Skip to Content

Changes for page 12 Clock operation

Last modified by Mora Zhou on 2023/11/21 17:27
From version 1.6
edited by Joey
on 2022/06/09 15:42
Change comment: (Autosaved)
To version 1.7
edited by Joey
on 2022/06/09 15:47
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -919,7 +919,7 @@
919 919  
920 920  • The measurement stops when the current value reaches the 16-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+1.
921 921  
922 -✎**Note**
922 +✎**Note:**
923 923  
924 924  • The device specified in (d1) occupies 2 points. Be careful not to overlap with the device used for machine control.
925 925  
... ... @@ -932,15 +932,14 @@
932 932  |4086H|When writing the specified device range exceeds the corresponding device range
933 933  |4084H|When the value of (s) is negative
934 934  
935 -
936 -
937 937  **Example**
938 938  
939 -[[image:07-5 Basic instructions_html_7570f8c392470a9f.png]]
937 +(% style="text-align:center" %)
938 +[[image:07-5 Basic instructions_html_7570f8c392470a9f.png||height="45" width="320"]]
940 940  
941 941  When M0 = ON, the duration of the state is accumulated, the time is recorded in D0, and the seconds less than 1 hour are recorded in D1. When the accumulated time of D0 reaches 98 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K98), the accumulated timing will continue and the reading will continue to increase; the current time value D0 reaches the maximum value of 32767 hours and D1 reaches 3599 seconds, the timing measurement will stop. The current time values D0 and D1 are cleared to 0.
942 942  
943 -{{id name="_Toc8523"/}}{{id name="_Toc9364"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DHOUR/Hour measuring 32 bits**
942 +== **DHOUR/Hour measuring 32 bits** ==
944 944  
945 945  **DHOUR(P)**
946 946  
... ... @@ -952,9 +952,7 @@
952 952  
953 953  |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
954 954  |(s)|(((
955 -The time when the alarm (d2) is turned ON
956 -
957 -(set by one hour)
954 +The time when the alarm (d2) is turned ON (set by one hour)
958 958  )))|0 to 2147483647|Signed BIN 32 bit|ANY32
959 959  |(d1)|Device that stores the current value of measurement (specified data register for power failure retention)|-|Unsigned BIN 32 bit|(((
960 960  ANY32_ARRAY
... ... @@ -965,19 +965,15 @@
965 965  
966 966  **Device used**
967 967  
968 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
969 -**Offset**
970 -
971 -**modification**
965 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="18" %)**Devices**|(((
966 +**Offset modification**
972 972  )))|(((
973 -**Pulse**
974 -
975 -**extension**
968 +**Pulse extension**
976 976  )))
977 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
978 -|(% rowspan="3" %)DHOUR|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●| |●|●
979 -|Parameter 2| | | | | | | | | | | | | | | | |●|●|●| | | | | |●|●
980 -|Parameter 3| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
970 +|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**[D]**|**XXP**
971 +|(% rowspan="3" %)DHOUR|Parameter 1| | | | | |●|●|●|●|●|●|●|●|●|●|●|●|●|●|●
972 +|Parameter 2| | | | | | | | | | | |●|●|●| | | | |●|●
973 +|Parameter 3|●|●|●|●|●| | | | | | | | | | | | | |●|●
981 981  
982 982  **Features**
983 983  
... ... @@ -999,7 +999,7 @@
999 999  
1000 1000  • The measurement stops when the current value reaches the 32-bit maximum. To continue the measurement, clear the current value of (d1) to (d1)+2.
1001 1001  
1002 -✎**Note**
995 +✎**Note:**
1003 1003  
1004 1004  • The device specified in (d1) occupies 3 points. Be careful not to overlap with the device used for machine control.
1005 1005  
... ... @@ -1012,17 +1012,16 @@
1012 1012  |4086H|When writing the specified device range exceeds the corresponding device range
1013 1013  |4084H|When the value of (s) is negative
1014 1014  
1015 -
1016 -
1017 1017  **Example**
1018 1018  
1019 -[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png]]
1010 +(% style="text-align:center" %)
1011 +[[image:07-5 Basic instructions_html_3f1ef5ecc835de30.png||height="43" width="448"]]
1020 1020  
1021 1021  When M0=ON, the duration of this state is accumulated, the time is recorded in D1, D0, and the seconds less than 1 hour are recorded in D2. When the accumulated time of D1, D0 reaches 1000 hours, the Y0 output state is ON. When the timing conditions are met, after reaching the specified value (K1000), the accumulated timing will continue, and the reading will continue to increase; the current time values D1 and D0 reach the maximum value of 2147483647 hours, and when D2 reaches 3599 seconds, the timing measurement will stop and the timing should be restarted. The current time values D0, D1, and D2 must be cleared to 0.
1022 1022  
1023 -**{{id name="_Toc11629"/}}STOH/16-bit data conversion of time data (second → hour, minute, second)**
1015 +== **STOH/16-bit data conversion of time data (second → hour, minute, second)** ==
1024 1024  
1025 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **STOH(P)**
1017 +**STOH(P)**
1026 1026  
1027 1027  Convert the second 16-bit data stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
1028 1028  
... ... @@ -1031,39 +1031,35 @@
1031 1031  **Content, range and data type**
1032 1032  
1033 1033  |**Parameter**|**Content**|**Range**|**Data type**|**Data type (label)**
1034 -|(s)|{{id name="OLE_LINK353"/}}The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16
1026 +|(s)|The device start number that stores the clock data before conversion|0 to 32767|Signed BIN 16 bit|ANY16
1035 1035  |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|(((
1036 -ANY16_ARRAY
1037 -
1038 -(number of elements: 3)
1028 +ANY16_ARRAY (number of elements: 3)
1039 1039  )))
1040 1040  
1041 1041  **Device used**
1042 1042  
1043 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
1044 -**Offset**
1045 -
1046 -**modification**
1033 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
1034 +**Offset modification**
1047 1047  )))|(((
1048 -**Pulse**
1049 -
1050 -**extension**
1036 +**Pulse extension**
1051 1051  )))
1052 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
1053 -|(% rowspan="2" %)STOH|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
1054 -|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
1038 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
1039 +|(% rowspan="2" %)STOH|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
1040 +|Parameter 2| |●|●|●|●|●|●|●|●|●|●
1055 1055  
1056 1056  **Features**
1057 1057  
1058 1058  Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
1059 1059  
1060 -[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png]]
1046 +(% style="text-align:center" %)
1047 +[[image:07-5 Basic instructions_html_1f5f3f1d80af2a34.png||height="110" width="550"]]
1061 1061  
1062 1062  **Example**
1063 1063  
1064 1064  When 29,011 seconds are specified in (s)
1065 1065  
1066 -[[image:07-5 Basic instructions_html_682516cbf773f515.png]]
1053 +(% style="text-align:center" %)
1054 +[[image:07-5 Basic instructions_html_682516cbf773f515.png||height="163" width="550"]]
1067 1067  
1068 1068  **Error code**
1069 1069  
... ... @@ -1074,17 +1074,19 @@
1074 1074  
1075 1075  **Example**
1076 1076  
1077 -[[image:07-5 Basic instructions_html_e783349d57adf7d2.png]]
1065 +(% style="text-align:center" %)
1066 +[[image:07-5 Basic instructions_html_e783349d57adf7d2.png||height="47" width="350"]]
1078 1078  
1079 1079  Set D0 seconds to 12537
1080 1080  
1081 1081  The hour, minute and second of D10 after the M0 coil is turned on are
1082 1082  
1083 -[[image:07-5 Basic instructions_html_d3c33949e8684891.png]]
1072 +(% style="text-align:center" %)
1073 +[[image:07-5 Basic instructions_html_d3c33949e8684891.png||height="52" width="645"]]
1084 1084  
1085 -{{id name="_Toc10764"/}}{{id name="_Toc30243"/}}**DSTOH/32-bit data conversion of time data (second → hour, minute, second)**
1075 +== **DSTOH/32-bit data conversion of time data (second → hour, minute, second)** ==
1086 1086  
1087 -[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **DSTOH(P)**
1077 +**DSTOH(P)**
1088 1088  
1089 1089  Convert the second 32-bit data of second stored in the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
1090 1090  
... ... @@ -1095,37 +1095,33 @@
1095 1095  |**Parameter**|**Content**|**Range**|**Data type**|**Data     type (label)**
1096 1096  |(s)|The device start number that stores the clock data before conversion|0 to 117964799|Signed BIN 32 bit|ANY32
1097 1097  |(d)|The device start number that stores the converted clock data|-|Signed BIN 16 bit|(((
1098 -ANY16_ARRAY
1099 -
1100 -(number of elements: 3)
1088 +ANY16_ARRAY (number of elements: 3)
1101 1101  )))
1102 1102  
1103 1103  **Device used**
1104 1104  
1105 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
1106 -**Offset**
1107 -
1108 -**modification**
1093 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="9" %)**Devices**|(((
1094 +**Offset modification**
1109 1109  )))|(((
1110 -**Pulse**
1111 -
1112 -**extension**
1096 +**Pulse extension**
1113 1113  )))
1114 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
1115 -|(% rowspan="2" %)DSTOH|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | | | | |●|●
1116 -|Parameter 2| | | | | | | | | | | |●|●|●|●|●|●|●|●| | | | | |●|●
1098 +|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**[D]**|**XXP**
1099 +|(% rowspan="2" %)DSTOH|Parameter 1|●|●|●|●|●|●|●|●|●|●|●
1100 +|Parameter 2| |●|●|●|●|●|●|●|●|●|●
1117 1117  
1118 1118  **Features**
1119 1119  
1120 1120  Convert the second data stored after the device number specified in (s) into hour, minute, and second, and store the conversion result in the device specified in (d) and later.
1121 1121  
1122 -[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png]]
1106 +(% style="text-align:center" %)
1107 +[[image:07-5 Basic instructions_html_cbf13fc3d10fbe61.png||height="99" width="600"]]
1123 1123  
1124 1124  **Example**
1125 1125  
1126 1126  When 45,325 seconds is specified in (s)
1127 1127  
1128 -[[image:07-5 Basic instructions_html_d6045506b13275a0.png]]
1113 +(% style="text-align:center" %)
1114 +[[image:07-5 Basic instructions_html_d6045506b13275a0.png||height="135" width="600"]]
1129 1129  
1130 1130  **Error code**
1131 1131  
... ... @@ -1136,15 +1136,17 @@
1136 1136  
1137 1137  **Example**
1138 1138  
1139 -[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png]]
1125 +(% style="text-align:center" %)
1126 +[[image:07-5 Basic instructions_html_e7dd49d953db6da4.png||height="39" width="316"]]
1140 1140  
1141 1141  Set D0 seconds to 2152537
1142 1142  
1143 1143  The hour, minute and second of D10 after the M0 coil is turned on are
1144 1144  
1145 -[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png]]
1132 +(% style="text-align:center" %)
1133 +[[image:07-5 Basic instructions_html_10d57bde1ac0a218.png||height="52" width="661"]]
1146 1146  
1147 -{{id name="_Toc2937"/}}{{id name="_Toc24209"/}}[[image:07-5 Basic instructions_html_11b3991e89e21efc.gif]] **TCMP/Clock data comparison**
1135 +== **TCMP/Clock data comparison** ==
1148 1148  
1149 1149  **TCMP(P)**
1150 1150  
... ... @@ -1163,21 +1163,17 @@
1163 1163  
1164 1164  **Device used**
1165 1165  
1166 -|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="24" %)**Devices**|(((
1167 -**Offset**
1168 -
1169 -**modification**
1154 +|(% rowspan="2" %)**Instruction**|(% rowspan="2" %)**Parameter**|(% colspan="17" %)**Devices**|(((
1155 +**Offset modification**
1170 1170  )))|(((
1171 -**Pulse**
1172 -
1173 -**extension**
1157 +**Pulse extension**
1174 1174  )))
1175 -|**X**|**Y**|**M**|**S**|**SM**|**T(bit)**|**C(bit)**|**LC(bit)**|**HSC(bit)**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**LC**|**HSC**|**K**|**H**|**E**|**[D]**|**XXP**
1176 -|(% rowspan="5" %)TCMP|Parameter 1| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
1177 -|Parameter 2| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
1178 -|Parameter 3| | | | | | | | | | |●|●|●|●|●|●|●|●|●| | |●|●| |●|●
1179 -|Parameter 4| | | | | | | | | | | | | | |●|●|●|●|●| | | | | |●|●
1180 -|Parameter 5| |●|●|●|●| | | | |●| | | | | | | | | | | | | | |●|●
1159 +|**Y**|**M**|**S**|**SM**|**D.b**|**KnX**|**KnY**|**KnM**|**KnS**|**T**|**C**|**D**|**R**|**SD**|**K**|**H**|**E**|**[D]**|**XXP**
1160 +|(% rowspan="5" %)TCMP|Parameter 1| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
1161 +|Parameter 2| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
1162 +|Parameter 3| | | | | |●|●|●|●|●|●|●|●|●|●|●| |●|●
1163 +|Parameter 4| | | | | | | | | |●|●|●|●|●| | | |●|●
1164 +|Parameter 5|●|●|●|●|●| | | | | | | | | | | | |●|●
1181 1181  
1182 1182  **Features**
1183 1183