Delta

Version 15.1 by Theodore Xu on 2023/10/10 11:09

DVP serial

Supoort Series: DELTA DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX 

V-BOX Settings

ItemsSettingsNote
ProtocolDELTA DVP PROTOCOL 
ConnectionRS232 
Baud Rate9600 
Stop Bit1 
Data Bit7 
ParityEVEN 
Device No.1 

Address List

TypeDevice registersHMI registersFormatRangeNote
BitXXX d0~303237 
BitYYY d0~303237 
BitMMM d0~99999 
BitTTT d0~99999 
BitCCT d0~99999 
BitSST d0~99999 
WordDDD d0~99999 
WordTTT d0~99999 
WordCCC d0~99999 

Wiring Diagram

Delta DVP PROTOCOLSerial232.png

DVP Ethernet

Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller

V-BOX Settings

ItemsSettingsNote
ProtocolDELTA DVP Modbus TCP 
ConnectionEthernet 
Port No.502Must be the same as the PLC setting
PLC station No.0Must be the same as the PLC setting

image-20220831160010-4.png

Address List 

TypeDevice registersVBox registersFormatRangeNote
BitXXX OOO0~377 
BitYYY OOO0~377 
BitM0M0M0DDDD0~1535 
BitM1M1M1DDDD1536~4096 
BitTTTDDD0~255 
BitCCCDDD0~255 
BitSSSDDDD0~1023 
WordD0D0D0DDDD0~4095 
WordD1D1D1DDDD4096~11999 
WordTTTDDD0~255 
WordCCCDDD0~199 
Double WordHCHCHCDDD200~255 

PLC Setting:

1. Create new project in Delta WPL Soft, and click Setting to open the communication settings:

DVPEthernetWPLSoft2.png

2. Set up the communication type and PLC IP:

DVPEthernetSetup.png

3. Click OK and save the settings. Then click Communication on toolbar, then click Transfer Setup to open new window:

DVPEthernetTransfer.png

4. Select Communication Mode as PC => PLC to download or select PC <=PLC to upload:

DVPEthernetPLCtoPC.png

5. Click Auto-Search Ethernet Module to find the PLC on the same LAN network:

DVPEthernetAutoSearch.png

V-BOX Setting:

Set the same IP address according to the setting from WPL Soft:

DVPEthernetVNETPortocol.png

AS Series Serial

Supported Series: Delta AS200/AS300

V-BOX Settings

ItemSettingsNote
ProtocolDELTA AS300 MODBUS RTU 
ConnectionRS485 
Baud rate9600 
Data bit8 
ParityNONE 
Stop bit1 
PLC station No.1 

Address List

TypeDevice registersFormatRangeNote
BitXXdd.dd0~63.15Read only
YYdd.dd0~63.15 
DDddddd0~29999 
MMdddd0~8191 
SMSMdddd0~4095 
SSdddd0~2047 
TTddd0~511 
CCddd0~511 
HCHCddd0~255Double Word
WordXXdd0~63 
YYdd0~63 
SRSRdddd0~2047Special register
DDddddd0~29999 
TTddd0~511 
CCddd0~511 
EEd0~9 

PLC Settings

Create project

台达1.png

Open the tool COMMGR, to communicate with PLC, if know the IP, we can directly click Add to input PLC IP. Or search the PLC IP from LAN.

1696906027584-350.png

Double click the HWCONFIG to open the communication settings window. 

台达3.png

Expand the Project Tree, open the hardware configuration, double click the PLC icon.

台达4.png

Click COM1 Port Setting, the default Modbus mode is ASCII, need to change to RTU.

台达5.png

Click Ethernet Port Basic Setting, set the PLC IP and Gateway. Make sure the IP and Gateway is same segment. Then download into PLC.

台达6.png

Cable Wiring

Please refer to HMI

台达接线1.png

Pin Definition Diagram

台达接线2.png

AS Series Ethernet

ItemsSettingsNote
ProtocolDELTA AS300 MODBUS TCP 
ConnectionEthernet 
Port No.502 
Device No.1 
HMI No.0 

Address List

TypeDevice registersHMI registersFormatRangeNote
BitXXX d0~63 
BitYYY d0~63 
BitDDD d0~29999 
BitMMM d0~8191 
BitSMSMSM d0~4095 
BitSSS h0~2047 
BitTTT d0~511 
BitCCC d0~511 
BitHCHCHC d0~255 
WordXXX h0~63 
WordYYY d0~63 
WordSRSRSR d0~2047 
WordDDD d0~29999 
WordTTT d0~511 
WordCCC h0~511 
WordEEE d0~9 

Cable Wiring

Figure

image-20220831155101-1.png image-20220831160055-5.png

Pin Definition Diagram

image-20220831155157-3.png