Skip to Content

Changes for page Siemens

Last modified by Joe on 2024/08/30 14:46
From version 14.1
edited by Theodore Xu
on 2023/08/25 15:10
Change comment: There is no comment for this version
To version 48.1
edited by Theodore Xu
on 2024/02/27 19:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,34 +1,133 @@
1 -= {{id name="HSiemens"/}}**Siemens ** =
1 +== **S7-200 Smart Serial** ==
2 2  
3 -== **S7-200 Smart Ethernet ** ==
3 +**V-BOX setting**
4 4  
5 -[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
5 +(% style="width:1323.87px" %)
6 +|**Items**|**Settings**|**Note**
7 +|Protocol|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI|
8 +|Connection|(% style="width:783px" %)RS485|
9 +|Baud rate|(% style="width:783px" %)9600|
10 +|Data bit|(% style="width:783px" %)8|
11 +|Parity|(% style="width:783px" %)EVEN|
12 +|Stop bit|(% style="width:783px" %)1|
13 +|PLC station No.|(% style="width:783px" %)2|
6 6  
7 -**1）PLC software**
15 +(% style="text-align:center" %)
16 +[[image:西门子200串口.png]]
8 8  
18 +**Address List **
19 +
20 +|**Type**|**Device register**|**Format**|**Range**|**Note**
21 +|(% rowspan="9" %)Bit|I|I ddddd.o|0.0~~99999.7|
22 +|Q|Q ddddd.o|0.0~~99999.7|
23 +|V|VWbit ddddd.o|0.0~~99999.7|
24 +|V|V ddddd.o|0.0~~99999.7|
25 +|M|M ddddd.o|0.0~~99999.7|
26 +|SM|ddddd.o|0.0~~99999.7|
27 +|S|ddddd.o|0.0~~99999.7|Read only
28 +|T|ddddd|0~~99999|Timer state, read only
29 +|C|ddddd|0~~99999|Counter state, read only
30 +|(% rowspan="12" %)Word|I|IW ddddd|0~~99999|
31 +|Q|QW ddddd|0~~99999|
32 +|AI|AIW ddddd|0~~99999|
33 +|AQ|VB ddddd|0~~99999|
34 +|V|VW ddddd|0~~99998|(((
35 +VW0=VB (0~~1)
36 +
37 +VW2=VB (2~~3)
38 +
39 +Address value is a multiple of 2
40 +)))
41 +|V|VD ddddd|0~~99998|(((
42 +VD0=VB (0~~3)
43 +
44 +VD2=VB (4~~7)
45 +
46 +Address value is a multiple of 4
47 +)))
48 +|M|MB ddddd|0~~99999|
49 +|M|MW ddddd|0~~99999|(((
50 +MW0=MB(0~~1)
51 +
52 +MW2=MB(2~~3)
53 +
54 +Address value is a multiple of 2
55 +)))
56 +|M|MD ddddd|0~~99999|(((
57 +MD0=MB(0~~3)
58 +
59 +MD4=MB(4~~7)
60 +
61 +Address value is a multiple of 4
62 +)))
63 +|T|TW ddddd|0~~99999|Value of timer
64 +|C|CW ddddd|0~~99999|Value of counter
65 +|W|SW ddddd|0~~99999|
66 +
67 +**PLC setting**
68 +
9 9  (% style="text-align:center" %)
10 10  [[image:西门子软件版本.png]]
11 11  
12 -**2）Ethernet Configuration**
72 +(% style="text-align:center" %)
73 +[[image:485通讯配置.png]]
13 13  
75 +**Connect and Download**
76 +
14 14  (% style="text-align:center" %)
78 +[[image:以太网 PC和PLC连接.png]]
79 +
80 +(% style="text-align:center" %)
81 +[[image:以太网下载.png]]
82 +
83 +**Cable Wiring**
84 +
85 +(% style="text-align:center" %)
86 +[[image:485接线.png]]
87 +
88 +== **S7-200 Smart Ethernet ** ==
89 +
90 +**V-BOX setting**
91 +
92 +|**Items**|**Settings**
93 +|Protocol|Siemens S7-200 Smart（Ethernet）
94 +|Connection|Ethernet
95 +|Port No.|102
96 +|PLC station No.|2
97 +
98 +(% style="text-align:center" %)
99 +[[image:西门子200smart 以太网.png]]
100 +
101 +**PLC setting**
102 +
103 +(% style="text-align:center" %)
104 +[[image:西门子软件版本.png]]
105 +
106 +(% style="text-align:center" %)
15 15  [[image:以太网通讯配置.png]]
16 16  
17 -**3）Connect PC software**
109 +**Connect and Download**
18 18  
19 19  (% style="text-align:center" %)
112 +[[image:以太网 PC和PLC连接.png]]
113 +
114 +(% style="text-align:center" %)
20 20  [[image:以太网下载.png]]
21 21  
22 -4)**Configure of V-net**
117 +**Cable Wiring**
23 23  
119 +V-Box : RJ45 Ethernet interface
120 +
121 +PLC : RJ45 Ethernet interface
122 +
24 24  (% style="text-align:center" %)
25 -[[image:西门子200smart 以太网.png]]
124 +[[image:以太网连接.png]]
26 26  
27 -== {{id name="HS7-300Ethernet"/}}**S7-300 Ethernet ** ==
126 +== **S7-300 Ethernet ** ==
28 28  
29 29  Supported Series: Siemens S7-300 series PLC
30 30  
31 -**1）V-BOX setting**
130 +**V-BOX setting**
32 32  
33 33  |**Items**|**Settings**|**Note**
34 34  |Protocol|Simens S7-300 Ethernet|
... ... @@ -36,21 +36,21 @@
36 36  |Port No.|102|
37 37  |PLC station No.|2|Need to be same as the PLC setting
38 38  
39 -**2）Address List**
138 +**Address List**
40 40  
41 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
42 -|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
43 -|Q|Q|Q ddddd.o|0.0~~99999.7|
44 -|M|M|M ddddd.o|0.0~~99999.7|
45 -|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
140 +|**Type**|**Device register**|**Format**|**Range**|**Note**
141 +|(% rowspan="4" %)Bit|I|I ddddd.o|0.0~~99999.7|
142 +|Q|Q ddddd.o|0.0~~99999.7|
143 +|M|M ddddd.o|0.0~~99999.7|
144 +|DB0.DB~~DB99.DB|DBxDB nndddd.o|0.0~~99999999.7|(((
46 46  nn: block number;
47 47  
48 48  dddd: address;
49 49  )))
50 -|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
51 -|Q|QW|QW ddddd|0~~99999|
52 -|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
53 -|MW|MW ddddd|0~~99999|(((
149 +|(% rowspan="8" %)Word|I|IW ddddd|0~~99999|
150 +|Q|QW ddddd|0~~99999|
151 +|(% rowspan="3" %)M|MB ddddd|0~~99999|
152 +|MW ddddd|0~~99999|(((
54 54  MW0=MB(0~~1)
55 55  
56 56  MW2=MB(2~~3)
... ... @@ -57,7 +57,7 @@
57 57  
58 58  Address value is a multiple of 2
59 59  )))
60 -|MD|MD ddddd|0~~99999|(((
159 +|MD ddddd|0~~99999|(((
61 61  MD0=MB(0~~3)
62 62  
63 63  MD4=MB(4~~7)
... ... @@ -64,49 +64,39 @@
64 64  
65 65  Address value is a multiple of 4
66 66  )))
67 -|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
166 +|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
68 68  nn: block number;
69 69  
70 70  dddd: address
71 71  )))
72 -|DBxDBW|DBxDBW nndddd|0~~99999999
73 -|DBxDBD|DBxDBD nndddd|0~~99999999
171 +|DBxDBW nndddd|0~~99999999
172 +|DBxDBD nndddd|0~~99999999
74 74  
75 -**3）Configure the communication protocol**
174 +**Configure the communication protocol**
76 76  
77 -{{id name="Iimage-20220824161345-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
176 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
78 78  
79 -**4）Cable Wiring**
178 +**Cable Wiring**
80 80  
81 -{{id name="Iimage-20220824161450-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
180 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
82 82  
83 -== {{id name="HS7-1200A0Ethernet"/}}**S7-1200 Ethernet ** ==
182 +== **S7-1200 Ethernet ** ==
84 84  
85 85  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
86 86  
87 -== {{id name="HS7-XXXEthernetl"/}}**S7-XXX Ethernet l** ==
186 +**V-BOX Setting**
88 88  
89 -Supported Series: Siemens S7-400, S7-1200 and S7-1500
90 -
91 -**1）V-BOX setting**
92 -
93 -|=**Items**|=**Settings**|=**Note**
94 -|Protocol|Siemens S7-XXX|
188 +|**Items**|**Settings**|**Note**
189 +|Protocol|Siemens S7-1200|
95 95  |Connection|Ethernet|
96 96  |Port No.|102|
97 -|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
98 -|HMI No.|Rack (Default as 0)|
192 +|PLC station No.|2|
99 99  
100 -Slot from TIA Portal is equal to Device No. of V-net
194 +(% style="text-align:center" %)
195 +[[image:西门子1200协议参数.png]]
101 101  
102 -Rack from TIA Portal is equal to HMI No. of V-net
197 +**Address List**
103 103  
104 -{{id name="Iimage-20220824162459-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
105 -
106 -{{id name="Iimage-20220824163305-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
107 -
108 -**2）Address List**
109 -
110 110  |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
111 111  |(% rowspan="4" %)Bit|I|I|M d.o|(((
112 112  d:0~-~-9999
... ... @@ -185,18 +185,176 @@
185 185  Address value is a multiple of 4
186 186  )))
187 187  
188 -**3）Configure the communication protocol**
277 +{{info}}
278 +✎Note:
189 189  
190 -{{id name="Iimage-20220824163448-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
280 +* The S7-1200 supports simultaneous connection of three devices.
281 +* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
282 +* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
283 +* V-BOX operation character length needs to be set to 2 times the length of the Siemens character for proper display
284 +{{/info}}
191 191  
286 +**PLC Settings**
287 +
288 +Add BD
289 +
290 +* Please uncheck [Symbolic access only] option;
291 +
292 +(% style="text-align:center" %)
293 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
294 +
295 +Address settings, using BD2 as example.
296 +
297 +* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
298 +* 2 represent DB block number
299 +* xxxx represent address
300 +
301 +**Such as:**
302 +
303 +* DBxDBB20000 = DB2.DBB0
304 +* DBxDBW20004 = DB2.DBW4
305 +
306 +(% style="text-align:center" %)
307 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
308 +
309 +**How to connect with S7-1200 Firmware V4.0**
310 +
311 +PLC configuration
312 +
313 +* Double click [device configuration] in Siemens via software
314 +* Double click [protection] to enter protection configuration screen
315 +
316 +(% style="text-align:center" %)
317 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
318 +
319 +* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
320 +
321 +(% style="text-align:center" %)
322 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
323 +
324 +DB settings
325 +
326 +* Right click [DB], select [properties]
327 +* Uncheck [optimized block access]
328 +
329 +**Cable Wiring**
330 +
331 +(% style="text-align:center" %)
332 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
333 +
334 +== **S7-XXX Ethernet** ==
335 +
336 +Supported Series: Siemens S7-400, S7-1200 and S7-1500
337 +
338 +**V-BOX setting**
339 +
340 +|=**Items**|=**Settings**|=**Note**
341 +|Protocol|Siemens S7-XXX|
342 +|Connection|Ethernet|
343 +|Port No.|102|
344 +|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
345 +|HMI No.|Rack (Default as 0)|
346 +
347 +Slot from TIA Portal is equal to Device No. of V-net
348 +
349 +Rack from TIA Portal is equal to HMI No. of V-net
350 +
351 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
352 +
353 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
354 +
355 +**Address List**
356 +
357 +|**Type**|**Device register**|**Format**|**Range**|**Note**
358 +|(% rowspan="4" %)Bit|I|M d.o|(((
359 +d:0~-~-9999
360 +
361 +o:0-7
362 +)))|
363 +|Q|Q d.o|(((
364 +d:0~-~-9999
365 +
366 +o:0-7
367 +)))|
368 +|M|M d.o|(((
369 +d:0~-~-9999
370 +
371 +o:0-7
372 +)))|
373 +|DB0.DB-DB99.DB|DBxDBnndddd.o|(((
374 +nn:0-9999,
375 +
376 +dddd:0-9999,
377 +
378 +o:0-7
379 +)))|(((
380 +nn:DB No.
381 +
382 +dddd:address value
383 +
384 +o: digit address
385 +)))
386 +|(% rowspan="8" %)Word|M|MB d|d:0-99999|
387 +|M|MW d|d:0-99999|(((
388 +MW0=MB(0~~1)
389 +
390 +MW2=MB(2~~3)
391 +
392 +Address value is a multiple of 2
393 +)))
394 +|M|MD d|d:0-99999|(((
395 +MD0=MB(0~~3)
396 +
397 +MD4=MB(4~~7)
398 +
399 +Address value is a multiple of 4
400 +)))
401 +|I|IW d|d:0-99999|
402 +|Q|QW d|d:0-99999|
403 +|DB0.DB-DB99.DB|DBxDBBnndddd|(((
404 +nn:0-9999
405 +
406 +dddd:0-9999
407 +)))|(((
408 +nn:DB No.
409 +
410 +dddd:address value
411 +)))
412 +|DB0.DB-DB99.DB|DBxDBWnndddd|(((
413 +nn:0-9999
414 +
415 +dddd:0-9999
416 +)))|(((
417 +nn:DB No.
418 +
419 +dddd:address value
420 +
421 +Address value is a multiple of 2
422 +)))
423 +|DB0.DB-DB99.DB|DBxDBDnndddd|(((
424 +nn:0-9999
425 +
426 +dddd:0-9999
427 +)))|(((
428 +nn:DB No.
429 +
430 +dddd:address value
431 +
432 +Address value is a multiple of 4
433 +)))
434 +
435 +**Configure the communication protocol**
436 +
437 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
438 +
192 192  **✎Note:**
193 193  
194 194  * The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
195 195  * V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
196 196  
197 -**4）Cable Wiring**
444 +**Cable Wiring**
198 198  
199 -{{id name="Iimage-20220824162342-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
446 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
200 200  
201 201  == {{id name="HLOGOEthernet"/}}**LOGO Ethernet ** ==
202 202  
... ... @@ -233,30 +233,27 @@
233 233  
234 234  Click [Tools]~-~-[Ethernet Connections],shown as below.
235 235  
236 -{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
483 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
237 237  
238 238  Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
239 239  
240 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
487 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
241 241  
242 242  **TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
243 243  
244 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
491 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
245 245  
246 246   **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
247 247  
248 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
495 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
249 249  
250 250  **V-BOX Communication Settings**
251 251  
252 252  Set PLC IP in [IP Address] settings;
253 253  
254 -{{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png||alt="LldwDGntf4.png" height="530" width="899"]]
501 +(% style="text-align:center" %)
502 +[[image:V-NET_Client logo.png]]
255 255  
256 -Enable V-BOX Ethernet in [Network];
257 -
258 -{{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png||alt="WgvjfWbQif.png" height="654" width="1195"]]
259 -
260 260  TSAP setting
261 261  
262 262  * The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
... ... @@ -264,7 +264,7 @@
264 264  **function** **init**.main()
265 265   addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
266 266   addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
267 - **end**
511 +**end**
268 268  
269 269  Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
270 270  
1697099618537-157.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +36.4 KB
Content
485接线.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +242.2 KB
Content
485通讯配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +154.4 KB
Content
V-NET_Client logo.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +22.4 KB
Content
V-NET_Client logo8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +22.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +107.1 KB
Content
以太网 PC和PLC连接.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +131.3 KB
Content
以太网连接.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +257.6 KB
Content
西门子1200协议参数.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.6 KB
Content
西门子200串口.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.5 KB
Content