Skip to Content

Wiki source code of Delta

Version 21.1 by Devin Chen on 2023/09/26 14:05
Show last authors
1 = {{id name="HDelta"/}}**Delta** =
2
3 == {{id name="HDVPSeries"/}}**DVP Series** ==
4
5 Supported Series: Delta DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX Controller
6
7 **HMI Settings**
8
9 |=**Item**|=**Settings**|=**Note**
10 |Protocol|DELTA DVP Series|
11 |Connection|RS485|
12 |Baud rate|9600|
13 |Data bit|7|
14 |Parity|Even|
15 |Stop bit|1|
16 |PLC station No.|1~~255|Need to be the same as PLC settings
17
18 **Address List**
19
20 |=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
21 |Bit|X|X|X d|0~~303237|
22 |Bit|Y|Y|Y d|0~~303237|
23 |Bit|M|M|M d|0~~99999|
24 |Bit|T|T|T d|0~~99999|
25 |Bit|C|C|T d|0~~99999|
26 |Bit|S|S|T d|0~~99999|
27 |Word|D|D|D d|0~~99999|
28 |Word|T|T|T d|0~~99999|
29 |Word|C|C|C d|0~~99999|
30
31 **Configure the communication protocol**
32
33 {{id name="Iimage-20220829152327-6.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_de5af5621084c16e.png||alt="image-20220829152327-6.png" height="735" width="616"]]
34
35 {{id name="Iimage-20220829152016-3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_efc2ea365a80a69.png||alt="image-20220829152016-3.png" height="905" width="1038"]]
36
37 **Cable Wiring**
38
39 {{id name="Iimage-20220829152102-5.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_95279b21a0902ff5.png||alt="image-20220829152102-5.png" height="241" width="393"]]
40
41 == {{id name="HDVPModbusTCP"/}}**DVP Modbus TCP** ==
42
43 Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
44
45 **HMI Settings**
46
47 |=**Items**|=**Settings**|=**Note**
48 |Protocol|DELTA DVP Modbus TCP|
49 |Connection|Ethernet|
50 |Port No.|201|Must be the same as the PLC setting
51 |PLC station No.|0|Must be the same as the PLC setting
52
53 **Address List**
54
55 |=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
56 |Bit|X|X|X o|0~~377|
57 |Bit|Y|Y|Y o|0~~377|
58 |Bit|M0|M0|M0 d|0~~1535|
59 |Bit|M1|M1|M1 d|1536~~4095|
60 |Bit|T|T|T d|0~~255|
61 |Bit|C|C|C d|0~~255|
62 |Bit|S|S|S d|0~~1023|
63 |Word|D0|D0|D0 d|0~~4095|
64 |Word|D1|D1|D1 d|4096~~11999|
65 |Word|T|T|T d|0~~255|
66 |Word|C|C|C d|0~~199|
67
68 **Configure the communication protocol**
69
70 {{id name="Iimage-20220829155452-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ade82bcbcffe6d8c.png||alt="image-20220829155452-1.png" height="735" width="616"]]
71
72 {{id name="Iimage-20220829162116-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ce5941843aa16b46.png||alt="image-20220829162116-2.png" height="905" width="1038"]]
73
74 **Cable Wiring**
75
76 {{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
77
78 == {{id name="HAS300MODBUSRTU"/}}**AS Series Serial** ==
79
80 Supported Series: Delta AS200/AS300
81
82 **HMI Settings**
83
84 |**Item**|**Settings**|**Note**
85 |Protocol|DELTA AS300 MODBUS RTU|
86 |Connection|RS485|
87 |Baud rate|9600|
88 |Data bit|8|
89 |Parity|NONE|
90 |Stop bit|1|
91 |PLC station No.|1|
92
93 **Address List**
94
95 |=**Type**|=(% style="width: 319px;" %)**Device registers**|=(% style="width: 259px;" %)**Format**|=**Range**|=**Note**
96 |Bit|(% style="width:319px" %)X|(% style="width:259px" %)Xdd.dd|0~~63.15|Read only
97 |Bit|(% style="width:319px" %)Y|(% style="width:259px" %)Ydd.dd|0~~63.15|
98 |Bit|(% style="width:319px" %)D|(% style="width:259px" %)Dddddd|0~~29999|
99 |Bit|(% style="width:319px" %)M|(% style="width:259px" %)Mdddd|0~~8191|
100 |Bit|(% style="width:319px" %)SM|(% style="width:259px" %)SMdddd|0~~4095|
101 |Bit|(% style="width:319px" %)S|(% style="width:259px" %)Sdddd|0~~2047|
102 |Bit|(% style="width:319px" %)T|(% style="width:259px" %)Tddd|0~~511|
103 |Bit|(% style="width:319px" %)C|(% style="width:259px" %)Cddd|0~~511|
104 |Bit|(% style="width:319px" %)HC|(% style="width:259px" %)HCddd|0~~255|Double Word
105 |Word|(% style="width:319px" %)X|(% style="width:259px" %)Xdd|0~~63|
106 |Word|(% style="width:319px" %)Y|(% style="width:259px" %)Ydd|0~~63|
107 |Word|(% style="width:319px" %)SR|(% style="width:259px" %)SRdddd|0~~2047|Special register
108 |Word|(% style="width:319px" %)D|(% style="width:259px" %)Dddddd|0~~29999|
109 |Word|(% style="width:319px" %)T|(% style="width:259px" %)Tddd|0~~511|
110 |Word|(% style="width:319px" %)C|(% style="width:259px" %)Cddd|0~~511|
111 |Word|(% style="width:319px" %)E|(% style="width:259px" %)Ed|0~~9|
112
113 **Configure the communication protocol**
114
115 Create project
116
117 {{id name="IAsCreateProject.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_b7f7269dc8e83a21.png||alt="AsCreateProject.png" height="729" width="1366"]]
118
119 Open the tool COMMGR, to communicate with PLC, if know the IP, we can directly click Add to input PLC IP. Or search the PLC IP from LAN.
120
121 {{id name="IAScommunicarw.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e7d08035f5930e76.png||alt="AScommunicarw.png" height="533" width="616"]]
122
123 Double click the HWCONFIG to open the communication settings window.
124
125 {{id name="IASHWCONFIG.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e75cc09b89b3b7b1.png||alt="ASHWCONFIG.png" height="728" width="1366"]]
126
127 Expand the Project Tree, open the hardware configuration, double click the PLC icon.
128
129 {{id name="IASHSCONFIGICON.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_daa6b9d7d45cdb0a.png||alt="ASHSCONFIGICON.png" height="702" width="932"]]
130
131 Click COM1 Port Setting, the default Modbus mode is ASCII, need to change to RTU.
132
133 {{id name="IASModbusMode.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_3df2c64600444264.png||alt="ASModbusMode.png" height="702" width="932"]]
134
135 Click Ethernet Port Basic Setting, set the PLC IP and Gateway. Make sure the IP and Gateway is same segment. Then download into PLC.
136
137 {{id name="IASconfigIP.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_da011ceb3ea3e4dc.png||alt="ASconfigIP.png" height="702" width="932"]]
138
139 {{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-1"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="image-20220830094600-1.png" height="38" width="76"]]
140
141 {{id name="Iimage-20220830094657-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d2502d89d0bffd41.png||alt="image-20220830094657-2.png" height="905" width="1038"]]
142
143 **Cable Wiring**
144
145 {{id name="Iimage-20220830141138-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_f8fe0b0ed8eeae70.png||alt="image-20220830141138-1.png" height="202" width="629"]]
146
147 Pin Definition Diagram
148
149 {{id name="Iimage-20220830095131-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a71ae15340c23f6d.png||alt="image-20220830095131-1.png" height="230" width="342"]]
150
151 == {{id name="HAS300MODBUSTCP"/}}**AS Series Ethernet** ==
152
153 **HMI Settings**
154
155 |=**Items**|=**Settings**|=**Note**
156 |Protocol|DELTA AS300 MODBUS TCP|
157 |Connection|Ethernet|
158 |Port No.|502|
159 |Device No.|1|
160 |HMI No.|0|
161
162 **Address List**
163
164 |=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
165 |Bit|X|X|X d|0~~63|
166 |Bit|Y|Y|Y d|0~~63|
167 |Bit|D|D|D d|0~~29999|
168 |Bit|M|M|M d|0~~8191|
169 |Bit|SM|SM|SM d|0~~4095|
170 |Bit|S|S|S h|0~~2047|
171 |Bit|T|T|T d|0~~511|
172 |Bit|C|C|C d|0~~511|
173 |Bit|HC|HC|HC d|0~~255|
174 |Word|X|X|X h|0~~63|
175 |Word|Y|Y|Y d|0~~63|
176 |Word|SR|SR|SR d|0~~2047|
177 |Word|D|D|D d|0~~29999|
178 |Word|T|T|T d|0~~511|
179 |Word|C|C|C h|0~~511|
180 |Word|E|E|E d|0~~9|
181
182 **Configure the communication protocol**
183
184 {{id name="Iimage-20220830140537-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_18ef1d1ef3759c1c.png||alt="image-20220830140537-1.png" height="735" width="616"]]
185
186 {{id name="Iimage-20220830140629-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e2240cfba5d009c9.png||alt="image-20220830140629-2.png" height="905" width="1038"]]
187
188 **PLC Setting**
189
190 1.Open COMMGR ,[Add]→[Driver Name] Driver1→[Connection Setup]→[Type] Ethernet→[Ethernet Card] →[Description] Realtek PCIe GBE Family Controller→[Search] PC and PLC are in
191 the same LAN, click the corresponding PLC IP searched.→[OK]
192
193 (% style="text-align:center" %)
194 [[image:1.3.1.png]]
195
196 2. Open ISPSoft,[Project]→Double click[HWCONFIG]
197
198 (% style="text-align:center" %)
199 [[image:1.3.2.png]]
200
201 PLC Default Parameters:
202 [Device]→[Hardware Configuration]→[CPU(AS332T-A)]→[Hardware Configuration]→[General] →[Ethernet Port Basic Setting]: [IP Address]192.168.40.122, [Subnet Mask]255.255.255.0,[Gateway]
203 192.168.40.1→[Download]
204
205 (% style="text-align:center" %)
206 [[image:1.3.3-.png]]
207
208 (% style="text-align:center" %)
209 [[image:1.3.4.png]]
210
211 **Cable Wiring**
212
213 {{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-2"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]