Skip to Content

Changes for page Siemens

Last modified by Joe on 2024/08/30 14:46
From version 17.1
edited by Theodore Xu
on 2023/08/25 15:50
Change comment: There is no comment for this version
To version 47.1
edited by Theodore Xu
on 2024/02/27 19:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,36 +3,121 @@
1 -= {{id name="HSiemens"/}}**Siemens ** =
2 -
3 3  == **S7-200 Smart Serial** ==
4 4  
3 +**V-BOX setting**
4 +
5 +(% style="width:1323.87px" %)
6 +|**Items**|**Settings**|**Note**
7 +|Protocol|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI|
8 +|Connection|(% style="width:783px" %)RS485|
9 +|Baud rate|(% style="width:783px" %)9600|
10 +|Data bit|(% style="width:783px" %)8|
11 +|Parity|(% style="width:783px" %)EVEN|
12 +|Stop bit|(% style="width:783px" %)1|
13 +|PLC station No.|(% style="width:783px" %)2|
14 +
15 +(% style="text-align:center" %)
16 +[[image:西门子200串口.png]]
17 +
18 +**Address List **
19 +
20 +|**Type**|**Device register**|**Format**|**Range**|**Note**
21 +|(% rowspan="9" %)Bit|I|I ddddd.o|0.0~~99999.7|
22 +|Q|Q ddddd.o|0.0~~99999.7|
23 +|V|VWbit ddddd.o|0.0~~99999.7|
24 +|V|V ddddd.o|0.0~~99999.7|
25 +|M|M ddddd.o|0.0~~99999.7|
26 +|SM|ddddd.o|0.0~~99999.7|
27 +|S|ddddd.o|0.0~~99999.7|Read only
28 +|T|ddddd|0~~99999|Timer state, read only
29 +|C|ddddd|0~~99999|Counter state, read only
30 +|(% rowspan="12" %)Word|I|IW ddddd|0~~99999|
31 +|Q|QW ddddd|0~~99999|
32 +|AI|AIW ddddd|0~~99999|
33 +|AQ|VB ddddd|0~~99999|
34 +|V|VW ddddd|0~~99998|(((
35 +VW0=VB (0~~1)
36 +
37 +VW2=VB (2~~3)
38 +
39 +Address value is a multiple of 2
40 +)))
41 +|V|VD ddddd|0~~99998|(((
42 +VD0=VB (0~~3)
43 +
44 +VD2=VB (4~~7)
45 +
46 +Address value is a multiple of 4
47 +)))
48 +|M|MB ddddd|0~~99999|
49 +|M|MW ddddd|0~~99999|(((
50 +MW0=MB(0~~1)
51 +
52 +MW2=MB(2~~3)
53 +
54 +Address value is a multiple of 2
55 +)))
56 +|M|MD ddddd|0~~99999|(((
57 +MD0=MB(0~~3)
58 +
59 +MD4=MB(4~~7)
60 +
61 +Address value is a multiple of 4
62 +)))
63 +|T|TW ddddd|0~~99999|Value of timer
64 +|C|CW ddddd|0~~99999|Value of counter
65 +|W|SW ddddd|0~~99999|
66 +
67 +**PLC setting**
68 +
69 +(% style="text-align:center" %)
70 +[[image:西门子软件版本.png]]
71 +
72 +(% style="text-align:center" %)
73 +[[image:485通讯配置.png]]
74 +
75 +**Connect and Download**
76 +
77 +(% style="text-align:center" %)
78 +[[image:以太网 PC和PLC连接.png]]
79 +
80 +(% style="text-align:center" %)
81 +[[image:以太网下载.png]]
82 +
83 +**Cable Wiring**
84 +
85 +(% style="text-align:center" %)
86 +[[image:485接线.png]]
87 +
5 5  == **S7-200 Smart Ethernet ** ==
6 6  
7 -[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
90 +**V-BOX setting**
8 8  
9 -(% class="wikigeneratedid" id="H1FF09V-BOX" %)
10 -**1）V-BOX **
92 +|**Items**|**Settings**
93 +|Protocol|Siemens S7-200 Smart（Ethernet）
94 +|Connection|Ethernet
95 +|Port No.|102
96 +|PLC station No.|2
11 11  
12 12  (% style="text-align:center" %)
13 13  [[image:西门子200smart 以太网.png]]
14 14  
15 -**1）PLC software**
101 +**PLC setting**
16 16  
17 17  (% style="text-align:center" %)
18 18  [[image:西门子软件版本.png]]
19 19  
20 -**2）Ethernet Configuration**
21 -
22 22  (% style="text-align:center" %)
23 23  [[image:以太网通讯配置.png]]
24 24  
25 -**3）Connect PC software**
109 +**Connect and Download**
26 26  
27 27  (% style="text-align:center" %)
112 +[[image:以太网 PC和PLC连接.png]]
113 +
114 +(% style="text-align:center" %)
28 28  [[image:以太网下载.png]]
29 29  
117 +**Cable Wiring**
30 30  
31 -**5）wiring**
32 -
33 -
34 34  V-Box : RJ45 Ethernet interface
35 35  
36 36  PLC : RJ45 Ethernet interface
... ... @@ -38,12 +38,11 @@
38 38  (% style="text-align:center" %)
39 39  [[image:以太网连接.png]]
40 40  
126 +== **S7-300 Ethernet ** ==
41 41  
42 -== {{id name="HS7-300Ethernet"/}}**S7-300 Ethernet ** ==
43 -
44 44  Supported Series: Siemens S7-300 series PLC
45 45  
46 -**1）V-BOX setting**
130 +**V-BOX setting**
47 47  
48 48  |**Items**|**Settings**|**Note**
49 49  |Protocol|Simens S7-300 Ethernet|
... ... @@ -51,21 +51,21 @@
51 51  |Port No.|102|
52 52  |PLC station No.|2|Need to be same as the PLC setting
53 53  
54 -**2）Address List**
138 +**Address List**
55 55  
56 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
57 -|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
58 -|Q|Q|Q ddddd.o|0.0~~99999.7|
59 -|M|M|M ddddd.o|0.0~~99999.7|
60 -|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
140 +|**Type**|**Device register**|**Format**|**Range**|**Note**
141 +|(% rowspan="4" %)Bit|I|I ddddd.o|0.0~~99999.7|
142 +|Q|Q ddddd.o|0.0~~99999.7|
143 +|M|M ddddd.o|0.0~~99999.7|
144 +|DB0.DB~~DB99.DB|DBxDB nndddd.o|0.0~~99999999.7|(((
61 61  nn: block number;
62 62  
63 63  dddd: address;
64 64  )))
65 -|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
66 -|Q|QW|QW ddddd|0~~99999|
67 -|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
68 -|MW|MW ddddd|0~~99999|(((
149 +|(% rowspan="8" %)Word|I|IW ddddd|0~~99999|
150 +|Q|QW ddddd|0~~99999|
151 +|(% rowspan="3" %)M|MB ddddd|0~~99999|
152 +|MW ddddd|0~~99999|(((
69 69  MW0=MB(0~~1)
70 70  
71 71  MW2=MB(2~~3)
... ... @@ -72,7 +72,7 @@
72 72  
73 73  Address value is a multiple of 2
74 74  )))
75 -|MD|MD ddddd|0~~99999|(((
159 +|MD ddddd|0~~99999|(((
76 76  MD0=MB(0~~3)
77 77  
78 78  MD4=MB(4~~7)
... ... @@ -79,49 +79,39 @@
79 79  
80 80  Address value is a multiple of 4
81 81  )))
82 -|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
166 +|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
83 83  nn: block number;
84 84  
85 85  dddd: address
86 86  )))
87 -|DBxDBW|DBxDBW nndddd|0~~99999999
88 -|DBxDBD|DBxDBD nndddd|0~~99999999
171 +|DBxDBW nndddd|0~~99999999
172 +|DBxDBD nndddd|0~~99999999
89 89  
90 -**3）Configure the communication protocol**
174 +**Configure the communication protocol**
91 91  
92 -{{id name="Iimage-20220824161345-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
176 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
93 93  
94 -**4）Cable Wiring**
178 +**Cable Wiring**
95 95  
96 -{{id name="Iimage-20220824161450-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
180 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
97 97  
98 -== {{id name="HS7-1200A0Ethernet"/}}**S7-1200 Ethernet ** ==
182 +== **S7-1200 Ethernet ** ==
99 99  
100 100  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
101 101  
102 -== {{id name="HS7-XXXEthernetl"/}}**S7-XXX Ethernet l** ==
186 +**V-BOX Setting**
103 103  
104 -Supported Series: Siemens S7-400, S7-1200 and S7-1500
105 -
106 -**1）V-BOX setting**
107 -
108 -|=**Items**|=**Settings**|=**Note**
109 -|Protocol|Siemens S7-XXX|
188 +|**Items**|**Settings**|**Note**
189 +|Protocol|Siemens S7-1200|
110 110  |Connection|Ethernet|
111 111  |Port No.|102|
112 -|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
113 -|HMI No.|Rack (Default as 0)|
192 +|PLC station No.|2|
114 114  
115 -Slot from TIA Portal is equal to Device No. of V-net
194 +(% style="text-align:center" %)
195 +[[image:西门子1200协议参数.png]]
116 116  
117 -Rack from TIA Portal is equal to HMI No. of V-net
197 +**Address List**
118 118  
119 -{{id name="Iimage-20220824162459-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
120 -
121 -{{id name="Iimage-20220824163305-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
122 -
123 -**2）Address List**
124 -
125 125  |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
126 126  |(% rowspan="4" %)Bit|I|I|M d.o|(((
127 127  d:0~-~-9999
... ... @@ -200,18 +200,176 @@
200 200  Address value is a multiple of 4
201 201  )))
202 202  
203 -**3）Configure the communication protocol**
277 +{{info}}
278 +✎Note:
204 204  
205 -{{id name="Iimage-20220824163448-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
280 +* The S7-1200 supports simultaneous connection of three devices.
281 +* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
282 +* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
283 +* V-BOX operation character length needs to be set to 2 times the length of the Siemens character for proper display
284 +{{/info}}
206 206  
286 +**PLC Settings**
287 +
288 +Add BD
289 +
290 +* Please uncheck [Symbolic access only] option;
291 +
292 +(% style="text-align:center" %)
293 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
294 +
295 +Address settings, using BD2 as example.
296 +
297 +* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
298 +* 2 represent DB block number
299 +* xxxx represent address
300 +
301 +**Such as:**
302 +
303 +* DBxDBB20000 = DB2.DBB0
304 +* DBxDBW20004 = DB2.DBW4
305 +
306 +(% style="text-align:center" %)
307 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
308 +
309 +**How to connect with S7-1200 Firmware V4.0**
310 +
311 +PLC configuration
312 +
313 +* Double click [device configuration] in Siemens via software
314 +* Double click [protection] to enter protection configuration screen
315 +
316 +(% style="text-align:center" %)
317 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
318 +
319 +* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
320 +
321 +(% style="text-align:center" %)
322 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
323 +
324 +DB settings
325 +
326 +* Right click [DB], select [properties]
327 +* Uncheck [optimized block access]
328 +
329 +**Cable Wiring**
330 +
331 +(% style="text-align:center" %)
332 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
333 +
334 +== **S7-XXX Ethernet** ==
335 +
336 +Supported Series: Siemens S7-400, S7-1200 and S7-1500
337 +
338 +**V-BOX setting**
339 +
340 +|=**Items**|=**Settings**|=**Note**
341 +|Protocol|Siemens S7-XXX|
342 +|Connection|Ethernet|
343 +|Port No.|102|
344 +|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
345 +|HMI No.|Rack (Default as 0)|
346 +
347 +Slot from TIA Portal is equal to Device No. of V-net
348 +
349 +Rack from TIA Portal is equal to HMI No. of V-net
350 +
351 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
352 +
353 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
354 +
355 +**Address List**
356 +
357 +|**Type**|**Device register**|**Format**|**Range**|**Note**
358 +|(% rowspan="4" %)Bit|I|M d.o|(((
359 +d:0~-~-9999
360 +
361 +o:0-7
362 +)))|
363 +|Q|Q d.o|(((
364 +d:0~-~-9999
365 +
366 +o:0-7
367 +)))|
368 +|M|M d.o|(((
369 +d:0~-~-9999
370 +
371 +o:0-7
372 +)))|
373 +|DB0.DB-DB99.DB|DBxDBnndddd.o|(((
374 +nn:0-9999,
375 +
376 +dddd:0-9999,
377 +
378 +o:0-7
379 +)))|(((
380 +nn:DB No.
381 +
382 +dddd:address value
383 +
384 +o: digit address
385 +)))
386 +|(% rowspan="8" %)Word|M|MB d|d:0-99999|
387 +|M|MW d|d:0-99999|(((
388 +MW0=MB(0~~1)
389 +
390 +MW2=MB(2~~3)
391 +
392 +Address value is a multiple of 2
393 +)))
394 +|M|MD d|d:0-99999|(((
395 +MD0=MB(0~~3)
396 +
397 +MD4=MB(4~~7)
398 +
399 +Address value is a multiple of 4
400 +)))
401 +|I|IW d|d:0-99999|
402 +|Q|QW d|d:0-99999|
403 +|DB0.DB-DB99.DB|DBxDBBnndddd|(((
404 +nn:0-9999
405 +
406 +dddd:0-9999
407 +)))|(((
408 +nn:DB No.
409 +
410 +dddd:address value
411 +)))
412 +|DB0.DB-DB99.DB|DBxDBWnndddd|(((
413 +nn:0-9999
414 +
415 +dddd:0-9999
416 +)))|(((
417 +nn:DB No.
418 +
419 +dddd:address value
420 +
421 +Address value is a multiple of 2
422 +)))
423 +|DB0.DB-DB99.DB|DBxDBDnndddd|(((
424 +nn:0-9999
425 +
426 +dddd:0-9999
427 +)))|(((
428 +nn:DB No.
429 +
430 +dddd:address value
431 +
432 +Address value is a multiple of 4
433 +)))
434 +
435 +**Configure the communication protocol**
436 +
437 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
438 +
207 207  **✎Note:**
208 208  
209 209  * The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
210 210  * V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
211 211  
212 -**4）Cable Wiring**
444 +**Cable Wiring**
213 213  
214 -{{id name="Iimage-20220824162342-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
446 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
215 215  
216 216  == {{id name="HLOGOEthernet"/}}**LOGO Ethernet ** ==
217 217  
... ... @@ -248,30 +248,28 @@
248 248  
249 249  Click [Tools]~-~-[Ethernet Connections],shown as below.
250 250  
251 -{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
483 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
252 252  
253 253  Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
254 254  
255 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
487 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
256 256  
257 257  **TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
258 258  
259 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
491 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
260 260  
261 261   **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
262 262  
263 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
495 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
264 264  
265 265  **V-BOX Communication Settings**
266 266  
267 267  Set PLC IP in [IP Address] settings;
268 268  
269 -{{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png||alt="LldwDGntf4.png" height="530" width="899"]]
501 +(% style="text-align:center" %)
502 +[[image:V-NET_Client logo8.png]]
270 270  
271 -Enable V-BOX Ethernet in [Network];
272 272  
273 -{{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png||alt="WgvjfWbQif.png" height="654" width="1195"]]
274 -
275 275  TSAP setting
276 276  
277 277  * The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
1697099618537-157.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +36.4 KB
Content
485接线.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +242.2 KB
Content
485通讯配置.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +154.4 KB
Content
V-NET_Client logo8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +22.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +107.1 KB
Content
以太网 PC和PLC连接.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +131.3 KB
Content
西门子1200协议参数.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.6 KB
Content
西门子200串口.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.5 KB
Content