Wiki source code of Xinje

Version 9.1 by Theodore Xu on 2023/11/06 10:26

version	line-number	content
9.1	1	= XC serial =
2.1	2
9.1	3	Support Series: Xinjie XC Series
2.1	4
9.1	5	V-Box Settings
2.1	6
	7	\|Item\|Settings\|Note
	8	\|Protocol\|XINJE XC MODBUS\|
	9	\|Connection\|RS232\|
	10	\|Baud rate\|19200\|
	11	\|Data bit\|8\|
	12	\|Parity\|EVEN\|
	13	\|Stop bit\|1\|
	14	\|PLC station No.\|1\|
	15
9.1	16	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_848ef1522d877523.png\|\|alt="image-20220831163041-1.png" height="705" width="1676"]]
2.1	17
9.1	18	Address List
	19
2.1	20	\|Type\|Device registers\|HMI registers\|Format\|Range\|Note
	21	\|Bit\|M\|M\|M d\|0~~8511\|
	22	\|Bit\|X\|X\|X o\|0~~1747\|
	23	\|Bit\|Y\|Y\|Y o\|0~~1747\|
	24	\|Bit\|S\|S\|S d\|0~~1023\|
	25	\|Bit\|T\|T\|T d\|0~~4095\|
	26	\|Bit\|C\|C\|C d\|0~~634\|
	27	\|Word\|D\|D\|D d\|0~~8511\|
	28	\|Word\|TD\|TD\|TD d\|0~~618\|
	29	\|Word\|CD\|CD\|CD d\|0~~634\|
	30	\|Word\|FD\|FD\|FD d\|0~~8511\|
	31
9.1	32	PLC Settings
2.1	33
9.1	34	Create the new project, and select the specific model according to the actual PLC
2.1	35
9.1	36	(% style="text-align:center" %)
	37	[[image:XinjieXCcreatenew.png]]
2.1	38
9.1	39	Program the PLC
	40
	41	(% style="text-align:center" %)
	42	[[image:XinjieXCPrg.png]]
	43
	44	Connect PLC with PC through RS232-USB converter cable. Click [Option]-[Software Serial Port Config] to open the software connection setup window, and select the serial port, if the red text prompt "Connect To PLC Succeeded", which means the connection is setup successfully, then click OK to save the settings.
	45
	46	(% style="text-align:center" %)
	47	[[image:XinjieXCPCconn.png]]
	48
	49	Change the PLC communication setup if required. Double click the tree node [PLC Serial Port] from Project tree. And change Modbus parameters, then click [Write to PLC] and OK to finish.
	50
	51	(% style="text-align:center" %)
	52	[[image:XinjieXCPLCModbusConfig.png]]
	53
	54	Click [Online]-[Download Program] to download program into PLC. And the download pop up window would pop up, then click OK.
	55
	56	(% style="text-align:center" %)
	57	[[image:XinjieXCDownloadPLC.png]]
	58
	59	Cable Wiring
	60
2.1	61	Figure
	62
9.1	63	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_a14861f1794a6a42.png\|\|alt="image-20220831163406-2.png" height="266" width="101"]] [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_3e55283fe70031d.png\|\|alt="image-20220831163422-3.png" height="232" width="533"]]
2.1	64
	65	Pin Definition Diagram
	66
9.1	67	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_4e0c72812b72a12a.png\|\|alt="image-20220831163441-4.png" height="167" width="336"]]
2.1	68
9.1	69	== XD serial ==
2.1	70
9.1	71	V-Box Settings
2.1	72
	73	Supported Series: Xinjie XD/XE Series PLC
	74
	75	\|Item\|Settings\|Note
	76	\|Protocol\|XINJE XD/XC MODBUS\|
	77	\|Connection\|RS232\|
	78	\|Baud rate\|19200\|
	79	\|Data bit\|8\|
	80	\|Parity\|EVEN\|
	81	\|Stop bit\|1\|
	82	\|PLC station No.\|1\|
	83
9.1	84	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_2094eb9a27becb2c.png\|\|alt="image-20220831163923-7.png" height="709" width="1677"]]
2.1	85
9.1	86	Address List
	87
2.1	88	\|Type\|Device registers\|HMI registers\|Format\|Range\|Note
	89	\|Bit\|M\|M\|M d\|0~~74999\|
	90	\|Bit\|X1xx\|X1xx\|X1xx o\|0~~1177\|
	91	\|Bit\|X2xx\|X2xx\|X2xx o\|0~~277\|
	92	\|Bit\|X\|X\|X o\|0~~77\|
	93	\|Bit\|Y1xx\|Y1xx\|Y1xx o\|0~~1177\|
	94	\|Bit\|Y2xx\|Y2xx\|Y2xx o\|0~~277\|
	95	\|Bit\|Y\|Y\|Y o\|0~~4095\|
	96	\|Bit\|SM\|SM\|SM d\|0~~4999\|
	97	\|Bit\|T\|T\|T d\|0~~4999\|
	98	\|Bit\|C\|C\|C d\|0~~4999\|
	99	\|Bit\|ET\|ET\|ET d\|0~~31\|
	100	\|Bit\|SE\|SE\|SE d\|0~~31\|
	101	\|Bit\|HM\|HM\|HM d\|0~~11999\|
	102	\|Bit\|HSC\|HSC\|HSC d\|0~~39\|
	103	\|Bit\|HS\|HS\|HS d\|0~~999\|
	104	\|Bit\|HT\|HT\|HT d\|0~~1999\|
	105	\|Bit\|HC\|HC\|HC d\|0~~1999\|
	106	\|Bit\|S\|S\|S d\|0~~7999\|
	107	\|Word\|D\|D\|D d\|0~~69999\|
	108	\|Word\|ID\|ID\|ID d\|0~~99\|
	109	\|Word\|ID1xx\|ID1xx\|ID1xx d\|0~~999\|
	110	\|Word\|ID2xx\|ID2xx\|ID2xx d\|0~~299\|
	111	\|Word\|QD\|QD\|QD d\|0~~99\|
	112	\|Word\|QD1xx\|QD1xx\|QD1xx d\|0~~999\|
	113	\|Word\|QD2xx\|QD2xx\|QD2xx d\|0~~299\|
	114	\|Word\|SD\|SD\|SD d\|0~~4999\|
	115	\|Word\|TD\|TD\|TD d\|0~~575\|
	116	\|Word\|CD\|CD\|CD d\|0~~575\|
	117	\|Word\|ETD\|ETD\|ETD d\|0~~31\|
	118	\|Word\|HD\|HD\|HD d\|0~~24999\|
	119	\|Word\|HSD\|HSD\|HSD d\|0~~1023\|
	120	\|Word\|HTD\|HTD\|HTD d\|0~~95\|
	121	\|Word\|HCD\|HCD\|HCD d\|0~~95\|
	122	\|Word\|HSCD\|HSCD\|HSCD d\|0~~31\|
	123	\|Word\|FD\|FD\|FD d\|0~~8191\|
	124	\|Word\|SFD\|SFD\|SFD d\|0~~5999\|
	125	\|Word\|FS\|FS\|FS d\|0~~47\|
	126
9.1	127	PLC Settings
2.1	128
9.1	129	Create the new project, and select the specific model according to the actual PLC
2.1	130
9.1	131	(% style="text-align:center" %)
	132	[[image:XinjieXDcreatenew.png]]
2.1	133
9.1	134	Program the PLC
	135
	136	(% style="text-align:center" %)
	137	[[image:XinjieXDLDprg.png]]
	138
	139	Connect PLC with PC through RS232-USB converter cable. Click [Option]-[Software Serial Port Config]-[Communication configuration] to open the PC connection configuration.
	140
	141	(% style="text-align:center" %)
	142	[[image:XinjieXDopenSWcom (1).png]]
	143
	144	New a Modbus configuration, and Click [Comm-Test] to test connection, if shows "Connect To PLC Succeeded", which means PLC connection set up successfully. And click OK to save the settings.
	145
	146	(% style="text-align:center" %)
	147	[[image:XinjieXDPLCtestconn.png]]
	148
	149	Remember to click the Status cell of new created Modbus configuration for change the status into "in use", then click OK to exit.
	150
	151	(% style="text-align:center" %)
	152	[[image:XinjieXDclickto.png]]
	153
	154	After done the previous steps, it would prompt like the below.
	155
	156	(% style="text-align:center" %)
	157	[[image:XinjieXDsuccessprompt.png]]
	158
	159	Click [Online]-[Download Program & Data], and wait for a while, the pop up window would ask for whether to stop PLC, and click [Stop PLC, contitue download]
	160
	161	(% style="text-align:center" %)
	162	[[image:XinjieXDdownload.png]]
	163
	164	And then the XDPro ask for which options want to rewrite, and click OK to finish.
	165
	166	(% style="text-align:center" %)
	167	[[image:XinjieXDdownloadopt.png]]
	168
	169	If download successfully, it would prompt like the below.
	170
	171	(% style="text-align:center" %)
	172	[[image:XinjieXDcomplete.png]]
	173
	174	Cable Wiring
	175
2.1	176	Figure
	177
9.1	178	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_a14861f1794a6a42.png\|\|alt="image-20220831163406-2.png" height="266" width="101"]] [[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_a8ea42846b443604.png\|\|alt="image-20220831163553-6.png" height="206" width="465"]]
2.1	179
	180	Pin Definition Diagram
	181
9.1	182	[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220830160232-3.png?rev=1.1\|\|alt="image-20220830160232-3.png" height="218" width="709"]]

Wiki source code of Xinje

Navigation

Table of Contents