Wiki source code of 02 Special Function
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
8.1 | 1 | (% id="H1OnlyspecificmodelHMIsupportalltheA0functionslistedbelow." %) |
| |
1.1 | 2 | = **1 Camera** = |
| 3 | |||
| |
3.1 | 4 | {{error}} |
| |
9.1 | 5 | ✎Note: PIStudio supports both IP cameras and USB cameras. However, **the currently available models do not support the USB camera function**. Therefore, IP cameras should be used with priority. For function capabilities, please refer to the [[Function Limits table>>doc:PIStudio.16 Appendix.WebHome||anchor="HPIStudioFunctionLimits"]] |
| |
3.1 | 6 | {{/error}} |
| 7 | |||
| |
7.1 | 8 | In theory, IP cameras supporting **H.264** and **ONVIF** can be connected to PI HMIs. Please ensure that the camera resolution and the camera object use the same aspect ratio as much as possible. |
| |
1.1 | 9 | |
| |
4.1 | 10 | The following camera models have been tested and verified: |
| |
1.1 | 11 | |
| 12 | 1) Hikvision | ||
| 13 | |||
| 14 | * DS-2CD1321D-I | ||
| 15 | * DS-2CD3T20FD-I3W | ||
| 16 | * DS-2CD1221D-I3 | ||
| 17 | * DS-2CV3Q21FD-IW | ||
| 18 | |||
| 19 | 2) Dahua | ||
| 20 | |||
| 21 | * DH-IPC-HFW1025D | ||
| 22 | * DH-IPC-HFW1235M-I1 | ||
| 23 | |||
| |
7.1 | 24 | 3) EZVIZ |
| 25 | |||
| 26 | * CS-C6N | ||
| 27 | |||
| |
4.1 | 28 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/New%20Demo/Camera%20FunctionsV2.zip]] |
| |
1.1 | 29 | |
| 30 | = **2 Email** = | ||
| 31 | |||
| |
11.1 | 32 | PIStudio supports email notifications. Contents may include text, alarms, and variables, and emails can be sent either by triggers or on a scheduled interval. |
| |
1.1 | 33 | |
| |
10.2 | 34 | {{info}} |
| 35 | For function capabilities, please refer to the [[Function Limits table>>doc:PIStudio.16 Appendix.WebHome||anchor="HPIStudioFunctionLimits"]] | ||
| 36 | {{/info}} | ||
| 37 | |||
| |
1.1 | 38 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Email%20Demo%20V1.2.zip]] |
| 39 | |||
| 40 | = **3 Printer** = | ||
| 41 | |||
| 42 | HMI supports USB printer and serial printer. Detail type of printer, please refer to download link. | ||
| 43 | |||
| |
12.1 | 44 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/New%20Demo/Printer%20DemoV2%28Epson%26Argox%26Save%20Screenshot%29.zip]] |
| |
1.1 | 45 | |
| 46 | = **4 Remote Control** = | ||
| 47 | |||
| |
13.1 | 48 | {{error}} |
| |
17.1 | 49 | ✎Note: The following solution is not recommended, as the related models(PI8000, PI9000, PI3000-O) have been discontinued for a long time. Please use the [[V-NET 2.0>>doc:V-Net 2\.0.WebHome]] Cloud platform and ig series HMI as the recommended remote access solution. |
| |
13.1 | 50 | {{/error}} |
| 51 | |||
| |
1.1 | 52 | Here provides three solutions to remote control HMI. |
| 53 | |||
| 54 | Solution1: HMI must be PI8000 or PI9000 with -R. Remote control with WECON cloud server. | ||
| 55 | |||
| 56 | Solution2: HMI must be PI8000 or PI9000. Remote control by router. Detail information is as below link. | ||
| 57 | |||
| 58 | Solution3: HMI must be PI3000 with -O model. Remote control by HMI System Monitor. | ||
| 59 | |||
| 60 | = **5 Short Message** = | ||
| 61 | |||
| |
17.1 | 62 | {{error}} |
| |
19.1 | 63 | ✎Note: The SMS library is currently not supported on any currently available models. Please use the [[Lua SMS demo>>doc:PIStudio.2 Demo.Lua Script.WebHome||anchor="H23LuaSMS"]] as the solution. For function capabilities, please refer to the [[Function Limits table>>doc:PIStudio.16 Appendix.WebHome||anchor="HPIStudioFunctionLimits"]] |
| |
17.1 | 64 | {{/error}} |
| |
1.1 | 65 | |
| |
17.1 | 66 | Extended a SMS module that must support AT command to communicate with HMI. Alarm information could be sent to users by short message, and users could control HMI by sending short message. |
| |
1.1 | 67 | |
| |
20.1 | 68 | = **6 Multi-Link(V1.0)** = |
| |
1.1 | 69 | |
| |
20.1 | 70 | {{error}} |
| 71 | ✎Note: This old version of Multi-link only supports General Series HMIs and i Series HMIs. For ig HMIs, please refer to the YouTube video for the Multi-link implementation. | ||
| 72 | {{/error}} | ||
| 73 | |||
| |
1.1 | 74 | This function is for connect multi HMI by using same project in LAN network. |
| 75 | |||
| 76 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/Multi%20Link-20241023T060038Z-001.zip]] | ||
| 77 | |||
| 78 | = **7 PI8150ig Video Display** = | ||
| 79 | |||
| 80 | This function is show PI8150ig's video playback. | ||
| 81 | |||
| 82 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/video%20display.zip]] | ||
| 83 | |||
| 84 | = 8 MQTT tool = | ||
| 85 | |||
| |
20.1 | 86 | This function is link to MQTT server via MQTT tool in PIStudio. |
| |
1.1 | 87 | |
| 88 | [[Download link>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Special%20Function/MQTT.rar]] |