Changes for page 3 Software

Last modified by Jett on 2025/03/13 14:13

From 16.2 to 16.3 From 30.1 to 31.1

From version 16.3

edited by Mora Zhou
on 2023/10/27 09:38

Change comment: There is no comment for this version

To version 30.1

edited by Jett
on 2025/01/06 10:18

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 1 added, 0 removed)
- 1717728415376-899.png

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Mora
++XWiki.2454238480

Content

@@ -1,5 +1,191 @@
  = **1 PIStudio** =
++== **V9.1.18.24122702** ==
++
++* Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_9.1.18.24122702.zip]]
++
++**Bugs fixed**
++
++1. RE series V-BOX PLC Pass-through sometime can't work properly.
++1. RE series V-BOX data record upload can't work properly.
++1. PI8043ig and PI3041ig recipe object unable to display properly in web side.
++1. When entering the backstage for the first time after the screen is restarted, the first digit of the backstage password is invalid.
++1. PI8043ig project file is too large to the logo is stuck when HMI restarted.
++1. WIFI model can not enable after update the system.
++1. HMI crash and freeze when downloading PLC project.
++1. When the rectangle/arc/circle object is first initialized, a shadow will appears.
++1. The cloud icon in backstage state error.
++1. In off-line simulation.The left lable of Numeric Input/Display object affect natural decimal display.
++1. MQTT tool publish bit address,the length setting is not 1,message error.
++1. MQTT V5 protocol cannot automatically connect after network disconnection.
++1. The cloud management tool cannot log in to non-administrator users normally.
++1. Object lock does not work for bit switch momentary mode.
++1. WIFI is not connected, but IP still exists.
++1. The actual minimum pressing time of the function switch does not match the setting.
++1. RH-WF V-BOX indicator lamp display error.
++1. Data record display object start time setting error.
++1. The camera display object disappear after switching screens.
++1. After using the four arithmetic operations in address mapping, reading the value in read-only mode displays an abnormality.
++1. Object level password does not match the setting.
++1. In offline simulation, the new recipe tool crashes by clicking keyboard letters.
++1. Recipe name changes when switching screens.
++1. PLC program upload fails when PLC Pass-Through.
++1. IDEC MicroSmart Protocol:TC CC register modifying the value of the address results in an error in the value of the next address.
++1. Delta_AS300_TCP Protocol:D.b register cannot modify status.
++1. OPCUA Client:communication error but have no time-out message.
++1. IEC104client:HMI get black screen after downloading this protocol.
++
++**New functions**
++
++PC Software
++
++1. New project properties page.
++1. i/ie/ig/IN/RE/RH series all support screen style.
++1. Download tool support RE,RH series flash light and test network.
++1. New Device management tool.
++1. Software homepage embedded Wecon support center.
++1. Allow configuration preserve network configuration when download the project.
++1. Software online update.
++1. Scada canvas extension, new draft area.
++1. Recipe element support bit address.
++1. OPC UA server.
++1. New X,Y internal registers(RH series).
++1. 3000ig series Limitation of the Ethernet communication protocol up to 32.
++
++HMI Application
++
++1. New recipe object-Recipe Record:Integrated search, add, delete, download, upload, import, export, and switch recipe functions.
++1. New backstage:The background can be exited instead of restarted,New UI,Ethernet download PLC program,USB update support update the system and project at the same time.
++1. Remote backstage.
++1. New system keyboard.
++1. Character Input/Display object support multi line display.
++1. Character Input/Display object support choose data format(UTF-8/GBK/UNICODE).
++1. Numeric Input/Display object support more 64bit data format.
++1. Modification of serial port parameters takes effect immediately.
++1. RE series can be bound to V-NET.
++1. lua script open user permission function interface.
++1. New Multi-link function.
++1. New special registers related to automatic logout of user functionse.
++1. Alarm info support multiple variables.
++1. Min.hold time countdown.
++1. ig-O support Wecon 6V freetags protocol and CODESYS V3 protocol.
++1. (((
++New special registers related to displaying user storage space information.
++)))
++
++Driver protocol
++
++1. OPCUA Client.
++1. Siemens S7-1200/1500 Ethernet FreeTag.
++1. TwinCAT PLC Ethernet.
++1. KEYENCE KV-5000(Ethernet) using bit address in word address.
++
++**New model**
++
++1. RE series:RE-00,RE-00-LA,RE-4G,RE-4G-LA
++1. RH series:RH-WIFI
++1. ig series:PI3101ig,PI8101ig,PI8121ig
++
++**Notice**
++
++1. The new version can not support general series(PI3000,PI8000,PI9000).Please use the old version (Release Build VER:R05R998_V8.4.114_D24061301) to program the general series.
++1. Projects opened with the new version cannot be opened with the old version. Please make sure to back up the project.
++1. Cannot roll back the version after upgrading.
++1. After the upgrade, the supported protocols will change. For details, please refer to:[[Limitation of the Ethernet communication protocol - Wecon>>url:https://docs.we-con.com.cn/bin/view/PIStudio/PLC Protocol/Limitation of the Ethernet communication protocol/]]
++
++== **V8.4.114_D24061301** ==
++
++* Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_8.4.114.24061301.zip]]
++
++**Bugs fixed**
++
++PC Software
++
++1. When the MQTT sending mode is set a trigger, entering the trigger address directly cannot save．
++1. Arc object property page configuration angle cannot enter 0.
++1. Add the 5V protocol first, and then add the printer's protocol, can't change the protocol of the printer.
++1. The value of the meter and the color of the scale are inconsistent.
++1. After decompile tool open, the software crash.
++1. Off-line emulator run time the pictures of function switch object do not display.
++1. After deleting multiple screens, the software crash.
++1. After copying the local screen successfully, the directly compiled screen objects will be smaller than the modified screen objects.
++1. The same project file can be opened by multiple software at the same time.
++1. Object id duplication.
++1. The bar graph does not use variables, but when compiling, it prompts the variable address error.
++1. Using dynamic recipients, email addresses are not compiled and display recipient errors.
++1. The objects compile with the address error, but there is no note about what the address error is for which objects.
++1. When the circle/ellipse coords are in the negative area, no error message is displayed.
++1. When text library imports excel,the blank space and subsequent data cannot be imported.
++1. The function screen is deleted and then add it again.it cannot be added.
++1. The wrong continuous length when compiling the address of the data record.
++1. The wrong continuous length of lua script.
++1. PI3041ig configuration Ethernet 2 does not take effect.
++1. The wrong coord prompt when the rectangular objects is determined.
++1. The data record storage in project setting is error.
++1. Fix other problems.
++
++HMI Application
++
++1. The function is invalid after the function switch is pressed;
++1. The lua function io.open cannot open files under the u disk and sd card;
++1. The data record configuration data type is a string, the length is two characters, and it will be recorded more than two characters when data is collected record.
++1. The data type of the word switch is BCD code, and the increase and decrease do not follow the rule of the BCD code.
++1. "Database Format Mismatch" error after Lua script modifies table header.
++1. PI3070ig printing part text box printing font is not clear.
++1. In the offline simulation state, the graphics position offset occurs in the project with 1920*1080 resolution when the graphics are drawn by the address control.
++1. drawing when the graphics position offset.
++1. Receiving Data in Lua User Free Protocol 485 _ 2.
++1. Lua initialization uses the we_bas_jump screen function to jump to the screen is invalid, and there is a black screen.
++1. The data record cannot be recorded when the data record group id is 0.
++1. Value input objects check the display natural decimal function is invalid.
++1. To enable address control state text, must set the state sequence number, text content, and trigger settings.
++1. MQTT is published periodically, and changing the value of the address will also publish.
++1. The text on picture has a probability of becoming blurry.
++1. When the reset switch triggers hiding, it cannot automatically reset.
++1. Alarm records and data records are exported to CSV, and the table header does not switch with language switching.
++1. The screen alarm record csv exported using DbToCsvFile has no alarm content.
++1. The group number displayed in the recipe Group number address does not match the ID of the recipe display objects.
++1. When the number of recipe groups is set to 0, the file name address of the index does not change when there are multiple recipe files.
++1. The gallery is too large, causing crash.
++1. Drop down list username can't show multilingual.
++1. V-NET server anomaly causes device disconnection.
++1. The HMI goes off-line due to abnormal dialing of the 4G module.
++1. Recipe selected line ID does not match the ID in the address.
++1. The USB download project time is not updated, and the local time is not synchronized with the computer time.
++1. The keyboard screen cannot be closed normally through we_bas_closescreen function.
++1. The IE series uses calibri fonts and the screen display is in Song style.
++1. After setting floating setting as big-endian,the recipe table is displayed in Little-endian.
++1. Long press the bit switch, and then release the bit switch after entering the static screen saver , and the bit switch cannot be reset.
++1. After the function switch uses object password, the password is invalid after the screen jumps.
++1. PI8150ig makes the font size smaller when using calibri font.
++1. IN series long press upper left corner, upper right corner invalid.
++1. Fix other problems.
++
++Drive
++
++1. DELTA AS300 MODBUS TCP driver operation D.b bit address invalid.
++1. OMRONE5CC driver communication abnormal.
++1. Xunpu printer driver prints pictures abnormally.
++1. Rockwell Ethernet/IP (CompactLogix Series) driver communication exception.
++1. Siemens LOGO drive on-line simulation crash.
++1. Fix other problems.
++
++**New functions**
++
++Driver
++
++1. LS MASTER Protocol driver supports bit address selection of D register.
++1. TECO MP300 MODBUS TCP protocol.
++1. TECO MP300 MODBUS RTU protocol.
++
++**Precautions**
++
++Drive
++
++✎Note: WECON LX6V FreeTag Ethernet will not be maintained in the future, please switch to WECON LX6V EtherNet/IP.
++
++✎Note: WECON LX6V FreeTag Series will not be maintained in the future, please switch to Ethernet WECON LX6V EtherNet/IP
++
  == V8.4.66_D23102001 ==
  * Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_8.4.66.23102001.zip]]
@@ -242,6 +242,238 @@
  Fix other problems.
  )))
++Drive
++
++1. ShortMessage_Module message group sending timeout;
++1. When using Modbus_RTU_All Ethernet, the communication is reported error;
++1. (((
++OpenCAN drive communication slowly;
++)))
++1. (((
++WECON LX3VP recipe continuous reading fails;
++)))
++1. (((
++WECON LX5V M address write instruction length error;
++)))
++1. (((
++MIT QJ71 MELSEC PROTOCOL communication abnormally;
++)))
++1. (((
++Mitsubishi FX3U Drive Counter negative value display error;
++)))
++1. (((
++OpenCAN drive baud rate set error;
++)))
++1. (((
++Omron CP2E and PI HMI/online stimulation communication timeout;
++)))
++1. (((
++User-defined Protocol single sending cannot be used;
++)))
++1. (((
++Incorrect display of 32-bit signed number in MITSUBISHI FX3U/3G/3SA address CH200;
++)))
++1. (((
++A physical serial port double 485 will time out when communicating at the same time;
++)))
++1. (((
++User-defined Protocol does not display in online simulation;
++)))
++1. (((
++Abnormal communication of HMI with azbil protocol;
++)))
++1. (((
++Siemens Protocol S7300 (with PC Adaptor New) DB address is not available;
++)))
++1. (((
++Modbus_TCP_Master does not reply when sending read instruction;
++)))
++1. (((
++USB printer protocol uses print object; the printing will print black edges;
++)))
++1. (((
++SMS protocol cannot receive and send, Add ClrMsg register to delete all information;
++)))
++1. (((
++MODBUS RTU Slave (All Function) broadcasting station number communication problem. Add BrtCat station number set registers.
++)))
++1. (((
++Siemens 200SMART communication abnormally;
++)))
++1. (((
++Xinjie XDH communication abnormally;
++)))
++1. (((
++Drive customized protocol cache cannot be cleared;
++)))
++1. (((
++Errors in DWORD read/write in INOVANCE H5U_Easy PLC Ethernet Protocol;
++)))
++1. (((
++Parameters such as PI timeout reconnection are not valid;
++)))
++1. (((
++The matching mode of user-defined protocol receiving first and then sending;
++)))
++1. (((
++Fix other problems;
++)))
++
++**New functions**
++
++PC Software
++
++1. Data record db file merge function of DataLogTool (Only HMI V2.0 system supports);
++1. (((
++Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports);
++)))
++1. (((
++8000ig supports that the maximum number of configuring communication connections is 32 (Only HMI V2.0 system supports);
++)))
++1. (((
++Curve object add 8 types of line configuration (Only HMI V2.0 system supports);
++)))
++1. (((
++Ethernet communication supports the selection and settings of network card type (Only HMI V2.0 system supports);
++)))
++1. (((
++Customized name configuration is added for communication port configuration, which can be used in address editing interface and address list interface (Only HMI V2.0 system supports);
++)))
++1. (((
++**Improve compilation speed;**
++)))
++1. (((
++**Function switch right-click selection to jump to the target screen;**
++)))
++1. (((
++**Right-click the object and select jump to image gallery configuration;**
++)))
++1. (((
++**String table configuration;**
++)))
++1. (((
++**External keyboard shortcut configuration (Only ig series and MD series support);**
++)))
++1. (((
++**Visual configuration of MQTT docking third-party platform (Only ig series and MD series support);**
++)))
++1. (((
++**8070ig and 8102ig support video player controls.**
++)))
++
++HMI applications
++
++1. Countdown prompt to enter background (Only HMI V2.0 system supports);
++1. Background LAN security monitoring configuration (Only HMI V2.0 system supports);
++1. Background USB flash disk upgrade mirror limit fallback version (Only HMI V2.0 system supports);
++1. 8000ig double network port configuration (Only HMI V2.0 system supports);
++1. Support to modify Ethernet static IP configuration through special registers (Only HMI V2.0 system supports);
++1. User management supports multi languages (Only HMI V2.0 system supports);
++1. 8000ig supports video play (Only HMI V2.0 system supports);
++1. Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports);
++1. Dynamic screensaver (Only HMI V2.0 system supports);
++1. Lua SMS sending (only supported by HM I V2.0 system);
++1. Lua obtains SIM card information (Only HMI V2.0 system supports);
++1. Camera configuration (Only HMI V2.0 system supports);
++1. Support PI8000/PI9000 series update system without deleting project (Only HMI V2.0 system supports);
++1. Backstage supports multi languages switch and language customization (Only HMI V2.0 system supports);
++1. (((
++When switching languages, clean up the screen cache (Only HMI V2.0 system supports);
++)))
++1. (((
++Register HSW1890 triggers to refresh network signal (Only HMI V2.0 system supports);
++)))
++1. (((
++Register HSW1891 controls the cleaning of the screen cache (Only HMI V2.0 system supports);
++)))
++1. (((
++Background stimulates the terminal (Only HMI V2.0 system supports);
++)))
++1. (((
++**Dynamic text (Only HMI V2.0 system supports);**
++)))
++1. (((
++**External keyboard shortcut (Only ig series and MD series support);**
++)))
++1. (((
++**HMIdevice name (Only HMI V2.0 system supports);**
++)))
++1. (((
++**Background supports cloud server switching (Only general 8000 series with V2.0 system, ig series and MD series supports);**
++)))
++1. (((
++**Support remote screen adaptation display of vertical screen project (Only HMI V2.0 system supports);**
++)))
++1. (((
++**Common lua script function of verification algorithms (Only HMI V2.0 system supports);**
++)))
++1. (((
++**INSeries (IN1071, IN1072, IN1073) does not distinguish models and supports mutual projects regardless of models;**
++)))
++
++Driver protocol
++
++1. WECON LX6V EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports);
++1. Rockwell EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports);
++1. OMRON EtherNet/IP (NX/NJ Series) (Tag protocol optimized version) (Only HMI V2.0 system supports);
++1. MODBUS RTU Slave (All Fuction OneBaseAddress) can customize broadcast address;
++1. SMS module can delete all information;
++1. INOVANCE H5U_Easy PLC driver protocol (Serial port);
++1. INOVANCE H5U_Easy free tag protocol drive;
++1. Xinjie XD/XE drive;
++1. Veichi V3 drive;
++1. Shihlin SX6V EtherNet/IP Protocol;
++1. CODESYS V3 drive;
++1. Modbus_Server_IoT_Plat drive;
++1. (((
++MIT Q00H CPU Port PROTOCOL drive;
++)))
++1. (((
++Schneider TM221 drive;
++)))
++1. (((
++Delta_DVP_ModbusRTU drive;
++)))
++1. (((
++INOVANCE H5U_Easy ModbusTCP drive;
++)))
++1. (((
++Siemens S7-xxx Ethernet OP new drive;
++)))
++1. (((
++MODBUS RTU Slave (All Function) protocol retry timeout time factor multiple ToMu;
++)))
++1. (((
++Schneider TM221 drive;
++)))
++
++{{info}}
++**✎Note: The maximum communication number of free tag protocol and CODESYS V3 configuration in models of each series is shown in the following table.**
++{{/info}}
++
++|**Series model**|**Recommended maximum number of free tag protocols**|**Recommended maximum number of CODESYS V3 protocols**
++|8000 Series|4|Configuration is not supported.
++|3000 Series|Configuration is not supported.|Configuration is not supported.
++|9000 Series|Configuration is not supported.|Configuration is not supported.
++|3000i Series|Configuration is not supported.|Configuration is not supported.
++|ie Series (3043ies with network port)|2|Configuration is not supported.
++|ie Series (Other models)|Configuration is not supported.|Configuration is not supported.
++|3000ig Series|4|2
++|8000ig Series|6|2
++|MD3000 Series|4|Configuration is not supported.
++|IN Series|Configuration is not supported.|Configuration is not supported.
++
++(% class="wikigeneratedid" %)
++**New models**
++
++(1). ie Series: 3070ie-H;
++
++(2). IN Series: IN1071, IN1072, IN1073;
++
++(3). MD Series: MD3102;
++
++(4). ig Series: 3070ig-H, 3043ig, 8070ig, 8102ig, 8043ig;
++
  == V8.2.95_D20220928 ==
  * Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio20220928.zip]]
@@ -302,13 +302,13 @@
 . The communication is disconnected and cannot be reconnected after ig series VPN penetrates;
 . Optimize the polling speed of VB trigger script;
--Drive the updated
++Drive the updated
 . The abnormal communication caused by recipe reading;
  Driver Protocol
--1. Add Omron (NX/NJ) free label driver;
++1. Add Omron (NX/NJ) free tag driver;
  **New functions**
@@ -596,9 +596,9 @@
  = **2 Levi2PI** =
--== V4.5.8 ==
++== V4.6.2 ==
--* [[Download Link>>https://ftp.we-con.com.cn/Download/Software/Levi2PI.zip]]
++* [[Download Link>>https://ftp.we-con.com.cn/Download/Software/Levi2PI%20v4.6.2.zip]]
  = **3 HMI Monitor System** =

1717728415376-899.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.2454238480

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.5 KB

Content

Changes for page 3 Software

Summary

Details

Navigation

Table of Contents