Changes for page 12 PLC Protocol OLD

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -399,7 +399,6 @@
399	399
400	400	(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
401	401
402		-
403	403	**Software configuration of PLC**
404	404
405	405	**1）PLC programming software**
...	...	@@ -469,8 +469,49 @@
469	469
470	470	The above are all the steps for establishing ethernet communication between Wecon HMI with LX5V PLC.
471	471
472		-= **Allen-Bradley** =
	471	+= Create communication with **Rockwell PLC** =
473	473
	473	+== **MicroLogix Protocol** ==
	474	+
	475	+MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
	476	+
	477	+**HMI Settings**
	478	+
	479	+(% class="table-bordered" %)
	480	+|**Item**|**Settings**|**Note**
	481	+|Protocol|Allen-Bradlley MicroLogix|
	482	+|Connection|RS232|
	483	+|Baud rate|19200|
	484	+|Data bit|8|
	485	+|Parity|None|
	486	+|Stop bit|1|
	487	+|PLC station No.|1|
	488	+
	489	+**Address List**
	490	+
	491	+(% class="table-bordered" %)
	492	+|**Type**|**Device registers**|**Format**|**Range**|**Note**
	493	+|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
	494	+|O|O d.d|0.0~~255.15|
	495	+|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	496	+|S|S d.d|0.0~~255.15|
	497	+|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
	498	+|(% rowspan="9" %)Word|S|S d|0~~255|
	499	+|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
	500	+|TP|TP nnhh|0~~ffff
	501	+|CS|CS nnhh|0~~ffff
	502	+|CP|CP nnhh|0~~ffff
	503	+|N|N nnhh|0~~ffff
	504	+|C|C nnhh|0~~ffff
	505	+|T|T nnhh|0~~ffff
	506	+|R|R nnhh|0~~ffff
	507	+
	508	+**Cable Wiring**
	509	+
	510	+
	511	+(% style="text-align:center" %)
	512	+[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
	513	+
474	474	== **FreeTag Ethernet/IP (CompactLogix)** ==
475	475
476	476	Allen-Brandly CompactLogix
...	...	@@ -528,46 +528,6 @@
528	528	(% style="text-align:center" %)
529	529	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
530	530
531		-== **MicroLogix** ==
532		-
533		-MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
534		-
535		-**HMI Settings**
536		-
537		-(% class="table-bordered" %)
538		-|**Item**|**Settings**|**Note**
539		-|Protocol|Allen-Bradlley MicroLogix|
540		-|Connection|RS232|
541		-|Baud rate|19200|
542		-|Data bit|8|
543		-|Parity|None|
544		-|Stop bit|1|
545		-|PLC station No.|1|
546		-
547		-**Address List**
548		-
549		-(% class="table-bordered" %)
550		-|**Type**|**Device registers**|**Format**|**Range**|**Note**
551		-|(% rowspan="5" %)Bit|I|I d.d|0.0~~255.15|
552		-|O|O d.d|0.0~~255.15|
553		-|B|B nnhh.dd|0.0~~ffff.15|nn: block number (hex)
554		-|S|S d.d|0.0~~255.15|
555		-|N|N nnhh.dd|0.0~~ffff.15|nn: block number (hex)
556		-|(% rowspan="9" %)Word|S|S d|0~~255|
557		-|TS|TS nnhh|0~~ffff|(% rowspan="8" %)nn: block number (hex)
558		-|TP|TP nnhh|0~~ffff
559		-|CS|CS nnhh|0~~ffff
560		-|CP|CP nnhh|0~~ffff
561		-|N|N nnhh|0~~ffff
562		-|C|C nnhh|0~~ffff
563		-|T|T nnhh|0~~ffff
564		-|R|R nnhh|0~~ffff
565		-
566		-**Cable Wiring**
567		-
568		-(% style="text-align:center" %)
569		-[[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
570		-
571	571	== **AB PLC address edit** ==
572	572
573	573	The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
...	...	@@ -585,117 +585,280 @@
585	585	|(% style="width:393px" %)B|(% style="width:350px" %)fff.dd|(% style="width:333px" %)B 000.0 ~~ fff.15
586	586	|(% style="width:393px" %)S|(% style="width:350px" %)dd.dd|(% style="width:333px" %)S 0.0 ~~ 255.15
587	587	|(% style="width:393px" %)N|(% style="width:350px" %)ffff.dd|(% style="width:333px" %)N 000.0 ~~ fff.15
588		-|(% style="width:393px" %)**PLC word address type**|(% style="width:350px" %)**Address format**|(% style="width:333px" %)**Address range**
589		-|(% style="width:393px" %)S|(% style="width:350px" %)ddd|(% style="width:333px" %)S0 ~~ 255
590		-|(% style="width:393px" %)TS|(% style="width:350px" %)ffff|(% style="width:333px" %)TS0 ~~ FFFF
591		-|(% style="width:393px" %)TP|(% style="width:350px" %)ffff|(% style="width:333px" %)TP0 ~~ FFFF
592		-|(% style="width:393px" %)CS|(% style="width:350px" %)ffff|(% style="width:333px" %)CS0 ~~ FFFF
593		-|(% style="width:393px" %)CP|(% style="width:350px" %)ffff|(% style="width:333px" %)CP0 ~~ FFFF
594		-|(% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF
595		-|(% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF
	588	+|**PLC word address type**|**Address format**|**Address range**
	589	+|S|ddd|S0 ~~ 255
	590	+|TS|ffff|TS0 ~~ FFFF
	591	+|TP|ffff|TP0 ~~ FFFF
	592	+|CS|ffff|CS0 ~~ FFFF
	593	+|CP|ffff|CP0 ~~ FFFF
	594	+|N|ffff|N0 ~~ FFFF
	595	+|F|ffff|F0 ~~ FFFF
596	596
597		-= **Barcode Scanner** =
	597	+= (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** =
598	598
599		-Supported: DELI 14880 barcode scanner
	599	+== **S7-200 Smart Ethernet** ==
600	600
	601	+Supported Series: Siemens S7-200 SMART Series Ethernet Module.
	602	+
	603	+Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
	604	+
601	601	**HMI Setting**
602	602
603	603	(% class="table-bordered" %)
604	604	|**Items**|**Settings**|**Note**
605		-|Protocol|Barcode Scanner|
606		-|Connection|USB|
	609	+|Protocol|Simens S7-200 Smart Ethernet|
	610	+|Connection|Ethernet|
	611	+|Port No.|102|
	612	+|PLC station No.|2|
607	607
608		-**Operating Procedures**
	614	+**Address List**
609	609
610		-Select [Barcode Scanner];
	616	+(% class="table-bordered" %)
	617	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	618	+|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	619	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	620	+|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
	621	+|V|V|V ddddd.o|0.0~~99999.7|
	622	+|M|M|M ddddd.o|0.0~~99999.7|
	623	+|SM|SM|ddddd.o|0.0~~99999.7|
	624	+|S|S|ddddd.o|0.0~~99999.7|Read only
	625	+|T|T|ddddd|0~~99999|Timer state, read only
	626	+|C|C|ddddd|0~~99999|Counter state, read only
	627	+|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
	628	+|Q|QW|QW ddddd|0~~99999|
	629	+|AI|AIW|AIW ddddd|0~~99999|
	630	+|AQ|VB|VB ddddd|0~~99999|
	631	+|V|VW|VW ddddd|0~~99998|(((
	632	+VW0=VB (0~~1)
611	611
	634	+VW2=VB (2~~3)
	635	+
	636	+Address value is a multiple of 2
	637	+)))
	638	+|V|VD|VD ddddd|0~~99998|(((
	639	+VD0=VB (0~~3)
	640	+
	641	+VD2=VB (4~~7)
	642	+
	643	+Address value is a multiple of 4
	644	+)))
	645	+|M|MB|MB ddddd|0~~99999|
	646	+|M|MW|MW ddddd|0~~99999|(((
	647	+MW0=MB(0~~1)
	648	+
	649	+MW2=MB(2~~3)
	650	+
	651	+Address value is a multiple of 2
	652	+)))
	653	+|M|MD|MD ddddd|0~~99999|(((
	654	+MD0=MB(0~~3)
	655	+
	656	+MD4=MB(4~~7)
	657	+
	658	+Address value is a multiple of 4
	659	+)))
	660	+|T|TW|TW ddddd|0~~99999|Value of timer
	661	+|C|CW|CW ddddd|0~~99999|Value of counter
	662	+|W|SW|SW ddddd|0~~99999|
	663	+
	664	+**Communication Settings**
	665	+
	666	+Enable HMI Ethernet in [Project Settings];
	667	+
612	612	(% style="text-align:center" %)
613		-[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	669	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
614	614
615		-Set address for receiving;
	671	+Set PLC IP in [Device IP] settings;
616	616
617		-Set correct length;
	673	+(% style="text-align:center" %)
	674	+[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
618	618
	676	+* PLC IP Address: PLC IP
	677	+* PLC pot No.: 102(fixed)
	678	+* Network:TCP_Client_2N(fixed)
	679	+
619	619	(% style="text-align:center" %)
620		-[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	681	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
621	621
622		-**✎Note:**
	683	+* Wait timeout: depend on actual network situation (more than 1500 ms)
623	623
624		-* The protocol uploads the information acquired by the USB scanner to the HMI;
625		-* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
626		-* Recommended model: DELI 14880 barcode scanner;
	685	+**Cable Wiring**
627	627
628		-= **Hitachi EHV Series (Ethernet)** =
	687	+(% style="text-align:center" %)
	688	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
629	629
630		-Supported series: Hitachi EHV series
	690	+== **S7-300 Ethernet** ==
631	631
632		-**HMI Settings**
	692	+Supported Series: Siemens S7-300 series PLC
633	633
	694	+**HMI Setting**
	695	+
634	634	(% class="table-bordered" %)
635	635	|**Items**|**Settings**|**Note**
636		-|Protocol|Hitachi EHV series|
	698	+|Protocol|Simens S7-300 Ethernet|
637	637	|Connection|Ethernet|
638		-|Port No.|3004~~3007|
	700	+|Port No.|102|
	701	+|PLC station No.|2|Need to be same as the PLC setting
639	639
640	640	**Address List**
641	641
642	642	(% class="table-bordered" %)
643		-|**Type**|**Register**|**Range**|**Format**|**Note**
644		-|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
645		-|M|0 - 7FFF.f (Hex)|M HHHH.h|
646		-|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
647		-H1H2H3H4 Module main number
	706	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	707	+|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	708	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	709	+|M|M|M ddddd.o|0.0~~99999.7|
	710	+|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
	711	+nn: block number;
648	648
649		-H1: Remote number
	713	+dddd: address;
	714	+)))
	715	+|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
	716	+|Q|QW|QW ddddd|0~~99999|
	717	+|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
	718	+|MW|MW ddddd|0~~99999|(((
	719	+MW0=MB(0~~1)
650	650
651		-H2: Unit number
	721	+MW2=MB(2~~3)
652	652
653		-H3: Slot number
	723	+Address value is a multiple of 2
	724	+)))
	725	+|MD|MD ddddd|0~~99999|(((
	726	+MD0=MB(0~~3)
654	654
655		-H4: Word number of Module
	728	+MD4=MB(4~~7)
656	656
657		-H Sub number of Module
	730	+Address value is a multiple of 4
	731	+)))
	732	+|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
	733	+nn: block number;
658	658
659		-For example:X21.3
	735	+dddd: address
	736	+)))
	737	+|DBxDBW|DBxDBW nndddd|0~~99999999
	738	+|DBxDBD|DBxDBD nndddd|0~~99999999
660	660
661		-Slot number 2
	740	+**Communication Settings**
662	662
663		-Word number of module is 1
	742	+Enable HMI Ethernet in [Project Settings];
664	664
665		-Bit number of module is 3
	744	+(% style="text-align:center" %)
	745	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
666	666
667		-Remote number and unit number are 0
	747	+Set PLC IP in [Device IP] settings;
	748	+
	749	+(% style="text-align:center" %)
	750	+[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
	751	+
	752	+* PLC IP Address: PLC IP
	753	+* PLC pot No.: 102(fixed)
	754	+* Network:TCP_Client_2N(fixed)
	755	+
	756	+(% style="text-align:center" %)
	757	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
	758	+
	759	+* Wait timeout: depend on actual network situation (more than 1500 ms)
	760	+
	761	+**Cable Wiring**
	762	+
	763	+(% style="text-align:center" %)
	764	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	765	+
	766	+== **S7-1200 Ethernet** ==
	767	+
	768	+Supported Series: Siemens S7-1200
	769	+
	770	+**HMI Setting**
	771	+
	772	+(% class="table-bordered" %)
	773	+|**Items**|**Settings**|**Note**
	774	+|Protocol|Siemens S7-1200|
	775	+|Connection|Ethernet|
	776	+|Port No.|102|
	777	+|PLC station No.|2|
	778	+
	779	+**Address List**
	780	+
	781	+(% class="table-bordered" %)
	782	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	783	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	784	+d:0~-~-9999
	785	+
	786	+o:0-7
	787	+)))|
	788	+|Q|Q|Q d.o|(((
	789	+d:0~-~-9999
	790	+
	791	+o:0-7
	792	+)))|
	793	+|M|M|M d.o|(((
	794	+d:0~-~-9999
	795	+
	796	+o:0-7
	797	+)))|
	798	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	799	+nn:0-9999,
	800	+
	801	+dddd:0-9999,
	802	+
	803	+o:0-7
	804	+)))|(((
	805	+nn:DB No.
	806	+
	807	+dddd:address value
	808	+
	809	+o: digit address
668	668	)))
669		-|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
670		-|R|0 – FF.f (Hex)|R HH.h|
671		-|L|0 - 73FF.f (Hex)|L HHHH.h|
672		-|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
673		-|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
674		-H1H2H3H4 Module main number
	811	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	812	+|M|MW|MW d|d:0-99999|(((
	813	+MW0=MB(0~~1)
675	675
676		-H1: Remote number
	815	+MW2=MB(2~~3)
677	677
678		-H2: Unit number
	817	+Address value is a multiple of 2
	818	+)))
	819	+|M|MD|MD d|d:0-99999|(((
	820	+MD0=MB(0~~3)
679	679
680		-H3: Slot number
	822	+MD4=MB(4~~7)
681	681
682		-H4: Word number of module
	824	+Address value is a multiple of 4
	825	+)))
	826	+|I|IW|IW d|d:0-99999|
	827	+|Q|QW|QW d|d:0-99999|
	828	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	829	+nn:0-9999
683	683
684		-For example:WX21
	831	+dddd:0-9999
	832	+)))|(((
	833	+nn:DB No.
685	685
686		-Word number of module is 1
	835	+dddd:address value
	836	+)))
	837	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	838	+nn:0-9999
687	687
688		-Slot number is 2
	840	+dddd:0-9999
	841	+)))|(((
	842	+nn:DB No.
689	689
690		-Remote number and unit number are 0
	844	+dddd:address value
	845	+
	846	+Address value is a multiple of 2
691	691	)))
692		-|WY|0 – FFFF (Hex)|WY H1H2H3H4
693		-|WR|0 – FFFF (Hex)|WR HHHH|
694		-|WL|0 - 73FF (Hex)|WL HHHH|
695		-|TC|0 - 2559|TC DDDD|
	848	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	849	+nn:0-9999
696	696
697		-**Communication settings in HMI**
	851	+dddd:0-9999
	852	+)))|(((
	853	+nn:DB No.
698	698
	855	+dddd:address value
	856	+
	857	+Address value is a multiple of 4
	858	+)))
	859	+
	860	+**Communication Settings**
	861	+
699	699	Enable HMI Ethernet in [Project Settings];
700	700
701	701	(% style="text-align:center" %)
...	...	@@ -704,178 +704,285 @@
704	704	Set PLC IP in [Device IP] settings;
705	705
706	706	(% style="text-align:center" %)
707		-[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	870	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
708	708
709		-**PLC Configuration**
	872	+**✎Note:**
710	710
711		-Connect with PLC, select[Online mode];
	874	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	875	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
712	712
713		-(% style="text-align:center" %)
714		-[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	877	+**PLC Settings**
715	715
716		-Set IP address, it is the same LAN parameters with HMI;
	879	+Add BD
717	717
	881	+* Please uncheck [Symbolic access only] option;
	882	+
718	718	(% style="text-align:center" %)
719		-[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	884	+[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
720	720
721		-3) Save PLC communication parameter, and restart PLC
	886	+Address settings, using BD2 as example.
722	722
723		-**PLC Monitor Mode**
	888	+* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	889	+* 2 represent DB block number
	890	+* xxxx represent address
724	724
725		-Connect with PLC and choose to “online” mode
	892	+**Such as:**
726	726
	894	+* DBxDBB20000 = DB2.DBB0
	895	+* DBxDBW20004 = DB2.DBW4
	896	+
727	727	(% style="text-align:center" %)
728		-[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	898	+[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
729	729
730		-Open I/O monitor sheet1
	900	+**How to connect with S7-1200 Firmware V4.0**
731	731
732		-(% style="text-align:center" %)
733		-[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	902	+PLC configuration
734	734
735		-During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	904	+* Double click [device configuration] in Siemens via software
	905	+* Double click [protection] to enter protection configuration screen
736	736
737	737	(% style="text-align:center" %)
738		-[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	908	+[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
739	739
740		-Enter the register address, click OK to view the value of the register.
	910	+* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
741	741
742	742	(% style="text-align:center" %)
743		-[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	913	+[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
744	744
745		-(% style="text-align:center" %)
746		-[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	915	+DB settings
747	747
748		-**✎Note:**
	917	+* Right click [DB], select [properties]
	918	+* Uncheck [optimized block access]
749	749
750		-* Both word registers and bit registers support even continuous read/write functions;
751		-* The range of registers is based on the specific PLC type;
752		-
753	753	**Cable Wiring**
754	754
755	755	(% style="text-align:center" %)
756	756	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
757	757
758		-= **IEC60870-5 104 Client** =
	925	+== **LOGO Ethernet** ==
759	759
760		-**HMI Setting**
	927	+Supported Series: Siemens Logo 0BA0 series
761	761
	929	+**HMI Settings**
	930	+
762	762	(% class="table-bordered" %)
763		-|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
764		-|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
765		-|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
766		-|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	932	+|**Items**|**Settings**|**Note**
	933	+|Protocol|Siemens LOGO|
	934	+|Connection|Ethernet|
	935	+|Port No.|102|
	936	+|PLC station No.|2|
767	767
768	768	**Address List**
769	769
770	770	(% class="table-bordered" %)
771		-|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
772		-|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
773		-|(% style="width:461px" %)SCNA|0~~16777215.7
774		-|(% style="width:461px" %)DPTB|0~~16777215.7
775		-|(% style="width:461px" %)DCNA|0~~16777215.7
776		-|(% style="width:461px" %)METF|0~~16777215.7
777		-|(% style="width:461px" %)SENC|0~~16777215.7
778		-|(% style="width:461px" %)SENA|0~~16777215.7
779		-|(% style="width:461px" %)MENA|0~~16777215.7
780		-|(% style="width:461px" %)METD|0~~16777215.7
781		-|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
782		-|(% style="width:461px" %)SCNA|0~~16777215
783		-|(% style="width:461px" %)DPTB|0~~16777215
784		-|(% style="width:461px" %)DCNA|0~~16777215
785		-|(% style="width:461px" %)SENA|0~~16777215
786		-|(% style="width:461px" %)MENA|0~~16777215
787		-|(% style="width:461px" %)METD|0~~16777215
788		-|(% style="width:461px" %)INRO|0~~16777215
789		-|(% style="width:461px" %)TIMESYN|0~~16777215
790		-|(% style="width:461px" %)TIMEZ|0~~16777215
791		-|(% style="width:461px" %)NTP|0~~16777215
792		-|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
793		-|(% style="width:461px" %)SENC|0~~16777215
	941	+|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
	942	+|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
	943	+|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
	944	+|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
	945	+|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
	946	+|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
	947	+|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
	948	+|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
	949	+|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
	950	+|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
	951	+|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
	952	+|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
	953	+|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
	954	+|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
	955	+|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
	956	+|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
794	794
795		-**Address Configuration**
	958	+**PLC Settings in LOGO Software:**
796	796
797		-The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	960	+Click [Tools]~-~-[Ethernet Connections],shown as below.
798	798
799	799	(% style="text-align:center" %)
800		-[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	963	+[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
801	801
	965	+Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
	966	+
802	802	(% style="text-align:center" %)
803		-[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	968	+[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
804	804
805		-Extended tag name
	970	+**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
806	806
807		-Address range for the extended tag.
	972	+(% style="text-align:center" %)
	973	+[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
808	808
809		-**Communication Settings**
	975	+**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
810	810
811		-Enable HMI Ethernet in [Project Settings];
	977	+(% style="text-align:center" %)
	978	+[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
812	812
	980	+
813	813	(% style="text-align:center" %)
814		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	982	+[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
815	815
	984	+
	985	+**HMI Communication Settings**
	986	+
816	816	Set PLC IP in [Device IP] settings;
817	817
818	818	(% style="text-align:center" %)
819		-[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	990	+[[image:SiemensLOGODeviceIP.png]]
820	820
	992	+Enable HMI Ethernet in [Project Settings];
	993	+
	994	+(% style="text-align:center" %)
	995	+[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
	996	+
	997	+TSAP setting
	998	+
	999	+* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
	1000	+* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
	1001	+* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
	1002	+
	1003	+**✎Note:**
	1004	+
	1005	+* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
	1006	+
	1007	+(% style="text-align:center" %)
	1008	+[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
	1009	+
	1010	+
	1011	+* AI word address and Ibit address are read-only and cannot be written on HMI.
	1012	+* VW address should be even number.such as VW0, VW2, VW4...
	1013	+* VD address it takes two VW addresses.such as VD0,VD4,VD8...
	1014	+* Written value of RTC cannot exceed 255.
	1015	+
821	821	**Cable Wiring**
822	822
823	823	(% style="text-align:center" %)
824	824	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
825	825
826		-= **LG XGK FEnet Ethernet** =
	1021	+== **S7-XXX Ethernet** ==
827	827
828		-Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	1023	+Supported Series: Siemens S7-400, S7-1200 and S7-1500
829	829
830		-**HMI Settings**
	1025	+**HMI Setting**
831	831
832		-(% class="table-bordered" %)
833		-|**Items**|**Settings**|**Note**
834		-|Protocol|LG XGK FEnet(Ethernet)|
835		-|Connection|Ethernet|
836		-|Port No.|2004|
	1027	+(% class="table-bordered" style="width:823px" %)
	1028	+|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
	1029	+|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
	1030	+|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
	1031	+|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
	1032	+|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
	1033	+|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
837	837
	1035	+Slot from TIA Portal is equal to Device No. of PIStudio
	1036	+
	1037	+Rack from TIA Portal is equal to HMI No. of PIStudio
	1038	+
	1039	+(% style="text-align:center" %)
	1040	+[[image:S7-XXXCommunication Settings.png]]
	1041	+
	1042	+(% style="text-align:center" %)
	1043	+[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
	1044	+
838	838	**Address List**
839	839
840	840	(% class="table-bordered" %)
841		-|**Type**|**Register**|**Range**|**Format**|**Note**
842		-|(% rowspan="14" %)Word|P|0~~2047|P d|
843		-|M|0~~2047|M d|
844		-|K|0~~2047|K d|
845		-|F|0~~2047|F d|
846		-|T|0~~2047|T d|
847		-|C|0~~2047|C d|
848		-|Z|0~~127|Z d|
849		-|S|0~~127|S d|
850		-|L|0~~11263|L d|
851		-|N|0~~21503|N d|
852		-|D|0~~32767|D d|
853		-|R|0~~32767|R d|
854		-|ZR|0~~65535|ZR d|
855		-|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	1048	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	1049	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	1050	+d:0~-~-9999
856	856
857		-**✎Note:**
	1052	+o:0-7
	1053	+)))|
	1054	+|Q|Q|Q d.o|(((
	1055	+d:0~-~-9999
858	858
859		-* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
860		-* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
861		-* All bit registers are in the form of bits in word, and the range is the same as the word register;
	1057	+o:0-7
	1058	+)))|
	1059	+|M|M|M d.o|(((
	1060	+d:0~-~-9999
862	862
863		-**Communication settings in HMI**
	1062	+o:0-7
	1063	+)))|
	1064	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	1065	+nn:0-9999,
864	864
	1067	+dddd:0-9999,
	1068	+
	1069	+o:0-7
	1070	+)))|(((
	1071	+nn:DB No.
	1072	+
	1073	+dddd:address value
	1074	+
	1075	+o: digit address
	1076	+)))
	1077	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	1078	+|M|MW|MW d|d:0-99999|(((
	1079	+MW0=MB(0~~1)
	1080	+
	1081	+MW2=MB(2~~3)
	1082	+
	1083	+Address value is a multiple of 2
	1084	+)))
	1085	+|M|MD|MD d|d:0-99999|(((
	1086	+MD0=MB(0~~3)
	1087	+
	1088	+MD4=MB(4~~7)
	1089	+
	1090	+Address value is a multiple of 4
	1091	+)))
	1092	+|I|IW|IW d|d:0-99999|
	1093	+|Q|QW|QW d|d:0-99999|
	1094	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	1095	+nn:0-9999
	1096	+
	1097	+dddd:0-9999
	1098	+)))|(((
	1099	+nn:DB No.
	1100	+
	1101	+dddd:address value
	1102	+)))
	1103	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	1104	+nn:0-9999
	1105	+
	1106	+dddd:0-9999
	1107	+)))|(((
	1108	+nn:DB No.
	1109	+
	1110	+dddd:address value
	1111	+
	1112	+Address value is a multiple of 2
	1113	+)))
	1114	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	1115	+nn:0-9999
	1116	+
	1117	+dddd:0-9999
	1118	+)))|(((
	1119	+nn:DB No.
	1120	+
	1121	+dddd:address value
	1122	+
	1123	+Address value is a multiple of 4
	1124	+)))
	1125	+
	1126	+**Communication Settings**
	1127	+
865	865	Enable HMI Ethernet in [Project Settings];
866	866
867	867	(% style="text-align:center" %)
868		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1131	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
869	869
870	870	Set PLC IP in [Device IP] settings;
871	871
872	872	(% style="text-align:center" %)
873		-[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	1136	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
874	874
	1138	+**✎Note:**
	1139	+
	1140	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	1141	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	1142	+
875	875	**Cable Wiring**
876	876
877		-= **Mitsubishi** =
	1145	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
878	878
	1147	+= Create communication with **Mitsubishi** =
	1148	+
879	879	== **FX1S, 1N, 2N Series** ==
880	880
881	881	Supported Series: Mitsubishi FX1S, FX1N, FX2N series
...	...	@@ -2647,8 +2647,6 @@
2647	2647
2648	2648	**✎Note:** COM3 only available in PI8000/PI9000 series.
2649	2649
2650		-= =
2651		-
2652	2652	= **Printer** =
2653	2653
2654	2654	== **TSPL label printer** ==
...	...	@@ -2849,3 +2849,284 @@
2849	2849
2850	2850	(% style="text-align:center" %)
2851	2851	[[image:image-20220817154212-1.jpeg||height="315" width="554" class="img-thumbnail"]]
	3120	+
	3121	+= **Barcode Scanner** =
	3122	+
	3123	+Supported: DELI 14880 barcode scanner
	3124	+
	3125	+**HMI Setting**
	3126	+
	3127	+|**Items**|**Settings**|**Note**
	3128	+|Protocol|Barcode Scanner|
	3129	+|Connection|USB|
	3130	+
	3131	+**Operating Procedures**
	3132	+
	3133	+Select [Barcode Scanner];
	3134	+
	3135	+(% style="text-align:center" %)
	3136	+[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	3137	+
	3138	+Set address for receiving;
	3139	+
	3140	+Set correct length;
	3141	+
	3142	+(% style="text-align:center" %)
	3143	+[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	3144	+
	3145	+**✎Note:**
	3146	+
	3147	+* The protocol uploads the information acquired by the USB scanner to the HMI;
	3148	+* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
	3149	+* Recommended model: DELI 14880 barcode scanner;
	3150	+
	3151	+= **Hitachi EHV Series (Ethernet)** =
	3152	+
	3153	+Supported series: Hitachi EHV series
	3154	+
	3155	+**HMI Settings**
	3156	+
	3157	+(% class="table-bordered" %)
	3158	+|**Items**|**Settings**|**Note**
	3159	+|Protocol|Hitachi EHV series|
	3160	+|Connection|Ethernet|
	3161	+|Port No.|3004~~3007|
	3162	+
	3163	+**Address List**
	3164	+
	3165	+(% class="table-bordered" %)
	3166	+|**Type**|**Register**|**Range**|**Format**|**Note**
	3167	+|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
	3168	+|M|0 - 7FFF.f (Hex)|M HHHH.h|
	3169	+|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
	3170	+H1H2H3H4 Module main number
	3171	+
	3172	+H1: Remote number
	3173	+
	3174	+H2: Unit number
	3175	+
	3176	+H3: Slot number
	3177	+
	3178	+H4: Word number of Module
	3179	+
	3180	+H Sub number of Module
	3181	+
	3182	+For example:X21.3
	3183	+
	3184	+Slot number 2
	3185	+
	3186	+Word number of module is 1
	3187	+
	3188	+Bit number of module is 3
	3189	+
	3190	+Remote number and unit number are 0
	3191	+)))
	3192	+|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
	3193	+|R|0 – FF.f (Hex)|R HH.h|
	3194	+|L|0 - 73FF.f (Hex)|L HHHH.h|
	3195	+|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
	3196	+|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
	3197	+H1H2H3H4 Module main number
	3198	+
	3199	+H1: Remote number
	3200	+
	3201	+H2: Unit number
	3202	+
	3203	+H3: Slot number
	3204	+
	3205	+H4: Word number of module
	3206	+
	3207	+For example:WX21
	3208	+
	3209	+Word number of module is 1
	3210	+
	3211	+Slot number is 2
	3212	+
	3213	+Remote number and unit number are 0
	3214	+)))
	3215	+|WY|0 – FFFF (Hex)|WY H1H2H3H4
	3216	+|WR|0 – FFFF (Hex)|WR HHHH|
	3217	+|WL|0 - 73FF (Hex)|WL HHHH|
	3218	+|TC|0 - 2559|TC DDDD|
	3219	+
	3220	+**Communication settings in HMI**
	3221	+
	3222	+Enable HMI Ethernet in [Project Settings];
	3223	+
	3224	+(% style="text-align:center" %)
	3225	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3226	+
	3227	+Set PLC IP in [Device IP] settings;
	3228	+
	3229	+(% style="text-align:center" %)
	3230	+[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	3231	+
	3232	+**PLC Configuration**
	3233	+
	3234	+Connect with PLC, select[Online mode];
	3235	+
	3236	+(% style="text-align:center" %)
	3237	+[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	3238	+
	3239	+Set IP address, it is the same LAN parameters with HMI;
	3240	+
	3241	+(% style="text-align:center" %)
	3242	+[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	3243	+
	3244	+3) Save PLC communication parameter, and restart PLC
	3245	+
	3246	+**PLC Monitor Mode**
	3247	+
	3248	+Connect with PLC and choose to “online” mode
	3249	+
	3250	+(% style="text-align:center" %)
	3251	+[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	3252	+
	3253	+Open I/O monitor sheet1
	3254	+
	3255	+(% style="text-align:center" %)
	3256	+[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	3257	+
	3258	+During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	3259	+
	3260	+(% style="text-align:center" %)
	3261	+[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	3262	+
	3263	+Enter the register address, click OK to view the value of the register.
	3264	+
	3265	+(% style="text-align:center" %)
	3266	+[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	3267	+
	3268	+(% style="text-align:center" %)
	3269	+[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	3270	+
	3271	+**✎Note:**
	3272	+
	3273	+* Both word registers and bit registers support even continuous read/write functions;
	3274	+* The range of registers is based on the specific PLC type;
	3275	+
	3276	+**Cable Wiring**
	3277	+
	3278	+(% style="text-align:center" %)
	3279	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	3280	+
	3281	+= **IEC60870-5 104 Client** =
	3282	+
	3283	+**HMI Setting**
	3284	+
	3285	+(% class="table-bordered" %)
	3286	+|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
	3287	+|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
	3288	+|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
	3289	+|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	3290	+
	3291	+**Address List**
	3292	+
	3293	+(% class="table-bordered" %)
	3294	+|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
	3295	+|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
	3296	+|(% style="width:461px" %)SCNA|0~~16777215.7
	3297	+|(% style="width:461px" %)DPTB|0~~16777215.7
	3298	+|(% style="width:461px" %)DCNA|0~~16777215.7
	3299	+|(% style="width:461px" %)METF|0~~16777215.7
	3300	+|(% style="width:461px" %)SENC|0~~16777215.7
	3301	+|(% style="width:461px" %)SENA|0~~16777215.7
	3302	+|(% style="width:461px" %)MENA|0~~16777215.7
	3303	+|(% style="width:461px" %)METD|0~~16777215.7
	3304	+|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
	3305	+|(% style="width:461px" %)SCNA|0~~16777215
	3306	+|(% style="width:461px" %)DPTB|0~~16777215
	3307	+|(% style="width:461px" %)DCNA|0~~16777215
	3308	+|(% style="width:461px" %)SENA|0~~16777215
	3309	+|(% style="width:461px" %)MENA|0~~16777215
	3310	+|(% style="width:461px" %)METD|0~~16777215
	3311	+|(% style="width:461px" %)INRO|0~~16777215
	3312	+|(% style="width:461px" %)TIMESYN|0~~16777215
	3313	+|(% style="width:461px" %)TIMEZ|0~~16777215
	3314	+|(% style="width:461px" %)NTP|0~~16777215
	3315	+|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
	3316	+|(% style="width:461px" %)SENC|0~~16777215
	3317	+
	3318	+**Address Configuration**
	3319	+
	3320	+The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	3321	+
	3322	+(% style="text-align:center" %)
	3323	+[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	3324	+
	3325	+(% style="text-align:center" %)
	3326	+[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	3327	+
	3328	+Extended tag name
	3329	+
	3330	+Address range for the extended tag.
	3331	+
	3332	+**Communication Settings**
	3333	+
	3334	+Enable HMI Ethernet in [Project Settings];
	3335	+
	3336	+(% style="text-align:center" %)
	3337	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3338	+
	3339	+Set PLC IP in [Device IP] settings;
	3340	+
	3341	+(% style="text-align:center" %)
	3342	+[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	3343	+
	3344	+**Cable Wiring**
	3345	+
	3346	+(% style="text-align:center" %)
	3347	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	3348	+
	3349	+= **LG XGK FEnet Ethernet** =
	3350	+
	3351	+Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	3352	+
	3353	+**HMI Settings**
	3354	+
	3355	+(% class="table-bordered" %)
	3356	+|**Items**|**Settings**|**Note**
	3357	+|Protocol|LG XGK FEnet(Ethernet)|
	3358	+|Connection|Ethernet|
	3359	+|Port No.|2004|
	3360	+
	3361	+**Address List**
	3362	+
	3363	+(% class="table-bordered" %)
	3364	+|**Type**|**Register**|**Range**|**Format**|**Note**
	3365	+|(% rowspan="14" %)Word|P|0~~2047|P d|
	3366	+|M|0~~2047|M d|
	3367	+|K|0~~2047|K d|
	3368	+|F|0~~2047|F d|
	3369	+|T|0~~2047|T d|
	3370	+|C|0~~2047|C d|
	3371	+|Z|0~~127|Z d|
	3372	+|S|0~~127|S d|
	3373	+|L|0~~11263|L d|
	3374	+|N|0~~21503|N d|
	3375	+|D|0~~32767|D d|
	3376	+|R|0~~32767|R d|
	3377	+|ZR|0~~65535|ZR d|
	3378	+|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	3379	+
	3380	+**✎Note:**
	3381	+
	3382	+* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
	3383	+* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
	3384	+* All bit registers are in the form of bits in word, and the range is the same as the word register;
	3385	+
	3386	+**Communication settings in HMI**
	3387	+
	3388	+Enable HMI Ethernet in [Project Settings];
	3389	+
	3390	+(% style="text-align:center" %)
	3391	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3392	+
	3393	+Set PLC IP in [Device IP] settings;
	3394	+
	3395	+(% style="text-align:center" %)
	3396	+[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	3397	+
	3398	+**Cable Wiring**
	3399	+
	3400	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]