Changes for page 12 PLC Protocol OLD

Last modified by Mora Zhou on 2024/12/05 14:53

From 86.1 to 87.1 From 123.1 to 124.1

From version 87.1

edited by Ben
on 2022/08/29 14:37

Change comment: There is no comment for this version

To version 123.1

edited by Ben
on 2022/08/30 14:22

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 16 added, 0 removed)

Details

Page properties

Content

@@ -511,7 +511,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_58205bdf82c06d4.png||data-xwiki-image-style-alignment="center" height="307" width="500" class="img-thumbnail"]]
--== **FreeTag Ethernet/IP (CompactLogix)** ==
++== **CompactLogix FreeTag Ethernet protocol** ==
  Allen-Brandly CompactLogix
@@ -568,7 +568,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="400" class="img-thumbnail"]]
--== **AB PLC address edit** ==
++== **MicroLogix 1200** ** protocol** ==
  The operational address is determined by the connection of Allen-Bradley PLC to HMI. For extension modules or other special conditions, refer to allen-Bradley PLC instruction manual. The following is an example of allen-bradley MicroLogix1200.
@@ -594,9 +594,9 @@
  |N|ffff|N0 ~~ FFFF
  |F|ffff|F0 ~~ FFFF
--= (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** =
++= Create communication with (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens PLC** =
--== **S7-200 Smart Ethernet** ==
++== **S7-200 Smart Ethernet Protocol** ==
  Supported Series: Siemens S7-200 SMART Series Ethernet Module.
@@ -687,7 +687,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **S7-300 Ethernet** ==
++== **S7-300 Ethernet Protocol** ==
  Supported Series: Siemens S7-300 series PLC
@@ -763,7 +763,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **S7-1200 Ethernet** ==
++== **S7-1200 Ethernet Protocol** ==
  Supported Series: Siemens S7-1200
@@ -922,7 +922,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **S7-XXX Ethernet** ==
++== **S7-XXX Ethernet Protocol** ==
  Supported Series: Siemens S7-400, S7-1200 and S7-1500
@@ -1048,7 +1048,7 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet** ==
++== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet Protocol** ==
  Supported Series: Siemens Logo 0BA0 series
@@ -1143,9 +1143,9 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--= Create communication with **Mitsubishi** =
++= Create communication with **Mitsubishi PLC** =
--== **FX1S, 1N, 2N Series** ==
++== **FX1S, 1N, 2N Series Protocol** ==
  Supported Series: Mitsubishi FX1S, FX1N, FX2N series
@@ -1198,7 +1198,7 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
--== **FX5U Ethernet** ==
++== **FX5U Ethernet Protocol** ==
  Mitsubishi FX5U series PLC
@@ -1277,7 +1277,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **FX5U Serial Port** ==
++== **FX5U Serial Port Protocol** ==
  Mitsubishi FX5U series PLC
@@ -1369,7 +1369,7 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
--== **L02 MELSEC (Ethernet)** ==
++== **L02 MELSEC (Ethernet) Protocol** ==
  Mitsubishi Q series CPU built-in Ethernet port.
@@ -1454,7 +1454,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **QJ71E71 MELSEC** ==
++== **QJ71E71 MELSEC Protocol** ==
  Mitsubishi QJ71E71 Ethernet communication module;
@@ -1534,219 +1534,200 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--= **MODBUS** =
++= Create communication with **Delta PLC** =
--== **MODBUS RTU Master** ==
++== **DVP serial protocol** ==
--Supported Series: MODBUS RTU CONTROLLER
++(% class="wikigeneratedid" %)
++Supported Series: Delta DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX Controller
--HMI works as MODBUS SLAVE connecting with MASTER
++**1）HMI Settings**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
++|**Item**|**Settings**|**Note**
++|Protocol|DELTA DVP Series|
++|Connection|RS485|
++|Baud rate|9600|
++|Data bit|7|
++|Parity|Even|
++|Stop bit|1|
++|PLC station No.|1~~255|Need to be the same as PLC settings
++**2）Address List**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X d|0~~303237|
++|Bit|Y|Y|Y d|0~~303237|
++|Bit|M|M|M d|0~~99999|
++|Bit|T|T|T d|0~~99999|
++|Bit|C|C|T d|0~~99999|
++|Bit|S|S|T d|0~~99999|
++|Word|D|D|D d|0~~99999|
++|Word|T|T|T d|0~~99999|
++|Word|C|C|C d|0~~99999|
++(% class="wikigeneratedid" %)
++**3）Configure the communication protocol**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
++(% class="wikigeneratedid" %)
++[[image:image-20220829152327-6.png]]
--**HMI Settings**
++(% class="wikigeneratedid" %)
++[[image:image-20220829152016-3.png]]
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|MODBUS RTU Master|
--|Connection|RS485/RS232|
--|Baud rate|2400~~187500|
--|Data bit|8|
--|Parity|Even/ Odd/ None|
--|Stop bit|1/2|
--|Station No.|0~~255|
++(% class="wikigeneratedid" %)
++**4）Cable Wiring**
--**Address List**
++(% class="wikigeneratedid" id="H" %)
++[[image:image-20220829152610-7.png]]
--(% class="table-bordered" %)
--|**Type**|**HMI address**|**MODBUS code**|**Range**
--|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
--|Word|HDW3500~~HDW7999|4|0~~4499
++(% class="wikigeneratedid" id="H" %)
++[[image:image-20220829152102-5.png]]
--**Cable Wiring**
--* **RS485**
++== **DVP Ethernet Protocol** ==
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
++(% class="wikigeneratedid" %)
++Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
++**1）HMI Settings**
--* **RS232**
++|**Items**|**Settings**|**Note**
++|Protocol|DELTA DVP Modbus TCP|
++|Connection|Ethernet|
++|Port No.|201|Must be the same as the PLC setting
++|PLC station No.|0|Must be the same as the PLC setting
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
++**2）Address List**
--**✎Note:** COM3 only available in PI8000/PI9000 series.
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X o|0~~377|
++|Bit|Y|Y|Y o|0~~377|
++|Bit|M0|M0|M0 d|0~~1535|
++|Bit|M1|M1|M1 d|1536~~4095|
++|Bit|T|T|T d|0~~255|
++|Bit|C|C|C d|0~~255|
++|Bit|S|S|S d|0~~1023|
++|Word|D0|D0|D0 d|0~~4095|
++|Word|D1|D1|D1 d|4096~~11999|(((
++
++)))
++|Word|T|T|T d|0~~255|
++|Word|C|C|C d|0~~199|(((
++
++)))
--== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
++(% class="wikigeneratedid" %)
++**3）Configure the communication protocol**
--Supported Series: MODBUS RTU CONTROLLER
++[[image:image-20220829155452-1.png]]
--HMI works as MODBUS MASTER connecting with SLAVE.
++[[image:image-20220829162116-2.png]]
--The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
++**4）Cable Wiring**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++== **AS serial protocol** ==
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
++**1）HMI Settings**
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
--
--**HMI Settings**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
--|Connection|RS485/RS232|
--|Baud rate|2400~~187500|
++|**Item**|**Settings**|**Note**
++|Protocol|DELTA AS300 MODBUS RTU|
++|Connection|RS485|
++|Baud rate|9600|
  |Data bit|8|
--|Parity|Even/ Odd/ None|
--|Stop bit|1/2|
--|PLC station No.|0~~255|
++|Parity|NONE|
++|Stop bit|1|
++|PLC station No.|1|
--**Address List**
++**2）Address List**
--(% class="table-bordered" %)
--|**Type**|**Address Type**|**Function code & Description**
--|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
--|10 (write values to multiple addresses )
--|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits, ie write continuously)
--|(% rowspan="3" %)1|02 (Read the input state)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits)
--|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits)
--|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
--|0F (Write multiple bits)
--**✎Note:**
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X d|0~~63|
++|Bit|Y|Y|Y d|0~~63|
++|Bit|D|D|D d|0~~29999|
++|Bit|M|M|M d|0~~8191|
++|Bit|SM|SM|SM d|0~~4095|
++|Bit|S|S|S h|0~~2047|
++|Bit|T|T|T d|0~~511|
++|Bit|C|C|C d|0~~511|
++|Bit|HC|HC|HC d|0~~255|
++|Word|X|X|X h|0~~63|
++|Word|Y|Y|Y d|0~~63|
++|Word|SR|SR|SR d|0~~2047|
++|Word|D|D|D d|0~~29999|
++|Word|T|T|T d|0~~511|
++|Word|C|C|C h|0~~511|
++|Word|E|E|E d|0~~9|
--* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
--* The function codes sent out are the same as those that read and write words.
++**3）Configure the communication protocol**
--**Station number for more than one slaves**
++[[image:image-20220830094600-1.png]]
--If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
++[[image:image-20220830094657-2.png]]
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
++**4）Cable Wiring**
--**Cable Wiring**
++Figure
--* **RS485**
++[[image:image-20220830141138-1.png]]
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
++Pin Definition Diagram
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
++[[image:image-20220830095131-1.png]]
--* **RS232**
++== **AS Ethernet Protocol** ==
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
++**1）HMI Settings**
--**✎Note:** COM3 only available in PI8000/PI9000 series.
--== **MODBUS TCP Slave (All function)** ==
--
--Supported series: MODBUS TCP controller
--
--HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
--
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
--
--**HMI Setting**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|MODBUS TCP Slave (All function)|
++|=**Items**|=**Settings**|=**Note**
++|Protocol|DELTA AS300 MODBUS TCP|
  |Connection|Ethernet|
  |Port No.|502|
--|PLC station No.|1|
++|Device No.|1|
++|HMI No.|0|
--**Address List**
++**2）Address List**
--(% class="table-bordered" %)
--|**Type**|**Register**|**Function code & Description**
--|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
--|06 (write single register: write a binary value to a holding register)
--|10 (write values to multiple addresses )
--|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
--|10 (write values to multiple addresses )
--|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits, ie write continuously)
--|(% rowspan="3" %)1|02 (Read the input state)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits)
--|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
--|05 (Force a single coil to force the on/off state of a logic coil)
--|0F (Write multiple bits)
--|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
--|0F (Write multiple bits)
--**Communication Settings**
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X d|0~~63|
++|Bit|Y|Y|Y d|0~~63|
++|Bit|D|D|D d|0~~29999|
++|Bit|M|M|M d|0~~8191|
++|Bit|SM|SM|SM d|0~~4095|
++|Bit|S|S|S h|0~~2047|
++|Bit|T|T|T d|0~~511|
++|Bit|C|C|C d|0~~511|
++|Bit|HC|HC|HC d|0~~255|
++|Word|X|X|X h|0~~63|
++|Word|Y|Y|Y d|0~~63|
++|Word|SR|SR|SR d|0~~2047|
++|Word|D|D|D d|0~~29999|
++|Word|T|T|T d|0~~511|
++|Word|C|C|C h|0~~511|
++|Word|E|E|E d|0~~9|
--Enable HMI Ethernet in [Project Settings];
++**3）Configure the communication protocol**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
++[[image:image-20220830140537-1.png]]
--Set PLC IP in [Device IP] settings;
++[[image:image-20220830140629-2.png]]
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
++**4）Cable Wiring**
--**Cable Wiring**
++Figure
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++[[image:image-20220830094929-1.png]]
--= **Omron** =
++Pin Definition Diagram
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++
++= ** Omron** =
++
  == **EC55** ==
  Supported device: EC55 temperature instrument
@@ -1753,7 +1753,6 @@
  **HMI Settings**
--(% class="table-bordered" %)
  |**Items**|**Settings**|**Note**
  |Protocol|Omron EC55|
  |Connection|RS485 (9600, 2, 7, EVEN)|
@@ -1762,7 +1762,6 @@
  **Address List**
--(% class="table-bordered" %)
  |**Type**|**Register**|**Device range**|**HMI range**|**Function**
  |(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
  |C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
@@ -1808,7 +1808,7 @@
  * Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
  * When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
  * Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
--* (% id="cke_bm_8690S" style="display:none" %)[[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]](%%)Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
++* [[image:12.PLC Protocol_html_d428cad280fdefb3.png||height="276" width="347"]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
  == EtherNet/IP NX series ==
@@ -1816,7 +1816,6 @@
  **HMI Setting**
--(% class="table-bordered" %)
  |**Items**|**Settings**|**Note**
  |Protocol|Omron NX Ethernet/IP|
  |Connection|Ethernet|
@@ -1868,183 +1868,224 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_437cb087b36b5784.png||data-xwiki-image-style-alignment="center" height="330" width="600" class="img-thumbnail"]]
--
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_60ef71528a99abf5.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
  **Cable Wiring**
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++
++= **MODBUS** =
++
++== **MODBUS RTU Master** ==
++
++Supported Series: MODBUS RTU CONTROLLER
++
++HMI works as MODBUS SLAVE connecting with MASTER
++
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_44425b313b0a6b96.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
--= **OpenCAN** =
--OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_b56b9da32c3caaa.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
--This protocol is only available in PI8000 series HMI.
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_67cd25458b9c72a6.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
++
  **HMI Settings**
  (% class="table-bordered" %)
  |**Items**|**Settings**|**Note**
--|Protocol|OPENCAN|
--|Connection|CAN port|
--|Baud rate|250000|
++|Protocol|MODBUS RTU Master|
++|Connection|RS485/RS232|
++|Baud rate|2400~~187500|
++|Data bit|8|
++|Parity|Even/ Odd/ None|
++|Stop bit|1/2|
++|Station No.|0~~255|
--**CAN frame setting in HMI**
++**Address List**
--Click [OpenCAN setting] button in communication setting window;
++(% class="table-bordered" %)
++|**Type**|**HMI address**|**MODBUS code**|**Range**
++|Bit|HDX3000.0~~HDX3499.15|0|0~~7999
++|Word|HDW3500~~HDW7999|4|0~~4499
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
++**Cable Wiring**
--Click [Add] to create a new frame;
++* **RS485**
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
--(% class="table-bordered" %)
--|**No**|**Items**|**Description**
--|1|Add|add a frame related to register address
--|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
--|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
--|4|Modify|Modify the frames in frame management
--|5|Copy|Copy one frame to another
--|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
--|7|Empty|All frames in the list are cleared
--|8|Browse|Displays configuration files in XML format in IE
--|9|OK|Complete the configuration of the frame and exit
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
--Set CANBUS frame in setting windows
++* **RS232**
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
--(% class="table-bordered" %)
--|**No**|(% style="width:185px" %)**Items**|(% style="width:854px" %)**Description**
--|1|(% style="width:185px" %)ID|(% style="width:854px" %)Set the ID of a can frame in hexadecimal format;
--|2|(% style="width:185px" %)ID assign|(% style="width:854px" %)split the ID by PF, PS, and SA;
--|3|(% style="width:185px" %)Frame type|(% style="width:854px" %)Select Standard frame or Extended Frame;
--|4|(% style="width:185px" %)Frame format|(% style="width:854px" %)Select between data frame and remote Frame;
--|5|(% style="width:185px" %)Data|(% style="width:854px" %)Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
--|6|(% style="width:185px" %)Use address|(% style="width:854px" %)(((
--Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
++**✎Note:** COM3 only available in PI8000/PI9000 series.
--**Edit:** Set a bit or word address by its format;
++== **MODBUS RTU Slave (All function)/(All function OneBaseAddress)** ==
--**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
--)))
--|(% rowspan="8" %)7|(% rowspan="8" style="width:185px" %)Data interactive configuration|(% style="width:854px" %)There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
--|(% style="width:854px" %)Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
--|(% style="width:854px" %)Feedback mode: feedback mode includes no response, confirm response and data response;
--|(% style="width:854px" %)No response: the device or touch screen will not receive feedback;
--|(% style="width:854px" %)Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
--|(% style="width:854px" %)Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
--|(% style="width:854px" %)response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
--|(% style="width:854px" %)Response timeout: sets whether the response frame timeout;
--|(% rowspan="3" %)8|(% rowspan="3" style="width:185px" %)Control address|(% style="width:854px" %)If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
--|(% style="width:854px" %)Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
--|(% style="width:854px" %)Manually send: a manually send tick indicates only one send;
--|9|(% style="width:185px" %)Flag configuration|(% style="width:854px" %)Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
--|10|(% style="width:185px" %)Note|(% style="width:854px" %)Fill the text to explain the meaning of the frame;
--|11|(% style="width:185px" %)Data assign|(% style="width:854px" %)Preview the display in this table based on the address and the corresponding number of digits;
--|12|(% style="width:185px" %)Current operation display|(% style="width:854px" %)Display the description of current operation;
--|13|(% style="width:185px" %)Add|(% style="width:854px" %)Add a new frame;
--|14|(% style="width:185px" %)Save frame|(% style="width:854px" %)Save the configured frame format;
--|15|(% style="width:185px" %)Cancel|(% style="width:854px" %)Cancel the frame configuration;
++Supported Series: MODBUS RTU CONTROLLER
--Set CAN address (Read or write operation);
++HMI works as MODBUS MASTER connecting with SLAVE.
++The addresses in [All function] start from 0, while the addresses in [All function OneBaseAddress] start from 1 (offset 1).
++
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_7236139c887defad.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
--(% class="table-bordered" %)
--|**No.**|(% style="width:207px" %)**Item**|(% style="width:829px" %)**Description**
--|1|(% style="width:207px" %)Current address|(% style="width:829px" %)Displays the register type and register address set by the user in the data access interface
--|(% rowspan="3" %)2|(% rowspan="3" style="width:207px" %)Trigger|(% style="width:829px" %)Two operations, "read" and "write," are based on on-screen registers
--|(% style="width:829px" %)If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
--|(% style="width:829px" %)If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
--|(% rowspan="5" %)3|(% rowspan="3" style="width:207px" %)Data operation|(% style="width:829px" %)The read and write operations in the trigger conditions are set accordingly.
--|(% style="width:829px" %)If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
--|(% style="width:829px" %)If the trigger condition is a writing operation, there are two situations:(((
--* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
--* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
--)))
--|(% rowspan="2" style="width:207px" %)Position and length input format|(% style="width:829px" %)If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
--|(% style="width:829px" %)If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
--|4|(% style="width:207px" %)Add|(% style="width:829px" %)Add current configuration
--|5|(% style="width:207px" %)Close|(% style="width:829px" %)Close the configuration window to exit
--**Multiple Packages Settings**
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_de80207f2b495c17.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
++
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_4e9e8eff81c7ff8b.png||data-xwiki-image-style-alignment="center" height="462" width="600" class="img-thumbnail"]]
--Check [Multiple packages supported] to open [Multiple package data] window, as below show.
++**HMI Settings**
--Select Multiple package type
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|MODBUS RTU Slave (All function)/( All function OneBaseAddress)|
++|Connection|RS485/RS232|
++|Baud rate|2400~~187500|
++|Data bit|8|
++|Parity|Even/ Odd/ None|
++|Stop bit|1/2|
++|PLC station No.|0~~255|
--* Not Multiple packages
--* J1939 Multiple packages
--* Customized Multiple packages
++**Address List**
--Click [Edit Receive data] for [Receive] settings
++(% class="table-bordered" %)
++|**Type**|**Address Type**|**Function code & Description**
++|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
++|10 (write values to multiple addresses )
++|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits, ie write continuously)
++|(% rowspan="3" %)1|02 (Read the input state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
++|0F (Write multiple bits)
--* Start code+ Total length (J1939)
++**✎Note:**
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++* Modbus can also support getting bit from the word, which could access the address such as 100.1 and other formats.
++* The function codes sent out are the same as those that read and write words.
--As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
++**Station number for more than one slaves**
--* Start code + Data max length (J1939)
++If there are more than one slaves connected to HMI, please set slave station number during editing address, as below shows.
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_31f028c6d80be344.png||data-xwiki-image-style-alignment="center" height="515" width="485" class="img-thumbnail"]]
--As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
++**Cable Wiring**
--* Data max length (J1939)
++* **RS485**
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_68dfb6d383f0edd9.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
--As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_cbeb90cb4faaa8bc.png||data-xwiki-image-style-alignment="center" height="244" width="394" class="img-thumbnail"]]
--* Customized multiple package
++* **RS232**
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_9030ba679545793b.png||data-xwiki-image-style-alignment="center" height="241" width="387" class="img-thumbnail"]]
--As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
++**✎Note:** COM3 only available in PI8000/PI9000 series.
--Click [Edit Send data] for [Send] setting
++== **MODBUS TCP Slave (All function)** ==
--* J1939
++Supported series: MODBUS TCP controller
++HMI works as MODBUS TCP MASTER connecting with TCP SLAVE
++
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_8877cb7f39c2b607.png||data-xwiki-image-style-alignment="center" height="571" width="544" class="img-thumbnail"]]
--[Data] is all data to be sent.
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_e7e1f06f127a9175.png||data-xwiki-image-style-alignment="center" height="426" width="553" class="img-thumbnail"]]
--Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
--* Customized multiple package
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_60bbfe5de79417a6.png||data-xwiki-image-style-alignment="center" height="163" width="553" class="img-thumbnail"]]
++**HMI Setting**
++
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|MODBUS TCP Slave (All function)|
++|Connection|Ethernet|
++|Port No.|502|
++|PLC station No.|1|
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Type**|**Register**|**Function code & Description**
++|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
++|10 (write values to multiple addresses )
++|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits, ie write continuously)
++|(% rowspan="3" %)1|02 (Read the input state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
++|0F (Write multiple bits)
++
++**Communication Settings**
++
++Enable HMI Ethernet in [Project Settings];
++
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
++[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
--[Data] is all data to be sent.
++Set PLC IP in [Device IP] settings;
--As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_4bd3cc8348adecf8.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
  **Cable Wiring**
  (% style="text-align:center" %)
--[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--**✎Note:** The address interval between each frame need to be more than a word address;
--
  = **SHIMADEN** =
  == **FP23** ==
@@ -2219,559 +2219,6 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
--= **Siemens** =
--
--== **S7-200 Smart Ethernet** ==
--
--Supported Series: Siemens S7-200 SMART Series Ethernet Module.
--
--Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
--
--**HMI Setting**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|Simens S7-200 Smart Ethernet|
--|Connection|Ethernet|
--|Port No.|102|
--|PLC station No.|2|
--
--**Address List**
--
--(% class="table-bordered" %)
--|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
--|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
--|Q|Q|Q ddddd.o|0.0~~99999.7|
--|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
--|V|V|V ddddd.o|0.0~~99999.7|
--|M|M|M ddddd.o|0.0~~99999.7|
--|SM|SM|ddddd.o|0.0~~99999.7|
--|S|S|ddddd.o|0.0~~99999.7|Read only
--|T|T|ddddd|0~~99999|Timer state, read only
--|C|C|ddddd|0~~99999|Counter state, read only
--|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
--|Q|QW|QW ddddd|0~~99999|
--|AI|AIW|AIW ddddd|0~~99999|
--|AQ|VB|VB ddddd|0~~99999|
--|V|VW|VW ddddd|0~~99998|(((
--VW0=VB (0~~1)
--
--VW2=VB (2~~3)
--
--Address value is a multiple of 2
--)))
--|V|VD|VD ddddd|0~~99998|(((
--VD0=VB (0~~3)
--
--VD2=VB (4~~7)
--
--Address value is a multiple of 4
--)))
--|M|MB|MB ddddd|0~~99999|
--|M|MW|MW ddddd|0~~99999|(((
--MW0=MB(0~~1)
--
--MW2=MB(2~~3)
--
--Address value is a multiple of 2
--)))
--|M|MD|MD ddddd|0~~99999|(((
--MD0=MB(0~~3)
--
--MD4=MB(4~~7)
--
--Address value is a multiple of 4
--)))
--|T|TW|TW ddddd|0~~99999|Value of timer
--|C|CW|CW ddddd|0~~99999|Value of counter
--|W|SW|SW ddddd|0~~99999|
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
--
--Set PLC IP in [Device IP] settings;
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
--
--* PLC IP Address: PLC IP
--* PLC pot No.: 102(fixed)
--* Network:TCP_Client_2N(fixed)
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
--
--* Wait timeout: depend on actual network situation (more than 1500 ms)
--
--**Cable Wiring**
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--
--== **S7-300 Ethernet** ==
--
--Supported Series: Siemens S7-300 series PLC
--
--**HMI Setting**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|Simens S7-300 Ethernet|
--|Connection|Ethernet|
--|Port No.|102|
--|PLC station No.|2|Need to be same as the PLC setting
--
--**Address List**
--
--(% class="table-bordered" %)
--|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
--|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
--|Q|Q|Q ddddd.o|0.0~~99999.7|
--|M|M|M ddddd.o|0.0~~99999.7|
--|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
--nn: block number;
--
--dddd: address;
--)))
--|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
--|Q|QW|QW ddddd|0~~99999|
--|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
--|MW|MW ddddd|0~~99999|(((
--MW0=MB(0~~1)
--
--MW2=MB(2~~3)
--
--Address value is a multiple of 2
--)))
--|MD|MD ddddd|0~~99999|(((
--MD0=MB(0~~3)
--
--MD4=MB(4~~7)
--
--Address value is a multiple of 4
--)))
--|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
--nn: block number;
--
--dddd: address
--)))
--|DBxDBW|DBxDBW nndddd|0~~99999999
--|DBxDBD|DBxDBD nndddd|0~~99999999
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
--
--Set PLC IP in [Device IP] settings;
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
--
--* PLC IP Address: PLC IP
--* PLC pot No.: 102(fixed)
--* Network:TCP_Client_2N(fixed)
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
--
--* Wait timeout: depend on actual network situation (more than 1500 ms)
--
--**Cable Wiring**
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--
--== **S7-1200 Ethernet** ==
--
--Supported Series: Siemens S7-1200
--
--**HMI Setting**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|Siemens S7-1200|
--|Connection|Ethernet|
--|Port No.|102|
--|PLC station No.|2|
--
--**Address List**
--
--(% class="table-bordered" %)
--|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
--|(% rowspan="4" %)Bit|I|I|M d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|Q|Q|Q d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|M|M|M d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
--nn:0-9999,
--
--dddd:0-9999,
--
--o:0-7
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--o: digit address
--)))
--|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
--|M|MW|MW d|d:0-99999|(((
--MW0=MB(0~~1)
--
--MW2=MB(2~~3)
--
--Address value is a multiple of 2
--)))
--|M|MD|MD d|d:0-99999|(((
--MD0=MB(0~~3)
--
--MD4=MB(4~~7)
--
--Address value is a multiple of 4
--)))
--|I|IW|IW d|d:0-99999|
--|Q|QW|QW d|d:0-99999|
--|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--)))
--|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--Address value is a multiple of 2
--)))
--|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--Address value is a multiple of 4
--)))
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
--
--Set PLC IP in [Device IP] settings;
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
--
--**✎Note:**
--
--* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
--* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
--
--**PLC Settings**
--
--Add BD
--
--* Please uncheck [Symbolic access only] option;
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
--
--Address settings, using BD2 as example.
--
--* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
--* 2 represent DB block number
--* xxxx represent address
--
--**Such as:**
--
--* DBxDBB20000 = DB2.DBB0
--* DBxDBW20004 = DB2.DBW4
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
--
--**How to connect with S7-1200 Firmware V4.0**
--
--PLC configuration
--
--* Double click [device configuration] in Siemens via software
--* Double click [protection] to enter protection configuration screen
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
--
--* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
--
--DB settings
--
--* Right click [DB], select [properties]
--* Uncheck [optimized block access]
--
--**Cable Wiring**
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--
--== **LOGO Ethernet** ==
--
--Supported Series: Siemens Logo 0BA0 series
--
--**HMI Settings**
--
--(% class="table-bordered" %)
--|**Items**|**Settings**|**Note**
--|Protocol|Siemens LOGO|
--|Connection|Ethernet|
--|Port No.|102|
--|PLC station No.|2|
--
--**Address List**
--
--(% class="table-bordered" %)
--|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
--|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
--|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
--|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
--|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
--|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
--|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
--|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
--|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
--|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
--|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
--|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
--|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
--|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
--|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
--|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
--
--**PLC Settings in LOGO Software:**
--
--Click [Tools]~-~-[Ethernet Connections],shown as below.
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
--
--Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
--
--**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
--
--**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
--
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
--
--
--**HMI Communication Settings**
--
--Set PLC IP in [Device IP] settings;
--
--(% style="text-align:center" %)
--[[image:SiemensLOGODeviceIP.png]]
--
--Enable HMI Ethernet in [Project Settings];
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
--
--TSAP setting
--
--* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
--* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
--* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
--
--**✎Note:**
--
--* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
--
--
--* AI word address and Ibit address are read-only and cannot be written on HMI.
--* VW address should be even number.such as VW0, VW2, VW4...
--* VD address it takes two VW addresses.such as VD0,VD4,VD8...
--* Written value of RTC cannot exceed 255.
--
--**Cable Wiring**
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--
--== **S7-XXX Ethernet** ==
--
--Supported Series: Siemens S7-400, S7-1200 and S7-1500
--
--**HMI Setting**
--
--(% class="table-bordered" style="width:823px" %)
--|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
--|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
--|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
--|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
--|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
--|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
--
--Slot from TIA Portal is equal to Device No. of PIStudio
--
--Rack from TIA Portal is equal to HMI No. of PIStudio
--
--(% style="text-align:center" %)
--[[image:S7-XXXCommunication Settings.png]]
--
--(% style="text-align:center" %)
--[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
--
--**Address List**
--
--(% class="table-bordered" %)
--|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
--|(% rowspan="4" %)Bit|I|I|M d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|Q|Q|Q d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|M|M|M d.o|(((
--d:0~-~-9999
--
--o:0-7
--)))|
--|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
--nn:0-9999,
--
--dddd:0-9999,
--
--o:0-7
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--o: digit address
--)))
--|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
--|M|MW|MW d|d:0-99999|(((
--MW0=MB(0~~1)
--
--MW2=MB(2~~3)
--
--Address value is a multiple of 2
--)))
--|M|MD|MD d|d:0-99999|(((
--MD0=MB(0~~3)
--
--MD4=MB(4~~7)
--
--Address value is a multiple of 4
--)))
--|I|IW|IW d|d:0-99999|
--|Q|QW|QW d|d:0-99999|
--|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--)))
--|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--Address value is a multiple of 2
--)))
--|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
--nn:0-9999
--
--dddd:0-9999
--)))|(((
--nn:DB No.
--
--dddd:address value
--
--Address value is a multiple of 4
--)))
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
--
--Set PLC IP in [Device IP] settings;
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
--
--**✎Note:**
--
--* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
--* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
--
--**Cable Wiring**
--
--{{id name="OLE_LINK8"/}}
--
--(% style="text-align:center" %)
--[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--
  = **User Defined Protocol** =
  If the device does not support MODBUS standard, and the protocol is not list in PIStudio, then user can define the protocol by following instruction to realize simply communication functions like sending and receiving commands.
@@ -3397,3 +3397,168 @@
  **Cable Wiring**
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++
++
++= **OpenCAN** =
++
++OpenCan is based on CAN2.0 standard; OpenCAN protocols that could be configured autonomously to accept and send frames.
++
++This protocol is only available in PI8000 series HMI.
++
++**HMI Settings**
++
++|**Items**|**Settings**|**Note**
++|Protocol|OPENCAN|
++|Connection|CAN port|
++|Baud rate|250000|
++
++**CAN frame setting in HMI**
++
++Click [OpenCAN setting] button in communication setting window;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_e866b9e56e19785d.png||data-xwiki-image-style-alignment="center" height="503" width="600" class="img-thumbnail"]]
++
++Click [Add] to create a new frame;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_3a6f4e2141763c8f.png||data-xwiki-image-style-alignment="center" height="315" width="600" class="img-thumbnail"]]
++
++|**No**|**Items**|**Description**
++|1|Add|add a frame related to register address
++|2|Insert|Select the position where you want to insert a frame, and click [Insert frame] to add a new frame in front of the current frame position
++|3|Frame manager|This list shows some of the main parameters for each frame that the user adds
++|4|Modify|Modify the frames in frame management
++|5|Copy|Copy one frame to another
++|6|Delete|Remove the selected frames from the list by modifying the frames in frame management. If no frames are selected in the list, the first frame is deleted.
++|7|Empty|All frames in the list are cleared
++|8|Browse|Displays configuration files in XML format in IE
++|9|OK|Complete the configuration of the frame and exit
++
++Set CANBUS frame in setting windows
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_7c83130820321ef.png||data-xwiki-image-style-alignment="center" height="507" width="600" class="img-thumbnail"]]
++
++|**No**|**Items**|**Description**
++|1|ID|Set the ID of a can frame in hexadecimal format;
++|2|ID assign|split the ID by PF, PS, and SA;
++|3|Frame type|Select Standard frame or Extended Frame;
++|4|Frame format|Select between data frame and remote Frame;
++|5|Data|Set the data part of CAN frame, with two Numbers representing a hexadecimal number and Spaces spaced; Maximum support of 8 bytes is defined according to CAN message;
++|6|Use address|(((
++Set the register address related to the CAN frame, which corresponds to the register address set on the main state one by one. The data obtained from the address is assigned continuously;
++
++**Edit:** Set a bit or word address by its format;
++
++**Option: **Set address options related to frame, enter “register address option” interface, specifically browse the following “register address option” interface;
++)))
++|(% rowspan="8" %)7|(% rowspan="8" %)Data interactive configuration|There are two interactive modes of the touch screen. One is that the touch screen actively sends frames, and the device receives and processes and feeds back. The other, on the contrary, passively receives frames from the device for processing and feedback;
++|Send after receiving: if this item is selected, the interaction of the touch screen will act as a passive party, and the touch screen will receive the CAN frame first and send feedback. Unchecked items interact in the opposite way;
++|Feedback mode: feedback mode includes no response, confirm response and data response;
++|No response: the device or touch screen will not receive feedback;
++|Confirm response: the device or the touch screen will receive feedback with confirmation, which could be used to compare the data parts. If this function is used, the 20 addresses before and after this address should not be used. All addresses of cata10-cata30 could not be used with the reply confirmation function of cata20;
++|Data response: the device or touch screen will receive feedback with data, and the data to be separated from the feedback frame should be set to store in the register address;
++|response ID: if the address wants to receive data on a frame with a different ID, set this, check "different from sender", and enter a different ID in the following input box. Without this setting, the screen will receive and process a frame with the same ID as the sender;
++|Response timeout: sets whether the response frame timeout;
++|(% rowspan="3" %)8|(% rowspan="3" %)Control address|If ticked, enable sending when the value of the corresponding control bit number (address) is non-0.
++|Control bit: CtrlBit register range 0~~255, if the control bit is ON, can instruction will run normally. Otherwise, it doesn't run;
++|Manually send: a manually send tick indicates only one send;
++|9|Flag configuration|Communication control for each frame. Display OFF when communication is normal, and ON when communication is abnormal;
++|10|Note|Fill the text to explain the meaning of the frame;
++|11|Data assign|Preview the display in this table based on the address and the corresponding number of digits;
++|12|Current operation display|Display the description of current operation;
++|13|Add|Add a new frame;
++|14|Save frame|Save the configured frame format;
++|15|Cancel|Cancel the frame configuration;
++
++Set CAN address (Read or write operation);
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_7e9f9b25eb6ae8ce.png||data-xwiki-image-style-alignment="center" height="446" width="600" class="img-thumbnail"]]
++
++|**No.**|**Item**|**Description**
++|1|Current address|Displays the register type and register address set by the user in the data access interface
++|(% rowspan="3" %)2|(% rowspan="3" %)Trigger|Two operations, "read" and "write," are based on on-screen registers
++|If "read" is selected, the register address is reading device data in a manner of sending frames set by the user in a loop.
++|If "write" is selected, the screen data of the register address will be written into the device. The writing mode is that the user makes a write operation on the screen, which will trigger the sending of a frame set by the user.
++|(% rowspan="5" %)3|(% rowspan="3" %)Data operation|The read and write operations in the trigger conditions are set accordingly.
++|If the trigger condition is a read operation, this section needs to set the position and length of the data to be obtained at the current address in the frame.
++|If the trigger condition is a writing operation, there are two situations:(((
++* If the "add writing data to the frame" option is not selected, the frame set by the user will be sent directly when the user writes on the screen.
++* Select the "add the written data to the frame" option, and when the user writes on the screen, the program will insert the data in the frame set by the user and send the written data to the frame set by the user according to the data insertion position and length set by the user.
++)))
++|(% rowspan="2" %)Position and length input format|If the register type is a bit address, the decimal point is required to represent the bits in the byte. For example, 1.1 represents the first bit of the first byte of 8 bytes in the data frame, and the length is in bits, and so on.
++|If the register type is word address, the integer only needs to represent the byte, such as 1, which represents the first byte of 8-byte data in the data frame, and the unit of length is byte, and so on.
++|4|Add|Add current configuration
++|5|Close|Close the configuration window to exit
++
++**Multiple Packages Settings**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_107e0f6b1a90afff.png||data-xwiki-image-style-alignment="center" height="341" width="600" class="img-thumbnail"]]
++
++Check [Multiple packages supported] to open [Multiple package data] window, as below show.
++
++Select Multiple package type
++
++* Not Multiple packages
++* J1939 Multiple packages
++* Customized Multiple packages
++
++Click [Edit Receive data] for [Receive] settings
++
++* Start code+ Total length (J1939)
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_3c360c6b5aca51bf.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++
++As set above set, J1939 command is received by the HMI, only when its length is 25 bytes, and the start code is 0x57, 0x1B;
++
++* Start code + Data max length (J1939)
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_74496b2a68cfcdde.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++
++As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes, and the start code is 0x57, 0x1B;
++
++* Data max length (J1939)
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_98cea3e7cbd8f05d.png||data-xwiki-image-style-alignment="center" height="340" width="426" class="img-thumbnail"]]
++
++As set above set, J1939 command is received by the HMI, only when its length less than 50 bytes.
++
++* Customized multiple package
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_4635bbe4d7999db0.png||data-xwiki-image-style-alignment="center" height="395" width="367" class="img-thumbnail"]]
++
++As set above, It is received by the HMI, when the first frame starts with 0X57 0X1B, and the sum of the data lengths of multiple frames is equal to 79 bytes.
++
++Click [Edit Send data] for [Send] setting
++
++* J1939
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_a4769e44331ca732.png||data-xwiki-image-style-alignment="center" height="280" width="463" class="img-thumbnail"]]
++
++[Data] is all data to be sent.
++
++Since the frame of the J1939 frame contains the number of the data packet, so the data sent is: the first byte (number) + 7 bytes of data. If it is less than 7 bytes, it is sent in the actual number of bytes.
++
++* Customized multiple package
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_78546f765d6f3deb.png||data-xwiki-image-style-alignment="center" height="280" width="463"]]
++
++[Data] is all data to be sent.
++
++As set above, fist frame length is 2 bytes, and others are sent with 6 bytes for every frame, if the last frame is less than 6 bytes, send according to the actual length.
++
++**Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_fccede84efcbdc22.png||data-xwiki-image-style-alignment="center" height="111" width="391" class="img-thumbnail"]]
++
++**✎Note:** The address interval between each frame need to be more than a word address;

image-20220829151746-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.1 KB

Content

image-20220829151848-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.0 KB

Content

image-20220829152016-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.2 KB

Content

image-20220829152042-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.0 KB

Content

image-20220829152102-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.3 KB

Content

image-20220829152327-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+42.5 KB

Content

image-20220829152610-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.5 KB

Content

image-20220829155452-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.1 KB

Content

image-20220829162116-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+50.4 KB

Content

image-20220830094600-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.4 KB

Content

image-20220830094657-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.4 KB

Content

image-20220830094929-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.4 KB

Content

image-20220830095131-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.7 KB

Content

image-20220830140537-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.2 KB

Content

image-20220830140629-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+48.4 KB

Content

image-20220830141138-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.9 KB

Content

Changes for page 12 PLC Protocol OLD

Summary

Details

Navigation

Table of Contents