Changes for page 12 PLC Protocol OLD
Last modified by Mora Zhou on 2024/12/05 14:53
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -594,558 +594,9 @@ 594 594 |N|ffff|N0 ~~ FFFF 595 595 |F|ffff|F0 ~~ FFFF 596 596 597 -= Create communication with (% id="cke_bm_43878S" style="display:none" %)** **(%%)**Siemens** = 598 - 599 -== **S7-200 Smart Ethernet Protocol** == 600 - 601 -Supported Series: Siemens S7-200 SMART Series Ethernet Module. 602 - 603 -Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]] 604 - 605 -**HMI Setting** 606 - 607 -(% class="table-bordered" %) 608 -|**Items**|**Settings**|**Note** 609 -|Protocol|Simens S7-200 Smart Ethernet| 610 -|Connection|Ethernet| 611 -|Port No.|102| 612 -|PLC station No.|2| 613 - 614 -**Address List** 615 - 616 -(% class="table-bordered" %) 617 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 618 -|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 619 -|Q|Q|Q ddddd.o|0.0~~99999.7| 620 -|V|VWbit|VWbit ddddd.o|0.0~~99999.7| 621 -|V|V|V ddddd.o|0.0~~99999.7| 622 -|M|M|M ddddd.o|0.0~~99999.7| 623 -|SM|SM|ddddd.o|0.0~~99999.7| 624 -|S|S|ddddd.o|0.0~~99999.7|Read only 625 -|T|T|ddddd|0~~99999|Timer state, read only 626 -|C|C|ddddd|0~~99999|Counter state, read only 627 -|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999| 628 -|Q|QW|QW ddddd|0~~99999| 629 -|AI|AIW|AIW ddddd|0~~99999| 630 -|AQ|VB|VB ddddd|0~~99999| 631 -|V|VW|VW ddddd|0~~99998|((( 632 -VW0=VB (0~~1) 633 - 634 -VW2=VB (2~~3) 635 - 636 -Address value is a multiple of 2 637 -))) 638 -|V|VD|VD ddddd|0~~99998|((( 639 -VD0=VB (0~~3) 640 - 641 -VD2=VB (4~~7) 642 - 643 -Address value is a multiple of 4 644 -))) 645 -|M|MB|MB ddddd|0~~99999| 646 -|M|MW|MW ddddd|0~~99999|((( 647 -MW0=MB(0~~1) 648 - 649 -MW2=MB(2~~3) 650 - 651 -Address value is a multiple of 2 652 -))) 653 -|M|MD|MD ddddd|0~~99999|((( 654 -MD0=MB(0~~3) 655 - 656 -MD4=MB(4~~7) 657 - 658 -Address value is a multiple of 4 659 -))) 660 -|T|TW|TW ddddd|0~~99999|Value of timer 661 -|C|CW|CW ddddd|0~~99999|Value of counter 662 -|W|SW|SW ddddd|0~~99999| 663 - 664 -**Communication Settings** 665 - 666 -Enable HMI Ethernet in [Project Settings]; 667 - 668 -(% style="text-align:center" %) 669 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 670 - 671 -Set PLC IP in [Device IP] settings; 672 - 673 -(% style="text-align:center" %) 674 -[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]] 675 - 676 -* PLC IP Address: PLC IP 677 -* PLC pot No.: 102(fixed) 678 -* Network:TCP_Client_2N(fixed) 679 - 680 -(% style="text-align:center" %) 681 -[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 682 - 683 -* Wait timeout: depend on actual network situation (more than 1500 ms) 684 - 685 -**Cable Wiring** 686 - 687 -(% style="text-align:center" %) 688 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 689 - 690 -== **S7-300 Ethernet Protocol** == 691 - 692 -Supported Series: Siemens S7-300 series PLC 693 - 694 -**HMI Setting** 695 - 696 -(% class="table-bordered" %) 697 -|**Items**|**Settings**|**Note** 698 -|Protocol|Simens S7-300 Ethernet| 699 -|Connection|Ethernet| 700 -|Port No.|102| 701 -|PLC station No.|2|Need to be same as the PLC setting 702 - 703 -**Address List** 704 - 705 -(% class="table-bordered" %) 706 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 707 -|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 708 -|Q|Q|Q ddddd.o|0.0~~99999.7| 709 -|M|M|M ddddd.o|0.0~~99999.7| 710 -|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|((( 711 -nn: block number; 712 - 713 -dddd: address; 714 -))) 715 -|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999| 716 -|Q|QW|QW ddddd|0~~99999| 717 -|(% rowspan="3" %)M|MB|MB ddddd|0~~99999| 718 -|MW|MW ddddd|0~~99999|((( 719 -MW0=MB(0~~1) 720 - 721 -MW2=MB(2~~3) 722 - 723 -Address value is a multiple of 2 724 -))) 725 -|MD|MD ddddd|0~~99999|((( 726 -MD0=MB(0~~3) 727 - 728 -MD4=MB(4~~7) 729 - 730 -Address value is a multiple of 4 731 -))) 732 -|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)((( 733 -nn: block number; 734 - 735 -dddd: address 736 -))) 737 -|DBxDBW|DBxDBW nndddd|0~~99999999 738 -|DBxDBD|DBxDBD nndddd|0~~99999999 739 - 740 -**Communication Settings** 741 - 742 -Enable HMI Ethernet in [Project Settings]; 743 - 744 -(% style="text-align:center" %) 745 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 746 - 747 -Set PLC IP in [Device IP] settings; 748 - 749 -(% style="text-align:center" %) 750 -[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]] 751 - 752 -* PLC IP Address: PLC IP 753 -* PLC pot No.: 102(fixed) 754 -* Network:TCP_Client_2N(fixed) 755 - 756 -(% style="text-align:center" %) 757 -[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 758 - 759 -* Wait timeout: depend on actual network situation (more than 1500 ms) 760 - 761 -**Cable Wiring** 762 - 763 -(% style="text-align:center" %) 764 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 765 - 766 -== **S7-1200 Ethernet Protocol** == 767 - 768 -Supported Series: Siemens S7-1200 769 - 770 -**HMI Setting** 771 - 772 -(% class="table-bordered" %) 773 -|**Items**|**Settings**|**Note** 774 -|Protocol|Siemens S7-1200| 775 -|Connection|Ethernet| 776 -|Port No.|102| 777 -|PLC station No.|2| 778 - 779 -**Address List** 780 - 781 -(% class="table-bordered" %) 782 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 783 -|(% rowspan="4" %)Bit|I|I|M d.o|((( 784 -d:0~-~-9999 785 - 786 -o:0-7 787 -)))| 788 -|Q|Q|Q d.o|((( 789 -d:0~-~-9999 790 - 791 -o:0-7 792 -)))| 793 -|M|M|M d.o|((( 794 -d:0~-~-9999 795 - 796 -o:0-7 797 -)))| 798 -|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 799 -nn:0-9999, 800 - 801 -dddd:0-9999, 802 - 803 -o:0-7 804 -)))|((( 805 -nn:DB No. 806 - 807 -dddd:address value 808 - 809 -o: digit address 810 -))) 811 -|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 812 -|M|MW|MW d|d:0-99999|((( 813 -MW0=MB(0~~1) 814 - 815 -MW2=MB(2~~3) 816 - 817 -Address value is a multiple of 2 818 -))) 819 -|M|MD|MD d|d:0-99999|((( 820 -MD0=MB(0~~3) 821 - 822 -MD4=MB(4~~7) 823 - 824 -Address value is a multiple of 4 825 -))) 826 -|I|IW|IW d|d:0-99999| 827 -|Q|QW|QW d|d:0-99999| 828 -|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 829 -nn:0-9999 830 - 831 -dddd:0-9999 832 -)))|((( 833 -nn:DB No. 834 - 835 -dddd:address value 836 -))) 837 -|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 838 -nn:0-9999 839 - 840 -dddd:0-9999 841 -)))|((( 842 -nn:DB No. 843 - 844 -dddd:address value 845 - 846 -Address value is a multiple of 2 847 -))) 848 -|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 849 -nn:0-9999 850 - 851 -dddd:0-9999 852 -)))|((( 853 -nn:DB No. 854 - 855 -dddd:address value 856 - 857 -Address value is a multiple of 4 858 -))) 859 - 860 -**Communication Settings** 861 - 862 -Enable HMI Ethernet in [Project Settings]; 863 - 864 -(% style="text-align:center" %) 865 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 866 - 867 -Set PLC IP in [Device IP] settings; 868 - 869 -(% style="text-align:center" %) 870 -[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 871 - 872 -**✎Note:** 873 - 874 -* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 875 -* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 876 - 877 -**PLC Settings** 878 - 879 -Add BD 880 - 881 -* Please uncheck [Symbolic access only] option; 882 - 883 -(% style="text-align:center" %) 884 -[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]] 885 - 886 -Address settings, using BD2 as example. 887 - 888 -* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1. 889 -* 2 represent DB block number 890 -* xxxx represent address 891 - 892 -**Such as:** 893 - 894 -* DBxDBB20000 = DB2.DBB0 895 -* DBxDBW20004 = DB2.DBW4 896 - 897 -(% style="text-align:center" %) 898 -[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]] 899 - 900 -**How to connect with S7-1200 Firmware V4.0** 901 - 902 -PLC configuration 903 - 904 -* Double click [device configuration] in Siemens via software 905 -* Double click [protection] to enter protection configuration screen 906 - 907 -(% style="text-align:center" %) 908 -[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]] 909 - 910 -* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)] 911 - 912 -(% style="text-align:center" %) 913 -[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]] 914 - 915 -DB settings 916 - 917 -* Right click [DB], select [properties] 918 -* Uncheck [optimized block access] 919 - 920 -**Cable Wiring** 921 - 922 -(% style="text-align:center" %) 923 -[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 924 - 925 -== **S7-XXX Ethernet Protocol** == 926 - 927 -Supported Series: Siemens S7-400, S7-1200 and S7-1500 928 - 929 -**HMI Setting** 930 - 931 -(% class="table-bordered" style="width:823px" %) 932 -|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note** 933 -|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %) 934 -|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %) 935 -|Port No.|(% style="width:437px" %)102|(% style="width:201px" %) 936 -|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %) 937 -|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %) 938 - 939 -Slot from TIA Portal is equal to Device No. of PIStudio 940 - 941 -Rack from TIA Portal is equal to HMI No. of PIStudio 942 - 943 -(% style="text-align:center" %) 944 -[[image:S7-XXXCommunication Settings.png]] 945 - 946 -(% style="text-align:center" %) 947 -[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]] 948 - 949 -**Address List** 950 - 951 -(% class="table-bordered" %) 952 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 953 -|(% rowspan="4" %)Bit|I|I|M d.o|((( 954 -d:0~-~-9999 955 - 956 -o:0-7 957 -)))| 958 -|Q|Q|Q d.o|((( 959 -d:0~-~-9999 960 - 961 -o:0-7 962 -)))| 963 -|M|M|M d.o|((( 964 -d:0~-~-9999 965 - 966 -o:0-7 967 -)))| 968 -|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 969 -nn:0-9999, 970 - 971 -dddd:0-9999, 972 - 973 -o:0-7 974 -)))|((( 975 -nn:DB No. 976 - 977 -dddd:address value 978 - 979 -o: digit address 980 -))) 981 -|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 982 -|M|MW|MW d|d:0-99999|((( 983 -MW0=MB(0~~1) 984 - 985 -MW2=MB(2~~3) 986 - 987 -Address value is a multiple of 2 988 -))) 989 -|M|MD|MD d|d:0-99999|((( 990 -MD0=MB(0~~3) 991 - 992 -MD4=MB(4~~7) 993 - 994 -Address value is a multiple of 4 995 -))) 996 -|I|IW|IW d|d:0-99999| 997 -|Q|QW|QW d|d:0-99999| 998 -|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 999 -nn:0-9999 1000 - 1001 -dddd:0-9999 1002 -)))|((( 1003 -nn:DB No. 1004 - 1005 -dddd:address value 1006 -))) 1007 -|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 1008 -nn:0-9999 1009 - 1010 -dddd:0-9999 1011 -)))|((( 1012 -nn:DB No. 1013 - 1014 -dddd:address value 1015 - 1016 -Address value is a multiple of 2 1017 -))) 1018 -|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 1019 -nn:0-9999 1020 - 1021 -dddd:0-9999 1022 -)))|((( 1023 -nn:DB No. 1024 - 1025 -dddd:address value 1026 - 1027 -Address value is a multiple of 4 1028 -))) 1029 - 1030 -**Communication Settings** 1031 - 1032 -Enable HMI Ethernet in [Project Settings]; 1033 - 1034 -(% style="text-align:center" %) 1035 -[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]] 1036 - 1037 -Set PLC IP in [Device IP] settings; 1038 - 1039 -(% style="text-align:center" %) 1040 -[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 1041 - 1042 -**✎Note:** 1043 - 1044 -* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 1045 -* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 1046 - 1047 -**Cable Wiring** 1048 - 1049 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]] 1050 - 1051 -== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet Protocol** == 1052 - 1053 -Supported Series: Siemens Logo 0BA0 series 1054 - 1055 -**HMI Settings** 1056 - 1057 -(% class="table-bordered" %) 1058 -|**Items**|**Settings**|**Note** 1059 -|Protocol|Siemens LOGO| 1060 -|Connection|Ethernet| 1061 -|Port No.|102| 1062 -|PLC station No.|2| 1063 - 1064 -**Address List** 1065 - 1066 -(% class="table-bordered" %) 1067 -|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address** 1068 -|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0 1069 -|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000 1070 -|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000 1071 -|4|VW|Word|0-1468|DB1.DBX0.0|0x000000 1072 -|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0 1073 -|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770 1074 -|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0 1075 -|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180 1076 -|9|AI|Word|1-16|DB1.DBX1032.0|0x002040 1077 -|10|I|Bit|1-64|DB1.DBX1024.0|0x002000 1078 -|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140 1079 -|12|M|Bit|1-112|DB1.DBX1104.0|0x002280 1080 -|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0 1081 -|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70 1082 -|15|V|Bit|0-14697|DB1.DBX0.0|0x000000 1083 - 1084 -**PLC Settings in LOGO Software:** 1085 - 1086 -Click [Tools]~-~-[Ethernet Connections],shown as below. 1087 - 1088 -(% style="text-align:center" %) 1089 -[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]] 1090 - 1091 -Set Ethernet connection parameter. IP, Subnet Mask, shown as below. 1092 - 1093 -(% style="text-align:center" %) 1094 -[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]] 1095 - 1096 -**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below. 1097 - 1098 -(% style="text-align:center" %) 1099 -[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]] 1100 - 1101 -**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download. 1102 - 1103 -(% style="text-align:center" %) 1104 -[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]] 1105 - 1106 - 1107 -(% style="text-align:center" %) 1108 -[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]] 1109 - 1110 - 1111 -**HMI Communication Settings** 1112 - 1113 -Set PLC IP in [Device IP] settings; 1114 - 1115 -(% style="text-align:center" %) 1116 -[[image:SiemensLOGODeviceIP.png]] 1117 - 1118 -Enable HMI Ethernet in [Project Settings]; 1119 - 1120 -(% style="text-align:center" %) 1121 -[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]] 1122 - 1123 -TSAP setting 1124 - 1125 -* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register. 1126 -* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC. 1127 -* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC. 1128 - 1129 -**✎Note:** 1130 - 1131 -* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192. 1132 - 1133 -(% style="text-align:center" %) 1134 -[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]] 1135 - 1136 - 1137 -* AI word address and Ibit address are read-only and cannot be written on HMI. 1138 -* VW address should be even number.such as VW0, VW2, VW4... 1139 -* VD address it takes two VW addresses.such as VD0,VD4,VD8... 1140 -* Written value of RTC cannot exceed 255. 1141 - 1142 -**Cable Wiring** 1143 - 1144 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]] 1145 - 1146 1146 = Create communication with **Mitsubishi** = 1147 1147 1148 -== **FX1S, 1N, 2N Series Protocol** ==599 +== **FX1S, 1N, 2N Series** == 1149 1149 1150 1150 Supported Series: Mitsubishi FX1S, FX1N, FX2N series 1151 1151 ... ... @@ -1198,7 +1198,7 @@ 1198 1198 1199 1199 **✎Note:** COM3 only available in PI8000/PI9000 series. 1200 1200 1201 -== **FX5U Ethernet Protocol** ==652 +== **FX5U Ethernet** == 1202 1202 1203 1203 Mitsubishi FX5U series PLC 1204 1204 ... ... @@ -1277,7 +1277,7 @@ 1277 1277 (% style="text-align:center" %) 1278 1278 [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 1279 1279 1280 -== **FX5U Serial Port Protocol** ==731 +== **FX5U Serial Port** == 1281 1281 1282 1282 Mitsubishi FX5U series PLC 1283 1283 ... ... @@ -1369,7 +1369,7 @@ 1369 1369 1370 1370 **✎Note:** COM3 only available in PI8000/PI9000 series. 1371 1371 1372 -== **L02 MELSEC (Ethernet) Protocol** ==823 +== **L02 MELSEC (Ethernet)** == 1373 1373 1374 1374 Mitsubishi Q series CPU built-in Ethernet port. 1375 1375 ... ... @@ -1454,7 +1454,7 @@ 1454 1454 (% style="text-align:center" %) 1455 1455 [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 1456 1456 1457 -== **QJ71E71 MELSEC Protocol** ==908 +== **QJ71E71 MELSEC** == 1458 1458 1459 1459 Mitsubishi QJ71E71 Ethernet communication module; 1460 1460 ... ... @@ -2219,6 +2219,559 @@ 2219 2219 2220 2220 **✎Note:** COM3 only available in PI8000/PI9000 series. 2221 2221 1673 += **Siemens** = 1674 + 1675 +== **S7-200 Smart Ethernet** == 1676 + 1677 +Supported Series: Siemens S7-200 SMART Series Ethernet Module. 1678 + 1679 +Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]] 1680 + 1681 +**HMI Setting** 1682 + 1683 +(% class="table-bordered" %) 1684 +|**Items**|**Settings**|**Note** 1685 +|Protocol|Simens S7-200 Smart Ethernet| 1686 +|Connection|Ethernet| 1687 +|Port No.|102| 1688 +|PLC station No.|2| 1689 + 1690 +**Address List** 1691 + 1692 +(% class="table-bordered" %) 1693 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 1694 +|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 1695 +|Q|Q|Q ddddd.o|0.0~~99999.7| 1696 +|V|VWbit|VWbit ddddd.o|0.0~~99999.7| 1697 +|V|V|V ddddd.o|0.0~~99999.7| 1698 +|M|M|M ddddd.o|0.0~~99999.7| 1699 +|SM|SM|ddddd.o|0.0~~99999.7| 1700 +|S|S|ddddd.o|0.0~~99999.7|Read only 1701 +|T|T|ddddd|0~~99999|Timer state, read only 1702 +|C|C|ddddd|0~~99999|Counter state, read only 1703 +|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999| 1704 +|Q|QW|QW ddddd|0~~99999| 1705 +|AI|AIW|AIW ddddd|0~~99999| 1706 +|AQ|VB|VB ddddd|0~~99999| 1707 +|V|VW|VW ddddd|0~~99998|((( 1708 +VW0=VB (0~~1) 1709 + 1710 +VW2=VB (2~~3) 1711 + 1712 +Address value is a multiple of 2 1713 +))) 1714 +|V|VD|VD ddddd|0~~99998|((( 1715 +VD0=VB (0~~3) 1716 + 1717 +VD2=VB (4~~7) 1718 + 1719 +Address value is a multiple of 4 1720 +))) 1721 +|M|MB|MB ddddd|0~~99999| 1722 +|M|MW|MW ddddd|0~~99999|((( 1723 +MW0=MB(0~~1) 1724 + 1725 +MW2=MB(2~~3) 1726 + 1727 +Address value is a multiple of 2 1728 +))) 1729 +|M|MD|MD ddddd|0~~99999|((( 1730 +MD0=MB(0~~3) 1731 + 1732 +MD4=MB(4~~7) 1733 + 1734 +Address value is a multiple of 4 1735 +))) 1736 +|T|TW|TW ddddd|0~~99999|Value of timer 1737 +|C|CW|CW ddddd|0~~99999|Value of counter 1738 +|W|SW|SW ddddd|0~~99999| 1739 + 1740 +**Communication Settings** 1741 + 1742 +Enable HMI Ethernet in [Project Settings]; 1743 + 1744 +(% style="text-align:center" %) 1745 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 1746 + 1747 +Set PLC IP in [Device IP] settings; 1748 + 1749 +(% style="text-align:center" %) 1750 +[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]] 1751 + 1752 +* PLC IP Address: PLC IP 1753 +* PLC pot No.: 102(fixed) 1754 +* Network:TCP_Client_2N(fixed) 1755 + 1756 +(% style="text-align:center" %) 1757 +[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 1758 + 1759 +* Wait timeout: depend on actual network situation (more than 1500 ms) 1760 + 1761 +**Cable Wiring** 1762 + 1763 +(% style="text-align:center" %) 1764 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 1765 + 1766 +== **S7-300 Ethernet** == 1767 + 1768 +Supported Series: Siemens S7-300 series PLC 1769 + 1770 +**HMI Setting** 1771 + 1772 +(% class="table-bordered" %) 1773 +|**Items**|**Settings**|**Note** 1774 +|Protocol|Simens S7-300 Ethernet| 1775 +|Connection|Ethernet| 1776 +|Port No.|102| 1777 +|PLC station No.|2|Need to be same as the PLC setting 1778 + 1779 +**Address List** 1780 + 1781 +(% class="table-bordered" %) 1782 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 1783 +|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7| 1784 +|Q|Q|Q ddddd.o|0.0~~99999.7| 1785 +|M|M|M ddddd.o|0.0~~99999.7| 1786 +|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|((( 1787 +nn: block number; 1788 + 1789 +dddd: address; 1790 +))) 1791 +|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999| 1792 +|Q|QW|QW ddddd|0~~99999| 1793 +|(% rowspan="3" %)M|MB|MB ddddd|0~~99999| 1794 +|MW|MW ddddd|0~~99999|((( 1795 +MW0=MB(0~~1) 1796 + 1797 +MW2=MB(2~~3) 1798 + 1799 +Address value is a multiple of 2 1800 +))) 1801 +|MD|MD ddddd|0~~99999|((( 1802 +MD0=MB(0~~3) 1803 + 1804 +MD4=MB(4~~7) 1805 + 1806 +Address value is a multiple of 4 1807 +))) 1808 +|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)((( 1809 +nn: block number; 1810 + 1811 +dddd: address 1812 +))) 1813 +|DBxDBW|DBxDBW nndddd|0~~99999999 1814 +|DBxDBD|DBxDBD nndddd|0~~99999999 1815 + 1816 +**Communication Settings** 1817 + 1818 +Enable HMI Ethernet in [Project Settings]; 1819 + 1820 +(% style="text-align:center" %) 1821 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 1822 + 1823 +Set PLC IP in [Device IP] settings; 1824 + 1825 +(% style="text-align:center" %) 1826 +[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]] 1827 + 1828 +* PLC IP Address: PLC IP 1829 +* PLC pot No.: 102(fixed) 1830 +* Network:TCP_Client_2N(fixed) 1831 + 1832 +(% style="text-align:center" %) 1833 +[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]] 1834 + 1835 +* Wait timeout: depend on actual network situation (more than 1500 ms) 1836 + 1837 +**Cable Wiring** 1838 + 1839 +(% style="text-align:center" %) 1840 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 1841 + 1842 +== **S7-1200 Ethernet** == 1843 + 1844 +Supported Series: Siemens S7-1200 1845 + 1846 +**HMI Setting** 1847 + 1848 +(% class="table-bordered" %) 1849 +|**Items**|**Settings**|**Note** 1850 +|Protocol|Siemens S7-1200| 1851 +|Connection|Ethernet| 1852 +|Port No.|102| 1853 +|PLC station No.|2| 1854 + 1855 +**Address List** 1856 + 1857 +(% class="table-bordered" %) 1858 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 1859 +|(% rowspan="4" %)Bit|I|I|M d.o|((( 1860 +d:0~-~-9999 1861 + 1862 +o:0-7 1863 +)))| 1864 +|Q|Q|Q d.o|((( 1865 +d:0~-~-9999 1866 + 1867 +o:0-7 1868 +)))| 1869 +|M|M|M d.o|((( 1870 +d:0~-~-9999 1871 + 1872 +o:0-7 1873 +)))| 1874 +|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 1875 +nn:0-9999, 1876 + 1877 +dddd:0-9999, 1878 + 1879 +o:0-7 1880 +)))|((( 1881 +nn:DB No. 1882 + 1883 +dddd:address value 1884 + 1885 +o: digit address 1886 +))) 1887 +|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 1888 +|M|MW|MW d|d:0-99999|((( 1889 +MW0=MB(0~~1) 1890 + 1891 +MW2=MB(2~~3) 1892 + 1893 +Address value is a multiple of 2 1894 +))) 1895 +|M|MD|MD d|d:0-99999|((( 1896 +MD0=MB(0~~3) 1897 + 1898 +MD4=MB(4~~7) 1899 + 1900 +Address value is a multiple of 4 1901 +))) 1902 +|I|IW|IW d|d:0-99999| 1903 +|Q|QW|QW d|d:0-99999| 1904 +|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 1905 +nn:0-9999 1906 + 1907 +dddd:0-9999 1908 +)))|((( 1909 +nn:DB No. 1910 + 1911 +dddd:address value 1912 +))) 1913 +|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 1914 +nn:0-9999 1915 + 1916 +dddd:0-9999 1917 +)))|((( 1918 +nn:DB No. 1919 + 1920 +dddd:address value 1921 + 1922 +Address value is a multiple of 2 1923 +))) 1924 +|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 1925 +nn:0-9999 1926 + 1927 +dddd:0-9999 1928 +)))|((( 1929 +nn:DB No. 1930 + 1931 +dddd:address value 1932 + 1933 +Address value is a multiple of 4 1934 +))) 1935 + 1936 +**Communication Settings** 1937 + 1938 +Enable HMI Ethernet in [Project Settings]; 1939 + 1940 +(% style="text-align:center" %) 1941 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]] 1942 + 1943 +Set PLC IP in [Device IP] settings; 1944 + 1945 +(% style="text-align:center" %) 1946 +[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 1947 + 1948 +**✎Note:** 1949 + 1950 +* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 1951 +* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 1952 + 1953 +**PLC Settings** 1954 + 1955 +Add BD 1956 + 1957 +* Please uncheck [Symbolic access only] option; 1958 + 1959 +(% style="text-align:center" %) 1960 +[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]] 1961 + 1962 +Address settings, using BD2 as example. 1963 + 1964 +* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1. 1965 +* 2 represent DB block number 1966 +* xxxx represent address 1967 + 1968 +**Such as:** 1969 + 1970 +* DBxDBB20000 = DB2.DBB0 1971 +* DBxDBW20004 = DB2.DBW4 1972 + 1973 +(% style="text-align:center" %) 1974 +[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]] 1975 + 1976 +**How to connect with S7-1200 Firmware V4.0** 1977 + 1978 +PLC configuration 1979 + 1980 +* Double click [device configuration] in Siemens via software 1981 +* Double click [protection] to enter protection configuration screen 1982 + 1983 +(% style="text-align:center" %) 1984 +[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]] 1985 + 1986 +* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)] 1987 + 1988 +(% style="text-align:center" %) 1989 +[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]] 1990 + 1991 +DB settings 1992 + 1993 +* Right click [DB], select [properties] 1994 +* Uncheck [optimized block access] 1995 + 1996 +**Cable Wiring** 1997 + 1998 +(% style="text-align:center" %) 1999 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 2000 + 2001 +== **LOGO Ethernet** == 2002 + 2003 +Supported Series: Siemens Logo 0BA0 series 2004 + 2005 +**HMI Settings** 2006 + 2007 +(% class="table-bordered" %) 2008 +|**Items**|**Settings**|**Note** 2009 +|Protocol|Siemens LOGO| 2010 +|Connection|Ethernet| 2011 +|Port No.|102| 2012 +|PLC station No.|2| 2013 + 2014 +**Address List** 2015 + 2016 +(% class="table-bordered" %) 2017 +|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address** 2018 +|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0 2019 +|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000 2020 +|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000 2021 +|4|VW|Word|0-1468|DB1.DBX0.0|0x000000 2022 +|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0 2023 +|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770 2024 +|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0 2025 +|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180 2026 +|9|AI|Word|1-16|DB1.DBX1032.0|0x002040 2027 +|10|I|Bit|1-64|DB1.DBX1024.0|0x002000 2028 +|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140 2029 +|12|M|Bit|1-112|DB1.DBX1104.0|0x002280 2030 +|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0 2031 +|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70 2032 +|15|V|Bit|0-14697|DB1.DBX0.0|0x000000 2033 + 2034 +**PLC Settings in LOGO Software:** 2035 + 2036 +Click [Tools]~-~-[Ethernet Connections],shown as below. 2037 + 2038 +(% style="text-align:center" %) 2039 +[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]] 2040 + 2041 +Set Ethernet connection parameter. IP, Subnet Mask, shown as below. 2042 + 2043 +(% style="text-align:center" %) 2044 +[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]] 2045 + 2046 +**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below. 2047 + 2048 +(% style="text-align:center" %) 2049 +[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]] 2050 + 2051 +**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download. 2052 + 2053 +(% style="text-align:center" %) 2054 +[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]] 2055 + 2056 + 2057 +(% style="text-align:center" %) 2058 +[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]] 2059 + 2060 + 2061 +**HMI Communication Settings** 2062 + 2063 +Set PLC IP in [Device IP] settings; 2064 + 2065 +(% style="text-align:center" %) 2066 +[[image:SiemensLOGODeviceIP.png]] 2067 + 2068 +Enable HMI Ethernet in [Project Settings]; 2069 + 2070 +(% style="text-align:center" %) 2071 +[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]] 2072 + 2073 +TSAP setting 2074 + 2075 +* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register. 2076 +* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC. 2077 +* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC. 2078 + 2079 +**✎Note:** 2080 + 2081 +* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192. 2082 + 2083 +(% style="text-align:center" %) 2084 +[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]] 2085 + 2086 + 2087 +* AI word address and Ibit address are read-only and cannot be written on HMI. 2088 +* VW address should be even number.such as VW0, VW2, VW4... 2089 +* VD address it takes two VW addresses.such as VD0,VD4,VD8... 2090 +* Written value of RTC cannot exceed 255. 2091 + 2092 +**Cable Wiring** 2093 + 2094 +(% style="text-align:center" %) 2095 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 2096 + 2097 +== **S7-XXX Ethernet** == 2098 + 2099 +Supported Series: Siemens S7-400, S7-1200 and S7-1500 2100 + 2101 +**HMI Setting** 2102 + 2103 +(% class="table-bordered" style="width:823px" %) 2104 +|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note** 2105 +|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %) 2106 +|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %) 2107 +|Port No.|(% style="width:437px" %)102|(% style="width:201px" %) 2108 +|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %) 2109 +|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %) 2110 + 2111 +Slot from TIA Portal is equal to Device No. of PIStudio 2112 + 2113 +Rack from TIA Portal is equal to HMI No. of PIStudio 2114 + 2115 +(% style="text-align:center" %) 2116 +[[image:S7-XXXCommunication Settings.png]] 2117 + 2118 +(% style="text-align:center" %) 2119 +[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]] 2120 + 2121 +**Address List** 2122 + 2123 +(% class="table-bordered" %) 2124 +|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note** 2125 +|(% rowspan="4" %)Bit|I|I|M d.o|((( 2126 +d:0~-~-9999 2127 + 2128 +o:0-7 2129 +)))| 2130 +|Q|Q|Q d.o|((( 2131 +d:0~-~-9999 2132 + 2133 +o:0-7 2134 +)))| 2135 +|M|M|M d.o|((( 2136 +d:0~-~-9999 2137 + 2138 +o:0-7 2139 +)))| 2140 +|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|((( 2141 +nn:0-9999, 2142 + 2143 +dddd:0-9999, 2144 + 2145 +o:0-7 2146 +)))|((( 2147 +nn:DB No. 2148 + 2149 +dddd:address value 2150 + 2151 +o: digit address 2152 +))) 2153 +|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999| 2154 +|M|MW|MW d|d:0-99999|((( 2155 +MW0=MB(0~~1) 2156 + 2157 +MW2=MB(2~~3) 2158 + 2159 +Address value is a multiple of 2 2160 +))) 2161 +|M|MD|MD d|d:0-99999|((( 2162 +MD0=MB(0~~3) 2163 + 2164 +MD4=MB(4~~7) 2165 + 2166 +Address value is a multiple of 4 2167 +))) 2168 +|I|IW|IW d|d:0-99999| 2169 +|Q|QW|QW d|d:0-99999| 2170 +|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|((( 2171 +nn:0-9999 2172 + 2173 +dddd:0-9999 2174 +)))|((( 2175 +nn:DB No. 2176 + 2177 +dddd:address value 2178 +))) 2179 +|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|((( 2180 +nn:0-9999 2181 + 2182 +dddd:0-9999 2183 +)))|((( 2184 +nn:DB No. 2185 + 2186 +dddd:address value 2187 + 2188 +Address value is a multiple of 2 2189 +))) 2190 +|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|((( 2191 +nn:0-9999 2192 + 2193 +dddd:0-9999 2194 +)))|((( 2195 +nn:DB No. 2196 + 2197 +dddd:address value 2198 + 2199 +Address value is a multiple of 4 2200 +))) 2201 + 2202 +**Communication Settings** 2203 + 2204 +Enable HMI Ethernet in [Project Settings]; 2205 + 2206 +(% style="text-align:center" %) 2207 +[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]] 2208 + 2209 +Set PLC IP in [Device IP] settings; 2210 + 2211 +(% style="text-align:center" %) 2212 +[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]] 2213 + 2214 +**✎Note:** 2215 + 2216 +* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens. 2217 +* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200. 2218 + 2219 +**Cable Wiring** 2220 + 2221 +{{id name="OLE_LINK8"/}} 2222 + 2223 +(% style="text-align:center" %) 2224 +[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]] 2225 + 2222 2222 = **User Defined Protocol** = 2223 2223 2224 2224 If the device does not support MODBUS standard, and the protocol is not list in PIStudio, then user can define the protocol by following instruction to realize simply communication functions like sending and receiving commands.