02 Special Function
Only specific model HMI support all the functions listed below.
1 Camera
All free drive USB camera can be supported,but USB camera resolution can not beyond HMI resolution. all IP cameras that support ONVIF protocol and H.264 encoding can be used.
The following models are tested camera models:
1) Hikvision
- DS-2CD1321D-I
- DS-2CD3T20FD-I3W
- DS-2CD1221D-I3
- DS-2CV3Q21FD-IW
2) Dahua
- DH-IPC-HFW1025D
- DH-IPC-HFW1235M-I1
2 Email
WECON HMI can support setting some specified conditions to make the specified mail information are sent to the relevant recipient, but email sending is basis of the network. (ie and IN series don't support Email function)
3 Printer
HMI supports USB printer and serial printer. Detail type of printer, please refer to download link.
4 Remote Control
Here provides three solutions to remote control HMI.
Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server.
Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link.
Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor.
5 Short Message
This is the extend function in WECON HMI. Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message.
6 Multi-Link
This function is for connect multi HMI by using same project in LAN network.
7 PI8150ig Video Display
This function is show PI8150ig's video playback.