14 HMI settings

This chapter will introduce some of the other things of the PI series HMI.

= Regular series settings =

Setup menu is used for settings HMI system when HMI is running. Such as communication parameters, real time clock, and other functions.

6

7

The setup menu interface of V2.0 (in the bottom right corner) version is shown in the below.

8

9

(% style="text-align:center" %)

10

[[image:15.Others_html_676928fbdca55f5b.gif||class="img-thumbnail"]]

11

12

Press the upper right corner to set the displayed language. The default display language of the backend system will be associated with the display language type of the software during project editing.

13

14

1. If the software is displayed in Chinese, then the system default language is simplified Chinese and could be switch to English.

15

1. If the software is displayed in another language , then the system default language is English and couldn't be switch to English.

16

17

== Update project/firmware ==

18

19

Those functions are used for update HMI project or firmware via USB flash disk.

20

21

**Operating procedures**

22

23

1. Generate the project file (firmware) in the u disk first.

24

1. Select "Update project" as the figure above, and pop-up a screen as the figure below. It displays all the projects in the Udisk. (file with the suffixes ".fos" and ".wpj"). The files with the suffix of "fos" is created by old software, and the file with the suffix of "wpj" is supported by V2.0 (user-defined file names are supported).

25

26

(% style="text-align:center" %)

27

[[image:15.Others_html_7afe6150aa4626c9.gif||class="img-thumbnail"]]

28

29

(% start="3" %)

30

1. After selecting a project file, the following interface will pop up: Select whether to retain the parameters of the original project in the HMI when downloading the new project (by default, all will be deleted).

31

32

[[image:image-20220527113503-2.jpeg]]

33

34

(% start="4" %)

35

1. User could select according to the "Extensions" on the upper right corner of the option box (as shown in the figure below), and retain some configuration files of the original project (please choose carefully as needed to avoid error in application).

36

37

[[image:image-20220527113524-3.jpeg]]

38

39

(% start="5" %)

40

1. Click "OKClick "" to delete unchecked item. Click Cancel to retain all data.

41

1. After downloading project successfully, the following prompt will appear.

42

43

(% class="wikigeneratedid" %)

44

[[image:image-20220527113609-5.jpeg]]

45

46

== Configure network ==

47

48

The network is used for setting and checking the network state of the HMI. All PI series HMI support Ethernet and WIFI (WIFI requires specified USB WIFI device). Click "network" in menu screen to access network configuration interface as below.

49

50

[[image:image-20220527164917-1.png]]

=== WIFI ===

(% class="wikigeneratedid" %)

55

~1. Enable the "WIFI" function, the HMI will search for WIFI signals as shown below.

56

57

(% style="text-align:center" %)

58

[[image:15.Others_html_20cf62745f18e9c8.gif]]

59

60

2. Select a WIFI, it will pop up a keyboard to input password.

61

62

[[image:image-20220527114024-11.png||class="img-thumbnail"]]

63

64

3. After inputting correct password, HMI will get a dynamic IP.

65

66

[[image:image-20220527114044-12.png||class="img-thumbnail"]]

=== Ethernet ===

~1. Enable the "Ethernet" function. If the network connection is normal, the IP address and MAC address of the HMI will be displayed, as shown in the following figure.

71

72

[[image:image-20220527114108-13.png]]2. Click "Eth Test" to pop up test window as shown below.

73

74

[[image:image-20220527114154-14.png]]3. Click [[image:15.Others_html_19f0bac1d64f68dd.gif]] to select DHCP or Static IP as below.

75

76

(% style="text-align:center" %)

77

[[image:15.Others_html_673b40da4c8d87a5.gif||class="img-thumbnail"]]

78

79

= **ig series settings** =

80

81

Long press the upper right corner of HMI, the system setting interface of ig HMI would be displayed as below.

82

83

[[image:image-20220527114512-17.png||height="557" width="998"]]

84

85

* HMI information

86

** Model: the model of HMI

87

** Serial NO. : the serial number of HMI

88

** Machine ID: the machine code of HMI. The first 20 digits are the serial number.

89

* HMI: Display the version information of the HMI

90

* The icons in the lower right corner are USB-A device, 4G network, Ethernet network, WIFI network and cloud access network status respectively. Green indicates that the device/network is available. Black indicates that the device/network is unavailable.

91

92

(% class="table-bordered" %)

93

|(% style="width:70px" %)[[image:image-20220530105741-4.png]]|(% style="width:392px" %)USB-A device is not connected|(% style="width:68px" %)[[image:image-20220530105825-12.png]]|(% style="width:348px" %)USB-A device is connected

94

|(% style="width:70px" %)[[image:image-20220530105809-7.png]]|(% style="width:392px" %)4G network is disconnected. |(% style="width:68px" %)[[image:image-20220530105820-11.png]]|(% style="width:348px" %)4G network is connected.

95

|(% style="width:70px" %)[[image:image-20220530105803-6.png]]|(% style="width:392px" %)Ethernet is disconnected. |(% style="width:68px" %)[[image:image-20220530105827-13.png]]|(% style="width:348px" %)Ethernet is connected.

96

|(% style="width:70px" %)[[image:image-20220530105812-8.png]]|(% style="width:392px" %)WLAN network is disconnected. |(% style="width:68px" %)[[image:image-20220530105830-14.png]]|(% style="width:348px" %)WLAN network is connected.

97

|(% style="width:70px" %)[[image:image-20220530105815-9.png]]|(% style="width:392px" %)The current network status cannot be uploaded to the cloud.|(% style="width:68px" %)[[image:image-20220530105833-15.png]]|(% style="width:348px" %)The current network status can be uploaded to the cloud.

== Ethernet ==

If the Ethernet function is enabled and the network connection is normal, the IP address and MAC address of the HMI are displayed, as shown in the following figure.

102

103

[[image:image-20220806133938-1.jpeg]]

104

105

(% class="wikigeneratedid" %)

106

**static IP: **Click the corresponding horizontal line to change the IP address, as shown in the following figure.

107

108

(% class="wikigeneratedid" %)

109

[[image:image-20220806134316-3.jpeg]]

== System ==

[[image:image-20220806134653-5.jpeg]]

**General**

General settings of the system include: data/time, time zone, backlight time, brightness, beep, beep time, beep tone.

118

119

* **Data/time: **Display the current system time. Click the horizontal line can change it directly, and click save after modifying, otherwise the modification is invalid.

120

* **Time zone: **The legal area of common time standard, default "China/beijing".

121

* **Backlight time: **Set the rest time after the HMI is not operated for a long time, the maximum is 3600 seconds.

122

* **Brightness**: set the brightness of HMI.

123

* **Beep:** Activate and deactivate the beep.

124

* **Beep time: **0 to1000ms. The beep time length can be adjusted.

125

* **Beep tone: **Adjust the beep sound, and five types are provided.

**COM settings**

COM settings include serial port number, HMI station number, device station number, serial port parameters, and timeout period. As shown in the picture below:

130

Do not change the settings at will. After modification, the device may fail to communicate.

131

132

[[image:image-20220806135928-6.jpeg]]

== Language ==

* If the software display language is Chinese, the default language of the system is simplified Chinese. You can switch it to English in settings (as shown in the following figure);

137

* If the software is displayed in other languages, the system will display English by default, and cannot switch to English in the setting.

138

139

[[image:image-20220806140111-8.jpeg]]

140

141

= Update PLC project =

142

143

This function is for update WECON PLC project via USB flash disk when HMI is communicating with PLC

144

145

**Operating procedures：**

146

147

1. Place update file into root directory of USB flash disk.(Default file name is update.bin, customizable)

148

1. Switch DIP (PLC) to stopped state.

149

1. Insert USB Flash disk into HMI.

150

1. Into HMI setup menu.

151

1. Select update PLC project.

152

1. When the HMI screen prompts "Download Successfully!", the PLC project download is complete.

**Video tutorial:**

* [[https:~~/~~/www.youtube.com/watch?v=OrhySI9bCUg>>https://www.youtube.com/watch?v=OrhySI9bCUg]]

**✎Note:**

* This function is available in PI series HMI.

161

* If project contains sub-program, the update time will be longer.

162

163

= **Recalibration** =

164

165

When the contact of the screen drifts or the coordinates of the HMI interface are shifted, the operation of the HMI will be inaccurate. In order to recalibrate the contact coordinates of the HMI interface, the calibration file in the HMI needs to be deleted and recalibrated.

166

167

There are two methods for recalibration.

**Method 1**

1. Connect HMI to PC via programming port (USB-B).

172

1. Power ON HMI, and open download tool as below.

173

174

(% style="text-align:center" %)

175

[[image:15.Others_html_58e7191ec477ff3f.gif||height="460" width="500" class="img-thumbnail"]]

176

177

(% start="3" %)

178

1. Please make sure HMI is detected by software.

179

1. Click [Recalibration], and restart HMI.

180

1. After HMI rebooting, it displays pictureas below.

181

182

(% style="text-align:center" %)

183

[[image:15.Others_html_44aaaa80672d0bd2.gif||class="img-thumbnail"]]

184

185

(% start="6" %)

186

1. Long press the center of '+', after success, it will automatically jump to the next '+', after calibrating the '+' point on the interface (a total of 5 '+' points), the HMI will prompt success, and re-load the project screen . (It is recommended to use a professional calibration pen);

**Method 2**

When there is no computer (PC) in the field,user could use the USB flash disk, and store a special file (DelTouch.dat) in the root directory of the U disk to perform the calibration operation.

191

192

**Operating procedure**

193

194

1. Create a TXT file on the PC side, write a integer value in the file, any integer from 1 to 180.This value is the countdown time of recalibration interface, unit:seconds.

195

1. Save the file and rename the TXT file to DelTouch.dat.

196

1. Save the file in the root directory of USB flash disk, and insert it to HMI device (USB-A).

197

1. Rebooting HMI.

198

1. After the system is loaded, there will be a prompt to "Calibrate after ~*~* seconds" at the top of the screen.

199

1. After completing the countdown, the HMI will run the command to delete the calibration, and the screen will automatically reboot after the calibration is deleted.

200

1. Remove the USB flash drive. The HMI will enter the calibration interface. According to step 6 of method 1, long press the center of "+" to recalibrate touch screen.

**✎Note:**

1. Content requirements for special documents (DelTouch.dat)

205

206

* The file content must be any integer from 1 to 180, and the unit defaults to seconds.

207

* If the value in the file content is greater than 180, it is calculated according to 180 seconds.

208

* If the content of the file is "less than 1, illegal characters, illegal characters + numbers", etc., it will be calculated in 30 seconds.

209

* If the content of the file is a number + illegal characters, the previous number will be used as the countdown time, such as 20s: the countdown time is 20 seconds.

(% start="2" %)

1. About Calibration

* The USB flash drive file must be recognized within 3 minutes after the HMI loads the system. Therefore, it is generally recommended to insert USB flash disk before HMI start to avoid unrecognized problems due to time errors.

215

216

= **Upgrade system** =

217

218

After enable the Upgrade System, the on-screen system HMI V1.0 can be upgraded to the new system HMI V2.0.

219

220

221

✎Note: If the HMI was produced before the year of 2019, it is not recommended to click the [Upgrade System] option.

**Precautions**

1. Do not cut off the download cable and power cable during the upgrade process, otherwise the upgrade may fail and the system cannot be accessed.

227

1. After the upgrade is successful, the data and projects on the screen will be deleted, please remember to backup first.

228

1. After upgraded, it cannot be rolled back to the previous version.

229

1. This upgrade will only upgrade the system and will not download the project. After restarting, it will prompt "The project is incomplete or the version is too low". The project needs to be upgraded and then downloaded again.

230

1. After the upgrade is successful, some functions will be affected and cannot be used, as shown in the table.

231

1. Specifically as shown in the table.

232

233

(% class="table-bordered" style="margin-left:auto; margin-right:auto" %)

234

|=(% colspan="4" %)**Missing functions & Alternatives after upgrade**

235

|**Category**|**Function**|(% style="width:309px" %)**Affected Models**|(% style="width:273px" %)**Alternative**

236

|(% colspan="1" rowspan="3" style="text-align:center; vertical-align:middle" %)Features|Camera (USB)|(% style="width:309px" %)8000, 9000, 8000+, 9000+|(% style="width:273px" %)

237

|Multi-link interconnection|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i|(% style="width:273px" %)

238

|Cloud SMS|(% style="width:309px" %)8000, 9000, 8000+, 9000+|(% style="width:273px" %)

239

|(% colspan="1" rowspan="9" style="text-align:center; vertical-align:middle" %)Custom Object|Custom_MoviePlayer|(% style="width:309px" %)9000, 9000+|(% style="width:273px" %)

240

|Custom_Dobby_Pattern|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i, 3000ie|(% style="width:273px" %)

241

|Custom_Glass|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i, 3000ie|(% style="width:273px" %)

242

|Custom_HisTrend|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i, 3000ie|(% style="width:273px" %)

243

|Custom_Tank|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i, 3000ie|(% style="width:273px" %)

244

|Custom_Weather|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i|(% style="width:273px" %)Weather forecast Lua script interface

245

|Custom_DCTU_WaterRes|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i|(% style="width:273px" %)

246

|Custom_DCTU_H212EPP|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i|(% style="width:273px" %)

247

|Custom_CsvTable|(% style="width:309px" %)3000, 8000, 9000|(% style="width:273px" %)

248

|(% colspan="1" rowspan="5" style="text-align:center; vertical-align:middle" %)Tool|(((

249

LAN monitoring software

250

251

(HMI Monitor System)

252

)))|(% style="width:309px" %)3000|(% style="width:273px" %)Webpage monitoring

253

|VNC|(% style="width:309px" %)3000i, 3000ie, 3000ig|(% style="width:273px" %)Webpage monitoring

254

|Smart APP|(% style="width:309px" %)8000, 9000, 8000+, 9000+|(% style="width:273px" %)V-Net APP

255

|Data Upload Tool|(% style="width:309px" %)3000, 8000, 9000, 3000+, 8000+, 9000+, 3000i, 3000ie|(% style="width:273px" %)PI Record Upload Tool

256

|PIRemote|(% style="width:309px" %)8000, 9000, 8000+, 9000+|(% style="width:273px" %)V-NET Access Client

**Upgrade Method**

**Method 1**: Open Download tool, and check the box of Upgrade System when downloading, as shown in the following figure:

261

262

(% style="text-align:center" %)

263

[[image:16.3UpgradeOSdownload box.png]]

264

265

**Method 2**: When creating a Udisk upgrade image, check the box of "OS version upgrade from V1.0 to V2.0" from the tab "HMI V2.0", as shown in the following figure:

266

267

(% style="text-align:center" %)

268

[[image:16.3UpgradeOS Udisk tool.png]]

269

270

= HMI Setting(V9.0) =

== Enter backend ==

1.Long press the upper right corner of the screen to enter the backend.

2.Special register

(% style="text-align:center" %)

279

[[image:1741057564985-211.png]]

280

281

|=Register|=(% style="width: 483px;" %)Meaning|=(% style="width: 590px;" %)How to use

282

|HSW884|(% style="width:483px" %)Enter the backend network setting page|(% style="width:590px" %)=1:Enter the backend network setting page

3.Floating

After download the project,the floating will appear in the screen.Click the floating to enter the backend.

287

288

(% style="text-align:center" %)

289

[[image:1741059802394-463.png]]

== Backend page ==

(% style="text-align:center" %)

294

[[image:1741069262187-242.png||height="358" width="637"]]

* Machine:

** Model: the model of HMI

299

** Serial NO. : the serial number of HMI

300

** Machine ID: the machine code of HMI. The first 20 digits are the serial number.

301

* Version: Display the version information of the HMI

302

* The icons in the up-right corner are USB-A device, Ethernet1 network, Ethernet2 network, WIFI network,4G network and cloud access network status respectively. Green indicates that the device/network is available. Black indicates that the device/network is unavailable.

== Network ==

Ethernet:

If the Ethernet function is enabled and the network connection is normal, the IP address and MAC address of the HMI are displayed.

309

310

**static IP: **Click the Statice IP,customer can change the IP freely.

311

312

(% style="text-align:center" %)

313

[[image:1741080279493-663.png||height="358" width="637"]]

WIFI / 4G:

The HMI with WIFI module or 4G module will display WIFI/4G configuration

318

319

(% style="text-align:center" %)

320

[[image:1741080847326-874.png||height="358" width="637"]]

Net Diag:

Detect the Internet status of each network card separately

325

326

(% style="text-align:center" %)

327

[[image:1741081432076-766.png||height="358" width="637"]]

== System ==

General:

settings of the system include: Device name,backlight time, beep,beep tone,floating.

334

335

* **Backlight time: **Set the rest time after the HMI is not operated for a long time, the maximum is 3600 seconds.

336

* **Beep:** Activate and deactivate the beep.

337

* **Beep time: **0 to1000ms. The beep time length can be adjusted.

338

* **Beep tone: **Adjust the beep sound, and five types are provided.

339

* **Floating: **Select whether to display the floating.

340

341

(% style="text-align:center" %)

342

[[image:1741081872904-291.png||height="358" width="637"]]

COM

COM settings include serial port number, HMI station number, device station number, serial port parameters, and timeout period. As shown in the picture below:

347

Do not change the settings at will. After modification, the device may fail to communicate.

348

349

(% style="text-align:center" %)

350

[[image:1741082864814-597.png||height="358" width="637"]]

Language

* If the software display language is Chinese, the default language of the system is simplified Chinese. You can switch it to English in settings (as shown in the following figure);

355

* If the software is displayed in other languages, the system will display English by default, and cannot switch to English in the setting.

356

357

(% style="text-align:center" %)

358

[[image:1741083047267-111.png||height="358" width="637"]]

TimeSet

* **Data/time: **Display the current system time. Click the horizontal line can change it directly, and click save after modifying, otherwise the modification is invalid.

363

* **Time zone: **The legal area of common time standard, default "UTC+8:00 Beijing".

364

* **Run Time:**Calculate the time since the HMI was last powered on.

365

366

(% style="text-align:center" %)

367

[[image:1741137395431-757.png||height="358" width="637"]]

== Cloud ==

* **Priority networding adapter:**Select the adapter to be used first when linking to the cloud.

372

* **Server:**Select the cloud server.

373

* **Current network status:**Green indicates that the device/network is available. Black indicates that the device/network is unavailable.

374

* **Test results:**Detect the Cloud status of each network card separately

375

376

(% style="text-align:center" %)

377

[[image:1741138410035-165.png||height="358" width="637"]]

= Remote Setting =

After enter the 'IP+:9091'.We can access the HMI remote setting page.The remote setting is synchronized with the system setting. When the data of the remote setting is changed, the status of the HMI will be modified synchronously

382

383

Default account and password:

**Account**:admin

**Password**:888888

(% style="text-align:center" %)