Changes for page 12 PLC Protocol OLD

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 16 added, 0 removed)
  • image-20220829151746-1.png
  • image-20220829151848-2.png
  • image-20220829152016-3.png
  • image-20220829152042-4.png
  • image-20220829152102-5.png
  • image-20220829152327-6.png
  • image-20220829152610-7.png
  • image-20220829155452-1.png
  • image-20220829162116-2.png
  • image-20220830094600-1.png
  • image-20220830094657-2.png
  • image-20220830094929-1.png
  • image-20220830095131-1.png
  • image-20220830140537-1.png
  • image-20220830140629-2.png
  • image-20220830141138-1.png

Details

Page properties

Content

...	...	@@ -87,6 +87,7 @@
87	87
88	88	= Create communication with WECON PLC =
89	89
	90	+== **LX3V Serial Protocol** ==
90	90
91	91	Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
92	92
...	...	@@ -140,7 +140,8 @@
140	140
141	141	[[https:~~/~~/drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing>>url:https://drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing]]
142	142
143		-== HMI settings ==
	144	+(% class="wikigeneratedid" id="HHMIsettings" %)
	145	+**HMI settings**
144	144
145	145	**Download PIStudio Software**
146	146
...	...	@@ -229,7 +229,8 @@
229	229	* HMI setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/>>https://docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/]]
230	230	* PLC setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/>>https://docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/]]
231	231
232		-== PLC settings ==
	234	+(% class="wikigeneratedid" id="HPLCsettings" %)
	235	+**PLC settings**
233	233
234	234	**Download PLC Software**
235	235
...	...	@@ -314,12 +314,8 @@
314	314	(% style="text-align:center" %)
315	315	[[image:image-20220819105928-9.png||height="229" width="669"]]
316	316
317		-= **WECON PLC** =
	320	+== **LX5V Serial Protocol** ==
318	318
319		-
320		-
321		-== **HMI and Wecon LX5V serial communication** ==
322		-
323	323	This example introduces the establishment of serial port communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
324	324
325	325	**Software configuration of PLC**
...	...	@@ -396,11 +396,10 @@
396	396
397	397	The above are all the steps for establishing serial port communication between Wecon HMI with LX5V PLC.
398	398
399		-== **HMI and Wecon LX5V-N Ethernet communication** ==
	398	+== **LX5V-N Ethernet protocol** ==
400	400
401	401	(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
402	402
403		-
404	404	**Software configuration of PLC**
405	405
406	406	**1）PLC programming software**
...	...	@@ -470,12 +470,51 @@
470	470
471	471	The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
472	472
473		-= =
	471	+= Create communication with **Rockwell PLC** =
474	474
475		-= **Allen-Bradley** =
	473	+== **MicroLogix Protocol** ==
476	476
477		-== **FreeTag Ethernet/IP (CompactLogix)** ==
	475	+MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
478	478
	477	+**HMI Settings**
	478	+
	479	+(% class="table-bordered" %)
	480	+|**Item**|**Settings**|**Note**
	481	+|Protocol|Allen-Bradlley MicroLogix|
	482	+|Connection|RS232|
	483	+|Baud rate|19200|
	484	+|Data bit|8|
	485	+|Parity|None|
	486	+|Stop bit|1|
	487	+|PLC station No.|1|
	488	+
	489	+**Address List**
	490	+
	491	+(% class="table-bordered" %)
	492	+|**Type**|**Device registers**|**Format**|**Range**|**Note**
	493	+|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
	494	+|O|O d.d|0.0~~255.15|
	495	+|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	496	+|S|S d.d|0.0~~255.15|
	497	+|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	498	+|(% rowspan="9" %)Word|S|S d|0~~255|
	499	+|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
	500	+|TP|TP nnhh|0~~ffff
	501	+|CS|CS nnhh|0~~ffff
	502	+|CP|CP nnhh|0~~ffff
	503	+|N|N nnhh|0~~ffff
	504	+|C|C nnhh|0~~ffff
	505	+|T|T nnhh|0~~ffff
	506	+|R|R nnhh|0~~ffff
	507	+
	508	+**Cable Wiring**
	509	+
	510	+
	511	+(% style="text-align:center" %)
	512	+[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
	513	+
	514	+== **CompactLogix FreeTag Ethernet protocol** ==
	515	+
479	479	Allen-Brandly CompactLogix
480	480
481	481	**HMI Settings**
...	...	@@ -531,48 +531,8 @@
531	531	(% style="text-align:center" %)
532	532	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
533	533
534		-== **MicroLogix** ==
	571	+== **MicroLogix 1200** ** protocol** ==
535	535
536		-MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
537		-
538		-**HMI Settings**
539		-
540		-(% class="table-bordered" %)
541		-|**Item**|**Settings**|**Note**
542		-|Protocol|Allen-Bradlley MicroLogix|
543		-|Connection|RS232|
544		-|Baud rate|19200|
545		-|Data bit|8|
546		-|Parity|None|
547		-|Stop bit|1|
548		-|PLC station No.|1|
549		-
550		-**Address List**
551		-
552		-(% class="table-bordered" %)
553		-|**Type**|**Device registers**|**Format**|**Range**|**Note**
554		-|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
555		-|O|O d.d|0.0~~255.15|
556		-|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
557		-|S|S d.d|0.0~~255.15|
558		-|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
559		-|(% rowspan="9" %)Word|S|S d|0~~255|
560		-|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
561		-|TP|TP nnhh|0~~ffff
562		-|CS|CS nnhh|0~~ffff
563		-|CP|CP nnhh|0~~ffff
564		-|N|N nnhh|0~~ffff
565		-|C|C nnhh|0~~ffff
566		-|T|T nnhh|0~~ffff
567		-|R|R nnhh|0~~ffff
568		-
569		-**Cable Wiring**
570		-
571		-(% style="text-align:center" %)
572		-[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
573		-
574		-== **AB PLC address edit** ==
575		-
576	576	The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
577	577
578	578	* **Bit address I:** The address ranges from 0.0 to 255.15. The value of the data before the decimal point ranges from 0 to 255 (decimal). The value from 0 to 15 after the decimal point is the sub address (decimal).
...	...	@@ -588,117 +588,280 @@
588	588	|(% style="width:393px" %)B|(% style="width:350px" %)fff.dd|(% style="width:333px" %)B 000.0 ~~ fff.15
589	589	|(% style="width:393px" %)S|(% style="width:350px" %)dd.dd|(% style="width:333px" %)S 0.0 ~~ 255.15
590	590	|(% style="width:393px" %)N|(% style="width:350px" %)ffff.dd|(% style="width:333px" %)N 000.0 ~~ fff.15
591		-|(% style="width:393px" %)**PLC word address type**|(% style="width:350px" %)**Address format**|(% style="width:333px" %)**Address range**
592		-|(% style="width:393px" %)S|(% style="width:350px" %)ddd|(% style="width:333px" %)S0 ~~ 255
593		-|(% style="width:393px" %)TS|(% style="width:350px" %)ffff|(% style="width:333px" %)TS0 ~~ FFFF
594		-|(% style="width:393px" %)TP|(% style="width:350px" %)ffff|(% style="width:333px" %)TP0 ~~ FFFF
595		-|(% style="width:393px" %)CS|(% style="width:350px" %)ffff|(% style="width:333px" %)CS0 ~~ FFFF
596		-|(% style="width:393px" %)CP|(% style="width:350px" %)ffff|(% style="width:333px" %)CP0 ~~ FFFF
597		-|(% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF
598		-|(% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF
	588	+|**PLC word address type**|**Address format**|**Address range**
	589	+|S|ddd|S0 ~~ 255
	590	+|TS|ffff|TS0 ~~ FFFF
	591	+|TP|ffff|TP0 ~~ FFFF
	592	+|CS|ffff|CS0 ~~ FFFF
	593	+|CP|ffff|CP0 ~~ FFFF
	594	+|N|ffff|N0 ~~ FFFF
	595	+|F|ffff|F0 ~~ FFFF
599	599
600		-= **Barcode Scanner** =
	597	+= Create communication with (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens PLC** =
601	601
602		-Supported: DELI 14880 barcode scanner
	599	+== **S7-200 Smart Ethernet Protocol** ==
603	603
	601	+Supported Series: Siemens S7-200 SMART Series Ethernet Module.
	602	+
	603	+Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
	604	+
604	604	**HMI Setting**
605	605
606	606	(% class="table-bordered" %)
607	607	|**Items**|**Settings**|**Note**
608		-|Protocol|Barcode Scanner|
609		-|Connection|USB|
	609	+|Protocol|Simens S7-200 Smart Ethernet|
	610	+|Connection|Ethernet|
	611	+|Port No.|102|
	612	+|PLC station No.|2|
610	610
611		-**Operating Procedures**
	614	+**Address List**
612	612
613		-Select [Barcode Scanner];
	616	+(% class="table-bordered" %)
	617	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	618	+|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	619	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	620	+|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
	621	+|V|V|V ddddd.o|0.0~~99999.7|
	622	+|M|M|M ddddd.o|0.0~~99999.7|
	623	+|SM|SM|ddddd.o|0.0~~99999.7|
	624	+|S|S|ddddd.o|0.0~~99999.7|Read only
	625	+|T|T|ddddd|0~~99999|Timer state, read only
	626	+|C|C|ddddd|0~~99999|Counter state, read only
	627	+|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
	628	+|Q|QW|QW ddddd|0~~99999|
	629	+|AI|AIW|AIW ddddd|0~~99999|
	630	+|AQ|VB|VB ddddd|0~~99999|
	631	+|V|VW|VW ddddd|0~~99998|(((
	632	+VW0=VB (0~~1)
614	614
	634	+VW2=VB (2~~3)
	635	+
	636	+Address value is a multiple of 2
	637	+)))
	638	+|V|VD|VD ddddd|0~~99998|(((
	639	+VD0=VB (0~~3)
	640	+
	641	+VD2=VB (4~~7)
	642	+
	643	+Address value is a multiple of 4
	644	+)))
	645	+|M|MB|MB ddddd|0~~99999|
	646	+|M|MW|MW ddddd|0~~99999|(((
	647	+MW0=MB(0~~1)
	648	+
	649	+MW2=MB(2~~3)
	650	+
	651	+Address value is a multiple of 2
	652	+)))
	653	+|M|MD|MD ddddd|0~~99999|(((
	654	+MD0=MB(0~~3)
	655	+
	656	+MD4=MB(4~~7)
	657	+
	658	+Address value is a multiple of 4
	659	+)))
	660	+|T|TW|TW ddddd|0~~99999|Value of timer
	661	+|C|CW|CW ddddd|0~~99999|Value of counter
	662	+|W|SW|SW ddddd|0~~99999|
	663	+
	664	+**Communication Settings**
	665	+
	666	+Enable HMI Ethernet in [Project Settings];
	667	+
615	615	(% style="text-align:center" %)
616		-[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	669	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
617	617
618		-Set address for receiving;
	671	+Set PLC IP in [Device IP] settings;
619	619
620		-Set correct length;
	673	+(% style="text-align:center" %)
	674	+[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
621	621
	676	+* PLC IP Address: PLC IP
	677	+* PLC pot No.: 102(fixed)
	678	+* Network:TCP_Client_2N(fixed)
	679	+
622	622	(% style="text-align:center" %)
623		-[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	681	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
624	624
625		-**✎Note:**
	683	+* Wait timeout: depend on actual network situation (more than 1500 ms)
626	626
627		-* The protocol uploads the information acquired by the USB scanner to the HMI;
628		-* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
629		-* Recommended model: DELI 14880 barcode scanner;
	685	+**Cable Wiring**
630	630
631		-= **Hitachi EHV Series (Ethernet)** =
	687	+(% style="text-align:center" %)
	688	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
632	632
633		-Supported series: Hitachi EHV series
	690	+== **S7-300 Ethernet Protocol** ==
634	634
635		-**HMI Settings**
	692	+Supported Series: Siemens S7-300 series PLC
636	636
	694	+**HMI Setting**
	695	+
637	637	(% class="table-bordered" %)
638	638	|**Items**|**Settings**|**Note**
639		-|Protocol|Hitachi EHV series|
	698	+|Protocol|Simens S7-300 Ethernet|
640	640	|Connection|Ethernet|
641		-|Port No.|3004~~3007|
	700	+|Port No.|102|
	701	+|PLC station No.|2|Need to be same as the PLC setting
642	642
643	643	**Address List**
644	644
645	645	(% class="table-bordered" %)
646		-|**Type**|**Register**|**Range**|**Format**|**Note**
647		-|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
648		-|M|0 - 7FFF.f (Hex)|M HHHH.h|
649		-|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
650		-H1H2H3H4 Module main number
	706	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	707	+|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	708	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	709	+|M|M|M ddddd.o|0.0~~99999.7|
	710	+|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
	711	+nn: block number;
651	651
652		-H1: Remote number
	713	+dddd: address;
	714	+)))
	715	+|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
	716	+|Q|QW|QW ddddd|0~~99999|
	717	+|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
	718	+|MW|MW ddddd|0~~99999|(((
	719	+MW0=MB(0~~1)
653	653
654		-H2: Unit number
	721	+MW2=MB(2~~3)
655	655
656		-H3: Slot number
	723	+Address value is a multiple of 2
	724	+)))
	725	+|MD|MD ddddd|0~~99999|(((
	726	+MD0=MB(0~~3)
657	657
658		-H4: Word number of Module
	728	+MD4=MB(4~~7)
659	659
660		-H Sub number of Module
	730	+Address value is a multiple of 4
	731	+)))
	732	+|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
	733	+nn: block number;
661	661
662		-For example:X21.3
	735	+dddd: address
	736	+)))
	737	+|DBxDBW|DBxDBW nndddd|0~~99999999
	738	+|DBxDBD|DBxDBD nndddd|0~~99999999
663	663
664		-Slot number 2
	740	+**Communication Settings**
665	665
666		-Word number of module is 1
	742	+Enable HMI Ethernet in [Project Settings];
667	667
668		-Bit number of module is 3
	744	+(% style="text-align:center" %)
	745	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
669	669
670		-Remote number and unit number are 0
	747	+Set PLC IP in [Device IP] settings;
	748	+
	749	+(% style="text-align:center" %)
	750	+[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
	751	+
	752	+* PLC IP Address: PLC IP
	753	+* PLC pot No.: 102(fixed)
	754	+* Network:TCP_Client_2N(fixed)
	755	+
	756	+(% style="text-align:center" %)
	757	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
	758	+
	759	+* Wait timeout: depend on actual network situation (more than 1500 ms)
	760	+
	761	+**Cable Wiring**
	762	+
	763	+(% style="text-align:center" %)
	764	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	765	+
	766	+== **S7-1200 Ethernet Protocol** ==
	767	+
	768	+Supported Series: Siemens S7-1200
	769	+
	770	+**HMI Setting**
	771	+
	772	+(% class="table-bordered" %)
	773	+|**Items**|**Settings**|**Note**
	774	+|Protocol|Siemens S7-1200|
	775	+|Connection|Ethernet|
	776	+|Port No.|102|
	777	+|PLC station No.|2|
	778	+
	779	+**Address List**
	780	+
	781	+(% class="table-bordered" %)
	782	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	783	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	784	+d:0~-~-9999
	785	+
	786	+o:0-7
	787	+)))|
	788	+|Q|Q|Q d.o|(((
	789	+d:0~-~-9999
	790	+
	791	+o:0-7
	792	+)))|
	793	+|M|M|M d.o|(((
	794	+d:0~-~-9999
	795	+
	796	+o:0-7
	797	+)))|
	798	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	799	+nn:0-9999,
	800	+
	801	+dddd:0-9999,
	802	+
	803	+o:0-7
	804	+)))|(((
	805	+nn:DB No.
	806	+
	807	+dddd:address value
	808	+
	809	+o: digit address
671	671	)))
672		-|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
673		-|R|0 – FF.f (Hex)|R HH.h|
674		-|L|0 - 73FF.f (Hex)|L HHHH.h|
675		-|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
676		-|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
677		-H1H2H3H4 Module main number
	811	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	812	+|M|MW|MW d|d:0-99999|(((
	813	+MW0=MB(0~~1)
678	678
679		-H1: Remote number
	815	+MW2=MB(2~~3)
680	680
681		-H2: Unit number
	817	+Address value is a multiple of 2
	818	+)))
	819	+|M|MD|MD d|d:0-99999|(((
	820	+MD0=MB(0~~3)
682	682
683		-H3: Slot number
	822	+MD4=MB(4~~7)
684	684
685		-H4: Word number of module
	824	+Address value is a multiple of 4
	825	+)))
	826	+|I|IW|IW d|d:0-99999|
	827	+|Q|QW|QW d|d:0-99999|
	828	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	829	+nn:0-9999
686	686
687		-For example:WX21
	831	+dddd:0-9999
	832	+)))|(((
	833	+nn:DB No.
688	688
689		-Word number of module is 1
	835	+dddd:address value
	836	+)))
	837	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	838	+nn:0-9999
690	690
691		-Slot number is 2
	840	+dddd:0-9999
	841	+)))|(((
	842	+nn:DB No.
692	692
693		-Remote number and unit number are 0
	844	+dddd:address value
	845	+
	846	+Address value is a multiple of 2
694	694	)))
695		-|WY|0 – FFFF (Hex)|WY H1H2H3H4
696		-|WR|0 – FFFF (Hex)|WR HHHH|
697		-|WL|0 - 73FF (Hex)|WL HHHH|
698		-|TC|0 - 2559|TC DDDD|
	848	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	849	+nn:0-9999
699	699
700		-**Communication settings in HMI**
	851	+dddd:0-9999
	852	+)))|(((
	853	+nn:DB No.
701	701
	855	+dddd:address value
	856	+
	857	+Address value is a multiple of 4
	858	+)))
	859	+
	860	+**Communication Settings**
	861	+
702	702	Enable HMI Ethernet in [Project Settings];
703	703
704	704	(% style="text-align:center" %)
...	...	@@ -707,180 +707,286 @@
707	707	Set PLC IP in [Device IP] settings;
708	708
709	709	(% style="text-align:center" %)
710		-[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	870	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
711	711
712		-**PLC Configuration**
	872	+**✎Note:**
713	713
714		-Connect with PLC, select[Online mode];
	874	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	875	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
715	715
716		-(% style="text-align:center" %)
717		-[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	877	+**PLC Settings**
718	718
719		-Set IP address, it is the same LAN parameters with HMI;
	879	+Add BD
720	720
	881	+* Please uncheck [Symbolic access only] option;
	882	+
721	721	(% style="text-align:center" %)
722		-[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	884	+[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
723	723
724		-3) Save PLC communication parameter, and restart PLC
	886	+Address settings, using BD2 as example.
725	725
726		-**PLC Monitor Mode**
	888	+* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	889	+* 2 represent DB block number
	890	+* xxxx represent address
727	727
728		-Connect with PLC and choose to “online” mode
	892	+**Such as:**
729	729
	894	+* DBxDBB20000 = DB2.DBB0
	895	+* DBxDBW20004 = DB2.DBW4
	896	+
730	730	(% style="text-align:center" %)
731		-[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	898	+[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
732	732
733		-Open I/O monitor sheet1
	900	+**How to connect with S7-1200 Firmware V4.0**
734	734
735		-(% style="text-align:center" %)
736		-[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	902	+PLC configuration
737	737
738		-During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	904	+* Double click [device configuration] in Siemens via software
	905	+* Double click [protection] to enter protection configuration screen
739	739
740	740	(% style="text-align:center" %)
741		-[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	908	+[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
742	742
743		-Enter the register address, click OK to view the value of the register.
	910	+* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
744	744
745	745	(% style="text-align:center" %)
746		-[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	913	+[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
747	747
748		-(% style="text-align:center" %)
749		-[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	915	+DB settings
750	750
751		-**✎Note:**
	917	+* Right click [DB], select [properties]
	918	+* Uncheck [optimized block access]
752	752
753		-* Both word registers and bit registers support even continuous read/write functions;
754		-* The range of registers is based on the specific PLC type;
755		-
756	756	**Cable Wiring**
757	757
758	758	(% style="text-align:center" %)
759	759	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
760	760
761		-= **IEC60870-5 104 Client** =
	925	+== **S7-XXX Ethernet Protocol** ==
762	762
	927	+Supported Series: Siemens S7-400, S7-1200 and S7-1500
	928	+
763	763	**HMI Setting**
764	764
765		-(% class="table-bordered" %)
766		-|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
767		-|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
768		-|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
769		-|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	931	+(% class="table-bordered" style="width:823px" %)
	932	+|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
	933	+|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
	934	+|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
	935	+|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
	936	+|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
	937	+|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
770	770
	939	+Slot from TIA Portal is equal to Device No. of PIStudio
	940	+
	941	+Rack from TIA Portal is equal to HMI No. of PIStudio
	942	+
	943	+(% style="text-align:center" %)
	944	+[[image:S7-XXXCommunication Settings.png]]
	945	+
	946	+(% style="text-align:center" %)
	947	+[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
	948	+
771	771	**Address List**
772	772
773	773	(% class="table-bordered" %)
774		-|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
775		-|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
776		-|(% style="width:461px" %)SCNA|0~~16777215.7
777		-|(% style="width:461px" %)DPTB|0~~16777215.7
778		-|(% style="width:461px" %)DCNA|0~~16777215.7
779		-|(% style="width:461px" %)METF|0~~16777215.7
780		-|(% style="width:461px" %)SENC|0~~16777215.7
781		-|(% style="width:461px" %)SENA|0~~16777215.7
782		-|(% style="width:461px" %)MENA|0~~16777215.7
783		-|(% style="width:461px" %)METD|0~~16777215.7
784		-|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
785		-|(% style="width:461px" %)SCNA|0~~16777215
786		-|(% style="width:461px" %)DPTB|0~~16777215
787		-|(% style="width:461px" %)DCNA|0~~16777215
788		-|(% style="width:461px" %)SENA|0~~16777215
789		-|(% style="width:461px" %)MENA|0~~16777215
790		-|(% style="width:461px" %)METD|0~~16777215
791		-|(% style="width:461px" %)INRO|0~~16777215
792		-|(% style="width:461px" %)TIMESYN|0~~16777215
793		-|(% style="width:461px" %)TIMEZ|0~~16777215
794		-|(% style="width:461px" %)NTP|0~~16777215
795		-|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
796		-|(% style="width:461px" %)SENC|0~~16777215
	952	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	953	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	954	+d:0~-~-9999
797	797
798		-**Address Configuration**
	956	+o:0-7
	957	+)))|
	958	+|Q|Q|Q d.o|(((
	959	+d:0~-~-9999
799	799
800		-The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	961	+o:0-7
	962	+)))|
	963	+|M|M|M d.o|(((
	964	+d:0~-~-9999
801	801
802		-(% style="text-align:center" %)
803		-[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	966	+o:0-7
	967	+)))|
	968	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	969	+nn:0-9999,
804	804
805		-(% style="text-align:center" %)
806		-[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	971	+dddd:0-9999,
807	807
808		-Extended tag name
	973	+o:0-7
	974	+)))|(((
	975	+nn:DB No.
809	809
810		-Address range for the extended tag.
	977	+dddd:address value
811	811
	979	+o: digit address
	980	+)))
	981	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	982	+|M|MW|MW d|d:0-99999|(((
	983	+MW0=MB(0~~1)
	984	+
	985	+MW2=MB(2~~3)
	986	+
	987	+Address value is a multiple of 2
	988	+)))
	989	+|M|MD|MD d|d:0-99999|(((
	990	+MD0=MB(0~~3)
	991	+
	992	+MD4=MB(4~~7)
	993	+
	994	+Address value is a multiple of 4
	995	+)))
	996	+|I|IW|IW d|d:0-99999|
	997	+|Q|QW|QW d|d:0-99999|
	998	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	999	+nn:0-9999
	1000	+
	1001	+dddd:0-9999
	1002	+)))|(((
	1003	+nn:DB No.
	1004	+
	1005	+dddd:address value
	1006	+)))
	1007	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	1008	+nn:0-9999
	1009	+
	1010	+dddd:0-9999
	1011	+)))|(((
	1012	+nn:DB No.
	1013	+
	1014	+dddd:address value
	1015	+
	1016	+Address value is a multiple of 2
	1017	+)))
	1018	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	1019	+nn:0-9999
	1020	+
	1021	+dddd:0-9999
	1022	+)))|(((
	1023	+nn:DB No.
	1024	+
	1025	+dddd:address value
	1026	+
	1027	+Address value is a multiple of 4
	1028	+)))
	1029	+
812	812	**Communication Settings**
813	813
814	814	Enable HMI Ethernet in [Project Settings];
815	815
816	816	(% style="text-align:center" %)
817		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1035	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
818	818
819	819	Set PLC IP in [Device IP] settings;
820	820
821	821	(% style="text-align:center" %)
822		-[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	1040	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
823	823
	1042	+**✎Note:**
	1043	+
	1044	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	1045	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	1046	+
824	824	**Cable Wiring**
825	825
826		-(% style="text-align:center" %)
827		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1049	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
828	828
829		-= **LG XGK FEnet Ethernet** =
	1051	+== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet Protocol** ==
830	830
831		-Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	1053	+Supported Series: Siemens Logo 0BA0 series
832	832
833	833	**HMI Settings**
834	834
835	835	(% class="table-bordered" %)
836	836	|**Items**|**Settings**|**Note**
837		-|Protocol|LG XGK FEnet(Ethernet)|
	1059	+|Protocol|Siemens LOGO|
838	838	|Connection|Ethernet|
839		-|Port No.|2004|
	1061	+|Port No.|102|
	1062	+|PLC station No.|2|
840	840
841	841	**Address List**
842	842
843	843	(% class="table-bordered" %)
844		-|**Type**|**Register**|**Range**|**Format**|**Note**
845		-|(% rowspan="14" %)Word|P|0~~2047|P d|
846		-|M|0~~2047|M d|
847		-|K|0~~2047|K d|
848		-|F|0~~2047|F d|
849		-|T|0~~2047|T d|
850		-|C|0~~2047|C d|
851		-|Z|0~~127|Z d|
852		-|S|0~~127|S d|
853		-|L|0~~11263|L d|
854		-|N|0~~21503|N d|
855		-|D|0~~32767|D d|
856		-|R|0~~32767|R d|
857		-|ZR|0~~65535|ZR d|
858		-|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	1067	+|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
	1068	+|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
	1069	+|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
	1070	+|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
	1071	+|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
	1072	+|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
	1073	+|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
	1074	+|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
	1075	+|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
	1076	+|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
	1077	+|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
	1078	+|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
	1079	+|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
	1080	+|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
	1081	+|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
	1082	+|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
859	859
860		-**✎Note:**
	1084	+**PLC Settings in LOGO Software:**
861	861
862		-* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
863		-* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
864		-* All bit registers are in the form of bits in word, and the range is the same as the word register;
	1086	+Click [Tools]~-~-[Ethernet Connections],shown as below.
865	865
866		-**Communication settings in HMI**
	1088	+(% style="text-align:center" %)
	1089	+[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
867	867
868		-Enable HMI Ethernet in [Project Settings];
	1091	+Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
869	869
870	870	(% style="text-align:center" %)
871		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1094	+[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
872	872
	1096	+**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
	1097	+
	1098	+(% style="text-align:center" %)
	1099	+[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
	1100	+
	1101	+**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	1102	+
	1103	+(% style="text-align:center" %)
	1104	+[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
	1105	+
	1106	+
	1107	+(% style="text-align:center" %)
	1108	+[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
	1109	+
	1110	+
	1111	+**HMI Communication Settings**
	1112	+
873	873	Set PLC IP in [Device IP] settings;
874	874
875	875	(% style="text-align:center" %)
876		-[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	1116	+[[image:SiemensLOGODeviceIP.png]]
877	877
	1118	+Enable HMI Ethernet in [Project Settings];
	1119	+
	1120	+(% style="text-align:center" %)
	1121	+[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
	1122	+
	1123	+TSAP setting
	1124	+
	1125	+* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
	1126	+* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
	1127	+* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
	1128	+
	1129	+**✎Note:**
	1130	+
	1131	+* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
	1132	+
	1133	+(% style="text-align:center" %)
	1134	+[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
	1135	+
	1136	+
	1137	+* AI word address and Ibit address are read-only and cannot be written on HMI.
	1138	+* VW address should be even number.such as VW0, VW2, VW4...
	1139	+* VD address it takes two VW addresses.such as VD0,VD4,VD8...
	1140	+* Written value of RTC cannot exceed 255.
	1141	+
878	878	**Cable Wiring**
879	879
880		-= **Mitsubishi** =
	1144	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
881	881
882		-== **FX1S, 1N, 2N Series** ==
	1146	+= Create communication with **Mitsubishi PLC** =
883	883
	1148	+== **FX1S, 1N, 2N Series Protocol** ==
	1149	+
884	884	Supported Series: Mitsubishi FX1S, FX1N, FX2N series
885	885
886	886	**HMI Settings**
...	...	@@ -932,7 +932,7 @@
932	932
933	933	**✎Note:** COM3 only available in PI8000/PI9000 series.
934	934
935		-== **FX5U Ethernet** ==
	1201	+== **FX5U Ethernet Protocol** ==
936	936
937	937	Mitsubishi FX5U series PLC
938	938
...	...	@@ -1011,7 +1011,7 @@
1011	1011	(% style="text-align:center" %)
1012	1012	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1013	1013
1014		-== **FX5U Serial Port** ==
	1280	+== **FX5U Serial Port Protocol** ==
1015	1015
1016	1016	Mitsubishi FX5U series PLC
1017	1017
...	...	@@ -1103,7 +1103,7 @@
1103	1103
1104	1104	**✎Note:** COM3 only available in PI8000/PI9000 series.
1105	1105
1106		-== **L02 MELSEC (Ethernet)** ==
	1372	+== **L02 MELSEC (Ethernet) Protocol** ==
1107	1107
1108	1108	Mitsubishi Q series CPU built-in Ethernet port.
1109	1109
...	...	@@ -1188,7 +1188,7 @@
1188	1188	(% style="text-align:center" %)
1189	1189	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1190	1190
1191		-== **QJ71E71 MELSEC** ==
	1457	+== **QJ71E71 MELSEC Protocol** ==
1192	1192
1193	1193	Mitsubishi QJ71E71 Ethernet communication module;
1194	1194
...	...	@@ -1268,219 +1268,200 @@
1268	1268	(% style="text-align:center" %)
1269	1269	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1270	1270
1271		-= **MODBUS** =
	1537	+= Create communication with **Delta PLC** =
1272	1272
1273		-== **MODBUS RTU Master** ==
	1539	+== **DVP serial protocol** ==
1274	1274
1275		-Supported Series: MODBUS RTU CONTROLLER
	1541	+(% class="wikigeneratedid" %)
	1542	+Supported Series: Delta DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX Controller
1276	1276
1277		-HMI works as MODBUS SLAVE connecting with MASTER
	1544	+**1）HMI Settings**
1278	1278
1279		-(% style="text-align:center" %)
1280		-[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1546	+|**Item**|**Settings**|**Note**
	1547	+|Protocol|DELTA DVP Series|
	1548	+|Connection|RS485|
	1549	+|Baud rate|9600|
	1550	+|Data bit|7|
	1551	+|Parity|Even|
	1552	+|Stop bit|1|
	1553	+|PLC station No.|1~~255|Need to be the same as PLC settings
1281	1281
	1555	+**2）Address List**
1282	1282
1283		-(% style="text-align:center" %)
1284		-[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1557	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1558	+|Bit|X|X|X d|0~~303237|
	1559	+|Bit|Y|Y|Y d|0~~303237|
	1560	+|Bit|M|M|M d|0~~99999|
	1561	+|Bit|T|T|T d|0~~99999|
	1562	+|Bit|C|C|T d|0~~99999|
	1563	+|Bit|S|S|T d|0~~99999|
	1564	+|Word|D|D|D d|0~~99999|
	1565	+|Word|T|T|T d|0~~99999|
	1566	+|Word|C|C|C d|0~~99999|
1285	1285
	1568	+(% class="wikigeneratedid" %)
	1569	+**3）Configure the communication protocol**
1286	1286
1287		-(% style="text-align:center" %)
1288		-[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1571	+(% class="wikigeneratedid" %)
	1572	+[[image:image-20220829152327-6.png]]
1289	1289
1290		-**HMI Settings**
	1574	+(% class="wikigeneratedid" %)
	1575	+[[image:image-20220829152016-3.png]]
1291	1291
1292		-(% class="table-bordered" %)
1293		-|**Items**|**Settings**|**Note**
1294		-|Protocol|MODBUS RTU Master|
1295		-|Connection|RS485/RS232|
1296		-|Baud rate|2400~~187500|
1297		-|Data bit|8|
1298		-|Parity|Even/ Odd/ None|
1299		-|Stop bit|1/2|
1300		-|Station No.|0~~255|
	1577	+(% class="wikigeneratedid" %)
	1578	+**4）Cable Wiring**
1301	1301
1302		-**Address List**
	1580	+(% class="wikigeneratedid" id="H" %)
	1581	+[[image:image-20220829152610-7.png]]
1303	1303
1304		-(% class="table-bordered" %)
1305		-|**Type**|**HMI address**|**MODBUS code**|**Range**
1306		-|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
1307		-|Word|HDW3500~~HDW7999|4|0~~4499
	1583	+(% class="wikigeneratedid" id="H" %)
	1584	+[[image:image-20220829152102-5.png]]
1308	1308
1309		-**Cable Wiring**
1310	1310
1311		-* **RS485**
	1587	+== **DVP Ethernet Protocol** ==
1312	1312
1313		-(% style="text-align:center" %)
1314		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1589	+(% class="wikigeneratedid" %)
	1590	+Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
1315	1315
1316		-(% style="text-align:center" %)
1317		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1592	+**1）HMI Settings**
1318	1318
1319		-* **RS232**
	1594	+|**Items**|**Settings**|**Note**
	1595	+|Protocol|DELTA DVP Modbus TCP|
	1596	+|Connection|Ethernet|
	1597	+|Port No.|201|Must be the same as the PLC setting
	1598	+|PLC station No.|0|Must be the same as the PLC setting
1320	1320
1321		-(% style="text-align:center" %)
1322		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	1600	+**2）Address List**
1323	1323
1324		-**✎Note:** COM3 only available in PI8000/PI9000 series.
	1602	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1603	+|Bit|X|X|X o|0~~377|
	1604	+|Bit|Y|Y|Y o|0~~377|
	1605	+|Bit|M0|M0|M0 d|0~~1535|
	1606	+|Bit|M1|M1|M1 d|1536~~4095|
	1607	+|Bit|T|T|T d|0~~255|
	1608	+|Bit|C|C|C d|0~~255|
	1609	+|Bit|S|S|S d|0~~1023|
	1610	+|Word|D0|D0|D0 d|0~~4095|
	1611	+|Word|D1|D1|D1 d|4096~~11999|(((
	1612	+
	1613	+)))
	1614	+|Word|T|T|T d|0~~255|
	1615	+|Word|C|C|C d|0~~199|(((
	1616	+
	1617	+)))
1325	1325
1326		-== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
	1619	+(% class="wikigeneratedid" %)
	1620	+**3）Configure the communication protocol**
1327	1327
1328		-Supported Series: MODBUS RTU CONTROLLER
	1622	+[[image:image-20220829155452-1.png]]
1329	1329
1330		-HMI works as MODBUS MASTER connecting with SLAVE.
	1624	+[[image:image-20220829162116-2.png]]
1331	1331
1332		-The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
	1626	+**4）Cable Wiring**
1333	1333
1334		-(% style="text-align:center" %)
1335		-[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1628	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1336	1336
	1630	+== **AS serial protocol** ==
1337	1337
1338		-(% style="text-align:center" %)
1339		-[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1632	+**1）HMI Settings**
1340	1340
1341		-
1342		-(% style="text-align:center" %)
1343		-[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1344		-
1345		-**HMI Settings**
1346		-
1347		-(% class="table-bordered" %)
1348		-|**Items**|**Settings**|**Note**
1349		-|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
1350		-|Connection|RS485/RS232|
1351		-|Baud rate|2400~~187500|
	1634	+|**Item**|**Settings**|**Note**
	1635	+|Protocol|DELTA AS300 MODBUS RTU|
	1636	+|Connection|RS485|
	1637	+|Baud rate|9600|
1352	1352	|Data bit|8|
1353		-|Parity|Even/ Odd/ None|
1354		-|Stop bit|1/2|
1355		-|PLC station No.|0~~255|
	1639	+|Parity|NONE|
	1640	+|Stop bit|1|
	1641	+|PLC station No.|1|
1356	1356
1357		-**Address List**
	1643	+**2）Address List**
1358	1358
1359		-(% class="table-bordered" %)
1360		-|**Type**|**Address Type**|**Function code & Description**
1361		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
1362		-|06 (write single register: write a binary value to a holding register)
1363		-|10 (write values to multiple addresses )
1364		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
1365		-|06 (write single register: write a binary value to a holding register)
1366		-|10 (write values to multiple addresses )
1367		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
1368		-|06 (write single register: write a binary value to a holding register)
1369		-|10 (write values to multiple addresses )
1370		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
1371		-|10 (write values to multiple addresses )
1372		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
1373		-|05 (Force a single coil to force the on/off state of a logic coil)
1374		-|0F (Write multiple bits, ie write continuously)
1375		-|(% rowspan="3" %)1|02 (Read the input state)
1376		-|05 (Force a single coil to force the on/off state of a logic coil)
1377		-|0F (Write multiple bits)
1378		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
1379		-|05 (Force a single coil to force the on/off state of a logic coil)
1380		-|0F (Write multiple bits)
1381		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1382		-|0F (Write multiple bits)
1383	1383
1384		-**✎Note:**
	1646	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1647	+|Bit|X|X|X d|0~~63|
	1648	+|Bit|Y|Y|Y d|0~~63|
	1649	+|Bit|D|D|D d|0~~29999|
	1650	+|Bit|M|M|M d|0~~8191|
	1651	+|Bit|SM|SM|SM d|0~~4095|
	1652	+|Bit|S|S|S h|0~~2047|
	1653	+|Bit|T|T|T d|0~~511|
	1654	+|Bit|C|C|C d|0~~511|
	1655	+|Bit|HC|HC|HC d|0~~255|
	1656	+|Word|X|X|X h|0~~63|
	1657	+|Word|Y|Y|Y d|0~~63|
	1658	+|Word|SR|SR|SR d|0~~2047|
	1659	+|Word|D|D|D d|0~~29999|
	1660	+|Word|T|T|T d|0~~511|
	1661	+|Word|C|C|C h|0~~511|
	1662	+|Word|E|E|E d|0~~9|
1385	1385
1386		-* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
1387		-* The function codes sent out are the same as those that read and write words.
	1664	+**3）Configure the communication protocol**
1388	1388
1389		-**Station number for more than one slaves**
	1666	+[[image:image-20220830094600-1.png]]
1390	1390
1391		-If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
	1668	+[[image:image-20220830094657-2.png]]
1392	1392
1393		-(% style="text-align:center" %)
1394		-[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
	1670	+**4）Cable Wiring**
1395	1395
1396		-**Cable Wiring**
	1672	+Figure
1397	1397
1398		-* **RS485**
	1674	+[[image:image-20220830141138-1.png]]
1399	1399
1400		-(% style="text-align:center" %)
1401		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1676	+Pin Definition Diagram
1402	1402
1403		-(% style="text-align:center" %)
1404		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1678	+[[image:image-20220830095131-1.png]]
1405	1405
1406		-* **RS232**
	1680	+== **AS Ethernet Protocol** ==
1407	1407
1408		-(% style="text-align:center" %)
1409		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	1682	+**1）HMI Settings**
1410	1410
1411		-**✎Note:** COM3 only available in PI8000/PI9000 series.
1412	1412
1413		-== **MODBUS TCP Slave (All function)** ==
1414		-
1415		-Supported series: MODBUS TCP controller
1416		-
1417		-HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
1418		-
1419		-(% style="text-align:center" %)
1420		-[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1421		-
1422		-(% style="text-align:center" %)
1423		-[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
1424		-
1425		-
1426		-(% style="text-align:center" %)
1427		-[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
1428		-
1429		-**HMI Setting**
1430		-
1431		-(% class="table-bordered" %)
1432		-|**Items**|**Settings**|**Note**
1433		-|Protocol|MODBUS TCP Slave (All function)|
	1685	+|=**Items**|=**Settings**|=**Note**
	1686	+|Protocol|DELTA AS300 MODBUS TCP|
1434	1434	|Connection|Ethernet|
1435	1435	|Port No.|502|
1436		-|PLC station No.|1|
	1689	+|Device No.|1|
	1690	+|HMI No.|0|
1437	1437
1438		-**Address List**
	1692	+**2）Address List**
1439	1439
1440		-(% class="table-bordered" %)
1441		-|**Type**|**Register**|**Function code & Description**
1442		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
1443		-|06 (write single register: write a binary value to a holding register)
1444		-|10 (write values to multiple addresses )
1445		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
1446		-|06 (write single register: write a binary value to a holding register)
1447		-|10 (write values to multiple addresses )
1448		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
1449		-|06 (write single register: write a binary value to a holding register)
1450		-|10 (write values to multiple addresses )
1451		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
1452		-|10 (write values to multiple addresses )
1453		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
1454		-|05 (Force a single coil to force the on/off state of a logic coil)
1455		-|0F (Write multiple bits, ie write continuously)
1456		-|(% rowspan="3" %)1|02 (Read the input state)
1457		-|05 (Force a single coil to force the on/off state of a logic coil)
1458		-|0F (Write multiple bits)
1459		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
1460		-|05 (Force a single coil to force the on/off state of a logic coil)
1461		-|0F (Write multiple bits)
1462		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1463		-|0F (Write multiple bits)
1464	1464
1465		-**Communication Settings**
	1695	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1696	+|Bit|X|X|X d|0~~63|
	1697	+|Bit|Y|Y|Y d|0~~63|
	1698	+|Bit|D|D|D d|0~~29999|
	1699	+|Bit|M|M|M d|0~~8191|
	1700	+|Bit|SM|SM|SM d|0~~4095|
	1701	+|Bit|S|S|S h|0~~2047|
	1702	+|Bit|T|T|T d|0~~511|
	1703	+|Bit|C|C|C d|0~~511|
	1704	+|Bit|HC|HC|HC d|0~~255|
	1705	+|Word|X|X|X h|0~~63|
	1706	+|Word|Y|Y|Y d|0~~63|
	1707	+|Word|SR|SR|SR d|0~~2047|
	1708	+|Word|D|D|D d|0~~29999|
	1709	+|Word|T|T|T d|0~~511|
	1710	+|Word|C|C|C h|0~~511|
	1711	+|Word|E|E|E d|0~~9|
1466	1466
1467		-Enable HMI Ethernet in [Project Settings];
	1713	+**3）Configure the communication protocol**
1468	1468
1469		-(% style="text-align:center" %)
1470		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1715	+[[image:image-20220830140537-1.png]]
1471	1471
1472		-Set PLC IP in [Device IP] settings;
	1717	+[[image:image-20220830140629-2.png]]
1473	1473
1474		-(% style="text-align:center" %)
1475		-[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	1719	+**4）Cable Wiring**
1476	1476
1477		-**Cable Wiring**
	1721	+Figure
1478	1478
1479		-(% style="text-align:center" %)
1480		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1723	+[[image:image-20220830094929-1.png]]
1481	1481
1482		-= **Omron** =
	1725	+Pin Definition Diagram
1483	1483
	1727	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1728	+
	1729	+= ** Omron** =
	1730	+
1484	1484	== **EC55** ==
1485	1485
1486	1486	Supported device: EC55 temperature instrument
...	...	@@ -1487,7 +1487,6 @@
1487	1487
1488	1488	**HMI Settings**
1489	1489
1490		-(% class="table-bordered" %)
1491	1491	|**Items**|**Settings**|**Note**
1492	1492	|Protocol|Omron EC55|
1493	1493	|Connection|RS485 (9600, 2, 7, EVEN)|
...	...	@@ -1496,7 +1496,6 @@
1496	1496
1497	1497	**Address List**
1498	1498
1499		-(% class="table-bordered" %)
1500	1500	|**Type**|**Register**|**Device range**|**HMI range**|**Function**
1501	1501	|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
1502	1502	|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
...	...	@@ -1542,7 +1542,7 @@
1542	1542	* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
1543	1543	* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
1544	1544	* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
1545		-* (% id="cke_bm_8690S" style="display:none" %)[[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]](%%)Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
	1790	+* [[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
1546	1546
1547	1547	== EtherNet/IP NX series ==
1548	1548
...	...	@@ -1550,7 +1550,6 @@
1550	1550
1551	1551	**HMI Setting**
1552	1552
1553		-(% class="table-bordered" %)
1554	1554	|**Items**|**Settings**|**Note**
1555	1555	|Protocol|Omron NX Ethernet/IP|
1556	1556	|Connection|Ethernet|
...	...	@@ -1602,183 +1602,224 @@
1602	1602	(% style="text-align:center" %)
1603	1603	[[image:12.PLC Protocol_html_437cb087b36b5784.png||data-xwiki-image-style-alignment="center" height="330" width="600" class="img-thumbnail"]]
1604	1604
1605		-
1606	1606	(% style="text-align:center" %)
1607	1607	[[image:12.PLC Protocol_html_60ef71528a99abf5.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
1608	1608
1609	1609	**Cable Wiring**
1610	1610
	1854	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1855	+
	1856	+= **MODBUS** =
	1857	+
	1858	+== **MODBUS RTU Master** ==
	1859	+
	1860	+Supported Series: MODBUS RTU CONTROLLER
	1861	+
	1862	+HMI works as MODBUS SLAVE connecting with MASTER
	1863	+
1611	1611	(% style="text-align:center" %)
1612		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1865	+[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1613	1613
1614		-= **OpenCAN** =
1615	1615
1616		-OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
	1868	+(% style="text-align:center" %)
	1869	+[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1617	1617
1618		-This protocol is only available in PI8000 series HMI.
1619	1619
	1872	+(% style="text-align:center" %)
	1873	+[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1874	+
1620	1620	**HMI Settings**
1621	1621
1622	1622	(% class="table-bordered" %)
1623	1623	|**Items**|**Settings**|**Note**
1624		-|Protocol|OPENCAN|
1625		-|Connection|CAN port|
1626		-|Baud rate|250000|
	1879	+|Protocol|MODBUS RTU Master|
	1880	+|Connection|RS485/RS232|
	1881	+|Baud rate|2400~~187500|
	1882	+|Data bit|8|
	1883	+|Parity|Even/ Odd/ None|
	1884	+|Stop bit|1/2|
	1885	+|Station No.|0~~255|
1627	1627
1628		-**CAN frame setting in HMI**
	1887	+**Address List**
1629	1629
1630		-Click [OpenCAN setting] button in communication setting window;
	1889	+(% class="table-bordered" %)
	1890	+|**Type**|**HMI address**|**MODBUS code**|**Range**
	1891	+|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
	1892	+|Word|HDW3500~~HDW7999|4|0~~4499
1631	1631
1632		-(% style="text-align:center" %)
1633		-[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
	1894	+**Cable Wiring**
1634	1634
1635		-Click [Add] to create a new frame;
	1896	+* **RS485**
1636	1636
1637	1637	(% style="text-align:center" %)
1638		-[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
	1899	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1639	1639
1640		-(% class="table-bordered" %)
1641		-|**No**|**Items**|**Description**
1642		-|1|Add|add a frame related to register address
1643		-|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
1644		-|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
1645		-|4|Modify|Modify the frames in frame management
1646		-|5|Copy|Copy one frame to another
1647		-|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
1648		-|7|Empty|All frames in the list are cleared
1649		-|8|Browse|Displays configuration files in XML format in IE
1650		-|9|OK|Complete the configuration of the frame and exit
	1901	+(% style="text-align:center" %)
	1902	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1651	1651
1652		-Set CANBUS frame in setting windows
	1904	+* **RS232**
1653	1653
1654	1654	(% style="text-align:center" %)
1655		-[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
	1907	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
1656	1656
1657		-(% class="table-bordered" %)
1658		-|**No**|(% style="width:185px" %)**Items**|(% style="width:854px" %)**Description**
1659		-|1|(% style="width:185px" %)ID|(% style="width:854px" %)Set the ID of a can frame in hexadecimal format;
1660		-|2|(% style="width:185px" %)ID assign|(% style="width:854px" %)split the ID by PF, PS, and SA;
1661		-|3|(% style="width:185px" %)Frame type|(% style="width:854px" %)Select Standard frame or Extended Frame;
1662		-|4|(% style="width:185px" %)Frame format|(% style="width:854px" %)Select between data frame and remote Frame;
1663		-|5|(% style="width:185px" %)Data|(% style="width:854px" %)Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
1664		-|6|(% style="width:185px" %)Use address|(% style="width:854px" %)(((
1665		-Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
	1909	+**✎Note:** COM3 only available in PI8000/PI9000 series.
1666	1666
1667		-**Edit:** Set a bit or word address by its format;
	1911	+== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
1668	1668
1669		-**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
1670		-)))
1671		-|(% rowspan="8" %)7|(% rowspan="8" style="width:185px" %)Data interactive configuration|(% style="width:854px" %)There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
1672		-|(% style="width:854px" %)Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
1673		-|(% style="width:854px" %)Feedback mode: feedback mode includes no response, confirm response and data response;
1674		-|(% style="width:854px" %)No response: the device or touch screen will not receive feedback;
1675		-|(% style="width:854px" %)Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
1676		-|(% style="width:854px" %)Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
1677		-|(% style="width:854px" %)response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
1678		-|(% style="width:854px" %)Response timeout: sets whether the response frame timeout;
1679		-|(% rowspan="3" %)8|(% rowspan="3" style="width:185px" %)Control address|(% style="width:854px" %)If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
1680		-|(% style="width:854px" %)Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
1681		-|(% style="width:854px" %)Manually send: a manually send tick indicates only one send;
1682		-|9|(% style="width:185px" %)Flag configuration|(% style="width:854px" %)Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
1683		-|10|(% style="width:185px" %)Note|(% style="width:854px" %)Fill the text to explain the meaning of the frame;
1684		-|11|(% style="width:185px" %)Data assign|(% style="width:854px" %)Preview the display in this table based on the address and the corresponding number of digits;
1685		-|12|(% style="width:185px" %)Current operation display|(% style="width:854px" %)Display the description of current operation;
1686		-|13|(% style="width:185px" %)Add|(% style="width:854px" %)Add a new frame;
1687		-|14|(% style="width:185px" %)Save frame|(% style="width:854px" %)Save the configured frame format;
1688		-|15|(% style="width:185px" %)Cancel|(% style="width:854px" %)Cancel the frame configuration;
	1913	+Supported Series: MODBUS RTU CONTROLLER
1689	1689
1690		-Set CAN address (Read or write operation);
	1915	+HMI works as MODBUS MASTER connecting with SLAVE.
1691	1691
	1917	+The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
	1918	+
1692	1692	(% style="text-align:center" %)
1693		-[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
	1920	+[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1694	1694
1695		-(% class="table-bordered" %)
1696		-|**No.**|(% style="width:207px" %)**Item**|(% style="width:829px" %)**Description**
1697		-|1|(% style="width:207px" %)Current address|(% style="width:829px" %)Displays the register type and register address set by the user in the data access interface
1698		-|(% rowspan="3" %)2|(% rowspan="3" style="width:207px" %)Trigger|(% style="width:829px" %)Two operations, "read" and "write," are based on on-screen registers
1699		-|(% style="width:829px" %)If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
1700		-|(% style="width:829px" %)If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
1701		-|(% rowspan="5" %)3|(% rowspan="3" style="width:207px" %)Data operation|(% style="width:829px" %)The read and write operations in the trigger conditions are set accordingly.
1702		-|(% style="width:829px" %)If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
1703		-|(% style="width:829px" %)If the trigger condition is a writing operation, there are two situations:(((
1704		-* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
1705		-* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
1706		-)))
1707		-|(% rowspan="2" style="width:207px" %)Position and length input format|(% style="width:829px" %)If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
1708		-|(% style="width:829px" %)If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
1709		-|4|(% style="width:207px" %)Add|(% style="width:829px" %)Add current configuration
1710		-|5|(% style="width:207px" %)Close|(% style="width:829px" %)Close the configuration window to exit
1711	1711
1712		-**Multiple Packages Settings**
	1923	+(% style="text-align:center" %)
	1924	+[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1713	1713
	1926	+
1714	1714	(% style="text-align:center" %)
1715		-[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
	1928	+[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1716	1716
1717		-Check [Multiple packages supported] to open [Multiple package data] window, as below show.
	1930	+**HMI Settings**
1718	1718
1719		-Select Multiple package type
	1932	+(% class="table-bordered" %)
	1933	+|**Items**|**Settings**|**Note**
	1934	+|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
	1935	+|Connection|RS485/RS232|
	1936	+|Baud rate|2400~~187500|
	1937	+|Data bit|8|
	1938	+|Parity|Even/ Odd/ None|
	1939	+|Stop bit|1/2|
	1940	+|PLC station No.|0~~255|
1720	1720
1721		-* Not Multiple packages
1722		-* J1939 Multiple packages
1723		-* Customized Multiple packages
	1942	+**Address List**
1724	1724
1725		-Click [Edit Receive data] for [Receive] settings
	1944	+(% class="table-bordered" %)
	1945	+|**Type**|**Address Type**|**Function code & Description**
	1946	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	1947	+|06 (write single register: write a binary value to a holding register)
	1948	+|10 (write values to multiple addresses )
	1949	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	1950	+|06 (write single register: write a binary value to a holding register)
	1951	+|10 (write values to multiple addresses )
	1952	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	1953	+|06 (write single register: write a binary value to a holding register)
	1954	+|10 (write values to multiple addresses )
	1955	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	1956	+|10 (write values to multiple addresses )
	1957	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	1958	+|05 (Force a single coil to force the on/off state of a logic coil)
	1959	+|0F (Write multiple bits, ie write continuously)
	1960	+|(% rowspan="3" %)1|02 (Read the input state)
	1961	+|05 (Force a single coil to force the on/off state of a logic coil)
	1962	+|0F (Write multiple bits)
	1963	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	1964	+|05 (Force a single coil to force the on/off state of a logic coil)
	1965	+|0F (Write multiple bits)
	1966	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	1967	+|0F (Write multiple bits)
1726	1726
1727		-* Start code+ Total length (J1939)
	1969	+**✎Note:**
1728	1728
1729		-(% style="text-align:center" %)
1730		-[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1971	+* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
	1972	+* The function codes sent out are the same as those that read and write words.
1731	1731
1732		-As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
	1974	+**Station number for more than one slaves**
1733	1733
1734		-* Start code + Data max length (J1939)
	1976	+If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
1735	1735
1736	1736	(% style="text-align:center" %)
1737		-[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1979	+[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
1738	1738
1739		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
	1981	+**Cable Wiring**
1740	1740
1741		-* Data max length (J1939)
	1983	+* **RS485**
1742	1742
1743	1743	(% style="text-align:center" %)
1744		-[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1986	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1745	1745
1746		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
	1988	+(% style="text-align:center" %)
	1989	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1747	1747
1748		-* Customized multiple package
	1991	+* **RS232**
1749	1749
1750	1750	(% style="text-align:center" %)
1751		-[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
	1994	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
1752	1752
1753		-As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
	1996	+**✎Note:** COM3 only available in PI8000/PI9000 series.
1754	1754
1755		-Click [Edit Send data] for [Send] setting
	1998	+== **MODBUS TCP Slave (All function)** ==
1756	1756
1757		-* J1939
	2000	+Supported series: MODBUS TCP controller
1758	1758
	2002	+HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
	2003	+
1759	1759	(% style="text-align:center" %)
1760		-[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
	2005	+[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1761	1761
1762		-[Data] is all data to be sent.
	2007	+(% style="text-align:center" %)
	2008	+[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
1763	1763
1764		-Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
1765	1765
1766		-* Customized multiple package
	2011	+(% style="text-align:center" %)
	2012	+[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
1767	1767
	2014	+**HMI Setting**
	2015	+
	2016	+(% class="table-bordered" %)
	2017	+|**Items**|**Settings**|**Note**
	2018	+|Protocol|MODBUS TCP Slave (All function)|
	2019	+|Connection|Ethernet|
	2020	+|Port No.|502|
	2021	+|PLC station No.|1|
	2022	+
	2023	+**Address List**
	2024	+
	2025	+(% class="table-bordered" %)
	2026	+|**Type**|**Register**|**Function code & Description**
	2027	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	2028	+|06 (write single register: write a binary value to a holding register)
	2029	+|10 (write values to multiple addresses )
	2030	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	2031	+|06 (write single register: write a binary value to a holding register)
	2032	+|10 (write values to multiple addresses )
	2033	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	2034	+|06 (write single register: write a binary value to a holding register)
	2035	+|10 (write values to multiple addresses )
	2036	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	2037	+|10 (write values to multiple addresses )
	2038	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	2039	+|05 (Force a single coil to force the on/off state of a logic coil)
	2040	+|0F (Write multiple bits, ie write continuously)
	2041	+|(% rowspan="3" %)1|02 (Read the input state)
	2042	+|05 (Force a single coil to force the on/off state of a logic coil)
	2043	+|0F (Write multiple bits)
	2044	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	2045	+|05 (Force a single coil to force the on/off state of a logic coil)
	2046	+|0F (Write multiple bits)
	2047	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	2048	+|0F (Write multiple bits)
	2049	+
	2050	+**Communication Settings**
	2051	+
	2052	+Enable HMI Ethernet in [Project Settings];
	2053	+
1768	1768	(% style="text-align:center" %)
1769		-[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
	2055	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
1770	1770
1771		-[Data] is all data to be sent.
	2057	+Set PLC IP in [Device IP] settings;
1772	1772
1773		-As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
	2059	+(% style="text-align:center" %)
	2060	+[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
1774	1774
1775	1775	**Cable Wiring**
1776	1776
1777	1777	(% style="text-align:center" %)
1778		-[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
	2065	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1779	1779
1780		-**✎Note:** The address interval between each frame need to be more than a word address;
1781		-
1782	1782	= **SHIMADEN** =
1783	1783
1784	1784	== **FP23** ==
...	...	@@ -1953,559 +1953,6 @@
1953	1953
1954	1954	**✎Note:** COM3 only available in PI8000/PI9000 series.
1955	1955
1956		-= **Siemens** =
1957		-
1958		-== **S7-200 Smart Ethernet** ==
1959		-
1960		-Supported Series: Siemens S7-200 SMART Series Ethernet Module.
1961		-
1962		-Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
1963		-
1964		-**HMI Setting**
1965		-
1966		-(% class="table-bordered" %)
1967		-|**Items**|**Settings**|**Note**
1968		-|Protocol|Simens S7-200 Smart Ethernet|
1969		-|Connection|Ethernet|
1970		-|Port No.|102|
1971		-|PLC station No.|2|
1972		-
1973		-**Address List**
1974		-
1975		-(% class="table-bordered" %)
1976		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
1977		-|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
1978		-|Q|Q|Q ddddd.o|0.0~~99999.7|
1979		-|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
1980		-|V|V|V ddddd.o|0.0~~99999.7|
1981		-|M|M|M ddddd.o|0.0~~99999.7|
1982		-|SM|SM|ddddd.o|0.0~~99999.7|
1983		-|S|S|ddddd.o|0.0~~99999.7|Read only
1984		-|T|T|ddddd|0~~99999|Timer state, read only
1985		-|C|C|ddddd|0~~99999|Counter state, read only
1986		-|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
1987		-|Q|QW|QW ddddd|0~~99999|
1988		-|AI|AIW|AIW ddddd|0~~99999|
1989		-|AQ|VB|VB ddddd|0~~99999|
1990		-|V|VW|VW ddddd|0~~99998|(((
1991		-VW0=VB (0~~1)
1992		-
1993		-VW2=VB (2~~3)
1994		-
1995		-Address value is a multiple of 2
1996		-)))
1997		-|V|VD|VD ddddd|0~~99998|(((
1998		-VD0=VB (0~~3)
1999		-
2000		-VD2=VB (4~~7)
2001		-
2002		-Address value is a multiple of 4
2003		-)))
2004		-|M|MB|MB ddddd|0~~99999|
2005		-|M|MW|MW ddddd|0~~99999|(((
2006		-MW0=MB(0~~1)
2007		-
2008		-MW2=MB(2~~3)
2009		-
2010		-Address value is a multiple of 2
2011		-)))
2012		-|M|MD|MD ddddd|0~~99999|(((
2013		-MD0=MB(0~~3)
2014		-
2015		-MD4=MB(4~~7)
2016		-
2017		-Address value is a multiple of 4
2018		-)))
2019		-|T|TW|TW ddddd|0~~99999|Value of timer
2020		-|C|CW|CW ddddd|0~~99999|Value of counter
2021		-|W|SW|SW ddddd|0~~99999|
2022		-
2023		-**Communication Settings**
2024		-
2025		-Enable HMI Ethernet in [Project Settings];
2026		-
2027		-(% style="text-align:center" %)
2028		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2029		-
2030		-Set PLC IP in [Device IP] settings;
2031		-
2032		-(% style="text-align:center" %)
2033		-[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
2034		-
2035		-* PLC IP Address: PLC IP
2036		-* PLC pot No.: 102(fixed)
2037		-* Network:TCP_Client_2N(fixed)
2038		-
2039		-(% style="text-align:center" %)
2040		-[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
2041		-
2042		-* Wait timeout: depend on actual network situation (more than 1500 ms)
2043		-
2044		-**Cable Wiring**
2045		-
2046		-(% style="text-align:center" %)
2047		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2048		-
2049		-== **S7-300 Ethernet** ==
2050		-
2051		-Supported Series: Siemens S7-300 series PLC
2052		-
2053		-**HMI Setting**
2054		-
2055		-(% class="table-bordered" %)
2056		-|**Items**|**Settings**|**Note**
2057		-|Protocol|Simens S7-300 Ethernet|
2058		-|Connection|Ethernet|
2059		-|Port No.|102|
2060		-|PLC station No.|2|Need to be same as the PLC setting
2061		-
2062		-**Address List**
2063		-
2064		-(% class="table-bordered" %)
2065		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2066		-|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
2067		-|Q|Q|Q ddddd.o|0.0~~99999.7|
2068		-|M|M|M ddddd.o|0.0~~99999.7|
2069		-|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
2070		-nn: block number;
2071		-
2072		-dddd: address;
2073		-)))
2074		-|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
2075		-|Q|QW|QW ddddd|0~~99999|
2076		-|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
2077		-|MW|MW ddddd|0~~99999|(((
2078		-MW0=MB(0~~1)
2079		-
2080		-MW2=MB(2~~3)
2081		-
2082		-Address value is a multiple of 2
2083		-)))
2084		-|MD|MD ddddd|0~~99999|(((
2085		-MD0=MB(0~~3)
2086		-
2087		-MD4=MB(4~~7)
2088		-
2089		-Address value is a multiple of 4
2090		-)))
2091		-|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
2092		-nn: block number;
2093		-
2094		-dddd: address
2095		-)))
2096		-|DBxDBW|DBxDBW nndddd|0~~99999999
2097		-|DBxDBD|DBxDBD nndddd|0~~99999999
2098		-
2099		-**Communication Settings**
2100		-
2101		-Enable HMI Ethernet in [Project Settings];
2102		-
2103		-(% style="text-align:center" %)
2104		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2105		-
2106		-Set PLC IP in [Device IP] settings;
2107		-
2108		-(% style="text-align:center" %)
2109		-[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
2110		-
2111		-* PLC IP Address: PLC IP
2112		-* PLC pot No.: 102(fixed)
2113		-* Network:TCP_Client_2N(fixed)
2114		-
2115		-(% style="text-align:center" %)
2116		-[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
2117		-
2118		-* Wait timeout: depend on actual network situation (more than 1500 ms)
2119		-
2120		-**Cable Wiring**
2121		-
2122		-(% style="text-align:center" %)
2123		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2124		-
2125		-== **S7-1200 Ethernet** ==
2126		-
2127		-Supported Series: Siemens S7-1200
2128		-
2129		-**HMI Setting**
2130		-
2131		-(% class="table-bordered" %)
2132		-|**Items**|**Settings**|**Note**
2133		-|Protocol|Siemens S7-1200|
2134		-|Connection|Ethernet|
2135		-|Port No.|102|
2136		-|PLC station No.|2|
2137		-
2138		-**Address List**
2139		-
2140		-(% class="table-bordered" %)
2141		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2142		-|(% rowspan="4" %)Bit|I|I|M d.o|(((
2143		-d:0~-~-9999
2144		-
2145		-o:0-7
2146		-)))|
2147		-|Q|Q|Q d.o|(((
2148		-d:0~-~-9999
2149		-
2150		-o:0-7
2151		-)))|
2152		-|M|M|M d.o|(((
2153		-d:0~-~-9999
2154		-
2155		-o:0-7
2156		-)))|
2157		-|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
2158		-nn:0-9999,
2159		-
2160		-dddd:0-9999,
2161		-
2162		-o:0-7
2163		-)))|(((
2164		-nn:DB No.
2165		-
2166		-dddd:address value
2167		-
2168		-o: digit address
2169		-)))
2170		-|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
2171		-|M|MW|MW d|d:0-99999|(((
2172		-MW0=MB(0~~1)
2173		-
2174		-MW2=MB(2~~3)
2175		-
2176		-Address value is a multiple of 2
2177		-)))
2178		-|M|MD|MD d|d:0-99999|(((
2179		-MD0=MB(0~~3)
2180		-
2181		-MD4=MB(4~~7)
2182		-
2183		-Address value is a multiple of 4
2184		-)))
2185		-|I|IW|IW d|d:0-99999|
2186		-|Q|QW|QW d|d:0-99999|
2187		-|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
2188		-nn:0-9999
2189		-
2190		-dddd:0-9999
2191		-)))|(((
2192		-nn:DB No.
2193		-
2194		-dddd:address value
2195		-)))
2196		-|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
2197		-nn:0-9999
2198		-
2199		-dddd:0-9999
2200		-)))|(((
2201		-nn:DB No.
2202		-
2203		-dddd:address value
2204		-
2205		-Address value is a multiple of 2
2206		-)))
2207		-|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
2208		-nn:0-9999
2209		-
2210		-dddd:0-9999
2211		-)))|(((
2212		-nn:DB No.
2213		-
2214		-dddd:address value
2215		-
2216		-Address value is a multiple of 4
2217		-)))
2218		-
2219		-**Communication Settings**
2220		-
2221		-Enable HMI Ethernet in [Project Settings];
2222		-
2223		-(% style="text-align:center" %)
2224		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2225		-
2226		-Set PLC IP in [Device IP] settings;
2227		-
2228		-(% style="text-align:center" %)
2229		-[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
2230		-
2231		-**✎Note:**
2232		-
2233		-* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
2234		-* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
2235		-
2236		-**PLC Settings**
2237		-
2238		-Add BD
2239		-
2240		-* Please uncheck [Symbolic access only] option;
2241		-
2242		-(% style="text-align:center" %)
2243		-[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
2244		-
2245		-Address settings, using BD2 as example.
2246		-
2247		-* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
2248		-* 2 represent DB block number
2249		-* xxxx represent address
2250		-
2251		-**Such as:**
2252		-
2253		-* DBxDBB20000 = DB2.DBB0
2254		-* DBxDBW20004 = DB2.DBW4
2255		-
2256		-(% style="text-align:center" %)
2257		-[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
2258		-
2259		-**How to connect with S7-1200 Firmware V4.0**
2260		-
2261		-PLC configuration
2262		-
2263		-* Double click [device configuration] in Siemens via software
2264		-* Double click [protection] to enter protection configuration screen
2265		-
2266		-(% style="text-align:center" %)
2267		-[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
2268		-
2269		-* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
2270		-
2271		-(% style="text-align:center" %)
2272		-[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
2273		-
2274		-DB settings
2275		-
2276		-* Right click [DB], select [properties]
2277		-* Uncheck [optimized block access]
2278		-
2279		-**Cable Wiring**
2280		-
2281		-(% style="text-align:center" %)
2282		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2283		-
2284		-== **LOGO Ethernet** ==
2285		-
2286		-Supported Series: Siemens Logo 0BA0 series
2287		-
2288		-**HMI Settings**
2289		-
2290		-(% class="table-bordered" %)
2291		-|**Items**|**Settings**|**Note**
2292		-|Protocol|Siemens LOGO|
2293		-|Connection|Ethernet|
2294		-|Port No.|102|
2295		-|PLC station No.|2|
2296		-
2297		-**Address List**
2298		-
2299		-(% class="table-bordered" %)
2300		-|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
2301		-|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
2302		-|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
2303		-|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
2304		-|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
2305		-|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
2306		-|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
2307		-|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
2308		-|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
2309		-|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
2310		-|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
2311		-|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
2312		-|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
2313		-|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
2314		-|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
2315		-|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
2316		-
2317		-**PLC Settings in LOGO Software:**
2318		-
2319		-Click [Tools]~-~-[Ethernet Connections],shown as below.
2320		-
2321		-(% style="text-align:center" %)
2322		-[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
2323		-
2324		-Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
2325		-
2326		-(% style="text-align:center" %)
2327		-[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
2328		-
2329		-**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
2330		-
2331		-(% style="text-align:center" %)
2332		-[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
2333		-
2334		-**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
2335		-
2336		-(% style="text-align:center" %)
2337		-[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
2338		-
2339		-
2340		-(% style="text-align:center" %)
2341		-[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
2342		-
2343		-
2344		-**HMI Communication Settings**
2345		-
2346		-Set PLC IP in [Device IP] settings;
2347		-
2348		-(% style="text-align:center" %)
2349		-[[image:SiemensLOGODeviceIP.png]]
2350		-
2351		-Enable HMI Ethernet in [Project Settings];
2352		-
2353		-(% style="text-align:center" %)
2354		-[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
2355		-
2356		-TSAP setting
2357		-
2358		-* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
2359		-* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
2360		-* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
2361		-
2362		-**✎Note:**
2363		-
2364		-* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
2365		-
2366		-(% style="text-align:center" %)
2367		-[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
2368		-
2369		-
2370		-* AI word address and Ibit address are read-only and cannot be written on HMI.
2371		-* VW address should be even number.such as VW0, VW2, VW4...
2372		-* VD address it takes two VW addresses.such as VD0,VD4,VD8...
2373		-* Written value of RTC cannot exceed 255.
2374		-
2375		-**Cable Wiring**
2376		-
2377		-(% style="text-align:center" %)
2378		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2379		-
2380		-== **S7-XXX Ethernet** ==
2381		-
2382		-Supported Series: Siemens S7-400, S7-1200 and S7-1500
2383		-
2384		-**HMI Setting**
2385		-
2386		-(% class="table-bordered" style="width:823px" %)
2387		-|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
2388		-|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
2389		-|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
2390		-|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
2391		-|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
2392		-|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
2393		-
2394		-Slot from TIA Portal is equal to Device No. of PIStudio
2395		-
2396		-Rack from TIA Portal is equal to HMI No. of PIStudio
2397		-
2398		-(% style="text-align:center" %)
2399		-[[image:S7-XXXCommunication Settings.png]]
2400		-
2401		-(% style="text-align:center" %)
2402		-[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
2403		-
2404		-**Address List**
2405		-
2406		-(% class="table-bordered" %)
2407		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2408		-|(% rowspan="4" %)Bit|I|I|M d.o|(((
2409		-d:0~-~-9999
2410		-
2411		-o:0-7
2412		-)))|
2413		-|Q|Q|Q d.o|(((
2414		-d:0~-~-9999
2415		-
2416		-o:0-7
2417		-)))|
2418		-|M|M|M d.o|(((
2419		-d:0~-~-9999
2420		-
2421		-o:0-7
2422		-)))|
2423		-|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
2424		-nn:0-9999,
2425		-
2426		-dddd:0-9999,
2427		-
2428		-o:0-7
2429		-)))|(((
2430		-nn:DB No.
2431		-
2432		-dddd:address value
2433		-
2434		-o: digit address
2435		-)))
2436		-|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
2437		-|M|MW|MW d|d:0-99999|(((
2438		-MW0=MB(0~~1)
2439		-
2440		-MW2=MB(2~~3)
2441		-
2442		-Address value is a multiple of 2
2443		-)))
2444		-|M|MD|MD d|d:0-99999|(((
2445		-MD0=MB(0~~3)
2446		-
2447		-MD4=MB(4~~7)
2448		-
2449		-Address value is a multiple of 4
2450		-)))
2451		-|I|IW|IW d|d:0-99999|
2452		-|Q|QW|QW d|d:0-99999|
2453		-|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
2454		-nn:0-9999
2455		-
2456		-dddd:0-9999
2457		-)))|(((
2458		-nn:DB No.
2459		-
2460		-dddd:address value
2461		-)))
2462		-|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
2463		-nn:0-9999
2464		-
2465		-dddd:0-9999
2466		-)))|(((
2467		-nn:DB No.
2468		-
2469		-dddd:address value
2470		-
2471		-Address value is a multiple of 2
2472		-)))
2473		-|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
2474		-nn:0-9999
2475		-
2476		-dddd:0-9999
2477		-)))|(((
2478		-nn:DB No.
2479		-
2480		-dddd:address value
2481		-
2482		-Address value is a multiple of 4
2483		-)))
2484		-
2485		-**Communication Settings**
2486		-
2487		-Enable HMI Ethernet in [Project Settings];
2488		-
2489		-(% style="text-align:center" %)
2490		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
2491		-
2492		-Set PLC IP in [Device IP] settings;
2493		-
2494		-(% style="text-align:center" %)
2495		-[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
2496		-
2497		-**✎Note:**
2498		-
2499		-* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
2500		-* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
2501		-
2502		-**Cable Wiring**
2503		-
2504		-{{id name="OLE_LINK8"/}}
2505		-
2506		-(% style="text-align:center" %)
2507		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2508		-
2509	2509	= **User Defined Protocol** =
2510	2510
2511	2511	If the device does not support MODBUS standard, and the protocol is not list in PIStudio, then user can define the protocol by following instruction to realize simply communication functions like sending and receiving commands.
...	...	@@ -2650,8 +2650,6 @@
2650	2650
2651	2651	**✎Note:** COM3 only available in PI8000/PI9000 series.
2652	2652
2653		-= =
2654		-
2655	2655	= **Printer** =
2656	2656
2657	2657	== **TSPL label printer** ==
...	...	@@ -2852,3 +2852,449 @@
2852	2852
2853	2853	(% style="text-align:center" %)
2854	2854	[[image:image-20220817154212-1.jpeg||height="315" width="554" class="img-thumbnail"]]
	2585	+
	2586	+= **Barcode Scanner** =
	2587	+
	2588	+Supported: DELI 14880 barcode scanner
	2589	+
	2590	+**HMI Setting**
	2591	+
	2592	+|**Items**|**Settings**|**Note**
	2593	+|Protocol|Barcode Scanner|
	2594	+|Connection|USB|
	2595	+
	2596	+**Operating Procedures**
	2597	+
	2598	+Select [Barcode Scanner];
	2599	+
	2600	+(% style="text-align:center" %)
	2601	+[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	2602	+
	2603	+Set address for receiving;
	2604	+
	2605	+Set correct length;
	2606	+
	2607	+(% style="text-align:center" %)
	2608	+[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	2609	+
	2610	+**✎Note:**
	2611	+
	2612	+* The protocol uploads the information acquired by the USB scanner to the HMI;
	2613	+* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
	2614	+* Recommended model: DELI 14880 barcode scanner;
	2615	+
	2616	+= **Hitachi EHV Series (Ethernet)** =
	2617	+
	2618	+Supported series: Hitachi EHV series
	2619	+
	2620	+**HMI Settings**
	2621	+
	2622	+(% class="table-bordered" %)
	2623	+|**Items**|**Settings**|**Note**
	2624	+|Protocol|Hitachi EHV series|
	2625	+|Connection|Ethernet|
	2626	+|Port No.|3004~~3007|
	2627	+
	2628	+**Address List**
	2629	+
	2630	+(% class="table-bordered" %)
	2631	+|**Type**|**Register**|**Range**|**Format**|**Note**
	2632	+|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
	2633	+|M|0 - 7FFF.f (Hex)|M HHHH.h|
	2634	+|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
	2635	+H1H2H3H4 Module main number
	2636	+
	2637	+H1: Remote number
	2638	+
	2639	+H2: Unit number
	2640	+
	2641	+H3: Slot number
	2642	+
	2643	+H4: Word number of Module
	2644	+
	2645	+H Sub number of Module
	2646	+
	2647	+For example:X21.3
	2648	+
	2649	+Slot number 2
	2650	+
	2651	+Word number of module is 1
	2652	+
	2653	+Bit number of module is 3
	2654	+
	2655	+Remote number and unit number are 0
	2656	+)))
	2657	+|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
	2658	+|R|0 – FF.f (Hex)|R HH.h|
	2659	+|L|0 - 73FF.f (Hex)|L HHHH.h|
	2660	+|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
	2661	+|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
	2662	+H1H2H3H4 Module main number
	2663	+
	2664	+H1: Remote number
	2665	+
	2666	+H2: Unit number
	2667	+
	2668	+H3: Slot number
	2669	+
	2670	+H4: Word number of module
	2671	+
	2672	+For example:WX21
	2673	+
	2674	+Word number of module is 1
	2675	+
	2676	+Slot number is 2
	2677	+
	2678	+Remote number and unit number are 0
	2679	+)))
	2680	+|WY|0 – FFFF (Hex)|WY H1H2H3H4
	2681	+|WR|0 – FFFF (Hex)|WR HHHH|
	2682	+|WL|0 - 73FF (Hex)|WL HHHH|
	2683	+|TC|0 - 2559|TC DDDD|
	2684	+
	2685	+**Communication settings in HMI**
	2686	+
	2687	+Enable HMI Ethernet in [Project Settings];
	2688	+
	2689	+(% style="text-align:center" %)
	2690	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2691	+
	2692	+Set PLC IP in [Device IP] settings;
	2693	+
	2694	+(% style="text-align:center" %)
	2695	+[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	2696	+
	2697	+**PLC Configuration**
	2698	+
	2699	+Connect with PLC, select[Online mode];
	2700	+
	2701	+(% style="text-align:center" %)
	2702	+[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	2703	+
	2704	+Set IP address, it is the same LAN parameters with HMI;
	2705	+
	2706	+(% style="text-align:center" %)
	2707	+[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	2708	+
	2709	+3) Save PLC communication parameter, and restart PLC
	2710	+
	2711	+**PLC Monitor Mode**
	2712	+
	2713	+Connect with PLC and choose to “online” mode
	2714	+
	2715	+(% style="text-align:center" %)
	2716	+[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	2717	+
	2718	+Open I/O monitor sheet1
	2719	+
	2720	+(% style="text-align:center" %)
	2721	+[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	2722	+
	2723	+During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	2724	+
	2725	+(% style="text-align:center" %)
	2726	+[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	2727	+
	2728	+Enter the register address, click OK to view the value of the register.
	2729	+
	2730	+(% style="text-align:center" %)
	2731	+[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	2732	+
	2733	+(% style="text-align:center" %)
	2734	+[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	2735	+
	2736	+**✎Note:**
	2737	+
	2738	+* Both word registers and bit registers support even continuous read/write functions;
	2739	+* The range of registers is based on the specific PLC type;
	2740	+
	2741	+**Cable Wiring**
	2742	+
	2743	+(% style="text-align:center" %)
	2744	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	2745	+
	2746	+= **IEC60870-5 104 Client** =
	2747	+
	2748	+**HMI Setting**
	2749	+
	2750	+(% class="table-bordered" %)
	2751	+|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
	2752	+|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
	2753	+|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
	2754	+|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	2755	+
	2756	+**Address List**
	2757	+
	2758	+(% class="table-bordered" %)
	2759	+|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
	2760	+|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
	2761	+|(% style="width:461px" %)SCNA|0~~16777215.7
	2762	+|(% style="width:461px" %)DPTB|0~~16777215.7
	2763	+|(% style="width:461px" %)DCNA|0~~16777215.7
	2764	+|(% style="width:461px" %)METF|0~~16777215.7
	2765	+|(% style="width:461px" %)SENC|0~~16777215.7
	2766	+|(% style="width:461px" %)SENA|0~~16777215.7
	2767	+|(% style="width:461px" %)MENA|0~~16777215.7
	2768	+|(% style="width:461px" %)METD|0~~16777215.7
	2769	+|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
	2770	+|(% style="width:461px" %)SCNA|0~~16777215
	2771	+|(% style="width:461px" %)DPTB|0~~16777215
	2772	+|(% style="width:461px" %)DCNA|0~~16777215
	2773	+|(% style="width:461px" %)SENA|0~~16777215
	2774	+|(% style="width:461px" %)MENA|0~~16777215
	2775	+|(% style="width:461px" %)METD|0~~16777215
	2776	+|(% style="width:461px" %)INRO|0~~16777215
	2777	+|(% style="width:461px" %)TIMESYN|0~~16777215
	2778	+|(% style="width:461px" %)TIMEZ|0~~16777215
	2779	+|(% style="width:461px" %)NTP|0~~16777215
	2780	+|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
	2781	+|(% style="width:461px" %)SENC|0~~16777215
	2782	+
	2783	+**Address Configuration**
	2784	+
	2785	+The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	2786	+
	2787	+(% style="text-align:center" %)
	2788	+[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	2789	+
	2790	+(% style="text-align:center" %)
	2791	+[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	2792	+
	2793	+Extended tag name
	2794	+
	2795	+Address range for the extended tag.
	2796	+
	2797	+**Communication Settings**
	2798	+
	2799	+Enable HMI Ethernet in [Project Settings];
	2800	+
	2801	+(% style="text-align:center" %)
	2802	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2803	+
	2804	+Set PLC IP in [Device IP] settings;
	2805	+
	2806	+(% style="text-align:center" %)
	2807	+[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	2808	+
	2809	+**Cable Wiring**
	2810	+
	2811	+(% style="text-align:center" %)
	2812	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	2813	+
	2814	+= **LG XGK FEnet Ethernet** =
	2815	+
	2816	+Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	2817	+
	2818	+**HMI Settings**
	2819	+
	2820	+(% class="table-bordered" %)
	2821	+|**Items**|**Settings**|**Note**
	2822	+|Protocol|LG XGK FEnet(Ethernet)|
	2823	+|Connection|Ethernet|
	2824	+|Port No.|2004|
	2825	+
	2826	+**Address List**
	2827	+
	2828	+(% class="table-bordered" %)
	2829	+|**Type**|**Register**|**Range**|**Format**|**Note**
	2830	+|(% rowspan="14" %)Word|P|0~~2047|P d|
	2831	+|M|0~~2047|M d|
	2832	+|K|0~~2047|K d|
	2833	+|F|0~~2047|F d|
	2834	+|T|0~~2047|T d|
	2835	+|C|0~~2047|C d|
	2836	+|Z|0~~127|Z d|
	2837	+|S|0~~127|S d|
	2838	+|L|0~~11263|L d|
	2839	+|N|0~~21503|N d|
	2840	+|D|0~~32767|D d|
	2841	+|R|0~~32767|R d|
	2842	+|ZR|0~~65535|ZR d|
	2843	+|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	2844	+
	2845	+**✎Note:**
	2846	+
	2847	+* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
	2848	+* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
	2849	+* All bit registers are in the form of bits in word, and the range is the same as the word register;
	2850	+
	2851	+**Communication settings in HMI**
	2852	+
	2853	+Enable HMI Ethernet in [Project Settings];
	2854	+
	2855	+(% style="text-align:center" %)
	2856	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2857	+
	2858	+Set PLC IP in [Device IP] settings;
	2859	+
	2860	+(% style="text-align:center" %)
	2861	+[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	2862	+
	2863	+**Cable Wiring**
	2864	+
	2865	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	2866	+
	2867	+
	2868	+= **OpenCAN** =
	2869	+
	2870	+OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
	2871	+
	2872	+This protocol is only available in PI8000 series HMI.
	2873	+
	2874	+**HMI Settings**
	2875	+
	2876	+|**Items**|**Settings**|**Note**
	2877	+|Protocol|OPENCAN|
	2878	+|Connection|CAN port|
	2879	+|Baud rate|250000|
	2880	+
	2881	+**CAN frame setting in HMI**
	2882	+
	2883	+Click [OpenCAN setting] button in communication setting window;
	2884	+
	2885	+(% style="text-align:center" %)
	2886	+[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
	2887	+
	2888	+Click [Add] to create a new frame;
	2889	+
	2890	+(% style="text-align:center" %)
	2891	+[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
	2892	+
	2893	+|**No**|**Items**|**Description**
	2894	+|1|Add|add a frame related to register address
	2895	+|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
	2896	+|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
	2897	+|4|Modify|Modify the frames in frame management
	2898	+|5|Copy|Copy one frame to another
	2899	+|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
	2900	+|7|Empty|All frames in the list are cleared
	2901	+|8|Browse|Displays configuration files in XML format in IE
	2902	+|9|OK|Complete the configuration of the frame and exit
	2903	+
	2904	+Set CANBUS frame in setting windows
	2905	+
	2906	+(% style="text-align:center" %)
	2907	+[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
	2908	+
	2909	+|**No**|**Items**|**Description**
	2910	+|1|ID|Set the ID of a can frame in hexadecimal format;
	2911	+|2|ID assign|split the ID by PF, PS, and SA;
	2912	+|3|Frame type|Select Standard frame or Extended Frame;
	2913	+|4|Frame format|Select between data frame and remote Frame;
	2914	+|5|Data|Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
	2915	+|6|Use address|(((
	2916	+Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
	2917	+
	2918	+**Edit:** Set a bit or word address by its format;
	2919	+
	2920	+**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
	2921	+)))
	2922	+|(% rowspan="8" %)7|(% rowspan="8" %)Data interactive configuration|There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
	2923	+|Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
	2924	+|Feedback mode: feedback mode includes no response, confirm response and data response;
	2925	+|No response: the device or touch screen will not receive feedback;
	2926	+|Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
	2927	+|Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
	2928	+|response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
	2929	+|Response timeout: sets whether the response frame timeout;
	2930	+|(% rowspan="3" %)8|(% rowspan="3" %)Control address|If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
	2931	+|Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
	2932	+|Manually send: a manually send tick indicates only one send;
	2933	+|9|Flag configuration|Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
	2934	+|10|Note|Fill the text to explain the meaning of the frame;
	2935	+|11|Data assign|Preview the display in this table based on the address and the corresponding number of digits;
	2936	+|12|Current operation display|Display the description of current operation;
	2937	+|13|Add|Add a new frame;
	2938	+|14|Save frame|Save the configured frame format;
	2939	+|15|Cancel|Cancel the frame configuration;
	2940	+
	2941	+Set CAN address (Read or write operation);
	2942	+
	2943	+(% style="text-align:center" %)
	2944	+[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
	2945	+
	2946	+|**No.**|**Item**|**Description**
	2947	+|1|Current address|Displays the register type and register address set by the user in the data access interface
	2948	+|(% rowspan="3" %)2|(% rowspan="3" %)Trigger|Two operations, "read" and "write," are based on on-screen registers
	2949	+|If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
	2950	+|If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
	2951	+|(% rowspan="5" %)3|(% rowspan="3" %)Data operation|The read and write operations in the trigger conditions are set accordingly.
	2952	+|If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
	2953	+|If the trigger condition is a writing operation, there are two situations:(((
	2954	+* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
	2955	+* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
	2956	+)))
	2957	+|(% rowspan="2" %)Position and length input format|If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
	2958	+|If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
	2959	+|4|Add|Add current configuration
	2960	+|5|Close|Close the configuration window to exit
	2961	+
	2962	+**Multiple Packages Settings**
	2963	+
	2964	+(% style="text-align:center" %)
	2965	+[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
	2966	+
	2967	+Check [Multiple packages supported] to open [Multiple package data] window, as below show.
	2968	+
	2969	+Select Multiple package type
	2970	+
	2971	+* Not Multiple packages
	2972	+* J1939 Multiple packages
	2973	+* Customized Multiple packages
	2974	+
	2975	+Click [Edit Receive data] for [Receive] settings
	2976	+
	2977	+* Start code+ Total length (J1939)
	2978	+
	2979	+(% style="text-align:center" %)
	2980	+[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2981	+
	2982	+As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
	2983	+
	2984	+* Start code + Data max length (J1939)
	2985	+
	2986	+(% style="text-align:center" %)
	2987	+[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2988	+
	2989	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
	2990	+
	2991	+* Data max length (J1939)
	2992	+
	2993	+(% style="text-align:center" %)
	2994	+[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2995	+
	2996	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
	2997	+
	2998	+* Customized multiple package
	2999	+
	3000	+(% style="text-align:center" %)
	3001	+[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
	3002	+
	3003	+As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
	3004	+
	3005	+Click [Edit Send data] for [Send] setting
	3006	+
	3007	+* J1939
	3008	+
	3009	+(% style="text-align:center" %)
	3010	+[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
	3011	+
	3012	+[Data] is all data to be sent.
	3013	+
	3014	+Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
	3015	+
	3016	+* Customized multiple package
	3017	+
	3018	+(% style="text-align:center" %)
	3019	+[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
	3020	+
	3021	+[Data] is all data to be sent.
	3022	+
	3023	+As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
	3024	+
	3025	+**Cable Wiring**
	3026	+
	3027	+(% style="text-align:center" %)
	3028	+[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
	3029	+
	3030	+**✎Note:** The address interval between each frame need to be more than a word address;

image-20220829151746-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.1 KB

Content

image-20220829151848-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.0 KB

Content

image-20220829152016-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.2 KB

Content

image-20220829152042-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.0 KB

Content

image-20220829152102-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.3 KB

Content

image-20220829152327-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+42.5 KB

Content

image-20220829152610-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.5 KB

Content

image-20220829155452-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.1 KB

Content

image-20220829162116-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+50.4 KB

Content

image-20220830094600-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.4 KB

Content

image-20220830094657-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.4 KB

Content

image-20220830094929-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.4 KB

Content

image-20220830095131-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.7 KB

Content

image-20220830140537-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.2 KB

Content

image-20220830140629-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+48.4 KB

Content

image-20220830141138-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.9 KB

Content