Changes for page 3 Software
Last modified by Jett on 2025/03/13 14:13
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -242,6 +242,238 @@ 242 242 Fix other problems. 243 243 ))) 244 244 245 +Drive 246 + 247 +1. ShortMessage_Module message group sending timeout; 248 +1. When using Modbus_RTU_All Ethernet, the communication is reported error; 249 +1. ((( 250 +OpenCAN drive communication slowly; 251 +))) 252 +1. ((( 253 +WECON LX3VP recipe continuous reading fails; 254 +))) 255 +1. ((( 256 +WECON LX5V M address write instruction length error; 257 +))) 258 +1. ((( 259 +MIT QJ71 MELSEC PROTOCOL communication abnormally; 260 +))) 261 +1. ((( 262 +Mitsubishi FX3U Drive Counter negative value display error; 263 +))) 264 +1. ((( 265 +OpenCAN drive baud rate set error; 266 +))) 267 +1. ((( 268 +Omron CP2E and PI HMI/online stimulation communication timeout; 269 +))) 270 +1. ((( 271 +User-defined Protocol single sending cannot be used; 272 +))) 273 +1. ((( 274 +Incorrect display of 32-bit signed number in MITSUBISHI FX3U/3G/3SA address CH200; 275 +))) 276 +1. ((( 277 +A physical serial port double 485 will time out when communicating at the same time; 278 +))) 279 +1. ((( 280 +User-defined Protocol does not display in online simulation; 281 +))) 282 +1. ((( 283 +Abnormal communication of HMI with azbil protocol; 284 +))) 285 +1. ((( 286 +Siemens Protocol S7300 (with PC Adaptor New) DB address is not available; 287 +))) 288 +1. ((( 289 +Modbus_TCP_Master does not reply when sending read instruction; 290 +))) 291 +1. ((( 292 +USB printer protocol uses print object; the printing will print black edges; 293 +))) 294 +1. ((( 295 +SMS protocol cannot receive and send, Add ClrMsg register to delete all information; 296 +))) 297 +1. ((( 298 +MODBUS RTU Slave (All Function) broadcasting station number communication problem. Add BrtCat station number set registers. 299 +))) 300 +1. ((( 301 +Siemens 200SMART communication abnormally; 302 +))) 303 +1. ((( 304 +Xinjie XDH communication abnormally; 305 +))) 306 +1. ((( 307 +Drive customized protocol cache cannot be cleared; 308 +))) 309 +1. ((( 310 +Errors in DWORD read/write in INOVANCE H5U_Easy PLC Ethernet Protocol; 311 +))) 312 +1. ((( 313 +Parameters such as PI timeout reconnection are not valid; 314 +))) 315 +1. ((( 316 +The matching mode of user-defined protocol receiving first and then sending; 317 +))) 318 +1. ((( 319 +Fix other problems; 320 +))) 321 + 322 +**New functions** 323 + 324 +**PC Software** 325 + 326 +1. Data record db file merge function of DataLogTool (Only HMI V2.0 system supports); 327 +1. ((( 328 +Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports); 329 +))) 330 +1. ((( 331 +8000ig supports that the maximum number of configuring communication connections is 32 (Only HMI V2.0 system supports); 332 +))) 333 +1. ((( 334 +Curve object add 8 types of line configuration (Only HMI V2.0 system supports); 335 +))) 336 +1. ((( 337 +Ethernet communication supports the selection and settings of network card type (Only HMI V2.0 system supports); 338 +))) 339 +1. ((( 340 +Customized name configuration is added for communication port configuration, which can be used in address editing interface and address list interface (Only HMI V2.0 system supports); 341 +))) 342 +1. ((( 343 +**Improve compilation speed;** 344 +))) 345 +1. ((( 346 +**Function switch right-click selection to jump to the target screen;** 347 +))) 348 +1. ((( 349 +**Right-click the object and select jump to image gallery configuration;** 350 +))) 351 +1. ((( 352 +**String table configuration;** 353 +))) 354 +1. ((( 355 +**External keyboard shortcut configuration (Only ig series and MD series support);** 356 +))) 357 +1. ((( 358 +**Visual configuration of MQTT docking third-party platform (Only ig series and MD series support);** 359 +))) 360 +1. ((( 361 +**8070ig and 8102ig support video player controls.** 362 +))) 363 + 364 +HMI applications 365 + 366 +1. Countdown prompt to enter background (Only HMI V2.0 system supports); 367 +1. Background LAN security monitoring configuration (Only HMI V2.0 system supports); 368 +1. Background USB flash disk upgrade mirror limit fallback version (Only HMI V2.0 system supports); 369 +1. 8000ig double network port configuration (Only HMI V2.0 system supports); 370 +1. Support to modify Ethernet static IP configuration through special registers (Only HMI V2.0 system supports); 371 +1. User management supports multi languages (Only HMI V2.0 system supports); 372 +1. 8000ig supports video play (Only HMI V2.0 system supports); 373 +1. Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports); 374 +1. Dynamic screensaver (Only HMI V2.0 system supports); 375 +1. Lua SMS sending (only supported by HM I V2.0 system); 376 +1. Lua obtains SIM card information (Only HMI V2.0 system supports); 377 +1. Camera configuration (Only HMI V2.0 system supports); 378 +1. Support PI8000/PI9000 series update system without deleting project (Only HMI V2.0 system supports); 379 +1. Backstage supports multi languages switch and language customization (Only HMI V2.0 system supports); 380 +1. ((( 381 +When switching languages, clean up the screen cache (Only HMI V2.0 system supports); 382 +))) 383 +1. ((( 384 +Register HSW1890 triggers to refresh network signal (Only HMI V2.0 system supports); 385 +))) 386 +1. ((( 387 +Register HSW1891 controls the cleaning of the screen cache (Only HMI V2.0 system supports); 388 +))) 389 +1. ((( 390 +Background stimulates the terminal (Only HMI V2.0 system supports); 391 +))) 392 +1. ((( 393 +**Dynamic text (Only HMI V2.0 system supports);** 394 +))) 395 +1. ((( 396 +**External keyboard shortcut (Only ig series and MD series support);** 397 +))) 398 +1. ((( 399 +**HMIdevice name (Only HMI V2.0 system supports);** 400 +))) 401 +1. ((( 402 +**Background supports cloud server switching (Only general 8000 series with V2.0 system, ig series and MD series supports);** 403 +))) 404 +1. ((( 405 +**Support remote screen adaptation display of vertical screen project (Only HMI V2.0 system supports);** 406 +))) 407 +1. ((( 408 +**Common lua script function of verification algorithms (Only HMI V2.0 system supports);** 409 +))) 410 +1. ((( 411 +**INSeries (IN1071, IN1072, IN1073) does not distinguish models and supports mutual projects regardless of models;** 412 +))) 413 + 414 +Driver protocol 415 + 416 +1. WECON LX6V EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports); 417 +1. Rockwell EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports); 418 +1. OMRON EtherNet/IP (NX/NJ Series) (Tag protocol optimized version) (Only HMI V2.0 system supports); 419 +1. MODBUS RTU Slave (All Fuction OneBaseAddress) can customize broadcast address; 420 +1. SMS module can delete all information; 421 +1. INOVANCE H5U_Easy PLC driver protocol (Serial port); 422 +1. INOVANCE H5U_Easy free tag protocol drive; 423 +1. Xinjie XD/XE drive; 424 +1. Veichi V3 drive; 425 +1. Shihlin SX6V EtherNet/IP Protocol; 426 +1. CODESYS V3 drive; 427 +1. Modbus_Server_IoT_Plat drive; 428 +1. ((( 429 +MIT Q00H CPU Port PROTOCOL drive; 430 +))) 431 +1. ((( 432 +Schneider TM221 drive; 433 +))) 434 +1. ((( 435 +Delta_DVP_ModbusRTU drive; 436 +))) 437 +1. ((( 438 +INOVANCE H5U_Easy ModbusTCP drive; 439 +))) 440 +1. ((( 441 +Siemens S7-xxx Ethernet OP new drive; 442 +))) 443 +1. ((( 444 +MODBUS RTU Slave (All Function) protocol retry timeout time factor multiple ToMu; 445 +))) 446 +1. ((( 447 +Schneider TM221 drive; 448 +))) 449 + 450 +{{info}} 451 +**✎Note: The maximum communication number of free tag protocol and CODESYS V3 configuration in models of each series is shown in the following table.** 452 +{{/info}} 453 + 454 +|**Series model**|**Recommended maximum number of free tag protocols**|**Recommended maximum number of CODESYS V3 protocols** 455 +|8000 Series|4|Configuration is not supported. 456 +|3000 Series|Configuration is not supported.|Configuration is not supported. 457 +|9000 Series|Configuration is not supported.|Configuration is not supported. 458 +|3000i Series|Configuration is not supported.|Configuration is not supported. 459 +|ie Series (3043ies with network port)|2|Configuration is not supported. 460 +|ie Series (Other models)|Configuration is not supported.|Configuration is not supported. 461 +|3000ig Series|4|2 462 +|8000ig Series|6|2 463 +|MD3000 Series|4|Configuration is not supported. 464 +|IN Series|Configuration is not supported.|Configuration is not supported. 465 + 466 +(% class="wikigeneratedid" %) 467 +**New models** 468 + 469 +(1). ie Series: 3070ie-H; 470 + 471 +(2). IN Series: IN1071, IN1072, IN1073; 472 + 473 +(3). MD Series: MD3102; 474 + 475 +(4). ig Series: 3070ig-H, 3043ig, 8070ig, 8102ig, 8043ig; 476 + 245 245 == V8.2.95_D20220928 == 246 246 247 247 * Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio20220928.zip]] ... ... @@ -302,13 +302,13 @@ 302 302 1. The communication is disconnected and cannot be reconnected after ig series VPN penetrates; 303 303 1. Optimize the polling speed of VB trigger script; 304 304 305 -Drive the updated 537 +Drive the updated 306 306 307 307 1. The abnormal communication caused by recipe reading; 308 308 309 309 Driver Protocol 310 310 311 -1. Add Omron (NX/NJ) free labeldriver;543 +1. Add Omron (NX/NJ) free tag driver; 312 312 313 313 **New functions** 314 314