Changes for page 12 PLC Protocol OLD

Last modified by Mora Zhou on 2024/12/05 14:53

From 90.1 to 89.1 From 96.1 to 95.1

From version 95.1

edited by Ben
on 2022/08/29 14:42

Change comment: There is no comment for this version

To version 90.1

edited by Ben
on 2022/08/29 14:38

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -922,7 +922,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **S7-XXX Ethernet Protocol** ==
++== **S7-XXX Ethernet** ==
  Supported Series: Siemens S7-400, S7-1200 and S7-1500
@@ -1048,7 +1048,7 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet Protocol** ==
++== (% id="cke_bm_25456S" style="display:none" %)** **(%%)**LOGO Ethernet** ==
  Supported Series: Siemens Logo 0BA0 series
@@ -1145,7 +1145,7 @@
  = Create communication with **Mitsubishi** =
--== **FX1S, 1N, 2N Series Protocol** ==
++== **FX1S, 1N, 2N Series** ==
  Supported Series: Mitsubishi FX1S, FX1N, FX2N series
@@ -1198,7 +1198,7 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
--== **FX5U Ethernet Protocol** ==
++== **FX5U Ethernet** ==
  Mitsubishi FX5U series PLC
@@ -1277,7 +1277,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **FX5U Serial Port Protocol** ==
++== **FX5U Serial Port** ==
  Mitsubishi FX5U series PLC
@@ -1369,7 +1369,7 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
--== **L02 MELSEC (Ethernet) Protocol** ==
++== **L02 MELSEC (Ethernet)** ==
  Mitsubishi Q series CPU built-in Ethernet port.
@@ -1454,7 +1454,7 @@
  (% style="text-align:center" %)
  [[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
--== **QJ71E71 MELSEC Protocol** ==
++== **QJ71E71 MELSEC** ==
  Mitsubishi QJ71E71 Ethernet communication module;
@@ -2219,6 +2219,559 @@
  **✎Note:** COM3 only available in PI8000/PI9000 series.
++= **Siemens** =
++
++== **S7-200 Smart Ethernet** ==
++
++Supported Series: Siemens S7-200 SMART Series Ethernet Module.
++
++Website: [[http:~~/~~/www.siemens.com/entry/cc/en/>>url:http://www.siemens.com/entry/cc/en/]]
++
++**HMI Setting**
++
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|Simens S7-200 Smart Ethernet|
++|Connection|Ethernet|
++|Port No.|102|
++|PLC station No.|2|
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
++|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
++|Q|Q|Q ddddd.o|0.0~~99999.7|
++|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
++|V|V|V ddddd.o|0.0~~99999.7|
++|M|M|M ddddd.o|0.0~~99999.7|
++|SM|SM|ddddd.o|0.0~~99999.7|
++|S|S|ddddd.o|0.0~~99999.7|Read only
++|T|T|ddddd|0~~99999|Timer state, read only
++|C|C|ddddd|0~~99999|Counter state, read only
++|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
++|Q|QW|QW ddddd|0~~99999|
++|AI|AIW|AIW ddddd|0~~99999|
++|AQ|VB|VB ddddd|0~~99999|
++|V|VW|VW ddddd|0~~99998|(((
++VW0=VB (0~~1)
++
++VW2=VB (2~~3)
++
++Address value is a multiple of 2
++)))
++|V|VD|VD ddddd|0~~99998|(((
++VD0=VB (0~~3)
++
++VD2=VB (4~~7)
++
++Address value is a multiple of 4
++)))
++|M|MB|MB ddddd|0~~99999|
++|M|MW|MW ddddd|0~~99999|(((
++MW0=MB(0~~1)
++
++MW2=MB(2~~3)
++
++Address value is a multiple of 2
++)))
++|M|MD|MD ddddd|0~~99999|(((
++MD0=MB(0~~3)
++
++MD4=MB(4~~7)
++
++Address value is a multiple of 4
++)))
++|T|TW|TW ddddd|0~~99999|Value of timer
++|C|CW|CW ddddd|0~~99999|Value of counter
++|W|SW|SW ddddd|0~~99999|
++
++**Communication Settings**
++
++Enable HMI Ethernet in [Project Settings];
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
++
++Set PLC IP in [Device IP] settings;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_70b0c4c2ee21b10d.png||data-xwiki-image-style-alignment="center" height="189" width="554" class="img-thumbnail"]]
++
++* PLC IP Address: PLC IP
++* PLC pot No.: 102(fixed)
++* Network:TCP_Client_2N(fixed)
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
++
++* Wait timeout: depend on actual network situation (more than 1500 ms)
++
++**Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++
++== **S7-300 Ethernet** ==
++
++Supported Series: Siemens S7-300 series PLC
++
++**HMI Setting**
++
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|Simens S7-300 Ethernet|
++|Connection|Ethernet|
++|Port No.|102|
++|PLC station No.|2|Need to be same as the PLC setting
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
++|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
++|Q|Q|Q ddddd.o|0.0~~99999.7|
++|M|M|M ddddd.o|0.0~~99999.7|
++|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
++nn: block number;
++
++dddd: address;
++)))
++|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
++|Q|QW|QW ddddd|0~~99999|
++|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
++|MW|MW ddddd|0~~99999|(((
++MW0=MB(0~~1)
++
++MW2=MB(2~~3)
++
++Address value is a multiple of 2
++)))
++|MD|MD ddddd|0~~99999|(((
++MD0=MB(0~~3)
++
++MD4=MB(4~~7)
++
++Address value is a multiple of 4
++)))
++|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
++nn: block number;
++
++dddd: address
++)))
++|DBxDBW|DBxDBW nndddd|0~~99999999
++|DBxDBD|DBxDBD nndddd|0~~99999999
++
++**Communication Settings**
++
++Enable HMI Ethernet in [Project Settings];
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
++
++Set PLC IP in [Device IP] settings;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_910b1a0aa9e2201c.png||data-xwiki-image-style-alignment="center" height="188" width="554" class="img-thumbnail"]]
++
++* PLC IP Address: PLC IP
++* PLC pot No.: 102(fixed)
++* Network:TCP_Client_2N(fixed)
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_5891afd92901b7ad.png||data-xwiki-image-style-alignment="center" height="276" width="347" class="img-thumbnail"]]
++
++* Wait timeout: depend on actual network situation (more than 1500 ms)
++
++**Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++
++== **S7-1200 Ethernet** ==
++
++Supported Series: Siemens S7-1200
++
++**HMI Setting**
++
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|Siemens S7-1200|
++|Connection|Ethernet|
++|Port No.|102|
++|PLC station No.|2|
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
++|(% rowspan="4" %)Bit|I|I|M d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|Q|Q|Q d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|M|M|M d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
++nn:0-9999,
++
++dddd:0-9999,
++
++o:0-7
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++o: digit address
++)))
++|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
++|M|MW|MW d|d:0-99999|(((
++MW0=MB(0~~1)
++
++MW2=MB(2~~3)
++
++Address value is a multiple of 2
++)))
++|M|MD|MD d|d:0-99999|(((
++MD0=MB(0~~3)
++
++MD4=MB(4~~7)
++
++Address value is a multiple of 4
++)))
++|I|IW|IW d|d:0-99999|
++|Q|QW|QW d|d:0-99999|
++|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++)))
++|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++Address value is a multiple of 2
++)))
++|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++Address value is a multiple of 4
++)))
++
++**Communication Settings**
++
++Enable HMI Ethernet in [Project Settings];
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-thumbnail"]]
++
++Set PLC IP in [Device IP] settings;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
++
++**✎Note:**
++
++* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
++* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
++
++**PLC Settings**
++
++Add BD
++
++* Please uncheck [Symbolic access only] option;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_643144c591994418.png||data-xwiki-image-style-alignment="center" height="546" width="550" class="img-thumbnail"]]
++
++Address settings, using BD2 as example.
++
++* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
++* 2 represent DB block number
++* xxxx represent address
++
++**Such as:**
++
++* DBxDBB20000 = DB2.DBB0
++* DBxDBW20004 = DB2.DBW4
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_87ceaea84d552e62.png||data-xwiki-image-style-alignment="center" height="245" width="537" class="img-thumbnail"]]
++
++**How to connect with S7-1200 Firmware V4.0**
++
++PLC configuration
++
++* Double click [device configuration] in Siemens via software
++* Double click [protection] to enter protection configuration screen
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_9779940d38da8e07.png||data-xwiki-image-style-alignment="center" height="426" width="341" class="img-thumbnail"]]
++
++* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_d2c667b02f9720b1.png||data-xwiki-image-style-alignment="center" height="296" width="554" class="img-thumbnail"]]
++
++DB settings
++
++* Right click [DB], select [properties]
++* Uncheck [optimized block access]
++
++**Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++
++== **LOGO Ethernet** ==
++
++Supported Series: Siemens Logo 0BA0 series
++
++**HMI Settings**
++
++(% class="table-bordered" %)
++|**Items**|**Settings**|**Note**
++|Protocol|Siemens LOGO|
++|Connection|Ethernet|
++|Port No.|102|
++|PLC station No.|2|
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
++|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
++|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
++|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
++|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
++|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
++|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
++|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
++|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
++|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
++|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
++|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
++|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
++|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
++|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
++|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
++
++**PLC Settings in LOGO Software:**
++
++Click [Tools]~-~-[Ethernet Connections],shown as below.
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_8b9d2322edf89519.png||data-xwiki-image-style-alignment="center" height="641" width="423" class="img-thumbnail"]]
++
++Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_6c4dd041b26cd8a1.png||data-xwiki-image-style-alignment="center" height="481" width="363" class="img-thumbnail"]]
++
++**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_7af2611d3790a77d.png||data-xwiki-image-style-alignment="center" height="359" width="426" class="img-thumbnail"]]
++
++**Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_3243e4cd600595cc.png||data-xwiki-image-style-alignment="center" height="368" width="554" class="img-thumbnail"]]
++
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_cb1d92e2cc91a8db.png||data-xwiki-image-style-alignment="center" height="320" width="553" class="img-thumbnail"]]
++
++
++**HMI Communication Settings**
++
++Set PLC IP in [Device IP] settings;
++
++(% style="text-align:center" %)
++[[image:SiemensLOGODeviceIP.png]]
++
++Enable HMI Ethernet in [Project Settings];
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_95917a3d92068467.png||data-xwiki-image-style-alignment="center" height="311" width="553" class="img-thumbnail"]]
++
++TSAP setting
++
++* Regarding the setting of PLC TSAP, HMI provides system special address for setting, it is recommended to run in HMI script initialization, write PLC TSAP to corresponding system special register.
++* HSW10118 = local TSAP of HMI, this is remote TSAP of PLC.
++* HSW10119 = Remote TSAP of HMI, this is local TSAP of PLC.
++
++**✎Note:**
++
++* The data of TSAP is hexadecimal format. For example: the remote TSAP configured in the PLC is set to 20.00, then HSW10118 should be set to 0x2000, that is, HSW10118 = 8192.
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_5c6374b21f46e01e.png||data-xwiki-image-style-alignment="center" height="139" width="498" class="img-thumbnail"]]
++
++
++* AI word address and Ibit address are read-only and cannot be written on HMI.
++* VW address should be even number.such as VW0, VW2, VW4...
++* VD address it takes two VW addresses.such as VD0,VD4,VD8...
++* Written value of RTC cannot exceed 255.
++
++**Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++
++== **S7-XXX Ethernet** ==
++
++Supported Series: Siemens S7-400, S7-1200 and S7-1500
++
++**HMI Setting**
++
++(% class="table-bordered" style="width:823px" %)
++|=**Items**|=(% style="width: 437px;" %)**Settings**|=(% style="width: 201px;" %)**Note**
++|Protocol|(% style="width:437px" %)Siemens S7-XXX|(% style="width:201px" %)
++|Connection|(% style="width:437px" %)Ethernet|(% style="width:201px" %)
++|Port No.|(% style="width:437px" %)102|(% style="width:201px" %)
++|Device No.|(% style="width:437px" %)Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|(% style="width:201px" %)
++|HMI No.|(% style="width:437px" %)Rack (Default as 0)|(% style="width:201px" %)
++
++Slot from TIA Portal is equal to Device No. of PIStudio
++
++Rack from TIA Portal is equal to HMI No. of PIStudio
++
++(% style="text-align:center" %)
++[[image:S7-XXXCommunication Settings.png]]
++
++(% style="text-align:center" %)
++[[image:S7-XXXCommunication SettingsPIStudio.png||alt="S7-XXXCommunication SettingsPI.png"]]
++
++**Address List**
++
++(% class="table-bordered" %)
++|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
++|(% rowspan="4" %)Bit|I|I|M d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|Q|Q|Q d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|M|M|M d.o|(((
++d:0~-~-9999
++
++o:0-7
++)))|
++|DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
++nn:0-9999,
++
++dddd:0-9999,
++
++o:0-7
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++o: digit address
++)))
++|(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
++|M|MW|MW d|d:0-99999|(((
++MW0=MB(0~~1)
++
++MW2=MB(2~~3)
++
++Address value is a multiple of 2
++)))
++|M|MD|MD d|d:0-99999|(((
++MD0=MB(0~~3)
++
++MD4=MB(4~~7)
++
++Address value is a multiple of 4
++)))
++|I|IW|IW d|d:0-99999|
++|Q|QW|QW d|d:0-99999|
++|DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++)))
++|DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++Address value is a multiple of 2
++)))
++|DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
++nn:0-9999
++
++dddd:0-9999
++)))|(((
++nn:DB No.
++
++dddd:address value
++
++Address value is a multiple of 4
++)))
++
++**Communication Settings**
++
++Enable HMI Ethernet in [Project Settings];
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_43b671f18153910d.png||data-xwiki-image-style-alignment="center" height="107" width="405" class="img-rounded img-thumbnail"]]
++
++Set PLC IP in [Device IP] settings;
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_f7b3eb9abda33833.png||data-xwiki-image-style-alignment="center" height="190" width="554" class="img-thumbnail"]]
++
++**✎Note:**
++
++* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three touch screens.
++* HMI access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
++
++**Cable Wiring**
++
++{{id name="OLE_LINK8"/}}
++
++(% style="text-align:center" %)
++[[image:12.PLC Protocol_html_2297240b57346b2a.png||data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
++
  = **User Defined Protocol** =
  If the device does not support MODBUS standard, and the protocol is not list in PIStudio, then user can define the protocol by following instruction to realize simply communication functions like sending and receiving commands.

Changes for page 12 PLC Protocol OLD

Summary

Details

Navigation

Table of Contents