Limitation of the Ethernet communication protocol

Version 33.1 by Joe on 2024/11/28 18:45

Limitation of the Ethernet communication protocol

The table below shows the maximum number of communications configured for the general protocol, Free Tag Protocol and CodeSys V3 Protocol on each series model.
 (**Only HMI V2.0 System supports Free Tag Protocol and CodeSys V3 Protocol**)

HMI SeriesGeneral ProtocolFreeTags ProtocolCodeSys V3 Protocol
General 3000 Series16N/AN/A
General 8000 Series244N/A
General 9000 Series32N/AN/A
PI3000i Series16N/AN/A
PI3000ie Series
 (PI3043ieS-N)
162N/A
PI3000ie Series
 (other model)
N/AN/AN/A
 PI3070ig-O & PI3102ig-O16N/AN/A
PI3000ig Series
 (except -O models)
1642
PI8000ig Series3262

PIStudio Version Limit Differences for FreeTag protocol

PIStudio Version8.2.95.220928028.4.66.231020018.4.114.24061301
ProtocolWecon LX6V FreeTag*3rd Party Manufacturer FreeTag*Wecon FreeTag Protocol(6C & 6V)*3rd Party Manufacturer FreeTagWecon FreeTag Protocol(6C & 6V)3rd Party Manufacturer FreeTag
PI3043ieS-NYESYESN/AN/AN/AN/A
PI3070ig-O(x)*, PI3102ig-O(x), PI3070ig-OH(x), PI3102ig-OH(x), YESYESN/AN/AN/AN/A
PI3070ig(x)*, PI3102ig(x),  PI3070ig-C(x), PI3102ig-C(x), PI3070ig-CH(x), PI3102ig-CH(x)YESYESYESYESYESYES
PI8000igYESYESYESYESYESYES
Information

✎Note: Since CODESYS V3 was released in version 8.4.66.23102001, only the LX6V FreeTag protocol is available in version 8.2.95.22082802. The Wecon Free Tag protocol specifically refers to the "WECON LX6V FreeTag Ethernet" and "CODESYS V3".
The list of 3rd-party manufacturers' FreeTag protocols is as follows:
1. INOVANCE H5U Ethernet FreeTag
2. OMRON EtherNet/IP (NX/NJ Series)
3. Rockwell CompactLogix Ethenet/IP
4. Rockwell Micro850 Ethernet/IP
5. Siemens S7-1200/S7-1500 Ethenet FreeTag
6. OPC UA Client
7. BECKHOFF TwinCAT

The model suffix (x) means there are optional (G), (W), (AG) model.

FreeTag Protocol Support Limitations on HMI Series

ProtocolRH SeriesRE SeriesPI3000ig SeriesPI8000ig SeriesPI3000ie SeriesPI3000i SeriesIN Series
CODESYS V3YESN/AYESYESN/AN/AN/A
WECON LX6VYESN/AYESYESN/AN/AN/A
INOVANCE H5U FreeTagYESN/AYES(2.0)*YESN/AN/AN/A
OMRON NX/NJYESN/AYES(2.0)*YESN/AN/AN/A
Rockwell CompactLogixYESN/AYES(2.0)*YESN/AN/AN/A
Rockwell Micro850YESN/AYES(2.0)*YESN/AN/AN/A
SiemensS7-1200/S7-1500 FreeTagYESN/AN/AYESN/AN/AN/A
OPC UA ClientYESN/AN/AYESN/AN/AN/A
OPC UA ServerN/AN/AN/AYESN/AN/AN/A
BECKHOFF TwinCATYESN/AN/AYESN/AN/AN/A
Information

✎Note: YES(2.0)* means the 3000ig Series only support 3rd party manufacturer on HMI V2.0 system, but will not available after upgrade into HMI V3.0.

The number of FreeTag Protocol on HMI Series

ProtocolRH SeriesRE SeriesPI3000ig SeriesPI8000ig SeriesPI3000ie SeriesPI3000i SeriesIN Series
CODESYS V32N/A22N/AN/AN/A
WECON LX6V6N/A46N/AN/AN/A
INOVANCE H5U FreeTag6N/A6(2.0)*6N/AN/AN/A
OMRON NX/NJ6N/A6(2.0)*6N/AN/AN/A
Rockwell CompactLogix6N/A6(2.0)*6N/AN/AN/A
Rockwell Micro8506N/A6(2.0)*6N/AN/AN/A
SiemensS7-1200/S7-1500 FreeTag6N/AN/A6N/AN/AN/A
OPC UA Client6N/AN/A6N/AN/AN/A
BECKHOFF TwinCAT6N/AN/A6N/AN/AN/A

Note: The above number is recommended number. The operating speed of HMI will be slow after exceeding the number.