Skip to Content

Changes for page Siemens

Last modified by Joe on 2024/08/30 14:46
From version 34.1
edited by Theodore Xu
on 2023/09/12 10:56
Change comment: There is no comment for this version
To version 46.1
edited by Theodore Xu
on 2023/10/12 17:06
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,17 +3,16 @@
1 -= **Siemens ** =
2 -
3 3  == **S7-200 Smart Serial** ==
4 4  
5 5  **V-BOX setting**
6 6  
7 7  (% style="width:1323.87px" %)
8 -|Protocol|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI
9 -|Connection|(% style="width:783px" %)RS485
10 -|Baud rate|(% style="width:783px" %)9600
11 -|Data bit|(% style="width:783px" %)8
12 -|Parity|(% style="width:783px" %)EVEN
13 -|Stop bit|(% style="width:783px" %)1
14 -|PLC station No.|(% style="width:783px" %)2
6 +|**Items**|**Settings**|**Note**
7 +|Protocol|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI|
8 +|Connection|(% style="width:783px" %)RS485|
9 +|Baud rate|(% style="width:783px" %)9600|
10 +|Data bit|(% style="width:783px" %)8|
11 +|Parity|(% style="width:783px" %)EVEN|
12 +|Stop bit|(% style="width:783px" %)1|
13 +|PLC station No.|(% style="width:783px" %)2|
15 15  
16 16  (% style="text-align:center" %)
17 17  [[image:西门子200串口.png]]
... ... @@ -18,21 +18,21 @@
18 18  
19 19  **Address List **
20 20  
21 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
22 -|(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
23 -|Q|Q|Q ddddd.o|0.0~~99999.7|
24 -|V|VWbit|VWbit ddddd.o|0.0~~99999.7|
25 -|V|V|V ddddd.o|0.0~~99999.7|
26 -|M|M|M ddddd.o|0.0~~99999.7|
27 -|SM|SM|ddddd.o|0.0~~99999.7|
28 -|S|S|ddddd.o|0.0~~99999.7|Read only
29 -|T|T|ddddd|0~~99999|Timer state, read only
30 -|C|C|ddddd|0~~99999|Counter state, read only
31 -|(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
32 -|Q|QW|QW ddddd|0~~99999|
33 -|AI|AIW|AIW ddddd|0~~99999|
34 -|AQ|VB|VB ddddd|0~~99999|
35 -|V|VW|VW ddddd|0~~99998|(((
20 +|**Type**|**Device register**|**Format**|**Range**|**Note**
21 +|(% rowspan="9" %)Bit|I|I ddddd.o|0.0~~99999.7|
22 +|Q|Q ddddd.o|0.0~~99999.7|
23 +|V|VWbit ddddd.o|0.0~~99999.7|
24 +|V|V ddddd.o|0.0~~99999.7|
25 +|M|M ddddd.o|0.0~~99999.7|
26 +|SM|ddddd.o|0.0~~99999.7|
27 +|S|ddddd.o|0.0~~99999.7|Read only
28 +|T|ddddd|0~~99999|Timer state, read only
29 +|C|ddddd|0~~99999|Counter state, read only
30 +|(% rowspan="12" %)Word|I|IW ddddd|0~~99999|
31 +|Q|QW ddddd|0~~99999|
32 +|AI|AIW ddddd|0~~99999|
33 +|AQ|VB ddddd|0~~99999|
34 +|V|VW ddddd|0~~99998|(((
36 36  VW0=VB (0~~1)
37 37  
38 38  VW2=VB (2~~3)
... ... @@ -39,7 +39,7 @@
39 39  
40 40  Address value is a multiple of 2
41 41  )))
42 -|V|VD|VD ddddd|0~~99998|(((
41 +|V|VD ddddd|0~~99998|(((
43 43  VD0=VB (0~~3)
44 44  
45 45  VD2=VB (4~~7)
... ... @@ -46,8 +46,8 @@
46 46  
47 47  Address value is a multiple of 4
48 48  )))
49 -|M|MB|MB ddddd|0~~99999|
50 -|M|MW|MW ddddd|0~~99999|(((
48 +|M|MB ddddd|0~~99999|
49 +|M|MW ddddd|0~~99999|(((
51 51  MW0=MB(0~~1)
52 52  
53 53  MW2=MB(2~~3)
... ... @@ -54,7 +54,7 @@
54 54  
55 55  Address value is a multiple of 2
56 56  )))
57 -|M|MD|MD ddddd|0~~99999|(((
56 +|M|MD ddddd|0~~99999|(((
58 58  MD0=MB(0~~3)
59 59  
60 60  MD4=MB(4~~7)
... ... @@ -61,9 +61,9 @@
61 61  
62 62  Address value is a multiple of 4
63 63  )))
64 -|T|TW|TW ddddd|0~~99999|Value of timer
65 -|C|CW|CW ddddd|0~~99999|Value of counter
66 -|W|SW|SW ddddd|0~~99999|
63 +|T|TW ddddd|0~~99999|Value of timer
64 +|C|CW ddddd|0~~99999|Value of counter
65 +|W|SW ddddd|0~~99999|
67 67  
68 68  **PLC setting**
69 69  
... ... @@ -124,11 +124,11 @@
124 124  (% style="text-align:center" %)
125 125  [[image:以太网连接.png]]
126 126  
127 -== {{id name="HS7-300Ethernet"/}}**S7-300 Ethernet ** ==
126 +== **S7-300 Ethernet ** ==
128 128  
129 129  Supported Series: Siemens S7-300 series PLC
130 130  
131 -**1）V-BOX setting**
130 +**V-BOX setting**
132 132  
133 133  |**Items**|**Settings**|**Note**
134 134  |Protocol|Simens S7-300 Ethernet|
... ... @@ -136,21 +136,21 @@
136 136  |Port No.|102|
137 137  |PLC station No.|2|Need to be same as the PLC setting
138 138  
139 -**2）Address List**
138 +**Address List**
140 140  
141 -|**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
142 -|(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
143 -|Q|Q|Q ddddd.o|0.0~~99999.7|
144 -|M|M|M ddddd.o|0.0~~99999.7|
145 -|DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
140 +|**Type**|**Device register**|**Format**|**Range**|**Note**
141 +|(% rowspan="4" %)Bit|I|I ddddd.o|0.0~~99999.7|
142 +|Q|Q ddddd.o|0.0~~99999.7|
143 +|M|M ddddd.o|0.0~~99999.7|
144 +|DB0.DB~~DB99.DB|DBxDB nndddd.o|0.0~~99999999.7|(((
146 146  nn: block number;
147 147  
148 148  dddd: address;
149 149  )))
150 -|(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
151 -|Q|QW|QW ddddd|0~~99999|
152 -|(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
153 -|MW|MW ddddd|0~~99999|(((
149 +|(% rowspan="8" %)Word|I|IW ddddd|0~~99999|
150 +|Q|QW ddddd|0~~99999|
151 +|(% rowspan="3" %)M|MB ddddd|0~~99999|
152 +|MW ddddd|0~~99999|(((
154 154  MW0=MB(0~~1)
155 155  
156 156  MW2=MB(2~~3)
... ... @@ -157,7 +157,7 @@
157 157  
158 158  Address value is a multiple of 2
159 159  )))
160 -|MD|MD ddddd|0~~99999|(((
159 +|MD ddddd|0~~99999|(((
161 161  MD0=MB(0~~3)
162 162  
163 163  MD4=MB(4~~7)
... ... @@ -164,49 +164,39 @@
164 164  
165 165  Address value is a multiple of 4
166 166  )))
167 -|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
166 +|(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
168 168  nn: block number;
169 169  
170 170  dddd: address
171 171  )))
172 -|DBxDBW|DBxDBW nndddd|0~~99999999
173 -|DBxDBD|DBxDBD nndddd|0~~99999999
171 +|DBxDBW nndddd|0~~99999999
172 +|DBxDBD nndddd|0~~99999999
174 174  
175 -**3）Configure the communication protocol**
174 +**Configure the communication protocol**
176 176  
177 -{{id name="Iimage-20220824161345-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
176 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
178 178  
179 -**4）Cable Wiring**
178 +**Cable Wiring**
180 180  
181 -{{id name="Iimage-20220824161450-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
180 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
182 182  
183 -== {{id name="HS7-1200A0Ethernet"/}}**S7-1200 Ethernet ** ==
182 +== **S7-1200 Ethernet ** ==
184 184  
185 185  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
186 186  
187 -== **S7-XXX Ethernet** ==
186 +**V-BOX Setting**
188 188  
189 -Supported Series: Siemens S7-400, S7-1200 and S7-1500
190 -
191 -**1）V-BOX setting**
192 -
193 -|=**Items**|=**Settings**|=**Note**
194 -|Protocol|Siemens S7-XXX|
188 +|**Items**|**Settings**|**Note**
189 +|Protocol|Siemens S7-1200|
195 195  |Connection|Ethernet|
196 196  |Port No.|102|
197 -|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
198 -|HMI No.|Rack (Default as 0)|
192 +|PLC station No.|2|
199 199  
200 -Slot from TIA Portal is equal to Device No. of V-net
194 +(% style="text-align:center" %)
195 +[[image:西门子1200协议参数.png]]
201 201  
202 -Rack from TIA Portal is equal to HMI No. of V-net
197 +**Address List**
203 203  
204 -{{id name="Iimage-20220824162459-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
205 -
206 -{{id name="Iimage-20220824163305-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
207 -
208 -**2）Address List**
209 -
210 210  |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
211 211  |(% rowspan="4" %)Bit|I|I|M d.o|(((
212 212  d:0~-~-9999
... ... @@ -285,18 +285,176 @@
285 285  Address value is a multiple of 4
286 286  )))
287 287  
288 -**3）Configure the communication protocol**
277 +{{info}}
278 +✎Note:
289 289  
290 -{{id name="Iimage-20220824163448-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
280 +* The S7-1200 supports simultaneous connection of three devices.
281 +* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
282 +* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
283 +* V-BOX operation character length needs to be set to 2 times the length of the Siemens character for proper display
284 +{{/info}}
291 291  
286 +**PLC Settings**
287 +
288 +Add BD
289 +
290 +* Please uncheck [Symbolic access only] option;
291 +
292 +(% style="text-align:center" %)
293 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
294 +
295 +Address settings, using BD2 as example.
296 +
297 +* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
298 +* 2 represent DB block number
299 +* xxxx represent address
300 +
301 +**Such as:**
302 +
303 +* DBxDBB20000 = DB2.DBB0
304 +* DBxDBW20004 = DB2.DBW4
305 +
306 +(% style="text-align:center" %)
307 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
308 +
309 +**How to connect with S7-1200 Firmware V4.0**
310 +
311 +PLC configuration
312 +
313 +* Double click [device configuration] in Siemens via software
314 +* Double click [protection] to enter protection configuration screen
315 +
316 +(% style="text-align:center" %)
317 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
318 +
319 +* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
320 +
321 +(% style="text-align:center" %)
322 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
323 +
324 +DB settings
325 +
326 +* Right click [DB], select [properties]
327 +* Uncheck [optimized block access]
328 +
329 +**Cable Wiring**
330 +
331 +(% style="text-align:center" %)
332 +[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
333 +
334 +== **S7-XXX Ethernet** ==
335 +
336 +Supported Series: Siemens S7-400, S7-1200 and S7-1500
337 +
338 +**V-BOX setting**
339 +
340 +|=**Items**|=**Settings**|=**Note**
341 +|Protocol|Siemens S7-XXX|
342 +|Connection|Ethernet|
343 +|Port No.|102|
344 +|Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
345 +|HMI No.|Rack (Default as 0)|
346 +
347 +Slot from TIA Portal is equal to Device No. of V-net
348 +
349 +Rack from TIA Portal is equal to HMI No. of V-net
350 +
351 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
352 +
353 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
354 +
355 +**Address List**
356 +
357 +|**Type**|**Device register**|**Format**|**Range**|**Note**
358 +|(% rowspan="4" %)Bit|I|M d.o|(((
359 +d:0~-~-9999
360 +
361 +o:0-7
362 +)))|
363 +|Q|Q d.o|(((
364 +d:0~-~-9999
365 +
366 +o:0-7
367 +)))|
368 +|M|M d.o|(((
369 +d:0~-~-9999
370 +
371 +o:0-7
372 +)))|
373 +|DB0.DB-DB99.DB|DBxDBnndddd.o|(((
374 +nn:0-9999,
375 +
376 +dddd:0-9999,
377 +
378 +o:0-7
379 +)))|(((
380 +nn:DB No.
381 +
382 +dddd:address value
383 +
384 +o: digit address
385 +)))
386 +|(% rowspan="8" %)Word|M|MB d|d:0-99999|
387 +|M|MW d|d:0-99999|(((
388 +MW0=MB(0~~1)
389 +
390 +MW2=MB(2~~3)
391 +
392 +Address value is a multiple of 2
393 +)))
394 +|M|MD d|d:0-99999|(((
395 +MD0=MB(0~~3)
396 +
397 +MD4=MB(4~~7)
398 +
399 +Address value is a multiple of 4
400 +)))
401 +|I|IW d|d:0-99999|
402 +|Q|QW d|d:0-99999|
403 +|DB0.DB-DB99.DB|DBxDBBnndddd|(((
404 +nn:0-9999
405 +
406 +dddd:0-9999
407 +)))|(((
408 +nn:DB No.
409 +
410 +dddd:address value
411 +)))
412 +|DB0.DB-DB99.DB|DBxDBWnndddd|(((
413 +nn:0-9999
414 +
415 +dddd:0-9999
416 +)))|(((
417 +nn:DB No.
418 +
419 +dddd:address value
420 +
421 +Address value is a multiple of 2
422 +)))
423 +|DB0.DB-DB99.DB|DBxDBDnndddd|(((
424 +nn:0-9999
425 +
426 +dddd:0-9999
427 +)))|(((
428 +nn:DB No.
429 +
430 +dddd:address value
431 +
432 +Address value is a multiple of 4
433 +)))
434 +
435 +**Configure the communication protocol**
436 +
437 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
438 +
292 292  **✎Note:**
293 293  
294 294  * The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
295 295  * V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
296 296  
297 -**4）Cable Wiring**
444 +**Cable Wiring**
298 298  
299 -{{id name="Iimage-20220824162342-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
446 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
300 300  
301 301  == {{id name="HLOGOEthernet"/}}**LOGO Ethernet ** ==
302 302  
... ... @@ -333,19 +333,19 @@
333 333  
334 334  Click [Tools]~-~-[Ethernet Connections],shown as below.
335 335  
336 -{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
483 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
337 337  
338 338  Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
339 339  
340 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
487 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
341 341  
342 342  **TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
343 343  
344 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
491 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
345 345  
346 346   **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
347 347  
348 -{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
495 +[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
349 349  
350 350  **V-BOX Communication Settings**
351 351  
1697099618537-157.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +36.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +107.1 KB
Content
西门子1200协议参数.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.AiXia
Size
... ... @@ -1,0 +1,1 @@
1 +64.6 KB
Content