10 （only be supported 9000 series）

134

|(% rowspan="4" style="width:151px" %)Mode Selection|(% style="width:92px" %)7(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.7|(% style="width:599px" %)Once: Only play current video file once

135

|(% style="width:92px" %)8(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.8|(% style="width:599px" %)Single cycle: Repeat to play current video file

136

|(% style="width:92px" %)9(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.9|(% style="width:599px" %)Order: Play video file of the list and stop after done

137

|(% style="width:92px" %)10(% style="font-size:10.5px" %)th(%%) bit|(% style="width:107px" %)HDX100.10|(% style="width:599px" %)Repeat in order: Repeat to play the video file of the list

138

139

== (% style="color:inherit; font-family:inherit; font-size:23px" %)File path(%%) ==

140

141

(% class="table-bordered" %)

142

|=**Value**|=**Video File Path**|=**Description**

143

|0|USB flash disk|Please create a folder named mp4 in the U disk directory to store the video files to be played

144

|1|SD card|Please create a folder named mp4 in the SD card directory to store the video files to be played

145

|2|HMI flash|Copy the video files to the mp4 folder in the directory of flash

== Case ==

Operating Procedures of File List Object Settings

150

151

(% style="text-align:center" %)

152

[[image:file setting.png]]

153

154

Configure the customized object as the above picture

155

156

Configure the file list object as below:

157

158

1. Select the directory as the MP4 folder in USB flash disk. Set the file name address as HDW150

159

1. Add the video controlling address, refer to the above video controlling address table.

160

1. Compile the project and download it to HMI, trigger the bit address to play the video from the list.

== Demo ==

**PI8150ig Video Display： **[[Download link>>https://docs.we-con.com.cn/bin/view/PIStudio/2%20Demo/Applications/#H7PI8150igVideoDisplay]]

= **Email** =

Wecon HMI can send email with information from fields to the specified email address as soon as the conditions is triggered, but email sending is based on the network.

== Email setting ==

In "PIStudio" software, click "Project" → "E-mail" to open email function setting screen.

173

174

(% style="text-align:center" %)

175

[[image:邮件 1.png||height="780" width="597" class="img-thumbnail"]]

**SMTP Settings**

* **Sender Name: **Fill the sender's name, which is composed of Chinese characters, letters (case sensitive) and numbers. However, it cannot contain some special English characters such as spaces( ), commas(,), semicolons(;), double quotes("), or less-than signs(<). Maximum character length 32 is allowed.

180

* **Password:** Fill in the password or authorization code of the mailbox. If the server needs to set the authorization code, the authorization code needs to be used. If the authorization code is not used, the password is used. Please refer to the SMTP service in the mailbox for the authorization code information. It cases sensitive, maximum character length 32 allowed in password.

181

* **Confirm Password: **Confirm the password or authorization code of the mailbox.

182

* **Email Address: **Fill in the sender's email address, case sensitive, maximum character length 32 allowed in it.Such as [[support@we-con.com.cn>>path:mailto:support@we-con.com.cn]].

183

* **SMTP Server: **Please refer to the mailbox account settings. If you enter a common mailbox, the corresponding server address will be automatically written. such as smtp.exmail.qq.com.

184

185

(% class="table-bordered" %)

186

|=Email|=Email server|=Port number

187

|163 email|smtp.163.com|465

188

|126 email|smtp.126.com|465

189

|QQ email|smtp.qq.com|465

190

|Sina email|smtp.sina.com|465

191

|Sohu email|smtp.sohu.com|465

192

|Yahoo email|smtp.mail.yahoo.com.cn|465

193

|Google email|smtp.gmail.com|465

194

195

(% class="box infomessage" %)

196

(((

197

**✎Note:** Gmail also needs to enable the [allow unsafe apps] option in the account, otherwise the mail will not be sent normally.

198

)))

199

200

(% style="list-style-type:disc" %)

201

* **Encryption Type: **SSL is a security protocol that provides security and data integrity for network communications. It encrypts network connections at the transport layer; TLS (STARTTLS) upgrades connections to SSL instead of using a separate encrypted communication port.

202

* **The Port Number: **Enter corresponding port number according to the SMTP serve addrress entered. You could only enter interger between 1 and 65535. Do not enter more than 6 digits in length. Common port numbers are port 25, 465 and 587.

203

** Port 25: It does not protect the original data when transmitting data. The data can be seen. Generally, port 25 must be selected as no encryption or TLS(STARTTLS) encryption mode to send data correctly.

204

** Port 465: It protect the original data when transmitting data. The data can not be seen. Generally, port 465 must be selected as SSL encryption mode to send data correctly.

205

** Port 587: The original data is protected only after the TLS(STARTTLS) command is executed. Generally, port 587 must be selected as TLS(STARTTLS) encryption mode to send data correctly.

206

207

(% class="box infomessage" %)

208

(((

209

**✎Note: **Port 25 is open to SMTP servers, mainly for sending mail. But the port has vulnerability. Hackers often use port 25 to find SMTP servers to forward spam.

)))

* **Error Message**

** Set the error message receiving address, you could use the information to get the reasons of errors.

214

** The error types in the mail function are divided into two types: custom rule error and server's error.

215

** Custom rule errors are as follows.

216

217

(% class="table-bordered" %)

218

|**Message**

219

|Email settings are incorrect

220

|Email account is incorrect

221

|Email password could not include blank

222

|the settings of SMTP server are incorrect

223

|The range of SMTP server ports number should be integer, which is between 1 and 65535.

224

|The type of encryption for SMTP is incorrect

225

|The name of sender or email address setting is incorrect.

226

|The names of Recipients or email address setting are incorrect.

227

|The names of CC recipients or email address setting are incorrect.

228

|The names of Secret delivery recipients or email address setting are incorrect.

229

|Email topic could not be blank

230

|Email content could not be blank

231

|Total size of attachments should be below 25M

232

|Attachment "xxxx" is nonexistent

233

234

Server's errors are as follows.

235

236

(% class="table-bordered" %)

237

|**Message**

238

|smtp-server: 554 DT: SPM

239

|smtp-server: 550 RP: TRC

240

|smtp-server: 550 Limitation of connecting counts

241

|smtp-server: 535

242

|smtp-server: 550 Error: Content rejected

243

|smtp-server: 451 Internal server error

244

|smtp-server: 535 Invalid login user or password

245

|smtp-server: 550 too many sending requests today

246

|smtp-server: 452 Too many recipients received this hour.

247

|smtp-server: 535 Error: Authentication failed, system busy

248

|could not connect: Connection timed out

249

|Unexpected EOF on SMTP connection

250

|could not initiate SSL/TLS connection

251

|smtp-server: 530 Need to issue a STARTTLS command first.

252

|could not resolve host

253

|could not connect: Connection timed out

254

|could not connect: Connection refused

255

|smtp-server: 550 User not found: aaa.163.com

* **Manual Trigger**

It is for modifying the email sending settings when HMI is running. According to the set manual trigger address, the address is offset backward to get the address of the corresponding function (a total of 201 words). Take HDW100 as an example.

260

261

(% class="table-bordered" %)

262

|(% style="width:201px" %)**Address**|(% style="width:586px" %)**Description**

263

|(% style="width:201px" %)HDX100.0|(% style="width:586px" %)Sending trigger

264

|(% style="width:201px" %)HDX101.0~~101.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW101.0 set ON, and the address in group 1 will be in recipient list.

265

|(% style="width:201px" %)HDX103.0~~103.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW103.0 set ON, and the address in group 1 will be in CC list.

266

|(% style="width:201px" %)HDX105.0~~105.15|(% style="width:586px" %)It is used for triggering recipient groups, for example, HDW105.0 set ON, and the address in group 1 will be in BCC list (Secret delivery).

267

|(% style="width:201px" %)HDW107~~171|(% style="width:586px" %)The subject length is limited to 64 words. (If it exceeds, it will intercept 64 words of content); The length of 65 words only use 64 actually, the 65th word address is reserved;

268

|(% style="width:201px" %)HDW172~~300|(% style="width:586px" %)The content length is limited to 128 words. (If it exceeds, it will intercept 128 words of content)

269

|(% style="width:201px" %)HDX301.0|(% style="width:586px" %)Whether to send an alarm record file as attachment

270

(HMI V1.0 filename: AlarmDataFile.db)

271

(HMI V2.0 filename: AlarmDataFile_0.db)

272

273

1. Emails that sent manually are not queued. Emails trigger by bit change, rising edge, falling edge and timing need to be sent in the sequence of triggering. The maximum value is 100, and those who are added after it is exceeded will be discarded. If an email is sending, it would send immediately after the current email is sent. If there is no email sending, it would send immediately.

274

1. If the trigger condition sent manually is the rising edge trigger, before the mail is sent, no new mail will be sent even if it is triggered again. No matter the email is sent successfully or not, the corresponding trigger would be OFF.

275

1. Emails that sent manually would only be sent once no matter the sending error is custom error, network or other errors.

276

277

== Email sending settings ==

278

279

(% style="text-align:center" %)

280

[[image:邮件 2.png||class="img-thumbnail"]]

281

282

1. **Add. **A maximum of 1024 email can be added.

283

1. **Modify.** Select an email to modify the content and configuration.

284

1. **Delete. **You could select an email to delete or click the "ID" column to delete in batch.

285

286

(% style="text-align:center" %)

287

[[image:邮件 3.png||height="578" width="744" class="img-thumbnail"]]

288

289

**Email sending configuration.**

290

291

* **Theme. **The value cannot be empty and case sensitive. The total length cannot exceed 256 characters.

292

* **Content of email. **The contents are divided into three combinations: text, alarm and variable. The list can contain only 32 items at most, and the total length of the preview cannot exceed 1024 items.

293

** **Text. **You could directly edit the text of language 1 to language 3. If you need to set multiple languages, click "edit all text" to set. You may also select "Text library". The content is case sensitive, and the total length of English/Chinese characters/numbers/symbols does not exceed 253.

294

** **Alarm. **You could select "bit alarm" or "word alarm" from the list. The content is from alarm text. if the alarm changes, the content changes with it. The content is case sensitive, and the total length of English/Chinese characters/numbers/symbols does not exceed 253.

295

** **Variable. **Set the corresponding variable address. Read value or strings according to the specified format, and the read information will be displayed in the corresponding position in the mail content.

296

* **Preview. **Combine the content of current edited email and diaplay it for you to modify the content conviniently. The preview length cannot exceed 1024.

297

* **Sending method. **It is divided into timed send interval and bit address trigger tranmission. The two methods cannot be used at the same time.

298

** timed send interval. After booting, the current system time is used to start calculating, and each time the time is up, the information will be sent to the set recipient in the form of an email, and the minimum time should be set to 5 minutes. **Note: **The first boot is not sent.

299

** Bit address trigger tranmission. When the set trigger address meets the trigger conditon, the information will be sent to the set recipient in the form of an email. If the content select alarm, the alarm address would be written in the trigger address. There are three methods to trigger: sending on rising edge, sending on falling edge and send when the bit changes.

300

* **Recipient.** It is set in groups. You could send multiple groups, and each group can have multiple recipients.

301

* **Add CC.** Sends the current email to other recipients.

302

* **Add secret delivery. ** Sends the current email to other recipients, but the recipient and cc recipients do not see the BCC recipient.

303

* when sending an email, you must set a recipient. CC recipients and BCC recipients are not to be set. The total number of recipinet, CC recipients and BCC recipients is 40.

304

* **Recipient priority. **Set the priority order of recipients to recipient, BCC, and CC.

305

306

(% class="box infomessage" %)

307

(((

308

**✎Note: **If the recipient address you select exists in all three positions, it exist only in the highest priority position. For example, if the recipient of an email has aaa, the bcc has aaa, and the cc has aaa, then let aaa only be the recipient.

309

)))

310

311

== Recipient group setting ==

312

313

(% style="text-align:center" %)

314

[[image:邮件 4.png||class="img-thumbnail"]]

315

316

1. **All Group.** The groups you added.

317

1. **Group to send. **The groups that you send the emails to.

318

1. **Open recipinet settings.** Set the information of recipients, and add and subtract groups.

319

320

== Recipient setting ==

321

322

(% style="text-align:center" %)

323

[[image:邮件 5.png||class="img-thumbnail"]]

324

325

1. **Add. **Add a recipient. There are non-dynamic recipient and dynamic recipient. They cannot be used at the same time. You may just fill in the recipient's name and email address. The dynamic recipient address is limited to 32 characters, and a maximum of 40 recipients can be added.

326

327

(% style="text-align:center" %)

328

[[image:邮件 6.png||class="img-thumbnail"]]

329

330

(% start="2" style="list-style-type:decimal" %)

331

1. **Modify. **Select one recipient and click "modify" or double click the recipient to modify. If it is non-dynamic recipient, you could modify the name and email address. The email is unique. If it is dynamic recipient, you could modify the address, and the address is unique.

332

1. **Delete.** Select one recipient or multiple recipents to delete, or click the ID column to select all.

333

1. **Nuber of group. **You could click the up/down arrow to increase or devrease groups. The default number is 1. The maximum number is 16.

334

1. **Description. **To decribe the group information. The total length shall not exceed 32.

335

336

== Test sending settings ==

337

338

(% style="text-align:center" %)

339

[[image:邮件 7.png||class="img-thumbnail"]]

340

341

(% class="box infomessage" %)

342

(((

343

(% class="wikigeneratedid" %)

344

**✎Note: **

345

346

1. You can open this after the SMTP server is set.

347

1. When NetEase mail (126, 163 and yeah) occurs erros 554, it may be that the mailbox used is restricted by the anti-spam mechanism, and the performance may be that it cannot send emails in bulk or directly.

348

1. When TOM mail is sender's mail, the name of it and the recipient tested must be English, otherwise the email would be returned.

349

1. When testing with Zoho mailbox, there was a delay of less than 3 minutes.

350

1. The custom errors for the test error is as follows.

351

)))

352

353

(% class="table-bordered" %)

354

|=(% style="width: 129px;" %)Error code|=(% style="width: 946px;" %)Cause of reason

355

|(% style="width:129px" %)0|(% style="width:946px" %)CSMTP_NO_ERROR

356

|(% style="width:129px" %)100|(% style="width:946px" %)WSA_STARTUP = Unable to initialize winsock2

357

|(% style="width:129px" %)101|(% style="width:946px" %)WSA_VER = Wrong version of the winsock2

358

|(% style="width:129px" %)102|(% style="width:946px" %)WSA_SEND = Function send() failed

359

|(% style="width:129px" %)103|(% style="width:946px" %)WSA_RECV = Function recv() failed

360

|(% style="width:129px" %)104|(% style="width:946px" %)WSA_CONNECT = Function connect failed

361

|(% style="width:129px" %)105|(% style="width:946px" %)WSA_GETHOSTBY_NAME_ADDR = Unable to determine remote server

362

|(% style="width:129px" %)106|(% style="width:946px" %)WSA_INVALID_SOCKET = Invalid winsock2 socket

363

|(% style="width:129px" %)107|(% style="width:946px" %)WSA_HOSTNAME = Function hostname() failed

364

|(% style="width:129px" %)108|(% style="width:946px" %)WSA_IOCTLSOCKET = Function ioctlsocket() failed

365

|(% style="width:129px" %)109|(% style="width:946px" %)WSA_SELECT

366

|(% style="width:129px" %)110|(% style="width:946px" %)BAD_IPV4_ADDR = Improper IPv4 address

367

|(% style="width:129px" %)200|(% style="width:946px" %)UNDEF_MSG_HEADER = Undefined message header

368

|(% style="width:129px" %)201|(% style="width:946px" %)UNDEF_MAIL_FROM = Undefined mail sender

369

|(% style="width:129px" %)202|(% style="width:946px" %)UNDEF_SUBJECT = Undefined message subject

370

|(% style="width:129px" %)203|(% style="width:946px" %)UNDEF_RECIPIENTS = Undefined recipient

371

|(% style="width:129px" %)204|(% style="width:946px" %)UNDEF_RECIPIENT_MAIL = Undefined mail recipent

372

|(% style="width:129px" %)205|(% style="width:946px" %)UNDEF_LOGIN = Undefined user login

373

|(% style="width:129px" %)206|(% style="width:946px" %)UNDEF_PASSWORD = Undefined user password

374

|(% style="width:129px" %)207|(% style="width:946px" %)BAD_LOGIN_PASSWORD = Invalid user login or password

375

|(% style="width:129px" %)208|(% style="width:946px" %)BAD_DIGEST_RESPONSE = Server returned a bad digest MD5 response

376

|(% style="width:129px" %)209|(% style="width:946px" %)BAD_SERVER_NAME = Unable to determine server name for digest MD5 response

377

|(% style="width:129px" %)300|(% style="width:946px" %)COMMAND_MAIL_FROM = Server returned error after sending MAIL FROM

378

|(% style="width:129px" %)301|(% style="width:946px" %)COMMAND_EHLO = Server returned error after sending EHLO

379

|(% style="width:129px" %)302|(% style="width:946px" %)COMMAND_AUTH_PLAIN = Server returned error after sending AUTH PLAIN

380

|(% style="width:129px" %)303|(% style="width:946px" %)COMMAND_AUTH_LOGIN = Server returned error after sending AUTH LOGIN

381

|(% style="width:129px" %)304|(% style="width:946px" %)COMMAND_AUTH_CRAMMD5 = Server returned error after sending AUTH CRAM-MD5

382

|(% style="width:129px" %)305|(% style="width:946px" %)COMMAND_AUTH_DIGESTMD5 = Server returned error after sending AUTH DIGEST-MD5

383

|(% style="width:129px" %)306|(% style="width:946px" %)COMMAND_DIGESTMD5 = Server returned error after sending MD5 DIGEST

384

|(% style="width:129px" %)307|(% style="width:946px" %)COMMAND_DATA = Server returned error after sending DATA

385

|(% style="width:129px" %)308|(% style="width:946px" %)COMMAND_QUIT = Server returned error after sending QUIT

386

|(% style="width:129px" %)309|(% style="width:946px" %)COMMAND_RCPT_TO = Server returned error after sending RCPT TO

387

|(% style="width:129px" %)310|(% style="width:946px" %)MSG_BODY_ERROR = Error in message body (邮件正文中出现错误)

388

|(% style="width:129px" %)400|(% style="width:946px" %)CONNECTION_CLOSED = Server has closed the connection

389

|(% style="width:129px" %)401|(% style="width:946px" %)SERVER_NOT_READY = Server is not ready

390

|(% style="width:129px" %)402|(% style="width:946px" %)SERVER_NOT_RESPONDING = Server not responding

391

|(% style="width:129px" %)403|(% style="width:946px" %)SELECT_TIMEOUT

392

|(% style="width:129px" %)404|(% style="width:946px" %)FILE_NOT_EXIST = File not exist

393

|(% style="width:129px" %)405|(% style="width:946px" %)MSG_TOO_BIG = Message is too big

394

|(% style="width:129px" %)406|(% style="width:946px" %)BAD_LOGIN_PASS = Bad login or password

395

|(% style="width:129px" %)407|(% style="width:946px" %)UNDEF_XYZ_RESPONSE = Undefined xyz SMTP response

396

|(% style="width:129px" %)408|(% style="width:946px" %)LACK_OF_MEMORY = Lack of memory

397

|(% style="width:129px" %)409|(% style="width:946px" %)TIME_ERROR = time() error

398

|(% style="width:129px" %)410|(% style="width:946px" %)RECVBUF_IS_EMPTY = RecvBuf is empty

399

|(% style="width:129px" %)411|(% style="width:946px" %)SENDBUF_IS_EMPTY = SendBuf is empty

400

|(% style="width:129px" %)412|(% style="width:946px" %)OUT_OF_MSG_RANGE = Specified line number is out of message size

401

|(% style="width:129px" %)413|(% style="width:946px" %)COMMAND_EHLO_STARTTLS = Server returned error after sending STARTTLS

402

|(% style="width:129px" %)414|(% style="width:946px" %)SSL_PROBLEM = SSL problem

403

|(% style="width:129px" %)415|(% style="width:946px" %)SSL_PROBLEM = SSL problem

404

|(% style="width:129px" %)416|(% style="width:946px" %)STARTTLS_NOT_SUPPORTED = The STARTTLS command is not supported by the server

405

|(% style="width:129px" %)417|(% style="width:946px" %)LOGIN_NOT_SUPPORTED = AUTH LOGIN is not supported by the server

== Email status ==

**Network disconnection error**

410

411

If the fault is determined as a network disconnection error, the system does not delete the sent information and does not record the number of errors, and it would make an infinite send attempt.

412

413

**Custom rule error**

414

415

If the fault is determined as a custom rule error, delete the information.

416

417

**Server return error**

418

419

If the fault is determined as a server return error, then the error time add 1. It would try to send the email for 3 times. Regardless of whether the transmission is successful or not, it would delete the email to be sent. The test results are as follows.

420

421

(% class="table-bordered" %)

422

|=(% style="width: 125px;" %)**Server name**|=(% style="width: 186px;" %)**The number of sent**|=(% style="width: 765px;" %)**Consequences of exceeding the limit**

423

|(% style="width:125px" %)126|(% style="width:186px" %)160|(% style="width:765px" %)No more delivery on that day

424

|(% style="width:125px" %)163|(% style="width:186px" %)160|(% style="width:765px" %)No more delivery on that day

425

|(% style="width:125px" %)we-con|(% style="width:186px" %)800|(% style="width:765px" %)No more delivery on that day

426

|(% style="width:125px" %)qq|(% style="width:186px" %)50|(% style="width:765px" %)It can be sent again after a few minutes or a few hours

427

|(% style="width:125px" %)sohu|(% style="width:186px" %)160|(% style="width:765px" %)No more delivery on that day

428

|(% style="width:125px" %)sina|(% style="width:186px" %)50|(% style="width:765px" %)It can be sent again after a few minutes or a few hours, but cannont be received normally

429

|(% style="width:125px" %)gmail|(% style="width:186px" %)500|(% style="width:765px" %)No more delivery on that day

**Message Prompt**

1. If the email to be sent is deleted, a message will pop up.

434

1. If the email is sent successfully, a messge will pop up: "The email is sent successfully."

435

1. If the five symbols ',' , ' | ', '<', '>' and '&' appear in the fields set by the message prompt, the message prompt will display an abnormal message.

**Mail attachment**

Currently, the email attachment function only supports sending the specified alarm record (AlarmDataFile.db file), and does not support selecting content to send.

= USB keyboard =

(% class="wikigeneratedid" id="HIntroduction" %)

444

**Introduction**

445

446

1. HMI support keyboard via USB port of HMI.

447

1. When the keyboard function is enabled, the "Cursor Display" function is enabled by default. The user could move the cursor through the "up, down, left and right buttons" of the keyboard, and then press the Enter key to select the object.

448

1. Multiple devices could be connected with HMI via USB HUB (up to 4 external devices), such as: mouse, keyboard, scanner, magnetic stripe reader, etc.

449

450

== Enable function ==

451

452

In the software PIStudio, Click "Project" → "Project settings" → "Extend", and check "Enable keyboard" in "Input device" settings area as below.

453

454

(% style="text-align:center" %)

455

[[image:11.Advanced Function_html_f6cded728eedf4ce.png||height="567" width="501" class="img-thumbnail"]]

456

457

== Configuration decription ==

458

459

1. When the keyboard function is enabled, the "Cursor Display" function is enabled by default. The user could move the cursor through the “up, down, left and right buttons” of the keyboard, and then press the Enter key to select the object;

460

1. NumLock: When NumLock key is not lit, the keypad number is not allowed to be input (offline simulation does not allow all numeric keys to be input, including the numeric keys on the left side of the keyboard);

461

1. Key combination: (1) "Shift" + the left side of the keyboard and the special symbol button, to achieve special character input, such as: ~~ ! @ # $ % ^ & * ( ) _ + { } : "<> ? ;

462

1. Use the system special addresses "HSW1073 and HSW1074" to write custom key combinations in the script (currently only two key combinations are supported);

463

1. Caps Lock: In lowercase mode, shift+ letters, to enter uppercase; in uppercase mode, shift+ letters enter lowercase;

464

465

== **System special address** ==

466

467

In practical application, the [Enable Keyboard] function could be combined with the related "system special address" to achieve multi-key combination operation.

468

469

(% class="table-bordered" %)

470

|=(% style="width: 114px;" %)**Address**|=(% style="width: 229px;" %)**Description**|=(% style="width: 733px;" %)**Function**

471

|(% style="width:114px" %)HSW1073|(% style="width:229px" %)Keyboard key value|(% style="width:733px" %)(((

472

The currently pressed key value is displayed. The key value is shown in Table 1

473

474

(The Numeric/Character display object is not updated when it is being entered)

475

)))

476

|(% style="width:114px" %)HSW1074|(% style="width:229px" %)Keyboard key status|(% style="width:733px" %)(((

477

Display current key states

~=0: key release

~=1: key press

~=2: Press and hold long

484

485

(The Numeric/Character display object is not updated when it is being entered)

486

)))

487

|(% style="width:114px" %)HSW1075|(% style="width:229px" %)Cursor speed|(% style="width:733px" %)Control the movement speed of the cursor, the range is 0~~100, the default is 20

488

|(% style="width:114px" %)HSW1076|(% style="width:229px" %)X coordinate value of cursor|(% style="width:733px" %)The X value of the current position of the cursor, range: 0~~screen width-1

489

|(% style="width:114px" %)HSW1077|(% style="width:229px" %)Y coordinate value of cursor|(% style="width:733px" %)The Y value of the current position of the cursor, range: 0~~screen height-1

490

|(% style="width:114px" %)HSW1078|(% style="width:229px" %)The ASCII code of keyboard key|(% style="width:733px" %)(((

491

Only the ASCII values of letters, numbers, and symbols are displayed. The ASCII value of the function keys is not displayed, as shown in Table 2

492

493

(The Numeric/Character display object is not updated when it is being entered)

494

)))

495

|(% style="width:114px" %)HSW1079|(% style="width:229px" %)Enable cursor position and Enter key mode|(% style="width:733px" %)(((

496

HSX1079.0 = 1: Set the cursor position according to HSW1076 and HSW1077 value;

497

498

HSX1079.1 = 0: When Numeric/Character display object is entered, enter key is for end input instruction. When no Numeric/Character display object is entered, enter key is for normal click;

499

500

HSX1079.1 = 1: Enter key only for normal click, not for keyboard end input instruction;

501

)))

502

503

**Key-Value Appendix Table (Decimal) (104Keys)**

504

505

(% class="table-bordered" %)

506

|=**Key**|=**Value**|=**Key**|=**Value**|=**Key**|=**Value**

507

|ESC|1|i I|23|Alt (Right)|100

508

|F1|59|o O|24|windows(Right)|126

509

|F2|60|p P|25|Menu|127

510

|F3|61|[ {|26|Right_ctrl|97

511

|F4|62|] }|27|Print Screen|99

512

|F5|63|Enter|28|ScrollLock|70

513

|F6|64|CapsLock|58|PauseBreak|119

514

|F7|65|a A|30|Insert|110

515

|F8|66|s S|31|Home|102

516

|F9|67|d D|32|PageUp|104

517

|F10|68|f F|33|Delete|111

518

|F11|87|g G|34|End|107

519

|F12|88|h H|35|PageDown|109

520

|` ~~|41|j J|36|↑|103

|1 !|2|k K|37|↓|108

|2 @|3|l L|38|←|105

|3 #|4|; :|39|→|106

|4 $|5|' "|40|NumLock (Keypad)|69

525

|5%|6|\ ~||43|/ (Keypad)|98

526

|6 ^|7|Shift (Left)|42|* (Keypad)|55

527

|7 &|8|z Z|44|-　(Keypad)|74

528

|8 *|9|x X|45|+　(Keypad)|78

529

|9 (|10|c C|46|Enter (Keypad)|96

530

|0 )|11|v V|47|. (Keypad)|83

531

|- _|12|b B|48|0 (Keypad)|82

532

|+ =|13|n N|49|1 (Keypad)|79

533

|Backspace|14|m M|50|2 (Keypad)|80

534

|Tab|15|, <|51|3 (Keypad)|81

535

|q Q|16|. >|52|4 (Keypad)|75

536

|w W|17|/ ?|53|5 (Keypad)|76

537

|e E|18|Shift (Right)|54 |6 (Keypad)|77

538

|r R|19|Ctrl (Left)|29|7 (Keypad)|71

539

|t T|20|Windows(Left)|125|8 (Keypad)|72

540

|Y y|21|Alt (Left)|56|9 (Keypad)|73

|u U|22|space|57| |

**ASCII Code**

(% class="table-bordered" %)

546

547

|32|space|56|8|80|P|104|h

548

|33|!|57|9|81|Q|105|i

549

|34|"|58|:|82|R|106|j

550

|35|#|59|;|83|S|107|k

551

|36|$|60|<|84|T|108|l

552

|37| %|61|= |85|U|109|m

553

|38|&|62|>|86|V|110|n

554

|39|'|63|?|87|W|111|o

555

|40|(|64|@|88|X|112|p

556

|41|)|65|A|89|Y|113|q

557

|42|*|66|B|90|Z|114|r

558

|43|+|67|C|91|[|115|s

559

|44|,|68|D|92|\|116|t

560

|45|-|69|E|93|]|117|u

561

|46|.|70|F|94|^|118|v

562

|47|/|71|G|95|_|119|w

563

|48|0|72|H|96|`|120|x

564

|49|1|73|I|97|a|121|y

565

|50|2|74|J|98|b|122|z

566

|51|3|75|K|99|c|123|{

567

|52|4|76|L|100|d|124|~|

568

|53|5|77|M|101|e|125|}

569

|54|6|78|N|102|f|126|~~

570

|55|7|79|O|103|g| |

571

572

== **Scripts example** ==

'HSW1073 key value

'HSW1074 key states

* 0: released;

* 1: pressed;

* 2: Holding pressed

'HSW1078 ASCII value of key

**Example 1**

if @W_HSW1073 = 29 then 'Ctrl key value is 29

588

589

if @W_HSW1074 = 1 or @W_HSW1074 = 2 'Press Ctrl key

@W_HDW1000 = 1

else 'Release Ctrl key

@W_HDW1000 = 0

endif

endif

**Example 2**

if @W_HSW1073 = 59 and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then 'F1 key value is 59

606

607

if @W_HDW1000 = 1 then 'Combination Ctrl + F1

608

609

@W_HDW2000 = @W_HDW2000 + 1 'Function of combination key is HDW2000 + 1

endif

endif

**Example 3**

if @W_HSW1073 = 60 and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then 'the value of F2 is 60

620

621

if @W_HDW1000 = 1 then 'Combination Ctrl + F2

622

623

@W_HDW2000 = @W_HDW2000 - 1 'Function of combination key is HDW2000 - 1

endif

endif

**Example 4**

if AsString(@W_HSW1078) = "a" and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then 'Page up

if @W_HSW13 > 0 then

@W_HSW13 = @W_HSW13 - 1

endif

endif

**Example 5**

if AsString(@W_HSW1078) = "b" and (@W_HSW1074 = 1 or @W_HSW1074 = 2) then 'Page down

648

649

@W_HSW13 = @W_HSW13 + 1

if @W_HSW13 > 3 then

@W_HSW13 = 3

endif

endif

= Camera =

Wecon has a variety of HMIs that support IP cameras and EZVIZ cameras, and the displays differ between different models;

663

664

(% style="margin-left:auto; margin-right:auto; width:332.222px" %)

665

|=(% style="width: 144px;" %)IP camera|=(% style="width: 100px;" %)PI3000ig|=(% style="width: 84px;" %)PI8000ig

666

|=(% style="width: 144px;" %)HMI display|(% style="width:100px" %)X|(% style="width:84px" %)✔

667

|=(% style="width: 144px;" %)LAN monitoring|(% style="width:100px" %)X|(% style="width:84px" %)X

668

|=(% style="width: 144px;" %)(((

V-NET

remote screen

)))|(% style="width:100px" %)X|(% style="width:84px" %)X

673

|=(% style="width: 144px;" %) Cloud SCADA|(% style="width:100px" %)X|(% style="width:84px" %)X

674

675

(% class="box infomessage" %)

676

(((

677

Note: Only PI8000ig support IP camera,up to 4 camera at the same time.

678

)))

679

680

(% style="margin-left:auto; margin-right:auto; width:379px" %)

681

|=(% style="width: 147px;" %)EZVIZ camera（China server）|=(% style="width: 134px;" %)PI3000ig|=(% style="width: 95px;" %)PI8000ig

682

|=(% style="width: 147px;" %)HMI display|(% style="width:134px" %)X|(% style="width:95px" %)✔

683

|=(% style="width: 147px;" %)(((

V-NET

remote screen

)))|(% style="width:134px" %)✔|(% style="width:95px" %)✔

688

|=(% style="width: 147px;" %)Cloud SCADA|(% style="width:134px" %)(((

689

✔ only -C model

690

)))|(% style="width:95px" %)✔

691

|=(% style="width: 147px;" %)LAN monitoring|(% style="width:134px" %)✔|(% style="width:95px" %)✔

692

693

(% style="margin-left:auto; margin-right:auto; width:379px" %)

694

|=(% style="width: 147px;" %)EZVIZ camera（Other server）|=(% style="width: 135px;" %)PI3000ig|=(% style="width: 94px;" %)PI8000ig

695

|=(% style="width: 147px;" %)HMI display|(% style="width:135px" %)X|(% style="width:94px" %)✔

696

|=(% style="width: 147px;" %)(((

V-NET

remote screen

)))|(% style="width:135px" %)X|(% style="width:94px" %)X

701

|=(% style="width: 147px;" %)Cloud SCADA|(% style="width:135px" %)(((

702

✔ only -C model

703

)))|(% style="width:94px" %)✔

704

|=(% style="width: 147px;" %)LAN monitoring|(% style="width:135px" %)X|(% style="width:94px" %)X

705

706

(% class="box infomessage" %)

707

(((

708

Note: Currently, our HMI can only recognize EZVIZ accounts from china server. We will fix this problem in the future.

)))

= **IP camera** =

**Introduction**

1. An external IP Camera (web camera) can be used to display the screen captured by the it to achieve real-time monitoring of the scene of the equipment.

716

1. **ONVIF **protocol and **H.264** coding camera (RTSP web camera) are supported.

717

718

**Recommended Models:**

* Hikvision

** DS-2CD1321D-I

** DS-2CD3T20FD-I3W

** DS-2CD1221D-I3

** DS-2CV3Q21FD-IW

* Dahua

** DH-IPC-HFW1025D

** DH-IPC-HFW1235M-I1

728

729

**IP Camera Parameters Comparison for HMI Series**

730

731

|=(% style="width: 300px;" %)HMI Series|=(% style="width: 157px;" %)System Version|=(% style="width: 320px;" %)Support IP Camera or Not|=(% style="width: 645px;" %)Number of Cameras

732

|=(% style="width: 300px;" %)PI8000|(% style="width:157px" %)HMI V1.0/V2.0|(% style="width:320px" %)Yes|(% style="width:645px" %)1

733

|=(% style="width: 300px;" %)PI9000|(% style="width:157px" %)HMI V1.0/V2.0|(% style="width:320px" %)Yes|(% style="width:645px" %)4

734

|=(% style="width: 300px;" %)PI3000ig|(% style="width:157px" %)HMI V2.0|(% style="width:320px" %)No|(% style="width:645px" %)N/A

735

|=(% style="width: 300px;" %)PI8000ig|(% style="width:157px" %)HMI V2.0|(% style="width:320px" %)Yes|(% style="width:645px" %)4

✎Note:

~1. General 8000 series HMI can only view **1** IP camera streaming media play at the same time(Only **1** camera object can be placed per project).

741

742

2. General 9000 series HMI can only view **4** IP camera streaming media play at the same time(Only **4** camera objects can be placed per project).

743

744

3. PI8000ig series HMI can only view **4** IP camera streaming media play at the same time(Only **4** camera objects can be placed per project).

745

746

747

== **Camera search** ==

748

749

In the software PIStudio, Click "Project" -> "Project settings"-> "Extend", and check "Enable camera search module", shown as below.

750

751

(% style="text-align:center" %)

752

[[image:rtsp摄像头 1.png||class="img-thumbnail"]]

753

754

The maximum number of searches: Configure the number of online camera. The maximum number of searches does not exceed 20, and should be greater than that of online camera.

755

756

=== **Function address** ===

757

758

To configure the information of searches anf the records of search results. There are as follows.

759

760

(% class="table-bordered" %)

761

|(% style="width:226px" %)**Address**|(% style="width:533px" %)**Description**|(% style="width:240px" %)**Length**

762

|(% style="width:226px" %)HDW200|(% style="width:533px" %)Username|(% style="width:240px" %)20 words

763

|(% style="width:226px" %)HDW220|(% style="width:533px" %)Password|(% style="width:240px" %)20 words

764

|(% style="width:226px" %)HDX240.0|(% style="width:533px" %)Falling edge trigger search|(% style="width:240px" %)1 bit

765

|(% style="width:226px" %)HDX240.1|(% style="width:533px" %)(((

766

Search status

767

768

0: The search is complete.

769

770

1: It is searching.

771

)))|(% style="width:240px" %)1 bit

772

|(% colspan="2" rowspan="1" style="width:109px" %)The first search result|(% style="width:240px" %)80 words

773

|(% style="width:226px" %)HDW241|(% style="width:533px" %)IP address|(% style="width:240px" %)16 words

774

|(% style="width:226px" %)HDW257|(% style="width:533px" %)(((

775

~=1: correct password

776

777

~=0: wrong password

778

)))|(% style="width:240px" %)1 word

779

|(% style="width:226px" %)HDW258|(% style="width:533px" %)Device serial number|(% style="width:240px" %)43 words

780

|(% style="width:226px" %)HDW301|(% style="width:533px" %)Camera alias|(% style="width:240px" %)20 words

781

|(% colspan="2" rowspan="1" style="width:109px" %)The second search result|(% style="width:240px" %)80 words

782

|(% style="width:226px" %)HDW321|(% style="width:533px" %)IP address|(% style="width:240px" %)16 words

783

|(% style="width:226px" %)...|(% style="width:533px" %)...|(% style="width:240px" %)...

784

785

The username and password of function address need to entered manually. When searching for cameras, the username and password will be matched first, then each camera under the account will be retrieved, and the retrieved results will be stored in the response address. If the password is correct, the corresponding serial number would be displayed.

786

787

== **Camera display** ==

788

789

Add the object "camera display" to the project, click "Enable rtsp camera", as below.

790

791

(% style="text-align:center" %)

792

[[image:rtsp摄像头 2.png]]

793

794

795

Compile and download project, please click [Search Camera] button to get camera information in LAN The username and password here need to be entered manually. During searching camera, it will try to use this username and password to log in IP camera and store the result of login. If the password is correct, the “password correct” address will be displayed as 1 and the device serial number will be displayed. If the “password correct” address is 0, the device serial number would not be displayed.

796

797

=== **Function address** ===

798

799

(% class="table-bordered" %)

800

|=(% style="width: 204px;" %)**Address**|=(% colspan="2" style="width: 702px;" %)**Description**|=(% style="width: 245px;" %)**Length**

801

|(% style="width:204px" %)HAW100|(% colspan="2" style="width:702px" %)Username|(% style="width:245px" %)20 words

802

|(% style="width:204px" %)HAW120|(% colspan="2" style="width:702px" %)password|(% style="width:245px" %)20 words

803

|(% style="width:204px" %)HAW140|(% colspan="2" style="width:702px" %)Alias|(% style="width:245px" %)20 words

804

|(% style="width:204px" %)HAW160|(% colspan="2" style="width:702px" %)Device serial number|(% style="width:245px" %)43 words

805

|(% style="width:204px" %)HAW203|(% colspan="2" style="width:702px" %)Camera ID|(% style="width:245px" %)1 word

806

|(% colspan="1" rowspan="11" style="width:204px" %)HAW204|(% colspan="2" rowspan="1" style="width:702px" %)Camera Control|(% colspan="1" style="width:245px" %)1 word

807

|(% style="width:211px" %)HAX204.0|(% style="width:787px" %)Open camera|(% colspan="1" style="width:245px" %)1 word

808

|(% style="width:211px" %)HAX204.1|(% style="width:787px" %)Close camera|(% colspan="1" style="width:245px" %)1 word

809

|(% style="width:211px" %)HAX204.2|(% style="width:787px" %)Camera up|(% colspan="1" style="width:245px" %)1 word

810

|(% style="width:211px" %)HAX204.3|(% style="width:787px" %)Camera down|(% colspan="1" style="width:245px" %)1 word

811

|(% style="width:211px" %)HAX204.4|(% style="width:787px" %)Camera left|(% colspan="1" style="width:245px" %)1 word

812

|(% style="width:211px" %)HAX204.5|(% style="width:787px" %)Camera right|(% colspan="1" style="width:245px" %)1 word

813

|(% style="width:211px" %)HAX204.6|(% style="width:787px" %)screenshot|(% colspan="1" style="width:245px" %)1 word

814

|(% style="width:211px" %)HAX204.7|(% style="width:787px" %)Binding camera|(% colspan="1" style="width:245px" %)1 word

815

|(% style="width:211px" %)HAX204.8|(% style="width:787px" %)Set Alias|(% colspan="1" style="width:245px" %)1 word

816

|(% style="width:211px" %)HAX204.9|(% style="width:787px" %)Camera stop moving|(% colspan="1" style="width:245px" %)1 word

817

|(% style="width:204px" %)HAW205|(% colspan="2" style="width:702px" %)(((

818

Camera status

819

820

~=0: camera disconnected

821

822

~=1: camera connected

823

824

~=2: Camera is connecting

825

)))|(% style="width:245px" %)1 word

826

|(% style="width:204px" %)HAW206|(% colspan="2" style="width:702px" %)(((

827

Screenshot save location

828

829

~=0: Screenshot is saved into flash

830

831

~=1: Screenshot is saved into USB disk

832

833

~=2: Screenshot is saved into SD card

834

)))|(% style="width:245px" %)1 word

835

836

**Operating Procedures**

837

838

Fill the camera ID address with the camera serial number searched by the camera search module, and trigger the binding address to fill username and password.

839

840

* If the camera searching is disabled, then users need to manually enter the information of this camera, including username, password, and device serial number. Device serial number could be obtained by checking the label of camera.

841

842

(% style="text-align:center" %)

843

[[image:11.Advanced Function_html_9ba06415a43f4264.png||height="232" width="412" class="img-thumbnail"]]

844

845

* If the IP CAMERA was triggered successfully, we could see the monitor screen and we could also set a alias for the camera and control the movement of the camera(up, down, left and right, some IP camera could not support the movement) or the screenshot. These operations could not be performed if camera off.

846

847

(% style="text-align:center" %)

848

[[image:11.Advanced Function_html_5e0967606b906db1.jpg||height="250" width="333" class="img-thumbnail"]]

**✎Note:**

* Camera configuration. When you get the camera, you need to activate the camera and enable the onvif protocol for the camera according to the user manual and tools provided by the camera manufacturer. If the configuration is not correct, the camera cannot be used on the HMI.

854

* When reading camera information, you need to configure the user name and password for the camera. When multiple cameras are enabled, you are advised to set the user names and passwords of all cameras to be the same.

855

* When using the camera function, ensure that the camera and HMI are on the same LAN. When the HMI is directly connected to the camera through a network cable, set both HMI and camera to static IP addresses as follows.

856

857

(% class="table-bordered" %)

858

|=(% style="width: 166px;" %) |=(% style="width: 256px;" %)HMI|=(% style="width: 332px;" %)Camera

859

|(% style="width:166px" %)IP address|(% style="width:256px" %)192.168.1.1|(% style="width:332px" %)192.168.1.2

860

|(% style="width:166px" %)Gateway|(% style="width:256px" %)192.168.1.1|(% style="width:332px" %)192.168.1.1

861

862

* You could obtain the camera from the "Camera Search module" in "Project parameters" or manually fill in the address. You can obtain resources for the camera display object in the Camera Search module or manually enter the parameters.

863

* You are advised to configure and confirm the user name and password of the camera before using it. Do not use the wrong user name (password) to search for or link to the camera. Once the wrong user name (password) is exceeded for a certain number of times, the camera will be locked. During the lock period, the camera will reject any connection for at least half an hour generally.

864

* When monitoring HMI cameras, do not monitor the same camera at the same time. Otherwise, the monitoring screen may be lost.

865

* When the camera is disconnected due to network reasons, the system wouyld try to reconnect the camera every 20 seconds.

866

* The alias of the camera is saved in the user database. The alias in old project is retained when downloading new project, if [user database] is selected. Otherwise the it will be deleted.

867

868

(% style="text-align:center" %)

869

[[image:11.Advanced Function_html_804b6a35561fc436.png||height="367" width="600" class="img-thumbnail"]]

870

871

**Demo download link**

872

873

[[https:~~/~~/drive.google.com/open?id=10UR1cg8KDjcTvKJYgk1KR8z4YIApIsD8>>url:https://drive.google.com/open?id=10UR1cg8KDjcTvKJYgk1KR8z4YIApIsD8]]

874

875

== **Camera setting** ==

876

877

1.After getting a new camera, we must first follow the documentation and tools provided by the camera manufacturer to activate the camera and turn on the camera's onvif protocol, otherwise it cannot be used in our screen.

878

879

2.It is best to confirm the username and password before use. Do not keep searching or connecting to the camera with the wrong username and password. After a certain number of incorrect attempts, the camera will lock the device and refuse any connection during the lock period.

880

881

(% class="box infomessage" %)

882

(((

883

✎Note:The uesrname and password of ONVIF is different with the usename and password of camera login . Kindly check.

884

)))

885

886

3.Enable the open network video interface.

887

888

(% style="text-align:center" %)

889

[[image:1744681578260-253.png]]

890

891

4.The camera component of the HMI can only access the sub-stream of the camera. Due to system limitations, it is recommended that the sub-stream refer to the following configuration.

892

893

(% style="margin-left:auto; margin-right:auto; width:250px" %)

894

|=(% scope="row" %)**Video Type**|Video stream

895

|=**Frame rate**|8 ~~ 12

896

|=**Video Encoding**|H.264

897

|=**Image Quality**|Low

== FAQ ==

[[Why my HMI can not search the camera?>>https://docs.we-con.com.cn/bin/edit/PIStudio/FAQ/Why%20my%20HMI%20can%20not%20search%20the%20camera]]

902

903

[[When I finish search the camera,why i can only see the camera IP, and can not see the camera S/N code?>>https://docs.we-con.com.cn/bin/view/PIStudio/FAQ/When%20I%20finish%20search%20the%20camera%2Cwhy%20i%20can%20only%20see%20the%20camera%20IP%2C%20and%20can%20not%20see%20the%20camera%20SN%20code%3F]]

= **LAN Monitoring** =

908

909

WECON provides [HMI Monitor System] software for user to monitor PI3000 series HMI in Local area network (LAN).

910

911

This function is only for the model with -O. For example PI3070N-O.

912

913

== **[HMI Monitor System] software** ==

914

915

**Device List: **It displays HMIs, that connected into this monitor software;

916

917

**State Indicator:** It shows state of HMI, green means online, gray means offline;

918

919

**Operation Buttons: **It provides three operations for HMI device;

920

921

* Add: Click it to open add setting window;

922

* Delete: Click it to delete selected HMI device;

923

* Monitor: Click it to open monitor window for selected HMI device;

924

925

(% style="text-align:center" %)

926

[[image:11.Advanced Function_html_fdfb5186d5dd123d.png||height="302" width="600" class="img-thumbnail"]]

927

928

== **Operating procedures** ==

929

930

Click [Add] button to open setting window;

931

932

Enter HMI IP and Note;

933

934

Click [Connection test] button;

935

936

* If IP is correct, it will display tip as below;

937

938

(% style="text-align:center" %)

939

[[image:11.Advanced Function_html_130ed411da07f4c4.png||height="376" width="550" class="img-thumbnail"]]

940

941

* If IP is incorrect, it will display tip as below

942

943

(% style="text-align:center" %)

944

[[image:11.Advanced Function_html_878d04362f1b81b6.png||height="122" width="150" class="img-thumbnail"]]

945

946

**✎Note:** For using this function in PC, it requires the setup of LAN Monitoring Firewall, using Windows 7 system as example. **If this function works well in your PC, please ignore below content.**

947

948

**Solution 1: Disable Firmware Completely**

949

950

Open "Control Panel" and select "System Security".

951

952

(% style="text-align:center" %)

953

[[image:11.Advanced Function_html_9616a538bd5b8890.png||height="426" width="600" class="img-thumbnail"]]

954

955

Select "Windows Firewall"

956

957

(% style="text-align:center" %)

958

[[image:11.Advanced Function_html_4ff5d9c605179616.png||height="427" width="600" class="img-thumbnail"]]

959

960

Select "turn Windows Firewall on or off"

961

962

(% style="text-align:center" %)

963

[[image:11.Advanced Function_html_8cce81685e77dd93.png||height="532" width="850" class="img-thumbnail"]]

964

965

Select "Turn off Windows Firewall"

966

967

(% style="text-align:center" %)

968

[[image:11.Advanced Function_html_8e40bd24335bee5f.png||height="451" width="700" class="img-thumbnail"]]

969

970

**Solution 2: Do not close the firewall, but allow HMIUI to pass through the firewall**

971

972

Open Control Panel selection "system Security"

973

974

(% style="text-align:center" %)

975

[[image:11.Advanced Function_html_4a5370b15f8344bf.png||height="363" width="550" class="img-thumbnail"]]

976

977

Select "Windows Firewall"

978

979

(% style="text-align:center" %)

980

[[image:11.Advanced Function_html_3f00b4c76667d218.png||height="394" width="600" class="img-thumbnail"]]

981

982

Select "run a program or function through Windows Firewall"

983

984

(% style="text-align:center" %)

985

[[image:11.Advanced Function_html_2ce833853fe2fe08.png||height="422" width="600" class="img-thumbnail"]]

986

987

Select "Allow to run another program".

988

989

(% style="text-align:center" %)

990

[[image:11.Advanced Function_html_49e43fd3e9e58bc3.png||height="401" width="600" class="img-thumbnail"]]

991

992

Select "browse" in the pop-up dialog box.

993

994

(% style="text-align:center" %)

995

[[image:11.Advanced Function_html_714b05b4f66641fb.png||height="447" width="450"]]

996

997

Locate the HMIUI.exe file in the HMIUI directory under the installation path of the monitoring software, and double-click HMIUI.exe.

998

999

(% style="text-align:center" %)

1000

[[image:11.Advanced Function_html_cdf52e5522e2e568.png||height="596" width="600" class="img-thumbnail"]]

Select "add".

(% style="text-align:center" %)

1005

[[image:11.Advanced Function_html_2cf5b5f0c9aa4f7a.png||height="467" width="535" class="img-thumbnail"]]

1006

1007

Check the corresponding options.

1008

1009

(% style="text-align:center" %)

1010

[[image:11.Advanced Function_html_ffc611cca1a173f9.png||height="361" width="600" class="img-thumbnail"]]

select "OK".

(% style="text-align:center" %)

1015

[[image:11.Advanced Function_html_934ebd63c53af3ee.png||height="442" width="600" class="img-thumbnail"]]

1016

1017

= **Remote access config** =

**Introduction**

In the traditional concept, it is rather Difficult and complicated to remotely connect HMI via Ethernet. Users not only need to consider the security issue, but also need to set up complex network parameters. In addition, subject to the stage of the network environment, users have to do everything possible to think of ways through all levels of routers and switches. And an independent IP could only correspond to one HMI in tradition sense of the remote control. The WECON remote access system will solve all of those problems.

1022

1023

The solution of WECON HMI remote access is "Everything is possible with one network, one HMI, one cable". No matter where the HMI is, users could easily remote access HMI through the network, to achieve exclude exceptions and resolve them in the first time. In local area network or remote Internet, users could make HMI connect to Ethernet by one cable without setting any parameters. All network settings could be set by WECON remote access system.

1024

1025

**Set the IP of HMI**

1026

1027

(% style="text-align:center" %)

1028

[[image:远程访问 1.png||class="img-thumbnail"]]

1029

1030

**Use mobile phones, computers, tablets, etc., open a browser, enter the IP, you could access the project in the HMI screen.**

1031

1032

* You are advised to use Chrome or Firefox. If you want to use Internet Explorer, use Internet Explorer 9 or later.

1033

* 360, Sogou and other browsers need to use speed mode.

1034

* Support the iphone's own browser, or install a latest UC browser.

1035

* As long as the browser supports HTML5.

1036

1037

**Access through the cloud**

1038

1039

Access through the cloud platform, enter the machine code (the machine code of each HMI is independent) and model, then monitor the HMI remotely.

1040

1041

**Access through V-NET (ig series)**

1042

1043

Access through the V-NET, enter the machine code (the machine code of each HMI is independent) and the device password, bind the HMI, and monitor the HMI remotely.

1044

1045

**System Components**

1046

1047

WECON PI8000 and advanced HMI with [-R], such as PI8070-R;

1048

1049

WECON Smart APP or WECON Cloud platform

1050

1051

**User manual for WECON Smart and cloud platform download link**

1052

1053

[[https:~~/~~/drive.google.com/open?id=1hI8QI4vmJhAis2GFuCISChV9xGU0BxQ9>>url:https://drive.google.com/open?id=1hI8QI4vmJhAis2GFuCISChV9xGU0BxQ9]]

**FAQ**

* What is the difference between the-R model and the normal model?

1058

** The-R model can be accessed directly and unrestricted. Normal models need to buy cloudmonitoring products before access. The number of monitoring normal model is limitedaccording to the customer's purchase of cloud monitor packages.

1059

* How many customers could remote access HMI at the same time?

1060

** It supports max. 4 customers access HMI in the same time.

1061

1062

= **Mulit-link(For HMI V1.0)** =

1063

1064

== **Introduction** ==

1065

1066

The main principle of Multi-link is to use the method of Master&Slave to implement the One machine-Multiple screens by ethernet port. For example, one Master HMI connect to one Slave HMI, the Slave one can write or read value from PLC which is communicated with Master.

1067

1068

In Multi-link, there is only one Master, and all the other HMIs are Slaves. The Master HMI is the only one device communicate with PLC, and the data received from the PLC is transmitted to each slave through the host HMI(Master).

1069

1070

(% style="text-align:center" %)

1071

[[image:1652345241521-592.png||class="img-thumbnail"]]

1072

1073

At present, the Multi-link is regarded as special function. So not any model HMI support it. Need the HMI come with the special machine code. The series support Multi-link function right now: General, HMI+, i Series. Multi link doesn’t support the online simulaion. PI3000/PI3000+/PI3000i series can only have one Slave when using this function, while PI8000/9000,PI8000+/PI9000+ series can use at most 5 Slaves.

1074

1075

== **PIStudio settings** ==

1076

1077

Check to enable Multi-link, select the corresponding option. For example, if it is a slave HMI, select Slave.

1078

1079

(% style="text-align:center" %)

1080

[[image:多机互联.png||class="img-thumbnail"]]

1081

1082

1083

(% class="wikigeneratedid" %)

1084

Master IP address setting: Click "Project"→"Project settings"→"HMI IP", as below.

1085

1086

(% style="text-align:center" %)

1087

[[image:远程访问 1.png||height="516" width="594" class="img-thumbnail"]]

1088

1089

== **Slave project** ==

1090

1091

In order to let the fonts in the Slave and the Master consistent with each others, so Slave project needs to add one screen that can set the IP address of Master HMI for connecting to the Master, on the original the Master project. If Master project has components that use other font styles, and Slave project If there is no component corresponding to Master project, then the default font style SimSun would be displayed when the Multi-link is enabled. To avoid the Slave device prompts communication timeout message, you can add HSW9 = 1 in the initial script of Slave device.

== **Address** ==

|Address|Address Description|Usage Method

1096

|HSW1100|(% rowspan="4" %)The IP of Master HMI|IP address high endian 1

1097

|HSW1101|IP address high endian 2

1098

|HSW1102|IP address high endian 3

1099

|HSW1103|IP address high endian 4

1100

|HSW1104|(((

1101

Control the Slave to connect to

the Master or not

)))|(((

1: Connect to Master

0: Disconnect

)))

== **Notice** ==

During the connection, if the Master is downloading program, there is a highly chances that the slave screen is abnormal, and the Gallery and imported pictures cannot be displayed.

1113

1114

After the download process of Master HMI is finished, Slave needs to be restarted to monitor normally.

1115

1116

* If the Master and Slave are operated on any screen, the screen also will follow the changes and synchronize for other side.

1117

** Using HSW12 = 1 on the Master, which can not affect each other.

1118

* There is no momentary delay function for buttons.

1119

* Multi-link version bit switch has no Min. holding time.

1120

* PI3000 series can only have one Slave when using this function, while PI8000/9000 series can use this function at most 5 Slaves.

1121

* Only supports Multi-link connection in the LAN network (local area network), or direct connection between Master and Slave.

1122

* The Master and Slave projects must be consistent (mainly for keeping the font style used by the Master and Slave HMI consistent), and the Slave HMI always adds the configuration of the “Master IP address".

1123

* After the special address is enabled, Slave will remotely monitor the interfaces from Master, and the source project will not be executed.

1124

1125

✎Note: Slave project only needs to ensure that there is "the HSW address of the Master HMI IP" and the font style used by the Master.

1126

1127

= **Mulit-link(For HMI V9.0)** =

1128

1129

== **Introduction** ==

1130

1131

1. Multi-link function is through the master-slave mode of communication, using Ethernet cable connection to realize one machine with multiple screens, that is, one HMI connects another HMI through the Ethernet port, and reads or writes the data of the PLC connected by the master.

1132

1. In the multi-link operation, one HMI is the master (Master), and the other is the slave (Slave). Master HMI is the only one that communicates with the PLC, and the data receiving from the PLC is transmitted to each slave through the master (Master).

1133

1134

== **Supported Series** ==

ig series

== **Step of connecting slave to master** ==

1139

1140

Go backstage,and Click[Cloud]

1141

1142

(% style="text-align:center" %)

[[image:图片1.png]]

Click multi-link to enter the interface,Click Slave or Master (Select Slave to use the device as slave, select Master to use the device as master).And Find the device list, the master device that you need to connect to, and click the master device corresponding to IP.

1147

1148

(% style="text-align:center" %)

1149

[[image:图片2.png]]

1150

1151

After clicking the master device of the corresponding IP, the IP of the master device is automatically filled in to the checkbox below, and click [Connection] to connect to the master as a slave.

1152

1153

(% style="text-align:center" %)

1154

[[image:图片3.png]]

1155

1156

After the connection is successful and the device restarts, it enters the display interface to the master, indicating that the connection is successful.

1157

1158

== **Use and Instructions of Button Functions** ==

1159

1160

From the machine device to the multi-machine interconnection configuration interface, the Master button is not clickable, and the IP list of the master device that can be connected is displayed.

1161

1162

(% style="text-align:center" %)

1163

[[image:图片4.png]]

1164

1165

Master device Enter the multi-machine interconnection interface, click the master button, you can see the IP list of the connected slave devices.

1166

1167

(% style="text-align:center" %)

1168

[[image:图片5.png]]

1169

1170

Slave equipment Click the exit button of the multi-machine interconnection interface to exit the connection status.Device restarts, slave exits.

1171

1172

(% style="text-align:center" %)

1173

[[image:图片6.png]]

1174

1175

Master multi-machine interconnection interface. Click the right-arrow to view the information of the corresponding device of the slave.

1176

1177

(% style="text-align:center" %)

[[image:图片7.png]]

Device information

(% style="text-align:center" %)

1183

[[image:图片8.png]]

1184

1185

Set multi-computer interconnection master password, enter the password, click Settings to set the password. A password is required for the slave to reconnect to this master. Cancel the password, clear the password box directly, and click Settings.

Master device

(% style="text-align:center" %)

[[image:图片9.png]]

Slave device

(% style="text-align:center" %)

1195

[[image:图片10.png]]

1196

1197

Click the refresh button on the master or slave interface to refresh the new access device, or find the master device.

Slave device

(% style="text-align:center" %)

[[image:图片11.png]]

Master device

(% style="text-align:center" %)

1207

[[image:图片13.png]]

1208

1209

(% class="box infomessage" %)

(((

✎Note:

* Need same LAN environment(Can connect via WIFI)

1214

* Need same HMI resolution.

1215

* Need same HMI version.

1216

)))

1217

1218

== Grouping function ==

1219

1220

The grouping function is to group according to different screens: the same group currently displays the same screen (synchronous), different groups currently display different screens (asynchronous), and different groups can be configured with different initial screen numbers.

1221

1222

If the slave is not configured with any group, then the screen of this slave is synchronized with the master (the master switches the screen, and the slave also switches the screen). If the group is configured separately, the screen of the slave is asynchronous (the master switches the screen, bue the slave does not switch the screen).

For example:

Group 1: scr1, you can configure the initial screen number 1

1227

1228

Group 2: scr2, you can configure the initial screen number 2

1229

1230

If a slave in scr1 (192.168.65.10) switches the screen, all slaves in the group will jump to the current screen (192.168.65.10). The screens of scr2 and the master remain unchanged. Similarly, the effect of switching the screen of a slave in scr2 is the same as that of scr1.

1231

1232

For slaves that are not configured with a group, the screen follows the master.

1233

1234

1235

~1. The slave connects to the master

1236

1237

2. On the master interface, click “Group”

1238

1239

(% style="text-align:center" %)

1240

[[image:图片14.png]]

1241

1242

(% style="text-align:center" %)

1243

[[image:图片15.png]]

1244

1245

3. Enter the group name.

1246

1247

(% style="text-align:center" %)

1248

[[image:图片16.png]]

1249

1250

4. Enter the scree number. (The screen number you set is the screen number that is initially displayed when the slave is powered on.)

1251

1252

(% style="text-align:center" %)

1253

[[image:图片17.png]]

1254

1255

5. Add new group successfully

1256

1257

(% style="text-align:center" %)

1258

[[image:图片18.png]]

1259

1260

6. Add the slave to the corresponding group

1261

1262

(% style="text-align:center" %)

[[image:图片19.png]]

7. Add successfully

(% style="text-align:center" %)

1268

[[image:图片20.png]]

1269

1270

(% class="box infomessage" %)

(((

✎Note：

* The slave must be connected to the master before it can be grouped with the master

1275

* The configured screen number must be the screen number already in the master

1276

1277

[[image:1739842577801-523.png]]

1278

1279

* After the screen number is configured, the slaves in the same group will have synchronized screens. After the slave is restarted, the initial screen will also be the screen number set by the group.

1280

* Screens in different groups are asynchronous.

1281

)))

1282

1283

= **V-NET Access (PC Side)** =

1284

1285

== **Login interface** ==

1286

1287

Enter the platform, as shown in Figure 1:

1288

1289

New users need to register first.

1290

1291

* The successfully registered account is the administrator account, which can bind the device and other operations.

1292

* The user needs to remember the registered account and password, and able to log in simultaneously on the PC Client/APP.

1293

* If the user forgets the password, he can click "Forgot Password" to reconfigure the password.

1294

1295

(% style="text-align:center" %)

1296

[[image:11.2-1.png||class="img-thumbnail"]]

Figure 1

Enter the account and password, and then click the "Login" button.

1301

1302

After successfully logging in, enter the "V-NET" interface, as shown in Figure 2. Add the HMI information you want to access through the "+" in the lower left corner.

1303

1304

(% style="text-align:center" %)

1305

[[image:11.Advanced Function_html_7618c4f92465545c.png||height="670" width="1366" class="img-thumbnail"]]

Figure 2

After the Add Device window pops up, enter the machine code and password of the device to add the device, as shown in Figure 3:

1310

1311

(% style="text-align:center" %)

1312

[[image:11.Advanced Function_html_9b4cc907cf4a8c13.png||height="502" width="601" class="img-thumbnail"]]

Figure 3

* **Device machine code:** Each HMI has a unique and independent machine code, which is used to identify every remote device. (When binding multiple devices at the same time, the device passwords must be the same. Only one machine code can be entered on one line. When entering multiple machine codes, use the "Enter" key to change the line. If the format is wrong, the binding operation will fail and error will occur). Method of obtain machine code:

1317

** PIStudio → "Project" → "Tool"→ "Download" →Copy the machine code.

1318

** Long press the upper right corner of HMI to enter the backstage, you can see "Machine Id" in "Machine Info".

1319

** Obtain the machine code from the backlabel of the device.

1320

* **Device password**: Refers to the Cloud access password, the default is 6 digits 8 (888888). Please refer to the cloud configuration if you first time binding the device.

1321

** The length is 6 digits, English and special characters in English are allowed, spaces are not allowed, and cannot be empty.

1322

* **Device alias:** Refers to the name recognition of device in the menu bar of V-NET.

1323

** Maximum 12 digits, except ·_-+=}]",.?,;: ""”【】—()...! these Special characters allowed others are limited to input, no spaces or blanks are allowed.

1324

** If the device is successfully bound, click OK, and it would prompt message: The device is bound successfully!

1325

1326

(% class="box infomessage" %)

1327

(((

1328

**✎Note: **If you bind multiple machine codes in batch, the device alias will use the input device alias as the prefix, and the system will automatically add a suffix. Example: Default group (device alias)_1 (automatically added suffix).

1329

)))

1330

1331

== **V-NET module** ==

1332

1333

**Remote Monitoring**

1334

1335

The remote monitoring module can display the project page of the current screen in real time, and can operate the project on the web page, and the control of the screen. As shown in Figure 4:

1336

1337

(% style="text-align:center" %)

1338

[[image:11.2-4.png||class="img-thumbnail"]]

Figure 4

**Data Viewing**

The data viewing module is divided into Communication port, Collection point, Alarm configuration, Alarm records, Data Record configuration , Data Record, etc. As shown in Figure 5:

1345

1346

(% style="text-align:center" %)

1347

[[image:11.2-5.png||class="img-thumbnail"]]

Figure 5

The parameter configuration is as follows:

1352

1353

* Communication port : The communication port information, includes connection method and protocol name, can only be viewed, and cannot be added or modified. This info comes from the settings from HMI.

1354

* Collect point:Data monitoring module of the device. The collection point is the monitoring data, and its read-write, write-only, and read-only permissions also come from the Tags settings from HMI.

1355

* Note: You cannot add or delete collection points here. The read & write permissions of the collection points in the HMI will directly restrict the modification of the read & write permissions of the collection points by V-NET.

1356

* Alarm configuration: Alarm records of the device, monitoring points cannot be added, confirming the Alarm record and exporting data can be performed.

1357

* Data Record configuration: Data Record is historical data of the device, monitoring points cannot be added, curve and list viewing method are supported, and data records can be exported.

**Remote Download**

This function allows application on the PC to download directly to PLC or HMI, as shown in Figure 6:

1362

1363

(% style="text-align:center" %)

1364

[[image:11.2-6.png||class="img-thumbnail"]]

Figure 6

(% class="box infomessage" %)

1369

(((

1370

**✎Note: **The pass through function of remote download is temporarily unavailable on the web page, and it can be used normally in PC client. The configuration is as follows:

1371

)))

1372

1373

PLC download (only for Pass-through)

1374

1375

* Click the setting (gear icon) in the upper right corner of PC Client, and a dialog will pop up. The red area is the COM port configuration when the PLC pass-through downloads. As shown in Figure 7:

1376

1377

(% style="text-align:center" %)

1378

[[image:11.Advanced Function_html_870ebc5415b1a534.png||height="565" width="526" class="img-thumbnail"]]

Figure 7

* After configuring the COM port, go to the remote downloaded, PLC download, to config the name, communication port, virtual serial port and other configurations as shown in Figure 6.

1383

1384

HMI Download (only for Pass-through)

1385

1386

* Click the setting (gear icon) button in the upper right corner of PC Client, and a dialog will pop up. The red area is the configuration of the HMI download tool. As shown in Figure 8:

1387

1388

(% style="text-align:center" %)

1389

[[image:11.Advanced Function_html_64e406f9862f887e.png||height="565" width="526" class="img-thumbnail"]]

Figure 8

* Click the setting (gear icon) button, a dialog box will pop up, and automatically detect and find the PIStudio that has been installed in PC and conforms to the version, as shown in Figure 9:

1394

** Location: Display the installation path of the current PIStudio.

1395

** Version: Corresponding to the version of the current PIStudio.

1396

** Browse: Click to manually set the installation path of PIStudio.

1397

1398

[[image:11.Advanced Function_html_df9946a5a7574454.png||height="349" width="642"]]

Figure 9

**Basic**

In the "Basic" sub-page of Basic, HMI name, record reserved selection, password, location and remarks, etc. As shown in Figure 10:

1405

1406

[[image:11.Advanced Function_html_c76828978cb6b697.png||height="670" width="1366"]] Figure 10

1407

1408

The device name is an alias of HMI, which is mainly used for easy distinction.

1409

1410

Online status: You can click the refresh button to refresh the online status of the HMI.

1411

1412

Machine code: Each HMI has a unique and independent machine code.

1413

1414

Record reserved: Checking the corresponding options will let HMI to suspend updating the corresponding configuration after downloading a new project.

1415

1416

Password: Refers to the cloud access password, the default is 6 digits 8 (888888); the cloud access password can be set and modified, the specific location is:

1417

1418

* V-NET → specified HMI → Baisc → "password” → modify and save, as shown in Figure 10.

1419

* "Project" → "Cloud" → "Basic" → "Password" → of PIStudio (only unbind HMI can be modified), see Cloud Configuration.

1420

1421

Maximum storage of Alarm data: The maximum number of alarm data saved, with a range of 1 to 50000.

Positioning:

* Use the device base station positioning to locate.

1426

* Use manual positioning.

1427

1428

(% class="box infomessage" %)

1429

(((

1430

**✎Note:** After modifying the basic information of the device, you need to click Save below to save the modification successfully. If it is not saved successfully, please click Force Synchronization.

1431

)))

1432

1433

== **RE Series Instructions** ==

1434

1435

The RE series could easily meet advanced requirements such as real-time dashboard in industrial site.

**Operation Steps**

(1) New project

1) Click [New Project];

2) Name the project;

3) Select [HMI Series] as [RE Series];

1446

1447

4) Select [HMI Model] as [V-BOX RE-00/V-BOX RE-4G] (according to the actual needs);

1448

1449

5) Optional Step: Select the resolution. (Due to the RE V-Box doesn't have the actual display, so it can select various resolutions)

1450

1451

6) Optional Step: Same to the ig series, user could select the [[Screen style>>doc:PIStudio.04\.Software Menu.WebHome||anchor="HScreenstyle28Onlyigseries29"]] for RE series products;

1452

1453

7) Click [OK] to finish the creation;

1454

1455

(% style="text-align:center" %)

1456

[[image:10-1remake.png]]

1457

1458

8) Establish the communication protocol setup;

1459

1460

(% style="text-align:center" %)

[[image:10-2.png]]

(2) Enable Cloud

Enable the Cloud function to let the RE V-Box able to access the V-NET platform.

1) Click [Cloud];

2) Click [Enable];

3) Select the corresponding server;

1472

1473

4) Click [OK] to finish the settings;

1474

1475

(% style="text-align:center" %)

[[image:10-3.png]]

(3) Project Download

After project is done, user can compile and download the project into device. Same to the HMI, there are two download methods available for RE series, one is micro USB cable and the other one is the Ethernet.

1) Click [Compile];

2) Click [Download] to pop up the download tool;

1485

1486

3) Select the download port;

1487

1488

4) Click [PC to HMI];

1489

1490

5) Click OK to reboot the device;

1491

1492

(% style="text-align:center" %)

[[image:10-4.png]]

✎Note: About the tool options' details, please go ahead: [[Download Tool>>||anchor="HDownloadTool"]]

1497

1498

1499

(4) V-NET Platform Bind and browse

1500

1501

About this part, please back to the heading [[V-NET Access>>doc:||anchor="HV-NETAccess28PCSide29"]] on the beginning or check the corresponding video: [[The ig V-NET Access>>https://youtu.be/j6i6KsCmnTE?list=PL_Bpnb2RgaktphrxRaCpFA809H_0xs-cU]](The general steps are same).

1) Remote monitoring

The remote monitoring module can display the project screen of the current HMI in real time and can operate the project on the web page.

1506

1507

(% style="text-align:center" %)

[[image:10-5.png]]

2) Data view

It is divided into Communication port, Collection point, Alarm configuration, Alarm Recird, Data Record configuration, Data Record etc.

1513

1514

About this part, please go to the [[Data Tool>>doc:PIStudio.08\.Basic Function.WebHome]] to check the details, or check the corresponding video: [[The ig Upload to Cloud Configuration>>https://youtu.be/vWXSF3qCwiQ]]

1515

1516

(% style="text-align:center" %)

[[image:10-6.png]]

3) Pass-through

The pass-through function allows application files on the PC to maintenance the project program on site through RE devices.

1522

1523

About this part, please go to the [[Device Pass-through>>doc:V-BOX.V-Net.Manual.3 V-NET Client.WebHome||anchor="HDevicePass-through"]] chapter to check the details,

✎Note:

* The pass-through function is unavailable on the browser web page, user need to change to V-NET Client to process the procedures;

1528

* When the device is offline, button [Start Pass-through] cannot be clicked;

1529

* When the device firmware is too low, button [Start Pass-through] cannot be clicked;

1530

* Current user doesn't have permission for pass-through device or the device is shared by others, button [Start Pass-through] cannot be clicked;

1531

* When the current user already has one device that is being penetrated, button [Start Pass-through] button cannot be clicked;

4) LAN Monitoring

Open the browser and enter the IP of the RE V-Box. Just like the following screenshot:

1536

1537

(% style="text-align:center" %)

1538

[[image:10-7.png]]

Wiki source code of 10 Advanced Function

Navigation

Table of Contents