Changes for page 12 PLC Protocol OLD
Last modified by Mora Zhou on 2024/12/05 14:53
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -399,7 +399,6 @@ 399 399 400 400 (% id="cke_bm_147709S" style="display:none" %) (%%)This example introduces the establishment of Ethernet communication between Wecon HMI and LX5V. It is introduced through three parts: PLC software configuration, HMI software configuration, and hardware wiring. 401 401 402 - 403 403 **Software configuration of PLC** 404 404 405 405 **1)PLC programming software** ... ... @@ -471,7 +471,6 @@ 471 471 472 472 = Create communication with **Rockwell PLC** = 473 473 474 - 475 475 == **MicroLogix Protocol** == 476 476 477 477 MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5 ... ... @@ -587,86 +587,160 @@ 587 587 |(% style="width:393px" %)B|(% style="width:350px" %)fff.dd|(% style="width:333px" %)B 000.0 ~~ fff.15 588 588 |(% style="width:393px" %)S|(% style="width:350px" %)dd.dd|(% style="width:333px" %)S 0.0 ~~ 255.15 589 589 |(% style="width:393px" %)N|(% style="width:350px" %)ffff.dd|(% style="width:333px" %)N 000.0 ~~ fff.15 590 -| (% style="width:393px" %)**PLC word address type**|(% style="width:350px" %)**Address format**|(% style="width:333px" %)**Address range**591 -| (% style="width:393px" %)S|(% style="width:350px" %)ddd|(% style="width:333px" %)S0 ~~ 255592 -| (% style="width:393px" %)TS|(% style="width:350px" %)ffff|(% style="width:333px" %)TS0 ~~ FFFF593 -| (% style="width:393px" %)TP|(% style="width:350px" %)ffff|(% style="width:333px" %)TP0 ~~ FFFF594 -| (% style="width:393px" %)CS|(% style="width:350px" %)ffff|(% style="width:333px" %)CS0 ~~ FFFF595 -| (% style="width:393px" %)CP|(% style="width:350px" %)ffff|(% style="width:333px" %)CP0 ~~ FFFF596 -| (% style="width:393px" %)N|(% style="width:350px" %)ffff|(% style="width:333px" %)N0 ~~ FFFF597 -| (% style="width:393px" %)F|(% style="width:350px" %)ffff|(% style="width:333px" %)F0 ~~ FFFF588 +|**PLC word address type**|**Address format**|**Address range** 589 +|S|ddd|S0 ~~ 255 590 +|TS|ffff|TS0 ~~ FFFF 591 +|TP|ffff|TP0 ~~ FFFF 592 +|CS|ffff|CS0 ~~ FFFF 593 +|CP|ffff|CP0 ~~ FFFF 594 +|N|ffff|N0 ~~ FFFF 595 +|F|ffff|F0 ~~ FFFF 598 598 599 -= **Hitachi EHVSeries (Ethernet)** =597 += (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** = 600 600 601 -S upportedseries: HitachiEHV series599 +== **S7-200 Smart Ethernet** == 602 602 603 - **HMISettings**601 +Supported Series: Siemens S7-200 SMART Series Ethernet Module. 604 604 603 +Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]] 604 + 605 +**HMI Setting** 606 + 605 605 (% class="table-bordered" %) 606 606 |**Items**|**Settings**|**Note** 607 -|Protocol| HitachiEHV series|609 +|Protocol|Simens S7-200 Smart Ethernet| 608 608 |Connection|Ethernet| 609 -|Port No.|3004~~3007| 611 +|Port No.|102| 612 +|PLC station No.|2| 610 610 611 611 **Address List** 612 612 613 613 (% class="table-bordered" %) 614 -|**Type**|**Register**|**Range**|**Format**|**Note** 615 -|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD| 616 -|M|0 - 7FFF.f (Hex)|M HHHH.h| 617 -|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)((( 618 -H1H2H3H4 Module main number 617 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 618 +|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 619 +|Q|Q|Q ddddd.o|0.0~~99999.7| 620 +|V|VWbit|VWbit ddddd.o|0.0~~99999.7| 621 +|V|V|V ddddd.o|0.0~~99999.7| 622 +|M|M|M ddddd.o|0.0~~99999.7| 623 +|SM|SM|ddddd.o|0.0~~99999.7| 624 +|S|S|ddddd.o|0.0~~99999.7|Read only 625 +|T|T|ddddd|0~~99999|Timer state, read only 626 +|C|C|ddddd|0~~99999|Counter state, read only 627 +|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999| 628 +|Q|QW|QW ddddd|0~~99999| 629 +|AI|AIW|AIW ddddd|0~~99999| 630 +|AQ|VB|VB ddddd|0~~99999| 631 +|V|VW|VW ddddd|0~~99998|((( 632 +VW0=VB (0~~1) 619 619 620 - H1:Remote number634 +VW2=VB (2~~3) 621 621 622 -H2: Unit number 636 +Address value is a multiple of 2 637 +))) 638 +|V|VD|VD ddddd|0~~99998|((( 639 +VD0=VB (0~~3) 623 623 624 - H3:Slot number641 +VD2=VB (4~~7) 625 625 626 -H4: Word number of Module 643 +Address value is a multiple of 4 644 +))) 645 +|M|MB|MB ddddd|0~~99999| 646 +|M|MW|MW ddddd|0~~99999|((( 647 +MW0=MB(0~~1) 627 627 628 - H Sub number ofModule649 +MW2=MB(2~~3) 629 629 630 -For example:X21.3 651 +Address value is a multiple of 2 652 +))) 653 +|M|MD|MD ddddd|0~~99999|((( 654 +MD0=MB(0~~3) 631 631 632 - Slot number 2656 +MD4=MB(4~~7) 633 633 634 -Word number of module is 1 658 +Address value is a multiple of 4 659 +))) 660 +|T|TW|TW ddddd|0~~99999|Value of timer 661 +|C|CW|CW ddddd|0~~99999|Value of counter 662 +|W|SW|SW ddddd|0~~99999| 635 635 636 - Bitumberof module3664 +**Communication Settings** 637 637 638 -Remote number and unit number are 0 639 -))) 640 -|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h 641 -|R|0 – FF.f (Hex)|R HH.h| 642 -|L|0 - 73FF.f (Hex)|L HHHH.h| 643 -|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH| 644 -|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)((( 645 -H1H2H3H4 Module main number 666 +Enable HMI Ethernet in [Project Settings]; 646 646 647 -H1: Remote number 668 +(% style="text-align:center" %) 669 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 648 648 649 - H2:Unitnumber671 +Set PLC IP in [Device IP] settings; 650 650 651 -H3: Slot number 673 +(% style="text-align:center" %) 674 +[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]] 652 652 653 -H4: Word number of module 676 +* PLC IP Address: PLC IP 677 +* PLC pot No.: 102(fixed) 678 +* Network:TCP_Client_2N(fixed) 654 654 655 -For example:WX21 680 +(% style="text-align:center" %) 681 +[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 656 656 657 -Wo rd number ofmoduleis1683 +* Wait timeout: depend on actual network situation (more than 1500 ms) 658 658 659 - Slot numberis 2685 +**Cable Wiring** 660 660 661 -Remote number and unit number are 0 687 +(% style="text-align:center" %) 688 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 689 + 690 +== **S7-300 Ethernet** == 691 + 692 +Supported Series: Siemens S7-300 series PLC 693 + 694 +**HMI Setting** 695 + 696 +(% class="table-bordered" %) 697 +|**Items**|**Settings**|**Note** 698 +|Protocol|Simens S7-300 Ethernet| 699 +|Connection|Ethernet| 700 +|Port No.|102| 701 +|PLC station No.|2|Need to be same as the PLC setting 702 + 703 +**Address List** 704 + 705 +(% class="table-bordered" %) 706 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 707 +|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 708 +|Q|Q|Q ddddd.o|0.0~~99999.7| 709 +|M|M|M ddddd.o|0.0~~99999.7| 710 +|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|((( 711 +nn: block number; 712 + 713 +dddd: address; 662 662 ))) 663 -|WY|0 – FFFF (Hex)|WY H1H2H3H4 664 -|WR|0 – FFFF (Hex)|WR HHHH| 665 -|WL|0 - 73FF (Hex)|WL HHHH| 666 -|TC|0 - 2559|TC DDDD| 715 +|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999| 716 +|Q|QW|QW ddddd|0~~99999| 717 +|(% rowspan="3" %)M|MB|MB ddddd|0~~99999| 718 +|MW|MW ddddd|0~~99999|((( 719 +MW0=MB(0~~1) 667 667 668 - **Communication settings in HMI**721 +MW2=MB(2~~3) 669 669 723 +Address value is a multiple of 2 724 +))) 725 +|MD|MD ddddd|0~~99999|((( 726 +MD0=MB(0~~3) 727 + 728 +MD4=MB(4~~7) 729 + 730 +Address value is a multiple of 4 731 +))) 732 +|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)((( 733 +nn: block number; 734 + 735 +dddd: address 736 +))) 737 +|DBxDBW|DBxDBW nndddd|0~~99999999 738 +|DBxDBD|DBxDBD nndddd|0~~99999999 739 + 740 +**Communication Settings** 741 + 670 670 Enable HMI Ethernet in [Project Settings]; 671 671 672 672 (% style="text-align:center" %) ... ... @@ -675,178 +675,405 @@ 675 675 Set PLC IP in [Device IP] settings; 676 676 677 677 (% style="text-align:center" %) 678 -[[image:12.PLC Protocol_html_ d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]750 +[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]] 679 679 680 -**PLC Configuration** 752 +* PLC IP Address: PLC IP 753 +* PLC pot No.: 102(fixed) 754 +* Network:TCP_Client_2N(fixed) 681 681 682 -Connect with PLC, select[Online mode]; 683 - 684 684 (% style="text-align:center" %) 685 -[[image:12.PLC Protocol_html_ 8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]]757 +[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 686 686 687 - SetIPaddress,itisthesameLANparameterswithHMI;759 +* Wait timeout: depend on actual network situation (more than 1500 ms) 688 688 761 +**Cable Wiring** 762 + 689 689 (% style="text-align:center" %) 690 -[[image:12.PLC Protocol_html_ 1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]]764 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 691 691 692 - 3)SavePLC communication parameter, and restartPLC766 +== **S7-1200 Ethernet** == 693 693 694 - **PLC MonitorMode**768 +Supported Series: Siemens S7-1200 695 695 696 - Connectwith PLC and chooseo “online” mode770 +**HMI Setting** 697 697 772 +(% class="table-bordered" %) 773 +|**Items**|**Settings**|**Note** 774 +|Protocol|Siemens S7-1200| 775 +|Connection|Ethernet| 776 +|Port No.|102| 777 +|PLC station No.|2| 778 + 779 +**Address List** 780 + 781 +(% class="table-bordered" %) 782 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 783 +|(% rowspan="4" %)Bit|I|I|M d.o|((( 784 +d:0~-~-9999 785 + 786 +o:0-7 787 +)))| 788 +|Q|Q|Q d.o|((( 789 +d:0~-~-9999 790 + 791 +o:0-7 792 +)))| 793 +|M|M|M d.o|((( 794 +d:0~-~-9999 795 + 796 +o:0-7 797 +)))| 798 +|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 799 +nn:0-9999, 800 + 801 +dddd:0-9999, 802 + 803 +o:0-7 804 +)))|((( 805 +nn:DB No. 806 + 807 +dddd:address value 808 + 809 +o: digit address 810 +))) 811 +|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 812 +|M|MW|MW d|d:0-99999|((( 813 +MW0=MB(0~~1) 814 + 815 +MW2=MB(2~~3) 816 + 817 +Address value is a multiple of 2 818 +))) 819 +|M|MD|MD d|d:0-99999|((( 820 +MD0=MB(0~~3) 821 + 822 +MD4=MB(4~~7) 823 + 824 +Address value is a multiple of 4 825 +))) 826 +|I|IW|IW d|d:0-99999| 827 +|Q|QW|QW d|d:0-99999| 828 +|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 829 +nn:0-9999 830 + 831 +dddd:0-9999 832 +)))|((( 833 +nn:DB No. 834 + 835 +dddd:address value 836 +))) 837 +|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 838 +nn:0-9999 839 + 840 +dddd:0-9999 841 +)))|((( 842 +nn:DB No. 843 + 844 +dddd:address value 845 + 846 +Address value is a multiple of 2 847 +))) 848 +|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 849 +nn:0-9999 850 + 851 +dddd:0-9999 852 +)))|((( 853 +nn:DB No. 854 + 855 +dddd:address value 856 + 857 +Address value is a multiple of 4 858 +))) 859 + 860 +**Communication Settings** 861 + 862 +Enable HMI Ethernet in [Project Settings]; 863 + 698 698 (% style="text-align:center" %) 699 -[[image:12.PLC Protocol_html_ cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]]865 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 700 700 701 - OpenI/Omonitorsheet1867 +Set PLC IP in [Device IP] settings; 702 702 703 703 (% style="text-align:center" %) 704 -[[image:12.PLC Protocol_html_ 68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]]870 +[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 705 705 706 - During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected872 +**✎Note:** 707 707 874 +* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 875 +* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 876 + 877 +**PLC Settings** 878 + 879 +Add BD 880 + 881 +* Please uncheck [Symbolic access only] option; 882 + 708 708 (% style="text-align:center" %) 709 -[[image:12.PLC Protocol_html_ 774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]]884 +[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]] 710 710 711 - Enter the register address,clickOKtoview the valueof the register.886 +Address settings, using BD2 as example. 712 712 888 +* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1. 889 +* 2 represent DB block number 890 +* xxxx represent address 891 + 892 +**Such as:** 893 + 894 +* DBxDBB20000 = DB2.DBB0 895 +* DBxDBW20004 = DB2.DBW4 896 + 713 713 (% style="text-align:center" %) 714 -[[image:12.PLC Protocol_html_ bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]898 +[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]] 715 715 900 +**How to connect with S7-1200 Firmware V4.0** 901 + 902 +PLC configuration 903 + 904 +* Double click [device configuration] in Siemens via software 905 +* Double click [protection] to enter protection configuration screen 906 + 716 716 (% style="text-align:center" %) 717 -[[image:12.PLC Protocol_html_d3 b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]]908 +[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]] 718 718 719 -* *✎Note:**910 +* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)] 720 720 721 - *Both word registersand bit registers support evenontinuous read/writefunctions;722 - * The range ofregisters is based onhespecificPLCtype;912 +(% style="text-align:center" %) 913 +[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]] 723 723 915 +DB settings 916 + 917 +* Right click [DB], select [properties] 918 +* Uncheck [optimized block access] 919 + 724 724 **Cable Wiring** 725 725 726 726 (% style="text-align:center" %) 727 727 [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 728 728 729 -= ** IEC60870-5104 Client** =925 +== **LOGO Ethernet** == 730 730 731 - **HMISetting**927 +Supported Series: Siemens Logo 0BA0 series 732 732 929 +**HMI Settings** 930 + 733 733 (% class="table-bordered" %) 734 -|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note** 735 -|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %) 736 -|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %) 737 -|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %) 932 +|**Items**|**Settings**|**Note** 933 +|Protocol|Siemens LOGO| 934 +|Connection|Ethernet| 935 +|Port No.|102| 936 +|PLC station No.|2| 738 738 739 739 **Address List** 740 740 741 741 (% class="table-bordered" %) 742 -|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range** 743 -|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7 744 -|(% style="width:461px" %)SCNA|0~~16777215.7 745 -|(% style="width:461px" %)DPTB|0~~16777215.7 746 -|(% style="width:461px" %)DCNA|0~~16777215.7 747 -|(% style="width:461px" %)METF|0~~16777215.7 748 -|(% style="width:461px" %)SENC|0~~16777215.7 749 -|(% style="width:461px" %)SENA|0~~16777215.7 750 -|(% style="width:461px" %)MENA|0~~16777215.7 751 -|(% style="width:461px" %)METD|0~~16777215.7 752 -|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215 753 -|(% style="width:461px" %)SCNA|0~~16777215 754 -|(% style="width:461px" %)DPTB|0~~16777215 755 -|(% style="width:461px" %)DCNA|0~~16777215 756 -|(% style="width:461px" %)SENA|0~~16777215 757 -|(% style="width:461px" %)MENA|0~~16777215 758 -|(% style="width:461px" %)METD|0~~16777215 759 -|(% style="width:461px" %)INRO|0~~16777215 760 -|(% style="width:461px" %)TIMESYN|0~~16777215 761 -|(% style="width:461px" %)TIMEZ|0~~16777215 762 -|(% style="width:461px" %)NTP|0~~16777215 763 -|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215 764 -|(% style="width:461px" %)SENC|0~~16777215 941 +|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address** 942 +|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0 943 +|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000 944 +|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000 945 +|4|VW|Word|0-1468|DB1.DBX0.0|0x000000 946 +|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0 947 +|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770 948 +|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0 949 +|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180 950 +|9|AI|Word|1-16|DB1.DBX1032.0|0x002040 951 +|10|I|Bit|1-64|DB1.DBX1024.0|0x002000 952 +|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140 953 +|12|M|Bit|1-112|DB1.DBX1104.0|0x002280 954 +|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0 955 +|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70 956 +|15|V|Bit|0-14697|DB1.DBX0.0|0x000000 765 765 766 -** AddressConfiguration**958 +**PLC Settings in LOGO Software:** 767 767 768 - The address registers of the IEC60870-5-104 protocolare SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocolneedso be added withanxtensiontag "ASDU", which could only be added inthe[Address IdentificationLibrary],other placesare noteditable, that is,the read address in the object or script is not editable.960 +Click [Tools]~-~-[Ethernet Connections],shown as below. 769 769 770 770 (% style="text-align:center" %) 771 -[[image:12.PLC Protocol_html_ ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]]963 +[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]] 772 772 965 +Set Ethernet connection parameter. IP, Subnet Mask, shown as below. 966 + 773 773 (% style="text-align:center" %) 774 -[[image:12.PLC Protocol_html_ 23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]]968 +[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]] 775 775 776 - Extendedtagname970 +**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below. 777 777 778 -Address range for the extended tag. 972 +(% style="text-align:center" %) 973 +[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]] 779 779 780 -** CommunicationSettings**975 +**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download. 781 781 782 -Enable HMI Ethernet in [Project Settings]; 977 +(% style="text-align:center" %) 978 +[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]] 783 783 980 + 784 784 (% style="text-align:center" %) 785 -[[image:12.PLC Protocol_html_ 43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]982 +[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]] 786 786 984 + 985 +**HMI Communication Settings** 986 + 787 787 Set PLC IP in [Device IP] settings; 788 788 789 789 (% style="text-align:center" %) 790 -[[image: 12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]]990 +[[image:SiemensLOGODeviceIP.png]] 791 791 992 +Enable HMI Ethernet in [Project Settings]; 993 + 994 +(% style="text-align:center" %) 995 +[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]] 996 + 997 +TSAP setting 998 + 999 +* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register. 1000 +* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC. 1001 +* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC. 1002 + 1003 +**✎Note:** 1004 + 1005 +* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192. 1006 + 1007 +(% style="text-align:center" %) 1008 +[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]] 1009 + 1010 + 1011 +* AI word address and Ibit address are read-only and cannot be written on HMI. 1012 +* VW address should be even number.such as VW0, VW2, VW4... 1013 +* VD address it takes two VW addresses.such as VD0,VD4,VD8... 1014 +* Written value of RTC cannot exceed 255. 1015 + 792 792 **Cable Wiring** 793 793 794 794 (% style="text-align:center" %) 795 795 [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 796 796 797 -= ** LGXGKFEnetEthernet** =1021 +== **S7-XXX Ethernet** == 798 798 799 -Supported Series: LSXGT seriesXGKCPU with XGL-EFMTEthernet module1023 +Supported Series: Siemens S7-400, S7-1200 and S7-1500 800 800 801 -**HMI Setting s**1025 +**HMI Setting** 802 802 803 -(% class="table-bordered" %) 804 -|**Items**|**Settings**|**Note** 805 -|Protocol|LG XGK FEnet(Ethernet)| 806 -|Connection|Ethernet| 807 -|Port No.|2004| 1027 +(% class="table-bordered" style="width:823px" %) 1028 +|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note** 1029 +|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %) 1030 +|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %) 1031 +|Port No.|(% style="width:437px" %)102|(% style="width:201px" %) 1032 +|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %) 1033 +|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %) 808 808 1035 +Slot from TIA Portal is equal to Device No. of PIStudio 1036 + 1037 +Rack from TIA Portal is equal to HMI No. of PIStudio 1038 + 1039 +(% style="text-align:center" %) 1040 +[[image:S7-XXXCommunication Settings.png]] 1041 + 1042 +(% style="text-align:center" %) 1043 +[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]] 1044 + 809 809 **Address List** 810 810 811 811 (% class="table-bordered" %) 812 -|**Type**|**Register**|**Range**|**Format**|**Note** 813 -|(% rowspan="14" %)Word|P|0~~2047|P d| 814 -|M|0~~2047|M d| 815 -|K|0~~2047|K d| 816 -|F|0~~2047|F d| 817 -|T|0~~2047|T d| 818 -|C|0~~2047|C d| 819 -|Z|0~~127|Z d| 820 -|S|0~~127|S d| 821 -|L|0~~11263|L d| 822 -|N|0~~21503|N d| 823 -|D|0~~32767|D d| 824 -|R|0~~32767|R d| 825 -|ZR|0~~65535|ZR d| 826 -|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31 1048 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 1049 +|(% rowspan="4" %)Bit|I|I|M d.o|((( 1050 +d:0~-~-9999 827 827 828 -**✎Note:** 1052 +o:0-7 1053 +)))| 1054 +|Q|Q|Q d.o|((( 1055 +d:0~-~-9999 829 829 830 -* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC; 831 -* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC; 832 -* All bit registers are in the form of bits in word, and the range is the same as the word register; 1057 +o:0-7 1058 +)))| 1059 +|M|M|M d.o|((( 1060 +d:0~-~-9999 833 833 834 -**Communication settings in HMI** 1062 +o:0-7 1063 +)))| 1064 +|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 1065 +nn:0-9999, 835 835 1067 +dddd:0-9999, 1068 + 1069 +o:0-7 1070 +)))|((( 1071 +nn:DB No. 1072 + 1073 +dddd:address value 1074 + 1075 +o: digit address 1076 +))) 1077 +|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 1078 +|M|MW|MW d|d:0-99999|((( 1079 +MW0=MB(0~~1) 1080 + 1081 +MW2=MB(2~~3) 1082 + 1083 +Address value is a multiple of 2 1084 +))) 1085 +|M|MD|MD d|d:0-99999|((( 1086 +MD0=MB(0~~3) 1087 + 1088 +MD4=MB(4~~7) 1089 + 1090 +Address value is a multiple of 4 1091 +))) 1092 +|I|IW|IW d|d:0-99999| 1093 +|Q|QW|QW d|d:0-99999| 1094 +|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 1095 +nn:0-9999 1096 + 1097 +dddd:0-9999 1098 +)))|((( 1099 +nn:DB No. 1100 + 1101 +dddd:address value 1102 +))) 1103 +|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 1104 +nn:0-9999 1105 + 1106 +dddd:0-9999 1107 +)))|((( 1108 +nn:DB No. 1109 + 1110 +dddd:address value 1111 + 1112 +Address value is a multiple of 2 1113 +))) 1114 +|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 1115 +nn:0-9999 1116 + 1117 +dddd:0-9999 1118 +)))|((( 1119 +nn:DB No. 1120 + 1121 +dddd:address value 1122 + 1123 +Address value is a multiple of 4 1124 +))) 1125 + 1126 +**Communication Settings** 1127 + 836 836 Enable HMI Ethernet in [Project Settings]; 837 837 838 838 (% style="text-align:center" %) 839 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 1131 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]] 840 840 841 841 Set PLC IP in [Device IP] settings; 842 842 843 843 (% style="text-align:center" %) 844 -[[image:12.PLC Protocol_html_ a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]1136 +[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 845 845 1138 +**✎Note:** 1139 + 1140 +* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 1141 +* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 1142 + 846 846 **Cable Wiring** 847 847 848 - = **Mitsubishi**=1145 +{{id name="OLE_LINK8"/}} 849 849 1147 += Create communication with **Mitsubishi** = 1148 + 850 850 == **FX1S, 1N, 2N Series** == 851 851 852 852 Supported Series: Mitsubishi FX1S, FX1N, FX2N series ... ... @@ -2848,3 +2848,254 @@ 2848 2848 * The protocol uploads the information acquired by the USB scanner to the HMI; 2849 2849 * The acquired information is displayed in string mode, so it is necessary to use [characters input/display] object; 2850 2850 * Recommended model: DELI 14880 barcode scanner; 3150 + 3151 += **Hitachi EHV Series (Ethernet)** = 3152 + 3153 +Supported series: Hitachi EHV series 3154 + 3155 +**HMI Settings** 3156 + 3157 +(% class="table-bordered" %) 3158 +|**Items**|**Settings**|**Note** 3159 +|Protocol|Hitachi EHV series| 3160 +|Connection|Ethernet| 3161 +|Port No.|3004~~3007| 3162 + 3163 +**Address List** 3164 + 3165 +(% class="table-bordered" %) 3166 +|**Type**|**Register**|**Range**|**Format**|**Note** 3167 +|(% rowspan="6" %)Bit|T|0 - 2545|T DDDD| 3168 +|M|0 - 7FFF.f (Hex)|M HHHH.h| 3169 +|X|0 – FFFF.f (Hex)|X H1H2H3H4.h|(% rowspan="2" %)((( 3170 +H1H2H3H4 Module main number 3171 + 3172 +H1: Remote number 3173 + 3174 +H2: Unit number 3175 + 3176 +H3: Slot number 3177 + 3178 +H4: Word number of Module 3179 + 3180 +H Sub number of Module 3181 + 3182 +For example:X21.3 3183 + 3184 +Slot number 2 3185 + 3186 +Word number of module is 1 3187 + 3188 +Bit number of module is 3 3189 + 3190 +Remote number and unit number are 0 3191 +))) 3192 +|Y|0 – FFFF.f (Hex)|Y H1H2H3H4.h 3193 +|R|0 – FF.f (Hex)|R HH.h| 3194 +|L|0 - 73FF.f (Hex)|L HHHH.h| 3195 +|(% rowspan="6" %)Word|WM|0 - 7FFF (Hex)|WM HHHH| 3196 +|WX|0 – FFFF (Hex)|WX H1H2H3H4|(% rowspan="2" %)((( 3197 +H1H2H3H4 Module main number 3198 + 3199 +H1: Remote number 3200 + 3201 +H2: Unit number 3202 + 3203 +H3: Slot number 3204 + 3205 +H4: Word number of module 3206 + 3207 +For example:WX21 3208 + 3209 +Word number of module is 1 3210 + 3211 +Slot number is 2 3212 + 3213 +Remote number and unit number are 0 3214 +))) 3215 +|WY|0 – FFFF (Hex)|WY H1H2H3H4 3216 +|WR|0 – FFFF (Hex)|WR HHHH| 3217 +|WL|0 - 73FF (Hex)|WL HHHH| 3218 +|TC|0 - 2559|TC DDDD| 3219 + 3220 +**Communication settings in HMI** 3221 + 3222 +Enable HMI Ethernet in [Project Settings]; 3223 + 3224 +(% style="text-align:center" %) 3225 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 3226 + 3227 +Set PLC IP in [Device IP] settings; 3228 + 3229 +(% style="text-align:center" %) 3230 +[[image:12.PLC Protocol_html_d825387f5bde6cdd.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 3231 + 3232 +**PLC Configuration** 3233 + 3234 +Connect with PLC, select[Online mode]; 3235 + 3236 +(% style="text-align:center" %) 3237 +[[image:12.PLC Protocol_html_8430dda44e5c199c.png||data-xwiki-image-style-alignment="center" height="420" width="600" class="img-thumbnail"]] 3238 + 3239 +Set IP address, it is the same LAN parameters with HMI; 3240 + 3241 +(% style="text-align:center" %) 3242 +[[image:12.PLC Protocol_html_1d8a634f64e25fc3.png||data-xwiki-image-style-alignment="center" height="252" width="347" class="img-thumbnail"]] 3243 + 3244 +3) Save PLC communication parameter, and restart PLC 3245 + 3246 +**PLC Monitor Mode** 3247 + 3248 +Connect with PLC and choose to “online” mode 3249 + 3250 +(% style="text-align:center" %) 3251 +[[image:12.PLC Protocol_html_cdac598e770e3b67.png||data-xwiki-image-style-alignment="center" height="193" width="553" class="img-thumbnail"]] 3252 + 3253 +Open I/O monitor sheet1 3254 + 3255 +(% style="text-align:center" %) 3256 +[[image:12.PLC Protocol_html_68eb3518e5f80892.png||data-xwiki-image-style-alignment="center" height="369" width="559" class="img-thumbnail"]] 3257 + 3258 +During monitoring bit address,1 pts should be selected; during monitoring word address, 16 pts should be selected 3259 + 3260 +(% style="text-align:center" %) 3261 +[[image:12.PLC Protocol_html_774652d8daf548d4.png||data-xwiki-image-style-alignment="center" height="118" width="102" class="img-thumbnail"]] 3262 + 3263 +Enter the register address, click OK to view the value of the register. 3264 + 3265 +(% style="text-align:center" %) 3266 +[[image:12.PLC Protocol_html_bba169c300c92051.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]] 3267 + 3268 +(% style="text-align:center" %) 3269 +[[image:12.PLC Protocol_html_d3b23bb9e81921a3.png||data-xwiki-image-style-alignment="center" height="404" width="600" class="img-thumbnail"]] 3270 + 3271 +**✎Note:** 3272 + 3273 +* Both word registers and bit registers support even continuous read/write functions; 3274 +* The range of registers is based on the specific PLC type; 3275 + 3276 +**Cable Wiring** 3277 + 3278 +(% style="text-align:center" %) 3279 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 3280 + 3281 += **IEC60870-5 104 Client** = 3282 + 3283 +**HMI Setting** 3284 + 3285 +(% class="table-bordered" %) 3286 +|**Items**|(% style="width:725px" %)**Settings**|(% style="width:309px" %)**Note** 3287 +|Protocol|(% style="width:725px" %)IEC60870-5 104 Client|(% style="width:309px" %) 3288 +|Connection|(% style="width:725px" %)Ethernet|(% style="width:309px" %) 3289 +|Port No.|(% style="width:725px" %)2404|(% style="width:309px" %) 3290 + 3291 +**Address List** 3292 + 3293 +(% class="table-bordered" %) 3294 +|(% style="width:460px" %)**Type**|(% style="width:461px" %)**Register**|**Range** 3295 +|(% rowspan="9" style="width:460px" %)Bit|(% style="width:461px" %)SPTB|0~~16777215.7 3296 +|(% style="width:461px" %)SCNA|0~~16777215.7 3297 +|(% style="width:461px" %)DPTB|0~~16777215.7 3298 +|(% style="width:461px" %)DCNA|0~~16777215.7 3299 +|(% style="width:461px" %)METF|0~~16777215.7 3300 +|(% style="width:461px" %)SENC|0~~16777215.7 3301 +|(% style="width:461px" %)SENA|0~~16777215.7 3302 +|(% style="width:461px" %)MENA|0~~16777215.7 3303 +|(% style="width:461px" %)METD|0~~16777215.7 3304 +|(% rowspan="11" style="width:460px" %)Word|(% style="width:461px" %)SPTB|0~~16777215 3305 +|(% style="width:461px" %)SCNA|0~~16777215 3306 +|(% style="width:461px" %)DPTB|0~~16777215 3307 +|(% style="width:461px" %)DCNA|0~~16777215 3308 +|(% style="width:461px" %)SENA|0~~16777215 3309 +|(% style="width:461px" %)MENA|0~~16777215 3310 +|(% style="width:461px" %)METD|0~~16777215 3311 +|(% style="width:461px" %)INRO|0~~16777215 3312 +|(% style="width:461px" %)TIMESYN|0~~16777215 3313 +|(% style="width:461px" %)TIMEZ|0~~16777215 3314 +|(% style="width:461px" %)NTP|0~~16777215 3315 +|(% rowspan="2" style="width:460px" %)Double word|(% style="width:461px" %)METF|0~~16777215 3316 +|(% style="width:461px" %)SENC|0~~16777215 3317 + 3318 +**Address Configuration** 3319 + 3320 +The address registers of the IEC60870-5-104 protocol are SPTB, SCNA, DPTB, DCNA, METF, and SENC. The protocol needs to be added with an extension tag "ASDU", which could only be added in the [Address Identification Library], other places are not editable, that is, the read address in the object or script is not editable. 3321 + 3322 +(% style="text-align:center" %) 3323 +[[image:12.PLC Protocol_html_ba78d143bf457ead.png||data-xwiki-image-style-alignment="center" height="369" width="600" class="img-thumbnail"]] 3324 + 3325 +(% style="text-align:center" %) 3326 +[[image:12.PLC Protocol_html_23533fd5bb81f4ab.png||data-xwiki-image-style-alignment="center" height="389" width="600" class="img-thumbnail"]] 3327 + 3328 +Extended tag name 3329 + 3330 +Address range for the extended tag. 3331 + 3332 +**Communication Settings** 3333 + 3334 +Enable HMI Ethernet in [Project Settings]; 3335 + 3336 +(% style="text-align:center" %) 3337 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 3338 + 3339 +Set PLC IP in [Device IP] settings; 3340 + 3341 +(% style="text-align:center" %) 3342 +[[image:12.PLC Protocol_html_f848736ec68b125.png||data-xwiki-image-style-alignment="center" height="191" width="554" class="img-thumbnail"]] 3343 + 3344 +**Cable Wiring** 3345 + 3346 +(% style="text-align:center" %) 3347 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 3348 + 3349 += **LG XGK FEnet Ethernet** = 3350 + 3351 +Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module 3352 + 3353 +**HMI Settings** 3354 + 3355 +(% class="table-bordered" %) 3356 +|**Items**|**Settings**|**Note** 3357 +|Protocol|LG XGK FEnet(Ethernet)| 3358 +|Connection|Ethernet| 3359 +|Port No.|2004| 3360 + 3361 +**Address List** 3362 + 3363 +(% class="table-bordered" %) 3364 +|**Type**|**Register**|**Range**|**Format**|**Note** 3365 +|(% rowspan="14" %)Word|P|0~~2047|P d| 3366 +|M|0~~2047|M d| 3367 +|K|0~~2047|K d| 3368 +|F|0~~2047|F d| 3369 +|T|0~~2047|T d| 3370 +|C|0~~2047|C d| 3371 +|Z|0~~127|Z d| 3372 +|S|0~~127|S d| 3373 +|L|0~~11263|L d| 3374 +|N|0~~21503|N d| 3375 +|D|0~~32767|D d| 3376 +|R|0~~32767|R d| 3377 +|ZR|0~~65535|ZR d| 3378 +|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31 3379 + 3380 +**✎Note:** 3381 + 3382 +* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC; 3383 +* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC; 3384 +* All bit registers are in the form of bits in word, and the range is the same as the word register; 3385 + 3386 +**Communication settings in HMI** 3387 + 3388 +Enable HMI Ethernet in [Project Settings]; 3389 + 3390 +(% style="text-align:center" %) 3391 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 3392 + 3393 +Set PLC IP in [Device IP] settings; 3394 + 3395 +(% style="text-align:center" %) 3396 +[[image:12.PLC Protocol_html_a2a19b5003ad4090.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]] 3397 + 3398 +**Cable Wiring** 3399 + 3400 +[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]