Skip to Content

02 Special Function

Version 20.1 by Hunter on 2026/03/10 15:31

1 Camera

Error

✎Note: PIStudio supports both IP cameras and USB cameras. However, the currently available models do not support the USB camera function. Therefore, IP cameras should be used with priority. For function capabilities, please refer to the Function Limits table

In theory, IP cameras supporting H.264 and ONVIF can be connected to PI HMIs. Please ensure that the camera resolution and the camera object use the same aspect ratio as much as possible.

The following camera models have been tested and verified:

1) Hikvision

  • DS-2CD1321D-I
  • DS-2CD3T20FD-I3W
  • DS-2CD1221D-I3
  • DS-2CV3Q21FD-IW

2) Dahua

  • DH-IPC-HFW1025D
  • DH-IPC-HFW1235M-I1

3) EZVIZ

  • CS-C6N

Download link

2 Email

PIStudio supports email notifications. Contents may include text, alarms, and variables, and emails can be sent either by triggers or on a scheduled interval.

Information

For function capabilities, please refer to the Function Limits table

Download link

3 Printer

HMI supports USB printer and serial printer. Detail type of printer, please refer to download link.

Download link

4 Remote Control

Error

✎Note: The following solution is not recommended, as the related models(PI8000, PI9000, PI3000-O) have been discontinued for a long time. Please use the V-NET 2.0 Cloud platform and ig series HMI as the recommended remote access solution.

Here provides three solutions to remote control HMI.

Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server.

Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link.

Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor. 

5 Short Message

Error

✎Note: The SMS library is currently not supported on any currently available models. Please use the Lua SMS demo as the solution. For function capabilities, please refer to the Function Limits table

Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message.

6 Multi-Link(V1.0)

Error

✎Note: This old version of Multi-link only supports General Series HMIs and i Series HMIs. For ig HMIs, please refer to the YouTube video for the Multi-link implementation.

This function is for connect multi HMI by using same project in LAN network.

Download link

7 PI8150ig Video Display

This function is show PI8150ig's video playback.

Download link

8 MQTT tool

This function is link to MQTT server via MQTT tool in PIStudio.

Download link