Skip to Content

Changes for page 12 PLC Protocol OLD

Last modified by Mora Zhou on 2024/12/05 14:53
From version 85.1
edited by Ben
on 2022/08/29 14:36
Change comment: There is no comment for this version
To version 82.1
edited by Ben
on 2022/08/29 14:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -594,559 +594,6 @@
594 594  |N|ffff|N0 ~~ FFFF
595 595  |F|ffff|F0 ~~ FFFF
596 596  
597 -= (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** =
598 -
599 -== **S7-200 Smart Ethernet** ==
600 -
601 -Supported Series: Siemens S7-200 SMART Series Ethernet Module.
602 -
603 -Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
604 -
605 -**HMI Setting**
606 -
607 -(% class="table-bordered" %)
608 -|**Items**|**Settings**|**Note**
609 -|Protocol|Simens S7-200 Smart Ethernet|
610 -|Connection|Ethernet|
611 -|Port No.|102|
612 -|PLC station No.|2|
613 -
614 -**Address List**
615 -
616 -(% class="table-bordered" %)
617 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
618 -|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
619 -|Q|Q|Q ddddd.o|0.0~~99999.7|
620 -|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
621 -|V|V|V ddddd.o|0.0~~99999.7|
622 -|M|M|M ddddd.o|0.0~~99999.7|
623 -|SM|SM|ddddd.o|0.0~~99999.7|
624 -|S|S|ddddd.o|0.0~~99999.7|Read only
625 -|T|T|ddddd|0~~99999|Timer state, read only
626 -|C|C|ddddd|0~~99999|Counter state, read only
627 -|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
628 -|Q|QW|QW ddddd|0~~99999|
629 -|AI|AIW|AIW ddddd|0~~99999|
630 -|AQ|VB|VB ddddd|0~~99999|
631 -|V|VW|VW ddddd|0~~99998|(((
632 -VW0=VB (0~~1)
633 -
634 -VW2=VB (2~~3)
635 -
636 -Address value is a multiple of 2
637 -)))
638 -|V|VD|VD ddddd|0~~99998|(((
639 -VD0=VB (0~~3)
640 -
641 -VD2=VB (4~~7)
642 -
643 -Address value is a multiple of 4
644 -)))
645 -|M|MB|MB ddddd|0~~99999|
646 -|M|MW|MW ddddd|0~~99999|(((
647 -MW0=MB(0~~1)
648 -
649 -MW2=MB(2~~3)
650 -
651 -Address value is a multiple of 2
652 -)))
653 -|M|MD|MD ddddd|0~~99999|(((
654 -MD0=MB(0~~3)
655 -
656 -MD4=MB(4~~7)
657 -
658 -Address value is a multiple of 4
659 -)))
660 -|T|TW|TW ddddd|0~~99999|Value of timer
661 -|C|CW|CW ddddd|0~~99999|Value of counter
662 -|W|SW|SW ddddd|0~~99999|
663 -
664 -**Communication Settings**
665 -
666 -Enable HMI Ethernet in [Project Settings];
667 -
668 -(% style="text-align:center" %)
669 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
670 -
671 -Set PLC IP in [Device IP] settings;
672 -
673 -(% style="text-align:center" %)
674 -[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
675 -
676 -* PLC IP Address: PLC IP
677 -* PLC pot No.: 102(fixed)
678 -* Network:TCP_Client_2N(fixed)
679 -
680 -(% style="text-align:center" %)
681 -[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
682 -
683 -* Wait timeout: depend on actual network situation (more than 1500 ms)
684 -
685 -**Cable Wiring**
686 -
687 -(% style="text-align:center" %)
688 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
689 -
690 -== **S7-300 Ethernet** ==
691 -
692 -Supported Series: Siemens S7-300 series PLC
693 -
694 -**HMI Setting**
695 -
696 -(% class="table-bordered" %)
697 -|**Items**|**Settings**|**Note**
698 -|Protocol|Simens S7-300 Ethernet|
699 -|Connection|Ethernet|
700 -|Port No.|102|
701 -|PLC station No.|2|Need to be same as the PLC setting
702 -
703 -**Address List**
704 -
705 -(% class="table-bordered" %)
706 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
707 -|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
708 -|Q|Q|Q ddddd.o|0.0~~99999.7|
709 -|M|M|M ddddd.o|0.0~~99999.7|
710 -|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
711 -nn: block number;
712 -
713 -dddd: address;
714 -)))
715 -|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
716 -|Q|QW|QW ddddd|0~~99999|
717 -|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
718 -|MW|MW ddddd|0~~99999|(((
719 -MW0=MB(0~~1)
720 -
721 -MW2=MB(2~~3)
722 -
723 -Address value is a multiple of 2
724 -)))
725 -|MD|MD ddddd|0~~99999|(((
726 -MD0=MB(0~~3)
727 -
728 -MD4=MB(4~~7)
729 -
730 -Address value is a multiple of 4
731 -)))
732 -|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
733 -nn: block number;
734 -
735 -dddd: address
736 -)))
737 -|DBxDBW|DBxDBW nndddd|0~~99999999
738 -|DBxDBD|DBxDBD nndddd|0~~99999999
739 -
740 -**Communication Settings**
741 -
742 -Enable HMI Ethernet in [Project Settings];
743 -
744 -(% style="text-align:center" %)
745 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
746 -
747 -Set PLC IP in [Device IP] settings;
748 -
749 -(% style="text-align:center" %)
750 -[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
751 -
752 -* PLC IP Address: PLC IP
753 -* PLC pot No.: 102(fixed)
754 -* Network:TCP_Client_2N(fixed)
755 -
756 -(% style="text-align:center" %)
757 -[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
758 -
759 -* Wait timeout: depend on actual network situation (more than 1500 ms)
760 -
761 -**Cable Wiring**
762 -
763 -(% style="text-align:center" %)
764 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
765 -
766 -== **S7-1200 Ethernet** ==
767 -
768 -Supported Series: Siemens S7-1200
769 -
770 -**HMI Setting**
771 -
772 -(% class="table-bordered" %)
773 -|**Items**|**Settings**|**Note**
774 -|Protocol|Siemens S7-1200|
775 -|Connection|Ethernet|
776 -|Port No.|102|
777 -|PLC station No.|2|
778 -
779 -**Address List**
780 -
781 -(% class="table-bordered" %)
782 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
783 -|(% rowspan="4" %)Bit|I|I|M d.o|(((
784 -d:0~-~-9999
785 -
786 -o:0-7
787 -)))|
788 -|Q|Q|Q d.o|(((
789 -d:0~-~-9999
790 -
791 -o:0-7
792 -)))|
793 -|M|M|M d.o|(((
794 -d:0~-~-9999
795 -
796 -o:0-7
797 -)))|
798 -|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
799 -nn:0-9999,
800 -
801 -dddd:0-9999,
802 -
803 -o:0-7
804 -)))|(((
805 -nn:DB No.
806 -
807 -dddd:address value
808 -
809 -o: digit address
810 -)))
811 -|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
812 -|M|MW|MW d|d:0-99999|(((
813 -MW0=MB(0~~1)
814 -
815 -MW2=MB(2~~3)
816 -
817 -Address value is a multiple of 2
818 -)))
819 -|M|MD|MD d|d:0-99999|(((
820 -MD0=MB(0~~3)
821 -
822 -MD4=MB(4~~7)
823 -
824 -Address value is a multiple of 4
825 -)))
826 -|I|IW|IW d|d:0-99999|
827 -|Q|QW|QW d|d:0-99999|
828 -|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
829 -nn:0-9999
830 -
831 -dddd:0-9999
832 -)))|(((
833 -nn:DB No.
834 -
835 -dddd:address value
836 -)))
837 -|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
838 -nn:0-9999
839 -
840 -dddd:0-9999
841 -)))|(((
842 -nn:DB No.
843 -
844 -dddd:address value
845 -
846 -Address value is a multiple of 2
847 -)))
848 -|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
849 -nn:0-9999
850 -
851 -dddd:0-9999
852 -)))|(((
853 -nn:DB No.
854 -
855 -dddd:address value
856 -
857 -Address value is a multiple of 4
858 -)))
859 -
860 -**Communication Settings**
861 -
862 -Enable HMI Ethernet in [Project Settings];
863 -
864 -(% style="text-align:center" %)
865 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
866 -
867 -Set PLC IP in [Device IP] settings;
868 -
869 -(% style="text-align:center" %)
870 -[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
871 -
872 -**✎Note:**
873 -
874 -* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
875 -* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
876 -
877 -**PLC Settings**
878 -
879 -Add BD
880 -
881 -* Please uncheck [Symbolic access only] option;
882 -
883 -(% style="text-align:center" %)
884 -[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
885 -
886 -Address settings, using BD2 as example.
887 -
888 -* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
889 -* 2 represent DB block number
890 -* xxxx represent address
891 -
892 -**Such as:**
893 -
894 -* DBxDBB20000 = DB2.DBB0
895 -* DBxDBW20004 = DB2.DBW4
896 -
897 -(% style="text-align:center" %)
898 -[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
899 -
900 -**How to connect with S7-1200 Firmware V4.0**
901 -
902 -PLC configuration
903 -
904 -* Double click [device configuration] in Siemens via software
905 -* Double click [protection] to enter protection configuration screen
906 -
907 -(% style="text-align:center" %)
908 -[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
909 -
910 -* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
911 -
912 -(% style="text-align:center" %)
913 -[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
914 -
915 -DB settings
916 -
917 -* Right click [DB], select [properties]
918 -* Uncheck [optimized block access]
919 -
920 -**Cable Wiring**
921 -
922 -(% style="text-align:center" %)
923 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
924 -
925 -== ==
926 -
927 -(% style="text-align:center" %)
928 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
929 -
930 -== **S7-XXX Ethernet** ==
931 -
932 -Supported Series: Siemens S7-400, S7-1200 and S7-1500
933 -
934 -**HMI Setting**
935 -
936 -(% class="table-bordered" style="width:823px" %)
937 -|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
938 -|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
939 -|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
940 -|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
941 -|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
942 -|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
943 -
944 -Slot from TIA Portal is equal to Device No. of PIStudio
945 -
946 -Rack from TIA Portal is equal to HMI No. of PIStudio
947 -
948 -(% style="text-align:center" %)
949 -[[image:S7-XXXCommunication Settings.png]]
950 -
951 -(% style="text-align:center" %)
952 -[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
953 -
954 -**Address List**
955 -
956 -(% class="table-bordered" %)
957 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
958 -|(% rowspan="4" %)Bit|I|I|M d.o|(((
959 -d:0~-~-9999
960 -
961 -o:0-7
962 -)))|
963 -|Q|Q|Q d.o|(((
964 -d:0~-~-9999
965 -
966 -o:0-7
967 -)))|
968 -|M|M|M d.o|(((
969 -d:0~-~-9999
970 -
971 -o:0-7
972 -)))|
973 -|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
974 -nn:0-9999,
975 -
976 -dddd:0-9999,
977 -
978 -o:0-7
979 -)))|(((
980 -nn:DB No.
981 -
982 -dddd:address value
983 -
984 -o: digit address
985 -)))
986 -|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
987 -|M|MW|MW d|d:0-99999|(((
988 -MW0=MB(0~~1)
989 -
990 -MW2=MB(2~~3)
991 -
992 -Address value is a multiple of 2
993 -)))
994 -|M|MD|MD d|d:0-99999|(((
995 -MD0=MB(0~~3)
996 -
997 -MD4=MB(4~~7)
998 -
999 -Address value is a multiple of 4
1000 -)))
1001 -|I|IW|IW d|d:0-99999|
1002 -|Q|QW|QW d|d:0-99999|
1003 -|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
1004 -nn:0-9999
1005 -
1006 -dddd:0-9999
1007 -)))|(((
1008 -nn:DB No.
1009 -
1010 -dddd:address value
1011 -)))
1012 -|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
1013 -nn:0-9999
1014 -
1015 -dddd:0-9999
1016 -)))|(((
1017 -nn:DB No.
1018 -
1019 -dddd:address value
1020 -
1021 -Address value is a multiple of 2
1022 -)))
1023 -|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
1024 -nn:0-9999
1025 -
1026 -dddd:0-9999
1027 -)))|(((
1028 -nn:DB No.
1029 -
1030 -dddd:address value
1031 -
1032 -Address value is a multiple of 4
1033 -)))
1034 -
1035 -**Communication Settings**
1036 -
1037 -Enable HMI Ethernet in [Project Settings];
1038 -
1039 -(% style="text-align:center" %)
1040 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
1041 -
1042 -Set PLC IP in [Device IP] settings;
1043 -
1044 -(% style="text-align:center" %)
1045 -[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
1046 -
1047 -**✎Note:**
1048 -
1049 -* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
1050 -* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
1051 -
1052 -**Cable Wiring**
1053 -
1054 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1055 -
1056 -== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet** ==
1057 -
1058 -Supported Series: Siemens Logo 0BA0 series
1059 -
1060 -**HMI Settings**
1061 -
1062 -(% class="table-bordered" %)
1063 -|**Items**|**Settings**|**Note**
1064 -|Protocol|Siemens LOGO|
1065 -|Connection|Ethernet|
1066 -|Port No.|102|
1067 -|PLC station No.|2|
1068 -
1069 -**Address List**
1070 -
1071 -(% class="table-bordered" %)
1072 -|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
1073 -|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
1074 -|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
1075 -|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
1076 -|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
1077 -|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
1078 -|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
1079 -|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
1080 -|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
1081 -|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
1082 -|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
1083 -|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
1084 -|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
1085 -|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
1086 -|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
1087 -|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
1088 -
1089 -**PLC Settings in LOGO Software:**
1090 -
1091 -Click [Tools]~-~-[Ethernet Connections],shown as below.
1092 -
1093 -(% style="text-align:center" %)
1094 -[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
1095 -
1096 -Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
1097 -
1098 -(% style="text-align:center" %)
1099 -[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
1100 -
1101 -**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
1102 -
1103 -(% style="text-align:center" %)
1104 -[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
1105 -
1106 -**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
1107 -
1108 -(% style="text-align:center" %)
1109 -[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
1110 -
1111 -
1112 -(% style="text-align:center" %)
1113 -[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
1114 -
1115 -
1116 -**HMI Communication Settings**
1117 -
1118 -Set PLC IP in [Device IP] settings;
1119 -
1120 -(% style="text-align:center" %)
1121 -[[image:SiemensLOGODeviceIP.png]]
1122 -
1123 -Enable HMI Ethernet in [Project Settings];
1124 -
1125 -(% style="text-align:center" %)
1126 -[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
1127 -
1128 -TSAP setting
1129 -
1130 -* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
1131 -* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
1132 -* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
1133 -
1134 -**✎Note:**
1135 -
1136 -* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
1137 -
1138 -(% style="text-align:center" %)
1139 -[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
1140 -
1141 -
1142 -* AI word address and Ibit address are read-only and cannot be written on HMI.
1143 -* VW address should be even number.such as VW0, VW2, VW4...
1144 -* VD address it takes two VW addresses.such as VD0,VD4,VD8...
1145 -* Written value of RTC cannot exceed 255.
1146 -
1147 -**Cable Wiring**
1148 -
1149 -
1150 1150  = Create communication with **Mitsubishi** =
1151 1151  
1152 1152  == **FX1S, 1N, 2N Series** ==