Changes for page 12 PLC Protocol OLD

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 16 added, 0 removed)
  • image-20220829151746-1.png
  • image-20220829151848-2.png
  • image-20220829152016-3.png
  • image-20220829152042-4.png
  • image-20220829152102-5.png
  • image-20220829152327-6.png
  • image-20220829152610-7.png
  • image-20220829155452-1.png
  • image-20220829162116-2.png
  • image-20220830094600-1.png
  • image-20220830094657-2.png
  • image-20220830094929-1.png
  • image-20220830095131-1.png
  • image-20220830140537-1.png
  • image-20220830140629-2.png
  • image-20220830141138-1.png

Details

Page properties

Content

...	...	@@ -87,6 +87,7 @@
87	87
88	88	= Create communication with WECON PLC =
89	89
	90	+== **LX3V Serial Protocol** ==
90	90
91	91	Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
92	92
...	...	@@ -140,7 +140,8 @@
140	140
141	141	[[https:~~/~~/drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing>>url:https://drive.google.com/drive/folders/13rgso7oUlatZQN_SNEcJCcN4toEdDPoP?usp=sharing]]
142	142
143		-== HMI settings ==
	144	+(% class="wikigeneratedid" id="HHMIsettings" %)
	145	+**HMI settings**
144	144
145	145	**Download PIStudio Software**
146	146
...	...	@@ -229,7 +229,8 @@
229	229	* HMI setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/>>https://docs.we-con.com.cn/bin/view/PIStudio/12.PLC%20protocols/]]
230	230	* PLC setting: [[https:~~/~~/docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/>>https://docs.we-con.com.cn/bin/view/PLC%20Editor/8.1.%09Communication/]]
231	231
232		-== PLC settings ==
	234	+(% class="wikigeneratedid" id="HPLCsettings" %)
	235	+**PLC settings**
233	233
234	234	**Download PLC Software**
235	235
...	...	@@ -314,7 +314,7 @@
314	314	(% style="text-align:center" %)
315	315	[[image:image-20220819105928-9.png||height="229" width="669"]]
316	316
317		-= **HMI and Wecon LX5V serial communication** =
	320	+== **LX5V Serial Protocol** ==
318	318
319	319	This example introduces the establishment of serial port communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
320	320
...	...	@@ -392,11 +392,10 @@
392	392
393	393	The above are all the steps for establishing serial port communication between Wecon HMI with LX5V PLC.
394	394
395		-== **HMI and Wecon LX5V-N Ethernet communication** ==
	398	+== **LX5V-N Ethernet protocol** ==
396	396
397	397	(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
398	398
399		-
400	400	**Software configuration of PLC**
401	401
402	402	**1）PLC programming software**
...	...	@@ -466,12 +466,51 @@
466	466
467	467	The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
468	468
469		-= =
	471	+= Create communication with **Rockwell PLC** =
470	470
471		-= **Allen-Bradley** =
	473	+== **MicroLogix Protocol** ==
472	472
473		-== **FreeTag Ethernet/IP (CompactLogix)** ==
	475	+MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
474	474
	477	+**HMI Settings**
	478	+
	479	+(% class="table-bordered" %)
	480	+|**Item**|**Settings**|**Note**
	481	+|Protocol|Allen-Bradlley MicroLogix|
	482	+|Connection|RS232|
	483	+|Baud rate|19200|
	484	+|Data bit|8|
	485	+|Parity|None|
	486	+|Stop bit|1|
	487	+|PLC station No.|1|
	488	+
	489	+**Address List**
	490	+
	491	+(% class="table-bordered" %)
	492	+|**Type**|**Device registers**|**Format**|**Range**|**Note**
	493	+|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
	494	+|O|O d.d|0.0~~255.15|
	495	+|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	496	+|S|S d.d|0.0~~255.15|
	497	+|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	498	+|(% rowspan="9" %)Word|S|S d|0~~255|
	499	+|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
	500	+|TP|TP nnhh|0~~ffff
	501	+|CS|CS nnhh|0~~ffff
	502	+|CP|CP nnhh|0~~ffff
	503	+|N|N nnhh|0~~ffff
	504	+|C|C nnhh|0~~ffff
	505	+|T|T nnhh|0~~ffff
	506	+|R|R nnhh|0~~ffff
	507	+
	508	+**Cable Wiring**
	509	+
	510	+
	511	+(% style="text-align:center" %)
	512	+[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
	513	+
	514	+== **CompactLogix FreeTag Ethernet protocol** ==
	515	+
475	475	Allen-Brandly CompactLogix
476	476
477	477	**HMI Settings**
...	...	@@ -527,48 +527,8 @@
527	527	(% style="text-align:center" %)
528	528	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
529	529
530		-== **MicroLogix** ==
	571	+== **MicroLogix 1200** ** protocol** ==
531	531
532		-MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
533		-
534		-**HMI Settings**
535		-
536		-(% class="table-bordered" %)
537		-|**Item**|**Settings**|**Note**
538		-|Protocol|Allen-Bradlley MicroLogix|
539		-|Connection|RS232|
540		-|Baud rate|19200|
541		-|Data bit|8|
542		-|Parity|None|
543		-|Stop bit|1|
544		-|PLC station No.|1|
545		-
546		-**Address List**
547		-
548		-(% class="table-bordered" %)
549		-|**Type**|**Device registers**|**Format**|**Range**|**Note**
550		-|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
551		-|O|O d.d|0.0~~255.15|
552		-|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
553		-|S|S d.d|0.0~~255.15|
554		-|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
555		-|(% rowspan="9" %)Word|S|S d|0~~255|
556		-|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
557		-|TP|TP nnhh|0~~ffff
558		-|CS|CS nnhh|0~~ffff
559		-|CP|CP nnhh|0~~ffff
560		-|N|N nnhh|0~~ffff
561		-|C|C nnhh|0~~ffff
562		-|T|T nnhh|0~~ffff
563		-|R|R nnhh|0~~ffff
564		-
565		-**Cable Wiring**
566		-
567		-(% style="text-align:center" %)
568		-[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
569		-
570		-== **AB PLC address edit** ==
571		-
572	572	The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
573	573
574	574	* **Bit address I:** The address ranges from 0.0 to 255.15. The value of the data before the decimal point ranges from 0 to 255 (decimal). The value from 0 to 15 after the decimal point is the sub address (decimal).
...	...	@@ -584,117 +584,280 @@
584	584	|(% style="width:393px" %)B|(% style="width:350px" %)fff.dd|(% style="width:333px" %)B 000.0 ~~ fff.15
585	585	|(% style="width:393px" %)S|(% style="width:350px" %)dd.dd|(% style="width:333px" %)S 0.0 ~~ 255.15
586	586	|(% style="width:393px" %)N|(% style="width:350px" %)ffff.dd|(% style="width:333px" %)N 000.0 ~~ fff.15
587		-|(% style="width:393px" %)**PLC word address type**|(% style="width:350px" %)**Address format**|(% style="width:333px" %)**Address range**
588		-|(% style="width:393px" %)S|(% style="width:350px" %)ddd|(% style="width:333px" %)S0 ~~ 255
589		-|(% style="width:393px" %)TS|(% style="width:350px" %)ffff|(% style="width:333px" %)TS0 ~~ FFFF
590		-|(% style="width:393px" %)TP|(% style="width:350px" %)ffff|(% style="width:333px" %)TP0 ~~ FFFF
591		-|(% style="width:393px" %)CS|(% style="width:350px" %)ffff|(% style="width:333px" %)CS0 ~~ FFFF
592		-|(% style="width:393px" %)CP|(% style="width:350px" %)ffff|(% style="width:333px" %)CP0 ~~ FFFF
593		-|(% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF
594		-|(% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF
	588	+|**PLC word address type**|**Address format**|**Address range**
	589	+|S|ddd|S0 ~~ 255
	590	+|TS|ffff|TS0 ~~ FFFF
	591	+|TP|ffff|TP0 ~~ FFFF
	592	+|CS|ffff|CS0 ~~ FFFF
	593	+|CP|ffff|CP0 ~~ FFFF
	594	+|N|ffff|N0 ~~ FFFF
	595	+|F|ffff|F0 ~~ FFFF
595	595
596		-= **Barcode Scanner** =
	597	+= Create communication with (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens PLC** =
597	597
598		-Supported: DELI 14880 barcode scanner
	599	+== **S7-200 Smart Ethernet Protocol** ==
599	599
	601	+Supported Series: Siemens S7-200 SMART Series Ethernet Module.
	602	+
	603	+Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
	604	+
600	600	**HMI Setting**
601	601
602	602	(% class="table-bordered" %)
603	603	|**Items**|**Settings**|**Note**
604		-|Protocol|Barcode Scanner|
605		-|Connection|USB|
	609	+|Protocol|Simens S7-200 Smart Ethernet|
	610	+|Connection|Ethernet|
	611	+|Port No.|102|
	612	+|PLC station No.|2|
606	606
607		-**Operating Procedures**
	614	+**Address List**
608	608
609		-Select [Barcode Scanner];
	616	+(% class="table-bordered" %)
	617	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	618	+|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	619	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	620	+|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
	621	+|V|V|V ddddd.o|0.0~~99999.7|
	622	+|M|M|M ddddd.o|0.0~~99999.7|
	623	+|SM|SM|ddddd.o|0.0~~99999.7|
	624	+|S|S|ddddd.o|0.0~~99999.7|Read only
	625	+|T|T|ddddd|0~~99999|Timer state, read only
	626	+|C|C|ddddd|0~~99999|Counter state, read only
	627	+|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
	628	+|Q|QW|QW ddddd|0~~99999|
	629	+|AI|AIW|AIW ddddd|0~~99999|
	630	+|AQ|VB|VB ddddd|0~~99999|
	631	+|V|VW|VW ddddd|0~~99998|(((
	632	+VW0=VB (0~~1)
610	610
	634	+VW2=VB (2~~3)
	635	+
	636	+Address value is a multiple of 2
	637	+)))
	638	+|V|VD|VD ddddd|0~~99998|(((
	639	+VD0=VB (0~~3)
	640	+
	641	+VD2=VB (4~~7)
	642	+
	643	+Address value is a multiple of 4
	644	+)))
	645	+|M|MB|MB ddddd|0~~99999|
	646	+|M|MW|MW ddddd|0~~99999|(((
	647	+MW0=MB(0~~1)
	648	+
	649	+MW2=MB(2~~3)
	650	+
	651	+Address value is a multiple of 2
	652	+)))
	653	+|M|MD|MD ddddd|0~~99999|(((
	654	+MD0=MB(0~~3)
	655	+
	656	+MD4=MB(4~~7)
	657	+
	658	+Address value is a multiple of 4
	659	+)))
	660	+|T|TW|TW ddddd|0~~99999|Value of timer
	661	+|C|CW|CW ddddd|0~~99999|Value of counter
	662	+|W|SW|SW ddddd|0~~99999|
	663	+
	664	+**Communication Settings**
	665	+
	666	+Enable HMI Ethernet in [Project Settings];
	667	+
611	611	(% style="text-align:center" %)
612		-[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	669	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
613	613
614		-Set address for receiving;
	671	+Set PLC IP in [Device IP] settings;
615	615
616		-Set correct length;
	673	+(% style="text-align:center" %)
	674	+[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
617	617
	676	+* PLC IP Address: PLC IP
	677	+* PLC pot No.: 102(fixed)
	678	+* Network:TCP_Client_2N(fixed)
	679	+
618	618	(% style="text-align:center" %)
619		-[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	681	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
620	620
621		-**✎Note:**
	683	+* Wait timeout: depend on actual network situation (more than 1500 ms)
622	622
623		-* The protocol uploads the information acquired by the USB scanner to the HMI;
624		-* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
625		-* Recommended model: DELI 14880 barcode scanner;
	685	+**Cable Wiring**
626	626
627		-= **Hitachi EHV Series (Ethernet)** =
	687	+(% style="text-align:center" %)
	688	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
628	628
629		-Supported series: Hitachi EHV series
	690	+== **S7-300 Ethernet Protocol** ==
630	630
631		-**HMI Settings**
	692	+Supported Series: Siemens S7-300 series PLC
632	632
	694	+**HMI Setting**
	695	+
633	633	(% class="table-bordered" %)
634	634	|**Items**|**Settings**|**Note**
635		-|Protocol|Hitachi EHV series|
	698	+|Protocol|Simens S7-300 Ethernet|
636	636	|Connection|Ethernet|
637		-|Port No.|3004~~3007|
	700	+|Port No.|102|
	701	+|PLC station No.|2|Need to be same as the PLC setting
638	638
639	639	**Address List**
640	640
641	641	(% class="table-bordered" %)
642		-|**Type**|**Register**|**Range**|**Format**|**Note**
643		-|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
644		-|M|0 - 7FFF.f (Hex)|M HHHH.h|
645		-|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
646		-H1H2H3H4 Module main number
	706	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	707	+|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	708	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	709	+|M|M|M ddddd.o|0.0~~99999.7|
	710	+|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
	711	+nn: block number;
647	647
648		-H1: Remote number
	713	+dddd: address;
	714	+)))
	715	+|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
	716	+|Q|QW|QW ddddd|0~~99999|
	717	+|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
	718	+|MW|MW ddddd|0~~99999|(((
	719	+MW0=MB(0~~1)
649	649
650		-H2: Unit number
	721	+MW2=MB(2~~3)
651	651
652		-H3: Slot number
	723	+Address value is a multiple of 2
	724	+)))
	725	+|MD|MD ddddd|0~~99999|(((
	726	+MD0=MB(0~~3)
653	653
654		-H4: Word number of Module
	728	+MD4=MB(4~~7)
655	655
656		-H Sub number of Module
	730	+Address value is a multiple of 4
	731	+)))
	732	+|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
	733	+nn: block number;
657	657
658		-For example:X21.3
	735	+dddd: address
	736	+)))
	737	+|DBxDBW|DBxDBW nndddd|0~~99999999
	738	+|DBxDBD|DBxDBD nndddd|0~~99999999
659	659
660		-Slot number 2
	740	+**Communication Settings**
661	661
662		-Word number of module is 1
	742	+Enable HMI Ethernet in [Project Settings];
663	663
664		-Bit number of module is 3
	744	+(% style="text-align:center" %)
	745	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
665	665
666		-Remote number and unit number are 0
	747	+Set PLC IP in [Device IP] settings;
	748	+
	749	+(% style="text-align:center" %)
	750	+[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
	751	+
	752	+* PLC IP Address: PLC IP
	753	+* PLC pot No.: 102(fixed)
	754	+* Network:TCP_Client_2N(fixed)
	755	+
	756	+(% style="text-align:center" %)
	757	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
	758	+
	759	+* Wait timeout: depend on actual network situation (more than 1500 ms)
	760	+
	761	+**Cable Wiring**
	762	+
	763	+(% style="text-align:center" %)
	764	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	765	+
	766	+== **S7-1200 Ethernet Protocol** ==
	767	+
	768	+Supported Series: Siemens S7-1200
	769	+
	770	+**HMI Setting**
	771	+
	772	+(% class="table-bordered" %)
	773	+|**Items**|**Settings**|**Note**
	774	+|Protocol|Siemens S7-1200|
	775	+|Connection|Ethernet|
	776	+|Port No.|102|
	777	+|PLC station No.|2|
	778	+
	779	+**Address List**
	780	+
	781	+(% class="table-bordered" %)
	782	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	783	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	784	+d:0~-~-9999
	785	+
	786	+o:0-7
	787	+)))|
	788	+|Q|Q|Q d.o|(((
	789	+d:0~-~-9999
	790	+
	791	+o:0-7
	792	+)))|
	793	+|M|M|M d.o|(((
	794	+d:0~-~-9999
	795	+
	796	+o:0-7
	797	+)))|
	798	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	799	+nn:0-9999,
	800	+
	801	+dddd:0-9999,
	802	+
	803	+o:0-7
	804	+)))|(((
	805	+nn:DB No.
	806	+
	807	+dddd:address value
	808	+
	809	+o: digit address
667	667	)))
668		-|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
669		-|R|0 – FF.f (Hex)|R HH.h|
670		-|L|0 - 73FF.f (Hex)|L HHHH.h|
671		-|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
672		-|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
673		-H1H2H3H4 Module main number
	811	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	812	+|M|MW|MW d|d:0-99999|(((
	813	+MW0=MB(0~~1)
674	674
675		-H1: Remote number
	815	+MW2=MB(2~~3)
676	676
677		-H2: Unit number
	817	+Address value is a multiple of 2
	818	+)))
	819	+|M|MD|MD d|d:0-99999|(((
	820	+MD0=MB(0~~3)
678	678
679		-H3: Slot number
	822	+MD4=MB(4~~7)
680	680
681		-H4: Word number of module
	824	+Address value is a multiple of 4
	825	+)))
	826	+|I|IW|IW d|d:0-99999|
	827	+|Q|QW|QW d|d:0-99999|
	828	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	829	+nn:0-9999
682	682
683		-For example:WX21
	831	+dddd:0-9999
	832	+)))|(((
	833	+nn:DB No.
684	684
685		-Word number of module is 1
	835	+dddd:address value
	836	+)))
	837	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	838	+nn:0-9999
686	686
687		-Slot number is 2
	840	+dddd:0-9999
	841	+)))|(((
	842	+nn:DB No.
688	688
689		-Remote number and unit number are 0
	844	+dddd:address value
	845	+
	846	+Address value is a multiple of 2
690	690	)))
691		-|WY|0 – FFFF (Hex)|WY H1H2H3H4
692		-|WR|0 – FFFF (Hex)|WR HHHH|
693		-|WL|0 - 73FF (Hex)|WL HHHH|
694		-|TC|0 - 2559|TC DDDD|
	848	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	849	+nn:0-9999
695	695
696		-**Communication settings in HMI**
	851	+dddd:0-9999
	852	+)))|(((
	853	+nn:DB No.
697	697
	855	+dddd:address value
	856	+
	857	+Address value is a multiple of 4
	858	+)))
	859	+
	860	+**Communication Settings**
	861	+
698	698	Enable HMI Ethernet in [Project Settings];
699	699
700	700	(% style="text-align:center" %)
...	...	@@ -703,180 +703,286 @@
703	703	Set PLC IP in [Device IP] settings;
704	704
705	705	(% style="text-align:center" %)
706		-[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	870	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
707	707
708		-**PLC Configuration**
	872	+**✎Note:**
709	709
710		-Connect with PLC, select[Online mode];
	874	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	875	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
711	711
712		-(% style="text-align:center" %)
713		-[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	877	+**PLC Settings**
714	714
715		-Set IP address, it is the same LAN parameters with HMI;
	879	+Add BD
716	716
	881	+* Please uncheck [Symbolic access only] option;
	882	+
717	717	(% style="text-align:center" %)
718		-[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	884	+[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
719	719
720		-3) Save PLC communication parameter, and restart PLC
	886	+Address settings, using BD2 as example.
721	721
722		-**PLC Monitor Mode**
	888	+* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	889	+* 2 represent DB block number
	890	+* xxxx represent address
723	723
724		-Connect with PLC and choose to “online” mode
	892	+**Such as:**
725	725
	894	+* DBxDBB20000 = DB2.DBB0
	895	+* DBxDBW20004 = DB2.DBW4
	896	+
726	726	(% style="text-align:center" %)
727		-[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	898	+[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
728	728
729		-Open I/O monitor sheet1
	900	+**How to connect with S7-1200 Firmware V4.0**
730	730
731		-(% style="text-align:center" %)
732		-[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	902	+PLC configuration
733	733
734		-During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	904	+* Double click [device configuration] in Siemens via software
	905	+* Double click [protection] to enter protection configuration screen
735	735
736	736	(% style="text-align:center" %)
737		-[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	908	+[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
738	738
739		-Enter the register address, click OK to view the value of the register.
	910	+* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
740	740
741	741	(% style="text-align:center" %)
742		-[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	913	+[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
743	743
744		-(% style="text-align:center" %)
745		-[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	915	+DB settings
746	746
747		-**✎Note:**
	917	+* Right click [DB], select [properties]
	918	+* Uncheck [optimized block access]
748	748
749		-* Both word registers and bit registers support even continuous read/write functions;
750		-* The range of registers is based on the specific PLC type;
751		-
752	752	**Cable Wiring**
753	753
754	754	(% style="text-align:center" %)
755	755	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
756	756
757		-= **IEC60870-5 104 Client** =
	925	+== **S7-XXX Ethernet Protocol** ==
758	758
	927	+Supported Series: Siemens S7-400, S7-1200 and S7-1500
	928	+
759	759	**HMI Setting**
760	760
761		-(% class="table-bordered" %)
762		-|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
763		-|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
764		-|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
765		-|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	931	+(% class="table-bordered" style="width:823px" %)
	932	+|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
	933	+|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
	934	+|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
	935	+|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
	936	+|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
	937	+|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
766	766
	939	+Slot from TIA Portal is equal to Device No. of PIStudio
	940	+
	941	+Rack from TIA Portal is equal to HMI No. of PIStudio
	942	+
	943	+(% style="text-align:center" %)
	944	+[[image:S7-XXXCommunication Settings.png]]
	945	+
	946	+(% style="text-align:center" %)
	947	+[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
	948	+
767	767	**Address List**
768	768
769	769	(% class="table-bordered" %)
770		-|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
771		-|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
772		-|(% style="width:461px" %)SCNA|0~~16777215.7
773		-|(% style="width:461px" %)DPTB|0~~16777215.7
774		-|(% style="width:461px" %)DCNA|0~~16777215.7
775		-|(% style="width:461px" %)METF|0~~16777215.7
776		-|(% style="width:461px" %)SENC|0~~16777215.7
777		-|(% style="width:461px" %)SENA|0~~16777215.7
778		-|(% style="width:461px" %)MENA|0~~16777215.7
779		-|(% style="width:461px" %)METD|0~~16777215.7
780		-|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
781		-|(% style="width:461px" %)SCNA|0~~16777215
782		-|(% style="width:461px" %)DPTB|0~~16777215
783		-|(% style="width:461px" %)DCNA|0~~16777215
784		-|(% style="width:461px" %)SENA|0~~16777215
785		-|(% style="width:461px" %)MENA|0~~16777215
786		-|(% style="width:461px" %)METD|0~~16777215
787		-|(% style="width:461px" %)INRO|0~~16777215
788		-|(% style="width:461px" %)TIMESYN|0~~16777215
789		-|(% style="width:461px" %)TIMEZ|0~~16777215
790		-|(% style="width:461px" %)NTP|0~~16777215
791		-|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
792		-|(% style="width:461px" %)SENC|0~~16777215
	952	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	953	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	954	+d:0~-~-9999
793	793
794		-**Address Configuration**
	956	+o:0-7
	957	+)))|
	958	+|Q|Q|Q d.o|(((
	959	+d:0~-~-9999
795	795
796		-The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	961	+o:0-7
	962	+)))|
	963	+|M|M|M d.o|(((
	964	+d:0~-~-9999
797	797
798		-(% style="text-align:center" %)
799		-[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	966	+o:0-7
	967	+)))|
	968	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	969	+nn:0-9999,
800	800
801		-(% style="text-align:center" %)
802		-[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	971	+dddd:0-9999,
803	803
804		-Extended tag name
	973	+o:0-7
	974	+)))|(((
	975	+nn:DB No.
805	805
806		-Address range for the extended tag.
	977	+dddd:address value
807	807
	979	+o: digit address
	980	+)))
	981	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	982	+|M|MW|MW d|d:0-99999|(((
	983	+MW0=MB(0~~1)
	984	+
	985	+MW2=MB(2~~3)
	986	+
	987	+Address value is a multiple of 2
	988	+)))
	989	+|M|MD|MD d|d:0-99999|(((
	990	+MD0=MB(0~~3)
	991	+
	992	+MD4=MB(4~~7)
	993	+
	994	+Address value is a multiple of 4
	995	+)))
	996	+|I|IW|IW d|d:0-99999|
	997	+|Q|QW|QW d|d:0-99999|
	998	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	999	+nn:0-9999
	1000	+
	1001	+dddd:0-9999
	1002	+)))|(((
	1003	+nn:DB No.
	1004	+
	1005	+dddd:address value
	1006	+)))
	1007	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	1008	+nn:0-9999
	1009	+
	1010	+dddd:0-9999
	1011	+)))|(((
	1012	+nn:DB No.
	1013	+
	1014	+dddd:address value
	1015	+
	1016	+Address value is a multiple of 2
	1017	+)))
	1018	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	1019	+nn:0-9999
	1020	+
	1021	+dddd:0-9999
	1022	+)))|(((
	1023	+nn:DB No.
	1024	+
	1025	+dddd:address value
	1026	+
	1027	+Address value is a multiple of 4
	1028	+)))
	1029	+
808	808	**Communication Settings**
809	809
810	810	Enable HMI Ethernet in [Project Settings];
811	811
812	812	(% style="text-align:center" %)
813		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1035	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
814	814
815	815	Set PLC IP in [Device IP] settings;
816	816
817	817	(% style="text-align:center" %)
818		-[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	1040	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
819	819
	1042	+**✎Note:**
	1043	+
	1044	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	1045	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	1046	+
820	820	**Cable Wiring**
821	821
822		-(% style="text-align:center" %)
823		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1049	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
824	824
825		-= **LG XGK FEnet Ethernet** =
	1051	+== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet Protocol** ==
826	826
827		-Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	1053	+Supported Series: Siemens Logo 0BA0 series
828	828
829	829	**HMI Settings**
830	830
831	831	(% class="table-bordered" %)
832	832	|**Items**|**Settings**|**Note**
833		-|Protocol|LG XGK FEnet(Ethernet)|
	1059	+|Protocol|Siemens LOGO|
834	834	|Connection|Ethernet|
835		-|Port No.|2004|
	1061	+|Port No.|102|
	1062	+|PLC station No.|2|
836	836
837	837	**Address List**
838	838
839	839	(% class="table-bordered" %)
840		-|**Type**|**Register**|**Range**|**Format**|**Note**
841		-|(% rowspan="14" %)Word|P|0~~2047|P d|
842		-|M|0~~2047|M d|
843		-|K|0~~2047|K d|
844		-|F|0~~2047|F d|
845		-|T|0~~2047|T d|
846		-|C|0~~2047|C d|
847		-|Z|0~~127|Z d|
848		-|S|0~~127|S d|
849		-|L|0~~11263|L d|
850		-|N|0~~21503|N d|
851		-|D|0~~32767|D d|
852		-|R|0~~32767|R d|
853		-|ZR|0~~65535|ZR d|
854		-|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	1067	+|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
	1068	+|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
	1069	+|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
	1070	+|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
	1071	+|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
	1072	+|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
	1073	+|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
	1074	+|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
	1075	+|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
	1076	+|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
	1077	+|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
	1078	+|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
	1079	+|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
	1080	+|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
	1081	+|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
	1082	+|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
855	855
856		-**✎Note:**
	1084	+**PLC Settings in LOGO Software:**
857	857
858		-* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
859		-* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
860		-* All bit registers are in the form of bits in word, and the range is the same as the word register;
	1086	+Click [Tools]~-~-[Ethernet Connections],shown as below.
861	861
862		-**Communication settings in HMI**
	1088	+(% style="text-align:center" %)
	1089	+[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
863	863
864		-Enable HMI Ethernet in [Project Settings];
	1091	+Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
865	865
866	866	(% style="text-align:center" %)
867		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1094	+[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
868	868
	1096	+**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
	1097	+
	1098	+(% style="text-align:center" %)
	1099	+[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
	1100	+
	1101	+**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	1102	+
	1103	+(% style="text-align:center" %)
	1104	+[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
	1105	+
	1106	+
	1107	+(% style="text-align:center" %)
	1108	+[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
	1109	+
	1110	+
	1111	+**HMI Communication Settings**
	1112	+
869	869	Set PLC IP in [Device IP] settings;
870	870
871	871	(% style="text-align:center" %)
872		-[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	1116	+[[image:SiemensLOGODeviceIP.png]]
873	873
	1118	+Enable HMI Ethernet in [Project Settings];
	1119	+
	1120	+(% style="text-align:center" %)
	1121	+[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
	1122	+
	1123	+TSAP setting
	1124	+
	1125	+* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
	1126	+* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
	1127	+* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
	1128	+
	1129	+**✎Note:**
	1130	+
	1131	+* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
	1132	+
	1133	+(% style="text-align:center" %)
	1134	+[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
	1135	+
	1136	+
	1137	+* AI word address and Ibit address are read-only and cannot be written on HMI.
	1138	+* VW address should be even number.such as VW0, VW2, VW4...
	1139	+* VD address it takes two VW addresses.such as VD0,VD4,VD8...
	1140	+* Written value of RTC cannot exceed 255.
	1141	+
874	874	**Cable Wiring**
875	875
876		-= **Mitsubishi** =
	1144	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
877	877
878		-== **FX1S, 1N, 2N Series** ==
	1146	+= Create communication with **Mitsubishi PLC** =
879	879
	1148	+== **FX1S, 1N, 2N Series Protocol** ==
	1149	+
880	880	Supported Series: Mitsubishi FX1S, FX1N, FX2N series
881	881
882	882	**HMI Settings**
...	...	@@ -928,7 +928,7 @@
928	928
929	929	**✎Note:** COM3 only available in PI8000/PI9000 series.
930	930
931		-== **FX5U Ethernet** ==
	1201	+== **FX5U Ethernet Protocol** ==
932	932
933	933	Mitsubishi FX5U series PLC
934	934
...	...	@@ -1007,7 +1007,7 @@
1007	1007	(% style="text-align:center" %)
1008	1008	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1009	1009
1010		-== **FX5U Serial Port** ==
	1280	+== **FX5U Serial Port Protocol** ==
1011	1011
1012	1012	Mitsubishi FX5U series PLC
1013	1013
...	...	@@ -1099,7 +1099,7 @@
1099	1099
1100	1100	**✎Note:** COM3 only available in PI8000/PI9000 series.
1101	1101
1102		-== **L02 MELSEC (Ethernet)** ==
	1372	+== **L02 MELSEC (Ethernet) Protocol** ==
1103	1103
1104	1104	Mitsubishi Q series CPU built-in Ethernet port.
1105	1105
...	...	@@ -1184,7 +1184,7 @@
1184	1184	(% style="text-align:center" %)
1185	1185	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1186	1186
1187		-== **QJ71E71 MELSEC** ==
	1457	+== **QJ71E71 MELSEC Protocol** ==
1188	1188
1189	1189	Mitsubishi QJ71E71 Ethernet communication module;
1190	1190
...	...	@@ -1264,219 +1264,200 @@
1264	1264	(% style="text-align:center" %)
1265	1265	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1266	1266
1267		-= **MODBUS** =
	1537	+= Create communication with **Delta PLC** =
1268	1268
1269		-== **MODBUS RTU Master** ==
	1539	+== **DVP serial protocol** ==
1270	1270
1271		-Supported Series: MODBUS RTU CONTROLLER
	1541	+(% class="wikigeneratedid" %)
	1542	+Supported Series: Delta DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX Controller
1272	1272
1273		-HMI works as MODBUS SLAVE connecting with MASTER
	1544	+**1）HMI Settings**
1274	1274
1275		-(% style="text-align:center" %)
1276		-[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1546	+|**Item**|**Settings**|**Note**
	1547	+|Protocol|DELTA DVP Series|
	1548	+|Connection|RS485|
	1549	+|Baud rate|9600|
	1550	+|Data bit|7|
	1551	+|Parity|Even|
	1552	+|Stop bit|1|
	1553	+|PLC station No.|1~~255|Need to be the same as PLC settings
1277	1277
	1555	+**2）Address List**
1278	1278
1279		-(% style="text-align:center" %)
1280		-[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1557	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1558	+|Bit|X|X|X d|0~~303237|
	1559	+|Bit|Y|Y|Y d|0~~303237|
	1560	+|Bit|M|M|M d|0~~99999|
	1561	+|Bit|T|T|T d|0~~99999|
	1562	+|Bit|C|C|T d|0~~99999|
	1563	+|Bit|S|S|T d|0~~99999|
	1564	+|Word|D|D|D d|0~~99999|
	1565	+|Word|T|T|T d|0~~99999|
	1566	+|Word|C|C|C d|0~~99999|
1281	1281
	1568	+(% class="wikigeneratedid" %)
	1569	+**3）Configure the communication protocol**
1282	1282
1283		-(% style="text-align:center" %)
1284		-[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1571	+(% class="wikigeneratedid" %)
	1572	+[[image:image-20220829152327-6.png]]
1285	1285
1286		-**HMI Settings**
	1574	+(% class="wikigeneratedid" %)
	1575	+[[image:image-20220829152016-3.png]]
1287	1287
1288		-(% class="table-bordered" %)
1289		-|**Items**|**Settings**|**Note**
1290		-|Protocol|MODBUS RTU Master|
1291		-|Connection|RS485/RS232|
1292		-|Baud rate|2400~~187500|
1293		-|Data bit|8|
1294		-|Parity|Even/ Odd/ None|
1295		-|Stop bit|1/2|
1296		-|Station No.|0~~255|
	1577	+(% class="wikigeneratedid" %)
	1578	+**4）Cable Wiring**
1297	1297
1298		-**Address List**
	1580	+(% class="wikigeneratedid" id="H" %)
	1581	+[[image:image-20220829152610-7.png]]
1299	1299
1300		-(% class="table-bordered" %)
1301		-|**Type**|**HMI address**|**MODBUS code**|**Range**
1302		-|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
1303		-|Word|HDW3500~~HDW7999|4|0~~4499
	1583	+(% class="wikigeneratedid" id="H" %)
	1584	+[[image:image-20220829152102-5.png]]
1304	1304
1305		-**Cable Wiring**
1306	1306
1307		-* **RS485**
	1587	+== **DVP Ethernet Protocol** ==
1308	1308
1309		-(% style="text-align:center" %)
1310		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1589	+(% class="wikigeneratedid" %)
	1590	+Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
1311	1311
1312		-(% style="text-align:center" %)
1313		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1592	+**1）HMI Settings**
1314	1314
1315		-* **RS232**
	1594	+|**Items**|**Settings**|**Note**
	1595	+|Protocol|DELTA DVP Modbus TCP|
	1596	+|Connection|Ethernet|
	1597	+|Port No.|201|Must be the same as the PLC setting
	1598	+|PLC station No.|0|Must be the same as the PLC setting
1316	1316
1317		-(% style="text-align:center" %)
1318		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	1600	+**2）Address List**
1319	1319
1320		-**✎Note:** COM3 only available in PI8000/PI9000 series.
	1602	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1603	+|Bit|X|X|X o|0~~377|
	1604	+|Bit|Y|Y|Y o|0~~377|
	1605	+|Bit|M0|M0|M0 d|0~~1535|
	1606	+|Bit|M1|M1|M1 d|1536~~4095|
	1607	+|Bit|T|T|T d|0~~255|
	1608	+|Bit|C|C|C d|0~~255|
	1609	+|Bit|S|S|S d|0~~1023|
	1610	+|Word|D0|D0|D0 d|0~~4095|
	1611	+|Word|D1|D1|D1 d|4096~~11999|(((
	1612	+
	1613	+)))
	1614	+|Word|T|T|T d|0~~255|
	1615	+|Word|C|C|C d|0~~199|(((
	1616	+
	1617	+)))
1321	1321
1322		-== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
	1619	+(% class="wikigeneratedid" %)
	1620	+**3）Configure the communication protocol**
1323	1323
1324		-Supported Series: MODBUS RTU CONTROLLER
	1622	+[[image:image-20220829155452-1.png]]
1325	1325
1326		-HMI works as MODBUS MASTER connecting with SLAVE.
	1624	+[[image:image-20220829162116-2.png]]
1327	1327
1328		-The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
	1626	+**4）Cable Wiring**
1329	1329
1330		-(% style="text-align:center" %)
1331		-[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
	1628	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1332	1332
	1630	+== **AS serial protocol** ==
1333	1333
1334		-(% style="text-align:center" %)
1335		-[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1632	+**1）HMI Settings**
1336	1336
1337		-
1338		-(% style="text-align:center" %)
1339		-[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1340		-
1341		-**HMI Settings**
1342		-
1343		-(% class="table-bordered" %)
1344		-|**Items**|**Settings**|**Note**
1345		-|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
1346		-|Connection|RS485/RS232|
1347		-|Baud rate|2400~~187500|
	1634	+|**Item**|**Settings**|**Note**
	1635	+|Protocol|DELTA AS300 MODBUS RTU|
	1636	+|Connection|RS485|
	1637	+|Baud rate|9600|
1348	1348	|Data bit|8|
1349		-|Parity|Even/ Odd/ None|
1350		-|Stop bit|1/2|
1351		-|PLC station No.|0~~255|
	1639	+|Parity|NONE|
	1640	+|Stop bit|1|
	1641	+|PLC station No.|1|
1352	1352
1353		-**Address List**
	1643	+**2）Address List**
1354	1354
1355		-(% class="table-bordered" %)
1356		-|**Type**|**Address Type**|**Function code & Description**
1357		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
1358		-|06 (write single register: write a binary value to a holding register)
1359		-|10 (write values to multiple addresses )
1360		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
1361		-|06 (write single register: write a binary value to a holding register)
1362		-|10 (write values to multiple addresses )
1363		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
1364		-|06 (write single register: write a binary value to a holding register)
1365		-|10 (write values to multiple addresses )
1366		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
1367		-|10 (write values to multiple addresses )
1368		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
1369		-|05 (Force a single coil to force the on/off state of a logic coil)
1370		-|0F (Write multiple bits, ie write continuously)
1371		-|(% rowspan="3" %)1|02 (Read the input state)
1372		-|05 (Force a single coil to force the on/off state of a logic coil)
1373		-|0F (Write multiple bits)
1374		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
1375		-|05 (Force a single coil to force the on/off state of a logic coil)
1376		-|0F (Write multiple bits)
1377		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1378		-|0F (Write multiple bits)
1379	1379
1380		-**✎Note:**
	1646	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1647	+|Bit|X|X|X d|0~~63|
	1648	+|Bit|Y|Y|Y d|0~~63|
	1649	+|Bit|D|D|D d|0~~29999|
	1650	+|Bit|M|M|M d|0~~8191|
	1651	+|Bit|SM|SM|SM d|0~~4095|
	1652	+|Bit|S|S|S h|0~~2047|
	1653	+|Bit|T|T|T d|0~~511|
	1654	+|Bit|C|C|C d|0~~511|
	1655	+|Bit|HC|HC|HC d|0~~255|
	1656	+|Word|X|X|X h|0~~63|
	1657	+|Word|Y|Y|Y d|0~~63|
	1658	+|Word|SR|SR|SR d|0~~2047|
	1659	+|Word|D|D|D d|0~~29999|
	1660	+|Word|T|T|T d|0~~511|
	1661	+|Word|C|C|C h|0~~511|
	1662	+|Word|E|E|E d|0~~9|
1381	1381
1382		-* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
1383		-* The function codes sent out are the same as those that read and write words.
	1664	+**3）Configure the communication protocol**
1384	1384
1385		-**Station number for more than one slaves**
	1666	+[[image:image-20220830094600-1.png]]
1386	1386
1387		-If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
	1668	+[[image:image-20220830094657-2.png]]
1388	1388
1389		-(% style="text-align:center" %)
1390		-[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
	1670	+**4）Cable Wiring**
1391	1391
1392		-**Cable Wiring**
	1672	+Figure
1393	1393
1394		-* **RS485**
	1674	+[[image:image-20220830141138-1.png]]
1395	1395
1396		-(% style="text-align:center" %)
1397		-[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1676	+Pin Definition Diagram
1398	1398
1399		-(% style="text-align:center" %)
1400		-[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
	1678	+[[image:image-20220830095131-1.png]]
1401	1401
1402		-* **RS232**
	1680	+== **AS Ethernet Protocol** ==
1403	1403
1404		-(% style="text-align:center" %)
1405		-[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
	1682	+**1）HMI Settings**
1406	1406
1407		-**✎Note:** COM3 only available in PI8000/PI9000 series.
1408	1408
1409		-== **MODBUS TCP Slave (All function)** ==
1410		-
1411		-Supported series: MODBUS TCP controller
1412		-
1413		-HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
1414		-
1415		-(% style="text-align:center" %)
1416		-[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1417		-
1418		-(% style="text-align:center" %)
1419		-[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
1420		-
1421		-
1422		-(% style="text-align:center" %)
1423		-[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
1424		-
1425		-**HMI Setting**
1426		-
1427		-(% class="table-bordered" %)
1428		-|**Items**|**Settings**|**Note**
1429		-|Protocol|MODBUS TCP Slave (All function)|
	1685	+|=**Items**|=**Settings**|=**Note**
	1686	+|Protocol|DELTA AS300 MODBUS TCP|
1430	1430	|Connection|Ethernet|
1431	1431	|Port No.|502|
1432		-|PLC station No.|1|
	1689	+|Device No.|1|
	1690	+|HMI No.|0|
1433	1433
1434		-**Address List**
	1692	+**2）Address List**
1435	1435
1436		-(% class="table-bordered" %)
1437		-|**Type**|**Register**|**Function code & Description**
1438		-|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
1439		-|06 (write single register: write a binary value to a holding register)
1440		-|10 (write values to multiple addresses )
1441		-|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
1442		-|06 (write single register: write a binary value to a holding register)
1443		-|10 (write values to multiple addresses )
1444		-|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
1445		-|06 (write single register: write a binary value to a holding register)
1446		-|10 (write values to multiple addresses )
1447		-|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
1448		-|10 (write values to multiple addresses )
1449		-|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
1450		-|05 (Force a single coil to force the on/off state of a logic coil)
1451		-|0F (Write multiple bits, ie write continuously)
1452		-|(% rowspan="3" %)1|02 (Read the input state)
1453		-|05 (Force a single coil to force the on/off state of a logic coil)
1454		-|0F (Write multiple bits)
1455		-|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
1456		-|05 (Force a single coil to force the on/off state of a logic coil)
1457		-|0F (Write multiple bits)
1458		-|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1459		-|0F (Write multiple bits)
1460	1460
1461		-**Communication Settings**
	1695	+|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
	1696	+|Bit|X|X|X d|0~~63|
	1697	+|Bit|Y|Y|Y d|0~~63|
	1698	+|Bit|D|D|D d|0~~29999|
	1699	+|Bit|M|M|M d|0~~8191|
	1700	+|Bit|SM|SM|SM d|0~~4095|
	1701	+|Bit|S|S|S h|0~~2047|
	1702	+|Bit|T|T|T d|0~~511|
	1703	+|Bit|C|C|C d|0~~511|
	1704	+|Bit|HC|HC|HC d|0~~255|
	1705	+|Word|X|X|X h|0~~63|
	1706	+|Word|Y|Y|Y d|0~~63|
	1707	+|Word|SR|SR|SR d|0~~2047|
	1708	+|Word|D|D|D d|0~~29999|
	1709	+|Word|T|T|T d|0~~511|
	1710	+|Word|C|C|C h|0~~511|
	1711	+|Word|E|E|E d|0~~9|
1462	1462
1463		-Enable HMI Ethernet in [Project Settings];
	1713	+**3）Configure the communication protocol**
1464	1464
1465		-(% style="text-align:center" %)
1466		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1715	+[[image:image-20220830140537-1.png]]
1467	1467
1468		-Set PLC IP in [Device IP] settings;
	1717	+[[image:image-20220830140629-2.png]]
1469	1469
1470		-(% style="text-align:center" %)
1471		-[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	1719	+**4）Cable Wiring**
1472	1472
1473		-**Cable Wiring**
	1721	+Figure
1474	1474
1475		-(% style="text-align:center" %)
1476		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1723	+[[image:image-20220830094929-1.png]]
1477	1477
1478		-= **Omron** =
	1725	+Pin Definition Diagram
1479	1479
	1727	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1728	+
	1729	+= Create communication with **Omron** PLC =
	1730	+
1480	1480	== **EC55** ==
1481	1481
1482	1482	Supported device: EC55 temperature instrument
...	...	@@ -1483,7 +1483,6 @@
1483	1483
1484	1484	**HMI Settings**
1485	1485
1486		-(% class="table-bordered" %)
1487	1487	|**Items**|**Settings**|**Note**
1488	1488	|Protocol|Omron EC55|
1489	1489	|Connection|RS485 (9600, 2, 7, EVEN)|
...	...	@@ -1492,7 +1492,6 @@
1492	1492
1493	1493	**Address List**
1494	1494
1495		-(% class="table-bordered" %)
1496	1496	|**Type**|**Register**|**Device range**|**HMI range**|**Function**
1497	1497	|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
1498	1498	|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
...	...	@@ -1538,7 +1538,7 @@
1538	1538	* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
1539	1539	* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
1540	1540	* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
1541		-* (% id="cke_bm_8690S" style="display:none" %)[[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]](%%)Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
	1790	+* [[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
1542	1542
1543	1543	== EtherNet/IP NX series ==
1544	1544
...	...	@@ -1546,7 +1546,6 @@
1546	1546
1547	1547	**HMI Setting**
1548	1548
1549		-(% class="table-bordered" %)
1550	1550	|**Items**|**Settings**|**Note**
1551	1551	|Protocol|Omron NX Ethernet/IP|
1552	1552	|Connection|Ethernet|
...	...	@@ -1598,183 +1598,224 @@
1598	1598	(% style="text-align:center" %)
1599	1599	[[image:12.PLC Protocol_html_437cb087b36b5784.png||data-xwiki-image-style-alignment="center" height="330" width="600" class="img-thumbnail"]]
1600	1600
1601		-
1602	1602	(% style="text-align:center" %)
1603	1603	[[image:12.PLC Protocol_html_60ef71528a99abf5.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
1604	1604
1605	1605	**Cable Wiring**
1606	1606
	1854	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	1855	+
	1856	+= **MODBUS** =
	1857	+
	1858	+== **MODBUS RTU Master** ==
	1859	+
	1860	+Supported Series: MODBUS RTU CONTROLLER
	1861	+
	1862	+HMI works as MODBUS SLAVE connecting with MASTER
	1863	+
1607	1607	(% style="text-align:center" %)
1608		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1865	+[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1609	1609
1610		-= **OpenCAN** =
1611	1611
1612		-OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
	1868	+(% style="text-align:center" %)
	1869	+[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1613	1613
1614		-This protocol is only available in PI8000 series HMI.
1615	1615
	1872	+(% style="text-align:center" %)
	1873	+[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
	1874	+
1616	1616	**HMI Settings**
1617	1617
1618	1618	(% class="table-bordered" %)
1619	1619	|**Items**|**Settings**|**Note**
1620		-|Protocol|OPENCAN|
1621		-|Connection|CAN port|
1622		-|Baud rate|250000|
	1879	+|Protocol|MODBUS RTU Master|
	1880	+|Connection|RS485/RS232|
	1881	+|Baud rate|2400~~187500|
	1882	+|Data bit|8|
	1883	+|Parity|Even/ Odd/ None|
	1884	+|Stop bit|1/2|
	1885	+|Station No.|0~~255|
1623	1623
1624		-**CAN frame setting in HMI**
	1887	+**Address List**
1625	1625
1626		-Click [OpenCAN setting] button in communication setting window;
	1889	+(% class="table-bordered" %)
	1890	+|**Type**|**HMI address**|**MODBUS code**|**Range**
	1891	+|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
	1892	+|Word|HDW3500~~HDW7999|4|0~~4499
1627	1627
1628		-(% style="text-align:center" %)
1629		-[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
	1894	+**Cable Wiring**
1630	1630
1631		-Click [Add] to create a new frame;
	1896	+* **RS485**
1632	1632
1633	1633	(% style="text-align:center" %)
1634		-[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
	1899	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1635	1635
1636		-(% class="table-bordered" %)
1637		-|**No**|**Items**|**Description**
1638		-|1|Add|add a frame related to register address
1639		-|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
1640		-|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
1641		-|4|Modify|Modify the frames in frame management
1642		-|5|Copy|Copy one frame to another
1643		-|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
1644		-|7|Empty|All frames in the list are cleared
1645		-|8|Browse|Displays configuration files in XML format in IE
1646		-|9|OK|Complete the configuration of the frame and exit
	1901	+(% style="text-align:center" %)
	1902	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1647	1647
1648		-Set CANBUS frame in setting windows
	1904	+* **RS232**
1649	1649
1650	1650	(% style="text-align:center" %)
1651		-[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
	1907	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
1652	1652
1653		-(% class="table-bordered" %)
1654		-|**No**|(% style="width:185px" %)**Items**|(% style="width:854px" %)**Description**
1655		-|1|(% style="width:185px" %)ID|(% style="width:854px" %)Set the ID of a can frame in hexadecimal format;
1656		-|2|(% style="width:185px" %)ID assign|(% style="width:854px" %)split the ID by PF, PS, and SA;
1657		-|3|(% style="width:185px" %)Frame type|(% style="width:854px" %)Select Standard frame or Extended Frame;
1658		-|4|(% style="width:185px" %)Frame format|(% style="width:854px" %)Select between data frame and remote Frame;
1659		-|5|(% style="width:185px" %)Data|(% style="width:854px" %)Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
1660		-|6|(% style="width:185px" %)Use address|(% style="width:854px" %)(((
1661		-Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
	1909	+**✎Note:** COM3 only available in PI8000/PI9000 series.
1662	1662
1663		-**Edit:** Set a bit or word address by its format;
	1911	+== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
1664	1664
1665		-**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
1666		-)))
1667		-|(% rowspan="8" %)7|(% rowspan="8" style="width:185px" %)Data interactive configuration|(% style="width:854px" %)There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
1668		-|(% style="width:854px" %)Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
1669		-|(% style="width:854px" %)Feedback mode: feedback mode includes no response, confirm response and data response;
1670		-|(% style="width:854px" %)No response: the device or touch screen will not receive feedback;
1671		-|(% style="width:854px" %)Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
1672		-|(% style="width:854px" %)Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
1673		-|(% style="width:854px" %)response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
1674		-|(% style="width:854px" %)Response timeout: sets whether the response frame timeout;
1675		-|(% rowspan="3" %)8|(% rowspan="3" style="width:185px" %)Control address|(% style="width:854px" %)If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
1676		-|(% style="width:854px" %)Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
1677		-|(% style="width:854px" %)Manually send: a manually send tick indicates only one send;
1678		-|9|(% style="width:185px" %)Flag configuration|(% style="width:854px" %)Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
1679		-|10|(% style="width:185px" %)Note|(% style="width:854px" %)Fill the text to explain the meaning of the frame;
1680		-|11|(% style="width:185px" %)Data assign|(% style="width:854px" %)Preview the display in this table based on the address and the corresponding number of digits;
1681		-|12|(% style="width:185px" %)Current operation display|(% style="width:854px" %)Display the description of current operation;
1682		-|13|(% style="width:185px" %)Add|(% style="width:854px" %)Add a new frame;
1683		-|14|(% style="width:185px" %)Save frame|(% style="width:854px" %)Save the configured frame format;
1684		-|15|(% style="width:185px" %)Cancel|(% style="width:854px" %)Cancel the frame configuration;
	1913	+Supported Series: MODBUS RTU CONTROLLER
1685	1685
1686		-Set CAN address (Read or write operation);
	1915	+HMI works as MODBUS MASTER connecting with SLAVE.
1687	1687
	1917	+The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
	1918	+
1688	1688	(% style="text-align:center" %)
1689		-[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
	1920	+[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1690	1690
1691		-(% class="table-bordered" %)
1692		-|**No.**|(% style="width:207px" %)**Item**|(% style="width:829px" %)**Description**
1693		-|1|(% style="width:207px" %)Current address|(% style="width:829px" %)Displays the register type and register address set by the user in the data access interface
1694		-|(% rowspan="3" %)2|(% rowspan="3" style="width:207px" %)Trigger|(% style="width:829px" %)Two operations, "read" and "write," are based on on-screen registers
1695		-|(% style="width:829px" %)If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
1696		-|(% style="width:829px" %)If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
1697		-|(% rowspan="5" %)3|(% rowspan="3" style="width:207px" %)Data operation|(% style="width:829px" %)The read and write operations in the trigger conditions are set accordingly.
1698		-|(% style="width:829px" %)If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
1699		-|(% style="width:829px" %)If the trigger condition is a writing operation, there are two situations:(((
1700		-* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
1701		-* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
1702		-)))
1703		-|(% rowspan="2" style="width:207px" %)Position and length input format|(% style="width:829px" %)If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
1704		-|(% style="width:829px" %)If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
1705		-|4|(% style="width:207px" %)Add|(% style="width:829px" %)Add current configuration
1706		-|5|(% style="width:207px" %)Close|(% style="width:829px" %)Close the configuration window to exit
1707	1707
1708		-**Multiple Packages Settings**
	1923	+(% style="text-align:center" %)
	1924	+[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1709	1709
	1926	+
1710	1710	(% style="text-align:center" %)
1711		-[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
	1928	+[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
1712	1712
1713		-Check [Multiple packages supported] to open [Multiple package data] window, as below show.
	1930	+**HMI Settings**
1714	1714
1715		-Select Multiple package type
	1932	+(% class="table-bordered" %)
	1933	+|**Items**|**Settings**|**Note**
	1934	+|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
	1935	+|Connection|RS485/RS232|
	1936	+|Baud rate|2400~~187500|
	1937	+|Data bit|8|
	1938	+|Parity|Even/ Odd/ None|
	1939	+|Stop bit|1/2|
	1940	+|PLC station No.|0~~255|
1716	1716
1717		-* Not Multiple packages
1718		-* J1939 Multiple packages
1719		-* Customized Multiple packages
	1942	+**Address List**
1720	1720
1721		-Click [Edit Receive data] for [Receive] settings
	1944	+(% class="table-bordered" %)
	1945	+|**Type**|**Address Type**|**Function code & Description**
	1946	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	1947	+|06 (write single register: write a binary value to a holding register)
	1948	+|10 (write values to multiple addresses )
	1949	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	1950	+|06 (write single register: write a binary value to a holding register)
	1951	+|10 (write values to multiple addresses )
	1952	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	1953	+|06 (write single register: write a binary value to a holding register)
	1954	+|10 (write values to multiple addresses )
	1955	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	1956	+|10 (write values to multiple addresses )
	1957	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	1958	+|05 (Force a single coil to force the on/off state of a logic coil)
	1959	+|0F (Write multiple bits, ie write continuously)
	1960	+|(% rowspan="3" %)1|02 (Read the input state)
	1961	+|05 (Force a single coil to force the on/off state of a logic coil)
	1962	+|0F (Write multiple bits)
	1963	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	1964	+|05 (Force a single coil to force the on/off state of a logic coil)
	1965	+|0F (Write multiple bits)
	1966	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	1967	+|0F (Write multiple bits)
1722	1722
1723		-* Start code+ Total length (J1939)
	1969	+**✎Note:**
1724	1724
1725		-(% style="text-align:center" %)
1726		-[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1971	+* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
	1972	+* The function codes sent out are the same as those that read and write words.
1727	1727
1728		-As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
	1974	+**Station number for more than one slaves**
1729	1729
1730		-* Start code + Data max length (J1939)
	1976	+If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
1731	1731
1732	1732	(% style="text-align:center" %)
1733		-[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1979	+[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
1734	1734
1735		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
	1981	+**Cable Wiring**
1736	1736
1737		-* Data max length (J1939)
	1983	+* **RS485**
1738	1738
1739	1739	(% style="text-align:center" %)
1740		-[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	1986	+[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1741	1741
1742		-As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
	1988	+(% style="text-align:center" %)
	1989	+[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
1743	1743
1744		-* Customized multiple package
	1991	+* **RS232**
1745	1745
1746	1746	(% style="text-align:center" %)
1747		-[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
	1994	+[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
1748	1748
1749		-As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
	1996	+**✎Note:** COM3 only available in PI8000/PI9000 series.
1750	1750
1751		-Click [Edit Send data] for [Send] setting
	1998	+== **MODBUS TCP Slave (All function)** ==
1752	1752
1753		-* J1939
	2000	+Supported series: MODBUS TCP controller
1754	1754
	2002	+HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
	2003	+
1755	1755	(% style="text-align:center" %)
1756		-[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
	2005	+[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
1757	1757
1758		-[Data] is all data to be sent.
	2007	+(% style="text-align:center" %)
	2008	+[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
1759	1759
1760		-Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
1761	1761
1762		-* Customized multiple package
	2011	+(% style="text-align:center" %)
	2012	+[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
1763	1763
	2014	+**HMI Setting**
	2015	+
	2016	+(% class="table-bordered" %)
	2017	+|**Items**|**Settings**|**Note**
	2018	+|Protocol|MODBUS TCP Slave (All function)|
	2019	+|Connection|Ethernet|
	2020	+|Port No.|502|
	2021	+|PLC station No.|1|
	2022	+
	2023	+**Address List**
	2024	+
	2025	+(% class="table-bordered" %)
	2026	+|**Type**|**Register**|**Function code & Description**
	2027	+|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
	2028	+|06 (write single register: write a binary value to a holding register)
	2029	+|10 (write values to multiple addresses )
	2030	+|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
	2031	+|06 (write single register: write a binary value to a holding register)
	2032	+|10 (write values to multiple addresses )
	2033	+|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
	2034	+|06 (write single register: write a binary value to a holding register)
	2035	+|10 (write values to multiple addresses )
	2036	+|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
	2037	+|10 (write values to multiple addresses )
	2038	+|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
	2039	+|05 (Force a single coil to force the on/off state of a logic coil)
	2040	+|0F (Write multiple bits, ie write continuously)
	2041	+|(% rowspan="3" %)1|02 (Read the input state)
	2042	+|05 (Force a single coil to force the on/off state of a logic coil)
	2043	+|0F (Write multiple bits)
	2044	+|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
	2045	+|05 (Force a single coil to force the on/off state of a logic coil)
	2046	+|0F (Write multiple bits)
	2047	+|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
	2048	+|0F (Write multiple bits)
	2049	+
	2050	+**Communication Settings**
	2051	+
	2052	+Enable HMI Ethernet in [Project Settings];
	2053	+
1764	1764	(% style="text-align:center" %)
1765		-[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
	2055	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
1766	1766
1767		-[Data] is all data to be sent.
	2057	+Set PLC IP in [Device IP] settings;
1768	1768
1769		-As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
	2059	+(% style="text-align:center" %)
	2060	+[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
1770	1770
1771	1771	**Cable Wiring**
1772	1772
1773	1773	(% style="text-align:center" %)
1774		-[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
	2065	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
1775	1775
1776		-**✎Note:** The address interval between each frame need to be more than a word address;
1777		-
1778	1778	= **SHIMADEN** =
1779	1779
1780	1780	== **FP23** ==
...	...	@@ -1949,559 +1949,6 @@
1949	1949
1950	1950	**✎Note:** COM3 only available in PI8000/PI9000 series.
1951	1951
1952		-= **Siemens** =
1953		-
1954		-== **S7-200 Smart Ethernet** ==
1955		-
1956		-Supported Series: Siemens S7-200 SMART Series Ethernet Module.
1957		-
1958		-Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
1959		-
1960		-**HMI Setting**
1961		-
1962		-(% class="table-bordered" %)
1963		-|**Items**|**Settings**|**Note**
1964		-|Protocol|Simens S7-200 Smart Ethernet|
1965		-|Connection|Ethernet|
1966		-|Port No.|102|
1967		-|PLC station No.|2|
1968		-
1969		-**Address List**
1970		-
1971		-(% class="table-bordered" %)
1972		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
1973		-|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
1974		-|Q|Q|Q ddddd.o|0.0~~99999.7|
1975		-|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
1976		-|V|V|V ddddd.o|0.0~~99999.7|
1977		-|M|M|M ddddd.o|0.0~~99999.7|
1978		-|SM|SM|ddddd.o|0.0~~99999.7|
1979		-|S|S|ddddd.o|0.0~~99999.7|Read only
1980		-|T|T|ddddd|0~~99999|Timer state, read only
1981		-|C|C|ddddd|0~~99999|Counter state, read only
1982		-|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
1983		-|Q|QW|QW ddddd|0~~99999|
1984		-|AI|AIW|AIW ddddd|0~~99999|
1985		-|AQ|VB|VB ddddd|0~~99999|
1986		-|V|VW|VW ddddd|0~~99998|(((
1987		-VW0=VB (0~~1)
1988		-
1989		-VW2=VB (2~~3)
1990		-
1991		-Address value is a multiple of 2
1992		-)))
1993		-|V|VD|VD ddddd|0~~99998|(((
1994		-VD0=VB (0~~3)
1995		-
1996		-VD2=VB (4~~7)
1997		-
1998		-Address value is a multiple of 4
1999		-)))
2000		-|M|MB|MB ddddd|0~~99999|
2001		-|M|MW|MW ddddd|0~~99999|(((
2002		-MW0=MB(0~~1)
2003		-
2004		-MW2=MB(2~~3)
2005		-
2006		-Address value is a multiple of 2
2007		-)))
2008		-|M|MD|MD ddddd|0~~99999|(((
2009		-MD0=MB(0~~3)
2010		-
2011		-MD4=MB(4~~7)
2012		-
2013		-Address value is a multiple of 4
2014		-)))
2015		-|T|TW|TW ddddd|0~~99999|Value of timer
2016		-|C|CW|CW ddddd|0~~99999|Value of counter
2017		-|W|SW|SW ddddd|0~~99999|
2018		-
2019		-**Communication Settings**
2020		-
2021		-Enable HMI Ethernet in [Project Settings];
2022		-
2023		-(% style="text-align:center" %)
2024		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2025		-
2026		-Set PLC IP in [Device IP] settings;
2027		-
2028		-(% style="text-align:center" %)
2029		-[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
2030		-
2031		-* PLC IP Address: PLC IP
2032		-* PLC pot No.: 102(fixed)
2033		-* Network:TCP_Client_2N(fixed)
2034		-
2035		-(% style="text-align:center" %)
2036		-[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
2037		-
2038		-* Wait timeout: depend on actual network situation (more than 1500 ms)
2039		-
2040		-**Cable Wiring**
2041		-
2042		-(% style="text-align:center" %)
2043		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2044		-
2045		-== **S7-300 Ethernet** ==
2046		-
2047		-Supported Series: Siemens S7-300 series PLC
2048		-
2049		-**HMI Setting**
2050		-
2051		-(% class="table-bordered" %)
2052		-|**Items**|**Settings**|**Note**
2053		-|Protocol|Simens S7-300 Ethernet|
2054		-|Connection|Ethernet|
2055		-|Port No.|102|
2056		-|PLC station No.|2|Need to be same as the PLC setting
2057		-
2058		-**Address List**
2059		-
2060		-(% class="table-bordered" %)
2061		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2062		-|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
2063		-|Q|Q|Q ddddd.o|0.0~~99999.7|
2064		-|M|M|M ddddd.o|0.0~~99999.7|
2065		-|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
2066		-nn: block number;
2067		-
2068		-dddd: address;
2069		-)))
2070		-|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
2071		-|Q|QW|QW ddddd|0~~99999|
2072		-|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
2073		-|MW|MW ddddd|0~~99999|(((
2074		-MW0=MB(0~~1)
2075		-
2076		-MW2=MB(2~~3)
2077		-
2078		-Address value is a multiple of 2
2079		-)))
2080		-|MD|MD ddddd|0~~99999|(((
2081		-MD0=MB(0~~3)
2082		-
2083		-MD4=MB(4~~7)
2084		-
2085		-Address value is a multiple of 4
2086		-)))
2087		-|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
2088		-nn: block number;
2089		-
2090		-dddd: address
2091		-)))
2092		-|DBxDBW|DBxDBW nndddd|0~~99999999
2093		-|DBxDBD|DBxDBD nndddd|0~~99999999
2094		-
2095		-**Communication Settings**
2096		-
2097		-Enable HMI Ethernet in [Project Settings];
2098		-
2099		-(% style="text-align:center" %)
2100		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2101		-
2102		-Set PLC IP in [Device IP] settings;
2103		-
2104		-(% style="text-align:center" %)
2105		-[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
2106		-
2107		-* PLC IP Address: PLC IP
2108		-* PLC pot No.: 102(fixed)
2109		-* Network:TCP_Client_2N(fixed)
2110		-
2111		-(% style="text-align:center" %)
2112		-[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
2113		-
2114		-* Wait timeout: depend on actual network situation (more than 1500 ms)
2115		-
2116		-**Cable Wiring**
2117		-
2118		-(% style="text-align:center" %)
2119		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2120		-
2121		-== **S7-1200 Ethernet** ==
2122		-
2123		-Supported Series: Siemens S7-1200
2124		-
2125		-**HMI Setting**
2126		-
2127		-(% class="table-bordered" %)
2128		-|**Items**|**Settings**|**Note**
2129		-|Protocol|Siemens S7-1200|
2130		-|Connection|Ethernet|
2131		-|Port No.|102|
2132		-|PLC station No.|2|
2133		-
2134		-**Address List**
2135		-
2136		-(% class="table-bordered" %)
2137		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2138		-|(% rowspan="4" %)Bit|I|I|M d.o|(((
2139		-d:0~-~-9999
2140		-
2141		-o:0-7
2142		-)))|
2143		-|Q|Q|Q d.o|(((
2144		-d:0~-~-9999
2145		-
2146		-o:0-7
2147		-)))|
2148		-|M|M|M d.o|(((
2149		-d:0~-~-9999
2150		-
2151		-o:0-7
2152		-)))|
2153		-|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
2154		-nn:0-9999,
2155		-
2156		-dddd:0-9999,
2157		-
2158		-o:0-7
2159		-)))|(((
2160		-nn:DB No.
2161		-
2162		-dddd:address value
2163		-
2164		-o: digit address
2165		-)))
2166		-|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
2167		-|M|MW|MW d|d:0-99999|(((
2168		-MW0=MB(0~~1)
2169		-
2170		-MW2=MB(2~~3)
2171		-
2172		-Address value is a multiple of 2
2173		-)))
2174		-|M|MD|MD d|d:0-99999|(((
2175		-MD0=MB(0~~3)
2176		-
2177		-MD4=MB(4~~7)
2178		-
2179		-Address value is a multiple of 4
2180		-)))
2181		-|I|IW|IW d|d:0-99999|
2182		-|Q|QW|QW d|d:0-99999|
2183		-|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
2184		-nn:0-9999
2185		-
2186		-dddd:0-9999
2187		-)))|(((
2188		-nn:DB No.
2189		-
2190		-dddd:address value
2191		-)))
2192		-|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
2193		-nn:0-9999
2194		-
2195		-dddd:0-9999
2196		-)))|(((
2197		-nn:DB No.
2198		-
2199		-dddd:address value
2200		-
2201		-Address value is a multiple of 2
2202		-)))
2203		-|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
2204		-nn:0-9999
2205		-
2206		-dddd:0-9999
2207		-)))|(((
2208		-nn:DB No.
2209		-
2210		-dddd:address value
2211		-
2212		-Address value is a multiple of 4
2213		-)))
2214		-
2215		-**Communication Settings**
2216		-
2217		-Enable HMI Ethernet in [Project Settings];
2218		-
2219		-(% style="text-align:center" %)
2220		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
2221		-
2222		-Set PLC IP in [Device IP] settings;
2223		-
2224		-(% style="text-align:center" %)
2225		-[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
2226		-
2227		-**✎Note:**
2228		-
2229		-* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
2230		-* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
2231		-
2232		-**PLC Settings**
2233		-
2234		-Add BD
2235		-
2236		-* Please uncheck [Symbolic access only] option;
2237		-
2238		-(% style="text-align:center" %)
2239		-[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
2240		-
2241		-Address settings, using BD2 as example.
2242		-
2243		-* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
2244		-* 2 represent DB block number
2245		-* xxxx represent address
2246		-
2247		-**Such as:**
2248		-
2249		-* DBxDBB20000 = DB2.DBB0
2250		-* DBxDBW20004 = DB2.DBW4
2251		-
2252		-(% style="text-align:center" %)
2253		-[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
2254		-
2255		-**How to connect with S7-1200 Firmware V4.0**
2256		-
2257		-PLC configuration
2258		-
2259		-* Double click [device configuration] in Siemens via software
2260		-* Double click [protection] to enter protection configuration screen
2261		-
2262		-(% style="text-align:center" %)
2263		-[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
2264		-
2265		-* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
2266		-
2267		-(% style="text-align:center" %)
2268		-[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
2269		-
2270		-DB settings
2271		-
2272		-* Right click [DB], select [properties]
2273		-* Uncheck [optimized block access]
2274		-
2275		-**Cable Wiring**
2276		-
2277		-(% style="text-align:center" %)
2278		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2279		-
2280		-== **LOGO Ethernet** ==
2281		-
2282		-Supported Series: Siemens Logo 0BA0 series
2283		-
2284		-**HMI Settings**
2285		-
2286		-(% class="table-bordered" %)
2287		-|**Items**|**Settings**|**Note**
2288		-|Protocol|Siemens LOGO|
2289		-|Connection|Ethernet|
2290		-|Port No.|102|
2291		-|PLC station No.|2|
2292		-
2293		-**Address List**
2294		-
2295		-(% class="table-bordered" %)
2296		-|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
2297		-|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
2298		-|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
2299		-|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
2300		-|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
2301		-|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
2302		-|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
2303		-|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
2304		-|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
2305		-|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
2306		-|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
2307		-|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
2308		-|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
2309		-|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
2310		-|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
2311		-|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
2312		-
2313		-**PLC Settings in LOGO Software:**
2314		-
2315		-Click [Tools]~-~-[Ethernet Connections],shown as below.
2316		-
2317		-(% style="text-align:center" %)
2318		-[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
2319		-
2320		-Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
2321		-
2322		-(% style="text-align:center" %)
2323		-[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
2324		-
2325		-**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
2326		-
2327		-(% style="text-align:center" %)
2328		-[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
2329		-
2330		-**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
2331		-
2332		-(% style="text-align:center" %)
2333		-[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
2334		-
2335		-
2336		-(% style="text-align:center" %)
2337		-[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
2338		-
2339		-
2340		-**HMI Communication Settings**
2341		-
2342		-Set PLC IP in [Device IP] settings;
2343		-
2344		-(% style="text-align:center" %)
2345		-[[image:SiemensLOGODeviceIP.png]]
2346		-
2347		-Enable HMI Ethernet in [Project Settings];
2348		-
2349		-(% style="text-align:center" %)
2350		-[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
2351		-
2352		-TSAP setting
2353		-
2354		-* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
2355		-* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
2356		-* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
2357		-
2358		-**✎Note:**
2359		-
2360		-* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
2361		-
2362		-(% style="text-align:center" %)
2363		-[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
2364		-
2365		-
2366		-* AI word address and Ibit address are read-only and cannot be written on HMI.
2367		-* VW address should be even number.such as VW0, VW2, VW4...
2368		-* VD address it takes two VW addresses.such as VD0,VD4,VD8...
2369		-* Written value of RTC cannot exceed 255.
2370		-
2371		-**Cable Wiring**
2372		-
2373		-(% style="text-align:center" %)
2374		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2375		-
2376		-== **S7-XXX Ethernet** ==
2377		-
2378		-Supported Series: Siemens S7-400, S7-1200 and S7-1500
2379		-
2380		-**HMI Setting**
2381		-
2382		-(% class="table-bordered" style="width:823px" %)
2383		-|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
2384		-|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
2385		-|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
2386		-|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
2387		-|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
2388		-|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
2389		-
2390		-Slot from TIA Portal is equal to Device No. of PIStudio
2391		-
2392		-Rack from TIA Portal is equal to HMI No. of PIStudio
2393		-
2394		-(% style="text-align:center" %)
2395		-[[image:S7-XXXCommunication Settings.png]]
2396		-
2397		-(% style="text-align:center" %)
2398		-[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
2399		-
2400		-**Address List**
2401		-
2402		-(% class="table-bordered" %)
2403		-|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
2404		-|(% rowspan="4" %)Bit|I|I|M d.o|(((
2405		-d:0~-~-9999
2406		-
2407		-o:0-7
2408		-)))|
2409		-|Q|Q|Q d.o|(((
2410		-d:0~-~-9999
2411		-
2412		-o:0-7
2413		-)))|
2414		-|M|M|M d.o|(((
2415		-d:0~-~-9999
2416		-
2417		-o:0-7
2418		-)))|
2419		-|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
2420		-nn:0-9999,
2421		-
2422		-dddd:0-9999,
2423		-
2424		-o:0-7
2425		-)))|(((
2426		-nn:DB No.
2427		-
2428		-dddd:address value
2429		-
2430		-o: digit address
2431		-)))
2432		-|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
2433		-|M|MW|MW d|d:0-99999|(((
2434		-MW0=MB(0~~1)
2435		-
2436		-MW2=MB(2~~3)
2437		-
2438		-Address value is a multiple of 2
2439		-)))
2440		-|M|MD|MD d|d:0-99999|(((
2441		-MD0=MB(0~~3)
2442		-
2443		-MD4=MB(4~~7)
2444		-
2445		-Address value is a multiple of 4
2446		-)))
2447		-|I|IW|IW d|d:0-99999|
2448		-|Q|QW|QW d|d:0-99999|
2449		-|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
2450		-nn:0-9999
2451		-
2452		-dddd:0-9999
2453		-)))|(((
2454		-nn:DB No.
2455		-
2456		-dddd:address value
2457		-)))
2458		-|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
2459		-nn:0-9999
2460		-
2461		-dddd:0-9999
2462		-)))|(((
2463		-nn:DB No.
2464		-
2465		-dddd:address value
2466		-
2467		-Address value is a multiple of 2
2468		-)))
2469		-|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
2470		-nn:0-9999
2471		-
2472		-dddd:0-9999
2473		-)))|(((
2474		-nn:DB No.
2475		-
2476		-dddd:address value
2477		-
2478		-Address value is a multiple of 4
2479		-)))
2480		-
2481		-**Communication Settings**
2482		-
2483		-Enable HMI Ethernet in [Project Settings];
2484		-
2485		-(% style="text-align:center" %)
2486		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
2487		-
2488		-Set PLC IP in [Device IP] settings;
2489		-
2490		-(% style="text-align:center" %)
2491		-[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
2492		-
2493		-**✎Note:**
2494		-
2495		-* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
2496		-* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
2497		-
2498		-**Cable Wiring**
2499		-
2500		-{{id name="OLE_LINK8"/}}
2501		-
2502		-(% style="text-align:center" %)
2503		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
2504		-
2505	2505	= **User Defined Protocol** =
2506	2506
2507	2507	If the device does not support MODBUS standard, and the protocol is not list in PIStudio, then user can define the protocol by following instruction to realize simply communication functions like sending and receiving commands.
...	...	@@ -2646,8 +2646,6 @@
2646	2646
2647	2647	**✎Note:** COM3 only available in PI8000/PI9000 series.
2648	2648
2649		-= =
2650		-
2651	2651	= **Printer** =
2652	2652
2653	2653	== **TSPL label printer** ==
...	...	@@ -2848,3 +2848,449 @@
2848	2848
2849	2849	(% style="text-align:center" %)
2850	2850	[[image:image-20220817154212-1.jpeg||height="315" width="554" class="img-thumbnail"]]
	2585	+
	2586	+= **Barcode Scanner** =
	2587	+
	2588	+Supported: DELI 14880 barcode scanner
	2589	+
	2590	+**HMI Setting**
	2591	+
	2592	+|**Items**|**Settings**|**Note**
	2593	+|Protocol|Barcode Scanner|
	2594	+|Connection|USB|
	2595	+
	2596	+**Operating Procedures**
	2597	+
	2598	+Select [Barcode Scanner];
	2599	+
	2600	+(% style="text-align:center" %)
	2601	+[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	2602	+
	2603	+Set address for receiving;
	2604	+
	2605	+Set correct length;
	2606	+
	2607	+(% style="text-align:center" %)
	2608	+[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	2609	+
	2610	+**✎Note:**
	2611	+
	2612	+* The protocol uploads the information acquired by the USB scanner to the HMI;
	2613	+* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
	2614	+* Recommended model: DELI 14880 barcode scanner;
	2615	+
	2616	+= **Hitachi EHV Series (Ethernet)** =
	2617	+
	2618	+Supported series: Hitachi EHV series
	2619	+
	2620	+**HMI Settings**
	2621	+
	2622	+(% class="table-bordered" %)
	2623	+|**Items**|**Settings**|**Note**
	2624	+|Protocol|Hitachi EHV series|
	2625	+|Connection|Ethernet|
	2626	+|Port No.|3004~~3007|
	2627	+
	2628	+**Address List**
	2629	+
	2630	+(% class="table-bordered" %)
	2631	+|**Type**|**Register**|**Range**|**Format**|**Note**
	2632	+|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
	2633	+|M|0 - 7FFF.f (Hex)|M HHHH.h|
	2634	+|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
	2635	+H1H2H3H4 Module main number
	2636	+
	2637	+H1: Remote number
	2638	+
	2639	+H2: Unit number
	2640	+
	2641	+H3: Slot number
	2642	+
	2643	+H4: Word number of Module
	2644	+
	2645	+H Sub number of Module
	2646	+
	2647	+For example:X21.3
	2648	+
	2649	+Slot number 2
	2650	+
	2651	+Word number of module is 1
	2652	+
	2653	+Bit number of module is 3
	2654	+
	2655	+Remote number and unit number are 0
	2656	+)))
	2657	+|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
	2658	+|R|0 – FF.f (Hex)|R HH.h|
	2659	+|L|0 - 73FF.f (Hex)|L HHHH.h|
	2660	+|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
	2661	+|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
	2662	+H1H2H3H4 Module main number
	2663	+
	2664	+H1: Remote number
	2665	+
	2666	+H2: Unit number
	2667	+
	2668	+H3: Slot number
	2669	+
	2670	+H4: Word number of module
	2671	+
	2672	+For example:WX21
	2673	+
	2674	+Word number of module is 1
	2675	+
	2676	+Slot number is 2
	2677	+
	2678	+Remote number and unit number are 0
	2679	+)))
	2680	+|WY|0 – FFFF (Hex)|WY H1H2H3H4
	2681	+|WR|0 – FFFF (Hex)|WR HHHH|
	2682	+|WL|0 - 73FF (Hex)|WL HHHH|
	2683	+|TC|0 - 2559|TC DDDD|
	2684	+
	2685	+**Communication settings in HMI**
	2686	+
	2687	+Enable HMI Ethernet in [Project Settings];
	2688	+
	2689	+(% style="text-align:center" %)
	2690	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2691	+
	2692	+Set PLC IP in [Device IP] settings;
	2693	+
	2694	+(% style="text-align:center" %)
	2695	+[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	2696	+
	2697	+**PLC Configuration**
	2698	+
	2699	+Connect with PLC, select[Online mode];
	2700	+
	2701	+(% style="text-align:center" %)
	2702	+[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	2703	+
	2704	+Set IP address, it is the same LAN parameters with HMI;
	2705	+
	2706	+(% style="text-align:center" %)
	2707	+[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	2708	+
	2709	+3) Save PLC communication parameter, and restart PLC
	2710	+
	2711	+**PLC Monitor Mode**
	2712	+
	2713	+Connect with PLC and choose to “online” mode
	2714	+
	2715	+(% style="text-align:center" %)
	2716	+[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	2717	+
	2718	+Open I/O monitor sheet1
	2719	+
	2720	+(% style="text-align:center" %)
	2721	+[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	2722	+
	2723	+During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	2724	+
	2725	+(% style="text-align:center" %)
	2726	+[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	2727	+
	2728	+Enter the register address, click OK to view the value of the register.
	2729	+
	2730	+(% style="text-align:center" %)
	2731	+[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	2732	+
	2733	+(% style="text-align:center" %)
	2734	+[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	2735	+
	2736	+**✎Note:**
	2737	+
	2738	+* Both word registers and bit registers support even continuous read/write functions;
	2739	+* The range of registers is based on the specific PLC type;
	2740	+
	2741	+**Cable Wiring**
	2742	+
	2743	+(% style="text-align:center" %)
	2744	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	2745	+
	2746	+= **IEC60870-5 104 Client** =
	2747	+
	2748	+**HMI Setting**
	2749	+
	2750	+(% class="table-bordered" %)
	2751	+|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
	2752	+|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
	2753	+|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
	2754	+|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	2755	+
	2756	+**Address List**
	2757	+
	2758	+(% class="table-bordered" %)
	2759	+|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
	2760	+|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
	2761	+|(% style="width:461px" %)SCNA|0~~16777215.7
	2762	+|(% style="width:461px" %)DPTB|0~~16777215.7
	2763	+|(% style="width:461px" %)DCNA|0~~16777215.7
	2764	+|(% style="width:461px" %)METF|0~~16777215.7
	2765	+|(% style="width:461px" %)SENC|0~~16777215.7
	2766	+|(% style="width:461px" %)SENA|0~~16777215.7
	2767	+|(% style="width:461px" %)MENA|0~~16777215.7
	2768	+|(% style="width:461px" %)METD|0~~16777215.7
	2769	+|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
	2770	+|(% style="width:461px" %)SCNA|0~~16777215
	2771	+|(% style="width:461px" %)DPTB|0~~16777215
	2772	+|(% style="width:461px" %)DCNA|0~~16777215
	2773	+|(% style="width:461px" %)SENA|0~~16777215
	2774	+|(% style="width:461px" %)MENA|0~~16777215
	2775	+|(% style="width:461px" %)METD|0~~16777215
	2776	+|(% style="width:461px" %)INRO|0~~16777215
	2777	+|(% style="width:461px" %)TIMESYN|0~~16777215
	2778	+|(% style="width:461px" %)TIMEZ|0~~16777215
	2779	+|(% style="width:461px" %)NTP|0~~16777215
	2780	+|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
	2781	+|(% style="width:461px" %)SENC|0~~16777215
	2782	+
	2783	+**Address Configuration**
	2784	+
	2785	+The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	2786	+
	2787	+(% style="text-align:center" %)
	2788	+[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	2789	+
	2790	+(% style="text-align:center" %)
	2791	+[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	2792	+
	2793	+Extended tag name
	2794	+
	2795	+Address range for the extended tag.
	2796	+
	2797	+**Communication Settings**
	2798	+
	2799	+Enable HMI Ethernet in [Project Settings];
	2800	+
	2801	+(% style="text-align:center" %)
	2802	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2803	+
	2804	+Set PLC IP in [Device IP] settings;
	2805	+
	2806	+(% style="text-align:center" %)
	2807	+[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	2808	+
	2809	+**Cable Wiring**
	2810	+
	2811	+(% style="text-align:center" %)
	2812	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	2813	+
	2814	+= **LG XGK FEnet Ethernet** =
	2815	+
	2816	+Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	2817	+
	2818	+**HMI Settings**
	2819	+
	2820	+(% class="table-bordered" %)
	2821	+|**Items**|**Settings**|**Note**
	2822	+|Protocol|LG XGK FEnet(Ethernet)|
	2823	+|Connection|Ethernet|
	2824	+|Port No.|2004|
	2825	+
	2826	+**Address List**
	2827	+
	2828	+(% class="table-bordered" %)
	2829	+|**Type**|**Register**|**Range**|**Format**|**Note**
	2830	+|(% rowspan="14" %)Word|P|0~~2047|P d|
	2831	+|M|0~~2047|M d|
	2832	+|K|0~~2047|K d|
	2833	+|F|0~~2047|F d|
	2834	+|T|0~~2047|T d|
	2835	+|C|0~~2047|C d|
	2836	+|Z|0~~127|Z d|
	2837	+|S|0~~127|S d|
	2838	+|L|0~~11263|L d|
	2839	+|N|0~~21503|N d|
	2840	+|D|0~~32767|D d|
	2841	+|R|0~~32767|R d|
	2842	+|ZR|0~~65535|ZR d|
	2843	+|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	2844	+
	2845	+**✎Note:**
	2846	+
	2847	+* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
	2848	+* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
	2849	+* All bit registers are in the form of bits in word, and the range is the same as the word register;
	2850	+
	2851	+**Communication settings in HMI**
	2852	+
	2853	+Enable HMI Ethernet in [Project Settings];
	2854	+
	2855	+(% style="text-align:center" %)
	2856	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	2857	+
	2858	+Set PLC IP in [Device IP] settings;
	2859	+
	2860	+(% style="text-align:center" %)
	2861	+[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	2862	+
	2863	+**Cable Wiring**
	2864	+
	2865	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
	2866	+
	2867	+
	2868	+= **OpenCAN** =
	2869	+
	2870	+OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
	2871	+
	2872	+This protocol is only available in PI8000 series HMI.
	2873	+
	2874	+**HMI Settings**
	2875	+
	2876	+|**Items**|**Settings**|**Note**
	2877	+|Protocol|OPENCAN|
	2878	+|Connection|CAN port|
	2879	+|Baud rate|250000|
	2880	+
	2881	+**CAN frame setting in HMI**
	2882	+
	2883	+Click [OpenCAN setting] button in communication setting window;
	2884	+
	2885	+(% style="text-align:center" %)
	2886	+[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
	2887	+
	2888	+Click [Add] to create a new frame;
	2889	+
	2890	+(% style="text-align:center" %)
	2891	+[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
	2892	+
	2893	+|**No**|**Items**|**Description**
	2894	+|1|Add|add a frame related to register address
	2895	+|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
	2896	+|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
	2897	+|4|Modify|Modify the frames in frame management
	2898	+|5|Copy|Copy one frame to another
	2899	+|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
	2900	+|7|Empty|All frames in the list are cleared
	2901	+|8|Browse|Displays configuration files in XML format in IE
	2902	+|9|OK|Complete the configuration of the frame and exit
	2903	+
	2904	+Set CANBUS frame in setting windows
	2905	+
	2906	+(% style="text-align:center" %)
	2907	+[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
	2908	+
	2909	+|**No**|**Items**|**Description**
	2910	+|1|ID|Set the ID of a can frame in hexadecimal format;
	2911	+|2|ID assign|split the ID by PF, PS, and SA;
	2912	+|3|Frame type|Select Standard frame or Extended Frame;
	2913	+|4|Frame format|Select between data frame and remote Frame;
	2914	+|5|Data|Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
	2915	+|6|Use address|(((
	2916	+Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
	2917	+
	2918	+**Edit:** Set a bit or word address by its format;
	2919	+
	2920	+**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
	2921	+)))
	2922	+|(% rowspan="8" %)7|(% rowspan="8" %)Data interactive configuration|There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
	2923	+|Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
	2924	+|Feedback mode: feedback mode includes no response, confirm response and data response;
	2925	+|No response: the device or touch screen will not receive feedback;
	2926	+|Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
	2927	+|Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
	2928	+|response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
	2929	+|Response timeout: sets whether the response frame timeout;
	2930	+|(% rowspan="3" %)8|(% rowspan="3" %)Control address|If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
	2931	+|Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
	2932	+|Manually send: a manually send tick indicates only one send;
	2933	+|9|Flag configuration|Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
	2934	+|10|Note|Fill the text to explain the meaning of the frame;
	2935	+|11|Data assign|Preview the display in this table based on the address and the corresponding number of digits;
	2936	+|12|Current operation display|Display the description of current operation;
	2937	+|13|Add|Add a new frame;
	2938	+|14|Save frame|Save the configured frame format;
	2939	+|15|Cancel|Cancel the frame configuration;
	2940	+
	2941	+Set CAN address (Read or write operation);
	2942	+
	2943	+(% style="text-align:center" %)
	2944	+[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
	2945	+
	2946	+|**No.**|**Item**|**Description**
	2947	+|1|Current address|Displays the register type and register address set by the user in the data access interface
	2948	+|(% rowspan="3" %)2|(% rowspan="3" %)Trigger|Two operations, "read" and "write," are based on on-screen registers
	2949	+|If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
	2950	+|If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
	2951	+|(% rowspan="5" %)3|(% rowspan="3" %)Data operation|The read and write operations in the trigger conditions are set accordingly.
	2952	+|If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
	2953	+|If the trigger condition is a writing operation, there are two situations:(((
	2954	+* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
	2955	+* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
	2956	+)))
	2957	+|(% rowspan="2" %)Position and length input format|If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
	2958	+|If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
	2959	+|4|Add|Add current configuration
	2960	+|5|Close|Close the configuration window to exit
	2961	+
	2962	+**Multiple Packages Settings**
	2963	+
	2964	+(% style="text-align:center" %)
	2965	+[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
	2966	+
	2967	+Check [Multiple packages supported] to open [Multiple package data] window, as below show.
	2968	+
	2969	+Select Multiple package type
	2970	+
	2971	+* Not Multiple packages
	2972	+* J1939 Multiple packages
	2973	+* Customized Multiple packages
	2974	+
	2975	+Click [Edit Receive data] for [Receive] settings
	2976	+
	2977	+* Start code+ Total length (J1939)
	2978	+
	2979	+(% style="text-align:center" %)
	2980	+[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2981	+
	2982	+As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
	2983	+
	2984	+* Start code + Data max length (J1939)
	2985	+
	2986	+(% style="text-align:center" %)
	2987	+[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2988	+
	2989	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
	2990	+
	2991	+* Data max length (J1939)
	2992	+
	2993	+(% style="text-align:center" %)
	2994	+[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
	2995	+
	2996	+As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
	2997	+
	2998	+* Customized multiple package
	2999	+
	3000	+(% style="text-align:center" %)
	3001	+[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
	3002	+
	3003	+As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
	3004	+
	3005	+Click [Edit Send data] for [Send] setting
	3006	+
	3007	+* J1939
	3008	+
	3009	+(% style="text-align:center" %)
	3010	+[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
	3011	+
	3012	+[Data] is all data to be sent.
	3013	+
	3014	+Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
	3015	+
	3016	+* Customized multiple package
	3017	+
	3018	+(% style="text-align:center" %)
	3019	+[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
	3020	+
	3021	+[Data] is all data to be sent.
	3022	+
	3023	+As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
	3024	+
	3025	+**Cable Wiring**
	3026	+
	3027	+(% style="text-align:center" %)
	3028	+[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
	3029	+
	3030	+**✎Note:** The address interval between each frame need to be more than a word address;

image-20220829151746-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.1 KB

Content

image-20220829151848-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.0 KB

Content

image-20220829152016-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.2 KB

Content

image-20220829152042-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.0 KB

Content

image-20220829152102-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.3 KB

Content

image-20220829152327-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+42.5 KB

Content

image-20220829152610-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.5 KB

Content

image-20220829155452-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.1 KB

Content

image-20220829162116-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+50.4 KB

Content

image-20220830094600-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.4 KB

Content

image-20220830094657-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.4 KB

Content

image-20220830094929-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.4 KB

Content

image-20220830095131-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.7 KB

Content

image-20220830140537-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.2 KB

Content

image-20220830140629-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+48.4 KB

Content

image-20220830141138-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.9 KB

Content