Skip to Content

Wiki source code of 2.10 System Management

Last modified by xingzhi lin on 2025/12/16 10:22
Hide last authors
Wecon 1.1 1 = 2.10 System Management =
2
3 == 2.10.1 Message push configuration ==
4
5 === 2.10.1.1 Email setting ===
6
7 **(1) Sender configuration**
8
9 **Enter SMTP settings: **used to configure the sender of the email push message, you need to enter the sender's email and other settings.
10
11 **Detect SMTP settings:** Enter the email address to be verified, and a test email will be sent to the email address to remind "SMTP settings successful".
12
xingzhi lin 4.1 13 [[image:1765850096263-807.png]]
Wecon 1.1 14
15 {{info}}
16 **Note:**
17
18 ①Since the validity of the test mailbox cannot be determined, please be sure to fill in the correct mailbox to ensure that the test email is received.
19
20 ②If the sending mailbox has a third-party SMTP configuration enabled, please obtain the authorization code and enter it in the password box.
21 {{/info}}
22
23 **(2) Detect email**
24
25 After configuring the sender's email address and other information, enter the test recipient's email address (which can be different from the sender's email address). If the configuration is correct, it will prompt "Email sent successfully, a test mail will be received in the test Email address". You can check the sent test email in the mailbox, as shown in the figure below.
26
xingzhi lin 4.1 27 [[image:1765850276151-541.png]]
Wecon 1.1 28
29 Please refer to the following table for common email servers and default port numbers:
30
31 (% style="width:1228.28px" %)
32 |=**Email**|=**Email server**|=(% style="width: 347px;" %)**Port number**
33 |163 mail|smtp.163.com|(% style="width:347px" %)465
34 |126 mail|smtp.126.com|(% style="width:347px" %)465
35 |QQ mail|smtp.qq.com|(% style="width:347px" %)465
36 |sina mail|smtp.sina.com|(% style="width:347px" %)465
37 |sohu mail|smtp.sohu.com|(% style="width:347px" %)465
38 |yahoo mail|smtp.mail.yahoo.com.cn|(% style="width:347px" %)465
39 |gmail|smtp.gmail.com|(% style="width:347px" %)465
40 |exmail|smtp.exmail.qq.com|(% style="width:347px" %)587
41
42 **(3) Recipient Email**
43
44 ①In the email configuration interface, click [Recipient Email] in the upper right corner.
45
xingzhi lin 4.1 46 [[image:1765850333659-299.png]]
Wecon 1.1 47
48 ②Add the "recipient email" of the current account, The added recipient email cannot be the same as the existing recipient mailbox, as shown in the figure below.
49
50 Name: length limit is 32 characters, character type is unlimited.
51
52 Recipient email: limit xxx@xxx.xxx format, length limit is 64 characters.
53
xingzhi lin 4.1 54 [[image:1765850377309-720.png]]
Wecon 1.1 55
56 You can search, edit, delete, enable, and disable the address book of the "recipient email" of the current account, as shown in the figure below.
57
58 (% style="text-align:center" %)
Devin Chen 2.1 59 [[image:PixPin_2025-10-30_16-32-21.png||alt="1744266582227-114.png"]]
Wecon 1.1 60
61 === 2.10.1.3 Push settings ===
62
63 Configure the platform push message method, as shown in the figure below.
64
xingzhi lin 4.1 65 [[image:1765850530794-617.png]]
Wecon 1.1 66
67 **Merge strategy: **adjust the push cycle of alarm messages (this setting is only valid for alarm message push). The instructions are as follows.
68
69 ①Merge strategy means pushing data within a specified interval at one time, which is only valid for alarm type strategies.
70
71 ②Delay time: After the V-Box reports the message, it will push the report again after the specified time (default 10s), which cannot be set to be greater than the notification frequency.
72
73 ③Notification frequency: The maximum time a message waits after being triggered.
74
xingzhi lin 4.1 75 [[image:1765850595574-519.png]]
Wecon 1.1 76
77 **Add strategy: **Add a new push strategy, configure the platform push message type and push method. The instructions are as follows.
78
79 ①Push method: trigger, period
80
81 ②Message type: alarm, maintenance and device status
82
83 ③Push channel: email
84
xingzhi lin 4.1 85 [[image:1765850636371-546.png]]
Wecon 1.1 86
87 **(1) Add strategy - Push method**
88
89 **1）Push method: Trigger**
90
91 **①Message type: alarm**
92
93 Select alarm monitoring points: supports cross-page and cross-device multi-selection, up to 10 monitoring points can be selected;
94
xingzhi lin 4.1 95 Alarm monitoring point alarm level: [[image:1765850651052-182.png]]red-particularly serious alarm, [[image:1765850660256-831.png]]orange-serious alarm, [[image:1765850665295-923.png]]theme color (the example image is cyan)-general alarm;
Wecon 1.1 96
97 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744269280379-416.png?width=1200&height=434&rev=1.1||alt="1744269280379-416.png" height="434" width="1200"]]
98
99 Select monitoring points, the interface description is as follows.
100
101 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744269734859-826.png?width=800&height=498&rev=1.1||alt="1744269734859-826.png" height="498" width="800"]]
102
103 **②Message type: maintenance**
104
105 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744270829956-913.png?width=1200&height=488&rev=1.1||alt="1744270829956-913.png" height="488" width="1200"]]
106
107 **③Message type: device status**
108
109 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744270966631-463.png?width=1200&height=488&rev=1.1||alt="1744270966631-463.png" height="488" width="1200"]]
110
111 **2）Push method: Period**
112
113 Periodic pushing: Every day - every hour, every week - Monday 08:00, every month - 1st 08:00, as shown in the figure below.
114
115 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272465316-183.png?width=800&height=428&rev=1.1||alt="1744272465316-183.png" height="428" width="800"]]
116
117 **(1) Add strategy - Push channel**
118
119
120 **Push channel: Email**
121
122 Check the [Email] selection button, add the content to be pushed by email, click the[[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272532639-105.png?rev=1.1||alt="1744272532639-105.png"]]button, and select the "Email Recipients" list, as shown below. (If there is no list, please add it in [Mail Configuration])
123
124 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272532640-904.png?rev=1.1||alt="1744272532640-904.png"]]: Insert the "bit address" and "word address" in the email.
125
126 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744273735494-348.png?width=1200&height=502&rev=1.1||alt="1744273735494-348.png" height="502" width="1200"]]
127
Devin Chen 3.1 128 {{info}}
129 Note:
130
131 Due to system and device mechanisms, for real-time tags selected in this config, data can only be guaranteed to update accurately when a device (PC client/Webpage/APP/Cloud SCADA, etc.) actively accesses them. Please use this function under this premise.
132 {{/info}}
133
Wecon 1.1 134 == 2.10.2 System log ==
135
136 Log management consists of: operation log + device operation log. Sensitive operations such as control, modification, setting, and login are stored, and statistics are accurate to events and people. Operation logs can also be exported, which helps decision makers better analyze.
137
138 **Purpose of log management;**
139
140 * Evidence traces. When there are multiple users operating the system, disputes are bound to arise. At this time, logs come in handy to accurately determine responsibility.
141 * Troubleshooting. Bugs that occur during device operation and problems that occur during use often cannot be reproduced. In this case, R&D personnel can troubleshoot and locate the problem by retrieving device logs.
142 * Analyze user behavior and optimize system design to make it more in line with user habits.
143
144 === 2.10.2.1 Operation log ===
145
146 Record user operation logs: XX user's "login/exit, new, modify, delete, import/export" operations, as well as the status display of successful and failed modifications, as shown in the figure below.
147
xingzhi lin 6.1 148 [[image:1765851079726-664.png]]
Wecon 1.1 149
150 === 2.10.2.2 Device running log ===
151
152 Record the operation log of the device: the operation of "device status, device instruction, device configuration" of XX device, as well as the status display of successful and failed modification, as shown in the figure below.
153
xingzhi lin 5.1 154 [[image:1765851015353-571.png]]
Wecon 1.1 155
156 === 2.10.4 System function ===
157
158 The system function is used to view the role function permissions of the current account.
159
160 (% style="text-align:center" %)
161 [[image:1747895670714-207.png||height="609" width="1200"]]
162
Devin Chen 2.1 163 == ==
Wecon 1.1 164
165 == 2.10.4 System function ==
166
167 The system function is used to view the role function permissions of the current account.
168
xingzhi lin 6.1 169 [[image:1765851123982-801.png]]
Wecon 1.1 170
171 == 2.10.5 Third party service ==
172
173 === 2.10.5.1 EZVIZ configuration ===
174
175 EZVIZ configuration: Configure the EZVIZ Cloud related content used in the current account, such as large screen monitoring in large screen monitoring and video components in cloud SCADA. The current functions include: operations on EZVIZ accounts and operations on EZVIZ Cloud devices. Among them, operations on EZVIZ Cloud accounts include: adding, editing, and unbinding.
176
177 ===== （1）Add account =====
178
179 Click the [+Add Account] button and enter the alias, correct appKey and appSecret in the pop-up window, as shown in the figure below.
180
xingzhi lin 6.1 181 [[image:1765851183065-193.png]]
Wecon 1.1 182
183 ===== （2）Get the EZVIZ Cloud key =====
184
185 "appKey and appSecret" need to log in to the EZVIZ Cloud account, and after registration, obtain the application key in the application information. (Subject to the actual operation process of the EZVIZ Cloud platform)
186
187 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380675-479.png?rev=1.1||alt="1744697380675-479.png"]]
188
189 ===== （3）Add EZVIZ Cloud device =====
190
191 Click on the device list to view or add EZVIZ cloud devices.
192
193 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380688-507.png?rev=1.1||alt="1744697380688-507.png"]]
194
195 Click [+Add Device] and fill in the "Serial Number and Verification Code" of the EZVIZ Cloud Camera Base, as shown in the figure below.
196
197 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380689-197.png?rev=1.1||alt="1744697380689-197.png"]]
198
199 == 2.10.6 System configuration ==
200
201 System configuration-device configuration. It is more convenient to set the device history data statistics. Support various filtering conditions and one-key opening function. You can open history statistics for both V-Box and HMI.
202
203 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697475146-382.png?rev=1.1||alt="1744697475146-382.png"]]
204
205 == 2.10.7 Menu manage ==
206
207 The menu management page is designed to help users configure custom sidebar menus. It supports creating multiple custom menus and assigning menus to sub-accounts.
208
xingzhi lin 6.1 209 [[image:1765851249099-799.png]]
Wecon 1.1 210
211 === 2.10.7.1 Add menu ===
212
213 ①Click the "Add custom menu" button in the upper left corner, as shown in the figure below, to enter the operation of adding a new menu.
214
xingzhi lin 6.1 215 [[image:1765851278523-834.png]]
Wecon 1.1 216
217 ②A pop-up window will appear on the right, where you can define the custom menu name and menu description first.
218
xingzhi lin 6.1 219 [[image:1765851298373-158.png]]
Wecon 1.1 220
221 ②Click on a specific menu item to enter the modification of the menu item name, as shown in the figure below.
222
xingzhi lin 6.1 223 (% style="text-align:center" %)
224 [[image:1765851352776-407.png]]
Wecon 1.1 225
226 ③Click the icon on the right side of the menu item to open the icon settings pop-up window. Click the icon in the pop-up window to modify the icon of the menu item, as shown in the figure below.
227
xingzhi lin 6.1 228 [[image:1765851494934-585.png]]
Wecon 1.1 229
230 ③Click the checkbox on the left side of the menu item to switch whether the menu item is displayed in the sidebar (check to display, uncheck to hide), as shown in the figure below.
231
xingzhi lin 6.1 232 (% style="text-align:center" %)
233 [[image:1765851549101-267.png]]
Wecon 1.1 234
235 ④Click the switch button on the right to enter the modification state of the menu item name in another language (currently only Chinese and English are supported), as shown in the figure below.
236
xingzhi lin 6.1 237 (% style="text-align:center" %)
238 [[image:1765851593518-805.png]]
Wecon 1.1 239
240 ④Click the "Confirm" button in the lower right corner of the new custom menu to complete, as shown in the figure below.
241
xingzhi lin 6.1 242 [[image:1765851643483-354.png]]
Wecon 1.1 243
244 === 2.10.7.2 Modify menu ===
245
246 The custom menu will be displayed on the page in the form of a card. The first menu displays the default menu of the platform, which cannot be modified or deleted. Click the "Enter to modify" button on the menu card to modify the menu content.
247
xingzhi lin 6.1 248 [[image:1765851669145-614.png]]
Wecon 1.1 249
250 === 2.10.7.3 Switch menu ===
251
252 Click the "Click to activate " button in the upper right corner of the menu card to switch the menu, as shown in the figure below.
253
xingzhi lin 6.1 254 [[image:1765851691578-271.png]]
Wecon 1.1 255
256 === 2.10.7.4 Delete menu ===
257
258 Click the "Delete menu" button on the menu card to delete the menu.
259
xingzhi lin 6.1 260 [[image:1765851710045-597.png]]
Wecon 1.1 261
262 === 2.10.7.5 Assign menu ===
263
264 In the Role management tab under the User manage page, when editing a role, you can assign the custom menu created by the current user to the sub-account, as shown in the figure below.
265
xingzhi lin 6.1 266 [[image:1765851746758-524.png]]