Skip to Content

Changes for page 10 Advanced Function

Last modified by Jett on 2025/04/15 09:59
From version 57.1
edited by Jett
on 2025/02/17 14:51
Change comment: There is no comment for this version
To version 59.1
edited by Jett
on 2025/04/15 09:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -872,6 +872,35 @@
872 872  
873 873  [[https:~~/~~/drive.google.com/open?id=10UR1cg8KDjcTvKJYgk1KR8z4YIApIsD8>>url:https://drive.google.com/open?id=10UR1cg8KDjcTvKJYgk1KR8z4YIApIsD8]]
874 874  
875 +== **Camera setting** ==
876 +
877 +1.After getting a new camera, we must first follow the documentation and tools provided by the camera manufacturer to activate the camera and turn on the camera's onvif protocol, otherwise it cannot be used in our screen.
878 +
879 +2.It is best to confirm the username and password before use. Do not keep searching or connecting to the camera with the wrong username and password. After a certain number of incorrect attempts, the camera will lock the device and refuse any connection during the lock period.
880 +
881 +(% class="box infomessage" %)
882 +(((
883 +✎Note:The uesrname and password of ONVIF is different with the usename and password of camera login . Kindly check.
884 +)))
885 +
886 +3.Enable the open network video interface.
887 +
888 +(% style="text-align:center" %)
889 +[[image:1744602209420-365.png]]
890 +
891 +4.The camera component of the HMI can only access the sub-stream of the camera. Due to system limitations, it is recommended that the sub-stream refer to the following configuration.
892 +
893 +(% style="margin-left:auto; margin-right:auto; width:250px" %)
894 +|=(% scope="row" %)**Video Type**|Video stream
895 +|=**Frame rate**|8 ~~ 12
896 +|=**Video Encoding**|H.264
897 +|=**Image Quality**|Low
898 +
899 +== FAQ ==
900 +
901 +
902 +
903 +
875 875  = **LAN Monitoring** =
876 876  
877 877  WECON provides [HMI Monitor System] software for user to monitor PI3000 series HMI in Local area network (LAN).
... ... @@ -1183,10 +1183,71 @@
1183 1183  * Need same HMI version.
1184 1184  )))
1185 1185  
1186 -== ==
1215 +== Grouping function ==
1187 1187  
1188 -
1217 +The grouping function is to group according to different screens: the same group currently displays the same screen (synchronous), different groups currently display different screens (asynchronous), and different groups can be configured with different initial screen numbers.
1189 1189  
1219 +If the slave is not configured with any group, then the screen of this slave is synchronized with the master (the master switches the screen, and the slave also switches the screen). If the group is configured separately, the screen of the slave is asynchronous (the master switches the screen, bue the slave does not switch the screen).
1220 +
1221 +For example:
1222 +
1223 +Group 1: scr1, you can configure the initial screen number 1
1224 +
1225 +Group 2: scr2, you can configure the initial screen number 2
1226 +
1227 +If a slave in scr1 (192.168.65.10) switches the screen, all slaves in the group will jump to the current screen (192.168.65.10). The screens of scr2 and the master remain unchanged. Similarly, the effect of switching the screen of a slave in scr2 is the same as that of scr1.
1228 +
1229 +For slaves that are not configured with a group, the screen follows the master.
1230 +
1231 +
1232 +~1. The slave connects to the master
1233 +
1234 +2. On the master interface, click “Group”
1235 +
1236 +(% style="text-align:center" %)
1237 +[[image:图片14.png]]
1238 +
1239 +(% style="text-align:center" %)
1240 +[[image:图片15.png]]
1241 +
1242 +3. Enter the group name.
1243 +
1244 +(% style="text-align:center" %)
1245 +[[image:图片16.png]]
1246 +
1247 +4. Enter the scree number. (The screen number you set is the screen number that is initially displayed when the slave is powered on.)
1248 +
1249 +(% style="text-align:center" %)
1250 +[[image:图片17.png]]
1251 +
1252 +5. Add new group successfully
1253 +
1254 +(% style="text-align:center" %)
1255 +[[image:图片18.png]]
1256 +
1257 +6. Add the slave to the corresponding group
1258 +
1259 +(% style="text-align:center" %)
1260 +[[image:图片19.png]]
1261 +
1262 +7. Add successfully
1263 +
1264 +(% style="text-align:center" %)
1265 +[[image:图片20.png]]
1266 +
1267 +(% class="box infomessage" %)
1268 +(((
1269 + ✎Note：
1270 +
1271 +* The slave must be connected to the master before it can be grouped with the master
1272 +* The configured screen number must be the screen number already in the master
1273 +
1274 +[[image:1739842577801-523.png]]
1275 +
1276 +* After the screen number is configured, the slaves in the same group will have synchronized screens. After the slave is restarted, the initial screen will also be the screen number set by the group.
1277 +* Screens in different groups are asynchronous.
1278 +)))
1279 +
1190 1190  = **V-NET Access (PC Side)** =
1191 1191  
1192 1192  == **Login interface** ==
1739842577801-523.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +5.2 KB
Content
图片14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +100.8 KB
Content
图片15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +87.2 KB
Content
图片16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +91.5 KB
Content
图片17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +90.1 KB
Content
图片18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +89.5 KB
Content
图片19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +90.0 KB
Content
图片20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.2454238480
Size
... ... @@ -1,0 +1,1 @@
1 +93.9 KB
Content