Changes for page 3 Software

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -18,43 +18,48 @@
18	18	1. Slow response of alarm record and address monitoring table, and stuck when opening the project;
19	19	1. LREAL data type cannot be read and written;
20	20	1. The overlapping screen cannot be set when the sub-screen is selected in screen;
21		-1. The encoding method options for string type data in Data record;
	21	+1. Software crash caused by too many project tag and alarm points;
	22	+1. The encoding method cannot be selected when recording string data;
22	22	1. Communication failure on Ethernet2 of HMI when using IP address from different Subnets for Ethernet1 and Ethernet2.
23	23	1. The addresses of X and Y are inconsistent in XY trend chart,;
	25	+1. The address monitor is limited to one text address.
24	24	1. Object lock cannot be an index address;
25		-1. Lagging display of camera;
26		-1. Stuck on logo issue during IN, IE series upgrade;
	27	+1. Choppy display from the camera;
	28	+1. Logo display issue during IN, IE series upgrade;
27	27	1. The IN series HMI do not support the mouse style configuration;
28	28	1. Failure to download projects to IN series HMI ;
29	29	1. PDF prompts display abnormal;
30	30	1. CAN port configuration communication error;
31	31	1. When RH device uses 4K resolution, the fonts of message prompt, background, etc. are too small;
32		-1. The issue of translator multi-language;
	34	+1. Fixed:The issue of translator multi-language;
33	33	1. Invalid address mapping;
34	34	1. The advanced configuration effect of device search, device management and cloud management download project not match the expected results;
35		-1. RH-00 communication configuration does not have ETH2 configuration;
	37	+1. RH-00 communication port configuration does not have network port2 configuration ;
36	36	1. The ig model system keyboard is not working;
37		-1. The ig, RH series vertical screen mouse movement and touch optimized;
38		-1. 4.3-inch HMI vertical screen background display effect;
39		-1. Issue of Siemens S7-1200 DBS register reads and writes less than half, need to check the ”Read DWord” option;
40		-1. OPC UA Client reads and writes strings issue, if the new string is shorter than the old one, the end of the old string will be remained;
41		-1. If using too many element in recipe for JUNCAUTO protocol, the address will be clean and overwrite the data in low addresses;
42		-1. Write LX5V bit-in-word;
43		-1. OPC UA Client cannot connect to the server configured with authentication;
44		-1. OPC UA Client cannot reconnect normally after unplugging/plugging the network cable;
	39	+1. Optimized: Remote cloud and pass-through;
	40	+1. Optimized: Ig, RH series vertical screen mouse movement and touch;
	41	+1. Optimization: 4.3-inch HMI vertical screen background display effect;
	42	+1. Fixed:Issue of Siemens S7-1200 DBS register reads and writes less than half, need to check the ”Read Double Bytes”;
	43	+1. The issue of OPCUA client reads and writes strings, if the new string is shorter than the old one, the end of the old string will be remained;
	44	+1. When the recipe in the JUNCAUTO protocol is too large, the address will be clean and overwrite the data in low addresses;
	45	+1. The issue with a bit in the LX5V word;
	46	+1. OPCUA Client cannot connect to the server configured with authentication;
	47	+1. OPCUA Client cannot reconnect normally after unplugging/plugging the network cable;
45	45	1. Changing communication methods in the background is invalid;
46	46	1. Set user permissions on the screen, but the register cannot jump to this screen;
47		-1. The issue of abnormal using indirect screen on sub-screen;
	50	+1. The issue of abnormal using indirect pictures on sub-screen;
48	48	1. Abnormal display of the bar graph ;
49	49	1. The RH series cannot use the CODESYS protocol;
50	50	1. When the simulator's print object is set to screenshot mode, the screen cannot be switched after a screenshot.
51		-1. Operation records do not support text variable insert;
	54	+1. Operation records do not support multi-variable;
52	52	1. Object or font shrinking when moving numeric object;
	56	+1. The issue with quotation marks in recipe data after export/import on the 9000ig HMI;
	57	+1. IN1072 cannot communicate with Siemens s7-200smart;
53	53	1. CODESYS V3 protocol cannot read the Unicode string of LX6C (WSTRING);
54		-1. The issue with the UNION type data in Omron;
	59	+1. The issue with the union in Omron;
55	55	1. Communication failure after the end of VPN pass-through, ;
56	56	1. Communication failure between Keyence KV series protocol and 9000ig series;
57		-1. Gallery size limitation per screen for IN, IE and RH series;
	62	+1. Optimized: Gallery size limit per screen for IN, IE and RH series;
58	58	1. Other issues;
59	59
60	60	(% class="wikigeneratedid" %)