Changes for page Mitsubishi

Last modified by Jett on 2025/01/16 09:26

From 6.1 to 5.1

From version 5.1

edited by Hunter
on 2023/08/24 18:12

Change comment: There is no comment for this version

To version 1.1

edited by Hunter
on 2023/08/24 18:12

Change comment: Changed document syntax from [XWiki 2.1] to [xwiki/2.1].

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 3 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,0 @@
1		-Mitsubishi

Content

@@ -1,603 +1,0 @@
--= {{id name="HMitsubishi"/}}**Mitsubishi** =
--
--== {{id name="HFX1S2C1N2C2NSeries"/}}**FX1S, 1N, 2N Series** ==
--
--Supported Series: Mitsubishi FX1S, FX1N, FX2N series
--
--**HMI Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi FX1S/FX1N/FX2N|
--|Connection|RS422/RS485/RS232|
--|Baud rate|9600~~115200|
--|Data bit|7/8|
--|Parity|EVEN/Odd/None|
--|Stop bit|1/2|
--|PLC station No.|1~~255|
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Cable Wiring**
--
--* **RS485**
--
--{{id name="I12.PLCProtocol_html_d4012bdeb4ce4aae.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ddcfa89a7e788c14.png||alt="12.PLC Protocol_html_d4012bdeb4ce4aae.png" height="244" width="394"]]
--
--{{id name="I12.PLCProtocol_html_4bf57ad8d44eacc4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_64f32195c6a29424.png||alt="12.PLC Protocol_html_4bf57ad8d44eacc4.png" height="244" width="394"]]
--
--* **RS422**
--
--{{id name="I12.PLCProtocol_html_f8a6bebc5792960d.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e27e979a8eaf8f17.png||alt="12.PLC Protocol_html_f8a6bebc5792960d.png" height="253" width="402"]]
--
--**✎Note:** COM3 only available in PI8000/PI9000 series.
--
--== {{id name="HFX3U2F3G2F3GASerial"/}}**FX3U/3G/3GA Serial** ==
--
--**HMI Settings**
--
--|=**Item**|=**Settings**|=**Note**
--|Protocol|Mitsubishi FX3U/3G/3GA|
--|Connection|RS422|
--|Baud rate|9600~~115200|
--|Data bit|7/8|
--|Parity|EVEN/Odd/None|
--|Stop bit|1/2|
--|PLC station No.|1~~255|
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|(% rowspan="7" %)Bit|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="8" %)Word|X|X|Xo|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Configure the communication protocol**
--
--{{id name="Iimage-20220831095222-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_87497ea9be28fa5.png||alt="image-20220831095222-1.png" height="735" width="616"]]
--
--{{id name="Iimage-20220831095743-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_f1214e2436407de.png||alt="image-20220831095743-2.png" height="905" width="1038"]]
--
--**Wiring**
--
--{{id name="Iimage-20220831100314-6.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_feac72c6266d5c9f.png||alt="image-20220831100314-6.png" height="240" width="381"]]
--
--== {{id name="HFXNOPROTOCOL"/}}**FX NOPROTOCOL** ==
--
--Mitsubishi FX3G-RS232-BD
--
--**HMI Settings**
--
--|=**Item**|=**Settings**|=**Note**
--|Protocol|Mitsubishi FX NOPROTOCOL|
--|Connection|RS232|
--|Baud rate|9600|
--|Data bit|7|
--|Parity|EVEN|
--|Stop bit|1|
--|PLC station No.|0|
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|(% rowspan="8" %)Bit|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~99999|
--|S|S|S d|0~~99999|
--|SM|SM|SM d|8000~~9999|
--|Lamp|Lamp|Lamp d|0~~0|
--|(% rowspan="8" %)Word|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|T|T|T d|0~~99999|
--|C|C|C d|0~~199|
--|D|D|D d|0~~7999|
--|S|S|S d|0~~99999|
--|SD|SD|SD d|8000~~9999|
--
--**Configure the communication protocol**
--
--{{id name="I1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_468060edf3e40542.png||alt="1.png" height="706" width="909"]]
--
--{{id name="I2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d58ca6ee4453ebce.png||alt="2.png" height="706" width="909"]]
--
--**Wiring**
--
--{{id name="I3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1717efe8d969a43c.png||alt="3.png" height="246" width="401"]]
--
--== {{id name="HFX3UEthernet"/}}**FX3U Ethernet** ==
--
--Mitsubishi FX3U series PLC
--
--**HMI Settings**
--
--|Items|Settings|Note
--|Protocol|Mitsubishi FX3U Ethernet|
--|Connection|Ethernet|
--|Port No.|5009|Must be the same as the PLC setting
--|PLC station No.|0|
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="7" %)Bit|X|X|X OOO|0~~377|
--|Y|Y|Y OOO|0~~377|
--|M|M|M DDDD|0~~7679|
--|SM|SM|SM DDDD|8000~~8511|
--|S|S|S DDDD|0~~4095|
--|TS|TS|TS DDD|0~~511|
--|CS|CS|CS DDD|0~~255|
--|(% rowspan="5" %)Word|CN|CN|CN DDD|0~~199|
--|TN|TN|TN DDD|0~~511|
--|D|D|D DDDD|0~~7999|
--|SD|SD|SD DDDD|8000~~8511|
--|R|R|R DDDDD|0~~32767|
--
--**Ethernet Module Settings**
--
--FX3U-ENET-L module configuration
-- Set up the FX3U-ENET-L Ethernet module settings as follows.
-- Select the module location, which in this document is Module 0.
--
--{{id name="Iimage-20221115140802-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_949d5d77c1d9cf1e.png||alt="image-20221115140802-1.png" height="573" width="706"]]
--
--Select "Operational setting" to enter the following screen.
--
--The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
--
--{{id name="Iimage-20221115142728-4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_dfbfdd586c855c47.png||alt="image-20221115142728-4.png" height="573" width="706"]]
--
--Select "Open setting" to enter the setting interface, the settings are as follows.
--
--The third item "Protocol" selects TCP, and "Open system" selects MELSOFT connection, which allows the
--
--Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
--
--{{id name="Iimage-20221115142945-5.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7c01ac15090fcc5b.png||alt="image-20221115142945-5.png" height="549" width="706"]]
--
--Click on "transter setup" - "PC side I/F setting", see the following figure.
--
--After setting, the first download must use the programming cable, as shown in the figure; after that, can
--
--use the IP set in the "Ethernet board" to communicate directly with the network cable.
--
--{{id name="Iimage-20221115143341-6.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d6fd9ce3b96f99e2.png||alt="image-20221115143341-6.png" height="426" width="712"]]
--
--Read and write data from the Ethernet module
--
--{{id name="Iimage-20221115143703-7.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_690b3e57b29cfd4b.png||alt="image-20221115143703-7.png" height="549" width="706"]]
--
--Set "Transter setup" to COM communication, and read or write operation as shown below
--
--{{id name="Iimage-20221115143809-8.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_b317253742f7151.png||alt="image-20221115143809-8.png" height="549" width="706"]]
--
--**PLC Settings (GX Works 2)**
--
--Create a blank FX5U project
--
--Find Current Connection in the navigation
--
--{{id name="Iimage-20221115144335-9.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d2a46ba9c005cf38.png||alt="image-20221115144335-9.png" height="422" width="706"]]
--
--Select Connection Channel List
--
--Select Ethernet board communication
--
--{{id name="Iimage-20221115144824-10.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8f49721a3e5b0ef9.png||alt="image-20221115144824-10.png" height="421" width="705"]]
--
--Select Ethernet Module
-- Set the IP address of the PLC
--
--{{id name="Iimage-20221115145228-11.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1e9a9e29a46a1041.png||alt="image-20221115145228-11.png" height="674" width="708"]]
--
--Read or write PLC data, in this document is read
--
--{{id name="Iimage-20221115145553-12.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e3d629103727a423.png||alt="image-20221115145553-12.png" height="424" width="711"]]
--
--{{id name="Iimage-20221115145559-13.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7f29923ebcb670d1.png||alt="image-20221115145559-13.png" height="424" width="711"]]
--
--**HMI Communication Setting**
--
--{{id name="Iimage-20221115150003-14.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_11364c6da9a4fd72.png||alt="image-20221115150003-14.png" height="425" width="712"]]
--
--{{id name="Iimage-20221115150235-15.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4c73e8982af3231.png||alt="image-20221115150235-15.png" height="427" width="713"]]
--
--{{id name="Iimage-20221115145559-13.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7f29923ebcb670d1.png||alt="image-20221115145559-13.png" height="424" width="711"]]
--
--**HMI Communication Setting**
--
--{{id name="Iimage-20221115150003-14.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_11364c6da9a4fd72.png||alt="image-20221115150003-14.png" height="425" width="712"]]
--
--{{id name="Iimage-20221115150235-15.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4c73e8982af3231.png||alt="image-20221115150235-15.png" height="427" width="713"]]
--
--== {{id name="HFX5USerial"/}}**FX5U Serial** ==
--
--Mitsubishi FX5U series PLC
--
--**HMI Settings**
--
--|**Item**|**Settings**|**Note**
--|Protocol|Mitsubishi FX5U|
--|Connection|RS422/RS485|
--|Baud rate|9600|
--|Data bit|7|
--|Parity|Odd|
--|Stop bit|1|
--|PLC station No.|1~~255|Need to be the same as PLC settings
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="15" %)Bit|X|X|X o|0~~303237|
--|Y|Y|Y o|0~~303237|
--|M|M|M d|0~~99999|
--|B|B|B h|0~~7FFF|
--|F|F|F d|0~~32767|
--|SB|SB|SB h|0~~7FFF|
--|TS|TS|TS d|0~~1023|
--|TC|TC|TC d|0~~1023|
--|STS|STS|STS d|0~~1023|
--|STC|STC|STS d|0~~1023|
--|CS|CS|CS d|0~~1023|
--|CC|CC|CC d|0~~1023|
--|SM|SM|SM d|0~~9999|
--|L|L|L d|0~~32767|
--|S|S|S d|0~~4095|
--|(% rowspan="9" %)Word|W|W|W h|0~~3FF|
--|TN|TN|TN d|0~~1023|
--|STN|STN|STN d|0~~1023|
--|CN|CN|CN d|0~~1023|
--|R|R|R d|0~~32767|
--|SW|SW|SW h|0~~7FFF|
--|Z|Z|Z d|0~~23|
--|D|D|D d|0~~7999|
--|SD|SD|SD d|0~~11999|
--
--**PLC Settings (GX Works 3)**
--
--Create a blank FX5U project
--
--Find the 485 serial port module in the system navigation bar and double click to enter the settings.
--
--{{id name="I12.PLCProtocol_html_5c9cb13fac1e6c93.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a2437897f85ae78.png||alt="12.PLC Protocol_html_5c9cb13fac1e6c93.png" height="462" width="200"]]
--
--Select protocol in the setting item, and set parameters.
--
--{{id name="I12.PLCProtocol_html_de942589ca070228.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e13b2569bc879dc9.png||alt="12.PLC Protocol_html_de942589ca070228.png" height="324" width="600"]]
--
--Set station number, and [Message Pattern] (Pattern 1 or Pattern 4)
--
--{{id name="I12.PLCProtocol_html_387ec7d00b5feb59.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7a585c2e05785534.png||alt="12.PLC Protocol_html_387ec7d00b5feb59.png" height="323" width="600"]]
--
--Click the [Apply] button to finish the setting.
--
--Click download and select the items as below, then click [execute] to download the configuration to PLC.
--
--{{id name="I12.PLCProtocol_html_cdef1c5ec8cc2105.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_24ac3c2c904fdd5a.png||alt="12.PLC Protocol_html_cdef1c5ec8cc2105.png" height="434" width="600"]]
--
-- As soon as download is completed, connect PLC with serial port, then configure it in the [Specify Connection Destination Connection].
--
--Done.
--
--**Cable Wiring**
--
--* **RS485**
--
--{{id name="I12.PLCProtocol_html_d4012bdeb4ce4aae.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ddcfa89a7e788c14.png||alt="12.PLC Protocol_html_d4012bdeb4ce4aae.png" height="244" width="394"]]
--
--{{id name="I12.PLCProtocol_html_4bf57ad8d44eacc4.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_64f32195c6a29424.png||alt="12.PLC Protocol_html_4bf57ad8d44eacc4.png" height="244" width="394"]]
--
--* **RS422**
--
--{{id name="I12.PLCProtocol_html_f8a6bebc5792960d.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_e27e979a8eaf8f17.png||alt="12.PLC Protocol_html_f8a6bebc5792960d.png" height="253" width="402"]]
--
--**✎Note:** COM3 only available in PI8000/PI9000 series.
--
--== {{id name="HL02CPUPort"/}}**L02 CPU Port** ==
--
--Mitsubishi L02 series CPU built-in serial port.
--
--**HMI Settings**
--
--|=**Item**|=**Settings**|=**Note**
--|Protocol|Mitsubishi L02 CPU Port|
--|Connection|RS422|
--|Baud rate|115200|
--|Data bit|8|
--|Parity|Odd|
--|Stop bit|1|
--|PLC station No.|1~~255|Need to be the same as PLC settings
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|Bit|X|X|X h|0~~FFFF|
--|Bit|Y|Y|Y h|0~~FFFF|
--|Bit|M|M|M d|0~~9999|
--|Bit|L|L|L d|0~~9999|
--|Bit|F|F|F d|0~~9999|
--|Bit|B|B|B h|0~~FFFF|
--|Bit|V|V|V d|0~~2047|
--|Bit|TC|TC|TC d|0~~9999|
--|Bit|SS|SS|SS d|0~~9999|
--|Bit|SC|SC|SC d|0~~9999|
--|Bit|CS|CS|CS d|0~~9999|
--|Bit|CC|CC|CC d|0~~9999|
--|Bit|SB|SB|SB h|0~~FFFF|
--|Bit|SM|SM|SM d|0~~2047|
--|Bit|STS|STS|STS d|0~~1023|
--|Bit|S|S|S d|0~~9999|
--|Bit|DX|DX|DX h|0~~FFFF|
--|Bit|DY|DY|DY h|0~~FFFF|
--|Bit|TS|TS|TS d|0~~9999|
--|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
--|Word|W|W|W h|0~~FFFF|
--|Word|TN|TN|TN d|0~~99999|
--|Word|SN|SN|SN d|0~~99999|
--|Word|CN|CN|CN d|0~~99999|
--|Word|R|R|R d|0~~99999|
--|Word|SW|SW|SW h|0~~FFFF|
--|Word|Z|Z|Z d|0~~99999|
--|Word|ZR|ZR|ZR h|0~~FFFF|
--|Word|D|D|D d|0~~99999|
--
--**Communication Settings**
--
--{{id name="Iimage-20220831105732-3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d08c69b880471768.png||alt="image-20220831105732-3.png" height="735" width="616"]]
--
--{{id name="Iimage-20220831110004-5.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c6479028a3958c09.png||alt="image-20220831110004-5.png" height="905" width="1038"]]
--
--**Cable Wiring**
--
--{{id name="Iimage-20220831105542-2.png"/}}{{id name="Iimage-20220831105529-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_183dee3a2f9d5a5a.png||alt="image-20220831105542-2.png" height="172" width="226"]] [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_679c6b6b2dc84d90.png||alt="image-20220831105529-1.png" height="228" width="492"]]
--
--Pin Definition Diagram
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FV-BOX2FV-Net2FTraining2F12520Communication2FWebHome2Fimage-20220825160820-4.png3Frev3D1.1"/}}[[image:https://docs.we-con.com.cn/bin/download/V-BOX/V-Net/Training/1%20Communication/WebHome/image-20220825160820-4.png?rev=1.1||alt="image-20220825160820-4.png" height="38" width="76"]]
--
--== {{id name="HL02CPUMELSEC28Ethernet29"/}}**L02 CPU MELSEC(Ethernet)** ==
--
--Mitsubishi Q series CPU built-in Ethernet port.
--
--**HMI Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|MITSUBISHI L02 CPU MELSEC|
--|Connection|Ethernet|
--|Port No.|1025|Must be the same as the PLC setting
--|PLC station No.|0|Must be the same as the PLC setting
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|Bit|X|X|X h|0~~FFFF|
--|Bit|Y|Y|Y h|0~~FFFF|
--|Bit|M|M|M d|0~~9999|
--|Bit|L|L|L d|0~~9999|
--|Bit|F|F|F d|0~~9999|
--|Bit|B|B|B h|0~~FFFF|
--|Bit|V|V|V d|0~~2047|
--|Bit|TC|TC|TC d|0~~9999|
--|Bit|SS|SS|SS d|0~~9999|
--|Bit|SC|SC|SC d|0~~9999|
--|Bit|CS|CS|CS d|0~~9999|
--|Bit|CC|CC|CC d|0~~9999|
--|Bit|SB|SB|SB h|0~~FFFF|
--|Bit|SM|SM|SM d|0~~2047|
--|Bit|STS|STS|STS d|0~~1023|
--|Bit|S|S|S d|0~~9999|
--|Bit|DX|DX|DX h|0~~FFFF|
--|Bit|DY|DY|DY h|0~~FFFF|
--|Bit|TS|TS|TS d|0~~9999|
--|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
--|Word|W|W|W h|0~~FFFF|
--|Word|TN|TN|TN d|0~~99999|
--|Word|SN|SN|SN d|0~~99999|
--|Word|CN|CN|CN d|0~~99999|
--|Word|R|R|R d|0~~99999|
--|Word|SW|SW|SW h|0~~FFFF|
--|Word|Z|Z|Z d|0~~99999|
--|Word|ZR|ZR|ZR h|0~~FFFF|
--|Word|D|D|D d|0~~99999|
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--{{id name="I12.PLCProtocol_html_43b671f18153910d.png-1"/}} [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a98ee09dac36eba3.png||alt="12.PLC Protocol_html_43b671f18153910d.png" height="107" width="405"]]
--
--Set PLC IP in [Device IP] settings;
--
--{{id name="I12.PLCProtocol_html_38189fae42f6caa7.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_376def31824aaed1.png||alt="12.PLC Protocol_html_38189fae42f6caa7.png" height="206" width="600"]]
--
--**PLC Settings (GX Works2 )**
--
--Create a project
--
--Set PLC IP, subnet mask and gateway;
--
--Select [Binary Code] as communication data code;
--
--{{id name="Iimage-20221108202109-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8c67f9236cf3c782.png||alt="image-20221108202109-2.png" height="636" width="732"]]
--
--Set PLC port number, for example 1025
--
--{{id name="I12.PLCProtocol_html_8d0d1a22d388f70b.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4fafc6de7980df7a.png||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
--
--Save settings;
--
--Download project into PLC device;
--
--Restart PLC device;
--
--**Cable Wiring**
--
--{{id name="I12.PLCProtocol_html_2297240b57346b2a.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
--== {{id name="HQJ71C24NMELSEC"/}}**QJ71C24N MELSEC** ==
--
--Mitsubishi QJ71C24N communication module built-in serial port;
--
--**HMI Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|MITSUBISHI QJ71 MELSEC|
--|Connection|422|
--|Baud rate|9600|
--|Data bit|8|
--|Parity|ODD|
--|Stop bit|1|
--|PLC station No.|1~~255|Need to be the same as PLC settings
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="19" %)Bit|X|X|X FFFF|0~~1FFF|
--|Y|Y|Y FFFF|0~~1FFF|
--|M|M|M DDDDD|0~~99999|
--|L|L|L DDDD|0~~8191|
--|F|F|F DDDD|0~~2047|
--|V|V|V DDDD|0~~2047|
--|B|B|B FFFF|0~~1FFF|
--|TS|TS|TS DDDD|0~~2047|
--|TC|TC|TC DDDD|0~~2047|
--|SS|SS|SS DDDD|0~~2047|
--|SC|SC|SC DDDD|0~~2047|
--|CS|CS|CS DDDD|0~~1023|
--|CC|CC|CC DDDD|0~~1023|
--|SB|SB|SB FFF|0~~7FF|
--|S|S|S D|0~~8191|
--|DX|DX|DX FFFF|0~~1FFF|
--|DY|DY|DY FFFF|0~~1FFF|
--|SM_|SM_|SM_ DDDD|8000~~9999|
--|SM|SM|SM DDDD|0~~2047|
--|(% rowspan="10" %)Word|SD|SD|SD DDDD|0~~2047|
--|D|D|D DDDDD|0~~12287|
--|W|W|W FFFF|0~~1FFF|
--|TN|TN|TN DDDD|0~~2047|
--|SN|SN|SN DDDD|0~~2047|
--|CN|CN|CN DDDD|0~~1023|
--|R|R|R DDDDD|0~~32767|
--|SW|SW|SW FFF|0~~7FF|
--|Z|Z|Z D|0~~15|
--|ZR|ZR|ZR FFFFF|0~~FE7FF|
--
--**Communication Settings**
--
--{{id name="Iimage-20221109135738-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_6513d4083293f50e.png||alt="image-20221109135738-1.png" height="574" width="540"]]
--
--{{id name="Iimage-20221109140016-3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4856928ac03ccb79.png||alt="image-20221109140016-3.png" height="706" width="909"]]
--
--Pin Definition Diagram
--
--{{id name="Iimage-20221109140406-4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_708b4368ae664f84.png||alt="image-20221109140406-4.png" height="247" width="397"]]
--
--== {{id name="HQJ71E71MELSEC"/}}**QJ71E71 MELSEC** ==
--
--Mitsubishi QJ71E71 Ethernet communication module;
--
--**HMI Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|MITSUBISHI QJ71E71 MELSEC|
--|Connection|Ethernet|
--|Port No.|1025|Must be the same as the PLC setting
--|PLC station No.|0|Must be the same as the PLC setting
--
--**Address List**
--
--|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
--|(% rowspan="18" %)Bit|X|X|X h|0~~1FFF|
--|Y|Y|Y h|0~~1FFF|
--|M|M|M d|0~~99999|
--|L|L|L d|0~~8191|
--|F|F|F d|0~~2047|
--|B|B|B h|0~~1FFF|
--|V|V|V d|0~~2047|
--|TS|TS|TS d|0~~2047|
--|TC|TC|TC d|0~~2047|
--|SS|SS|SS d|0~~2047|
--|SC|SC|SC d|0~~2047|
--|CS|CS|CS d|0~~1023|
--|CC|CC|CC d|0~~1023|
--|SB|SB|SB h|0~~7FF|
--|S|S|S d|0~~8191|
--|DX|DX|DX h|0~~1FFF|
--|DY|DY|DY h|0~~1FFF|
--|SM|SM|SM d|8000~~9999|
--|(% rowspan="10" %)Word|SD|SD|SD d|0~~2047|
--|D|D|D d|0~~12287|
--|W|W|W h|0~~1FFF|
--|TN|TN|TN d|0~~2047|
--|SN|SN|SN d|0~~2047|
--|CN|CN|CN d|0~~1023|
--|R|R|R d|0~~32767|
--|SW|SW|SW h|0~~7FF|
--|Z|Z|Z d|0~~15|
--|ZR|ZR|ZR h|0~~FE7FF|
--
--**HMI Communication Settings**
--
--1) Enable HMI Ethernet in [Project Settings];
--
--{{id name="I12.PLCProtocol_html_43b671f18153910d.png-2"/}} [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a98ee09dac36eba3.png||alt="12.PLC Protocol_html_43b671f18153910d.png" height="107" width="405"]]
--
--2) Set PLC IP in [Device IP] settings
--
--{{id name="Iimage-20221119164628-1.png"/}};[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a672b85489bc3ccf.png||alt="image-20221119164628-1.png" height="502" width="646"]]
--
--**PLC Settings(GX Works2)**
--
--* Click [Ethernet/CC IE/MELSECNET];
--* Please select [Ethernet] as network type;
--* Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
--* Select [Online] as Mode;
--* {{id name="Iimage-20221119164958-2.png"/}}{{id name="I12.PLCProtocol_html_acd084d845da380e.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_5299cbf3c8268344.png||alt="image-20221119164958-2.png" height="356" width="611"]] [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_cca6d562ae3a78f7.png||alt="12.PLC Protocol_html_acd084d845da380e.png" height="300" width="554"]]
--* Click [Operation setting] to set IP;
--* Select [Binary Code] as [Communication Data Code];
--* {{id name="Iimage-20221119165129-3.png"/}}{{id name="I12.PLCProtocol_html_a972e671d2bb9150.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ad7bac4c325df08d.png||alt="image-20221119165129-3.png" height="381" width="611"]] [[image:xwiki_PIStudio_12.PLC+protocols_WebHome_bbfa45d44f415527.png||alt="12.PLC Protocol_html_a972e671d2bb9150.png" height="304" width="553"]]
--* Click [Open setting]
--* Set protocol: TCP;
--* Set [unpassive] in [Open system];
--* Set [receive] in [Fixed buffer];
--* Set [procedure Exist] in [Fixed buffer communication];
--* Disable [Pairing open];
--* Set [No confirm] in [Existence confirmation];
--* Host station port number: 5009;
--* {{id name="I12.PLCProtocol_html_f2c432006cdd2f9.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_9abc6f2f8ad89136.png||alt="12.PLC Protocol_html_f2c432006cdd2f9.png" height="220" width="553"]] Save settings;
--* {{id name="Iimage-20221119165342-4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_143120787717f1e3.png||alt="image-20221119165342-4.png" height="387" width="620"]]
--* Download project into PLC and restart it
--
--**Cable Wiring**
--
--{{id name="I12.PLCProtocol_html_2297240b57346b2a.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]

xwiki_PIStudio_12.PLC+protocols_WebHome_1e9a9e29a46a1041.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-34.1 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_7f29923ebcb670d1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-106.2 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_dfbfdd586c855c47.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-18.7 KB

Content

Changes for page Mitsubishi

Summary

Details

Navigation

Table of Contents