Skip to Content

Changes for page Siemens

Last modified by Joe on 2024/08/30 14:46
From version 49.5
edited by Joe
on 2024/04/30 15:38
Change comment: There is no comment for this version
To version 45.1
edited by Theodore Xu
on 2023/10/12 16:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.AiXia
Content
... ... @@ -191,9 +191,6 @@
191 191  |Port No.|102|
192 192  |PLC station No.|2|
193 193  
194 -(% style="text-align:center" %)
195 -[[image:西门子1200协议参数.png]]
196 -
197 197  **Address List**
198 198  
199 199  |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
... ... @@ -274,84 +274,10 @@
274 274  Address value is a multiple of 4
275 275  )))
276 276  
277 -{{info}}
278 -✎Note:
274 +**Communication Settings**
279 279  
280 -* The S7-1200 supports simultaneous connection of three devices.
281 -* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
282 -* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
283 -{{/info}}
276 +Enable HMI Ethernet in [Project Settings]
284 284  
285 -**PLC Settings**
286 -
287 -Add BD
288 -
289 -* Please uncheck [Symbolic access only] option;
290 -
291 -(% style="text-align:center" %)
292 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
293 -
294 -Address settings, using BD2 as example.
295 -
296 -* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
297 -* 2 represent DB block number
298 -* xxxx represent address
299 -
300 -**Such as:**
301 -
302 -* DBxDBB20000 = DB2.DBB0
303 -* DBxDBW20004 = DB2.DBW4
304 -
305 -(% style="text-align:center" %)
306 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
307 -
308 -**How to setting String in PLC and V-net**
309 -PLC configuration
310 -
311 -choosing Data type~-~-String→add"[]" after String and input data length
312 -
313 -(% style="text-align:center" %)
314 -[[image:yUYuRVmMcL.png]]
315 -
316 -V-box configuration
317 -
318 -(% style="text-align:center" %)
319 -[[image:BSRBeEWL0O.png]]
320 -
321 -choosing Word and DBxDBW →input  Register Main No. →Data format is String →input data length you want to use → choosing Byte order~-~-Little-endian
322 -
323 -(% class="box infomessage" %)
324 -(((
325 -Note: Register Main No. = offset in PLC + 2
326 -For example, the image above has an offset of 4, so the register Main No. is 10006
327 -If an offset is 8, the register Main No. is 10010
328 -)))
329 -
330 -**How to connect with S7-1200 Firmware V4.0**
331 -
332 -PLC configuration
333 -
334 -* Double click [device configuration] in Siemens via software
335 -* Double click [protection] to enter protection configuration screen
336 -
337 -(% style="text-align:center" %)
338 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
339 -
340 -* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
341 -
342 -(% style="text-align:center" %)
343 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
344 -
345 -DB settings
346 -
347 -* Right click [DB], select [properties]
348 -* Uncheck [optimized block access]
349 -
350 -**Cable Wiring**
351 -
352 -(% style="text-align:center" %)
353 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
354 -
355 355  == **S7-XXX Ethernet** ==
356 356  
357 357  Supported Series: Siemens S7-400, S7-1200 and S7-1500
... ... @@ -501,47 +501,40 @@
501 501  
502 502  Click [Tools]~-~-[Ethernet Connections],shown as below.
503 503  
504 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
427 +{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
505 505  
506 506  Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
507 507  
508 -(% style="text-align:center" %)
509 -[[image:hXadxkZTuR.png]]
431 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
510 510  
511 -**TSAP set**: The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
433 +**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
512 512  
513 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
435 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
514 514  
515 515   **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
516 516  
517 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
439 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
518 518  
519 519  **V-BOX Communication Settings**
520 520  
521 521  Set PLC IP in [IP Address] settings;
522 522  
523 -(% style="text-align:center" %)
524 -[[image:V-NET_Client logo.png]]
445 +{{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png||alt="LldwDGntf4.png" height="530" width="899"]]
525 525  
447 +Enable V-BOX Ethernet in [Network];
448 +
449 +{{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png||alt="WgvjfWbQif.png" height="654" width="1195"]]
450 +
526 526  TSAP setting
527 527  
528 528  * The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
529 529  
530 -You can copy the following script into V-net directly.
531 -
532 -(% class="box successmessage" %)
533 -(((
534 534  **function** **init**.main()
535 535   addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
536 536   addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
537 537  **end**
538 -)))
539 539  
540 -(% class="box infomessage" %)
541 -(((
542 -Note:
543 -The name of the test script must be “init”, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
544 -)))
460 +Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
545 545  
546 546  **✎Note:**
547 547  
... ... @@ -552,4 +552,4 @@
552 552  ** Other set as defaulted.
553 553  * **Notes on the use of registers:**
554 554  ** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
555 -** Register VW: Use only registers they are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
471 +** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
BSRBeEWL0O.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
Ht1GZiel7c.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -56.3 KB
Content
V-NET_Client logo.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.4 KB
Content
V-NET_Client logo8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.4 KB
Content
hXadxkZTuR.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -57.5 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -96.9 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
yUYuRVmMcL.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
西门子1200协议参数.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -64.6 KB
Content