Skip to Content

Changes for page 09 Electronic cam

Last modified by Devin Chen on 2025/01/09 11:57
From version 12.1
edited by Devin Chen
on 2024/06/21 14:04
Change comment: There is no comment for this version
To version 9.1
edited by Mora Zhou
on 2023/11/21 16:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.DevinChen
1 +XWiki.Mora
Content
... ... @@ -34,7 +34,7 @@
34 34  **extension**
35 35  )))
36 36  |=**Y**|=**M**|=**S**|=**D.b**|=**D**|=**R**|=**LC**|=**HSC**|=**K**|=**H**|=**[D]**|=**XXP**
37 -|=(% rowspan="5" %)DEGEAR|Parameter 1| | | | | | |●|●| | | |
37 +|=(% rowspan="5" %)DECAM|Parameter 1| | | | | | |●|●| | | |
38 38  |Parameter 2| | | | |●|●| | | | | |
39 39  |Parameter 3| | | | |●|●| | |●|●| |
40 40  |Parameter 4|●| | | | | | | | | | |
... ... @@ -42,7 +42,7 @@
42 42  
43 43  **Features**
44 44  
45 -•When the instruction is turned on, the PLC obtains the number of pulses of the master axis (s1) according to the set response time (s3), calculates the average frequency within the response time, and calculates the output of the driven axis according to the set gear ratio Frequency and output pulse number, and output pulse (d1) and direction (d2). When the frequency of the driven axis is greater than the set maximum frequency, it will output according to the set maximum frequency.
45 +•When the instruction is turned on, the PLC obtains the number of pulses of the master axis (s1) according to the set response time (s2), calculates the average frequency within the response time, and calculates the output of the driven axis according to the set gear ratio Frequency and output pulse number, and output pulse (d1) and direction (d2). When the frequency of the driven axis is greater than the set maximum frequency, it will output according to the set maximum frequency.
46 46  
47 47  •When the master axis (s1) uses the high-speed counter (HSC), the PLC internally obtains the number of external input pulses. Modifying the value of the HSC counter does not affect the judgment of the input pulse.
48 48  
... ... @@ -458,9 +458,9 @@
458 458  
459 459  K2: Customize the designated key point to generate a table
460 460  
461 -K100: Generate rotary saw curve
461 +K100: Generate flying shear curve
462 462  
463 -K101: Generate flying saw curve
463 +K101: Generate chase curve
464 464  
465 465  D0~-~-The first address of cam parameters, allowable devices: D, R
466 466