02 Product Information

Version 36.1 by Stone Wu on 2022/08/30 10:06

Servo drives

Model naming

image-20220611113720-1.jpeg

 Figure 2-1 Servo drive model

Figure 2-2 (VD2A) and Figure 2-3 (VD2B) show the exterior and nameplate of the VD2 series absolute value servo drive.

Figure 2-4 shows the exterior and nameplate of the VD2F series absolute value servo drive.

image-20220611113747-1.jpeg

Figure 2-2 Exterior and nameplate of VD2A servo drive

image-20220611113753-2.jpeg

Figure 2-3 Exterior and nameplate of VD2B servo drive

image-20220611113800-3.jpeg

Figure 2-4 Exterior and nameplate of VD2F servo drive

Composition

image-20220611113807-4.jpeg

Figure 2-5 Composition of VD2A servo drive

image-20220704154526-2.jpeg

Figure 2-6 Composition of VD2B servo drive

image-20220704160513-1.jpeg

Figure 2-7 Composition of VD2F servo drive

3_html_4b8f9126cfc3a494.png

Figure 2-8 Short connection of braking resistor

Specification

The specification of VD2 series servo drive is shown in Table 2-1 below.

Electrical

specification

Servo drive model

VD2A and VD2B servo driveVD2F servo drive
Power supply

Under 750W: Use single-phase 200V to 240V, AC 50/60Hz power supply;

1.0kW to 2.6kW could use single-phase AC 220V or three-phase AC 220V ;

It is recommended to use three-phase 220VAC power supply.

Note:

  • VD2-XXXTA1G is not recommended to work in industrial three-phase voltages of 440V and above.
  • For 380V operating voltage, the fluctuation range is 15%
  • For 400V operating voltage, the fluctuation range is 10%

Single-phase 220V, -10% to 10%,

50/60Hz

Control power supply (✎Note)Single-phase AC 200V to 240V, 50/60Hz. 
Braking methodBuilt-in braking resistor, and external braking resistor could be connected.

Table 2-1 Servo drive electrical specifications

Note: Only VD2B drive support independent power supply for control power supply, and VD2A and VD2F drives do not require a separate control power supply.

Servo motors

Model naming

image-20220705100027-1.jpeg

 Figure 2-9 Servo motor naming

image-20220611113846-8.jpeg

Figure 2-10 Servo motor nameplate

Composition

image-20220611113853-9.jpeg

Figure 2-11 Motor composition of 40, 60 and 80 flange

image-20220611113858-10.jpeg

Figure 2-12 Motor composition of 110 and 130 flange

Specification

Wecon motor model

Motor

code

Flange size

Rated power

(KW)

Rated torque

(N.m)

Voltage

(V)

Rated speed

(rpm)

Encoder typeBrake
WE130M-10025S-A1FA0911301.04.0220250017-bit single turn absolute magneticNo
WE130M-15025S-A1GA1111301.56.0220250017-bit single turn absolute magneticYes
WE130M-26025S-C1FC1911302.610220250017-bit multi turn absolute magneticNo
WE80M-12030S-C1GC231801.24.0220300017-bit multi turn absolute magneticYes
WE110M-18030S-D2GD1311101.86.0220300023-bit multi turn absolute opticalYes
WE130M-23015S-D2FD1611302.315.0220150023-bit multi turn absolute opticalNo

Table 2-1 Wecon Motor Specifications

Note: Only part of the motor models are displayed, please refer to the “Model Selection Manual” for details.