Skip to Content

Changes for page Siemens

Last modified by Joe on 2024/08/30 14:46
From version 51.1
edited by Joe
on 2024/06/11 18:41
Change comment: There is no comment for this version
To version 45.1
edited by Theodore Xu
on 2023/10/12 16:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.AiXia
Content
... ... @@ -191,9 +191,6 @@
191 191  |Port No.|102|
192 192  |PLC station No.|2|
193 193  
194 -(% style="text-align:center" %)
195 -[[image:西门子1200协议参数.png]]
196 -
197 197  **Address List**
198 198  
199 199  |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
... ... @@ -274,89 +274,10 @@
274 274  Address value is a multiple of 4
275 275  )))
276 276  
277 -{{info}}
278 -✎Note:
274 +**Communication Settings**
279 279  
280 -* The S7-1200 supports simultaneous connection of three devices.
281 -* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
282 -* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
283 -{{/info}}
276 +Enable HMI Ethernet in [Project Settings]
284 284  
285 -**PLC Settings**
286 -
287 -
288 -In the Project tree [PLC project]→Right-click[PLC-1]→[Properties]→[General]→[PROFINE interface]→[Add new subnet]→[IP address]192.168.40.20,[Subnet mask]255.255.255.0→[OK]
289 -
290 -(% style="text-align:center" %)
291 -[[image:图片1.png]]
292 -
293 -Open [Properties] again→[General]→[Protection&Security]→[Connection mechanisms]→Check [Permit access with PUTIGET communication remote partner ]→[OK]
294 -
295 -(% style="text-align:center" %)
296 -[[image:图片2.png]]
297 -
298 -
299 -Address settings, using BD2 as example.
300 -
301 -* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
302 -* 2 represent DB block number
303 -* xxxx represent address
304 -
305 -**Such as:**
306 -
307 -* DBxDBB20000 = DB2.DBB0
308 -* DBxDBW20004 = DB2.DBW4
309 -
310 -(% style="text-align:center" %)
311 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
312 -
313 -**How to setting String in PLC and V-net**
314 -PLC configuration
315 -
316 -choosing Data type~-~-String→add"[]" after String and input data length
317 -
318 -(% style="text-align:center" %)
319 -[[image:yUYuRVmMcL.png]]
320 -
321 -V-box configuration
322 -
323 -(% style="text-align:center" %)
324 -[[image:BSRBeEWL0O.png]]
325 -
326 -choosing Word and DBxDBW →input  Register Main No. →Data format is String →input data length you want to use → choosing Byte order~-~-Little-endian
327 -
328 -(% class="box infomessage" %)
329 -(((
330 -Note: Register Main No. = offset in PLC + 2
331 -For example, the image above has an offset of 4, so the register Main No. is 10006
332 -If an offset is 8, the register Main No. is 10010
333 -)))
334 -
335 -**How to connect with S7-1200 Firmware V4.0**
336 -
337 -PLC configuration
338 -
339 -* Double click [device configuration] in Siemens via software
340 -* Double click [protection] to enter protection configuration screen
341 -
342 -(% style="text-align:center" %)
343 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
344 -
345 -* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
346 -
347 -(% style="text-align:center" %)
348 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
349 -
350 -DB settings
351 -
352 -* Right click [DB], select [properties]
353 -* Uncheck [optimized block access]
354 -
355 -**Cable Wiring**
356 -
357 -(% style="text-align:center" %)
358 -[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
359 -
360 360  == **S7-XXX Ethernet** ==
361 361  
362 362  Supported Series: Siemens S7-400, S7-1200 and S7-1500
... ... @@ -506,48 +506,40 @@
506 506  
507 507  Click [Tools]~-~-[Ethernet Connections],shown as below.
508 508  
509 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
427 +{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
510 510  
511 511  Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
512 -
513 513  
514 -(% style="text-align:center" %)
515 -[[image:1iZSZTpAdk.png]]
431 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
516 516  
517 -**TSAP set**: The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite, shown as below.
433 +**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
518 518  
519 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
435 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
520 520  
521 521   **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
522 522  
523 -[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
439 +{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
524 524  
525 525  **V-BOX Communication Settings**
526 526  
527 527  Set PLC IP in [IP Address] settings;
528 528  
529 -(% style="text-align:center" %)
530 -[[image:V-NET_Client logo.png]]
445 +{{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png||alt="LldwDGntf4.png" height="530" width="899"]]
531 531  
447 +Enable V-BOX Ethernet in [Network];
448 +
449 +{{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png||alt="WgvjfWbQif.png" height="654" width="1195"]]
450 +
532 532  TSAP setting
533 533  
534 534  * The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
535 535  
536 -You can copy the following script into V-net directly.
537 -
538 -(% class="box successmessage" %)
539 -(((
540 540  **function** **init**.main()
541 541   addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
542 542   addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
543 543  **end**
544 -)))
545 545  
546 -(% class="box infomessage" %)
547 -(((
548 -Note:
549 -The name of the test script must be “init”, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
550 -)))
460 +Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
551 551  
552 552  **✎Note:**
553 553  
... ... @@ -558,4 +558,4 @@
558 558  ** Other set as defaulted.
559 559  * **Notes on the use of registers:**
560 560  ** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
561 -** Register VW: Use only registers they are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
471 +** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
1iZSZTpAdk.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
BSRBeEWL0O.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -30.0 KB
Content
Ht1GZiel7c.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -56.3 KB
Content
V-NET_Client logo.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.4 KB
Content
V-NET_Client logo8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -22.4 KB
Content
hXadxkZTuR.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -57.5 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -96.9 KB
Content
xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
yUYuRVmMcL.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -107.1 KB
Content
图片1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -143.2 KB
Content
图片2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -151.2 KB
Content
西门子1200协议参数.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -64.6 KB
Content