Changes for page Omron

Last modified by Jett on 2024/10/23 20:42

From 16.1 to 15.1

From version 15.1

edited by Hunter
on 2023/08/24 18:11

Change comment: There is no comment for this version

To version 1.1

edited by Hunter
on 2023/08/24 18:11

Change comment: Changed document syntax from [XWiki 2.1] to [xwiki/2.1].

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 13 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,0 @@
1		-Omron

Content

@@ -1,425 +1,0 @@
--= {{id name="HOmron"/}}**Omron** =
--
--== {{id name="HCJTCPFINSEthemet"/}}**CJ TCP FINS Ethemet** ==
--
--Supported device:CJ series, CJ1W-EIP21
--
--**HMI Settings**
--
--|=**Items**|=**Settings**|=**Note**
--|Protocol|OMRON CJ TCP FINS Ethemet|
--|Connection|Ethernet|
--|Port No.|9600|
--|Device No.|0|
--|HMI No.|0|
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|Bit|CIO|CIO|CIO d|0~~99999|
--|Bit|W|W|W d|0~~99999|
--|Bit|D|D|D d|0~~99999|
--|Bit|H|H|H d|0~~99999|
--|Bit|A|A|A d|0~~99999|
--|Bit|T|T|T h|0~~99999|
--|Bit|CF|CF|CF d|0~~99999|
--|Bit|FF|FF|FF d|0~~99999|
--|Bit|C|C|C d|0~~99999|
--|Bit|EM0|EM0|EM0 d|0~~99999|
--|Bit|EM1|EM1|EM1 d|0~~99999|
--|Bit|EM2|EM2|EM2 d|0~~99999|
--|Bit|EM3|EM3|EM3 d|0~~99999|
--|Bit|EM4|EM4|EM4 d|0~~99999|
--|Bit|EM5|EM5|EM5 h|0~~99999|
--|Bit|EM6|EM6|EM6 d|0~~99999|
--|Bit|EM7|EM7|EM7 d|0~~99999|
--|Bit|EM8|EM8|EM8 d|0~~99999|
--|Bit|EM9|EM9|EM9 d|0~~99999|
--|Bit|EMA|EMA|EMA d|0~~99999|
--|Bit|EMB|EMB|EMB d|0~~99999|
--|Bit|EMC|EMC|EMC d|0~~99999|
--|Bit|Lamp|Lamp|Lamp d|0~~0|
--|Word|CIO|CIO|CIO d|0~~99999|
--|Word|W|W|W d|0~~99999|
--|Word|D|D|D d|0~~99999|
--|Word|H|H|H d|0~~99999|
--|Word|A|A|A d|0~~99999|
--|Word|T|T|T h|0~~99999|
--|Word|CF|CF|CF d|0~~99999|
--|Word|FF|FF|FF d|0~~99999|
--|Word|C|C|C d|0~~99999|
--|Word|EM0|EM0|EM0 d|0~~99999|
--|Word|EM1|EM1|EM1 d|0~~99999|
--|Word|EM2|EM2|EM2 d|0~~99999|
--|Word|EM3|EM3|EM3 d|0~~99999|
--|Word|EM4|EM4|EM4 d|0~~99999|
--|Word|EM5|EM5|EM5 h|0~~99999|
--|Word|EM6|EM6|EM6 d|0~~99999|
--|Word|EM7|EM7|EM7 d|0~~99999|
--|Word|EM8|EM8|EM8 d|0~~99999|
--|Word|EM9|EM9|EM9 d|0~~99999|
--|Word|EMA|EMA|EMA d|0~~99999|
--|Word|EMB|EMB|EMB d|0~~99999|
--|Word|EMC|EMC|EMC d|0~~99999|
--|Word|IR|IR|IR d|0~~99999|
--|Word|DR|DR|DR d|0~~99999|
--
--**Configure the communication protocol**
--
--{{id name="Iimage-20220830143348-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_95df6576665b7885.png||alt="image-20220830143348-1.png" height="735" width="616"]]
--
--{{id name="Iimage-20220830143511-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d00a6eb441a5efea.png||alt="image-20220830143511-2.png" height="905" width="1038"]]
--
--**Configure CJ1W-EIP21 connect with HMI**
--
--{{id name="IftEVGvAprh.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_111d091c99a042ec.png||alt="ftEVGvAprh.png" height="574" width="540"]]
--
--Select TCP_Client_2N
--
--{{id name="IRURXWcgyCd.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_42d153488e9793ba.png||alt="RURXWcgyCd.png" height="706" width="909"]]
--
--**Cable Wiring**
--
--Pin Definition Diagram
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-3"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
--== {{id name="HCS128CP1E2FCP1H29"/}}**CS1(CP1E/CP1H)** ==
--
--Supported device: OMRON CS1(CP1E/CP1H)
--
--**HMI Settings**
--
--|=**Items**|=**Settings**|=**Note**
--|Protocol|OMRON CS1(CP1E/CP1H)|
--|Connection|RS232 (9600, 2, 7, EVEN)|
--|Port No.|None|
--|PLC station No.|0|
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
--|Bit|CIO|CIO|CIO d|0~~99999|
--|Bit|W|W|W d|0~~99999|
--|Bit|D|D|D d|0~~99999|
--|Bit|H|H|H d|0~~99999|
--|Bit|A|A|A d|0~~99999|
--|Bit|TF|T|T h|0~~99999|
--|Bit|CF|CF|CF d|0~~99999|
--|Bit|T|FF|FF d|0~~99999|
--|Bit|C|C|C d|0~~99999|
--|Bit|EM0|EM0|EM0 d|0~~99999|
--|Bit|EM1|EM1|EM1 d|0~~99999|
--|Bit|EM2|EM2|EM2 d|0~~99999|
--|Bit|EM3|EM3|EM3 d|0~~99999|
--|Bit|EM4|EM4|EM4 d|0~~99999|
--|Bit|EM5|EM5|EM5 h|0~~99999|
--|Bit|EM6|EM6|EM6 d|0~~99999|
--|Bit|EM7|EM7|EM7 d|0~~99999|
--|Bit|EM8|EM8|EM8 d|0~~99999|
--|Bit|EM9|EM9|EM9 d|0~~99999|
--|Bit|EMA|EMA|EMA d|0~~99999|
--|Bit|EMB|EMB|EMB d|0~~99999|
--|Bit|EMC|EMC|EMC d|0~~99999|
--|Word|CIO|CIO|CIO d|0~~99999|
--|Word|W|W|W d|0~~99999|
--|Word|D|D|D d|0~~99999|
--|Word|H|H|H d|0~~99999|
--|Word|A|A|A d|0~~99999|
--|Word|T|T|T h|0~~99999|
--|Word|CIO|CF|CF d|0~~99999|
--|Word|C|C|C d|0~~99999|
--|Word|EM0|EM0|EM0 d|0~~99999|
--|Word|EM1|EM1|EM1 d|0~~99999|
--|Word|EM2|EM2|EM2 d|0~~99999|
--|Word|EM3|EM3|EM3 d|0~~99999|
--|Word|EM4|EM4|EM4 d|0~~99999|
--|Word|EM5|EM5|EM5 h|0~~99999|
--|Word|EM6|EM6|EM6 d|0~~99999|
--|Word|EM7|EM7|EM7 d|0~~99999|
--|Word|EM8|EM8|EM8 d|0~~99999|
--|Word|EM9|EM9|EM9 d|0~~99999|
--|Word|EMA|EMA|EMA d|0~~99999|
--|Word|EMB|EMB|EMB d|0~~99999|
--|Word|EMC|EMC|EMC d|0~~99999|
--|Word|IR|IR|IR d|0~~99999|
--|Word|DR|DR|DR d|0~~99999|
--
--**Configure the communication protocol**
--
--{{id name="Iimage-20220902153118-1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4acef6476c6f9de3.png||alt="image-20220902153118-1.png" height="735" width="616"]]
--
--{{id name="Iimage-20220902151322-2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4f9620139b8a44b3.png||alt="image-20220902151322-2.png" height="905" width="1038"]]
--
--{{id name="cke_bm_27437S"/}}** PLC Settings(CX-Programmer)**
--
--Open cx-programmer, create a new PLC project or open the project that has been created.
-- Create new project： [File]→[New]→[Device Type]CP1E→[settings]→[General]→[CPU Type]N30→[OK]→[OK].
--
--{{id name="I1.25DE57A0B65B05EFAD.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_aa70463d933c7549.png||alt="1.2 工程新建D.png" height="660" width="1134"]]
--
--PLC Default Parameters:[Settings]→[Built-in RS232C Port]→[Communication Settings]→[Standard]9600,1,7,2,E means:[Baud rate] 9600, [Data bits]7, [Stop bits] 2,[Parity] EVEN→[Unit Number]0 →[Mode]Host Link(Defaut).
--
--{{id name="I1.34E3253E353C26570768467E5770B-914D7F6ED.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_84484fbbb00ca61.png||alt="1.3 串口参数的查看-配置D.png" height="660" width="1134"]]
--
--**Cable Wiring**
--
--{{id name="I56FE72473.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4c5480a409965d39.png||alt="image-20220902153949-2.png" height="508" width="2014"]]
--
--Pin Definition Diagram
--
--{{id name="I3.1.263A553E3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ad6138e6812c2253.png||alt="image-20220902154056-3.png" height="235" width="332"]]
--
--== {{id name="HEC55Protocol"/}}**EC55 Protocol** ==
--
--Supported device: EC55 temperature instrument
--
--**1）HMI Settings**
--
--|**Items**|**Settings**|**Note**
--|Protocol|Omron EC55|
--|Connection|RS485 (9600, 2, 7, EVEN)|
--|Port No.|None|
--|PLC station No.|0|
--
--**2）Address List**
--
--|**Type**|**Register**|**Device range**|**HMI range**|**Function**
--|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
--|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
--|C3|0-CD(Hex)|0-205|Set Read/Write parameter for area 1
--|(% rowspan="6" %)Word|80|0-13(Hex)|0-19|Set read only parameter in area 0
--|81|0-4D(Hex)|0-77|Set Read/Write parameter in area 0
--|83|0-CD(Hex)|0-205|Set Read/Write parameter in area 1
--|CP|-|0-6|Read controller intrinsic property
--|CS|-|0-2|Read controller states
--|CA|-|0-17|Action command
--
--**3）Device Settings**
--
--Omron E5CC PLC configuration
--
--After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
--
--{{id name="I12.PLCProtocol_html_3d95e093792ba98a.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ca4d99a0d2ffe097.png||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
--
--According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
--
--{{id name="I12.PLCProtocol_html_be583aa69dd6cf4c.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_984474debc119fab.png||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
--
--**✎Note:** The communication settings for HMI should be consistent with this setting.
--
--**Cable Wiring**
--
--{{id name="I12.PLCProtocol_html_5e9a81a14106da9e.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_7b2556c42d43a768.png||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
--
--{{id name="I12.PLCProtocol_html_1897d92be6948d58.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c6d16b5adff76549.png||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
--
--**✎Note:**
--
--* COM3 only available in PI8000/PI9000 series.
--* CA address could not support continuous writing function；
--* Because of CP address intrinsic property: read control intrinsic property, so please place the character input part in use. Set address with CP0 and character length 10, used to display controller type. And place a number input part, set address with CP5 (cache size). Do not place other CP type address without CP0 in screen, otherwise CP type address is invalid
--* When set value into read & write address, it is necessary to switch the temperature instrument meter to the corresponding interface according to the menu of the instrument where the address locates, so that the value could be written, otherwise, the value could not be written; When the communication write setting of the instrument is turned off, the writing function is invalid. Writing function could be opened by using the 00 address of the CA register, which write 01 value.
--* When continuous writing of a value to a read-write address, please make sure all continuous writing address could be written. Otherwise, if one of these addresses could not be written, then all continuous writing commands will fail.
--* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
--* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
--* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
--* {{id name="I12.PLCProtocol_html_d428cad280fdefb3.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_f434f58797d3c0da.png||alt="12.PLC Protocol_html_d428cad280fdefb3.png" height="276" width="347"]] Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
--
--== {{id name="HNXEtherNet2FIP"/}}**NX EtherNet/IP** ==
--
--Supported series: Omron NX/NJ series
--
--**HMI Setting**
--
--|**Items**|**Settings**|**Note**
--|Protocol|Omron NX Ethernet/IP|
--|Connection|Ethernet|
--|Port No.|44818|
--|PLC station No.|1|
--
--**Instruction**
--
--1) In Sysmac Studio, please select [Publish Only] for [Network Publish] when setting address tag.
--
--2) When [Do not publish] is selected for a tag, different import methods may lead to different results. When import tags by [Get Tags from Device], the tag will be eliminated. If [Import tags] is selected, the tags will be imported, but the communication will not succeed.
--
--{{id name="I12.PLCProtocol_html_4156caf6f116c570.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1275dbbb73675c45.png||alt="12.PLC Protocol_html_4156caf6f116c570.png" height="277" width="600"]]
--
--**Export labels from Sysmac Studio**
--
--Launch Sysmac Studio, under Global Variables create the address labels, and thenselect [Tools] -> [Export Global Variables];
--
--{{id name="I12.PLCProtocol_html_26f91dee66c723e9.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4d41889d12980317.png||alt="12.PLC Protocol_html_26f91dee66c723e9.png" height="276" width="600"]]
--
--Launch PIStudio, in [Communication] Settings add Omron NX Ethernet/IP protocol;
--
--Click [Label manage];
--
--{{id name="I12.PLCProtocol_html_cd38d2d0c5187f6b.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c02902d35021dbd.png||alt="12.PLC Protocol_html_cd38d2d0c5187f6b.png" height="276" width="600"]]
--
--Click [Import labels] and then select the file exported in step 1;
--
--{{id name="I12.PLCProtocol_html_52bd5da678bef9b4.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_31ee4b3995e48a09.png||alt="12.PLC Protocol_html_52bd5da678bef9b4.png" height="403" width="600"]]
--
--The Import Status field shows the result, click [OK] to finish importing address labels;
--
--{{id name="I12.PLCProtocol_html_7f0465a589b98912.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_2e9eb22f4eb0faef.png||alt="12.PLC Protocol_html_7f0465a589b98912.png" height="291" width="600"]]
--
--**Communication Settings**
--
--Enable HMI Ethernet in [Project Settings];
--
--{{id name="I12.PLCProtocol_html_43b671f18153910d.png-4"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a98ee09dac36eba3.png||alt="12.PLC Protocol_html_43b671f18153910d.png" height="107" width="405"]]
--
--Set PLC IP in [Device IP] settings;
--
--{{id name="I12.PLCProtocol_html_437cb087b36b5784.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_3b29b2c9873ab9cc.png||alt="12.PLC Protocol_html_437cb087b36b5784.png" height="330" width="600"]]
--
--{{id name="I12.PLCProtocol_html_60ef71528a99abf5.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_c45114a482fa38f6.png||alt="12.PLC Protocol_html_60ef71528a99abf5.png" height="188" width="554"]]
--
--**Cable Wiring**
--
--{{id name="Ihttps:2F2Fdocs.we-con.com.cn2Fbin2Fdownload2FPIStudio2F12.PLC2520protocols2FWebHome2F12.PLC2520Protocol_html_2297240b57346b2a.png3Fwidth3D40126height3D17026rev3D1.1-4"/}}[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
--== {{id name="HCV2FCJ1M2FCS1H"/}}**CV/CJ1M/CS1H** ==
--
--**HMI Setting:**
--
--|=**Parameters**|=**Recommended**
--|=**PLC type**|OMRON CV/CJ1M/CS1H
--|=**PLC I/F**|RS232/RS485
--|=**Baud rate**|9600
--|=**Data bits**|7
--|=**Parity**|Even
--|=**Stop bits**|2
--|=**PLC sta. no.**|0
--
--**PLC Setting:**
--
--Open cx-programmer, create a new PLC project or open the project that has been created.
-- Create new project： [File]→[New]→[Device Type]CJ2M→[settings]→[General]→[CPU Type]CPU31→[OK]→[OK].
--
--{{id name="I1.265B05EFA5DE57A0B.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png||alt="1.2 新建工程.png" height="660" width="1134"]]
--
--PLC Default Parameters:[Settings]→[Serial Port]→[Communication Settings]→[Standard]9600,1,7,2,E means:[Baud rate] 9600, [Data bits]7, [Stop bits] 2,[Parity] EVEN→[Unit Number]0 →[Mode]Host Link.
-- Note:The serial port parameters should be set depending on field requirements
--
--{{id name="I1.34E3253E353C26570914D7F6E.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_d4a08b7e4dfac0bd.png||alt="1.3串口参数配置.png" height="660" width="1134"]]
--
--**Device Address:**
--
--|=**Bit/Word**|=**Device type**|=**Format**|=**Range**|=**Memo**
--|=B|CIO|DDDDDdd|0 ~~65535.15|I/O and Internal Relay
--|=B|W|DDDDDdd|0 ~~65535.15|Hold Relay
--|=B|D|DDDDDdd|0 ~~65535.15|Link Relay
--|=B|H|DDDDDdd|0 ~~65535.15|
--|=B|A|DDDDDdd|0 ~~65535.15|
--|=B|TF|DDDDD|0 ~~ 99999|
--|=B|CF|DDDDD|0 ~~ 99999|Auxiliary Relay
--|=B|T|DDDDDdd|0 ~~65535.15|
--|=B|C|DDDDDdd|0 ~~65535.15|
--|=B|EM0|DDDDDdd|0 ~~ 99999.15|
--|=B|EM1|DDDDDdd|0 ~~ 99999.15|
--|=B|EM2|DDDDDdd|0 ~~ 99999.15|
--|=B|EM3|DDDDDdd|0 ~~ 99999.15|
--|=B|EM4|DDDDDdd|0 ~~ 99999.15|
--|=B|EM5|DDDDDdd|0 ~~ 99999.15|
--|=B|EM6|DDDDDdd|0 ~~ 99999.15|
--|=B|EM7|DDDDDdd|0 ~~ 99999.15|
--|=B|EM8|DDDDDdd|0 ~~ 99999.15|
--|=B|EM9|DDDDDdd|0 ~~ 99999.15|
--|=B|EMA|DDDDDdd|0 ~~ 99999.15|
--|=B|EMB|DDDDDdd|0 ~~ 99999.15|
--|=B|EMC|DDDDDdd|0 ~~ 99999.15|
--|=B|Lamp|D|0~~0|
--
--|=**Bit/Word**|=**Device type**|=**Format**|=**Range**
--|=W|W|DDDDD|0 ~~ 99999
--|=W|D|DDDDD|0 ~~ 99999
--|=W|H|DDDDD|0 ~~ 99999
--|=W|A|DDDDD|0 ~~ 99999
--|=W|T|DDDDD|0 ~~ 99999
--|=W|C|DDDDD|0 ~~ 99999
--|=W|CIO|DDDDD|0 ~~ 99999
--|=W|EM0|DDDDD|0 ~~ 99999
--|=W|EM1|DDDDD|0 ~~ 99999
--|=W|EM2|DDDDD|0 ~~ 99999
--|=W|EM3|DDDDD|0 ~~ 99999
--|=W|EM4|DDDDD|0 ~~ 99999
--|=W|EM5|DDDDD|0 ~~ 99999
--|=W|EM6|DDDDD|0 ~~ 99999
--|=W|EM7|DDDDD|0 ~~ 99999
--|=W|EM8|DDDDD|0 ~~ 99999
--|=W|EM9|DDDDD|0 ~~ 99999
--|=W|EMA|DDDDD|0 ~~ 99999
--|=W|EMB|DDDDD|0 ~~ 99999
--|=W|EMC|DDDDD|0 ~~ 99999
--|=W|IR|DDDDD|0 ~~ 99999
--|=W|DR|DDDDD|0 ~~ 99999
--
--**Wiring Diagram:**
--
--**RS-485**
--
--{{id name="I3.1.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_a94192ee427e053b.png||alt="3.1.png" height="186" width="546"]]
--
--Pin Definition Diagram
--
--{{id name="I3.2.png"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_4da7b3277467c9a6.png||alt="3.2.png" height="408" width="593"]]
--
--**RS-232**
--
--CPU Port (CPM2A,CQM1/1H,C200H/HS/ALPHA series)
--
--Communication Module:
--
--CPM1-CIF01 adapter (for CPM1/CPM1A/CPM2A series, CQM1/CQM1H series) CPM1H-SCB41 communication module (for CQM1H-CPU51/61)
--
--The serial port pin assignments may vary between HMI models, please click the following link for more information.
--
--{{id name="Iimage-20220914115848-1.jpeg"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_138658736ae39b8.jpg||alt="image-20220914115848-1.jpeg" height="499" width="610"]]
--
--== {{id name="HOMRONHOSTLINK"/}}**OMRON HOSTLINK** ==
--
--Supported series: Omron C200HE series
--
--**HMI Settings(recommended)**
--
--|=Item|=Recommended
--|=Protocol|OMRON HOSTLINK
--|=Connection|RS232
--|=Baud rate|9600
--|=Stop bits|2
--|=Data bits|7
--|=Parity|EVEN
--|=PLC Station No.|0
--|=HMI Station No.|0
--
--**Address List**
--
--|=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**
--|Bit|IR|IR|IR d|0~~99999
--|Bit|LR|LR|LR d|0~~99999
--|Bit|HR|HR|HR d|0~~99999
--|Bit|AR|AR|AR d|0~~99999
--|Bit|TIMB|TIMB|TIMB d|0~~99999
--|Bit|CNTB|CNTB|CNTB d|0~~99999
--|Bit|TIM|TIM|TIM d|0~~99999
--|Bit|DM|DM|DM d|0~~99999
--|Bit|CNT|CNT|CNT d|0~~99999
--|Bit|WR|WR|WR d|0~~99999
--|Bit|LAMP|LAMP|LAMP d|0~~0
--|Word|IR|IR|IR d|0~~99999
--|Word|LR|LR|LR d|0~~99999
--|Word|HR|HR|HR d|0~~99999
--|Word|AR|AR|AR d|0~~99999
--|Word|TIM|TIM|TIM d|0~~99999
--|Word|DM|DM|DM d|0~~99999
--|Word|CNT|CNT|CNT d|0~~99999
--|Word|WR|WR|WR d|0~~99999
--
--**Cable Wiring**
--
--{{id name="I3.1.263A553E3.png-1"/}}[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ad6138e6812c2253.png||alt="3.1.2 接口.png" height="240" width="339"]]

xwiki_PIStudio_12.PLC+protocols_WebHome_138658736ae39b8.jpg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-75.5 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_1edc9bf9e8c98170.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-54.3 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_2e9eb22f4eb0faef.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-53.0 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_3b29b2c9873ab9cc.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-190.9 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_4c5480a409965d39.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-865.1 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_4d41889d12980317.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-107.3 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_4da7b3277467c9a6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-960.3 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_7b2556c42d43a768.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-26.1 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_84484fbbb00ca61.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-70.0 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_a98ee09dac36eba3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-3.1 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_ad6138e6812c2253.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-21.9 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_c6d16b5adff76549.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-25.9 KB

Content

xwiki_PIStudio_12.PLC+protocols_WebHome_ca4d99a0d2ffe097.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Hunter

Size

...	...	@@ -1,1 +1,0 @@
1		-63.8 KB

Content

Changes for page Omron

Summary

Details

Navigation

Table of Contents