Skip to Content

3 V-NET Client

Version 2.4 by Hunter on 2023/01/07 10:20

1 Login page

V-NET Login.png

Language switch

Switch the display language of the software through the first drop-down list. Currently, there are two languages: Simplified Chinese, English.

Server selection

Users can switch servers connected to on the software through the second drop-down list.

User login

  • Enter the correct account password to log in successfully
  • If the same account is in differentPCLogin on the different device at the same time, the account logged on the first device will be forced to log off
  • The view account does not have permission to use the device pass-through function on the home page

Remember password

  • If check this option, after entering the correct password and log in successfully, V-NET Client software would remember the password
  • Users can select remembered account and password to log in directly through the inputbox drop-down list without repeatedly entering the password

Offline mode

Users can jump directly to the homepage without entering the account password by clicking Offline-mode. Only some functions are worked in offline mode. Please refer to the corresponding function modules in the following specific contents.

2 Offline mode

V-NET Offline.png

In offline mode, only some functions are available without login, like the above screenshot shows: The Display and Device Pass-through are disabled. To use the non-offline mode function, please close the V-NET Client, and restart to login account.

3 Display

V-NET homepage.png

After logging into the software, jump to the V-NET homepage by default.

New layout.png

The Pass-through tab is no longer displayed in the main interface. But integrated into the software "Device Pass-through" function. To use the corresponding function, please refer to following chapter"Device Pass-through".

4 Device Configuration

DeviceConfiguration.png

Connect method

  • USB direct connection
  • Ethernet cable in LAN

Scan Segment.png

  • When the inputbox is not entered and directly click the magnifer icon, the current segment is scanned accroding to the PC IP's segment.
  • When the inputbox is entered and click magnifer icon, the current segment is scanned according to the input IP.

Configure network

Network Config.png

  • After V-Box is selected, configure the network for the current device
  • Upload is for uploads the network configuration of the current devic

  • After downloaded, the current device will connect to the corresponding server according to downloaded configuration

Test network

Get the network status of the current device, see whether V-Box can ping server successfully.

Update Firmware

Compare the firmware version carried by the software with the firmware version running by the device, if the firmware version of the V-NET Client software is higher than the firmware version of the device(V-Box), choose whether to upgrade the firmware of the device.

Flash light

Let the lights of the V-Box start flashing quickly for several seconds, which is convenient for positioning where is the V-Box.

Get machine code

Get the machine code of the current connected device and copy it to the clipboard.

Update time

According to the current PC UTC time, to calibrate time of V-Box, but this would not change the time zone of V-Box.

Clear

Clear the operation log in the Operation reminder