Skip to Content

Wiki source code of 2.10 System Management

Last modified by Devin Chen on 2025/12/10 11:44
Show last authors
1 = 2.10 System Management =
2
3 == 2.10.1 Message push configuration ==
4
5 === 2.10.1.1 Email setting ===
6
7 **(1) Sender configuration**
8
9 **Enter SMTP settings: **used to configure the sender of the email push message, you need to enter the sender's email and other settings.
10
11 **Detect SMTP settings:** Enter the email address to be verified, and a test email will be sent to the email address to remind "SMTP settings successful".
12
13 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744265361411-832.png?width=1200&height=582&rev=1.1||alt="1744265361411-832.png" height="582" width="1200"]]
14
15 {{info}}
16 **Note:**
17
18 ①Since the validity of the test mailbox cannot be determined, please be sure to fill in the correct mailbox to ensure that the test email is received.
19
20 ②If the sending mailbox has a third-party SMTP configuration enabled, please obtain the authorization code and enter it in the password box.
21 {{/info}}
22
23 **(2) Detect email**
24
25 After configuring the sender's email address and other information, enter the test recipient's email address (which can be different from the sender's email address). If the configuration is correct, it will prompt "Email sent successfully, a test mail will be received in the test Email address". You can check the sent test email in the mailbox, as shown in the figure below.
26
27 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744265770159-894.png?width=1200&height=582&rev=1.1||alt="1744265770159-894.png" height="582" width="1200"]]
28
29 Please refer to the following table for common email servers and default port numbers:
30
31 (% style="width:1228.28px" %)
32 |=**Email**|=**Email server**|=(% style="width: 347px;" %)**Port number**
33 |163 mail|smtp.163.com|(% style="width:347px" %)465
34 |126 mail|smtp.126.com|(% style="width:347px" %)465
35 |QQ mail|smtp.qq.com|(% style="width:347px" %)465
36 |sina mail|smtp.sina.com|(% style="width:347px" %)465
37 |sohu mail|smtp.sohu.com|(% style="width:347px" %)465
38 |yahoo mail|smtp.mail.yahoo.com.cn|(% style="width:347px" %)465
39 |gmail|smtp.gmail.com|(% style="width:347px" %)465
40 |exmail|smtp.exmail.qq.com|(% style="width:347px" %)587
41
42 **(3) Recipient Email**
43
44 ①In the email configuration interface, click [Recipient Email] in the upper right corner.
45
46 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744265893724-966.png?width=1200&height=122&rev=1.1||alt="1744265893724-966.png" height="122" width="1200"]]
47
48 ②Add the "recipient email" of the current account, The added recipient email cannot be the same as the existing recipient mailbox, as shown in the figure below.
49
50 Name: length limit is 32 characters, character type is unlimited.
51
52 Recipient email: limit xxx@xxx.xxx format, length limit is 64 characters.
53
54 (% style="text-align:center" %)
55 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744265969679-781.png?width=1200&height=283&rev=1.1||alt="1744265969679-781.png" height="283" width="1200"]]
56
57 You can search, edit, delete, enable, and disable the address book of the "recipient email" of the current account, as shown in the figure below.
58
59 (% style="text-align:center" %)
60 [[image:PixPin_2025-10-30_16-32-21.png||alt="1744266582227-114.png"]]
61
62 === 2.10.1.3 Push settings ===
63
64 Configure the platform push message method, as shown in the figure below.
65
66 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744266973281-342.png?width=1200&height=380&rev=1.1||alt="1744266973281-342.png" height="380" width="1200"]]
67
68 **Merge strategy: **adjust the push cycle of alarm messages (this setting is only valid for alarm message push). The instructions are as follows.
69
70 ①Merge strategy means pushing data within a specified interval at one time, which is only valid for alarm type strategies.
71
72 ②Delay time: After the V-Box reports the message, it will push the report again after the specified time (default 10s), which cannot be set to be greater than the notification frequency.
73
74 ③Notification frequency: The maximum time a message waits after being triggered.
75
76 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744267054630-929.png?width=1200&height=378&rev=1.1||alt="1744267054630-929.png" height="378" width="1200"]]
77
78 **Add strategy: **Add a new push strategy, configure the platform push message type and push method. The instructions are as follows.
79
80 ①Push method: trigger, period
81
82 ②Message type: alarm, maintenance and device status
83
84 ③Push channel: email
85
86 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744267128636-856.png?width=1200&height=582&rev=1.1||alt="1744267128636-856.png" height="582" width="1200"]]
87
88 **(1) Add strategy - Push method**
89
90 **1）Push method: Trigger**
91
92 **①Message type: alarm**
93
94 Select alarm monitoring points: supports cross-page and cross-device multi-selection, up to 10 monitoring points can be selected;
95
96 Alarm monitoring point alarm level: [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744267147810-575.png?rev=1.1||alt="1744267147810-575.png"]]red-particularly serious alarm, [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744267147811-888.png?rev=1.1||alt="1744267147811-888.png"]]orange-serious alarm, [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744267147811-274.png?rev=1.1||alt="1744267147811-274.png"]]theme color (the example image is cyan)-general alarm;
97
98 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744269280379-416.png?width=1200&height=434&rev=1.1||alt="1744269280379-416.png" height="434" width="1200"]]
99
100 Select monitoring points, the interface description is as follows.
101
102 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744269734859-826.png?width=800&height=498&rev=1.1||alt="1744269734859-826.png" height="498" width="800"]]
103
104 **②Message type: maintenance**
105
106 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744270829956-913.png?width=1200&height=488&rev=1.1||alt="1744270829956-913.png" height="488" width="1200"]]
107
108 **③Message type: device status**
109
110 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744270966631-463.png?width=1200&height=488&rev=1.1||alt="1744270966631-463.png" height="488" width="1200"]]
111
112 **2）Push method: Period**
113
114 Periodic pushing: Every day - every hour, every week - Monday 08:00, every month - 1st 08:00, as shown in the figure below.
115
116 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272465316-183.png?width=800&height=428&rev=1.1||alt="1744272465316-183.png" height="428" width="800"]]
117
118 **(1) Add strategy - Push channel**
119
120
121 **Push channel: Email**
122
123 Check the [Email] selection button, add the content to be pushed by email, click the[[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272532639-105.png?rev=1.1||alt="1744272532639-105.png"]]button, and select the "Email Recipients" list, as shown below. (If there is no list, please add it in [Mail Configuration])
124
125 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744272532640-904.png?rev=1.1||alt="1744272532640-904.png"]]: Insert the "bit address" and "word address" in the email.
126
127 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744273735494-348.png?width=1200&height=502&rev=1.1||alt="1744273735494-348.png" height="502" width="1200"]]
128
129 {{info}}
130 Note:
131
132 Due to system and device mechanisms, for real-time tags selected in this config, data can only be guaranteed to update accurately when a device (PC client/Webpage/APP/Cloud SCADA, etc.) actively accesses them. Please use this function under this premise.
133 {{/info}}
134
135 == 2.10.2 System log ==
136
137 Log management consists of: operation log + device operation log. Sensitive operations such as control, modification, setting, and login are stored, and statistics are accurate to events and people. Operation logs can also be exported, which helps decision makers better analyze.
138
139 **Purpose of log management;**
140
141 * Evidence traces. When there are multiple users operating the system, disputes are bound to arise. At this time, logs come in handy to accurately determine responsibility.
142 * Troubleshooting. Bugs that occur during device operation and problems that occur during use often cannot be reproduced. In this case, R&D personnel can troubleshoot and locate the problem by retrieving device logs.
143 * Analyze user behavior and optimize system design to make it more in line with user habits.
144
145 === 2.10.2.1 Operation log ===
146
147 Record user operation logs: XX user's "login/exit, new, modify, delete, import/export" operations, as well as the status display of successful and failed modifications, as shown in the figure below.
148
149 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744274132973-404.png?width=1200&height=582&rev=1.1||alt="1744274132973-404.png" height="582" width="1200"]]
150
151 === 2.10.2.2 Device running log ===
152
153 Record the operation log of the device: the operation of "device status, device instruction, device configuration" of XX device, as well as the status display of successful and failed modification, as shown in the figure below.
154
155 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744274521381-774.png?width=1200&height=582&rev=1.1||alt="1744274521381-774.png" height="582" width="1200"]]
156
157 === 2.10.4 System function ===
158
159 The system function is used to view the role function permissions of the current account.
160
161 (% style="text-align:center" %)
162 [[image:1747895670714-207.png||height="609" width="1200"]]
163
164 == ==
165
166 == 2.10.4 System function ==
167
168 The system function is used to view the role function permissions of the current account.
169
170 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744274977249-728.png?width=1200&height=582&rev=1.1||alt="1744274977249-728.png" height="582" width="1200"]]
171
172 == 2.10.5 Third party service ==
173
174 === 2.10.5.1 EZVIZ configuration ===
175
176 EZVIZ configuration: Configure the EZVIZ Cloud related content used in the current account, such as large screen monitoring in large screen monitoring and video components in cloud SCADA. The current functions include: operations on EZVIZ accounts and operations on EZVIZ Cloud devices. Among them, operations on EZVIZ Cloud accounts include: adding, editing, and unbinding.
177
178 ===== （1）Add account =====
179
180 Click the [+Add Account] button and enter the alias, correct appKey and appSecret in the pop-up window, as shown in the figure below.
181
182 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380672-520.png?rev=1.1||alt="1744697380672-520.png"]]
183
184 ===== （2）Get the EZVIZ Cloud key =====
185
186 "appKey and appSecret" need to log in to the EZVIZ Cloud account, and after registration, obtain the application key in the application information. (Subject to the actual operation process of the EZVIZ Cloud platform)
187
188 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380675-479.png?rev=1.1||alt="1744697380675-479.png"]]
189
190 ===== （3）Add EZVIZ Cloud device =====
191
192 Click on the device list to view or add EZVIZ cloud devices.
193
194 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380688-507.png?rev=1.1||alt="1744697380688-507.png"]]
195
196 Click [+Add Device] and fill in the "Serial Number and Verification Code" of the EZVIZ Cloud Camera Base, as shown in the figure below.
197
198 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697380689-197.png?rev=1.1||alt="1744697380689-197.png"]]
199
200 == 2.10.6 System configuration ==
201
202 System configuration-device configuration. It is more convenient to set the device history data statistics. Support various filtering conditions and one-key opening function. You can open history statistics for both V-Box and HMI.
203
204 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744697475146-382.png?rev=1.1||alt="1744697475146-382.png"]]
205
206 == 2.10.7 Menu manage ==
207
208 The menu management page is designed to help users configure custom sidebar menus. It supports creating multiple custom menus and assigning menus to sub-accounts.
209
210 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744353289337-109.png?width=1200&height=582&rev=1.1||alt="1744353289337-109.png" height="582" width="1200"]]
211
212 === 2.10.7.1 Add menu ===
213
214 ①Click the "Add custom menu" button in the upper left corner, as shown in the figure below, to enter the operation of adding a new menu.
215
216 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744353708531-753.png?width=1200&height=281&rev=1.1||alt="1744353708531-753.png" height="281" width="1200"]]
217
218 ②A pop-up window will appear on the right, where you can define the custom menu name and menu description first.
219
220 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744353755052-131.png?width=1200&height=582&rev=1.1||alt="1744353755052-131.png" height="582" width="1200"]]
221
222 ②Click on a specific menu item to enter the modification of the menu item name, as shown in the figure below.
223
224 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744353992101-802.png?width=800&height=654&rev=1.1||alt="1744353992101-802.png" height="654" width="800"]]
225
226 ③Click the icon on the right side of the menu item to open the icon settings pop-up window. Click the icon in the pop-up window to modify the icon of the menu item, as shown in the figure below.
227
228 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744354282041-898.png?width=1200&height=582&rev=1.1||alt="1744354282041-898.png" height="582" width="1200"]]
229
230 ③Click the checkbox on the left side of the menu item to switch whether the menu item is displayed in the sidebar (check to display, uncheck to hide), as shown in the figure below.
231
232 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744354411448-979.png?width=400&height=969&rev=1.1||alt="1744354411448-979.png" height="969" width="400"]]
233
234 ④Click the switch button on the right to enter the modification state of the menu item name in another language (currently only Chinese and English are supported), as shown in the figure below.
235
236 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744354594094-986.png?width=400&height=647&rev=1.1||alt="1744354594094-986.png" height="647" width="400"]]
237
238 ④Click the "Confirm" button in the lower right corner of the new custom menu to complete, as shown in the figure below.
239
240 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744355865835-762.png?width=400&height=648&rev=1.1||alt="1744355865835-762.png" height="648" width="400"]]
241
242 === 2.10.7.2 Modify menu ===
243
244 The custom menu will be displayed on the page in the form of a card. The first menu displays the default menu of the platform, which cannot be modified or deleted. Click the "Enter to modify" button on the menu card to modify the menu content.
245
246 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744355934585-722.png?width=400&height=566&rev=1.1||alt="1744355934585-722.png" height="566" width="400"]]
247
248 === 2.10.7.3 Switch menu ===
249
250 Click the "Click to activate " button in the upper right corner of the menu card to switch the menu, as shown in the figure below.
251
252 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744361733623-600.png?width=1200&height=582&rev=1.1||alt="1744361733623-600.png" height="582" width="1200"]]
253
254 === 2.10.7.4 Delete menu ===
255
256 Click the "Delete menu" button on the menu card to delete the menu.
257
258 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744361797045-916.png?width=400&height=838&rev=1.1||alt="1744361797045-916.png" height="838" width="400"]]
259
260 === 2.10.7.5 Assign menu ===
261
262 In the Role management tab under the User manage page, when editing a role, you can assign the custom menu created by the current user to the sub-account, as shown in the figure below.
263
264 [[image:https://docs.we-con.com.cn/bin/download/V-Net%202.0/Operation%20Manual/Platform%20Service/WebHome/1744361868807-458.png?width=1200&height=582&rev=1.1||alt="1744361868807-458.png" height="582" width="1200"]]