Changes for page 12 PLC Protocol OLD

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -399,7 +399,6 @@
399	399
400	400	(% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring.
401	401
402		-
403	403	**Software configuration of PLC**
404	404
405	405	**1）PLC programming software**
...	...	@@ -471,7 +471,6 @@
471	471
472	472	= Create communication with **Rockwell PLC** =
473	473
474		-
475	475	== **MicroLogix Protocol** ==
476	476
477	477	MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
...	...	@@ -587,117 +587,280 @@
587	587	|(% style="width:393px" %)B|(% style="width:350px" %)fff.dd|(% style="width:333px" %)B 000.0 ~~ fff.15
588	588	|(% style="width:393px" %)S|(% style="width:350px" %)dd.dd|(% style="width:333px" %)S 0.0 ~~ 255.15
589	589	|(% style="width:393px" %)N|(% style="width:350px" %)ffff.dd|(% style="width:333px" %)N 000.0 ~~ fff.15
590		-|(% style="width:393px" %)**PLC word address type**|(% style="width:350px" %)**Address format**|(% style="width:333px" %)**Address range**
591		-|(% style="width:393px" %)S|(% style="width:350px" %)ddd|(% style="width:333px" %)S0 ~~ 255
592		-|(% style="width:393px" %)TS|(% style="width:350px" %)ffff|(% style="width:333px" %)TS0 ~~ FFFF
593		-|(% style="width:393px" %)TP|(% style="width:350px" %)ffff|(% style="width:333px" %)TP0 ~~ FFFF
594		-|(% style="width:393px" %)CS|(% style="width:350px" %)ffff|(% style="width:333px" %)CS0 ~~ FFFF
595		-|(% style="width:393px" %)CP|(% style="width:350px" %)ffff|(% style="width:333px" %)CP0 ~~ FFFF
596		-|(% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF
597		-|(% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF
	588	+|**PLC word address type**|**Address format**|**Address range**
	589	+|S|ddd|S0 ~~ 255
	590	+|TS|ffff|TS0 ~~ FFFF
	591	+|TP|ffff|TP0 ~~ FFFF
	592	+|CS|ffff|CS0 ~~ FFFF
	593	+|CP|ffff|CP0 ~~ FFFF
	594	+|N|ffff|N0 ~~ FFFF
	595	+|F|ffff|F0 ~~ FFFF
598	598
599		-= **Barcode Scanner** =
	597	+= Create communication with (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** =
600	600
601		-Supported: DELI 14880 barcode scanner
	599	+== **S7-200 Smart Ethernet Protocol** ==
602	602
	601	+Supported Series: Siemens S7-200 SMART Series Ethernet Module.
	602	+
	603	+Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
	604	+
603	603	**HMI Setting**
604	604
605	605	(% class="table-bordered" %)
606	606	|**Items**|**Settings**|**Note**
607		-|Protocol|Barcode Scanner|
608		-|Connection|USB|
	609	+|Protocol|Simens S7-200 Smart Ethernet|
	610	+|Connection|Ethernet|
	611	+|Port No.|102|
	612	+|PLC station No.|2|
609	609
610		-**Operating Procedures**
	614	+**Address List**
611	611
612		-Select [Barcode Scanner];
	616	+(% class="table-bordered" %)
	617	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	618	+|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	619	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	620	+|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
	621	+|V|V|V ddddd.o|0.0~~99999.7|
	622	+|M|M|M ddddd.o|0.0~~99999.7|
	623	+|SM|SM|ddddd.o|0.0~~99999.7|
	624	+|S|S|ddddd.o|0.0~~99999.7|Read only
	625	+|T|T|ddddd|0~~99999|Timer state, read only
	626	+|C|C|ddddd|0~~99999|Counter state, read only
	627	+|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
	628	+|Q|QW|QW ddddd|0~~99999|
	629	+|AI|AIW|AIW ddddd|0~~99999|
	630	+|AQ|VB|VB ddddd|0~~99999|
	631	+|V|VW|VW ddddd|0~~99998|(((
	632	+VW0=VB (0~~1)
613	613
	634	+VW2=VB (2~~3)
	635	+
	636	+Address value is a multiple of 2
	637	+)))
	638	+|V|VD|VD ddddd|0~~99998|(((
	639	+VD0=VB (0~~3)
	640	+
	641	+VD2=VB (4~~7)
	642	+
	643	+Address value is a multiple of 4
	644	+)))
	645	+|M|MB|MB ddddd|0~~99999|
	646	+|M|MW|MW ddddd|0~~99999|(((
	647	+MW0=MB(0~~1)
	648	+
	649	+MW2=MB(2~~3)
	650	+
	651	+Address value is a multiple of 2
	652	+)))
	653	+|M|MD|MD ddddd|0~~99999|(((
	654	+MD0=MB(0~~3)
	655	+
	656	+MD4=MB(4~~7)
	657	+
	658	+Address value is a multiple of 4
	659	+)))
	660	+|T|TW|TW ddddd|0~~99999|Value of timer
	661	+|C|CW|CW ddddd|0~~99999|Value of counter
	662	+|W|SW|SW ddddd|0~~99999|
	663	+
	664	+**Communication Settings**
	665	+
	666	+Enable HMI Ethernet in [Project Settings];
	667	+
614	614	(% style="text-align:center" %)
615		-[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	669	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
616	616
617		-Set address for receiving;
	671	+Set PLC IP in [Device IP] settings;
618	618
619		-Set correct length;
	673	+(% style="text-align:center" %)
	674	+[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
620	620
	676	+* PLC IP Address: PLC IP
	677	+* PLC pot No.: 102(fixed)
	678	+* Network:TCP_Client_2N(fixed)
	679	+
621	621	(% style="text-align:center" %)
622		-[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	681	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
623	623
624		-**✎Note:**
	683	+* Wait timeout: depend on actual network situation (more than 1500 ms)
625	625
626		-* The protocol uploads the information acquired by the USB scanner to the HMI;
627		-* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
628		-* Recommended model: DELI 14880 barcode scanner;
	685	+**Cable Wiring**
629	629
630		-= **Hitachi EHV Series (Ethernet)** =
	687	+(% style="text-align:center" %)
	688	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
631	631
632		-Supported series: Hitachi EHV series
	690	+== **S7-300 Ethernet** ==
633	633
634		-**HMI Settings**
	692	+Supported Series: Siemens S7-300 series PLC
635	635
	694	+**HMI Setting**
	695	+
636	636	(% class="table-bordered" %)
637	637	|**Items**|**Settings**|**Note**
638		-|Protocol|Hitachi EHV series|
	698	+|Protocol|Simens S7-300 Ethernet|
639	639	|Connection|Ethernet|
640		-|Port No.|3004~~3007|
	700	+|Port No.|102|
	701	+|PLC station No.|2|Need to be same as the PLC setting
641	641
642	642	**Address List**
643	643
644	644	(% class="table-bordered" %)
645		-|**Type**|**Register**|**Range**|**Format**|**Note**
646		-|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
647		-|M|0 - 7FFF.f (Hex)|M HHHH.h|
648		-|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
649		-H1H2H3H4 Module main number
	706	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	707	+|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
	708	+|Q|Q|Q ddddd.o|0.0~~99999.7|
	709	+|M|M|M ddddd.o|0.0~~99999.7|
	710	+|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
	711	+nn: block number;
650	650
651		-H1: Remote number
	713	+dddd: address;
	714	+)))
	715	+|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
	716	+|Q|QW|QW ddddd|0~~99999|
	717	+|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
	718	+|MW|MW ddddd|0~~99999|(((
	719	+MW0=MB(0~~1)
652	652
653		-H2: Unit number
	721	+MW2=MB(2~~3)
654	654
655		-H3: Slot number
	723	+Address value is a multiple of 2
	724	+)))
	725	+|MD|MD ddddd|0~~99999|(((
	726	+MD0=MB(0~~3)
656	656
657		-H4: Word number of Module
	728	+MD4=MB(4~~7)
658	658
659		-H Sub number of Module
	730	+Address value is a multiple of 4
	731	+)))
	732	+|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
	733	+nn: block number;
660	660
661		-For example:X21.3
	735	+dddd: address
	736	+)))
	737	+|DBxDBW|DBxDBW nndddd|0~~99999999
	738	+|DBxDBD|DBxDBD nndddd|0~~99999999
662	662
663		-Slot number 2
	740	+**Communication Settings**
664	664
665		-Word number of module is 1
	742	+Enable HMI Ethernet in [Project Settings];
666	666
667		-Bit number of module is 3
	744	+(% style="text-align:center" %)
	745	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
668	668
669		-Remote number and unit number are 0
	747	+Set PLC IP in [Device IP] settings;
	748	+
	749	+(% style="text-align:center" %)
	750	+[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
	751	+
	752	+* PLC IP Address: PLC IP
	753	+* PLC pot No.: 102(fixed)
	754	+* Network:TCP_Client_2N(fixed)
	755	+
	756	+(% style="text-align:center" %)
	757	+[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
	758	+
	759	+* Wait timeout: depend on actual network situation (more than 1500 ms)
	760	+
	761	+**Cable Wiring**
	762	+
	763	+(% style="text-align:center" %)
	764	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	765	+
	766	+== **S7-1200 Ethernet** ==
	767	+
	768	+Supported Series: Siemens S7-1200
	769	+
	770	+**HMI Setting**
	771	+
	772	+(% class="table-bordered" %)
	773	+|**Items**|**Settings**|**Note**
	774	+|Protocol|Siemens S7-1200|
	775	+|Connection|Ethernet|
	776	+|Port No.|102|
	777	+|PLC station No.|2|
	778	+
	779	+**Address List**
	780	+
	781	+(% class="table-bordered" %)
	782	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	783	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	784	+d:0~-~-9999
	785	+
	786	+o:0-7
	787	+)))|
	788	+|Q|Q|Q d.o|(((
	789	+d:0~-~-9999
	790	+
	791	+o:0-7
	792	+)))|
	793	+|M|M|M d.o|(((
	794	+d:0~-~-9999
	795	+
	796	+o:0-7
	797	+)))|
	798	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	799	+nn:0-9999,
	800	+
	801	+dddd:0-9999,
	802	+
	803	+o:0-7
	804	+)))|(((
	805	+nn:DB No.
	806	+
	807	+dddd:address value
	808	+
	809	+o: digit address
670	670	)))
671		-|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
672		-|R|0 – FF.f (Hex)|R HH.h|
673		-|L|0 - 73FF.f (Hex)|L HHHH.h|
674		-|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
675		-|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
676		-H1H2H3H4 Module main number
	811	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	812	+|M|MW|MW d|d:0-99999|(((
	813	+MW0=MB(0~~1)
677	677
678		-H1: Remote number
	815	+MW2=MB(2~~3)
679	679
680		-H2: Unit number
	817	+Address value is a multiple of 2
	818	+)))
	819	+|M|MD|MD d|d:0-99999|(((
	820	+MD0=MB(0~~3)
681	681
682		-H3: Slot number
	822	+MD4=MB(4~~7)
683	683
684		-H4: Word number of module
	824	+Address value is a multiple of 4
	825	+)))
	826	+|I|IW|IW d|d:0-99999|
	827	+|Q|QW|QW d|d:0-99999|
	828	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	829	+nn:0-9999
685	685
686		-For example:WX21
	831	+dddd:0-9999
	832	+)))|(((
	833	+nn:DB No.
687	687
688		-Word number of module is 1
	835	+dddd:address value
	836	+)))
	837	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	838	+nn:0-9999
689	689
690		-Slot number is 2
	840	+dddd:0-9999
	841	+)))|(((
	842	+nn:DB No.
691	691
692		-Remote number and unit number are 0
	844	+dddd:address value
	845	+
	846	+Address value is a multiple of 2
693	693	)))
694		-|WY|0 – FFFF (Hex)|WY H1H2H3H4
695		-|WR|0 – FFFF (Hex)|WR HHHH|
696		-|WL|0 - 73FF (Hex)|WL HHHH|
697		-|TC|0 - 2559|TC DDDD|
	848	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	849	+nn:0-9999
698	698
699		-**Communication settings in HMI**
	851	+dddd:0-9999
	852	+)))|(((
	853	+nn:DB No.
700	700
	855	+dddd:address value
	856	+
	857	+Address value is a multiple of 4
	858	+)))
	859	+
	860	+**Communication Settings**
	861	+
701	701	Enable HMI Ethernet in [Project Settings];
702	702
703	703	(% style="text-align:center" %)
...	...	@@ -706,178 +706,284 @@
706	706	Set PLC IP in [Device IP] settings;
707	707
708	708	(% style="text-align:center" %)
709		-[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	870	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
710	710
711		-**PLC Configuration**
	872	+**✎Note:**
712	712
713		-Connect with PLC, select[Online mode];
	874	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	875	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
714	714
715		-(% style="text-align:center" %)
716		-[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	877	+**PLC Settings**
717	717
718		-Set IP address, it is the same LAN parameters with HMI;
	879	+Add BD
719	719
	881	+* Please uncheck [Symbolic access only] option;
	882	+
720	720	(% style="text-align:center" %)
721		-[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	884	+[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
722	722
723		-3) Save PLC communication parameter, and restart PLC
	886	+Address settings, using BD2 as example.
724	724
725		-**PLC Monitor Mode**
	888	+* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	889	+* 2 represent DB block number
	890	+* xxxx represent address
726	726
727		-Connect with PLC and choose to “online” mode
	892	+**Such as:**
728	728
	894	+* DBxDBB20000 = DB2.DBB0
	895	+* DBxDBW20004 = DB2.DBW4
	896	+
729	729	(% style="text-align:center" %)
730		-[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	898	+[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
731	731
732		-Open I/O monitor sheet1
	900	+**How to connect with S7-1200 Firmware V4.0**
733	733
734		-(% style="text-align:center" %)
735		-[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	902	+PLC configuration
736	736
737		-During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	904	+* Double click [device configuration] in Siemens via software
	905	+* Double click [protection] to enter protection configuration screen
738	738
739	739	(% style="text-align:center" %)
740		-[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	908	+[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
741	741
742		-Enter the register address, click OK to view the value of the register.
	910	+* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
743	743
744	744	(% style="text-align:center" %)
745		-[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	913	+[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
746	746
747		-(% style="text-align:center" %)
748		-[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	915	+DB settings
749	749
750		-**✎Note:**
	917	+* Right click [DB], select [properties]
	918	+* Uncheck [optimized block access]
751	751
752		-* Both word registers and bit registers support even continuous read/write functions;
753		-* The range of registers is based on the specific PLC type;
754		-
755	755	**Cable Wiring**
756	756
757	757	(% style="text-align:center" %)
758	758	[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
759	759
760		-= **IEC60870-5 104 Client** =
	925	+== **S7-XXX Ethernet** ==
761	761
	927	+Supported Series: Siemens S7-400, S7-1200 and S7-1500
	928	+
762	762	**HMI Setting**
763	763
764		-(% class="table-bordered" %)
765		-|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
766		-|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
767		-|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
768		-|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	931	+(% class="table-bordered" style="width:823px" %)
	932	+|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
	933	+|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
	934	+|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
	935	+|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
	936	+|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
	937	+|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
769	769
	939	+Slot from TIA Portal is equal to Device No. of PIStudio
	940	+
	941	+Rack from TIA Portal is equal to HMI No. of PIStudio
	942	+
	943	+(% style="text-align:center" %)
	944	+[[image:S7-XXXCommunication Settings.png]]
	945	+
	946	+(% style="text-align:center" %)
	947	+[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
	948	+
770	770	**Address List**
771	771
772	772	(% class="table-bordered" %)
773		-|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
774		-|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
775		-|(% style="width:461px" %)SCNA|0~~16777215.7
776		-|(% style="width:461px" %)DPTB|0~~16777215.7
777		-|(% style="width:461px" %)DCNA|0~~16777215.7
778		-|(% style="width:461px" %)METF|0~~16777215.7
779		-|(% style="width:461px" %)SENC|0~~16777215.7
780		-|(% style="width:461px" %)SENA|0~~16777215.7
781		-|(% style="width:461px" %)MENA|0~~16777215.7
782		-|(% style="width:461px" %)METD|0~~16777215.7
783		-|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
784		-|(% style="width:461px" %)SCNA|0~~16777215
785		-|(% style="width:461px" %)DPTB|0~~16777215
786		-|(% style="width:461px" %)DCNA|0~~16777215
787		-|(% style="width:461px" %)SENA|0~~16777215
788		-|(% style="width:461px" %)MENA|0~~16777215
789		-|(% style="width:461px" %)METD|0~~16777215
790		-|(% style="width:461px" %)INRO|0~~16777215
791		-|(% style="width:461px" %)TIMESYN|0~~16777215
792		-|(% style="width:461px" %)TIMEZ|0~~16777215
793		-|(% style="width:461px" %)NTP|0~~16777215
794		-|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
795		-|(% style="width:461px" %)SENC|0~~16777215
	952	+|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
	953	+|(% rowspan="4" %)Bit|I|I|M d.o|(((
	954	+d:0~-~-9999
796	796
797		-**Address Configuration**
	956	+o:0-7
	957	+)))|
	958	+|Q|Q|Q d.o|(((
	959	+d:0~-~-9999
798	798
799		-The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	961	+o:0-7
	962	+)))|
	963	+|M|M|M d.o|(((
	964	+d:0~-~-9999
800	800
801		-(% style="text-align:center" %)
802		-[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	966	+o:0-7
	967	+)))|
	968	+|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
	969	+nn:0-9999,
803	803
804		-(% style="text-align:center" %)
805		-[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	971	+dddd:0-9999,
806	806
807		-Extended tag name
	973	+o:0-7
	974	+)))|(((
	975	+nn:DB No.
808	808
809		-Address range for the extended tag.
	977	+dddd:address value
810	810
	979	+o: digit address
	980	+)))
	981	+|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
	982	+|M|MW|MW d|d:0-99999|(((
	983	+MW0=MB(0~~1)
	984	+
	985	+MW2=MB(2~~3)
	986	+
	987	+Address value is a multiple of 2
	988	+)))
	989	+|M|MD|MD d|d:0-99999|(((
	990	+MD0=MB(0~~3)
	991	+
	992	+MD4=MB(4~~7)
	993	+
	994	+Address value is a multiple of 4
	995	+)))
	996	+|I|IW|IW d|d:0-99999|
	997	+|Q|QW|QW d|d:0-99999|
	998	+|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
	999	+nn:0-9999
	1000	+
	1001	+dddd:0-9999
	1002	+)))|(((
	1003	+nn:DB No.
	1004	+
	1005	+dddd:address value
	1006	+)))
	1007	+|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
	1008	+nn:0-9999
	1009	+
	1010	+dddd:0-9999
	1011	+)))|(((
	1012	+nn:DB No.
	1013	+
	1014	+dddd:address value
	1015	+
	1016	+Address value is a multiple of 2
	1017	+)))
	1018	+|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
	1019	+nn:0-9999
	1020	+
	1021	+dddd:0-9999
	1022	+)))|(((
	1023	+nn:DB No.
	1024	+
	1025	+dddd:address value
	1026	+
	1027	+Address value is a multiple of 4
	1028	+)))
	1029	+
811	811	**Communication Settings**
812	812
813	813	Enable HMI Ethernet in [Project Settings];
814	814
815	815	(% style="text-align:center" %)
816		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1035	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
817	817
818	818	Set PLC IP in [Device IP] settings;
819	819
820	820	(% style="text-align:center" %)
821		-[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	1040	+[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
822	822
	1042	+**✎Note:**
	1043	+
	1044	+* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
	1045	+* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	1046	+
823	823	**Cable Wiring**
824	824
825		-(% style="text-align:center" %)
826		-[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	1049	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
827	827
828		-= **LG XGK FEnet Ethernet** =
	1051	+== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet** ==
829	829
830		-Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	1053	+Supported Series: Siemens Logo 0BA0 series
831	831
832	832	**HMI Settings**
833	833
834	834	(% class="table-bordered" %)
835	835	|**Items**|**Settings**|**Note**
836		-|Protocol|LG XGK FEnet(Ethernet)|
	1059	+|Protocol|Siemens LOGO|
837	837	|Connection|Ethernet|
838		-|Port No.|2004|
	1061	+|Port No.|102|
	1062	+|PLC station No.|2|
839	839
840	840	**Address List**
841	841
842	842	(% class="table-bordered" %)
843		-|**Type**|**Register**|**Range**|**Format**|**Note**
844		-|(% rowspan="14" %)Word|P|0~~2047|P d|
845		-|M|0~~2047|M d|
846		-|K|0~~2047|K d|
847		-|F|0~~2047|F d|
848		-|T|0~~2047|T d|
849		-|C|0~~2047|C d|
850		-|Z|0~~127|Z d|
851		-|S|0~~127|S d|
852		-|L|0~~11263|L d|
853		-|N|0~~21503|N d|
854		-|D|0~~32767|D d|
855		-|R|0~~32767|R d|
856		-|ZR|0~~65535|ZR d|
857		-|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	1067	+|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
	1068	+|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
	1069	+|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
	1070	+|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
	1071	+|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
	1072	+|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
	1073	+|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
	1074	+|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
	1075	+|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
	1076	+|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
	1077	+|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
	1078	+|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
	1079	+|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
	1080	+|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
	1081	+|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
	1082	+|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
858	858
859		-**✎Note:**
	1084	+**PLC Settings in LOGO Software:**
860	860
861		-* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
862		-* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
863		-* All bit registers are in the form of bits in word, and the range is the same as the word register;
	1086	+Click [Tools]~-~-[Ethernet Connections],shown as below.
864	864
865		-**Communication settings in HMI**
	1088	+(% style="text-align:center" %)
	1089	+[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
866	866
867		-Enable HMI Ethernet in [Project Settings];
	1091	+Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
868	868
869	869	(% style="text-align:center" %)
870		-[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	1094	+[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
871	871
	1096	+**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
	1097	+
	1098	+(% style="text-align:center" %)
	1099	+[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
	1100	+
	1101	+**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	1102	+
	1103	+(% style="text-align:center" %)
	1104	+[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
	1105	+
	1106	+
	1107	+(% style="text-align:center" %)
	1108	+[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
	1109	+
	1110	+
	1111	+**HMI Communication Settings**
	1112	+
872	872	Set PLC IP in [Device IP] settings;
873	873
874	874	(% style="text-align:center" %)
875		-[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	1116	+[[image:SiemensLOGODeviceIP.png]]
876	876
	1118	+Enable HMI Ethernet in [Project Settings];
	1119	+
	1120	+(% style="text-align:center" %)
	1121	+[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
	1122	+
	1123	+TSAP setting
	1124	+
	1125	+* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
	1126	+* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
	1127	+* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
	1128	+
	1129	+**✎Note:**
	1130	+
	1131	+* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
	1132	+
	1133	+(% style="text-align:center" %)
	1134	+[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
	1135	+
	1136	+
	1137	+* AI word address and Ibit address are read-only and cannot be written on HMI.
	1138	+* VW address should be even number.such as VW0, VW2, VW4...
	1139	+* VD address it takes two VW addresses.such as VD0,VD4,VD8...
	1140	+* Written value of RTC cannot exceed 255.
	1141	+
877	877	**Cable Wiring**
878	878
879		-= **Mitsubishi** =
	1144	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
880	880
	1146	+= Create communication with **Mitsubishi** =
	1147	+
881	881	== **FX1S, 1N, 2N Series** ==
882	882
883	883	Supported Series: Mitsubishi FX1S, FX1N, FX2N series
...	...	@@ -2649,8 +2649,6 @@
2649	2649
2650	2650	**✎Note:** COM3 only available in PI8000/PI9000 series.
2651	2651
2652		-= =
2653		-
2654	2654	= **Printer** =
2655	2655
2656	2656	== **TSPL label printer** ==
...	...	@@ -2851,3 +2851,284 @@
2851	2851
2852	2852	(% style="text-align:center" %)
2853	2853	[[image:image-20220817154212-1.jpeg||height="315" width="554" class="img-thumbnail"]]
	3119	+
	3120	+= **Barcode Scanner** =
	3121	+
	3122	+Supported: DELI 14880 barcode scanner
	3123	+
	3124	+**HMI Setting**
	3125	+
	3126	+|**Items**|**Settings**|**Note**
	3127	+|Protocol|Barcode Scanner|
	3128	+|Connection|USB|
	3129	+
	3130	+**Operating Procedures**
	3131	+
	3132	+Select [Barcode Scanner];
	3133	+
	3134	+(% style="text-align:center" %)
	3135	+[[image:12.PLC Protocol_html_55a3056357320966.png||data-xwiki-image-style-alignment="center" height="266" width="600" class="img-thumbnail"]]
	3136	+
	3137	+Set address for receiving;
	3138	+
	3139	+Set correct length;
	3140	+
	3141	+(% style="text-align:center" %)
	3142	+[[image:12.PLC Protocol_html_30a4c9e9dd4db40b.png||data-xwiki-image-style-alignment="center" height="701" width="500" class="img-thumbnail"]]
	3143	+
	3144	+**✎Note:**
	3145	+
	3146	+* The protocol uploads the information acquired by the USB scanner to the HMI;
	3147	+* The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object;
	3148	+* Recommended model: DELI 14880 barcode scanner;
	3149	+
	3150	+= **Hitachi EHV Series (Ethernet)** =
	3151	+
	3152	+Supported series: Hitachi EHV series
	3153	+
	3154	+**HMI Settings**
	3155	+
	3156	+(% class="table-bordered" %)
	3157	+|**Items**|**Settings**|**Note**
	3158	+|Protocol|Hitachi EHV series|
	3159	+|Connection|Ethernet|
	3160	+|Port No.|3004~~3007|
	3161	+
	3162	+**Address List**
	3163	+
	3164	+(% class="table-bordered" %)
	3165	+|**Type**|**Register**|**Range**|**Format**|**Note**
	3166	+|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD|
	3167	+|M|0 - 7FFF.f (Hex)|M HHHH.h|
	3168	+|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)(((
	3169	+H1H2H3H4 Module main number
	3170	+
	3171	+H1: Remote number
	3172	+
	3173	+H2: Unit number
	3174	+
	3175	+H3: Slot number
	3176	+
	3177	+H4: Word number of Module
	3178	+
	3179	+H Sub number of Module
	3180	+
	3181	+For example:X21.3
	3182	+
	3183	+Slot number 2
	3184	+
	3185	+Word number of module is 1
	3186	+
	3187	+Bit number of module is 3
	3188	+
	3189	+Remote number and unit number are 0
	3190	+)))
	3191	+|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h
	3192	+|R|0 – FF.f (Hex)|R HH.h|
	3193	+|L|0 - 73FF.f (Hex)|L HHHH.h|
	3194	+|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH|
	3195	+|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)(((
	3196	+H1H2H3H4 Module main number
	3197	+
	3198	+H1: Remote number
	3199	+
	3200	+H2: Unit number
	3201	+
	3202	+H3: Slot number
	3203	+
	3204	+H4: Word number of module
	3205	+
	3206	+For example:WX21
	3207	+
	3208	+Word number of module is 1
	3209	+
	3210	+Slot number is 2
	3211	+
	3212	+Remote number and unit number are 0
	3213	+)))
	3214	+|WY|0 – FFFF (Hex)|WY H1H2H3H4
	3215	+|WR|0 – FFFF (Hex)|WR HHHH|
	3216	+|WL|0 - 73FF (Hex)|WL HHHH|
	3217	+|TC|0 - 2559|TC DDDD|
	3218	+
	3219	+**Communication settings in HMI**
	3220	+
	3221	+Enable HMI Ethernet in [Project Settings];
	3222	+
	3223	+(% style="text-align:center" %)
	3224	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3225	+
	3226	+Set PLC IP in [Device IP] settings;
	3227	+
	3228	+(% style="text-align:center" %)
	3229	+[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
	3230	+
	3231	+**PLC Configuration**
	3232	+
	3233	+Connect with PLC, select[Online mode];
	3234	+
	3235	+(% style="text-align:center" %)
	3236	+[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]
	3237	+
	3238	+Set IP address, it is the same LAN parameters with HMI;
	3239	+
	3240	+(% style="text-align:center" %)
	3241	+[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]
	3242	+
	3243	+3) Save PLC communication parameter, and restart PLC
	3244	+
	3245	+**PLC Monitor Mode**
	3246	+
	3247	+Connect with PLC and choose to “online” mode
	3248	+
	3249	+(% style="text-align:center" %)
	3250	+[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]
	3251	+
	3252	+Open I/O monitor sheet1
	3253	+
	3254	+(% style="text-align:center" %)
	3255	+[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]
	3256	+
	3257	+During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected
	3258	+
	3259	+(% style="text-align:center" %)
	3260	+[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]
	3261	+
	3262	+Enter the register address, click OK to view the value of the register.
	3263	+
	3264	+(% style="text-align:center" %)
	3265	+[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	3266	+
	3267	+(% style="text-align:center" %)
	3268	+[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]
	3269	+
	3270	+**✎Note:**
	3271	+
	3272	+* Both word registers and bit registers support even continuous read/write functions;
	3273	+* The range of registers is based on the specific PLC type;
	3274	+
	3275	+**Cable Wiring**
	3276	+
	3277	+(% style="text-align:center" %)
	3278	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	3279	+
	3280	+= **IEC60870-5 104 Client** =
	3281	+
	3282	+**HMI Setting**
	3283	+
	3284	+(% class="table-bordered" %)
	3285	+|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note**
	3286	+|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %)
	3287	+|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %)
	3288	+|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %)
	3289	+
	3290	+**Address List**
	3291	+
	3292	+(% class="table-bordered" %)
	3293	+|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range**
	3294	+|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7
	3295	+|(% style="width:461px" %)SCNA|0~~16777215.7
	3296	+|(% style="width:461px" %)DPTB|0~~16777215.7
	3297	+|(% style="width:461px" %)DCNA|0~~16777215.7
	3298	+|(% style="width:461px" %)METF|0~~16777215.7
	3299	+|(% style="width:461px" %)SENC|0~~16777215.7
	3300	+|(% style="width:461px" %)SENA|0~~16777215.7
	3301	+|(% style="width:461px" %)MENA|0~~16777215.7
	3302	+|(% style="width:461px" %)METD|0~~16777215.7
	3303	+|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215
	3304	+|(% style="width:461px" %)SCNA|0~~16777215
	3305	+|(% style="width:461px" %)DPTB|0~~16777215
	3306	+|(% style="width:461px" %)DCNA|0~~16777215
	3307	+|(% style="width:461px" %)SENA|0~~16777215
	3308	+|(% style="width:461px" %)MENA|0~~16777215
	3309	+|(% style="width:461px" %)METD|0~~16777215
	3310	+|(% style="width:461px" %)INRO|0~~16777215
	3311	+|(% style="width:461px" %)TIMESYN|0~~16777215
	3312	+|(% style="width:461px" %)TIMEZ|0~~16777215
	3313	+|(% style="width:461px" %)NTP|0~~16777215
	3314	+|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215
	3315	+|(% style="width:461px" %)SENC|0~~16777215
	3316	+
	3317	+**Address Configuration**
	3318	+
	3319	+The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable.
	3320	+
	3321	+(% style="text-align:center" %)
	3322	+[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]
	3323	+
	3324	+(% style="text-align:center" %)
	3325	+[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]
	3326	+
	3327	+Extended tag name
	3328	+
	3329	+Address range for the extended tag.
	3330	+
	3331	+**Communication Settings**
	3332	+
	3333	+Enable HMI Ethernet in [Project Settings];
	3334	+
	3335	+(% style="text-align:center" %)
	3336	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3337	+
	3338	+Set PLC IP in [Device IP] settings;
	3339	+
	3340	+(% style="text-align:center" %)
	3341	+[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]
	3342	+
	3343	+**Cable Wiring**
	3344	+
	3345	+(% style="text-align:center" %)
	3346	+[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	3347	+
	3348	+= **LG XGK FEnet Ethernet** =
	3349	+
	3350	+Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
	3351	+
	3352	+**HMI Settings**
	3353	+
	3354	+(% class="table-bordered" %)
	3355	+|**Items**|**Settings**|**Note**
	3356	+|Protocol|LG XGK FEnet(Ethernet)|
	3357	+|Connection|Ethernet|
	3358	+|Port No.|2004|
	3359	+
	3360	+**Address List**
	3361	+
	3362	+(% class="table-bordered" %)
	3363	+|**Type**|**Register**|**Range**|**Format**|**Note**
	3364	+|(% rowspan="14" %)Word|P|0~~2047|P d|
	3365	+|M|0~~2047|M d|
	3366	+|K|0~~2047|K d|
	3367	+|F|0~~2047|F d|
	3368	+|T|0~~2047|T d|
	3369	+|C|0~~2047|C d|
	3370	+|Z|0~~127|Z d|
	3371	+|S|0~~127|S d|
	3372	+|L|0~~11263|L d|
	3373	+|N|0~~21503|N d|
	3374	+|D|0~~32767|D d|
	3375	+|R|0~~32767|R d|
	3376	+|ZR|0~~65535|ZR d|
	3377	+|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
	3378	+
	3379	+**✎Note:**
	3380	+
	3381	+* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
	3382	+* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
	3383	+* All bit registers are in the form of bits in word, and the range is the same as the word register;
	3384	+
	3385	+**Communication settings in HMI**
	3386	+
	3387	+Enable HMI Ethernet in [Project Settings];
	3388	+
	3389	+(% style="text-align:center" %)
	3390	+[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
	3391	+
	3392	+Set PLC IP in [Device IP] settings;
	3393	+
	3394	+(% style="text-align:center" %)
	3395	+[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
	3396	+
	3397	+**Cable Wiring**
	3398	+
	3399	+[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]