Wiki source code of 11 VB connect Permanent magnet synchronous motor
Last modified by xingzhi lin on 2026/04/24 09:58
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="box infomessage" %) | ||
| 2 | ((( | ||
| 3 | ✎Note: The inverter needs to **download the firmware version first**, after the firmware version download is completed, the inverter **can only connect to permanent magnet synchronous motors**, can't connect to asynchronous motors, and **can only use the svc mode (F0.00=0)**, the **maximum frequency** can't be more than **300HZ.** | ||
| 4 | ))) | ||
| 5 | |||
| 6 | == == | ||
| 7 | |||
| 8 | == Motor self-learning == | ||
| 9 | |||
| 10 | * F0.00=0 | ||
| 11 | * F0.01=0 | ||
| 12 | * F2.00=2 | ||
| 13 | * F2.01-F2.05(Check the motor nameplate) | ||
| 14 | * F2.11=13 synchronous motor stationary tuning (calculate the reverse potential), **TUNE appears to press RUN**, wait for the self-learning is completed. | ||
| 15 | * Check the parameters F2.16-F2.20. |