Changes for page 1 VM Series Manual V1.2

Summary

• Page properties (4 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-WECON VM AC Drive User Manual
	1	+1 VM AC Drive Manual

Parent

...	...	@@ -1,1 +1,1 @@
1		-2\. User Manual.WebHome
	1	+VFD.WebHome

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.admin
	1	+XWiki.Stone

Content

...	...	@@ -1,5 +1,10 @@
1		-= Preface =
	1	+(% class="box infomessage" %)
	2	+(((
	3	+**This is the old version VM series. S/N on the inverter starts from "X0".**
	4	+)))
2	2
	6	+= 1 Preface =
	7	+
3	3	Thank you for choosing WECON VM Series AC Drive.
4	4
5	5	This user manual introduces the technical specifications, installation instructions, functions and performance of VM Series AC Drive properly. Please read this user manual carefully before carrying out works such as installation, commissioning, maintenance, etc.
...	...	@@ -8,9 +8,8 @@
8	8
9	9	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
10	10
	16	+= 2 Safety precautions =
11	11
12		-= Safety precautions =
13		-
14	14	**■ Warning sign**
15	15
16	16	[[image:WECON VM 英文 V01_html_f697a083b5da7fc8.png]] DANGER: Indicates that failure to comply with the notice will result in severe personal injure or even death.
...	...	@@ -17,7 +17,7 @@
17	17
18	18	[[image:WECON VM 英文 V01_html_b36792972403c101.png]] WARNING: Indicates that failure to comply with the notice will result in moderate personal injury, property damage or equipment damage.
19	19
20		-|**WARNING**
	24	+(% class="warning" %)|**WARNING**
21	21	|(((
22	22	◎Do not install or operate any AC Drive that is damaged or with missing parts. Failing to follow this rule can result in facility damage or severe injury.
23	23
...	...	@@ -48,7 +48,7 @@
48	48	◎The PCB board has a CMOS integrated circuit. Do not touch it with your hands, otherwise, static electricity will damage the PCB board.
49	49	)))
50	50
51		-|**DANGER**
	55	+(% class="warning" %)|**DANGER**
52	52	|(((
53	53	◎Wiring must be completed by qualified professional electricians, otherwise, there may be electric shock or damage to the AC Drive.
54	54
...	...	@@ -77,28 +77,28 @@
77	77	◎Modification to the AC Drive without permission is strictly prohibited, otherwise, severe injury may be caused. Arbitrarily modification of AC Drive will result in service warranty invalid.
78	78	)))
79	79
80		-= Chapter 1 Product information =
	84	+= 3 Product information =
81	81
82		-== 1.1 Technical specifications ==
	86	+== Technical specifications ==
83	83
84		-|(% colspan="2" %)**Item**|**Specifications**
	88	+|=(% colspan="2" %)**Item**|=**Specifications**
85	85	|(% rowspan="7" %)Control features|Control mode|V/F control
86	86	|Startup torque|0.5Hz/100%
87		-|Speed range|1：50
	91	+|Speed range|1: 50
88	88	|Speed stability accuracy|±1%
89		-|Carrier frequency|1kHz ～ 6kHz；
	93	+|Carrier frequency|1kHz~~6kHz；
90	90	|Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
91		-|Torque boost|0.0% ～ 30.0%
92		-|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
93		-|Input frequency range|50/60Hz；fluctuation range :±5%
	95	+|Torque boost|0.0%~~30.0%
	96	+|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
	97	+|Input frequency range|50/60Hz；fluctuation range: ±5%
94	94	|Output voltage range|0-input voltage; the error is less than 5%
95		-|Output frequency range|0-400Hz
	99	+|Output frequency range|0~~400Hz
96	96	|(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
97	97	|Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
98	98	|DC braking|(((
99		-Braking time: 0.0s ～ 50.0s;
	103	+Braking time: 0.0s~~50.0s;
100	100
101		-Braking action current value: 0.0% ～ 100.0%
	105	+Braking action current value: 0.0%~~100.0%
102	102	)))
103	103	|Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
104	104	|Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
...	...	@@ -106,7 +106,7 @@
106	106	|Parameters locking function|It can lock the parameters to prevent malfunction.
107	107	|(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
108	108	|Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
109		-|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
	113	+|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
110	110	|Humidity|≤95%RH, without condensing
111	111	|Vibration|Less than 5.9m/s2 (0.6g)
112	112	|Storage temperature|-25℃～+60℃
...	...	@@ -113,92 +113,100 @@
113	113
114	114	Table 1-1-1 Technical specification shee
115	115
116		-== 1.2 Product nameplate ==
	120	+== Product nameplate ==
117	117
118		-[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
	122	+(% style="text-align:center" %)
	123	+(((
	124	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	125	+[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
	126	+)))
119	119
120		-Figure 1-2-1 Product nameplate
121	121
122		-== 1.3 Model description ==
	129	+== Model description ==
123	123
124	124	__VM__ – __2__ __S__ __1R5GB__
125	125
126	126	①  ② ③  ④
127	127
128		-|**Field**|**No.**|**Identification**|**Description**
	135	+|=**Field**|=**No.**|=**Identification**|=**Description**
129	129	|Product series|①|Product series|VM series
130		-|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
131		-|The input power|③|Power phase identification|S: single ； T: three-phase
	137	+|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
	138	+|The input power|③|Power phase identification|S: single; T: three-phase
132	132	|Rated power|④|Power range|1R5-1.5kW，R is the decimal point
133	133
134	134	Table 1-3-1 VM series model field comment
135	135
136		-== 1.4 Product model ==
	143	+== Product model ==
137	137
138		-|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
139		-|kW|kVA|A|A|kW|HP
140		-|VM-2SR75|0.75|1.5|8.2|4|0.75|1
141		-|VM-2S1R5|1.5|3|14.2|7|1.5|2
142		-|VM-2S2R2|2.2|4|23|9.6|2.2|3
143		-|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
144		-|VM-4T004|4|5.9|10.5|9|4/|5.5
145		-|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
146		-|VM-4T7R5|7.5|11|20.5|17|7.5|10
147		-|VM-4T011*|11|17|26|25|11|15
148		-|VM-4T015*|15|21|35|32|15|20
	145	+|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
	146	+|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
	147	+|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
	148	+|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
	149	+|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
	150	+|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
	151	+|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
	152	+|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
	153	+|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
	154	+|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
	155	+|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
149	149
150	150	Table 1-4-1 Product model table
151	151
	159	+(% class="box infomessage" %)
	160	+(((
152	152	*:In development
	162	+)))
153	153
	164	+= 4 Installation =
154	154
155		-= Chapter 2 Installation =
	166	+== Overall structural drawing ==
156	156
157		-== 2.1 Overall structural drawing（unit：mm） ==
	168	+(% class="wikigeneratedid" %)
	169	+unit: mm
158	158
159		-[[image:1624240220324-243.png]]
	171	+(% style="text-align:center" %)
	172	+(((
	173	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	174	+[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
	175	+)))
160	160
161		-Figure 2-1-1 Outline dimension diagram
162	162
163		-|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
164		-|H|W|D|H1|W1|d
165		-|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
166		-|VM-2S1R5
167		-|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
168		-|VM-4T2R2
169		-|VM-4T004|196|95|132|179|79|5.5
170		-|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
171		-|VM-4T7R5
172		-|VM-4T011|-|-|-|-|-|-
173		-|VM-4T015|-|-|-|-|-|-
	178	+(% style="width:1271.22px" %)
	179	+|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
	180	+|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
	181	+|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
	182	+|=(% style="width: 267px;" %)VM-2S1R5
	183	+|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
	184	+|=(% style="width: 267px;" %)VM-4T2R2
	185	+|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
	186	+|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
	187	+|=(% style="width: 267px;" %)VM-4T7R5
	188	+|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
	189	+|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
174	174
175	175	Table 2-1-1 outline dimension
176	176
177		-== 2.2 Terminal connection ==
	193	+== Terminal connection ==
178	178
	195	+(% style="text-align:center" %)
	196	+(((
	197	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	198	+[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
	199	+)))
179	179
180		-[[image:1624240272484-903.png]]
181	181
182		-Figure 2-2-1 Terminal connection
	202	+**Main circuit connection**
183	183
	204	+|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
	205	+|=R、S、T|Power supply input terminals|Connect to the AC power supply
	206	+|=U、V、W|AC drive output terminals|Connect the three-phase motor.
	207	+|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
184	184
185		-
186		-
187		-
188		-
189		-
190		-* **Main circuit connection**
191		-
192		-|**Terminal mark**|**Name**|**Description**
193		-|R、S、T|Power supply input terminals|Connect to the AC power supply
194		-|U、V、W|AC drive output terminals|Connect the three-phase motor.
195		-|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
196		-
197	197	Table 2-2-1 Main circuit terminals and function
198	198
199		-* **Control circuit connection**
	211	+**Control circuit connection**
200	200
201		-|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
	213	+|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
202	202	|(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
203	203	Provide +10V power supply to external unit.
204	204
...	...	@@ -216,320 +216,347 @@
216	216
217	217	Table 2-2-2 Control terminal instruction
218	218
219		-= Chapter 3 Display and operation =
	231	+= 5 Display and operation =
220	220
221		-== 3.1 Keypad ==
	233	+== Keypad ==
222	222
223	223	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
224	224
225		-[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
	237	+(% style="text-align:center" %)
	238	+(((
	239	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	240	+[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
	241	+)))
226	226
227		-Figure 3-1-1 Keypad diagram
228	228
229		-== 3.2 Description of indicators and keys ==
	244	+== Description of indicators and keys ==
230	230
231		-|**Item**|**Name**|**Function**
232		-|Indicator|Status|(((
233		-* RUN： ON/Running；OFF/Stop.
234		-* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
235		-* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
236		-* ALARM：Blinking /Fault state.
	246	+|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
	247	+|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
	248	+* RUN: ON/Running; OFF/Stop.
	249	+* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
	250	+* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
	251	+* ALARM: Blinking /Fault state.
237	237	)))
238		-|(% rowspan="6" %)keys|(((
239		-PRG
240		-
241		-(Programming)
242		-)))|Enter or exit the first menu.
243		-|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
244		-|△（Increment）|Increase date or function code.
245		-|▽（Decrement）|Decrease data or function code.
246		-|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
247		-|RUN/STOP|(((
	253	+|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
	254	+PRG (Programming)
	255	+)))|(% style="width:865px" %)Enter or exit the first menu.
	256	+|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
	257	+|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
	258	+|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
	259	+|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	260	+|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
248	248	Control drive start and stop in keypad control mode.
249	249
250	250	Perform the reset operation when it is in the fault state.
251	251	)))
252		-|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
	265	+|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
253	253
254	254	Table 3-2-1 Description of Indicators and key
255	255
	269	+= 6 Parameter function =
256	256
257		-= Chapter 4 Parameter function =
	271	+* “○”: the parameter can be modified in both standby and operating state；
	272	+* “●”: the parameter can’t be modified in operating state；
	273	+* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
258	258
259		-“○”: the parameter can be modified in both standby and operating state；
	275	+(% class="box infomessage" %)
	276	+(((
	277	+**Note: **the communication address is hexadecimal.
	278	+)))
260	260
261		-“●”: the parameter can’t be modified in operating state；
	280	+== Functional parameter ==
262	262
263		-“◎”:the parameter is the actual detected and recorded value which can’t be modified；
264		-
265		-Note: the communication address is hexadecimal.
266		-
267		-
268		-== 4.1 Functional parameter ==
269		-
270		-|Parameter|Name|Setting Range|Default|Property|Address
271		-|F0.00|Reserved|Reserved|0|●|0000
272		-|F0.01|Command source selection|0：Operation panel control（LED off）
273		-1：Terminal control（LED on）
274		- 2：Communication LED (LED blinking）|0|●|0001
275		-|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
276		- 1：Digital setting (retentive at power failure)
277		- 2：Keypad Knob
278		- 3：AI
279		- 4：Multi-stage speed
280		- 5：Simple PLC
281		- 6：Communication|2|●|0002
282		-|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
283		-|F0.04|Running direction selection|0：Forward
284		- 1：Reverse|0|○|0004
285		-|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
286		-|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
287		-|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
288		-|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
289		-1：Stop
290		-2：Standby|0|○|0008
291		-|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
292		-|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
293		-|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
294		-|F0.12|Stop Mode|0：Decelerate to stop
295		- 1：Free stop|0|○|000C
296		-|F0.13|Retentive of digital setting frequency|0：No retentive
297		-1：retentive|1|●|000D
298		-|F0.14|Fan operating mode|0：Run when motor is running
299		- 1：Keep run when power on|0|○|000E
300		-|F0.15|AI1 Input Option|(((
301		-0：0-10V
302		-
303		-1：4-20mA
304		-
305		-2: 0-20mA
306		-
307		-3：0-5V
308		-
309		-4：0.5-4.5V
310		-)))|0|○|000F
311		-|F1.00|Default Setting Restoring|0：No Operation
312		- 1：Restore to factory default setting (not including F2 parameters)
313		- 2：Clear error records|0|●|0100
314		-|F1.01|Parameters Lockup|0：Invalid
315		- 1：Valid|0|○|0101
316		-|F1.02|User Password|0～65000|0|○|0102
317		-|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
318		-|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
319		-|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
320		-|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
321		-|F2.05|Type of Motor|(((
322		-0：Single Phase
323		-
324		-1：Three Phase
325		-)))|0|●|0205
326		-|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
327		-|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
328		-|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
329		-|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
330		-|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
331		-|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
332		-|F4.04|The current of DC braking at stop|0～100%|0|○|0404
333		-|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
334		-|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
335		-|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
336		-|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
337		-0: No function
338		-
339		-1: Forward running (FWD)
340		-
341		-2: Reverse running (REV)
342		-
343		-3: Three-wire operation control
344		-
345		-4: Forward point movement (FJOG)
346		-
347		-5: Reverse point movement (RJOG)
348		-6:Error Reset
349		- 7:Terminal UP
350		- 8:Terminal Down
351		- 9:UP/DOWN Setting Clear
352		- 10:External error input(Normally Open)
353		- 11：PLC Status reset
354		- 12:Multi stage speed terminal 1
355		- 13: Multi stage speed terminal 2
356		- 14:Reserved
357		-)))|1|●|0500
358		-|F5.01|DI2 terminal function selection|2|●|0501
359		-|F5.02|DI3 terminal function selection|6|●|0502
360		-|F5.03|DI4 terminal function selection|0|●|0503
361		-|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
362		-|F5.05|Terminal Command Option|0: Two-line mode 1
363		-1: Two-line mode 2
364		- 2: Three-line mode 1
365		-3: Three-line mode 2|0|●|0505
366		-|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
367		-|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
368		-|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
369		-|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
370		-|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
371		-|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
372		-|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
373		-|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
374		-|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
375		-|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
376		-|F5.16|AI Input Digital Functional Option|(((
377		-0: No function
378		-
379		-1: Forward running (FWD)
380		-
381		-2: Reverse running (REV)
382		-
383		-3: Three-wire operation control
384		-
385		-4: Forward point movement (FJOG)
386		-
387		-5: Reverse point movement (RJOG)
388		-6:Error Reset
389		- 7:Terminal UP
390		- 8:Terminal Down
391		- 9:UP/DOWN Setting Clear
392		- 10:External error input(Normally Open)
393		- 11：PLC Status reset
394		- 12:Multi stage speed terminal 1
395		- 13: Multi stage speed terminal 2
396		- 14:Reserved
397		-)))|0|●|0510
398		-|F5.17|AI Input Valid Level Option|(((
399		-0：Low Level Valid
400		-
401		-1：High Level Valid
402		-)))|1|○|0511
403		-|F6.00|Relay Output Option|0：No Output
404		- 1：VFD Running
405		- 2：Error Output(Output is valid only after VFD stops)
406		- 3：Ready for Running
407		- 4：Communication Setting
408		- 5: User Defined Output|0|○|0600
409		-|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
410		-|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
411		-|F6.03|(((
	282	+|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 196px;" %)Default|=(% style="width: 64px;" %)Property|=(% style="width: 87px;" %)Address
	283	+|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0000
	284	+|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
	285	+* 0：Operation panel control（LED off）
	286	+* 1：Terminal control（LED on）
	287	+* 2：Communication LED (LED blinking）
	288	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0001
	289	+|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
	290	+* 0：Digital setting (non-retentive at power failure)
	291	+* 1：Digital setting (retentive at power failure)
	292	+* 2：Keypad Knob
	293	+* 3：AI
	294	+* 4：Multi-stage speed
	295	+* 5：Simple PLC
	296	+* 6：Communication
	297	+)))|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0002
	298	+|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0003
	299	+|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
	300	+* 0：Forward
	301	+* 1：Reverse
	302	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0004
	303	+|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)●|(% style="width:87px" %)0005
	304	+|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0006
	305	+|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:196px" %)0.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0007
	306	+|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
	307	+* 0：Running at frequency lower limit
	308	+* 1：Stop
	309	+* 2：Standby
	310	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0008
	311	+|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:196px" %)6.0kHz|(% style="width:64px" %)●|(% style="width:87px" %)0009
	312	+|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000A
	313	+|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000B
	314	+|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
	315	+* 0：Decelerate to stop
	316	+* 1：Free stop
	317	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000C
	318	+|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
	319	+* 0：No retentive
	320	+* 1：retentive
	321	+)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)000D
	322	+|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
	323	+* 0：Run when motor is running
	324	+* 1：Keep run when power on
	325	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000E
	326	+|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
	327	+* 0: 0-10V
	328	+* 1: 4-20mA
	329	+* 2: 0-20mA
	330	+* 3: 0-5V
	331	+* 4: 0.5-4.5V
	332	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000F
	333	+|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
	334	+* 0: No Operation
	335	+* 1: Restore to factory default setting (not including F2 parameters)
	336	+* 2: Clear error records
	337	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0100
	338	+|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
	339	+* 0: Invalid
	340	+* 1: Valid
	341	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0101
	342	+|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0102
	343	+|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0200
	344	+|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0201
	345	+|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0202
	346	+|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0203
	347	+|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
	348	+* 0: Single Phase
	349	+* 1: Three Phase
	350	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0205
	351	+|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:196px" %)80|(% style="width:64px" %)○|(% style="width:87px" %)0206
	352	+|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:196px" %)130|(% style="width:64px" %)○|(% style="width:87px" %)0207
	353	+|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:196px" %)4.0%|(% style="width:64px" %)○|(% style="width:87px" %)0400
	354	+|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.00Hz|(% style="width:64px" %)●|(% style="width:87px" %)0401
	355	+|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)0.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0402
	356	+|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0403
	357	+|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0404
	358	+|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0405
	359	+|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
	360	+* 0: Invalid;
	361	+* 1: Valid
	362	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0406
	363	+|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
	364	+* 0: Valid;
	365	+* 1: Invalid
	366	+)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0407
	367	+|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
	368	+* 0: No function
	369	+* 1: Forward running (FWD)
	370	+* 2: Reverse running (REV)
	371	+* 3: Three-wire operation control
	372	+* 4: Forward point movement (FJOG)
	373	+* 5: Reverse point movement (RJOG)
	374	+* 6: Error Reset
	375	+* 7: Terminal UP
	376	+* 8: Terminal Down
	377	+* 9: UP/DOWN Setting Clear
	378	+* 10: External error input(Normally Open)
	379	+* 11: PLC Status reset
	380	+* 12: Multi stage speed terminal 1
	381	+* 13: Multi stage speed terminal 2
	382	+* 14: Reserved
	383	+)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0500
	384	+|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0501
	385	+|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:196px" %)6|(% style="width:64px" %)●|(% style="width:87px" %)0502
	386	+|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0503
	387	+|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:196px" %)0.010s|(% style="width:64px" %)○|(% style="width:87px" %)0504
	388	+|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
	389	+* 0: Two-line mode 1
	390	+* 1: Two-line mode 2
	391	+* 2: Three-line mode 1
	392	+* 3: Three-line mode 2
	393	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0505
	394	+|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:196px" %)0.50Hz|(% style="width:64px" %)○|(% style="width:87px" %)0506
	395	+|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:196px" %)0.00V|(% style="width:64px" %)○|(% style="width:87px" %)0507
	396	+|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)0508
	397	+|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:196px" %)10.00V|(% style="width:64px" %)○|(% style="width:87px" %)0509
	398	+|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)100.0%|(% style="width:64px" %)○|(% style="width:87px" %)050A
	399	+|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:196px" %)0.10s|(% style="width:64px" %)○|(% style="width:87px" %)050B
	400	+|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050C
	401	+|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050D
	402	+|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050E
	403	+|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050F
	404	+|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
	405	+* 0: No function
	406	+* 1: Forward running (FWD)
	407	+* 2: Reverse running (REV)
	408	+* 3: Three-wire operation control
	409	+* 4: Forward point movement (FJOG)
	410	+* 5: Reverse point movement (RJOG)
	411	+* 6: Error Reset
	412	+* 7: Terminal UP
	413	+* 8: Terminal Down
	414	+* 9: UP/DOWN Setting Clear
	415	+* 10: External error input(Normally Open)
	416	+* 11: PLC Status reset
	417	+* 12: Multi stage speed terminal 1
	418	+* 13: Multi stage speed terminal 2
	419	+* 14: Reserved
	420	+)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0510
	421	+|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
	422	+* 0: Low Level Valid
	423	+* 1: High Level Valid
	424	+)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0511
	425	+|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
	426	+* 0: No Output
	427	+* 1: VFD Running
	428	+* 2: Error Output(Output is valid only after VFD stops)
	429	+* 3: Ready for Running
	430	+* 4: Communication Setting
	431	+* 5: User Defined Output
	432	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0600
	433	+|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0601
	434	+|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0602
	435	+|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
412	412	User defined output
413	413
414	414	Variability option（EX）
415		-)))|0：Running Frequency
416		- 1：Set Frequency
417		- 2：Bus Voltage
418		- 3：Output Voltage
419		- 4：Output Current|0|○|0603
420		-|F6.04|User defined comparison method|Units digit：comparison test method
421		-0: Equal (EX==X1)
422		-1: Equal or greater than
423		-2: Equal or less than
424		-3 Interval comparison (X1≤EX≤X2)
425		-4:Units digit test (EX&X1=X2)
	439	+)))|(% style="width:428px" %)(((
	440	+* 0: Running Frequency
	441	+* 1: Set Frequency
	442	+* 2: Bus Voltage
	443	+* 3: Output Voltage
	444	+* 4: Output Current
	445	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0603
	446	+|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
	447	+* 0: Equal (EX==X1)
	448	+* 1: Equal or greater than
	449	+* 2: Equal or less than
	450	+* 3: Interval comparison (X1≤EX≤X2)
	451	+* 4: Units digit test (EX&X1=X2)
	452	+
426	426	Tens digit: output method
427		- 0: False value output
428		-1: Real value output|0|○|0604
429		-|F6.05|User defined output dead zone|0～65535|0|○|0605
430		-|F6.06|(((
	454	+
	455	+* 0: False value output
	456	+* 1: Real value output
	457	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0604
	458	+|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0605
	459	+|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
431	431	User-defined output
432	432
433	433	comparison value 1
434		-)))|0～65535|0|○|0606
435		-|F6.07|(((
	463	+)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0606
	464	+|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
436	436	User-defined output
437	437
438	438	comparison value 2
439		-)))|0～65535|0|○|0607
440		-|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
441		- 1：Set Frequency（0～F0.05）
442		- 2：Output Current（0～Double Rated Current of VFD）
443		- 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
444		- 4：AI（0～10V）
445		- 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
446		-|F6.09|AO2 Output Option|0|○|0609
447		-|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
448		-|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
449		-|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
450		-|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
451		-|F7.00|Reserved|Reserved|0|○|0700
452		-|F7.01|STOP Button Function|0：Valid only at keypad control mode
453		- 1：Valid at all control modes|1|○|0701
454		-|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
455		-Bit0：Running Frequency(Hz)
456		- Bit1：Set Frequency(Hz)
457		- Bit2：Bus Voltage(V)
458		- Bit3：Output Voltage(V)
459		- Bit4：Output Current(A)
460		- Bit5：DI Input Status
461		- Bit6：DO Output Status
462		- Bit7：Keypad Knob Voltage(V)
	468	+)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0607
	469	+|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
	470	+* 0: Running Frequency（0～F0.05）
	471	+* 1: Set Frequency（0～F0.05）
	472	+* 2: Output Current（0～Double Rated Current of VFD）
	473	+* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
	474	+* 4: AI（0～10V）
	475	+* 5: Bus Voltage（0～500.0/1000.0V）
	476	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0608
	477	+|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0609
	478	+|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060A
	479	+|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060B
	480	+|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060C
	481	+|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060D
	482	+|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0700
	483	+|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
	484	+* 0: Valid only at keypad control mode
	485	+* 1: Valid at all control modes
	486	+)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0701
	487	+|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
	488	+* Bit0: Running Frequency(Hz)
	489	+* Bit1: Set Frequency(Hz)
	490	+* Bit2: Bus Voltage(V)
	491	+* Bit3: Output Voltage(V)
	492	+* Bit4: Output Current(A)
	493	+* Bit5: DI Input Status
	494	+* Bit6: DO Output Status
	495	+* Bit7: Keypad Knob Voltage(V)
	496	+* Bit8: AIVoltage(V)
	497	+* Bit9: Load Speed
	498	+* Bit10: PID Set Value
	499	+* Bit11: PID Feedback Value
	500	+* Bit12: PLC Stage
	501	+* Bit13: Feedback Frequency（Unit：0.1Hz)
	502	+* Bit14: Communication Set Value
	503	+* Bit15: Main Frequency Source X
	504	+)))|(% style="width:196px" %)0x1F|(% style="width:64px" %)○|(% style="width:87px" %)0702
	505	+|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:196px" %)0x06|(% style="width:64px" %)○|(% style="width:87px" %)0703
	506	+|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:196px" %)3.000|(% style="width:64px" %)○|(% style="width:87px" %)0704
	507	+|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:196px" %)-|(% style="width:64px" %)◎|(% style="width:87px" %)0705
	508	+|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)2.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0800
	509	+|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0801
	510	+|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0802
	511	+|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0803
	512	+|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
	513	+* 0: valid
	514	+* 1: invalid
	515	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0804
	516	+|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0805
	517	+|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
	518	+* 0：Invalid
	519	+* 1：Valid
	520	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0806
	521	+|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
	522	+* 0: Invalid
	523	+* 1: Valid
	524	+)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0807
	525	+|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C00
	526	+|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
	527	+* 0: 4800bPS
	528	+* 1: 9600bPS
	529	+* 2: 19200bPS
	530	+)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C01
	531	+|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
	532	+* 0: No check, data format (8.N.1)
	533	+* 1: Odd Parity check, data format (8.O.1)
	534	+* 2: Even parity check, data format (8.E.1)
	535	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0C02
	536	+|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:196px" %)2|(% style="width:64px" %)○|(% style="width:87px" %)0C03
	537	+|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0C04
	538	+|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D00
	539	+|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D01
	540	+|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D02
	541	+|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D03
	542	+|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
	543	+* 0: Stop after the AC Drive runs one cycle
	544	+* 1: Keep final values after the AC Drive runs one cycle
	545	+* 2: Repeat after the AC Drive runs one cycle
	546	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D04
	547	+|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
	548	+Tens Digit：(((
	549	+* 0: Invalid
	550	+* 1: Valid
	551	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D05
	552	+|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D06
	553	+|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D07
	554	+|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D08
	555	+|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D09
	556	+|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0A
	557	+|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0B
	558	+|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0C
	559	+|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0D
	560	+|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
	561	+* 0: s（second）
	562	+* 1: h（hour）
	563	+* 2: min（minute）
	564	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0E
	565	+|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
	566	+* 0: Set by FD.00
	567	+* 1: AI
	568	+)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0F
463	463
464		-Bit8：AIVoltage(V)
465		- Bit9：Load Speed
466		- Bit10：PID Set Value
467		- Bit11：PID Feedback Value
468		- Bit12：PLC Stage
469		- Bit13：Feedback Frequency（Unit：0.1Hz)
	570	+== Monitoring Parameters ==
470	470
471		-Bit14：Communication Set Value
472		- Bit15：Main Frequency Source X
473		-)))|0x1F|○|0702
474		-|F7.03|LED display parameters at stop status|0x06|○|0703
475		-|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
476		-|F7.05|Software Version|-|-|◎|0705
477		-|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
478		-|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
479		-|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
480		-|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
481		-|F8.04|Reverse control|(((
482		-0：valid
483		-
484		-1：invalid
485		-)))|0|○|0804
486		-|F8.05|Reserved|0|0|●|0805
487		-|F8.06|Startup Protection Option|0：Invalid
488		- 1：Valid|0|○|0806
489		-|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
490		-|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
491		-|FC.01|Baud Rate|0：4800bPS
492		- 1：9600bPS
493		- 2：19200bPS|1|○|0C01
494		-|FC.02|Data format|0：No check, data format (8.N.1)
495		- 1：Odd Parity check, data format (8.O.1)
496		- 2：Even parity check, data format (8.E.1)|0|○|0C02
497		-|FC.03|Respond Delay|0ms～20ms|2|○|0C03
498		-|FC.04|Reserved|0|0|●|0C04
499		-|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
500		-|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
501		-|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
502		-|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
503		-|FD.04|Simple PLC running mode|(((
504		-0:Stop after the AC Drive runs one cycle
505		-
506		-1:Keep final values after the AC Drive runs one cycle
507		-
508		-2:Repeat after the AC Drive runs one cycle
509		-)))|0|○|0D04
510		-|FD.05|Simple PLC retentive option|Units Digit：Reserved
511		- Tens Digit：
512		- 0：Invalid
513		- 1：Valid|0|○|0D05
514		-|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
515		-|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
516		-|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
517		-|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
518		-|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
519		-|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
520		-|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
521		-|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
522		-|FD.14|Time unit of simple PLC running|0：s（second）
523		- 1：h（hour）
524		- 2：min（minute）|0|○|0D0E
525		-|FD.15|The source of multistage speed 0|(((
526		-0：Set by FD.00
527		-
528		-1：AI
529		-)))|0|○|0D0F
530		-
531		-== 4.2 Monitoring Parameters ==
532		-
533	533	|Parameter|Name|Minimum Unit|Priority|Address
534	534	|D0.00|Running Frequency(Hz)|0.01Hz|◎|D000
535	535	|D0.01|Set Frequency(Hz)|0.01Hz|◎|D001
...	...	@@ -545,7 +545,7 @@
545	545	|D0.13|PLC Stage|1|◎|D013
546	546	|D0.14|Feedback Speed(Unit0.1Hz)|0.1Hz|◎|D014
547	547
548		-== 4.3 Error Records ==
	587	+== Error Records ==
549	549
550	550	|Parameter|Name|Range and Description|Priority|Address
551	551	|E0.00|Latest error type|No Error:0
...	...	@@ -575,11 +575,11 @@
575	575	|E1.04|Input terminals status at former error|0-63|●|　E104
576	576	|E1.05|IGBT temperature at former error|0-65535|●|　E105
577	577
578		-= Chapter5 Communication Protocol =
	617	+= 7 Communication Protocol =
579	579
580	580	VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
581	581
582		-== 5.1 Communication Control Address ==
	621	+== Communication Control Address ==
583	583
584	584	|Function|Address|Description|Remarks|Characteristic
585	585	|Communication Set Value|1000H|-10000～10000（with ± sign）|F0.05*（±100.00%）|R/W
...	...	@@ -630,7 +630,7 @@
630	630
631	631	Sheet 5-1-1 Control Command Addresses
632	632
633		-== 5.2 EEPROM Addresses Introduction ==
	672	+== EEPROM Addresses Introduction ==
634	634
635	635	The addresses listed in the sheet above is the way of writing RAM. The RAM stores the data after power-off and does not save it. In the communication mode, for the write command "06H", if the parameter needs to be stored after power-off, the method of writing EEPROM should be used. The original "0" of the most significant bit of the RAM address is changed to "F", which is converted into the corresponding EEPROM address, for example: "0XXX" is changed to "FXXX"
636	636
...	...	@@ -642,9 +642,9 @@
642	642
643	643	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
644	644
645		-= Chapter 6 Troubleshooting & countermeasures =
	684	+= 8 Troubleshooting & countermeasures =
646	646
647		-== 6.1 Faults and solutions ==
	686	+== Faults and solutions ==
648	648
649	649	|Fault code|Fault type|Reason|Solution
650	650	|Err02|Overcurrent during acceleration|(((
...	...	@@ -797,9 +797,8 @@
797	797
798	798	Table 6-1-1 Faults and solutions
799	799
	839	+== Common faults and solutions ==
800	800
801		-== 6.2 Common faults and solutions ==
802		-
803	803	|**SN**|**Fault**|**Possible causes**|**Solutions**
804	804	|1|No display at power-on state|(((
805	805	~1. The input power of AC Drive is abnormal.
...	...	@@ -881,10 +881,3 @@
881	881	)))
882	882
883	883	Table 6-2-1 Common faults and solutions
884		-
885		-
886		-(((
887		-
888		-)))
889		-
890		-