Skip to Content

Changes for page 12 PLC Protocol OLD

Last modified by Mora Zhou on 2024/12/05 14:53
From version 61.1
edited by Hunter
on 2022/08/23 17:16
Change comment: There is no comment for this version
To version 69.1
edited by Ben
on 2022/08/29 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Hunter
1 +XWiki.Ben
Content
... ... @@ -87,19 +87,74 @@
87 87  
88 88  = Create communication with WECON PLC =
89 89  
90 -== HMI settings ==
90 +== **LX3V Serial Protocol** ==
91 91  
92 +Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
93 +
94 +**HMI Settings**
95 +
96 +(% class="table-bordered" %)
97 +|**Item**|**Settings**|**Note**
98 +|Protocol|WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM|
99 +|Connection|RS422/RS485|
100 +|Baud rate|9600|
101 +|Data bit|7|
102 +|Parity|EVEN|
103 +|Stop bit|1|
104 +|PLC station No.|1|
105 +
106 +**Address List**
107 +
108 +(% class="table-bordered" %)
109 +|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
110 +|(% rowspan="6" %)Bit|X|X|Xo|0~~303237|
111 +|Y|Y|Y o|0~~303237|
112 +|M|M|M d|0~~99999|
113 +|T|T|T d|0~~99999|
114 +|C|C|C d|0~~99999|
115 +|S|S|S d|0~~99999|
116 +|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
117 +|Y|Y|Y o|0~~303237|
118 +|M|M|M d|0~~99999|
119 +|T|T|T d|0~~99999|
120 +|C|C|C d|0~~199|
121 +|D|D|D d|0~~7999|
122 +|S|S|S d|0~~99999|
123 +|SD|SD|SD d|8000~~9999|
124 +
125 +**Cable Wiring**
126 +
127 +* **RS485**
128 +
129 +(% style="text-align:center" %)
130 +[[image:12.PLC Protocol_html_1897d92be6948d58.png||data-xwiki-image-style-alignment="center" height="223" width="393" class="img-thumbnail"]]
131 +
132 +* **RS422**
133 +
134 +(% style="text-align:center" %)
135 +[[image:12.PLC Protocol_html_5c7fca9a70da2ee8.png||data-xwiki-image-style-alignment="center" height="247" width="389" class="img-thumbnail"]]
136 +
137 +**✎Note:**
138 +
139 +* HMI COM3 is available in PI8000 series and COM3 is in COM2(hardware PIN 7 and PIN 8) .
140 +* If PLC <= 20 points,such as LX3V-1208/LX3V-0806 PLC,PLC RS485A and RS485B mean PLC COM2 RS485+ and RS485- .PLC COM2 can support modbus. Please refer to PLC COM2 setting manual.
141 +
142 +[[https:~~/~~/drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing>>url:https://drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing]]
143 +
144 +(% class="wikigeneratedid" id="HHMIsettings" %)
145 +**HMI settings**
146 +
92 92  **Download PIStudio Software**
93 93  
94 94  Please visit the link below to get the latest version PIstudio for HMI programming:
95 95  
96 -* [[Download>>https://ftp.we-con.com.cn/Download/Software/PIStudio20211210.zip]] or [[Download>>https://drive.google.com/open?id=1Im7YS2rtnRI7yFIHmqHDVPBUyWahqSXN]]
151 +* [[Download link>>doc:PIStudio.Download.3 Software.WebHome]]
97 97  
98 98  **Create a new HMI project connect with PLC**
99 99  
100 100  Check the link below for the video to show you how to get started with a new project
101 101  
102 -* [[Video>>https://drive.google.com/open?id=0B0j9uum1UPXbMENtRlF2VzdQdHc]]
157 +* [[Video>>https://youtu.be/0FpmDZe_8U8]]
103 103  
104 104  For more videos, please visit our Youtube channel: [[http:~~/~~/www.youtube.com/user/Wecon2004/videos>>url:http://www.youtube.com/user/Wecon2004/videos]]
105 105  
... ... @@ -176,7 +176,8 @@
176 176  * HMI setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/>>https://docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/]]
177 177  * PLC setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/>>https://docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/]]
178 178  
179 -== PLC settings ==
234 +(% class="wikigeneratedid" id="HPLCsettings" %)
235 +**PLC settings**
180 180  
181 181  **Download PLC Software**
182 182  
... ... @@ -261,6 +261,160 @@
261 261  (% style="text-align:center" %)
262 262  [[image:image-20220819105928-9.png||height="229" width="669"]]
263 263  
320 +== **LX5V Serial Protocol** ==
321 +
322 +This example introduces the establishment of serial port communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
323 +
324 +**Software configuration of PLC**
325 +
326 +**1）PLC programming software**
327 +
328 +[[image:image-20220810164710-1.png]]
329 +
330 +**2）New PLC project**
331 +
332 +Click New Project and select the PLC model.
333 +
334 +[[image:image-20220810172412-1.png]]
335 +
336 +
337 +**3）Set Serial port parameters**
338 +
339 +Follow the steps below to configure Serial port parameters
340 +
341 +Baud rate：115200
342 +
343 +Data bit：8
344 +
345 +Stop bit：1
346 +
347 +Parity：No verification
348 +
349 +[[image:image-20220810165759-3.png]]
350 +
351 +
352 +**4）Registers list**
353 +
354 +[[image:image-20220811102219-3.png]]
355 +
356 +
357 +**HMI software configuration**
358 +
359 +**1）HMI programming software**
360 +
361 + [[image:image-20220810171237-4.png]]
362 +
363 +**2）New HMI project**
364 +
365 +Click New Project and select the HMI model.
366 +
367 +[[image:image-20220810172010-5.png]]
368 +
369 +**3）Set communication port parameters**
370 +
371 +Click the communication configuration button on the left to find the communication protocol with LX5V. After selecting the protocol, configure the communication parameters of the COM port.
372 +
373 +Baud rate：115200
374 +
375 +Data bit：8
376 +
377 +Stop bit：1
378 +
379 +Parity：No verification
380 +
381 +
382 +[[image:image-20220811104012-1.png]]
383 +
384 +
385 +**hardware connection**
386 +
387 +**1）Hardware wiring diagram**
388 +
389 +This example introduces WeconHMI with LX5V PLC to establish communication through serial port. The connection diagram is as follows:
390 +
391 +[[image:image-20220811103005-4.png]]
392 +
393 +
394 +[[image:image-20220811103227-7.png]]
395 +
396 +The above are all the steps for establishing serial port communication between Wecon HMI with LX5V PLC.
397 +
398 +== **LX5V-N Ethernet protocol** ==
399 +
400 +(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
401 +
402 +
403 +**Software configuration of PLC**
404 +
405 +**1）PLC programming software**
406 +
407 +[[image:image-20220810164710-1.png]]
408 +
409 +**2）New PLC project**
410 +
411 +Click New Project and select the PLC model.
412 +
413 +[[image:image-20220811115454-1.png]]
414 +
415 +
416 +**3）Set Ethernet port parameters**
417 +
418 +Follow the steps below to configure Ethernet parameters
419 +
420 +PLC IP address：192.168.39.200
421 +
422 +default gateway：192.168.39.1
423 +
424 +subnet mask：255.255.255.0
425 +
426 +[[image:image-20220811140530-2.png]]
427 +
428 +
429 +**4）Registers list**
430 +
431 +[[image:image-20220811102219-3.png]]
432 +
433 +
434 +**HMI software configuration**
435 +
436 +**1）HMI programming software**
437 +
438 + [[image:image-20220810171237-4.png]]
439 +
440 +**2）New HMI project**
441 +
442 +Click New Project and select the HMI model.
443 +
444 +[[image:image-20220810172010-5.png]]
445 +
446 +**3）Set communication port parameters**
447 +
448 +Click the project setting button on the left to configure the IP address of the HMI machine to ensure that the HMI and PLC IP remain in a local area network.
449 +
450 +HMI IP address：192.168.39.201
451 +
452 +default gateway：192.168.39.1
453 +
454 +subnet mask：255.255.255.0
455 +
456 +[[image:image-20220811170753-2.png]]
457 +
458 +Next, click Communication Settings to configure the IP of the HMI communication object.
459 +
460 +[[image:image-20220811163047-1.png]]
461 +
462 +**hardware connection**
463 +
464 +**1）Hardware wiring diagram**
465 +
466 +This example introduces WeconHMI with LX5V-N PLC to establish communication through ethernet. The connection diagram is as follows:
467 +
468 +[[image:image-20220811170248-1.png]]
469 +
470 +The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
471 +
472 += =
473 +
264 264  = **Allen-Bradley** =
265 265  
266 266  == **FreeTag Ethernet/IP (CompactLogix)** ==
... ... @@ -2439,213 +2439,8 @@
2439 2439  
2440 2440  **✎Note:** COM3 only available in PI8000/PI9000 series.
2441 2441  
2442 -= **WECON PLC** =
2652 += =
2443 2443  
2444 -Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
2445 -
2446 -**HMI Settings**
2447 -
2448 -(% class="table-bordered" %)
2449 -|**Item**|**Settings**|**Note**
2450 -|Protocol|WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM|
2451 -|Connection|RS422/RS485|
2452 -|Baud rate|9600|
2453 -|Data bit|7|
2454 -|Parity|EVEN|
2455 -|Stop bit|1|
2456 -|PLC station No.|1|
2457 -
2458 -**Address List**
2459 -
2460 -(% class="table-bordered" %)
2461 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
2462 -|(% rowspan="6" %)Bit|X|X|Xo|0~~303237|
2463 -|Y|Y|Y o|0~~303237|
2464 -|M|M|M d|0~~99999|
2465 -|T|T|T d|0~~99999|
2466 -|C|C|C d|0~~99999|
2467 -|S|S|S d|0~~99999|
2468 -|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
2469 -|Y|Y|Y o|0~~303237|
2470 -|M|M|M d|0~~99999|
2471 -|T|T|T d|0~~99999|
2472 -|C|C|C d|0~~199|
2473 -|D|D|D d|0~~7999|
2474 -|S|S|S d|0~~99999|
2475 -|SD|SD|SD d|8000~~9999|
2476 -
2477 -**Cable Wiring**
2478 -
2479 -* **RS485**
2480 -
2481 -(% style="text-align:center" %)
2482 -[[image:12.PLC Protocol_html_1897d92be6948d58.png||data-xwiki-image-style-alignment="center" height="223" width="393" class="img-thumbnail"]]
2483 -
2484 -* **RS422**
2485 -
2486 -(% style="text-align:center" %)
2487 -[[image:12.PLC Protocol_html_5c7fca9a70da2ee8.png||data-xwiki-image-style-alignment="center" height="247" width="389" class="img-thumbnail"]]
2488 -
2489 -**✎Note:**
2490 -
2491 -* HMI COM3 is available in PI8000 series and COM3 is in COM2(hardware PIN 7 and PIN 8) .
2492 -* If PLC <= 20 points,such as LX3V-1208/LX3V-0806 PLC,PLC RS485A and RS485B mean PLC COM2 RS485+ and RS485- .PLC COM2 can support modbus. Please refer to PLC COM2 setting manual.
2493 -
2494 -[[https:~~/~~/drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing>>url:https://drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing]]
2495 -
2496 -
2497 -== **HMI and Wecon LX5V serial communication** ==
2498 -
2499 -This example introduces the establishment of serial port communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
2500 -
2501 -**Software configuration of PLC**
2502 -
2503 -**1）PLC programming software**
2504 -
2505 -[[image:image-20220810164710-1.png]]
2506 -
2507 -**2）New PLC project**
2508 -
2509 -Click New Project and select the PLC model.
2510 -
2511 -[[image:image-20220810172412-1.png]]
2512 -
2513 -
2514 -**3）Set Serial port parameters**
2515 -
2516 -Follow the steps below to configure Serial port parameters
2517 -
2518 -Baud rate：115200
2519 -
2520 -Data bit：8
2521 -
2522 -Stop bit：1
2523 -
2524 -Parity：No verification
2525 -
2526 -[[image:image-20220810165759-3.png]]
2527 -
2528 -
2529 -**4）Registers list**
2530 -
2531 -[[image:image-20220811102219-3.png]]
2532 -
2533 -
2534 -**HMI software configuration**
2535 -
2536 -**1）HMI programming software**
2537 -
2538 - [[image:image-20220810171237-4.png]]
2539 -
2540 -**2）New HMI project**
2541 -
2542 -Click New Project and select the HMI model.
2543 -
2544 -[[image:image-20220810172010-5.png]]
2545 -
2546 -**3）Set communication port parameters**
2547 -
2548 -Click the communication configuration button on the left to find the communication protocol with LX5V. After selecting the protocol, configure the communication parameters of the COM port.
2549 -
2550 -Baud rate：115200
2551 -
2552 -Data bit：8
2553 -
2554 -Stop bit：1
2555 -
2556 -Parity：No verification
2557 -
2558 -
2559 -[[image:image-20220811104012-1.png]]
2560 -
2561 -
2562 -**hardware connection**
2563 -
2564 -**1）Hardware wiring diagram**
2565 -
2566 -This example introduces WeconHMI with LX5V PLC to establish communication through serial port. The connection diagram is as follows:
2567 -
2568 -[[image:image-20220811103005-4.png]]
2569 -
2570 -
2571 -[[image:image-20220811103227-7.png]]
2572 -
2573 -The above are all the steps for establishing serial port communication between Wecon HMI with LX5V PLC.
2574 -
2575 -== **HMI and Wecon LX5V-N Ethernet communication** ==
2576 -
2577 -(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
2578 -
2579 -
2580 -**Software configuration of PLC**
2581 -
2582 -**1）PLC programming software**
2583 -
2584 -[[image:image-20220810164710-1.png]]
2585 -
2586 -**2）New PLC project**
2587 -
2588 -Click New Project and select the PLC model.
2589 -
2590 -[[image:image-20220811115454-1.png]]
2591 -
2592 -
2593 -**3）Set Ethernet port parameters**
2594 -
2595 -Follow the steps below to configure Ethernet parameters
2596 -
2597 -PLC IP address：192.168.39.200
2598 -
2599 -default gateway：192.168.39.1
2600 -
2601 -subnet mask：255.255.255.0
2602 -
2603 -[[image:image-20220811140530-2.png]]
2604 -
2605 -
2606 -**4）Registers list**
2607 -
2608 -[[image:image-20220811102219-3.png]]
2609 -
2610 -
2611 -**HMI software configuration**
2612 -
2613 -**1）HMI programming software**
2614 -
2615 - [[image:image-20220810171237-4.png]]
2616 -
2617 -**2）New HMI project**
2618 -
2619 -Click New Project and select the HMI model.
2620 -
2621 -[[image:image-20220810172010-5.png]]
2622 -
2623 -**3）Set communication port parameters**
2624 -
2625 -Click the project setting button on the left to configure the IP address of the HMI machine to ensure that the HMI and PLC IP remain in a local area network.
2626 -
2627 -HMI IP address：192.168.39.201
2628 -
2629 -default gateway：192.168.39.1
2630 -
2631 -subnet mask：255.255.255.0
2632 -
2633 -[[image:image-20220811170753-2.png]]
2634 -
2635 -Next, click Communication Settings to configure the IP of the HMI communication object.
2636 -
2637 -[[image:image-20220811163047-1.png]]
2638 -
2639 -**hardware connection**
2640 -
2641 -**1）Hardware wiring diagram**
2642 -
2643 -This example introduces WeconHMI with LX5V-N PLC to establish communication through ethernet. The connection diagram is as follows:
2644 -
2645 -[[image:image-20220811170248-1.png]]
2646 -
2647 -The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
2648 -
2649 2649  = **Printer** =
2650 2650  
2651 2651  == **TSPL label printer** ==