Changes for page 09 Function code

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • 1763023714773-291.png
  • 1763024398600-482.png
  • 1763026906844-539.png

Details

Page properties

Content

...	...	@@ -1,4 +1,4 @@
1		-**F0 group basic function group**
	1	+== **F0 group basic function group** ==
2	2
3	3	|(% rowspan="2" style="text-align:center" %)F0.00|(% style="text-align:center" %)Motor control mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
4	4	|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
...	...	@@ -128,13 +128,13 @@
128	128	The secondary frequency source Y is used in the same way as the primary frequency source X when it is used as an independent frequency given channel (that is, the frequency source selected to switch from X to Y).
129	129
130	130	|(% rowspan="2" style="text-align:center" %)F0.05|(% style="width:344px" %)The auxiliary frequency source Y range is selected during superposition|(% style="text-align:center; width:142px" %)Factory default|(% style="text-align:center" %)0
131		-|(% style="width:344px" %)Setting range|(% colspan="2" style="width:228px" %)(((
	131	+|(% style="text-align:center; width:344px" %)Setting range|(% colspan="2" style="width:228px" %)(((
132	132	0: Relative to the maximum frequency  F0.10
133	133
134	134	1: Relative to the frequency source X
135	135	)))
136		-|(% rowspan="2" style="text-align:center" %)F0.06|(% style="width:344px" %)Auxiliary frequency source Y range in superposition|(% style="text-align:center; width:142px" %)Factory default|100%
137		-|(% style="width:344px" %)Setting range|(% colspan="2" style="text-align:center; width:228px" %)0% to 150%
	136	+|(% rowspan="2" style="text-align:center" %)F0.06|(% style="width:344px" %)Auxiliary frequency source Y range in superposition|(% style="text-align:center; width:142px" %)Factory default|(% style="text-align:center" %)100%
	137	+|(% style="text-align:center; width:344px" %)Setting range|(% colspan="2" style="text-align:center; width:228px" %)0% to 150%
138	138
139	139	When the frequency source is selected as a frequency stack (F0.07 is set to 1, 3, or 4), it is used to determine the adjustment range of the auxiliary frequency source. F0.05 is used to determine the object relative to the range, if it is relative to the maximum frequency (F0.10), the range is a fixed value; If it is relative to the primary frequency source X, its range will change as the primary frequency source X changes.
140	140
...	...	@@ -169,7 +169,7 @@
169	169
170	170	When the auxiliary frequency source for digital or pulse potentiometer timing, preset frequency (F0.08) does not work, through the keyboard ▲/▼ key (or multi-function input terminal UP, DOWN) can be adjusted on the basis of the main given frequency.
171	171
172		-When the auxiliary frequency source is given as an analog input (AI1, AI2) or a pulse input, 100% of the input setting corresponds to the auxiliary frequency source range (see F0.05 and F0.06 instructions). If you need to adjust up or down from the main given frequency, set the analog input to a range of.n% to +n%.
	172	+When the auxiliary frequency source is given as an analog input (AI1, AI2) or a pulse input, 100% of the input setting corresponds to the auxiliary frequency source range (see F0.05 and F0.06 instructions). If you need to adjust up or down from the main given frequency, set the analog input to a range of n% to +n%.
173	173
174	174	The frequency source is timed for pulse input, similar to analog quantity setting.
175	175
...	...	@@ -265,11 +265,11 @@
265	265
266	266	The effect of adjusting the carrier frequency on the following performance:
267	267
268		-|(% style="text-align:center" %)Carrier frequency|(% style="text-align:center" %)Low[[image:1763022484807-191.png]]High
	268	+|(% style="text-align:center" %)Carrier frequency|(% style="text-align:center" %)Low [[image:1763022484807-191.png]] High
269	269	|(% style="text-align:center" %)Motor noise|(% style="text-align:center" %)High [[image:1763022495845-910.png]] Low
270		-|(% style="text-align:center" %)The output current waveform|(% style="text-align:center" %)Worse[[image:1763022525597-175.png]]Better
271		-|(% style="text-align:center" %)Temperature rise in electric motors|(% style="text-align:center" %)High[[image:1763022595008-156.png]]Low
272		-|(% style="text-align:center" %)VFD temperature rise|(% style="text-align:center" %)Low[[image:1763022599082-487.png]]High
	270	+|(% style="text-align:center" %)The output current waveform|(% style="text-align:center" %)Worse [[image:1763022525597-175.png]] Better
	271	+|(% style="text-align:center" %)Temperature rise in electric motors|(% style="text-align:center" %)High [[image:1763022595008-156.png]] Low
	272	+|(% style="text-align:center" %)VFD temperature rise|(% style="text-align:center" %)Low [[image:1763022599082-487.png]] High
273	273	|(% style="text-align:center" %)Leak current|(% style="text-align:center" %)Low[[image:1763022602360-885.png]]High
274	274	|(% style="text-align:center" %)External radiation interference|(% style="text-align:center" %)Low[[image:1763022605234-199.png]]High
275	275
...	...	@@ -318,7 +318,7 @@
318	318
319	319	When the output frequency is low, reducing the PWM carrier can increase the low frequency starting torque and reduce the electromagnetic interference during starting. When the bit is 1, the program automatically reduces the PWM carrier when the output frequency is low.
320	320
321		-Hundreds palce: Random PWM depth
	321	+Hundreds place: Random PWM depth
322	322
323	323	In order to make the motor noise spectrum flatter, you can turn on the random PWM function, after the function is turned on, the PWM carrier is no longer a fixed value, but fluctuates around the F0.16 set carrier. When the bit is not 0, the random PWM function works. The larger the value, the wider the fluctuation range and the flatter the noise spectrum. It should be noted that after opening the random carrier, the electromagnetic noise of the motor will not necessarily be reduced, and the actual noise perception varies from person to person.
324	324
...	...	@@ -332,8 +332,8 @@
332	332
333	333	(% style="text-align:center" %)
334	334	(((
335		-(% style="display:inline-block" %)
336		-[[Figure 9-0-1 Acceleration and deceleration time>>image:1763022803632-610.png]]
	335	+(% style="display:inline-block; width:616px;" %)
	336	+[[Figure 9-0-1 Acceleration and deceleration time>>image:1763022803632-610.png||height="370" width="616"]]
337	337	)))
338	338
339	339	Note the difference between the actual acceleration and deceleration time and the set acceleration and deceleration time.
...	...	@@ -352,9 +352,9 @@
352	352
353	353	|(% rowspan="2" style="text-align:center" %)F0.20|(% style="text-align:center" %)Parameter initialization|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
354	354	|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
355		-0: No opreration
	355	+0: No operation
356	356
357		-1: Restore factorydefault (Do not restore motor parameters)
	357	+1: Restore factory default (Do not restore motor parameters)
358	358
359	359	2: Clear the record information
360	360
...	...	@@ -384,8 +384,8 @@
384	384
385	385	Note the following function codes: F0.18, F0.19, F8.01, F8.02, F8.03, F8.04, F8.05, F8.06, F8.07, F8.08.
386	386
387		-|(% rowspan="2" %)F0.24|Acceleration and deceleration time reference frequency|Factory default|0
388		-|Setting range|(% colspan="2" %)(((
	387	+|(% rowspan="2" style="text-align:center" %)F0.24|(% style="text-align:center; width:382px" %)Acceleration and deceleration time reference frequency|(% style="text-align:center; width:147px" %)Factory default|(% style="text-align:center; width:33px" %)0
	388	+|(% style="text-align:center; width:382px" %)Setting range|(% colspan="2" style="width:180px" %)(((
389	389	0: Maximum frequency (F0.10)
390	390
391	391	1: Set the frequency
...	...	@@ -397,7 +397,7 @@
397	397
398	398	|(% rowspan="2" style="text-align:center" %)F0.25|(% style="text-align:center" %)Fan control|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)01
399	399	|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
400		-One place: start/stop control
	400	+One place: Start/stop control
401	401
402	402	0: The fan runs after the inverter is powered on
403	403
...	...	@@ -420,7 +420,6 @@
420	420
421	421	Speed control: Below 45°C: Operate at 50% speed; From 45°C to 50°C: Operate at 75% speed; At 50°C and above: Operate at 100% speed.
422	422
423		-
424	424	|(% rowspan="2" style="text-align:center" %)F0.26|(% style="text-align:center" %)Frequency command decimal point|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2
425	425	|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
426	426	1: 1 decimal places
...	...	@@ -430,7 +430,7 @@
430	430
431	431	This parameter is not restored when restoring factory defaults.
432	432
433		-|(% rowspan="2" style="text-align:center" %)F0.27|(% style="text-align:center" %)Modulation ratio coefficient|(% style="text-align:center" %)Factory default|100.0%
	432	+|(% rowspan="2" style="text-align:center" %)F0.27|(% style="text-align:center" %)Modulation ratio coefficient|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
434	434	|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)10.0 to 150.0%
435	435
436	436	This parameter is the upper limit of the modulation ratio. The lower the modulation ratio, the lower the maximum output voltage; The higher the modulation ratio, the more obvious the current distortion during over modulation.
...	...	@@ -437,8 +437,8 @@
437	437
438	438	== **F1 group start stop control** ==
439	439
440		-|(% rowspan="2" %)F1.00|Start-up operation mode|Factory default|00
441		-|Setting range|(% colspan="2" %)(((
	439	+|(% rowspan="2" style="text-align:center" %)F1.00|(% style="text-align:center" %)Start-up operation mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)00
	440	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
442	442	LED ones place: Boot mode
443	443
444	444	0: Start directly from the start frequency
...	...	@@ -458,9 +458,8 @@
458	458
459	459	Pre-excitation current, time and DC braking current, time share function code. If F1.09 pre-start braking time is set to 0, start from the start frequency. When the value is not set to 0, pre-excitation is implemented before startup to improve the dynamic response speed.
460	460
461		-
462		-|(% rowspan="2" %)F1.01|Speed tracking mode|Factory default|0
463		-|Setting range|(% colspan="2" %)(((
	460	+|(% rowspan="2" style="text-align:center" %)F1.01|(% style="text-align:center" %)Speed tracking mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	461	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
464	464	LED tens place: speed tracking direction
465	465
466	466	0: One to the stop direction
...	...	@@ -470,72 +470,52 @@
470	470	2: Automatic search
471	471	)))
472	472
473		-
474		-
475	475	Ten: speed tracking direction
476	476
477	477	This parameter determines the direction from which to start speed tracking. Please set it correctly according to the actual situation. If the setting is wrong, the startup may fail. In the case of not knowing the starting direction, you can set to automatic search, the program will automatically judge the starting direction, but the search time will be lengthened accordingly.
478	478
	475	+|(% rowspan="2" style="text-align:center" %)F1.02|(% style="text-align:center" %)Speed tracking time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.00s
	476	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01 to 60.00s
479	479
480		-|(% rowspan="2" %)F1.02|Speed tracking time|Factory default|1.00s
481		-|Setting range|(% colspan="2" %)0.01 to 60.00s
482		-
483		-
484		-
485	485	If the speed tracking time is too short, the tracking may end without tracking the actual frequency. At F1.01=002X, if the search direction is wrong, two searches will be performed and the actual search time will be doubled.
486	486
	480	+|(% rowspan="2" style="text-align:center" %)F1.03|(% style="text-align:center" %)Speed tracking current loop gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00
	481	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00
	482	+|(% rowspan="2" style="text-align:center" %)F1.04|(% style="text-align:center" %)(((
	483	+RPM tracking speed gain
	484	+)))|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00
	485	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01 to 10.00
487	487
488		-|(% rowspan="2" %)F1.03|Speed tracking current loop gain|Factory default|10.00
489		-|Setting range|(% colspan="2" %)0.00 to 10.00
490		-|(% rowspan="2" %)F1.04|(((
491		-RPM tracking
492		-
493		-speed gain
494		-)))|Factory default|2.00
495		-|Setting range|(% colspan="2" %)0.01 to 10.00
496		-
497		-
498		-
499	499	The excitation search current loop gain and velocity loop gain are determined.
500	500
	489	+|(% rowspan="2" style="text-align:center" %)F1.05|(% style="text-align:center" %)Speed tracking current|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)150%
	490	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)50% to 200%
501	501
502		-|(% rowspan="2" %)F1.05|Speed tracking current|Factory default|150%
503		-|Setting range|(% colspan="2" %)50% to 200%
504		-
505		-
506		-
507	507	Set the excitation search current size.
508	508
509		-|(% rowspan="2" %)F1.06|Starting frequency|Factory default|0.00Hz
510		-|Setting range|(% colspan="2" %)0.0s to 60.00Hz
511		-|(% rowspan="2" %)F1.07|Startup frequency duration|Factory default|0.0s
512		-|Setting range|(% colspan="2" %)0.0 to 50.0s
	494	+|(% rowspan="2" style="text-align:center" %)F1.06|(% style="text-align:center" %)Starting frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
	495	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 60.00Hz
	496	+|(% rowspan="2" style="text-align:center" %)F1.07|(% style="text-align:center" %)Startup frequency duration|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
	497	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 50.0s
513	513
	499	+In order to ensure the torque during startup, please use the appropriate startup frequency. In addition, the magnetic flux is established when waiting for the motor to start, so that the starting frequency is maintained for a certain time before accelerating. The starting frequency is maintained for a certain time before accelerating. The startup frequency F1.06 is not limited by the lower frequency. If the frequency given less than startup frequency, the AC driver can no be started, and it will standby state. The startup frequency holding time is not work during forward/reverse switching. The holding time is not included in the acceleration time, but is included in the running time of the simple PLC.
514	514
	501	+|(% rowspan="2" style="text-align:center" %)F1.08|(% style="text-align:center" %)Braking current before starting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80.0%
	502	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 150.0%
	503	+|(% rowspan="2" style="text-align:center" %)F1.09|(% style="text-align:center" %)Braking time before starting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
	504	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 60.0s
515	515
516		-In order to ensure the torque during startup, please use the appropriate startup frequency.In addition, the magnetic flux is established when waiting for the motor to start, so that the starting frequency is maintained for a certain time before accelerating.The starting frequency is maintained for a certain time before accelerating. The startup frequency F1.06 is not limited by the lower frequency. If the frequency given less than startup frequency, the AC driver can no be started, and it will standby state.The startup frequency holding time is not work during forward/reverse switching. The holding time is not included in the acceleration time, but is included in the running time of the simple PLC.
517		-
518		-|(% rowspan="2" %)F1.08|Braking current before starting|Factory default|80.0%
519		-|Setting range|(% colspan="2" %)0.0 to 150.0%
520		-|(% rowspan="2" %)F1.09|Braking time before starting|Factory default|0.0s
521		-|Setting range|(% colspan="2" %)0.0 to 60.0s
522		-
523		-
524		-
525	525	Starting DC braking is generally used to stop the motor completely before starting.
526	526
527	527	If the starting mode is starting after the DC braking, the AC driver will execute the DC braking as the setting value, and it will start running after the setting starting braking time value. It will direct start without DC braking if the setting DC braking time is 0. The braking power is greater with the greater DC braking current.
528	528
529		-
530		-|(% rowspan="2" %)F1.10|Shutdown mode|Factory default|0
531		-|Setting range|(% colspan="2" %)(((
	510	+|(% rowspan="2" style="text-align:center" %)F1.10|(% style="text-align:center" %)Shutdown mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	511	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
532	532	0: Slow down stop
533	533
534	534	1: Free stop
535	535	)))
536	536
537		-
538		-
539	539	0: Slow down stop
540	540
541	541	After the stop command is effective, the inverter reduces the output frequency according to the deceleration mode and the defined acceleration and deceleration time, and stops after the frequency drops to 0.
...	...	@@ -544,41 +544,40 @@
544	544
545	545	When the stop command is valid, the inverter terminates output immediately. The load stops freely according to mechanical inertia.
546	546
547		-|(% rowspan="2" %)F1.11|Stop DC braking start frequency|Factory default|0.00Hz
548		-|Setting range|(% colspan="2" %)0.00Hz to Maximum frequency F0.10
549		-|(% rowspan="2" %)F1.12|Stop DC braking wait time|Factory default|0.0s
550		-|Setting range|(% colspan="2" %)0.0s to 100.0s
551		-|(% rowspan="2" %)F1.13|Stop DC braking current|Factory default|80.0%
552		-|Setting range|(% colspan="2" %)0%-150%
553		-|(% rowspan="2" %)F1.14|Stop DC braking duration|Factory default|0.0s
554		-|Setting range|(% colspan="2" %)0.0s to 100.0s
	525	+|(% rowspan="2" style="text-align:center" %)F1.11|(% style="text-align:center" %)Stop DC braking start frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
	526	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to Maximum frequency F0.10
	527	+|(% rowspan="2" style="text-align:center" %)F1.12|(% style="text-align:center" %)Stop DC braking wait time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
	528	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 100.0s
	529	+|(% rowspan="2" style="text-align:center" %)F1.13|(% style="text-align:center" %)Stop DC braking current|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80.0%
	530	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0% to 150%
	531	+|(% rowspan="2" style="text-align:center" %)F1.14|(% style="text-align:center" %)Stop DC braking duration|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
	532	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 100.0s
555	555
556		-
557		-
558	558	DC braking start frequency: slow down the stopping process. When the output frequency is less than this frequency, the DC braking process starts to stop.
559	559
560		-Dc braking waiting time: When the output frequency is reduced to F1.11 DC braking starting frequency, the inverter stops output and starts timing. After the delay time set by F1.12, DC braking starts again. Used to prevent over current failure caused by DC braking at high speeds.
	536	+DC braking waiting time: When the output frequency is reduced to F1.11 DC braking starting frequency, the inverter stops output and starts timing. After the delay time set by F1.12, DC braking starts again. Used to prevent over current failure caused by DC braking at high speeds.
561	561
562	562	Stop DC braking current: refers to the amount of DC braking applied. The greater the value, the stronger the DC braking effect.
563	563
564		-Dc braking time: the time added to the DC braking amount. When this value is 0, it means that there is no DC braking process, and the inverter stops according to the set deceleration stop process.
	540	+DC braking time: the time added to the DC braking amount. When this value is 0, it means that there is no DC braking process, and the inverter stops according to the set deceleration stop process.
565	565
566		-[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml13344\wps11.jpg]]
	542	+(% style="text-align:center" %)
	543	+(((
	544	+(% style="display:inline-block" %)
	545	+[[Figure 9-1-1 Shutdown DC braking diagram>>image:1763024398600-482.png]]
	546	+)))
567	567
568		-Figure 9-1-1 Shutdown DC braking diagram
	548	+|(% rowspan="2" style="text-align:center" %)F1.16|(% style="text-align:center" %)Energy consumption brake action voltage|(% style="text-align:center" %)Factory default|Model-based setting
	549	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)115.0% to 140.0%
569	569
570		-
571		-|(% rowspan="2" %)F1.16|Energy consumption brake action voltage|Factory default|Model-based setting
572		-|Setting range|(% colspan="2" %)115.0% to 140.0%
573		-
574	574	Set the brake resistance operating voltage. When the relative value of the bus voltage is higher than this value, the brake resistance starts braking.
575	575
576		-|(% rowspan="2" %)F1.17|Magnetic flux braking gain|Factory default|80%
577		-|Setting range|(% colspan="2" %)10% to 500%
578		-|(% rowspan="2" %)F1.18|Magnetic flux braking operating voltage|Factory default|Model-based setting
579		-|Setting range|(% colspan="2" %)110% to 150%
580		-|(% rowspan="2" %)F1.19|Flux brake limiting|Factory default|20%
581		-|Setting range|(% colspan="2" %)0 to 200%
	553	+|(% rowspan="2" style="text-align:center" %)F1.17|(% style="text-align:center" %)Magnetic flux braking gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80%
	554	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)10% to 500%
	555	+|(% rowspan="2" style="text-align:center" %)F1.18|(% style="text-align:center" %)Magnetic flux braking operating voltage|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model-based setting
	556	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)110% to 150%
	557	+|(% rowspan="2" style="text-align:center" %)F1.19|(% style="text-align:center" %)Flux brake limiting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20%
	558	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 200%
582	582
583	583	When the motor decelerates the feedback energy, opening the flux brake can consume the feedback energy on the motor, so as to achieve rapid deceleration of the motor. This function is only effective in asynchronous motor VF control, and turning on this function will correspondingly increase motor loss and motor temperature rise.
584	584
...	...	@@ -588,43 +588,36 @@
588	588
589	589	Flux brake limiting: The upper limit of the flux brake voltage, which may cause the output current of the inverter to be too high.
590	590
591		-|(% rowspan="2" %)F1.20|Acceleration and deceleration selection|Factory default|0
592		-|Setting range|(% colspan="2" %)(((
	568	+|(% rowspan="2" style="text-align:center" %)F1.20|Acceleration and deceleration selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	569	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
593	593	0: Straight line
594	594
595	595	1: S curve
596	596	)))
597	597
598		-
599		-
600	600	0: Straight line, generally suitable for general purpose load.
601	601
602	602	1: S-curve, S-type acceleration and deceleration curve is mainly provided for the load that needs to slow down noise and vibration during acceleration and deceleration, reduce start-stop impact, or decrease torque at low frequency, and short-time acceleration at high frequency. If an over current or over load failure occurs at startup, reduce the set value of [F1.21].
603	603
	579	+|(% rowspan="2" style="text-align:center" %)F1.21|(% style="text-align:center" %)S-curve initial acceleration rate|(% style="text-align:center" %)Factory default|50.0%
	580	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0% to 100.0%
	581	+|(% rowspan="2" style="text-align:center" %)F1.22|(% style="text-align:center" %)S-curve initial deceleration rate|(% style="text-align:center" %)Factory default|50.0%
	582	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0% to 100.0%
604	604
605		-|(% rowspan="2" %)F1.21|S-curve initial acceleration rate|Factory default|50.0%
606		-|Setting range|(% colspan="2" %)20.0%-100.0%
607		-|(% rowspan="2" %)F1.22|S-curve initial deceleration rate|Factory default|50.0%
608		-|Setting range|(% colspan="2" %)20.0%-100.0%
609		-
610	610	S-curve Initial acceleration rate: The rate at which the acceleration process begins to increase in frequency. The smaller the initial acceleration rate, the more curved the S-curve of the acceleration process, whereas the larger the initial acceleration rate, the closer the acceleration S-curve to a straight line. To make the acceleration curve softer, you can reduce the initial acceleration rate and extend the acceleration time.
611	611
612		-|(% rowspan="2" %)F1.23|Zero speed holding torque|Factory default|0
613		-|Setting range|(% colspan="2" %)0.0% to 150.0%
	586	+|(% rowspan="2" style="text-align:center" %)F1.23|(% style="text-align:center" %)Zero speed holding torque|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	587	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 150.0%
614	614
615		-
616		-
617	617	Set the output torque of the inverter at zero speed. If the torque setting is large or the duration is long, attention should be paid to the heat dissipation of the motor.
618	618
619		-|(% rowspan="2" %)F1.24|Zero speed holding torque time|Factory default|Model setting
620		-|Setting range|(% colspan="2" %)(((
	591	+|(% rowspan="2" style="text-align:center" %)F1.24|(% style="text-align:center" %)Zero speed holding torque time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model setting
	592	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
621	621	0.0 to 6000.0s
622	622
623	623	If the value is set to 6000.0s, the value remains unchanged without time limitation
624	624	)))
625	625
626		-
627		-
628	628	Set the torque holding time when the inverter is running at zero speed. The timing starts when the operating frequency is 0Hz, and the inverter stops output after the time reaches the set zero-speed holding torque time. Among them, the effective timing value is 0 to 5999.9s, and the parameters are set in the effective timing value of the VFD at the set time. After the time is full, the VFD terminates and maintains the zero-speed torque.
629	629
630	630	If the parameter setting is equal to 6000.0s, the VFD is not timed and defaults to long-term validity, and the zero-speed torque holding is terminated only after the stop command is given or the non-zero operating frequency is given.
...	...	@@ -631,18 +631,18 @@
631	631
632	632	Setting an appropriate zero-speed holding torque time can effectively achieve energy saving and protect the motor.
633	633
634		-|(% rowspan="2" %)F1.25|Start pre-excitation time|Factory default|0.20
635		-|Setting range|(% colspan="2" %)0.00 to 60.00s
	604	+|(% rowspan="2" style="text-align:center" %)F1.25|(% style="text-align:center" %)Start pre-excitation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
	605	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 60.00s
636	636
637	637	This parameter is only valid if F0.00=0, in the open loop vector start, appropriate pre-excitation can make the start smoother.
638	638
639		-|(% rowspan="2" %)F1.26|Shutdown frequency|Factory default|0.00Hz
640		-|Setting range|(% colspan="2" %)0.00-60.00Hz
	609	+|(% rowspan="2" style="text-align:center" %)F1.26|(% style="text-align:center" %)Shutdown frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
	610	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 60.00Hz
641	641
642	642	This function is defined as the frequency of the minimum output of the inverter, less than this frequency, the output of the inverter stops.
643	643
644		-|(% rowspan="2" %)F1.27|Power failure restart action selection|Factory default|0
645		-|Setting range|(% colspan="2" %)(((
	614	+|(% rowspan="2" style="text-align:center" %)F1.27|(% style="text-align:center" %)Power failure restart action selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	615	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
646	646	0: Invalid
647	647
648	648	1: Valid
...	...	@@ -652,14 +652,13 @@
652	652
653	653	1: Valid If the inverter is in operation before the power is cut off, the inverter will automatically start after the power is restored and after the set waiting time (set by [F1.28]). During the waiting time of power failure and restart, the inverter does not accept the running command, but if the stop command is entered during this period, the inverter will release the restart state.
654	654
655		-|(% rowspan="2" %)F1.28|Power failure restart waiting time|Factory default|0.50s
656		-|Setting range|(% colspan="2" %)0.00 to 120.00s
	625	+|(% rowspan="2" style="text-align:center" %)F1.28|(% style="text-align:center" %)Power failure restart waiting time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.50s
	626	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 120.00s
657	657
658	658	When [F1.27] setting is effective, After the inverter power supply, it will wait for the time set in [F1.28] to start running.
659	659
660		-
661		-|(% rowspan="2" %)F1.29|Select the terminal running protection|Factory default|11
662		-|Setting range|(% colspan="2" %)(((
	630	+|(% rowspan="2" style="text-align:center" %)F1.29|(% style="text-align:center" %)Select the terminal running protection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)11
	631	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
663	663	LED units digital: Select the terminal run instruction when powering on.
664	664
665	665	0: The terminal running instruction is invalid during power-on.
...	...	@@ -675,7 +675,6 @@
675	675
676	676	When terminal operation is selected, the initial wiring state of peripheral devices may affect the safety of the device. This parameter provides protective measures for terminal operation.
677	677
678		-
679	679	LED units place: Select the terminal run command when powering on
680	680
681	681	Select the mode of executing the operation instruction when the inverter is powered on with the terminal running signal in effect.
...	...	@@ -692,11 +692,10 @@
692	692
693	693	1: When the terminal instruction is effective, the terminal control can be started directly.
694	694
	663	+== **F2 group motor parameters** ==
695	695
696		-**F2 group motor parameters**
697		-
698		-|(% rowspan="2" %)F2.00|Motor type|Factory default|0
699		-|Setting range|(% colspan="2" %)(((
	665	+|(% rowspan="2" style="text-align:center" %)F2.00|(% style="text-align:center" %)Motor type|(% style="text-align:center" %)Factory default|0
	666	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
700	700	0: Asynchronous motor (AM)
701	701
702	702	1: Permanent magnet synchronous motor (PM)
...	...	@@ -706,41 +706,41 @@
706	706
707	707	2 Single-phase asynchronous motor refers to a single-phase motor without phase shift capacitance, U terminal is connected to the main winding, V terminal is connected to the common end, and W terminal is connected to the auxiliary winding.
708	708
709		-| |(% rowspan="2" %)F2.01|(% colspan="2" %)Rated power of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
710		-| |(% colspan="2" %)Setting range|(% colspan="4" %)0.1kW to 400.0kW|
711		-| |(% rowspan="2" %)F2.02|(% colspan="2" %)Rated voltage of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
712		-| |(% colspan="2" %)Setting range|(% colspan="4" %)1V to 440V|
713		-| |(% rowspan="2" %)F2.03|(% colspan="2" %)Rated current of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
714		-| |(% colspan="2" %)Setting range|(% colspan="4" %)0.1A to 2000.0A|
715		-| |(% rowspan="2" %)F2.04|(% colspan="2" %)Rated power of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
716		-| |(% colspan="2" %)Setting range|(% colspan="4" %)0.00Hz-Maximum frequency F0.10|
717		-| |(% rowspan="2" %)F2.05|(% colspan="2" %)Rated motor speed|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
718		-| |(% colspan="2" %)Setting range|(% colspan="4" %)1rpm to 65000rpm|
719		-|(% colspan="8" %)**Note:**|
720		-|(% colspan="8" %)(((
	676	+(% style="width:875px" %)
	677	+|(% colspan="2" rowspan="2" style="text-align:center" %)F2.01|(% colspan="2" style="text-align:center" %)Rated power of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
	678	+|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.1kW to 400.0kW
	679	+|(% colspan="2" rowspan="2" style="text-align:center" %)F2.02|(% colspan="2" style="text-align:center" %)Rated voltage of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
	680	+|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)1V to 440V
	681	+|(% colspan="2" rowspan="2" style="text-align:center" %)F2.03|(% colspan="2" style="text-align:center" %)Rated current of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
	682	+|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.1A to 2000.0A
	683	+|(% colspan="2" rowspan="2" style="text-align:center" %)F2.04|(% colspan="2" style="text-align:center" %)Rated power of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
	684	+|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.00Hz to Maximum frequency F0.10
	685	+|(% colspan="2" rowspan="2" style="text-align:center" %)F2.05|(% colspan="2" style="text-align:center" %)Rated motor speed|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
	686	+|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)1rpm to 65000rpm
	687	+|(% colspan="8" %)**✎Note:**(((
721	721	1. Please set according to the nameplate parameters of the motor.
722	722
723	723	2. The excellent control performance of vector control requires accurate motor parameters, and accurate parameter identification comes from the correct setting of the rated parameters of the motor.
724	724
725	725	3. In order to ensure the control performance, please configure the motor according to the inverter standard adaptation motor, if the motor power and the standard adaptation motor gap is too large, the control performance of the inverter will be significantly reduced.
726		-)))|
727		-|(% colspan="3" rowspan="2" %)F2.06|(% colspan="2" %)Motor stator resistance|(% colspan="2" %)Factory default|Model determination|
728		-|(% colspan="2" %)Setting range|(% colspan="3" %)0.001Ω to 65.000Ω|
729		-|(% colspan="3" rowspan="2" %)F2.07|(% colspan="2" %)Motor rotor resistance|(% colspan="2" %)Factory default|Model determination|
730		-|(% colspan="2" %)Setting range|(% colspan="3" %)0.001Ω to 65.000Ω|
731		-|(% colspan="3" rowspan="2" %)F2.08|(% colspan="2" %)Motor fixed rotor inductance|(% colspan="2" %)Factory default|Model determination|
732		-|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 6500.0mH
733		-|(% colspan="3" rowspan="2" %)F2.09|(% colspan="2" %)Mutual inductance of motor fixed rotor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination
734		-|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 6500.0mH
735		-|(% colspan="3" rowspan="2" %)F2.10|(% colspan="2" %)Motor no-load current|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination
736		-|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 650.0A
	693	+)))
	694	+|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.06|(% colspan="2" style="text-align:center; width:493px" %)Motor stator resistance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
	695	+|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.001Ω to 65.000Ω
	696	+|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.07|(% colspan="2" style="text-align:center; width:493px" %)Motor rotor resistance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
	697	+|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.001Ω to 65.000Ω
	698	+|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.08|(% colspan="2" style="text-align:center; width:493px" %)Motor fixed rotor inductance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
	699	+|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 6500.0mH
	700	+|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.09|(% colspan="2" style="text-align:center; width:493px" %)Mutual inductance of motor fixed rotor|(% colspan="2" style="text-align:center" %)Factory default|Model determination
	701	+|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 6500.0mH
	702	+|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.10|(% colspan="2" style="text-align:center; width:493px" %)Motor no-load current|(% colspan="2" style="text-align:center" %)Factory default|Model determination
	703	+|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 650.0A
737	737
738	738	After the automatic tuning of the asynchronous motor is completed normally, the set values of the asynchronous motor parameters (F2.06 to F2.10) are automatically updated.
739	739
740	740	After changing the motor rated power F2.01 each time, the VFD F2.06 to F2.10 parameter values will automatically restore the default standard motor parameters, if running in vector mode, please re-tune.
741	741
742		-|(% rowspan="2" %)F2.11|Tuning selection|Factory default|0
743		-|Setting range|(% colspan="2" %)(((
	709	+|(% rowspan="2" style="text-align:center; width:135px" %)F2.11|(% style="text-align:center; width:266px" %)Tuning selection|(% style="text-align:center; width:202px" %)Factory default|(% style="text-align:center" %)0
	710	+|(% style="text-align:center; width:266px" %)Setting range|(% colspan="2" style="width:231px" %)(((
744	744	0: No operation is performed
745	745
746	746	1: Static tuning 1
...	...	@@ -750,8 +750,6 @@
750	750	3: Static tuning 2 (AM calculated Lm)
751	751	)))
752	752
753		-
754		-
755	755	Tip: Before tuning, you must set the correct motor type and rating parameters (F2.00 to F2.05).
756	756
757	757	0: No operation is performed, that is, tuning is disabled.
...	...	@@ -770,15 +770,13 @@
770	770
771	771	Note: Tuning can only be effective in keyboard control mode, acceleration and deceleration time is recommended to use the factory default.
772	772
773		-|(% rowspan="2" %)F2.12|G/P Machine type|Factory default|Model determination
774		-|Setting range|(% colspan="2" %)(((
775		-0: G type machine;
	738	+|(% rowspan="2" style="text-align:center" %)F2.12|(% style="text-align:center" %)G/P Machine type|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	739	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	740	+0: G-type machine;
776	776
777	777	1: P-type machine
778	778	)))
779	779
780		-
781		-
782	782	This parameter can only be used to view factory models.
783	783
784	784	1: Constant torque load for specified rated parameters.
...	...	@@ -785,73 +785,385 @@
785	785
786	786	2: Suitable for the specified rated parameters of the variable torque load (fan, pump load).
787	787
788		-|(% rowspan="2" %)F2.13|Single phase asynchronous motor turns ratio|Factory default|100%
789		-|Setting range|(% colspan="2" %)10 to 200%
	751	+|(% rowspan="2" style="text-align:center" %)F2.13|(% style="text-align:center" %)Single phase asynchronous motor turns ratio|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100%
	752	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)10 to 200%
790	790
791		-
792		-
793	793	U terminal main winding, V terminal auxiliary winding, W common end, this parameter is used to set the ratio of the number of turns between the main winding and the auxiliary winding of the single-phase motor.
794	794
795		-|(% rowspan="2" %)F2.14|Current calibration coefficient of single-phase motor|Factory default|120%
796		-|Setting range|(% colspan="2" %)50 to 200%
	756	+|(% rowspan="2" style="text-align:center" %)F2.14|(% style="text-align:center" %)Current calibration coefficient of single-phase motor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)120%
	757	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)50 to 200%
797	797
798	798	The single-phase motor has main and auxiliary windings, and the three-phase output current is unbalanced, so the output current displayed by the inverter needs to be multiplied by the coefficient of the resultant current.
799	799
	761	+|(% rowspan="2" style="text-align:center" %)F2.15|(% style="text-align:center; width:310px" %)Number of motor poles|(% style="text-align:center; width:167px" %)Factory default|(% style="text-align:center" %)4
	762	+|(% style="text-align:center; width:310px" %)Setting range|(% colspan="2" style="text-align:center; width:215px" %)2 to 48
800	800
801		-|(% rowspan="2" %)F2.15|Number of motor poles|Factory default|4
802		-|Setting range|(% colspan="2" %)2 to 48
803		-
804		-
805		-
806	806	Change F2.04 or F2.05, the program will automatically calculate the number of motor poles, in general, do not need to set this parameter.
807	807
808		-|(% rowspan="2" %)F2.22|Stator resistance of synchro|Factory default|Model determination
809		-|Setting range|(% colspan="2" %)0.001 to 65.000(0.001Ohm)
810		-|(% rowspan="2" %)F2.23|Synchro d-axis inductance|Factory default|Model determination
811		-|Setting range|(% colspan="2" %)0.01mH-655.35mH
812		-|(% rowspan="2" %)F2.24|Synchro Q-axis inductance|Factory default|Model determination
813		-|Setting range|(% colspan="2" %)0.01mH to 655.35mH
814		-|(% rowspan="2" %)F2.25|Synchro back electromotive force|Factory default|Model determination
815		-|Setting range|(% colspan="2" %)0.1V to 1000.0V
	766	+|(% rowspan="2" style="text-align:center; width:92px" %)F2.22|(% style="text-align:center; width:242px" %)Stator resistance of synchro|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	767	+|(% style="text-align:center; width:242px" %)Setting range|(% colspan="2" style="text-align:center" %)0.001 to 65.000(0.001Ohm)
	768	+|(% rowspan="2" style="text-align:center; width:92px" %)F2.23|(% style="text-align:center; width:242px" %)Synchro d-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	769	+|(% style="text-align:center; width:242px" %)Setting range|(% colspan="2" style="text-align:center" %)0.01mH to 655.35mH
	770	+|(% rowspan="2" style="text-align:center; width:92px" %)F2.24|(% style="text-align:center; width:242px" %)Synchro Q-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	771	+|(% style="text-align:center; width:242px" %)Setting range|(% colspan="2" style="text-align:center" %)0.01mH to 655.35mH
	772	+|(% rowspan="2" style="text-align:center; width:92px" %)F2.25|(% style="text-align:center; width:242px" %)Synchro back electromotive force|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	773	+|(% style="text-align:center; width:242px" %)Setting range|(% colspan="2" style="text-align:center" %)0.1V to 1000.0V
816	816
817	817	After the automatic tuning of the synchronous motor is completed, the set values of the synchronous motor parameters (F2.22 to F2.25) are automatically updated.
818	818
819	819	After changing the rated motor power F2.01 each time, the F2.22 to F2.25 parameter values of the inverter will automatically restore the default standard motor parameters, please re-tune.
820	820
821		-|(% rowspan="2" %)F2.28|High frequency injection voltage|Factory default|20.0%
822		-|Setting range|(% colspan="2" %)0.1% to 100.0%
	779	+|(% rowspan="2" style="text-align:center" %)F2.28|(% style="text-align:center" %)High frequency injection voltage|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
	780	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1% to 100.0%
823	823
	782	+The current injected when the synchronous motor learns the inductance of DQ axis by high frequency injection.
824	824
	784	+|(% rowspan="2" style="text-align:center" %)F2.29|(% style="text-align:center" %)Back potential identification current|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.0%
	785	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1% to 100.0%
825	825
826		-The current injected when the synchronous motor learns the inductance of DQ axis by high frequency injection.
	787	+The output current of the inverter is the size when the synchronous motor dynamically adjusts to learn the back potential.
827	827
828		-|(% rowspan="2" %)F2.29|Back potential identification current|Factory default|50.0%
829		-|Setting range|(% colspan="2" %)0.1% to 100.0%
	789	+|(% rowspan="2" style="text-align:center" %)F2.31|(% style="text-align:center" %)Asynchronous no-load current per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	790	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1%
	791	+|(% rowspan="2" style="text-align:center" %)F2.32|(% style="text-align:center" %)Per unit asynchronous stator resistance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	792	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	793	+|(% rowspan="2" style="text-align:center" %)F2.33|(% style="text-align:center" %)Asynchronous rotor resistance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	794	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	795	+|(% rowspan="2" style="text-align:center" %)F2.34|(% style="text-align:center" %)Asynchronous mutual inductance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	796	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1%
	797	+|(% rowspan="2" style="text-align:center" %)F2.35|(% style="text-align:center" %)Asynchronous leakage sensing per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	798	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	799	+|(% rowspan="2" style="text-align:center" %)F2.36|(% style="text-align:center" %)Per unit value of asynchronous leakage sensing coefficient|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	800	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	801	+|(% rowspan="2" style="text-align:center" %)F2.37|(% style="text-align:center" %)Synchronous stator resistance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	802	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	803	+|(% rowspan="2" style="text-align:center" %)F2.38|(% style="text-align:center" %)Per unit value of synchronous D-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	804	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	805	+|(% rowspan="2" style="text-align:center" %)F2.39|(% style="text-align:center" %)Synchronous Q-axis inductance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	806	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
	807	+|(% rowspan="2" style="text-align:center" %)F2.40|(% style="text-align:center" %)Back electromotive force of synchronous motor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
	808	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1V
830	830
	810	+The per unit value of the motor parameters is used for the actual program calculation. After learning or parameter recovery, the actual change is F2.31 to F2.40. F2.06 to F2.10 and F2.22 to F2.25 are calculated from the per unit value, so only F2.31 to F2.40 values can be modified, F2.06 to F2.10 and F2.22 to F2.25 are only used to display and cannot be changed.
831	831
	812	+== **F3 vector control parameters** ==
832	832
833		-The output current of the inverter is the size when the synchronous motor dynamically adjusts to learn the back potential.
	814	+The F3 group function code is only valid in vector control mode, that is, it is valid when F0.00 = 0 and invalid when F0.00 = 1.
834	834
	816	+|(% rowspan="2" style="text-align:center" %)F3.00|(% style="text-align:center" %)ASR (Speed loop) proportional gain 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
	817	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 1.00
	818	+|(% rowspan="2" style="text-align:center" %)F3.01|(% style="text-align:center" %)ASR(Velocity ring) integration time 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
	819	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01 to 10.00s
	820	+|(% rowspan="2" style="text-align:center" %)F3.03|(% style="text-align:center" %)ASR filtering time 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.000s
	821	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.000 to 0.100s
	822	+|(% rowspan="2" style="text-align:center" %)F3.04|(% style="text-align:center" %)ASR switching frequency 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)5.00Hz
	823	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00Hz
	824	+|(% rowspan="2" style="text-align:center" %)F3.05|(% style="text-align:center" %)ASR(Speed loop) proportional gain 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
	825	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 1.00
	826	+|(% rowspan="2" style="text-align:center" %)F3.06|(% rowspan="2" style="text-align:center" %)ASR(Velocity loop) integration time 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
	827	+|(% colspan="2" style="text-align:center" %)0.01 to 10.00s
	828	+|(% rowspan="2" style="text-align:center" %)F3.08|(% style="text-align:center" %)ASR filtering time 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.000s
	829	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.000 to 0.100s
	830	+|(% rowspan="2" style="text-align:center" %)F3.09|(% style="text-align:center" %)ASR switching frequency 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00Hz
	831	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00Hz
835	835
836		-|(% rowspan="2" %)F2.31|Asynchronous no-load current per unit value|Factory default|Model determination
837		-|Setting range|(% colspan="2" %)0.1%
838		-|(% rowspan="2" %)F2.32|Per unit asynchronous stator resistance|Factory default|Model determination
839		-|Setting range|(% colspan="2" %)0.01%
840		-|(% rowspan="2" %)F2.33|Asynchronous rotor resistance per unit value|Factory default|Model determination
841		-|Setting range|(% colspan="2" %)0.01%
842		-|(% rowspan="2" %)F2.34|Asynchronous mutual inductance per unit value|Factory default|Model determination
843		-|Setting range|(% colspan="2" %)0.1%
844		-|(% rowspan="2" %)F2.35|Asynchronous leakage sensing per unit value|Factory default|Model determination
845		-|Setting range|(% colspan="2" %)0.01%
846		-|(% rowspan="2" %)F2.36|Per unit value of asynchronous leakage sensing coefficient|Factory default|Model determination
847		-|Setting range|(% colspan="2" %)0.01%
848		-|(% rowspan="2" %)F2.37|Synchronous stator resistance per unit value|Factory default|Model determination
849		-|Setting range|(% colspan="2" %)0.01%
850		-|(% rowspan="2" %)F2.38|Per unit value of synchronous D-axis inductance|Factory default|Model determination
851		-|Setting range|(% colspan="2" %)0.01%
852		-|(% rowspan="2" %)F2.39|Synchronous Q-axis inductance per unit value|Factory default|Model determination
853		-|Setting range|(% colspan="2" %)0.01%
854		-|(% rowspan="2" %)F2.40|Back electromotive force of synchronous motor|Factory default|Model determination
855		-|Setting range|(% colspan="2" %)0.1V
	833	+F3.00 and F3.01 are PI adjustment parameters when the operating frequency is less than switching frequency 1 (F3.04).
856	856
857		-The per unit value of the motor parameters is used for the actual program calculation. After learning or parameter recovery, the actual change is F2.31-F2.40. F2.06-F2.10 and F2.22-F2.25 are calculated from the per unit value, so only F2.31-F2.40 values can be modified, F2.06-F2.10 and F2.22-F2.25 are only used to display and cannot be changed.
	835	+F3.05 and F3.06 are PI adjustment parameters whose operating frequency is greater than switching frequency 2 (F3.09).
	836	+
	837	+The PI parameters of the frequency segment between switching frequency 1 and switching frequency 2 are linear switching of the two groups of PI parameters, as shown in the figure below:
	838	+
	839	+(% style="text-align:center" %)
	840	+(((
	841	+(% style="display:inline-block" %)
	842	+[[Figure 9-3-1 PI parameter diagram>>image:1763026906844-539.png]]
	843	+)))
	844	+
	845	+The speed dynamic response characteristic of vector control can be adjusted by setting the proportional coefficient and integration time of the speed regulator. Proportional increase
	846	+
	847	+If the integration time is reduced, the dynamic response of the speed loop can be accelerated. The system may oscillate if the proportional gain is too large or the integration time is too small.
	848	+
	849	+Recommended adjustment method:
	850	+
	851	+If the Factory parameters cannot meet the requirements, fine-tune the Factory default parameters: first increase the proportional gain to ensure that the system does not oscillate; Then the integration time is reduced so that the system has both faster response characteristics and smaller overshoot.
	852	+
	853	+Note: Setting the PI parameter incorrectly may result in excessive speed overshoot. Even overvoltage failure occurs when overshoot falls back.
	854	+
	855	+|(% rowspan="2" style="text-align:center" %)F3.02|(% style="text-align:center" %)Loss of velocity protection value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0ms
	856	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 5000ms
	857	+
	858	+In order to prevent motor speed, when the motor speed is detected to have a large deviation from the target speed and maintain F3.02 time or more, the inverter alarms.
	859	+
	860	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.03|(% style="text-align:center; width:445px" %)ASR Filtering time 1|(% style="text-align:center; width:232px" %)Factory default|(% style="text-align:center; width:89px" %)0.000s
	861	+|(% style="text-align:center; width:445px" %)Setting range|(% colspan="2" style="text-align:center; width:321px" %)0.000 to 0.100s
	862	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.08|(% style="text-align:center; width:445px" %)ASR Filtering time 2|(% style="text-align:center; width:232px" %)Factory default|(% style="text-align:center; width:89px" %)0.000s
	863	+|(% style="text-align:center; width:445px" %)Setting range|(% colspan="2" style="text-align:center; width:321px" %)0.000 to 0.100s
	864	+
	865	+It is used to set the filtering time of the speed loop feedback. When the output frequency is below F3.04, the filtering time is F3.03. When the value is higher than F3.04, the filtering time is F3.08.
	866	+
	867	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.10|(% style="text-align:center; width:446px" %)Slip compensation coefficient|(% style="text-align:center; width:233px" %)Factory default|(% style="text-align:center; width:87px" %)100%
	868	+|(% style="text-align:center; width:446px" %)Setting range|(% colspan="2" style="text-align:center; width:320px" %)0 to 250%
	869	+
	870	+This parameter is used to adjust the slip frequency compensation for high performance vector control. When fast response and high speed accuracy are required, proper adjustment of this parameter can improve the dynamic response speed of the system and eliminate the steady-state speed error.
	871	+
	872	+|(% rowspan="2" style="text-align:center" %)F3.11|(% style="text-align:center; width:449px" %)Maximum electric torque|(% style="text-align:center; width:235px" %)Factory default|(% style="text-align:center; width:83px" %)160.0%
	873	+|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:318px" %)0.0 to 250.0%
	874	+|(% rowspan="2" style="text-align:center" %)F3.12|(% style="text-align:center; width:449px" %)Maximum generating torque|(% style="text-align:center; width:235px" %)Factory default|(% style="text-align:center; width:83px" %)160.0%
	875	+|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:318px" %)0.0 to 250.0%
	876	+
	877	+When speed control is set, the maximum electric torque in the electric state and the maximum electric torque in the generation state are respectively.
	878	+
	879	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.16|(% style="text-align:center; width:452px" %)Current loop D axis proportional gain|(% style="text-align:center; width:237px" %)Factory default|(% style="text-align:center; width:77px" %)1.0
	880	+|(% style="text-align:center; width:452px" %)Setting range|(% colspan="2" style="text-align:center; width:314px" %)0.1 to 10.0
	881	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.17|(% style="text-align:center; width:452px" %)Current loop D axis integral gain|(% style="text-align:center; width:237px" %)Factory default|(% style="text-align:center; width:77px" %)1.0
	882	+|(% style="text-align:center; width:452px" %)Setting range|(% colspan="2" style="text-align:center; width:314px" %)0.1 to 10.0
	883	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.18|(% style="text-align:center; width:452px" %)Current loop Q axis proportional gain|(% style="text-align:center; width:237px" %)Factory default|(% style="text-align:center; width:77px" %)1.0
	884	+|(% style="text-align:center; width:452px" %)Setting range|(% colspan="2" style="text-align:center; width:314px" %)0.1 to 10.0
	885	+|(% rowspan="2" style="text-align:center; width:115px" %)F3.19|(% style="text-align:center; width:452px" %)Current loop Q axis integral gain|(% style="text-align:center; width:237px" %)Factory default|(% style="text-align:center; width:77px" %)1.0
	886	+|(% style="text-align:center; width:452px" %)Setting range|(% colspan="2" style="text-align:center; width:314px" %)0.1 to 10.0
	887	+
	888	+Set PI parameter of current loop in vector control of asynchronous machine and synchronous machine. When the vector control, if the speed, current oscillation, instability phenomenon, can be appropriately reduced each gain to achieve stability; At the same time, increasing each gain helps to improve the dynamic response of the motor.
	889	+
	890	+|(% rowspan="2" style="text-align:center; width:116px" %)F3.20|(% style="text-align:center; width:454px" %)D-axis feed forward gain|(% style="text-align:center; width:236px" %)Factory default|(% style="text-align:center; width:75px" %)50.0%
	891	+|(% style="text-align:center; width:454px" %)Setting range|(% colspan="2" style="text-align:center; width:311px" %)0.0 to 200.0%
	892	+|(% rowspan="2" style="text-align:center; width:116px" %)F3.21|(% style="text-align:center; width:454px" %)Q-axis feed forward gain|(% style="text-align:center; width:236px" %)Factory default|(% style="text-align:center; width:75px" %)50.0%
	893	+|(% style="text-align:center; width:454px" %)Setting range|(% colspan="2" style="text-align:center; width:311px" %)0.0 to 200.0%
	894	+
	895	+The current loop has been decoupled, and the feed forward can accelerate the response speed of the current loop. Increasing feed forward can make the response faster, but it is generally not recommended to exceed 100.0%.
	896	+
	897	+|(% rowspan="2" style="text-align:center; width:113px" %)F3.22|(% style="text-align:center; width:458px" %)Optimize the current loop bandwidth|(% style="text-align:center; width:240px" %)Factory default|(% style="text-align:center; width:70px" %)2.00ms
	898	+|(% style="text-align:center; width:458px" %)Setting range|(% colspan="2" style="text-align:center; width:310px" %)0.0 to 99.99ms
	899	+|(% rowspan="2" style="text-align:center; width:113px" %)F3.23|(% style="text-align:center; width:458px" %)Current loop control word|(% style="text-align:center; width:240px" %)Factory default|(% style="text-align:center; width:70px" %)0
	900	+|(% style="text-align:center; width:458px" %)Setting range|(% colspan="2" style="text-align:center; width:310px" %)0 to 65535
	901	+
	902	+This parameter is used to set the current ring.
	903	+
	904	+|(% rowspan="2" style="text-align:center" %)F3.24|(% style="text-align:center" %)Weak magnetic control current upper limit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50%
	905	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 200%
	906	+|(% rowspan="2" style="text-align:center" %)F3.25|(% style="text-align:center" %)Weak magnetic control feed forward gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
	907	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 500%
	908	+|(% rowspan="2" style="text-align:center" %)F3.26|(% style="text-align:center" %)Weak magnetic control proportional gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)500
	909	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
	910	+|(% rowspan="2" style="text-align:center" %)F3.27|(% style="text-align:center" %)Weak magnetic control integral gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1000
	911	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
	912	+
	913	+When the asynchronous motor and permanent magnet synchronous motor work in vector mode, the weak magnetic acceleration can be carried out. F3.24 sets the upper limit of demagnetization current, and the weak magnetic function is turned off when the time phase is set to 0. F3.25 to F3.27 Set the parameters of magnetic weakening control. When instability occurs during magnetic weakening, adjust the parameters for debugging.
	914	+
	915	+|(% rowspan="2" style="text-align:center" %)F3.28|(% style="text-align:center" %)MTPA gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
	916	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 500.0%
	917	+|(% rowspan="2" style="text-align:center" %)F3.29|(% style="text-align:center" %)MTPA filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100ms
	918	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 999.9ms
	919	+
	920	+MTPA function is to optimize the excitation strategy of permanent magnet synchronous motor to maximize motor output/motor current; When the difference between D and Q axis inductance of permanent magnet motor is large, adjusting [F3.28] can obviously change the motor current under the same load. Adjustment [F3.29] can improve the stability of motor operation.
	921	+
	922	+|(% rowspan="2" style="text-align:center" %)F3.30|(% style="text-align:center" %)Magnetic flux compensation coefficient|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100%
	923	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 500%
	924	+|(% rowspan="2" style="text-align:center" %)F3.31|(% style="text-align:center" %)Open-loop vector observer gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1024
	925	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
	926	+|(% rowspan="2" style="text-align:center" %)F3.32|(% style="text-align:center" %)Open loop vector observation filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20ms
	927	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1 to 100ms
	928	+|(% rowspan="2" style="text-align:center" %)F3.33|(% style="text-align:center" %)The open-loop vector compensates the starting frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.0%
	929	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0%
	930	+|(% rowspan="2" style="text-align:center" %)F3.34|(% style="text-align:center" %)Open loop vector control word|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)4
	931	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
	932	+
	933	+This parameter is used to set the parameter of flux observation when asynchronous motor or synchronous motor is controlled by open loop vector.
	934	+
	935	+|(% rowspan="2" style="text-align:center" %)F3.35|(% style="text-align:center" %)Synchronous open loop start mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
	936	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	937	+0: Direct startup
	938	+
	939	+1: Start at an Angle
	940	+)))
	941	+
	942	+It is used to set the starting mode when the synchronous motor is open loop vector, 0 starts DC first, pulls the permanent magnet to the set position and then starts; 1 Find the permanent magnet position before starting.
	943	+
	944	+|(% rowspan="2" style="text-align:center" %)F3.36|(% style="text-align:center" %)DC pull in time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)500ms
	945	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1ms to 9999ms
	946	+
	947	+Synchronous motor start DC pull in time, time is too short may appear permanent magnet has not completely pulled to the set position on the end of the possibility, may appear not smooth start or even start failure.
	948	+
	949	+|(% rowspan="2" style="text-align:center" %)F3.37|(% style="text-align:center" %)Synchronous open loop vector low frequency boost|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
	950	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0%
	951	+|(% rowspan="2" style="text-align:center" %)F3.38|(% style="text-align:center" %)Synchronous open loop vector high frequency boost|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
	952	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0%
	953	+|(% rowspan="2" style="text-align:center" %)F3.39|(% style="text-align:center" %)Low frequency boost to maintain frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.0%
	954	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0%
	955	+|(% rowspan="2" style="text-align:center" %)F3.40|(% style="text-align:center" %)Low frequency increases cutoff frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
	956	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0%
	957	+
	958	+At low frequency, the D-axis current can be appropriately increased to improve the accuracy of flux observation and starting torque. When the relative frequency (relative to the rated frequency) is lower than F3.39, the D-axis current feed is set to F3.37; When the relative frequency is higher than F3.38, the given current of D-axis is F3.38. When the relative frequency is before F3.38 and F3.39, the D-axis current is given between F3.39 and F3.40. When the synchronous motor is running at high frequency under no-load or light load (relative frequency is higher than F3.40), the D-axis current F3.38 can be set appropriately to reduce the current jitters.
	959	+
	960	+|(% rowspan="2" style="text-align:center" %)F3.46|(% style="text-align:center" %)Speed/torque control mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	961	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	962	+0: Speed control
	963	+
	964	+1: Torque control
	965	+)))
	966	+
	967	+1: Torque control is only effective when the open loop vector is controlled, and VF control is invalid.
	968	+
	969	+
	970	+|(% rowspan="2" style="text-align:center" %)F3.47|(% style="text-align:center" %)Torque given channel selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	971	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	972	+0: F3.48 is set.
	973	+
	974	+1: AI1╳F3.48
	975	+
	976	+2: AI2╳F3.48
	977	+
	978	+3: AI3╳F3.48
	979	+
	980	+4: PUL╳F3.48
	981	+
	982	+5: Keyboard potentiometer ╳F3.48
	983	+
	984	+6: RS485 communication ╳F3.48
	985	+)))
	986	+
	987	+Torque setting adopts relative value, 100.0% corresponds to the rated torque of the motor. The Setting range is 0% to 200.0%, indicating that the maximum torque of the inverter is 2 times the rated torque of the inverter.
	988	+
	989	+0: Keyboard number given by function code F3.48.
	990	+
	991	+1: AI1 × F3.48 Set by AI1 terminal voltage analog input.
	992	+
	993	+2: AI2 × F3.48 Set by AI2 terminal voltage or current analog input.
	994	+
	995	+3: AI3 × F3.48 is set by the AI3 terminal current input analog.
	996	+
	997	+4: PUL × F3.48 is set by the high-speed pulse input from the PUL terminal.
	998	+
	999	+5: Keyboard potentiometer set × F7.01 by the keyboard potentiometer analog setting.
	1000	+
	1001	+6: RS485 communication set x F3.48 is set by RS485 serial port communication.
	1002	+
	1003	+Note: If the value of 1 to 6 is 100%, it corresponds to the value set by the function code F3.48.
	1004	+
	1005	+|(% rowspan="2" style="text-align:center" %)F3.48|(% style="text-align:center" %)Torque keyboard numeric setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
	1006	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 200.0%
	1007	+
	1008	+When the function code F3.47 = 0, the torque is set by the function code F3.48.
	1009	+
	1010	+|(% rowspan="2" style="text-align:center" %)F3.49|(% style="text-align:center" %)Torque direction selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)00
	1011	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	1012	+Units: torque direction setting
	1013	+
	1014	+0: The torque direction is positive
	1015	+
	1016	+1: The torque direction is negative
	1017	+
	1018	+Tens place: Torque reversing setting
	1019	+
	1020	+0: Torque reversal is allowed
	1021	+
	1022	+1: Torque reversal is prohibited
	1023	+)))
	1024	+
	1025	+LED units place: Torque direction setting
	1026	+
	1027	+0: The torque direction is positive inverter running.
	1028	+
	1029	+1: The torque direction is negative inverter reversal operation.
	1030	+
	1031	+LED tens place: Torque reversing setting
	1032	+
	1033	+0: Allows the torque converter to keep running in one direction.
	1034	+
	1035	+1: The torque reversal inverter can be run in both positive and negative directions.
	1036	+
	1037	+Note: The running direction will not be affected by the F0.16 setting during torque control, and only one direction will be maintained when starting with the keyboard FWD or REV keys.
	1038	+
	1039	+|(% rowspan="2" style="text-align:center" %)F3.50|(% style="text-align:center" %)Upper limit of output torque|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)150.0%
	1040	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F3.51 to 200.0%
	1041	+|(% rowspan="2" style="text-align:center" %)F3.51|(% style="text-align:center" %)Lower limit of output torque|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
	1042	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to F3.50
	1043	+
	1044	+Output torque upper limit: Used to set the output torque upper limit for torque control.
	1045	+
	1046	+Lower output torque limit: Used to set the lower output torque limit during torque control.
	1047	+
	1048	+|(% rowspan="2" style="text-align:center" %)F3.52|(% style="text-align:center; width:311px" %)Torque control forward speed limit selection|(% style="text-align:center; width:168px" %)Factory default|(% style="text-align:center" %)0.10s
	1049	+|(% style="text-align:center; width:311px" %)Setting range|(% colspan="2" style="width:260px" %)(((
	1050	+0: F3.54 is set
	1051	+
	1052	+1: AI1╳F3.54
	1053	+
	1054	+2: AI2╳F3.54
	1055	+
	1056	+3: AI3╳F3.54
	1057	+
	1058	+4: PUL╳F3.54
	1059	+
	1060	+5: Keyboard potentiometer given ╳F3.54
	1061	+
	1062	+6: RS485 communication given ╳F3.54
	1063	+)))
	1064	+
	1065	+It is used to set the maximum forward operating frequency limit of the inverter under the torque control mode.
	1066	+
	1067	+When the converter torque control, if the load torque is less than the motor output torque, the motor speed will continue to rise, in order to prevent mechanical system accidents such as racing, it is necessary to limit the maximum motor speed during torque control.
	1068	+
	1069	+0: Keyboard number given by function code F3.54.
	1070	+
	1071	+1: AI1 × F3.54 Set by AI1 terminal voltage analog input.
	1072	+
	1073	+2: AI2 × F3.54 Set by AI2 terminal voltage analog input.
	1074	+
	1075	+3: AI3 × F3.54 is set by the AI3 terminal current input analog.
	1076	+
	1077	+4: PUL × F3.54 is set by the high-speed pulse input from the PUL terminal.
	1078	+
	1079	+5: Keyboard potentiometer set × F3.54 by the keyboard potentiometer analog setting.
	1080	+
	1081	+6: RS485 communication Set × F3.54 is set by RS485 serial port communication.
	1082	+
	1083	+**✎Note:** If 100% is set in 1 to 6 above, it corresponds to the value set in function code [F3.54].
	1084	+
	1085	+|(% rowspan="2" style="text-align:center" %)F3.53|(% style="text-align:center" %)Torque control reversal speed limit selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
	1086	+|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
	1087	+0: F3.55 is set
	1088	+
	1089	+1: AI1╳F3.55
	1090	+
	1091	+2: AI2╳F3.55
	1092	+
	1093	+3: AI3╳F3.55
	1094	+
	1095	+4: PUL╳F3.55
	1096	+
	1097	+5: Keyboard potentiometer given ╳F3.55
	1098	+
	1099	+6: RS485 communication given ╳F3.55
	1100	+
	1101	+7: Purchase card
	1102	+)))
	1103	+
	1104	+F3.53 is set the same as F3.52, F3.53 is used to limit the speed when reversing, and the corresponding number is given the function code F3.55.
	1105	+
	1106	+|(% rowspan="2" style="text-align:center" %)F3.54|(% style="text-align:center" %)Torque control positive maximum speed limit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.00Hz
	1107	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to Upper limit frequency
	1108	+|(% rowspan="2" style="text-align:center" %)F3.55|(% style="text-align:center" %)Torque control reversal maximum speed limit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.00Hz
	1109	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to Upper limit frequency
	1110	+
	1111	+When function codes F3.52 and F3.53 are set to 0, the maximum speed limit is set by F3.54 and F3.55.
	1112	+
	1113	+|(% rowspan="2" style="text-align:center" %)F3.56|(% style="text-align:center" %)Speed/torque switching delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.01s
	1114	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
	1115	+
	1116	+When the speed/torque mode is switched through terminals DI1 to DI4 or F3.46, the switch can be performed only after the delay time set in F3.56.
	1117	+
	1118	+|(% rowspan="2" style="text-align:center" %)F3.57|(% style="text-align:center" %)Torque acceleration time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.01s
	1119	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
	1120	+|(% rowspan="2" style="text-align:center" %)F3.58|(% style="text-align:center" %)Torque deceleration time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.01s
	1121	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
	1122	+
	1123	+In the torque operation mode, the difference between the output torque of the motor and the load torque determines the speed change rate of the motor and the load. Therefore, electricity
	1124	+
	1125	+The speed of the machine may change rapidly, causing problems such as noise or mechanical overshoot; By setting the torque to control the acceleration and deceleration time, the motor speed can be gently changed. The torque acceleration and deceleration time is based on 2 times the rated torque of the inverter (200%).
	1126	+
	1127	+|(% rowspan="2" style="text-align:center" %)F3.59|(% style="text-align:center" %)Forward and reverse torque dead zone time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
	1128	+|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 650.00s
	1129	+
	1130	+Used for the transition time waiting at 0.0Hz when the direction changes in torque operating mode.
	1131	+
	1132	+

1763023714773-291.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+106.5 KB

Content

1763024398600-482.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+99.1 KB

Content

1763026906844-539.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.2 KB

Content