Changes for page 12 PLC Protocol OLD

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 9 removed)
  • image-20220830094600-1.png
  • image-20220830094657-2.png
  • image-20220830094929-1.png
  • image-20220830095131-1.png
  • image-20220830140537-1.png
  • image-20220830140629-2.png
  • image-20220830141138-1.png
  • image-20220830143348-1.png
  • image-20220830143511-2.png

Details

Page properties

Content

...	...	@@ -511,7 +511,7 @@
511	511	(% style="text-align:center" %)
512	512	[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
513	513
514		-== **CompactLogix FreeTag Ethernet protocol** ==
	514	+== **FreeTag Ethernet/IP (CompactLogix)** ==
515	515
516	516	Allen-Brandly CompactLogix
517	517
...	...	@@ -568,7 +568,7 @@
568	568	(% style="text-align:center" %)
569	569	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
570	570
571		-== **MicroLogix 1200** ** protocol** ==
	571	+== **AB PLC address edit** ==
572	572
573	573	The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
574	574
...	...	@@ -1584,13 +1584,16 @@
1584	1584	[[image:image-20220829152102-5.png]]
1585	1585
1586	1586
	1587	+(% class="wikigeneratedid" %)
1587	1587	== **DVP Ethernet Protocol** ==
1588	1588
	1590	+
1589	1589	(% class="wikigeneratedid" %)
1590	1590	Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
1591	1591
1592	1592	**1）HMI Settings**
1593	1593
	1596	+
1594	1594	|**Items**|**Settings**|**Note**
1595	1595	|Protocol|DELTA DVP Modbus TCP|
1596	1596	|Connection|Ethernet|
...	...	@@ -1627,193 +1627,226 @@
1627	1627
1628	1628	[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1629	1629
1630		-== **AS serial protocol** ==
	1633	+= **MODBUS** =
1631	1631
1632		-**1）HMI Settings**
	1635	+== **MODBUS RTU Master** ==
1633	1633
1634		-|**Item**|**Settings**|**Note**
1635		-|Protocol|DELTA AS300 MODBUS RTU|
1636		-|Connection|RS485|
1637		-|Baud rate|9600|
	1637	+Supported Series: MODBUS RTU CONTROLLER
	1638	+
	1639	+HMI works as MODBUS SLAVE connecting with MASTER
	1640	+
	1641	+(% style="text-align:center" %)
	1642	+[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1643	+
	1644	+
	1645	+(% style="text-align:center" %)
	1646	+[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1647	+
	1648	+
	1649	+(% style="text-align:center" %)
	1650	+[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1651	+
	1652	+**HMI Settings**
	1653	+
	1654	+(% class="table-bordered" %)
	1655	+|**Items**|**Settings**|**Note**
	1656	+|Protocol|MODBUS RTU Master|
	1657	+|Connection|RS485/RS232|
	1658	+|Baud rate|2400~~187500|
1638	1638	|Data bit|8|
1639		-|Parity|NONE|
1640		-|Stop bit|1|
1641		-|PLC station No.|1|
	1660	+|Parity|Even/ Odd/ None|
	1661	+|Stop bit|1/2|
	1662	+|Station No.|0~~255|
1642	1642
1643		-**2）Address List**
	1664	+**Address List**
1644	1644
	1666	+(% class="table-bordered" %)
	1667	+|**Type**|**HMI address**|**MODBUS code**|**Range**
	1668	+|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
	1669	+|Word|HDW3500~~HDW7999|4|0~~4499
1645	1645
1646		-|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1647		-|Bit|X|X|X d|0~~63|
1648		-|Bit|Y|Y|Y d|0~~63|
1649		-|Bit|D|D|D d|0~~29999|
1650		-|Bit|M|M|M d|0~~8191|
1651		-|Bit|SM|SM|SM d|0~~4095|
1652		-|Bit|S|S|S h|0~~2047|
1653		-|Bit|T|T|T d|0~~511|
1654		-|Bit|C|C|C d|0~~511|
1655		-|Bit|HC|HC|HC d|0~~255|
1656		-|Word|X|X|X h|0~~63|
1657		-|Word|Y|Y|Y d|0~~63|
1658		-|Word|SR|SR|SR d|0~~2047|
1659		-|Word|D|D|D d|0~~29999|
1660		-|Word|T|T|T d|0~~511|
1661		-|Word|C|C|C h|0~~511|
1662		-|Word|E|E|E d|0~~9|
	1671	+**Cable Wiring**
1663	1663
1664		-**3）Configure the communication protocol**
	1673	+* **RS485**
1665	1665
1666		-[[image:image-20220830094600-1.png]]
	1675	+(% style="text-align:center" %)
	1676	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1667	1667
1668		-[[image:image-20220830094657-2.png]]
	1678	+(% style="text-align:center" %)
	1679	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1669	1669
1670		-**4）Cable Wiring**
	1681	+* **RS232**
1671	1671
1672		-Figure
	1683	+(% style="text-align:center" %)
	1684	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
1673	1673
1674		-[[image:image-20220830141138-1.png]]
	1686	+**✎Note:** COM3 only available in PI8000/PI9000 series.
1675	1675
1676		-Pin Definition Diagram
	1688	+== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
1677	1677
1678		-[[image:image-20220830095131-1.png]]
	1690	+Supported Series: MODBUS RTU CONTROLLER
1679	1679
1680		-== **AS Ethernet Protocol** ==
	1692	+HMI works as MODBUS MASTER connecting with SLAVE.
1681	1681
1682		-**1）HMI Settings**
	1694	+The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
1683	1683
	1696	+(% style="text-align:center" %)
	1697	+[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1684	1684
1685		-|=**Items**|=**Settings**|=**Note**
1686		-|Protocol|DELTA AS300 MODBUS TCP|
1687		-|Connection|Ethernet|
1688		-|Port No.|502|
1689		-|Device No.|1|
1690		-|HMI No.|0|
1691	1691
1692		-**2）Address List**
	1700	+(% style="text-align:center" %)
	1701	+[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1693	1693
1694	1694
1695		-|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1696		-|Bit|X|X|X d|0~~63|
1697		-|Bit|Y|Y|Y d|0~~63|
1698		-|Bit|D|D|D d|0~~29999|
1699		-|Bit|M|M|M d|0~~8191|
1700		-|Bit|SM|SM|SM d|0~~4095|
1701		-|Bit|S|S|S h|0~~2047|
1702		-|Bit|T|T|T d|0~~511|
1703		-|Bit|C|C|C d|0~~511|
1704		-|Bit|HC|HC|HC d|0~~255|
1705		-|Word|X|X|X h|0~~63|
1706		-|Word|Y|Y|Y d|0~~63|
1707		-|Word|SR|SR|SR d|0~~2047|
1708		-|Word|D|D|D d|0~~29999|
1709		-|Word|T|T|T d|0~~511|
1710		-|Word|C|C|C h|0~~511|
1711		-|Word|E|E|E d|0~~9|
	1704	+(% style="text-align:center" %)
	1705	+[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1712	1712
1713		-**3）Configure the communication protocol**
	1707	+**HMI Settings**
1714	1714
1715		-[[image:image-20220830140537-1.png]]
	1709	+(% class="table-bordered" %)
	1710	+|**Items**|**Settings**|**Note**
	1711	+|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
	1712	+|Connection|RS485/RS232|
	1713	+|Baud rate|2400~~187500|
	1714	+|Data bit|8|
	1715	+|Parity|Even/ Odd/ None|
	1716	+|Stop bit|1/2|
	1717	+|PLC station No.|0~~255|
1716	1716
1717		-[[image:image-20220830140629-2.png]]
	1719	+**Address List**
1718	1718
1719		-**4）Cable Wiring**
	1721	+(% class="table-bordered" %)
	1722	+|**Type**|**Address Type**|**Function code & Description**
	1723	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	1724	+|06 (write single register: write a binary value to a holding register)
	1725	+|10 (write values to multiple addresses )
	1726	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	1727	+|06 (write single register: write a binary value to a holding register)
	1728	+|10 (write values to multiple addresses )
	1729	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	1730	+|06 (write single register: write a binary value to a holding register)
	1731	+|10 (write values to multiple addresses )
	1732	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	1733	+|10 (write values to multiple addresses )
	1734	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	1735	+|05 (Force a single coil to force the on/off state of a logic coil)
	1736	+|0F (Write multiple bits, ie write continuously)
	1737	+|(% rowspan="3" %)1|02 (Read the input state)
	1738	+|05 (Force a single coil to force the on/off state of a logic coil)
	1739	+|0F (Write multiple bits)
	1740	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	1741	+|05 (Force a single coil to force the on/off state of a logic coil)
	1742	+|0F (Write multiple bits)
	1743	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	1744	+|0F (Write multiple bits)
1720	1720
1721		-Figure
	1746	+**✎Note:**
1722	1722
1723		-[[image:image-20220830094929-1.png]]
	1748	+* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
	1749	+* The function codes sent out are the same as those that read and write words.
1724	1724
1725		-Pin Definition Diagram
	1751	+**Station number for more than one slaves**
1726	1726
1727		-[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1753	+If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
1728	1728
1729		-= Create communication with **Omron** PLC =
	1755	+(% style="text-align:center" %)
	1756	+[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
1730	1730
1731		-== **CJ TCP FINS Ethemet  Protocol** ==
	1758	+**Cable Wiring**
1732	1732
1733		-Supported device:CJ series
	1760	+* **RS485**
1734	1734
1735		-**1）HMI Settings**
	1762	+(% style="text-align:center" %)
	1763	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1736	1736
1737		-|=**Items**|=**Settings**|=**Note**
1738		-|Protocol|OMRON CJ TCP FINS Ethemet|
	1765	+(% style="text-align:center" %)
	1766	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1767	+
	1768	+* **RS232**
	1769	+
	1770	+(% style="text-align:center" %)
	1771	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	1772	+
	1773	+**✎Note:** COM3 only available in PI8000/PI9000 series.
	1774	+
	1775	+== **MODBUS TCP Slave (All function)** ==
	1776	+
	1777	+Supported series: MODBUS TCP controller
	1778	+
	1779	+HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
	1780	+
	1781	+(% style="text-align:center" %)
	1782	+[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1783	+
	1784	+(% style="text-align:center" %)
	1785	+[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
	1786	+
	1787	+
	1788	+(% style="text-align:center" %)
	1789	+[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
	1790	+
	1791	+**HMI Setting**
	1792	+
	1793	+(% class="table-bordered" %)
	1794	+|**Items**|**Settings**|**Note**
	1795	+|Protocol|MODBUS TCP Slave (All function)|
1739	1739	|Connection|Ethernet|
1740		-|Port No.|9600|
1741		-|Device No.|0|
1742		-|HMI No.|0|(((
1743		-
1744		-)))
	1797	+|Port No.|502|
	1798	+|PLC station No.|1|
1745	1745
1746		-**2）Address List**
	1800	+**Address List**
1747	1747
1748		-|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1749		-|Bit|CIO|CIO|CIO d|0~~99999|
1750		-|Bit|W|W|W d|0~~99999|
1751		-|Bit|D|D|D d|0~~99999|
1752		-|Bit|H|H|H d|0~~99999|
1753		-|Bit|A|A|A d|0~~99999|
1754		-|Bit|T|T|T h|0~~99999|
1755		-|Bit|CF|CF|CF d|0~~99999|
1756		-|Bit|FF|FF|FF d|0~~99999|
1757		-|Bit|C|C|C d|0~~99999|
1758		-|Bit|EM0|EM0|EM0 d|0~~99999|
1759		-|Bit|EM1|EM1|EM1 d|0~~99999|
1760		-|Bit|EM2|EM2|EM2 d|0~~99999|
1761		-|Bit|EM3|EM3|EM3 d|0~~99999|
1762		-|Bit|EM4|EM4|EM4 d|0~~99999|
1763		-|Bit|EM5|EM5|EM5 h|0~~99999|
1764		-|Bit|EM6|EM6|EM6 d|0~~99999|
1765		-|Bit|EM7|EM7|EM7 d|0~~99999|
1766		-|Bit|EM8|EM8|EM8 d|0~~99999|
1767		-|Bit|EM9|EM9|EM9 d|0~~99999|
1768		-|Bit|EMA|EMA|EMA d|0~~99999|
1769		-|Bit|EMB|EMB|EMB d|0~~99999|
1770		-|Bit|EMC|EMC|EMC d|0~~99999|
1771		-|Bit|Lamp|Lamp|Lamp d|0~~0|
1772		-|Word|CIO|CIO|CIO d|0~~99999|
1773		-|Word|W|W|W d|0~~99999|
1774		-|Word|D|D|D d|0~~99999|
1775		-|Word|H|H|H d|0~~99999|
1776		-|Word|A|A|A d|0~~99999|
1777		-|Word|T|T|T h|0~~99999|
1778		-|Word|CF|CF|CF d|0~~99999|
1779		-|Word|FF|FF|FF d|0~~99999|
1780		-|Word|C|C|C d|0~~99999|
1781		-|Word|EM0|EM0|EM0 d|0~~99999|
1782		-|Word|EM1|EM1|EM1 d|0~~99999|
1783		-|Word|EM2|EM2|EM2 d|0~~99999|
1784		-|Word|EM3|EM3|EM3 d|0~~99999|
1785		-|Word|EM4|EM4|EM4 d|0~~99999|
1786		-|Word|EM5|EM5|EM5 h|0~~99999|
1787		-|Word|EM6|EM6|EM6 d|0~~99999|
1788		-|Word|EM7|EM7|EM7 d|0~~99999|
1789		-|Word|EM8|EM8|EM8 d|0~~99999|
1790		-|Word|EM9|EM9|EM9 d|0~~99999|
1791		-|Word|EMA|EMA|EMA d|0~~99999|
1792		-|Word|EMB|EMB|EMB d|0~~99999|
1793		-|Word|EMC|EMC|EMC d|0~~99999|
1794		-|Word|IR|IR|IR d|0~~99999|
1795		-|Word|DR|DR|DR d|0~~99999|
	1802	+(% class="table-bordered" %)
	1803	+|**Type**|**Register**|**Function code & Description**
	1804	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	1805	+|06 (write single register: write a binary value to a holding register)
	1806	+|10 (write values to multiple addresses )
	1807	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	1808	+|06 (write single register: write a binary value to a holding register)
	1809	+|10 (write values to multiple addresses )
	1810	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	1811	+|06 (write single register: write a binary value to a holding register)
	1812	+|10 (write values to multiple addresses )
	1813	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	1814	+|10 (write values to multiple addresses )
	1815	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	1816	+|05 (Force a single coil to force the on/off state of a logic coil)
	1817	+|0F (Write multiple bits, ie write continuously)
	1818	+|(% rowspan="3" %)1|02 (Read the input state)
	1819	+|05 (Force a single coil to force the on/off state of a logic coil)
	1820	+|0F (Write multiple bits)
	1821	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	1822	+|05 (Force a single coil to force the on/off state of a logic coil)
	1823	+|0F (Write multiple bits)
	1824	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	1825	+|0F (Write multiple bits)
1796	1796
1797		-**3）Configure the communication protocol**
	1827	+**Communication Settings**
1798	1798
1799		-[[image:image-20220830143348-1.png]]
	1829	+Enable HMI Ethernet in [Project Settings];
1800	1800
1801		-[[image:image-20220830143511-2.png]]
	1831	+(% style="text-align:center" %)
	1832	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
1802	1802
	1834	+Set PLC IP in [Device IP] settings;
1803	1803
	1836	+(% style="text-align:center" %)
	1837	+[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
1804	1804
1805		-**4）Cable Wiring**
	1839	+**Cable Wiring**
1806	1806
1807		-Pin Definition Diagram
	1841	+(% style="text-align:center" %)
	1842	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1808	1808
1809		-[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1844	+= **Omron** =
1810	1810
1811		-== **EC55 Protocol** ==
	1846	+== **EC55** ==
1812	1812
1813	1813	Supported device: EC55 temperature instrument
1814	1814
1815	1815	**HMI Settings**
1816	1816
	1852	+(% class="table-bordered" %)
1817	1817	|**Items**|**Settings**|**Note**
1818	1818	|Protocol|Omron EC55|
1819	1819	|Connection|RS485 (9600, 2, 7, EVEN)|
...	...	@@ -1822,6 +1822,7 @@
1822	1822
1823	1823	**Address List**
1824	1824
	1861	+(% class="table-bordered" %)
1825	1825	|**Type**|**Register**|**Device range**|**HMI range**|**Function**
1826	1826	|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
1827	1827	|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
...	...	@@ -1867,14 +1867,15 @@
1867	1867	* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
1868	1868	* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
1869	1869	* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
1870		-* [[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
	1907	+* (% id="cke_bm_8690S" style="display:none" %)[[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]](%%)Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
1871	1871
1872		-== **EtherNet/IP NX series Protocol** ==
	1909	+== EtherNet/IP NX series ==
1873	1873
1874	1874	Supported series: Omron NX/NJ series
1875	1875
1876	1876	**HMI Setting**
1877	1877
	1915	+(% class="table-bordered" %)
1878	1878	|**Items**|**Settings**|**Note**
1879	1879	|Protocol|Omron NX Ethernet/IP|
1880	1880	|Connection|Ethernet|
...	...	@@ -1926,224 +1926,183 @@
1926	1926	(% style="text-align:center" %)
1927	1927	[[image:12.PLC Protocol_html_437cb087b36b5784.png||data-xwiki-image-style-alignment="center" height="330" width="600" class="img-thumbnail"]]
1928	1928
	1967	+
1929	1929	(% style="text-align:center" %)
1930	1930	[[image:12.PLC Protocol_html_60ef71528a99abf5.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
1931	1931
1932	1932	**Cable Wiring**
1933	1933
1934		-[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1935		-
1936		-= **MODBUS** =
1937		-
1938		-== **MODBUS RTU Master** ==
1939		-
1940		-Supported Series: MODBUS RTU CONTROLLER
1941		-
1942		-HMI works as MODBUS SLAVE connecting with MASTER
1943		-
1944	1944	(% style="text-align:center" %)
1945		-[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1974	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1946	1946
	1976	+= **OpenCAN** =
1947	1947
1948		-(% style="text-align:center" %)
1949		-[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1978	+OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
1950	1950
	1980	+This protocol is only available in PI8000 series HMI.
1951	1951
1952		-(% style="text-align:center" %)
1953		-[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1954		-
1955	1955	**HMI Settings**
1956	1956
1957	1957	(% class="table-bordered" %)
1958	1958	|**Items**|**Settings**|**Note**
1959		-|Protocol|MODBUS RTU Master|
1960		-|Connection|RS485/RS232|
1961		-|Baud rate|2400~~187500|
1962		-|Data bit|8|
1963		-|Parity|Even/ Odd/ None|
1964		-|Stop bit|1/2|
1965		-|Station No.|0~~255|
	1986	+|Protocol|OPENCAN|
	1987	+|Connection|CAN port|
	1988	+|Baud rate|250000|
1966	1966
1967		-**Address List**
	1990	+**CAN frame setting in HMI**
1968	1968
1969		-(% class="table-bordered" %)
1970		-|**Type**|**HMI address**|**MODBUS code**|**Range**
1971		-|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
1972		-|Word|HDW3500~~HDW7999|4|0~~4499
	1992	+Click [OpenCAN setting] button in communication setting window;
1973	1973
1974		-**Cable Wiring**
	1994	+(% style="text-align:center" %)
	1995	+[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
1975	1975
1976		-* **RS485**
	1997	+Click [Add] to create a new frame;
1977	1977
1978	1978	(% style="text-align:center" %)
1979		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	2000	+[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
1980	1980
1981		-(% style="text-align:center" %)
1982		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	2002	+(% class="table-bordered" %)
	2003	+|**No**|**Items**|**Description**
	2004	+|1|Add|add a frame related to register address
	2005	+|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
	2006	+|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
	2007	+|4|Modify|Modify the frames in frame management
	2008	+|5|Copy|Copy one frame to another
	2009	+|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
	2010	+|7|Empty|All frames in the list are cleared
	2011	+|8|Browse|Displays configuration files in XML format in IE
	2012	+|9|OK|Complete the configuration of the frame and exit
1983	1983
1984		-* **RS232**
	2014	+Set CANBUS frame in setting windows
1985	1985
1986	1986	(% style="text-align:center" %)
1987		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	2017	+[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
1988	1988
1989		-**✎Note:** COM3 only available in PI8000/PI9000 series.
	2019	+(% class="table-bordered" %)
	2020	+|**No**|(% style="width:185px" %)**Items**|(% style="width:854px" %)**Description**
	2021	+|1|(% style="width:185px" %)ID|(% style="width:854px" %)Set the ID of a can frame in hexadecimal format;
	2022	+|2|(% style="width:185px" %)ID assign|(% style="width:854px" %)split the ID by PF, PS, and SA;
	2023	+|3|(% style="width:185px" %)Frame type|(% style="width:854px" %)Select Standard frame or Extended Frame;
	2024	+|4|(% style="width:185px" %)Frame format|(% style="width:854px" %)Select between data frame and remote Frame;
	2025	+|5|(% style="width:185px" %)Data|(% style="width:854px" %)Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
	2026	+|6|(% style="width:185px" %)Use address|(% style="width:854px" %)(((
	2027	+Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
1990	1990
1991		-== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
	2029	+**Edit:** Set a bit or word address by its format;
1992	1992
1993		-Supported Series: MODBUS RTU CONTROLLER
	2031	+**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
	2032	+)))
	2033	+|(% rowspan="8" %)7|(% rowspan="8" style="width:185px" %)Data interactive configuration|(% style="width:854px" %)There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
	2034	+|(% style="width:854px" %)Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
	2035	+|(% style="width:854px" %)Feedback mode: feedback mode includes no response, confirm response and data response;
	2036	+|(% style="width:854px" %)No response: the device or touch screen will not receive feedback;
	2037	+|(% style="width:854px" %)Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
	2038	+|(% style="width:854px" %)Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
	2039	+|(% style="width:854px" %)response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
	2040	+|(% style="width:854px" %)Response timeout: sets whether the response frame timeout;
	2041	+|(% rowspan="3" %)8|(% rowspan="3" style="width:185px" %)Control address|(% style="width:854px" %)If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
	2042	+|(% style="width:854px" %)Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
	2043	+|(% style="width:854px" %)Manually send: a manually send tick indicates only one send;
	2044	+|9|(% style="width:185px" %)Flag configuration|(% style="width:854px" %)Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
	2045	+|10|(% style="width:185px" %)Note|(% style="width:854px" %)Fill the text to explain the meaning of the frame;
	2046	+|11|(% style="width:185px" %)Data assign|(% style="width:854px" %)Preview the display in this table based on the address and the corresponding number of digits;
	2047	+|12|(% style="width:185px" %)Current operation display|(% style="width:854px" %)Display the description of current operation;
	2048	+|13|(% style="width:185px" %)Add|(% style="width:854px" %)Add a new frame;
	2049	+|14|(% style="width:185px" %)Save frame|(% style="width:854px" %)Save the configured frame format;
	2050	+|15|(% style="width:185px" %)Cancel|(% style="width:854px" %)Cancel the frame configuration;
1994	1994
1995		-HMI works as MODBUS MASTER connecting with SLAVE.
	2052	+Set CAN address (Read or write operation);
1996	1996
1997		-The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
1998		-
1999	1999	(% style="text-align:center" %)
2000		-[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	2055	+[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
2001	2001
	2057	+(% class="table-bordered" %)
	2058	+|**No.**|(% style="width:207px" %)**Item**|(% style="width:829px" %)**Description**
	2059	+|1|(% style="width:207px" %)Current address|(% style="width:829px" %)Displays the register type and register address set by the user in the data access interface
	2060	+|(% rowspan="3" %)2|(% rowspan="3" style="width:207px" %)Trigger|(% style="width:829px" %)Two operations, "read" and "write," are based on on-screen registers
	2061	+|(% style="width:829px" %)If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
	2062	+|(% style="width:829px" %)If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
	2063	+|(% rowspan="5" %)3|(% rowspan="3" style="width:207px" %)Data operation|(% style="width:829px" %)The read and write operations in the trigger conditions are set accordingly.
	2064	+|(% style="width:829px" %)If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
	2065	+|(% style="width:829px" %)If the trigger condition is a writing operation, there are two situations:(((
	2066	+* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
	2067	+* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
	2068	+)))
	2069	+|(% rowspan="2" style="width:207px" %)Position and length input format|(% style="width:829px" %)If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
	2070	+|(% style="width:829px" %)If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
	2071	+|4|(% style="width:207px" %)Add|(% style="width:829px" %)Add current configuration
	2072	+|5|(% style="width:207px" %)Close|(% style="width:829px" %)Close the configuration window to exit
2002	2002
2003		-(% style="text-align:center" %)
2004		-[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	2074	+**Multiple Packages Settings**
2005	2005
2006		-
2007	2007	(% style="text-align:center" %)
2008		-[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	2077	+[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
2009	2009
2010		-**HMI Settings**
	2079	+Check [Multiple packages supported] to open [Multiple package data] window, as below show.
2011	2011
2012		-(% class="table-bordered" %)
2013		-|**Items**|**Settings**|**Note**
2014		-|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
2015		-|Connection|RS485/RS232|
2016		-|Baud rate|2400~~187500|
2017		-|Data bit|8|
2018		-|Parity|Even/ Odd/ None|
2019		-|Stop bit|1/2|
2020		-|PLC station No.|0~~255|
	2081	+Select Multiple package type
2021	2021
2022		-**Address List**
	2083	+* Not Multiple packages
	2084	+* J1939 Multiple packages
	2085	+* Customized Multiple packages
2023	2023
2024		-(% class="table-bordered" %)
2025		-|**Type**|**Address Type**|**Function code & Description**
2026		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
2027		-|06 (write single register: write a binary value to a holding register)
2028		-|10 (write values to multiple addresses )
2029		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
2030		-|06 (write single register: write a binary value to a holding register)
2031		-|10 (write values to multiple addresses )
2032		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
2033		-|06 (write single register: write a binary value to a holding register)
2034		-|10 (write values to multiple addresses )
2035		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
2036		-|10 (write values to multiple addresses )
2037		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
2038		-|05 (Force a single coil to force the on/off state of a logic coil)
2039		-|0F (Write multiple bits, ie write continuously)
2040		-|(% rowspan="3" %)1|02 (Read the input state)
2041		-|05 (Force a single coil to force the on/off state of a logic coil)
2042		-|0F (Write multiple bits)
2043		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
2044		-|05 (Force a single coil to force the on/off state of a logic coil)
2045		-|0F (Write multiple bits)
2046		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
2047		-|0F (Write multiple bits)
	2087	+Click [Edit Receive data] for [Receive] settings
2048	2048
2049		-**✎Note:**
	2089	+* Start code+ Total length (J1939)
2050	2050
2051		-* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
2052		-* The function codes sent out are the same as those that read and write words.
	2091	+(% style="text-align:center" %)
	2092	+[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
2053	2053
2054		-**Station number for more than one slaves**
	2094	+As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
2055	2055
2056		-If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
	2096	+* Start code + Data max length (J1939)
2057	2057
2058	2058	(% style="text-align:center" %)
2059		-[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
	2099	+[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
2060	2060
2061		-**Cable Wiring**
	2101	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
2062	2062
2063		-* **RS485**
	2103	+* Data max length (J1939)
2064	2064
2065	2065	(% style="text-align:center" %)
2066		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	2106	+[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
2067	2067
2068		-(% style="text-align:center" %)
2069		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	2108	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
2070	2070
2071		-* **RS232**
	2110	+* Customized multiple package
2072	2072
2073	2073	(% style="text-align:center" %)
2074		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	2113	+[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
2075	2075
2076		-**✎Note:** COM3 only available in PI8000/PI9000 series.
	2115	+As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
2077	2077
2078		-== **MODBUS TCP Slave (All function)** ==
	2117	+Click [Edit Send data] for [Send] setting
2079	2079
2080		-Supported series: MODBUS TCP controller
	2119	+* J1939
2081	2081
2082		-HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
2083		-
2084	2084	(% style="text-align:center" %)
2085		-[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	2122	+[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
2086	2086
2087		-(% style="text-align:center" %)
2088		-[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
	2124	+[Data] is all data to be sent.
2089	2089
	2126	+Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
2090	2090
2091		-(% style="text-align:center" %)
2092		-[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
	2128	+* Customized multiple package
2093	2093
2094		-**HMI Setting**
2095		-
2096		-(% class="table-bordered" %)
2097		-|**Items**|**Settings**|**Note**
2098		-|Protocol|MODBUS TCP Slave (All function)|
2099		-|Connection|Ethernet|
2100		-|Port No.|502|
2101		-|PLC station No.|1|
2102		-
2103		-**Address List**
2104		-
2105		-(% class="table-bordered" %)
2106		-|**Type**|**Register**|**Function code & Description**
2107		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
2108		-|06 (write single register: write a binary value to a holding register)
2109		-|10 (write values to multiple addresses )
2110		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
2111		-|06 (write single register: write a binary value to a holding register)
2112		-|10 (write values to multiple addresses )
2113		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
2114		-|06 (write single register: write a binary value to a holding register)
2115		-|10 (write values to multiple addresses )
2116		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
2117		-|10 (write values to multiple addresses )
2118		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
2119		-|05 (Force a single coil to force the on/off state of a logic coil)
2120		-|0F (Write multiple bits, ie write continuously)
2121		-|(% rowspan="3" %)1|02 (Read the input state)
2122		-|05 (Force a single coil to force the on/off state of a logic coil)
2123		-|0F (Write multiple bits)
2124		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
2125		-|05 (Force a single coil to force the on/off state of a logic coil)
2126		-|0F (Write multiple bits)
2127		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
2128		-|0F (Write multiple bits)
2129		-
2130		-**Communication Settings**
2131		-
2132		-Enable HMI Ethernet in [Project Settings];
2133		-
2134	2134	(% style="text-align:center" %)
2135		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2131	+[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
2136	2136
2137		-Set PLC IP in [Device IP] settings;
	2133	+[Data] is all data to be sent.
2138	2138
2139		-(% style="text-align:center" %)
2140		-[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	2135	+As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
2141	2141
2142	2142	**Cable Wiring**
2143	2143
2144	2144	(% style="text-align:center" %)
2145		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	2140	+[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
2146	2146
	2142	+**✎Note:** The address interval between each frame need to be more than a word address;
	2143	+
2147	2147	= **SHIMADEN** =
2148	2148
2149	2149	== **FP23** ==
...	...	@@ -2943,168 +2943,3 @@
2943	2943	**Cable Wiring**
2944	2944
2945	2945	[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
2946		-
2947		-
2948		-= **OpenCAN** =
2949		-
2950		-OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
2951		-
2952		-This protocol is only available in PI8000 series HMI.
2953		-
2954		-**HMI Settings**
2955		-
2956		-|**Items**|**Settings**|**Note**
2957		-|Protocol|OPENCAN|
2958		-|Connection|CAN port|
2959		-|Baud rate|250000|
2960		-
2961		-**CAN frame setting in HMI**
2962		-
2963		-Click [OpenCAN setting] button in communication setting window;
2964		-
2965		-(% style="text-align:center" %)
2966		-[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
2967		-
2968		-Click [Add] to create a new frame;
2969		-
2970		-(% style="text-align:center" %)
2971		-[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
2972		-
2973		-|**No**|**Items**|**Description**
2974		-|1|Add|add a frame related to register address
2975		-|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
2976		-|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
2977		-|4|Modify|Modify the frames in frame management
2978		-|5|Copy|Copy one frame to another
2979		-|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
2980		-|7|Empty|All frames in the list are cleared
2981		-|8|Browse|Displays configuration files in XML format in IE
2982		-|9|OK|Complete the configuration of the frame and exit
2983		-
2984		-Set CANBUS frame in setting windows
2985		-
2986		-(% style="text-align:center" %)
2987		-[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
2988		-
2989		-|**No**|**Items**|**Description**
2990		-|1|ID|Set the ID of a can frame in hexadecimal format;
2991		-|2|ID assign|split the ID by PF, PS, and SA;
2992		-|3|Frame type|Select Standard frame or Extended Frame;
2993		-|4|Frame format|Select between data frame and remote Frame;
2994		-|5|Data|Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
2995		-|6|Use address|(((
2996		-Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
2997		-
2998		-**Edit:** Set a bit or word address by its format;
2999		-
3000		-**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
3001		-)))
3002		-|(% rowspan="8" %)7|(% rowspan="8" %)Data interactive configuration|There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
3003		-|Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
3004		-|Feedback mode: feedback mode includes no response, confirm response and data response;
3005		-|No response: the device or touch screen will not receive feedback;
3006		-|Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
3007		-|Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
3008		-|response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
3009		-|Response timeout: sets whether the response frame timeout;
3010		-|(% rowspan="3" %)8|(% rowspan="3" %)Control address|If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
3011		-|Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
3012		-|Manually send: a manually send tick indicates only one send;
3013		-|9|Flag configuration|Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
3014		-|10|Note|Fill the text to explain the meaning of the frame;
3015		-|11|Data assign|Preview the display in this table based on the address and the corresponding number of digits;
3016		-|12|Current operation display|Display the description of current operation;
3017		-|13|Add|Add a new frame;
3018		-|14|Save frame|Save the configured frame format;
3019		-|15|Cancel|Cancel the frame configuration;
3020		-
3021		-Set CAN address (Read or write operation);
3022		-
3023		-(% style="text-align:center" %)
3024		-[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
3025		-
3026		-|**No.**|**Item**|**Description**
3027		-|1|Current address|Displays the register type and register address set by the user in the data access interface
3028		-|(% rowspan="3" %)2|(% rowspan="3" %)Trigger|Two operations, "read" and "write," are based on on-screen registers
3029		-|If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
3030		-|If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
3031		-|(% rowspan="5" %)3|(% rowspan="3" %)Data operation|The read and write operations in the trigger conditions are set accordingly.
3032		-|If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
3033		-|If the trigger condition is a writing operation, there are two situations:(((
3034		-* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
3035		-* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
3036		-)))
3037		-|(% rowspan="2" %)Position and length input format|If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
3038		-|If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
3039		-|4|Add|Add current configuration
3040		-|5|Close|Close the configuration window to exit
3041		-
3042		-**Multiple Packages Settings**
3043		-
3044		-(% style="text-align:center" %)
3045		-[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
3046		-
3047		-Check [Multiple packages supported] to open [Multiple package data] window, as below show.
3048		-
3049		-Select Multiple package type
3050		-
3051		-* Not Multiple packages
3052		-* J1939 Multiple packages
3053		-* Customized Multiple packages
3054		-
3055		-Click [Edit Receive data] for [Receive] settings
3056		-
3057		-* Start code+ Total length (J1939)
3058		-
3059		-(% style="text-align:center" %)
3060		-[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
3061		-
3062		-As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
3063		-
3064		-* Start code + Data max length (J1939)
3065		-
3066		-(% style="text-align:center" %)
3067		-[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
3068		-
3069		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
3070		-
3071		-* Data max length (J1939)
3072		-
3073		-(% style="text-align:center" %)
3074		-[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
3075		-
3076		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
3077		-
3078		-* Customized multiple package
3079		-
3080		-(% style="text-align:center" %)
3081		-[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
3082		-
3083		-As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
3084		-
3085		-Click [Edit Send data] for [Send] setting
3086		-
3087		-* J1939
3088		-
3089		-(% style="text-align:center" %)
3090		-[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
3091		-
3092		-[Data] is all data to be sent.
3093		-
3094		-Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
3095		-
3096		-* Customized multiple package
3097		-
3098		-(% style="text-align:center" %)
3099		-[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
3100		-
3101		-[Data] is all data to be sent.
3102		-
3103		-As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
3104		-
3105		-**Cable Wiring**
3106		-
3107		-(% style="text-align:center" %)
3108		-[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
3109		-
3110		-**✎Note:** The address interval between each frame need to be more than a word address;

image-20220830094600-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-40.4 KB

Content

image-20220830094657-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-53.4 KB

Content

image-20220830094929-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-90.4 KB

Content

image-20220830095131-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-25.7 KB

Content

image-20220830140537-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-35.2 KB

Content

image-20220830140629-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-48.4 KB

Content

image-20220830141138-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-82.9 KB

Content

image-20220830143348-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-35.9 KB

Content

image-20220830143511-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Ben

Size

...	...	@@ -1,1 +1,0 @@
1		-46.3 KB

Content