Changes for page 3 Software

Last modified by Jett on 2025/03/13 14:13

From 16.3 to 16.2 From 33.1 to 32.1

From version 32.1

edited by Jett
on 2025/01/06 10:37

Change comment: There is no comment for this version

To version 16.3

edited by Mora Zhou
on 2023/10/27 09:38

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 1 removed)
- 1717728415376-899.png

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.2454238480
++XWiki.Mora

Content

@@ -1,194 +1,5 @@
  = **1 PIStudio** =
--== **V9.1.18.24122702** ==
--
--* Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_9.1.18.24122702.zip]]
--
--**Bugs fixed**
--
--1. RE series V-BOX PLC Pass-through sometime can't work properly.
--1. RE series V-BOX data record upload can't work properly.
--1. PI8043ig and PI3041ig recipe object unable to display properly in web side.
--1. When entering the backstage for the first time after the screen is restarted, the first digit of the backstage password is invalid.
--1. PI8043ig project file is too large to the logo is stuck when HMI restarted.
--1. WIFI model can not enable after update the system.
--1. HMI crash and freeze when downloading PLC project.
--1. When the rectangle/arc/circle object is first initialized, a shadow will appears.
--1. The cloud icon in backstage state error.
--1. In off-line simulation.The left lable of Numeric Input/Display object affect natural decimal display.
--1. MQTT tool publish bit address,the length setting is not 1,message error.
--1. MQTT V5 protocol cannot automatically connect after network disconnection.
--1. The cloud management tool cannot log in to non-administrator users normally.
--1. Object lock does not work for bit switch momentary mode.
--1. WIFI is not connected, but IP still exists.
--1. The actual minimum pressing time of the function switch does not match the setting.
--1. RH-WF V-BOX indicator lamp display error.
--1. Data record display object start time setting error.
--1. The camera display object disappear after switching screens.
--1. After using the four arithmetic operations in address mapping, reading the value in read-only mode displays an abnormality.
--1. Object level password does not match the setting.
--1. In offline simulation, the new recipe tool crashes by clicking keyboard letters.
--1. Recipe name changes when switching screens.
--1. PLC program upload fails when PLC Pass-Through.
--1. IDEC MicroSmart Protocol:TC CC register modifying the value of the address results in an error in the value of the next address.
--1. Delta_AS300_TCP Protocol:D.b register cannot modify status.
--1. OPCUA Client:communication error but have no time-out message.
--1. IEC104client:HMI get black screen after downloading this protocol.
--
--**New functions**
--
--PC Software
--
--1. New project properties page.
--1. i/ie/ig/IN/RE/RH series all support screen style.
--1. Download tool support RE,RH series flash light and test network.
--1. New Device management tool.
--1. Software homepage embedded Wecon support center.
--1. Allow configuration preserve network configuration when download the project.
--1. Software online update.
--1. Scada canvas extension, new draft area.
--1. Recipe element support bit address.
--1. OPC UA server.
--1. New X,Y internal registers(RH series).
--1. 3000ig series Limitation of the Ethernet communication protocol up to 32.
--
--HMI Application
--
--1. New recipe object-Recipe Record:Integrated search, add, delete, download, upload, import, export, and switch recipe functions.
--1. New backstage:The background can be exited instead of restarted,New UI,Ethernet download PLC program,USB update support update the system and project at the same time.
--1. Remote backstage.
--1. New system keyboard.
--1. Character Input/Display object support multi line display.
--1. Character Input/Display object support choose data format(UTF-8/GBK/UNICODE).
--1. Numeric Input/Display object support more 64bit data format.
--1. Modification of serial port parameters takes effect immediately.
--1. RE series can be bound to V-NET.
--1. lua script open user permission function interface.
--1. New Multi-link function.
--1. New special registers related to automatic logout of user functionse.
--1. Alarm info support multiple variables.
--1. Min.hold time countdown.
--1. ig-O support Wecon 6V freetags protocol and CODESYS V3 protocol.
--1. (((
--New special registers related to displaying user storage space information.
--)))
--
--Driver protocol
--
--1. OPCUA Client.
--1. Siemens S7-1200/1500 Ethernet FreeTag.
--1. TwinCAT PLC Ethernet.
--1. KEYENCE KV-5000(Ethernet) using bit address in word address.
--
--**New model**
--
--1. RE series:RE-00,RE-00-LA,RE-4G,RE-4G-LA
--1. RH series:RH-WIFI
--1. ig series:PI3101ig,PI8101ig,PI8121ig
--
--(% class="box infomessage" %)
--(((
--**Notice**
--
--1. The new version can not support general series(PI3000,PI8000,PI9000).Please use the old version (Release Build VER:R05R998_V8.4.114_D24061301) to program the general series.
--1. Projects opened with the new version cannot be opened with the old version. Please make sure to back up the project.
--1. After the upgrade, the supported protocols will change. For details, please refer to: [[Limitation of the Ethernet communication protocol - Wecon>>url:https://docs.we-con.com.cn/bin/view/PIStudio/PLC Protocol/Limitation of the Ethernet communication protocol/]]
--1. Cannot roll back the version after upgrading.
--)))
--
--== **V8.4.114_D24061301** ==
--
--* Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_8.4.114.24061301.zip]]
--
--**Bugs fixed**
--
--PC Software
--
--1. When the MQTT sending mode is set a trigger, entering the trigger address directly cannot save．
--1. Arc object property page configuration angle cannot enter 0.
--1. Add the 5V protocol first, and then add the printer's protocol, can't change the protocol of the printer.
--1. The value of the meter and the color of the scale are inconsistent.
--1. After decompile tool open, the software crash.
--1. Off-line emulator run time the pictures of function switch object do not display.
--1. After deleting multiple screens, the software crash.
--1. After copying the local screen successfully, the directly compiled screen objects will be smaller than the modified screen objects.
--1. The same project file can be opened by multiple software at the same time.
--1. Object id duplication.
--1. The bar graph does not use variables, but when compiling, it prompts the variable address error.
--1. Using dynamic recipients, email addresses are not compiled and display recipient errors.
--1. The objects compile with the address error, but there is no note about what the address error is for which objects.
--1. When the circle/ellipse coords are in the negative area, no error message is displayed.
--1. When text library imports excel,the blank space and subsequent data cannot be imported.
--1. The function screen is deleted and then add it again.it cannot be added.
--1. The wrong continuous length when compiling the address of the data record.
--1. The wrong continuous length of lua script.
--1. PI3041ig configuration Ethernet 2 does not take effect.
--1. The wrong coord prompt when the rectangular objects is determined.
--1. The data record storage in project setting is error.
--1. Fix other problems.
--
--HMI Application
--
--1. The function is invalid after the function switch is pressed;
--1. The lua function io.open cannot open files under the u disk and sd card;
--1. The data record configuration data type is a string, the length is two characters, and it will be recorded more than two characters when data is collected record.
--1. The data type of the word switch is BCD code, and the increase and decrease do not follow the rule of the BCD code.
--1. "Database Format Mismatch" error after Lua script modifies table header.
--1. PI3070ig printing part text box printing font is not clear.
--1. In the offline simulation state, the graphics position offset occurs in the project with 1920*1080 resolution when the graphics are drawn by the address control.
--1. drawing when the graphics position offset.
--1. Receiving Data in Lua User Free Protocol 485 _ 2.
--1. Lua initialization uses the we_bas_jump screen function to jump to the screen is invalid, and there is a black screen.
--1. The data record cannot be recorded when the data record group id is 0.
--1. Value input objects check the display natural decimal function is invalid.
--1. To enable address control state text, must set the state sequence number, text content, and trigger settings.
--1. MQTT is published periodically, and changing the value of the address will also publish.
--1. The text on picture has a probability of becoming blurry.
--1. When the reset switch triggers hiding, it cannot automatically reset.
--1. Alarm records and data records are exported to CSV, and the table header does not switch with language switching.
--1. The screen alarm record csv exported using DbToCsvFile has no alarm content.
--1. The group number displayed in the recipe Group number address does not match the ID of the recipe display objects.
--1. When the number of recipe groups is set to 0, the file name address of the index does not change when there are multiple recipe files.
--1. The gallery is too large, causing crash.
--1. Drop down list username can't show multilingual.
--1. V-NET server anomaly causes device disconnection.
--1. The HMI goes off-line due to abnormal dialing of the 4G module.
--1. Recipe selected line ID does not match the ID in the address.
--1. The USB download project time is not updated, and the local time is not synchronized with the computer time.
--1. The keyboard screen cannot be closed normally through we_bas_closescreen function.
--1. The IE series uses calibri fonts and the screen display is in Song style.
--1. After setting floating setting as big-endian,the recipe table is displayed in Little-endian.
--1. Long press the bit switch, and then release the bit switch after entering the static screen saver , and the bit switch cannot be reset.
--1. After the function switch uses object password, the password is invalid after the screen jumps.
--1. PI8150ig makes the font size smaller when using calibri font.
--1. IN series long press upper left corner, upper right corner invalid.
--1. Fix other problems.
--
--Drive
--
--1. DELTA AS300 MODBUS TCP driver operation D.b bit address invalid.
--1. OMRONE5CC driver communication abnormal.
--1. Xunpu printer driver prints pictures abnormally.
--1. Rockwell Ethernet/IP (CompactLogix Series) driver communication exception.
--1. Siemens LOGO drive on-line simulation crash.
--1. Fix other problems.
--
--**New functions**
--
--Driver
--
--1. LS MASTER Protocol driver supports bit address selection of D register.
--1. TECO MP300 MODBUS TCP protocol.
--1. TECO MP300 MODBUS RTU protocol.
--
--**Precautions**
--
--Drive
--
--✎Note: WECON LX6V FreeTag Ethernet will not be maintained in the future, please switch to WECON LX6V EtherNet/IP.
--
--✎Note: WECON LX6V FreeTag Series will not be maintained in the future, please switch to Ethernet WECON LX6V EtherNet/IP
--
  == V8.4.66_D23102001 ==
  * Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio_8.4.66.23102001.zip]]
@@ -431,238 +431,6 @@
  Fix other problems.
  )))
--Drive
--
--1. ShortMessage_Module message group sending timeout;
--1. When using Modbus_RTU_All Ethernet, the communication is reported error;
--1. (((
--OpenCAN drive communication slowly;
--)))
--1. (((
--WECON LX3VP recipe continuous reading fails;
--)))
--1. (((
--WECON LX5V M address write instruction length error;
--)))
--1. (((
--MIT QJ71 MELSEC PROTOCOL communication abnormally;
--)))
--1. (((
--Mitsubishi FX3U Drive Counter negative value display error;
--)))
--1. (((
--OpenCAN drive baud rate set error;
--)))
--1. (((
--Omron CP2E and PI HMI/online stimulation communication timeout;
--)))
--1. (((
--User-defined Protocol single sending cannot be used;
--)))
--1. (((
--Incorrect display of 32-bit signed number in MITSUBISHI FX3U/3G/3SA address CH200;
--)))
--1. (((
--A physical serial port double 485 will time out when communicating at the same time;
--)))
--1. (((
--User-defined Protocol does not display in online simulation;
--)))
--1. (((
--Abnormal communication of HMI with azbil protocol;
--)))
--1. (((
--Siemens Protocol S7300 (with PC Adaptor New) DB address is not available;
--)))
--1. (((
--Modbus_TCP_Master does not reply when sending read instruction;
--)))
--1. (((
--USB printer protocol uses print object; the printing will print black edges;
--)))
--1. (((
--SMS protocol cannot receive and send, Add ClrMsg register to delete all information;
--)))
--1. (((
--MODBUS RTU Slave (All Function) broadcasting station number communication problem. Add BrtCat station number set registers.
--)))
--1. (((
--Siemens 200SMART communication abnormally;
--)))
--1. (((
--Xinjie XDH communication abnormally;
--)))
--1. (((
--Drive customized protocol cache cannot be cleared;
--)))
--1. (((
--Errors in DWORD read/write in INOVANCE H5U_Easy PLC Ethernet Protocol;
--)))
--1. (((
--Parameters such as PI timeout reconnection are not valid;
--)))
--1. (((
--The matching mode of user-defined protocol receiving first and then sending;
--)))
--1. (((
--Fix other problems;
--)))
--
--**New functions**
--
--PC Software
--
--1. Data record db file merge function of DataLogTool (Only HMI V2.0 system supports);
--1. (((
--Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports);
--)))
--1. (((
--8000ig supports that the maximum number of configuring communication connections is 32 (Only HMI V2.0 system supports);
--)))
--1. (((
--Curve object add 8 types of line configuration (Only HMI V2.0 system supports);
--)))
--1. (((
--Ethernet communication supports the selection and settings of network card type (Only HMI V2.0 system supports);
--)))
--1. (((
--Customized name configuration is added for communication port configuration, which can be used in address editing interface and address list interface (Only HMI V2.0 system supports);
--)))
--1. (((
--**Improve compilation speed;**
--)))
--1. (((
--**Function switch right-click selection to jump to the target screen;**
--)))
--1. (((
--**Right-click the object and select jump to image gallery configuration;**
--)))
--1. (((
--**String table configuration;**
--)))
--1. (((
--**External keyboard shortcut configuration (Only ig series and MD series support);**
--)))
--1. (((
--**Visual configuration of MQTT docking third-party platform (Only ig series and MD series support);**
--)))
--1. (((
--**8070ig and 8102ig support video player controls.**
--)))
--
--HMI applications
--
--1. Countdown prompt to enter background (Only HMI V2.0 system supports);
--1. Background LAN security monitoring configuration (Only HMI V2.0 system supports);
--1. Background USB flash disk upgrade mirror limit fallback version (Only HMI V2.0 system supports);
--1. 8000ig double network port configuration (Only HMI V2.0 system supports);
--1. Support to modify Ethernet static IP configuration through special registers (Only HMI V2.0 system supports);
--1. User management supports multi languages (Only HMI V2.0 system supports);
--1. 8000ig supports video play (Only HMI V2.0 system supports);
--1. Text color dynamic configuration of numerical value and text input object (Only HMI V2.0 system supports);
--1. Dynamic screensaver (Only HMI V2.0 system supports);
--1. Lua SMS sending (only supported by HM I V2.0 system);
--1. Lua obtains SIM card information (Only HMI V2.0 system supports);
--1. Camera configuration (Only HMI V2.0 system supports);
--1. Support PI8000/PI9000 series update system without deleting project (Only HMI V2.0 system supports);
--1. Backstage supports multi languages switch and language customization (Only HMI V2.0 system supports);
--1. (((
--When switching languages, clean up the screen cache (Only HMI V2.0 system supports);
--)))
--1. (((
--Register HSW1890 triggers to refresh network signal (Only HMI V2.0 system supports);
--)))
--1. (((
--Register HSW1891 controls the cleaning of the screen cache (Only HMI V2.0 system supports);
--)))
--1. (((
--Background stimulates the terminal (Only HMI V2.0 system supports);
--)))
--1. (((
--**Dynamic text (Only HMI V2.0 system supports);**
--)))
--1. (((
--**External keyboard shortcut (Only ig series and MD series support);**
--)))
--1. (((
--**HMIdevice name (Only HMI V2.0 system supports);**
--)))
--1. (((
--**Background supports cloud server switching (Only general 8000 series with V2.0 system, ig series and MD series supports);**
--)))
--1. (((
--**Support remote screen adaptation display of vertical screen project (Only HMI V2.0 system supports);**
--)))
--1. (((
--**Common lua script function of verification algorithms (Only HMI V2.0 system supports);**
--)))
--1. (((
--**INSeries (IN1071, IN1072, IN1073) does not distinguish models and supports mutual projects regardless of models;**
--)))
--
--Driver protocol
--
--1. WECON LX6V EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports);
--1. Rockwell EtherNet / IP (Tag protocol optimized version) (Only HMI V2.0 system supports);
--1. OMRON EtherNet/IP (NX/NJ Series) (Tag protocol optimized version) (Only HMI V2.0 system supports);
--1. MODBUS RTU Slave (All Fuction OneBaseAddress) can customize broadcast address;
--1. SMS module can delete all information;
--1. INOVANCE H5U_Easy PLC driver protocol (Serial port);
--1. INOVANCE H5U_Easy free tag protocol drive;
--1. Xinjie XD/XE drive;
--1. Veichi V3 drive;
--1. Shihlin SX6V EtherNet/IP Protocol;
--1. CODESYS V3 drive;
--1. Modbus_Server_IoT_Plat drive;
--1. (((
--MIT Q00H CPU Port PROTOCOL drive;
--)))
--1. (((
--Schneider TM221 drive;
--)))
--1. (((
--Delta_DVP_ModbusRTU drive;
--)))
--1. (((
--INOVANCE H5U_Easy ModbusTCP drive;
--)))
--1. (((
--Siemens S7-xxx Ethernet OP new drive;
--)))
--1. (((
--MODBUS RTU Slave (All Function) protocol retry timeout time factor multiple ToMu;
--)))
--1. (((
--Schneider TM221 drive;
--)))
--
--{{info}}
--**✎Note: The maximum communication number of free tag protocol and CODESYS V3 configuration in models of each series is shown in the following table.**
--{{/info}}
--
--|**Series model**|**Recommended maximum number of free tag protocols**|**Recommended maximum number of CODESYS V3 protocols**
--|8000 Series|4|Configuration is not supported.
--|3000 Series|Configuration is not supported.|Configuration is not supported.
--|9000 Series|Configuration is not supported.|Configuration is not supported.
--|3000i Series|Configuration is not supported.|Configuration is not supported.
--|ie Series (3043ies with network port)|2|Configuration is not supported.
--|ie Series (Other models)|Configuration is not supported.|Configuration is not supported.
--|3000ig Series|4|2
--|8000ig Series|6|2
--|MD3000 Series|4|Configuration is not supported.
--|IN Series|Configuration is not supported.|Configuration is not supported.
--
--(% class="wikigeneratedid" %)
--**New models**
--
--(1). ie Series: 3070ie-H;
--
--(2). IN Series: IN1071, IN1072, IN1073;
--
--(3). MD Series: MD3102;
--
--(4). ig Series: 3070ig-H, 3043ig, 8070ig, 8102ig, 8043ig;
--
  == V8.2.95_D20220928 ==
  * Official Website: [[Download Link>>https://ftp.we-con.com.cn/Download/Software/PIStudio20220928.zip]]
@@ -723,13 +723,13 @@
 . The communication is disconnected and cannot be reconnected after ig series VPN penetrates;
 . Optimize the polling speed of VB trigger script;
--Drive the updated
++Drive the updated
 . The abnormal communication caused by recipe reading;
  Driver Protocol
--1. Add Omron (NX/NJ) free tag driver;
++1. Add Omron (NX/NJ) free label driver;
  **New functions**
@@ -1017,9 +1017,9 @@
  = **2 Levi2PI** =
--== V4.6.2 ==
++== V4.5.8 ==
--* [[Download Link>>https://ftp.we-con.com.cn/Download/Software/Levi2PI%20v4.6.2.zip]]
++* [[Download Link>>https://ftp.we-con.com.cn/Download/Software/Levi2PI.zip]]
  = **3 HMI Monitor System** =

1717728415376-899.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.2454238480

Size

...	...	@@ -1,1 +1,0 @@
1		-56.5 KB

Content

Changes for page 3 Software

Summary

Details

Navigation

Table of Contents