Skip to Content

Wiki source code of Delta

Version 18.1 by Theodore Xu on 2023/10/10 11:25
Show last authors
1 == (% id="cke_bm_111267S" style="display:none" %)** **(%%)**DVP serial** ==
2
3 Supoort Series: DELTA DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX
4
5 **V-BOX Settings**
6
7 |=**Items**|=**Settings**|=**Note**
8 |Protocol|DELTA DVP PROTOCOL|
9 |Connection|RS232|
10 |Baud Rate|9600|
11 |Stop Bit|1|
12 |Data Bit|7|
13 |Parity|EVEN|
14 |Device No.|1|
15
16 **Address List**
17
18 |=**Type**|=**Device registers**|=**HMI registers**|=**Format**|=**Range**|=**Note**
19 |Bit|X|X|X d|0~~303237|
20 |Bit|Y|Y|Y d|0~~303237|
21 |Bit|M|M|M d|0~~99999|
22 |Bit|T|T|T d|0~~99999|
23 |Bit|C|C|T d|0~~99999|
24 |Bit|S|S|T d|0~~99999|
25 |Word|D|D|D d|0~~99999|
26 |Word|T|T|T d|0~~99999|
27 |Word|C|C|C d|0~~99999|
28
29 **Wiring Diagram**
30
31 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_96f8e9b105b4268c.png||alt="Delta DVP PROTOCOLSerial232.png" height="247" width="400"]]
32
33 == **DVP Ethernet** ==
34
35 Supported Series: Delta DVP ES2/EX2/SS2/SA2/SX2/SE Controller
36
37 **V-BOX Settings**
38
39 |=**Items**|=**Settings**|=**Note**
40 |Protocol|DELTA DVP Modbus TCP|
41 |Connection|Ethernet|
42 |Port No.|502|Must be the same as the PLC setting
43 |PLC station No.|0|Must be the same as the PLC setting
44
45 (% style="text-align:center" %)
46 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_514e38138de7059.png||alt="DVPEthernetVNETPortocol.png" height="493" width="729"]]
47
48 **Address List **
49
50 |=**Type**|=**Device registers**|=**VBox registers**|=**Format**|=**Range**|=**Note**
51 |Bit|X|X|X OOO|0~~377|
52 |Bit|Y|Y|Y OOO|0~~377|
53 |Bit|M0|M0|M0DDDD|0~~1535|
54 |Bit|M1|M1|M1DDDD|1536~~4096|
55 |Bit|T|T|TDDD|0~~255|
56 |Bit|C|C|CDDD|0~~255|
57 |Bit|S|S|SDDDD|0~~1023|
58 |Word|D0|D0|D0DDDD|0~~4095|
59 |Word|D1|D1|D1DDDD|4096~~11999|
60 |Word|T|T|TDDD|0~~255|
61 |Word|C|C|CDDD|0~~199|
62 |Double Word|HC|HC|HCDDD|200~~255|
63
64 **PLC Setting:**
65
66 ~1. Create new project in Delta WPL Soft, and click Setting to open the communication settings:
67
68 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c5e594a6b73bdd68.png||alt="DVPEthernetWPLSoft2.png" height="727" width="1366"]]
69
70 2. Set up the communication type and PLC IP:
71
72 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_92343d448762200c.png||alt="DVPEthernetSetup.png" height="592" width="346"]]
73
74 3. Click OK and save the settings. Then click Communication on toolbar, then click Transfer Setup to open new window:
75
76 {{id name="IDVPEthernetTransfer.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_a24e318f1e5f0839.png||alt="DVPEthernetTransfer.png" height="726" width="1366"]]
77
78 4. Select Communication Mode as PC => PLC to download or select PC <=PLC to upload:
79
80 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ae301f5422be2294.png||alt="DVPEthernetPLCtoPC.png" height="303" width="308"]]
81
82 5. Click Auto-Search Ethernet Module to find the PLC on the same LAN network:
83
84 {{id name="IDVPEthernetAutoSearch.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_e2c32050bbe425bc.png||alt="DVPEthernetAutoSearch.png" height="723" width="1366"]]
85
86
87 == **AS Series Serial** ==
88
89 Supported Series: Delta AS200/AS300
90
91 **V-BOX Settings**
92
93 |**Item**|**Settings**|**Note**
94 |Protocol|DELTA AS300 MODBUS RTU|
95 |Connection|RS485|
96 |Baud rate|9600|
97 |Data bit|8|
98 |Parity|NONE|
99 |Stop bit|1|
100 |PLC station No.|1|
101
102 **Address List**
103
104 |=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
105 |(% colspan="1" rowspan="9" %)Bit|X|Xdd.dd|0~~63.15|Read only
106 |Y|Ydd.dd|0~~63.15|
107 |D|Dddddd|0~~29999|
108 |M|Mdddd|0~~8191|
109 |SM|SMdddd|0~~4095|
110 |S|Sdddd|0~~2047|
111 |T|Tddd|0~~511|
112 |C|Cddd|0~~511|
113 |HC|HCddd|0~~255|Double Word
114 |(% colspan="1" rowspan="7" %)Word|X|Xdd|0~~63|
115 |Y|Ydd|0~~63|
116 |SR|SRdddd|0~~2047|Special register
117 |D|Dddddd|0~~29999|
118 |T|Tddd|0~~511|
119 |C|Cddd|0~~511|
120 |E|Ed|0~~9|
121
122 **PLC Settings**
123
124 Create project
125
126 (% style="text-align:center" %)
127 [[image:台达1.png]]
128
129 Open the tool COMMGR, to communicate with PLC, if know the IP, we can directly click Add to input PLC IP. Or search the PLC IP from LAN.
130
131 (% style="text-align:center" %)
132 [[image:1696906027584-350.png]]
133
134 Double click the HWCONFIG to open the communication settings window.
135
136 (% style="text-align:center" %)
137 [[image:台达3.png]]
138
139 Expand the Project Tree, open the hardware configuration, double click the PLC icon.
140
141 (% style="text-align:center" %)
142 [[image:台达4.png]]
143
144 Click COM1 Port Setting, the default Modbus mode is ASCII, need to change to RTU.
145
146 (% style="text-align:center" %)
147 [[image:台达5.png]]
148
149
150 Click Ethernet Port Basic Setting, set the PLC IP and Gateway. Make sure the IP and Gateway is same segment. Then download into PLC.
151
152 (% style="text-align:center" %)
153 [[image:台达6.png]]
154
155 **Cable Wiring**
156
157 (% id="cke_bm_36592S" style="display:none" %) (%%)Pin Definition Diagram
158
159 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_daa33fcae616e61c.png||alt="image-20220831155157-3.png" height="181" width="320"]]
160
161 == **AS Series Ethernet** ==
162
163 |=**Items**|=**Settings**|=**Note**
164 |Protocol|DELTA AS300 MODBUS TCP|
165 |Connection|Ethernet|
166 |Port No.|502|
167 |Device No.|1|
168 |HMI No.|0|
169
170 **Address List**
171
172 |**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
173 |Bit|X|X|X d|0~~63|
174 |Bit|Y|Y|Y d|0~~63|
175 |Bit|D|D|D d|0~~29999|
176 |Bit|M|M|M d|0~~8191|
177 |Bit|SM|SM|SM d|0~~4095|
178 |Bit|S|S|S h|0~~2047|
179 |Bit|T|T|T d|0~~511|
180 |Bit|C|C|C d|0~~511|
181 |Bit|HC|HC|HC d|0~~255|
182 |Word|X|X|X h|0~~63|
183 |Word|Y|Y|Y d|0~~63|
184 |Word|SR|SR|SR d|0~~2047|
185 |Word|D|D|D d|0~~29999|
186 |Word|T|T|T d|0~~511|
187 |Word|C|C|C h|0~~511|
188 |Word|E|E|E d|0~~9|
189
190 **PLC Setting**
191
192 1.Open COMMGR ,[Add]→[Driver Name] Driver1→[Connection Setup]→[Type] Ethernet→[Ethernet Card] →[Description] Realtek PCIe GBE Family Controller→[Search] PC and PLC are in
193 the same LAN, click the corresponding PLC IP searched.→[OK]
194
195 (% style="text-align:center" %)
196 [[image:2.1.png]]
197
198 2. Open ISPSoft,[Project]→Double click[HWCONFIG]
199
200 (% style="text-align:center" %)
201 [[image:台达2.2.png]]
202
203 PLC Default Parameters:
204 [Device]→[Hardware Configuration]→[CPU(AS332T-A)]→[Hardware Configuration]→[General] →[Ethernet Port Basic Setting]: [IP Address]192.168.40.122, [Subnet Mask]255.255.255.0,[Gateway]
205 192.168.40.1→[Download]
206
207 (% style="text-align:center" %)
208 [[image:台达2.3-.png]]
209
210 (% style="text-align:center" %)
211 [[image:台达2.4.png]]
212
213 **Cable Wiring**
214
215 Figure
216
217 [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_f2c92ecd57ebfbd0.png||alt="image-20220831155101-1.png" height="262" width="118"]] [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_32ea98dfbc23a591.png||alt="image-20220831160055-5.png" height="198" width="455"]]