Changes for page 1 VM Series Manual V1.2

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-1 VM Series Manual V1.2
	1	+1 VM AC Drive Manual

Content

...	...	@@ -1,10 +1,5 @@
1		-(% class="box infomessage" %)
2		-(((
3		-**This is VM series V1.2. S/N on the inverter starts from "X0".**
4		-)))
	1	+= Preface =
5	5
6		-= 1 Preface =
7		-
8	8	Thank you for choosing WECON VM Series AC Drive.
9	9
10	10	This user manual introduces the technical specifications, installation instructions, functions and performance of VM Series AC Drive properly. Please read this user manual carefully before carrying out works such as installation, commissioning, maintenance, etc.
...	...	@@ -13,8 +13,9 @@
13	13
14	14	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
15	15
16		-= 2 Safety precautions =
17	17
	12	+= Safety precautions =
	13	+
18	18	**■ Warning sign**
19	19
20	20	[[image:WECON VM 英文 V01_html_f697a083b5da7fc8.png]] DANGER: Indicates that failure to comply with the notice will result in severe personal injure or even death.
...	...	@@ -21,7 +21,7 @@
21	21
22	22	[[image:WECON VM 英文 V01_html_b36792972403c101.png]] WARNING: Indicates that failure to comply with the notice will result in moderate personal injury, property damage or equipment damage.
23	23
24		-(% class="warning" %)|**WARNING**
	20	+|**WARNING**
25	25	|(((
26	26	◎Do not install or operate any AC Drive that is damaged or with missing parts. Failing to follow this rule can result in facility damage or severe injury.
27	27
...	...	@@ -52,7 +52,7 @@
52	52	◎The PCB board has a CMOS integrated circuit. Do not touch it with your hands, otherwise, static electricity will damage the PCB board.
53	53	)))
54	54
55		-(% class="warning" %)|**DANGER**
	51	+|**DANGER**
56	56	|(((
57	57	◎Wiring must be completed by qualified professional electricians, otherwise, there may be electric shock or damage to the AC Drive.
58	58
...	...	@@ -81,28 +81,28 @@
81	81	◎Modification to the AC Drive without permission is strictly prohibited, otherwise, severe injury may be caused. Arbitrarily modification of AC Drive will result in service warranty invalid.
82	82	)))
83	83
84		-= 3 Product information =
	80	+= Chapter 1 Product information =
85	85
86		-== Technical specifications ==
	82	+== 1.1 Technical specifications ==
87	87
88		-|=(% colspan="2" %)**Item**|=**Specifications**
	84	+|(% colspan="2" %)**Item**|**Specifications**
89	89	|(% rowspan="7" %)Control features|Control mode|V/F control
90	90	|Startup torque|0.5Hz/100%
91		-|Speed range|1: 50
	87	+|Speed range|1：50
92	92	|Speed stability accuracy|±1%
93		-|Carrier frequency|1kHz~~6kHz；
	89	+|Carrier frequency|1kHz ～ 6kHz；
94	94	|Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
95		-|Torque boost|0.0%~~30.0%
96		-|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
97		-|Input frequency range|50/60Hz；fluctuation range: ±5%
	91	+|Torque boost|0.0% ～ 30.0%
	92	+|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
	93	+|Input frequency range|50/60Hz；fluctuation range :±5%
98	98	|Output voltage range|0-input voltage; the error is less than 5%
99		-|Output frequency range|0~~400Hz
	95	+|Output frequency range|0-400Hz
100	100	|(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
101	101	|Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
102	102	|DC braking|(((
103		-Braking time: 0.0s~~50.0s;
	99	+Braking time: 0.0s ～ 50.0s;
104	104
105		-Braking action current value: 0.0%~~100.0%
	101	+Braking action current value: 0.0% ～ 100.0%
106	106	)))
107	107	|Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
108	108	|Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
...	...	@@ -110,7 +110,7 @@
110	110	|Parameters locking function|It can lock the parameters to prevent malfunction.
111	111	|(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
112	112	|Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
113		-|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
	109	+|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
114	114	|Humidity|≤95%RH, without condensing
115	115	|Vibration|Less than 5.9m/s2 (0.6g)
116	116	|Storage temperature|-25℃～+60℃
...	...	@@ -117,100 +117,92 @@
117	117
118	118	Table 1-1-1 Technical specification shee
119	119
120		-== Product nameplate ==
	116	+== 1.2 Product nameplate ==
121	121
122		-(% style="text-align:center" %)
123		-(((
124		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
125		-[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
126		-)))
	118	+[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
127	127
	120	+Figure 1-2-1 Product nameplate
128	128
129		-== Model description ==
	122	+== 1.3 Model description ==
130	130
131	131	__VM__ – __2__ __S__ __1R5GB__
132	132
133	133	①  ② ③  ④
134	134
135		-|=**Field**|=**No.**|=**Identification**|=**Description**
	128	+|**Field**|**No.**|**Identification**|**Description**
136	136	|Product series|①|Product series|VM series
137		-|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
138		-|The input power|③|Power phase identification|S: single; T: three-phase
	130	+|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
	131	+|The input power|③|Power phase identification|S: single ； T: three-phase
139	139	|Rated power|④|Power range|1R5-1.5kW，R is the decimal point
140	140
141	141	Table 1-3-1 VM series model field comment
142	142
143		-== Product model ==
	136	+== 1.4 Product model ==
144	144
145		-|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
146		-|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
147		-|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
148		-|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
149		-|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
150		-|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
151		-|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
152		-|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
153		-|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
154		-|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
155		-|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
	138	+|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
	139	+|kW|kVA|A|A|kW|HP
	140	+|VM-2SR75|0.75|1.5|8.2|4|0.75|1
	141	+|VM-2S1R5|1.5|3|14.2|7|1.5|2
	142	+|VM-2S2R2|2.2|4|23|9.6|2.2|3
	143	+|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
	144	+|VM-4T004|4|5.9|10.5|9|4/|5.5
	145	+|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
	146	+|VM-4T7R5|7.5|11|20.5|17|7.5|10
	147	+|VM-4T011*|11|17|26|25|11|15
	148	+|VM-4T015*|15|21|35|32|15|20
156	156
157	157	Table 1-4-1 Product model table
158	158
159		-(% class="box infomessage" %)
160		-(((
161	161	*:In development
162		-)))
163	163
164		-= 4 Installation =
165	165
166		-== Overall structural drawing ==
	155	+= Chapter 2 Installation =
167	167
168		-(% class="wikigeneratedid" %)
169		-unit: mm
	157	+== 2.1 Overall structural drawing（unit：mm） ==
170	170
171		-(% style="text-align:center" %)
172		-(((
173		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
174		-[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
175		-)))
	159	+[[image:1624240220324-243.png]]
176	176
	161	+Figure 2-1-1 Outline dimension diagram
177	177
178		-(% style="width:1271.22px" %)
179		-|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
180		-|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
181		-|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
182		-|=(% style="width: 267px;" %)VM-2S1R5
183		-|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
184		-|=(% style="width: 267px;" %)VM-4T2R2
185		-|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
186		-|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
187		-|=(% style="width: 267px;" %)VM-4T7R5
188		-|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
189		-|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
	163	+|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
	164	+|H|W|D|H1|W1|d
	165	+|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
	166	+|VM-2S1R5
	167	+|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
	168	+|VM-4T2R2
	169	+|VM-4T004|196|95|132|179|79|5.5
	170	+|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
	171	+|VM-4T7R5
	172	+|VM-4T011|-|-|-|-|-|-
	173	+|VM-4T015|-|-|-|-|-|-
190	190
191	191	Table 2-1-1 outline dimension
192	192
193		-== Terminal connection ==
	177	+== 2.2 Terminal connection ==
194	194
195		-(% style="text-align:center" %)
196		-(((
197		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
198		-[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
199		-)))
200	200
	180	+[[image:1624240272484-903.png]]
201	201
202		-**Main circuit connection**
	182	+Figure 2-2-1 Terminal connection
203	203
204		-|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
205		-|=R、S、T|Power supply input terminals|Connect to the AC power supply
206		-|=U、V、W|AC drive output terminals|Connect the three-phase motor.
207		-|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
208	208
	185	+
	186	+
	187	+
	188	+
	189	+
	190	+* **Main circuit connection**
	191	+
	192	+|**Terminal mark**|**Name**|**Description**
	193	+|R、S、T|Power supply input terminals|Connect to the AC power supply
	194	+|U、V、W|AC drive output terminals|Connect the three-phase motor.
	195	+|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
	196	+
209	209	Table 2-2-1 Main circuit terminals and function
210	210
211		-**Control circuit connection**
	199	+* **Control circuit connection**
212	212
213		-|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
	201	+|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
214	214	|(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
215	215	Provide +10V power supply to external unit.
216	216
...	...	@@ -228,450 +228,421 @@
228	228
229	229	Table 2-2-2 Control terminal instruction
230	230
231		-= 5 Display and operation =
	219	+= Chapter 3 Display and operation =
232	232
233		-== Keypad ==
	221	+== 3.1 Keypad ==
234	234
235	235	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
236	236
237		-(% style="text-align:center" %)
238		-(((
239		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
240		-[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
241		-)))
	225	+[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
242	242
	227	+Figure 3-1-1 Keypad diagram
243	243
244		-== Description of indicators and keys ==
	229	+== 3.2 Description of indicators and keys ==
245	245
246		-|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
247		-|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
248		-* RUN: ON/Running; OFF/Stop.
249		-* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
250		-* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
251		-* ALARM: Blinking /Fault state.
	231	+|**Item**|**Name**|**Function**
	232	+|Indicator|Status|(((
	233	+* RUN： ON/Running；OFF/Stop.
	234	+* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
	235	+* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
	236	+* ALARM：Blinking /Fault state.
252	252	)))
253		-|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
254		-PRG (Programming)
255		-)))|(% style="width:865px" %)Enter or exit the first menu.
256		-|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
257		-|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
258		-|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
259		-|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
260		-|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
	238	+|(% rowspan="6" %)keys|(((
	239	+PRG
	240	+
	241	+(Programming)
	242	+)))|Enter or exit the first menu.
	243	+|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
	244	+|△（Increment）|Increase date or function code.
	245	+|▽（Decrement）|Decrease data or function code.
	246	+|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	247	+|RUN/STOP|(((
261	261	Control drive start and stop in keypad control mode.
262	262
263	263	Perform the reset operation when it is in the fault state.
264	264	)))
265		-|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
	252	+|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
266	266
267	267	Table 3-2-1 Description of Indicators and key
268	268
269		-= 6 Parameter function =
270	270
271		-* “○”: the parameter can be modified in both standby and operating state；
272		-* “●”: the parameter can’t be modified in operating state；
273		-* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
	257	+= Chapter 4 Parameter function =
274	274
275		-(% class="box infomessage" %)
276		-(((
277		-**Note: **the communication address is hexadecimal.
278		-)))
	259	+“○”: the parameter can be modified in both standby and operating state；
279	279
280		-== Functional parameter ==
	261	+“●”: the parameter can’t be modified in operating state；
281	281
282		-|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 190px;" %)Default|=(% style="width: 80px;" %)Property|=(% style="width: 87px;" %)Address
283		-|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0000
284		-|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
285		-* 0：Operation panel control（LED off）
286		-* 1：Terminal control（LED on）
287		-* 2：Communication LED (LED blinking）
288		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0001
289		-|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
290		-* 0：Digital setting (non-retentive at power failure)
291		-* 1：Digital setting (retentive at power failure)
292		-* 2：Keypad Knob
293		-* 3：AI
294		-* 4：Multi-stage speed
295		-* 5：Simple PLC
296		-* 6：Communication
297		-)))|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0002
298		-|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0003
299		-|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
300		-* 0：Forward
301		-* 1：Reverse
302		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0004
303		-|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)●|(% style="width:87px" %)0005
304		-|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0006
305		-|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:190px" %)0.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0007
306		-|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
307		-* 0：Running at frequency lower limit
308		-* 1：Stop
309		-* 2：Standby
310		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0008
311		-|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:190px" %)6.0kHz|(% style="width:80px" %)●|(% style="width:87px" %)0009
312		-|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000A
313		-|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000B
314		-|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
315		-* 0：Decelerate to stop
316		-* 1：Free stop
317		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000C
318		-|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
319		-* 0：No retentive
320		-* 1：retentive
321		-)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)000D
322		-|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
323		-* 0：Run when motor is running
324		-* 1：Keep run when power on
325		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000E
326		-|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
327		-* 0: 0-10V
328		-* 1: 4-20mA
329		-* 2: 0-20mA
330		-* 3: 0-5V
331		-* 4: 0.5-4.5V
332		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000F
333		-|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
334		-* 0: No Operation
335		-* 1: Restore to factory default setting (not including F2 parameters)
336		-* 2: Clear error records
337		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0100
338		-|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
339		-* 0: Invalid
340		-* 1: Valid
341		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0101
342		-|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0102
343		-|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0200
344		-|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0201
345		-|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0202
346		-|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0203
347		-|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
348		-* 0: Single Phase
349		-* 1: Three Phase
350		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0205
351		-|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:190px" %)80|(% style="width:80px" %)○|(% style="width:87px" %)0206
352		-|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:190px" %)130|(% style="width:80px" %)○|(% style="width:87px" %)0207
353		-|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:190px" %)4.0%|(% style="width:80px" %)○|(% style="width:87px" %)0400
354		-|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.00Hz|(% style="width:80px" %)●|(% style="width:87px" %)0401
355		-|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)0.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0402
356		-|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0403
357		-|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0404
358		-|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0405
359		-|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
360		-* 0: Invalid;
361		-* 1: Valid
362		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0406
363		-|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
364		-* 0: Valid;
365		-* 1: Invalid
366		-)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0407
367		-|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
368		-* 0: No function
369		-* 1: Forward running (FWD)
370		-* 2: Reverse running (REV)
371		-* 3: Three-wire operation control
372		-* 4: Forward point movement (FJOG)
373		-* 5: Reverse point movement (RJOG)
374		-* 6: Error Reset
375		-* 7: Terminal UP
376		-* 8: Terminal Down
377		-* 9: UP/DOWN Setting Clear
378		-* 10: External error input(Normally Open)
379		-* 11: PLC Status reset
380		-* 12: Multi stage speed terminal 1
381		-* 13: Multi stage speed terminal 2
382		-* 14: Reserved
383		-)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0500
384		-|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0501
385		-|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:190px" %)6|(% style="width:80px" %)●|(% style="width:87px" %)0502
386		-|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0503
387		-|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:190px" %)0.010s|(% style="width:80px" %)○|(% style="width:87px" %)0504
388		-|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
389		-* 0: Two-line mode 1
390		-* 1: Two-line mode 2
391		-* 2: Three-line mode 1
392		-* 3: Three-line mode 2
393		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0505
394		-|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:190px" %)0.50Hz|(% style="width:80px" %)○|(% style="width:87px" %)0506
395		-|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:190px" %)0.00V|(% style="width:80px" %)○|(% style="width:87px" %)0507
396		-|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)0508
397		-|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:190px" %)10.00V|(% style="width:80px" %)○|(% style="width:87px" %)0509
398		-|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)100.0%|(% style="width:80px" %)○|(% style="width:87px" %)050A
399		-|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:190px" %)0.10s|(% style="width:80px" %)○|(% style="width:87px" %)050B
400		-|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050C
401		-|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050D
402		-|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050E
403		-|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050F
404		-|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
405		-* 0: No function
406		-* 1: Forward running (FWD)
407		-* 2: Reverse running (REV)
408		-* 3: Three-wire operation control
409		-* 4: Forward point movement (FJOG)
410		-* 5: Reverse point movement (RJOG)
411		-* 6: Error Reset
412		-* 7: Terminal UP
413		-* 8: Terminal Down
414		-* 9: UP/DOWN Setting Clear
415		-* 10: External error input(Normally Open)
416		-* 11: PLC Status reset
417		-* 12: Multi stage speed terminal 1
418		-* 13: Multi stage speed terminal 2
419		-* 14: Reserved
420		-)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0510
421		-|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
422		-* 0: Low Level Valid
423		-* 1: High Level Valid
424		-)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0511
425		-|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
426		-* 0: No Output
427		-* 1: VFD Running
428		-* 2: Error Output(Output is valid only after VFD stops)
429		-* 3: Ready for Running
430		-* 4: Communication Setting
431		-* 5: User Defined Output
432		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0600
433		-|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0601
434		-|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0602
435		-|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
	263	+“◎”:the parameter is the actual detected and recorded value which can’t be modified；
	264	+
	265	+Note: the communication address is hexadecimal.
	266	+
	267	+
	268	+== 4.1 Functional parameter ==
	269	+
	270	+|Parameter|Name|Setting Range|Default|Property|Address
	271	+|F0.00|Reserved|Reserved|0|●|0000
	272	+|F0.01|Command source selection|0：Operation panel control（LED off）
	273	+1：Terminal control（LED on）
	274	+ 2：Communication LED (LED blinking）|0|●|0001
	275	+|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
	276	+ 1：Digital setting (retentive at power failure)
	277	+ 2：Keypad Knob
	278	+ 3：AI
	279	+ 4：Multi-stage speed
	280	+ 5：Simple PLC
	281	+ 6：Communication|2|●|0002
	282	+|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
	283	+|F0.04|Running direction selection|0：Forward
	284	+ 1：Reverse|0|○|0004
	285	+|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
	286	+|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
	287	+|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
	288	+|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
	289	+1：Stop
	290	+2：Standby|0|○|0008
	291	+|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
	292	+|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
	293	+|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
	294	+|F0.12|Stop Mode|0：Decelerate to stop
	295	+ 1：Free stop|0|○|000C
	296	+|F0.13|Retentive of digital setting frequency|0：No retentive
	297	+1：retentive|1|●|000D
	298	+|F0.14|Fan operating mode|0：Run when motor is running
	299	+ 1：Keep run when power on|0|○|000E
	300	+|F0.15|AI1 Input Option|(((
	301	+0：0-10V
	302	+
	303	+1：4-20mA
	304	+
	305	+2: 0-20mA
	306	+
	307	+3：0-5V
	308	+
	309	+4：0.5-4.5V
	310	+)))|0|○|000F
	311	+|F1.00|Default Setting Restoring|0：No Operation
	312	+ 1：Restore to factory default setting (not including F2 parameters)
	313	+ 2：Clear error records|0|●|0100
	314	+|F1.01|Parameters Lockup|0：Invalid
	315	+ 1：Valid|0|○|0101
	316	+|F1.02|User Password|0～65000|0|○|0102
	317	+|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
	318	+|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
	319	+|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
	320	+|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
	321	+|F2.05|Type of Motor|(((
	322	+0：Single Phase
	323	+
	324	+1：Three Phase
	325	+)))|0|●|0205
	326	+|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
	327	+|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
	328	+|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
	329	+|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
	330	+|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
	331	+|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
	332	+|F4.04|The current of DC braking at stop|0～100%|0|○|0404
	333	+|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
	334	+|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
	335	+|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
	336	+|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
	337	+0: No function
	338	+
	339	+1: Forward running (FWD)
	340	+
	341	+2: Reverse running (REV)
	342	+
	343	+3: Three-wire operation control
	344	+
	345	+4: Forward point movement (FJOG)
	346	+
	347	+5: Reverse point movement (RJOG)
	348	+6:Error Reset
	349	+ 7:Terminal UP
	350	+ 8:Terminal Down
	351	+ 9:UP/DOWN Setting Clear
	352	+ 10:External error input(Normally Open)
	353	+ 11：PLC Status reset
	354	+ 12:Multi stage speed terminal 1
	355	+ 13: Multi stage speed terminal 2
	356	+ 14:Reserved
	357	+)))|1|●|0500
	358	+|F5.01|DI2 terminal function selection|2|●|0501
	359	+|F5.02|DI3 terminal function selection|6|●|0502
	360	+|F5.03|DI4 terminal function selection|0|●|0503
	361	+|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
	362	+|F5.05|Terminal Command Option|0: Two-line mode 1
	363	+1: Two-line mode 2
	364	+ 2: Three-line mode 1
	365	+3: Three-line mode 2|0|●|0505
	366	+|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
	367	+|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
	368	+|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
	369	+|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
	370	+|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
	371	+|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
	372	+|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
	373	+|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
	374	+|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
	375	+|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
	376	+|F5.16|AI Input Digital Functional Option|(((
	377	+0: No function
	378	+
	379	+1: Forward running (FWD)
	380	+
	381	+2: Reverse running (REV)
	382	+
	383	+3: Three-wire operation control
	384	+
	385	+4: Forward point movement (FJOG)
	386	+
	387	+5: Reverse point movement (RJOG)
	388	+6:Error Reset
	389	+ 7:Terminal UP
	390	+ 8:Terminal Down
	391	+ 9:UP/DOWN Setting Clear
	392	+ 10:External error input(Normally Open)
	393	+ 11：PLC Status reset
	394	+ 12:Multi stage speed terminal 1
	395	+ 13: Multi stage speed terminal 2
	396	+ 14:Reserved
	397	+)))|0|●|0510
	398	+|F5.17|AI Input Valid Level Option|(((
	399	+0：Low Level Valid
	400	+
	401	+1：High Level Valid
	402	+)))|1|○|0511
	403	+|F6.00|Relay Output Option|0：No Output
	404	+ 1：VFD Running
	405	+ 2：Error Output(Output is valid only after VFD stops)
	406	+ 3：Ready for Running
	407	+ 4：Communication Setting
	408	+ 5: User Defined Output|0|○|0600
	409	+|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
	410	+|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
	411	+|F6.03|(((
436	436	User defined output
437	437
438	438	Variability option（EX）
439		-)))|(% style="width:428px" %)(((
440		-* 0: Running Frequency
441		-* 1: Set Frequency
442		-* 2: Bus Voltage
443		-* 3: Output Voltage
444		-* 4: Output Current
445		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0603
446		-|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
447		-* 0: Equal (EX==X1)
448		-* 1: Equal or greater than
449		-* 2: Equal or less than
450		-* 3: Interval comparison (X1≤EX≤X2)
451		-* 4: Units digit test (EX&X1=X2)
452		-
	415	+)))|0：Running Frequency
	416	+ 1：Set Frequency
	417	+ 2：Bus Voltage
	418	+ 3：Output Voltage
	419	+ 4：Output Current|0|○|0603
	420	+|F6.04|User defined comparison method|Units digit：comparison test method
	421	+0: Equal (EX==X1)
	422	+1: Equal or greater than
	423	+2: Equal or less than
	424	+3 Interval comparison (X1≤EX≤X2)
	425	+4:Units digit test (EX&X1=X2)
453	453	Tens digit: output method
454		-
455		-* 0: False value output
456		-* 1: Real value output
457		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0604
458		-|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0605
459		-|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
	427	+ 0: False value output
	428	+1: Real value output|0|○|0604
	429	+|F6.05|User defined output dead zone|0～65535|0|○|0605
	430	+|F6.06|(((
460	460	User-defined output
461	461
462	462	comparison value 1
463		-)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0606
464		-|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
	434	+)))|0～65535|0|○|0606
	435	+|F6.07|(((
465	465	User-defined output
466	466
467	467	comparison value 2
468		-)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0607
469		-|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
470		-* 0: Running Frequency（0～F0.05）
471		-* 1: Set Frequency（0～F0.05）
472		-* 2: Output Current（0～Double Rated Current of VFD）
473		-* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
474		-* 4: AI（0～10V）
475		-* 5: Bus Voltage（0～500.0/1000.0V）
476		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0608
477		-|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0609
478		-|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060A
479		-|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060B
480		-|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060C
481		-|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060D
482		-|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0700
483		-|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
484		-* 0: Valid only at keypad control mode
485		-* 1: Valid at all control modes
486		-)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0701
487		-|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
488		-* Bit0: Running Frequency(Hz)
489		-* Bit1: Set Frequency(Hz)
490		-* Bit2: Bus Voltage(V)
491		-* Bit3: Output Voltage(V)
492		-* Bit4: Output Current(A)
493		-* Bit5: DI Input Status
494		-* Bit6: DO Output Status
495		-* Bit7: Keypad Knob Voltage(V)
496		-* Bit8: AIVoltage(V)
497		-* Bit9: Load Speed
498		-* Bit10: PID Set Value
499		-* Bit11: PID Feedback Value
500		-* Bit12: PLC Stage
501		-* Bit13: Feedback Frequency（Unit：0.1Hz)
502		-* Bit14: Communication Set Value
503		-* Bit15: Main Frequency Source X
504		-)))|(% style="width:190px" %)0x1F|(% style="width:80px" %)○|(% style="width:87px" %)0702
505		-|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:190px" %)0x06|(% style="width:80px" %)○|(% style="width:87px" %)0703
506		-|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:190px" %)3.000|(% style="width:80px" %)○|(% style="width:87px" %)0704
507		-|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:190px" %)-|(% style="width:80px" %)◎|(% style="width:87px" %)0705
508		-|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)2.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0800
509		-|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0801
510		-|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0802
511		-|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0803
512		-|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
513		-* 0: valid
514		-* 1: invalid
515		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0804
516		-|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0805
517		-|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
518		-* 0：Invalid
519		-* 1：Valid
520		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0806
521		-|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
522		-* 0: Invalid
523		-* 1: Valid
524		-)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0807
525		-|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C00
526		-|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
527		-* 0: 4800bPS
528		-* 1: 9600bPS
529		-* 2: 19200bPS
530		-)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C01
531		-|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
532		-* 0: No check, data format (8.N.1)
533		-* 1: Odd Parity check, data format (8.O.1)
534		-* 2: Even parity check, data format (8.E.1)
535		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0C02
536		-|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:190px" %)2|(% style="width:80px" %)○|(% style="width:87px" %)0C03
537		-|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0C04
538		-|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D00
539		-|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D01
540		-|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D02
541		-|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D03
542		-|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
543		-* 0: Stop after the AC Drive runs one cycle
544		-* 1: Keep final values after the AC Drive runs one cycle
545		-* 2: Repeat after the AC Drive runs one cycle
546		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D04
547		-|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
548		-Tens Digit：(((
549		-* 0: Invalid
550		-* 1: Valid
551		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D05
552		-|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D06
553		-|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D07
554		-|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D08
555		-|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D09
556		-|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0A
557		-|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0B
558		-|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0C
559		-|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0D
560		-|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
561		-* 0: s（second）
562		-* 1: h（hour）
563		-* 2: min（minute）
564		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0E
565		-|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
566		-* 0: Set by FD.00
567		-* 1: AI
568		-)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0F
	439	+)))|0～65535|0|○|0607
	440	+|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
	441	+ 1：Set Frequency（0～F0.05）
	442	+ 2：Output Current（0～Double Rated Current of VFD）
	443	+ 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
	444	+ 4：AI（0～10V）
	445	+ 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
	446	+|F6.09|AO2 Output Option|0|○|0609
	447	+|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
	448	+|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
	449	+|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
	450	+|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
	451	+|F7.00|Reserved|Reserved|0|○|0700
	452	+|F7.01|STOP Button Function|0：Valid only at keypad control mode
	453	+ 1：Valid at all control modes|1|○|0701
	454	+|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
	455	+Bit0：Running Frequency(Hz)
	456	+ Bit1：Set Frequency(Hz)
	457	+ Bit2：Bus Voltage(V)
	458	+ Bit3：Output Voltage(V)
	459	+ Bit4：Output Current(A)
	460	+ Bit5：DI Input Status
	461	+ Bit6：DO Output Status
	462	+ Bit7：Keypad Knob Voltage(V)
569	569
570		-== Monitoring Parameters ==
	464	+Bit8：AIVoltage(V)
	465	+ Bit9：Load Speed
	466	+ Bit10：PID Set Value
	467	+ Bit11：PID Feedback Value
	468	+ Bit12：PLC Stage
	469	+ Bit13：Feedback Frequency（Unit：0.1Hz)
571	571
572		-|=(% scope="row" %)Parameter|=Name|=(% style="width: 257px;" %)Minimum Unit|=(% style="width: 160px;" %)Priority|=(% style="width: 113px;" %)Address
573		-|=D0.00|Running Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D000
574		-|=D0.01|Set Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D001
575		-|=D0.02|Bus Voltage(V)|(% style="width:257px" %)0.1V|(% style="width:160px" %)◎|(% style="width:113px" %)D002
576		-|=D0.03|Output Voltage(V)|(% style="width:257px" %)1V|(% style="width:160px" %)◎|(% style="width:113px" %)D003
577		-|=D0.04|Output Current(A)|(% style="width:257px" %)0.01A|(% style="width:160px" %)◎|(% style="width:113px" %)D004
578		-|=D0.05|IGBT Module Temperature（℃）|(% style="width:257px" %)0.1℃|(% style="width:160px" %)◎|(% style="width:113px" %)D005
579		-|=D0.06|DI Input Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D006
580		-|=D0.07|DO Output Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D007
581		-|=D0.08|Keypad Knob Voltage|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D008
582		-|=D0.09|AI Voltage(V)|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D009
583		-|=D0.10|Reserved|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D010
584		-|=D0.13|PLC Stage|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D013
585		-|=D0.14|Feedback Speed(Unit0.1Hz)|(% style="width:257px" %)0.1Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D014
	471	+Bit14：Communication Set Value
	472	+ Bit15：Main Frequency Source X
	473	+)))|0x1F|○|0702
	474	+|F7.03|LED display parameters at stop status|0x06|○|0703
	475	+|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
	476	+|F7.05|Software Version|-|-|◎|0705
	477	+|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
	478	+|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
	479	+|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
	480	+|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
	481	+|F8.04|Reverse control|(((
	482	+0：valid
586	586
587		-== Error Records ==
	484	+1：invalid
	485	+)))|0|○|0804
	486	+|F8.05|Reserved|0|0|●|0805
	487	+|F8.06|Startup Protection Option|0：Invalid
	488	+ 1：Valid|0|○|0806
	489	+|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
	490	+|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
	491	+|FC.01|Baud Rate|0：4800bPS
	492	+ 1：9600bPS
	493	+ 2：19200bPS|1|○|0C01
	494	+|FC.02|Data format|0：No check, data format (8.N.1)
	495	+ 1：Odd Parity check, data format (8.O.1)
	496	+ 2：Even parity check, data format (8.E.1)|0|○|0C02
	497	+|FC.03|Respond Delay|0ms～20ms|2|○|0C03
	498	+|FC.04|Reserved|0|0|●|0C04
	499	+|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
	500	+|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
	501	+|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
	502	+|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
	503	+|FD.04|Simple PLC running mode|(((
	504	+0:Stop after the AC Drive runs one cycle
588	588
589		-|=(% scope="row" %)Parameter|=Name|=(% style="width: 429px;" %)Range and Description|=(% style="width: 124px;" %)Priority|=(% style="width: 129px;" %)Address
590		-|=E0.00|Latest error type|(% style="width:429px" %)(((
591		-* No Error: 0
592		-* Acceleration Over Current: Err02
593		-* Deceleration Over Current: Err03
594		-* Over Current at constant speed: Err04
595		-* Acceleration Over Voltage: Err05
596		-* Deceleration Over Voltage: Err06
597		-* Over Voltage at constant speed: Err07
598		-* Low Voltage error: Err09
599		-* VFD overload: Err10
600		-* Motor overload: Err11
601		-* IGBT overheat: Err14
602		-* External Error: Err15
603		-* Current Detection Error: Err18
604		-* Parameter writing/reading error: Err21
605		-* EEPROM writing/reading error: Err22
606		-)))|(% style="width:124px" %)●|(% style="width:129px" %)　E000
607		-|=E0.01|Running Frequency at latest error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E001
608		-|=E0.02|Output Current at latest error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E002
609		-|=E0.03|Bus Voltage at latest error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E003
610		-|=E0.04|Input terminals status at latest error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E004
611		-|=E0.05|IGBT temperature at latest error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E005
612		-|=E1.00|Former error type|(% style="width:429px" %)As E0.00|(% style="width:124px" %)●|(% style="width:129px" %)　E100
613		-|=E1.01|Running Frequency at former error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E101
614		-|=E1.02|Output Current at former error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E102
615		-|=E1.03|Bus Voltage at former error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E103
616		-|=E1.04|Input terminals status at former error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E104
617		-|=E1.05|IGBT temperature at former error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E105
	506	+1:Keep final values after the AC Drive runs one cycle
618	618
619		-= 7 Communication Protocol =
	508	+2:Repeat after the AC Drive runs one cycle
	509	+)))|0|○|0D04
	510	+|FD.05|Simple PLC retentive option|Units Digit：Reserved
	511	+ Tens Digit：
	512	+ 0：Invalid
	513	+ 1：Valid|0|○|0D05
	514	+|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
	515	+|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
	516	+|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
	517	+|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
	518	+|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
	519	+|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
	520	+|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
	521	+|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
	522	+|FD.14|Time unit of simple PLC running|0：s（second）
	523	+ 1：h（hour）
	524	+ 2：min（minute）|0|○|0D0E
	525	+|FD.15|The source of multistage speed 0|(((
	526	+0：Set by FD.00
620	620
	528	+1：AI
	529	+)))|0|○|0D0F
	530	+
	531	+== 4.2 Monitoring Parameters ==
	532	+
	533	+|Parameter|Name|Minimum Unit|Priority|Address
	534	+|D0.00|Running Frequency(Hz)|0.01Hz|◎|D000
	535	+|D0.01|Set Frequency(Hz)|0.01Hz|◎|D001
	536	+|D0.02|Bus Voltage(V)|0.1V|◎|D002
	537	+|D0.03|Output Voltage(V)|1V|◎|D003
	538	+|D0.04|Output Current(A)|0.01A|◎|D004
	539	+|D0.05|IGBT Module Temperature（℃）|0.1℃|◎|D005
	540	+|D0.06|DI Input Status|1|◎|D006
	541	+|D0.07|DO Output Status|1|◎|D007
	542	+|D0.08|Keypad Knob Voltage|0.01V|◎|D008
	543	+|D0.09|AI Voltage(V)|0.01V|◎|D009
	544	+|D0.10|Reserved|1|◎|D010
	545	+|D0.13|PLC Stage|1|◎|D013
	546	+|D0.14|Feedback Speed(Unit0.1Hz)|0.1Hz|◎|D014
	547	+
	548	+== 4.3 Error Records ==
	549	+
	550	+|Parameter|Name|Range and Description|Priority|Address
	551	+|E0.00|Latest error type|No Error:0
	552	+ Acceleration Over Current：Err02
	553	+ Deceleration Over Current：Err03
	554	+ Over Current at constant speed：Err04
	555	+ Acceleration Over Voltage：Err05
	556	+ Deceleration Over Voltage：Err06
	557	+ Over Voltage at constant speed：Err07
	558	+ Low Voltage error：Err09
	559	+ VFD overload：Err10
	560	+ Motor overload：Err11
	561	+ IGBT overheat：Err14
	562	+ External Error：Err15
	563	+ Current Detection Error：Err18
	564	+ Parameter writing/reading error：Err21
	565	+ EEPROM writing/reading error:Err22|●|　E000
	566	+|E0.01|Running Frequency at latest error|0.0Hz-F0.05|●|　E001
	567	+|E0.02|Output Current at latest error|0.00-655.35|●|　E002
	568	+|E0.03|Bus Voltage at latest error|0.0-810|●|　E003
	569	+|E0.04|Input terminals status at latest error|0-63|●|　E004
	570	+|E0.05|IGBT temperature at latest error|0-65535|●|　E005
	571	+|E1.00|Former error type|As E0.00|●|　E100
	572	+|E1.01|Running Frequency at former error|0.0Hz-F0.05|●|　E101
	573	+|E1.02|Output Current at former error|0.00-655.35|●|　E102
	574	+|E1.03|Bus Voltage at former error|0.0-810|●|　E103
	575	+|E1.04|Input terminals status at former error|0-63|●|　E104
	576	+|E1.05|IGBT temperature at former error|0-65535|●|　E105
	577	+
	578	+= Chapter5 Communication Protocol =
	579	+
621	621	VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
622	622
623		-== Communication Control Address ==
	582	+== 5.1 Communication Control Address ==
624	624
625		-|=(% scope="row" style="width: 284px;" %)Function|=(% style="width: 134px;" %)Address|=(% style="width: 360px;" %)Description|=(% style="width: 276px;" %)Remarks|=Characteristic
626		-|=(% style="width: 284px;" %)Communication Set Value|(% style="width:134px" %)1000H|(% style="width:360px" %)-10000～10000 (with ± sign)|(% style="width:276px" %)F0.05* (±100.00%)|R/W
627		-|=(% rowspan="7" style="width: 284px;" %)Control Command|(% rowspan="7" style="width:134px" %)2000H|(% style="width:360px" %)0001: Forward running|(% style="width:276px" %)-|W
628		-|(% scope="row" style="width:360px" %)0002: Reverse running|(% style="width:276px" %)-|W
629		-|(% scope="row" style="width:360px" %)0003: JOG forward|(% style="width:276px" %)-|W
630		-|(% scope="row" style="width:360px" %)0004: JOG reverse|(% style="width:276px" %)-|W
631		-|(% scope="row" style="width:360px" %)0005: Free stop|(% style="width:276px" %)-|W
632		-|(% scope="row" style="width:360px" %)0006: Deceleration stop|(% style="width:276px" %)-|W
633		-|(% scope="row" style="width:360px" %)0007: Fault reset|(% style="width:276px" %)-|W
634		-|=(% rowspan="3" style="width: 284px;" %)Running Status|(% rowspan="3" style="width:134px" %)3000H|(% style="width:360px" %)0001: FWD running|(% style="width:276px" %)-|R
635		-|(% scope="row" style="width:360px" %)0002: REV running|(% style="width:276px" %)-|R
636		-|(% scope="row" style="width:360px" %)0003: Stopped|(% style="width:276px" %)-|R
637		-|=(% rowspan="11" style="width: 284px;" %)Monitoring Data|(% style="width:134px" %)1001H|(% style="width:360px" %)Running Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
638		-|(% scope="row" style="width:134px" %)1002H|(% style="width:360px" %)Set Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
639		-|(% scope="row" style="width:134px" %)1003H|(% style="width:360px" %)Bus Voltage（V）|(% style="width:276px" %)1 decimal place|R
640		-|(% scope="row" style="width:134px" %)1004H|(% style="width:360px" %)Output Voltage（V）|(% style="width:276px" %)1 decimal place|R
641		-|(% scope="row" style="width:134px" %)1005H|(% style="width:360px" %)Output Current（A）|(% style="width:276px" %)2 decimal places|R
642		-|(% scope="row" style="width:134px" %)1006H|(% style="width:360px" %)IGBT Temperature|(% style="width:276px" %)1 decimal place|R
643		-|(% scope="row" style="width:134px" %)1007H|(% style="width:360px" %)Digital input status|(% style="width:276px" %)DI1-DI4 Added by binary bit weight|R
644		-|(% scope="row" style="width:134px" %)1009H|(% style="width:360px" %)Keypad Knob Voltage（V）|(% style="width:276px" %)1 decimal place|R
645		-|(% scope="row" style="width:134px" %)101AH|(% style="width:360px" %)AI Volatage （V）|(% style="width:276px" %)1 decimal place|R
646		-|(% scope="row" style="width:134px" %)100BH|(% style="width:360px" %)Load Speed Display|(% style="width:276px" %)1 decimal place|R
647		-|(% scope="row" style="width:134px" %)100EH|(% style="width:360px" %)PLC Stage|(% style="width:276px" %)Simple PLC running stage|R
648		-|=(% rowspan="14" style="width: 284px;" %)Failure status|(% rowspan="14" style="width:134px" %)8000H|(% style="width:360px" %)0000: No error|(% style="width:276px" %)-|R
649		-|(% scope="row" style="width:360px" %)0002: Acceleration Over Current|(% style="width:276px" %)-|R
650		-|(% scope="row" style="width:360px" %)0003: Acceleration Over Current|(% style="width:276px" %)-|R
651		-|(% scope="row" style="width:360px" %)0004: Over Current at Constant Speed|(% style="width:276px" %)-|R
652		-|(% scope="row" style="width:360px" %)0005: Acceleration Over Voltage|(% style="width:276px" %)-|R
653		-|(% scope="row" style="width:360px" %)0006: Deceleration Over Voltage|(% style="width:276px" %)-|R
654		-|(% scope="row" style="width:360px" %)0007: Over Voltage at Constant Speed|(% style="width:276px" %)-|R
655		-|(% scope="row" style="width:360px" %)0009: Low Voltage Error|(% style="width:276px" %)-|R
656		-|(% scope="row" style="width:360px" %)000A: VFD Overload|(% style="width:276px" %)-|R
657		-|(% scope="row" style="width:360px" %)000B: Motor Overload|(% style="width:276px" %)-|R
658		-|(% scope="row" style="width:360px" %)000E: IGBT Overheat|(% style="width:276px" %)-|R
659		-|(% scope="row" style="width:360px" %)000F: External Error|(% style="width:276px" %)-|R
660		-|(% scope="row" style="width:360px" %)0012: Current Detection Error|(% style="width:276px" %)-|R
661		-|(% scope="row" style="width:360px" %)0015: Parameters Writing/Reading Error|(% style="width:276px" %)-|R
662		-|=(% rowspan="9" style="width: 284px;" %)Communication Error Feedback|(% rowspan="9" style="width:134px" %)8001H|(% style="width:360px" %)0000: No Error|(% style="width:276px" %)-|R
663		-|(% scope="row" style="width:360px" %)0001: Password Error|(% style="width:276px" %)-|R
664		-|(% scope="row" style="width:360px" %)0002: Command Code Error|(% style="width:276px" %)-|R
665		-|(% scope="row" style="width:360px" %)0003: CRCError|(% style="width:276px" %)-|R
666		-|(% scope="row" style="width:360px" %)0004: Invalid Address|(% style="width:276px" %)-|R
667		-|(% scope="row" style="width:360px" %)0005: Invalid Parameter|(% style="width:276px" %)-|R
668		-|(% scope="row" style="width:360px" %)0006: Parameters Adjustment Failed|(% style="width:276px" %)-|R
669		-|(% scope="row" style="width:360px" %)0007: System Locked|(% style="width:276px" %)-|R
670		-|(% scope="row" style="width:360px" %)0008: Parameters Being Saved|(% style="width:276px" %)-|R
	584	+|Function|Address|Description|Remarks|Characteristic
	585	+|Communication Set Value|1000H|-10000～10000（with ± sign）|F0.05*（±100.00%）|R/W
	586	+|(% rowspan="7" %)Control Command|(% rowspan="7" %)2000H|0001: Forward running|-|W
	587	+|0002: Reverse running|-|W
	588	+|0003: JOG forward|-|W
	589	+|0004: JOG reverse|-|W
	590	+|0005: Free stop|-|W
	591	+|0006: Deceleration stop|-|W
	592	+|0007: Fault reset|-|W
	593	+|(% rowspan="3" %)Running Status|(% rowspan="3" %)3000H|0001：FWD running|-|R
	594	+|0002：REV running|-|R
	595	+|0003：Stopped|-|R
	596	+|(% rowspan="11" %)Monitoring Data|1001H|Running Frequency（Hz）|2 decimal places|R
	597	+|1002H|Set Frequency（Hz）|2 decimal places|R
	598	+|1003H|Bus Voltage（V）|1 decimal place|R
	599	+|1004H|Output Voltage（V）|1 decimal place|R
	600	+|1005H|Output Current（A）|2 decimal places|R
	601	+|1006H|IGBT Temperature|1 decimal place|R
	602	+|1007H|Digital input status|DI1-DI4 Added by binary bit weight|R
	603	+|1009H|Keypad Knob Voltage（V）|1 decimal place|R
	604	+|101AH|AI Volatage （V）|1 decimal place|R
	605	+|100BH|Load Speed Display|1 decimal place|R
	606	+|100EH|PLC Stage|Simple PLC running stage|R
	607	+|(% rowspan="14" %)Failure status|(% rowspan="14" %)8000H|0000：No error|-|R
	608	+|0002：Acceleration Over Current|-|R
	609	+|0003：Acceleration Over Current|-|R
	610	+|0004：Over Current at Constant Speed|-|R
	611	+|0005：Acceleration Over Voltage|-|R
	612	+|0006：Deceleration Over Voltage|-|R
	613	+|0007：Over Voltage at Constant Speed|-|R
	614	+|0009：Low Voltage Error|-|R
	615	+|000A：VFD Overload|-|R
	616	+|000B：Motor Overload|-|R
	617	+|000E：IGBT Overheat|-|R
	618	+|000F：External Error|-|R
	619	+|0012：Current Detection Error|-|R
	620	+|0015：Parameters Writing/Reading Error|-|R
	621	+|(% rowspan="9" %)Communication Error Feedback|(% rowspan="9" %)8001H|0000：No Error|-|R
	622	+|0001：Password Error|-|R
	623	+|0002：Command Code Error|-|R
	624	+|0003：CRCError|-|R
	625	+|0004：Invalid Address|-|R
	626	+|0005：Invalid Parameter|-|R
	627	+|0006：Parameters Adjustment Failed|-|R
	628	+|0007：System Locked|-|R
	629	+|0008：Parameters Being Saved|-|R
671	671
672	672	Sheet 5-1-1 Control Command Addresses
673	673
674		-== EEPROM Addresses Introduction ==
	633	+== 5.2 EEPROM Addresses Introduction ==
675	675
676	676	The addresses listed in the sheet above is the way of writing RAM. The RAM stores the data after power-off and does not save it. In the communication mode, for the write command "06H", if the parameter needs to be stored after power-off, the method of writing EEPROM should be used. The original "0" of the most significant bit of the RAM address is changed to "F", which is converted into the corresponding EEPROM address, for example: "0XXX" is changed to "FXXX"
677	677
...	...	@@ -683,12 +683,12 @@
683	683
684	684	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
685	685
686		-= 8 Troubleshooting & countermeasures =
	645	+= Chapter 6 Troubleshooting & countermeasures =
687	687
688		-== Faults and solutions ==
	647	+== 6.1 Faults and solutions ==
689	689
690		-|=(% scope="row" %)Fault code|=Fault type|=Reason|=Solution
691		-|=Err02|Overcurrent during acceleration|(((
	649	+|Fault code|Fault type|Reason|Solution
	650	+|Err02|Overcurrent during acceleration|(((
692	692	~1. The output circuit of AC Drive is grounded or short circuited.
693	693
694	694	2. The acceleration time is too short.
...	...	@@ -705,7 +705,7 @@
705	705
706	706	4. Select the AC Drive of higher power.
707	707	)))
708		-|=Err03|Overcurrent during deceleration|(((
	667	+|Err03|Overcurrent during deceleration|(((
709	709	~1. The output circuit of AC Drive is grounded or short circuited.
710	710
711	711	2. The deceleration time is too short.
...	...	@@ -714,7 +714,7 @@
714	714
715	715	2. Increase the deceleration time.
716	716	)))
717		-|=Err04|Overcurrent at constant speed|(((
	676	+|Err04|Overcurrent at constant speed|(((
718	718	~1. The output circuit of AC Drive is grounded or short circuited.
719	719
720	720	2. The AC Drive model is of too small power.
...	...	@@ -723,7 +723,7 @@
723	723
724	724	2. Select the AC Drive of higher power.
725	725	)))
726		-|=Err05|Overvoltage during acceleration|(((
	685	+|Err05|Overvoltage during acceleration|(((
727	727	~1. Input voltage abnormal.
728	728
729	729	2. An external force drives the motor during acceleration.
...	...	@@ -740,7 +740,7 @@
740	740
741	741	4. Installed the braking unit and braking resistor.
742	742	)))
743		-|=Err06|Overvoltage during deceleration|(((
	702	+|Err06|Overvoltage during deceleration|(((
744	744	~1. Input voltage abnormal.
745	745
746	746	2. An external force drives the motor during deceleration.
...	...	@@ -757,7 +757,7 @@
757	757
758	758	4. Installed the braking unit and braking resistor.
759	759	)))
760		-|=Err07|Overvoltage at constant speed|(((
	719	+|Err07|Overvoltage at constant speed|(((
761	761	~1. Input voltage abnormal.
762	762
763	763	2. An external force drives the motor during deceleration.
...	...	@@ -766,7 +766,7 @@
766	766
767	767	2. Cancel the external force.
768	768	)))
769		-|=Err09|Undervoltage|(((
	728	+|Err09|Undervoltage|(((
770	770	~1. Instantaneous power failure occurs on the input supply.
771	771
772	772	2. The input voltage is not within the normal range.
...	...	@@ -779,7 +779,7 @@
779	779
780	780	3. Looking for technical service.
781	781	)))
782		-|=Err10|AC Drive overload|(((
	741	+|Err10|AC Drive overload|(((
783	783	~1. The load is too heavy or lockedrotor occurs on motor.
784	784
785	785	2. The AC Drive model is of too small power.
...	...	@@ -788,7 +788,7 @@
788	788
789	789	2. Select the AC Drive of higher power.
790	790	)))
791		-|=Err11|Motor overload|(((
	750	+|Err11|Motor overload|(((
792	792	The parameter setting of F2.03 does not match the motor
793	793
794	794	2. The AC Drive model is of too small power.
...	...	@@ -797,7 +797,7 @@
797	797
798	798	2. Reduce the load and check the motor.
799	799	)))
800		-|=Err14|Module overheating|(((
	759	+|Err14|Module overheating|(((
801	801	~1. The ambient temperature is too high.
802	802
803	803	2. The air filter is blocked.
...	...	@@ -814,8 +814,8 @@
814	814
815	815	4. Ask for technical service.
816	816	)))
817		-|=Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
818		-|=Err16|Communication fault|(((
	776	+|Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
	777	+|Err16|Communication fault|(((
819	819	~1. The PC is in abnormal state.
820	820
821	821	2. The communication cable is faulty.
...	...	@@ -828,26 +828,27 @@
828	828
829	829	3. Set the communication parameters properly.
830	830	)))
831		-|=Err18|Current detection fault|(((
	790	+|Err18|Current detection fault|(((
832	832	~1. Current detection circuit is abnormal.
833	833
834	834	2. Control circuit is abnormal.
835	835	)))|1. Ask for technical service.
836		-|=Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
837		-|=Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
	795	+|Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
	796	+|Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
838	838
839	839	Table 6-1-1 Faults and solutions
840	840
841		-== Common faults and solutions ==
842	842
843		-|=(% scope="row" style="width: 59px;" %)**SN**|=(% style="width: 232px;" %)**Fault**|=(% style="width: 437px;" %)**Possible causes**|=(% style="width: 475px;" %)**Solutions**
844		-|=(% style="width: 59px;" %)1|(% style="width:232px" %)No display at power-on state|(% style="width:437px" %)(((
	801	+== 6.2 Common faults and solutions ==
	802	+
	803	+|**SN**|**Fault**|**Possible causes**|**Solutions**
	804	+|1|No display at power-on state|(((
845	845	~1. The input power of AC Drive is abnormal.
846	846
847	847	2. The control board has a bad contact with cable that is connected to the keypad.
848	848
849	849	3. The AC Drive is abnormal.
850		-)))|(% style="width:475px" %)(((
	810	+)))|(((
851	851	~1. Check the input power.
852	852
853	853	2. Re-connect the cable.
...	...	@@ -854,7 +854,7 @@
854	854
855	855	3. Ask for technical service.
856	856	)))
857		-|=(% style="width: 59px;" %)2|(% style="width:232px" %)The motor does not rotate after the AC Drive runs.|(% style="width:437px" %)(((
	817	+|2|The motor does not rotate after the AC Drive runs.|(((
858	858	~1. The motor is damaged.
859	859
860	860	2. The motor cables is abnormal.
...	...	@@ -862,7 +862,7 @@
862	862	3. The cable between the drive board and control board is in poor contact.
863	863
864	864	4. The AC Drive is abnormal.
865		-)))|(% style="width:475px" %)(((
	825	+)))|(((
866	866	~1. Replay the motor.
867	867
868	868	2. Ensure the cable between the AC Drive and the motor is normal.
...	...	@@ -871,13 +871,13 @@
871	871
872	872	4. Ask for technical service.
873	873	)))
874		-|=(% style="width: 59px;" %)3|(% style="width:232px" %)DI termianls are disabled.|(% style="width:437px" %)(((
	834	+|3|DI termianls are disabled.|(((
875	875	~1. The parameters are set incorrectly.
876	876
877	877	2. The external signal is incorrect.
878	878
879	879	3. The control board is abnormal.
880		-)))|(% style="width:475px" %)(((
	840	+)))|(((
881	881	~1. Check and reset the parameters in group F5.
882	882
883	883	2. Re-connect the external signal cables.
...	...	@@ -884,13 +884,13 @@
884	884
885	885	3. Ask for technical service.
886	886	)))
887		-|=(% style="width: 59px;" %)4|(% style="width:232px" %)AC Drive interference|(% style="width:437px" %)(((
	847	+|4|AC Drive interference|(((
888	888	~1. Carrier frequency setting is not suitable.
889	889
890	890	2. The grounding method of the AC Drive and the motor is incorrect.
891	891
892	892	3. The wire between the AC Drive and the motor is too long.
893		-)))|(% style="width:475px" %)(((
	853	+)))|(((
894	894	~1. Reduce the carrier frequency
895	895
896	896	2. The AC Drive and the motor are effectively grounded and separated from the ground of the peripheral device.
...	...	@@ -897,22 +897,22 @@
897	897
898	898	3. Install out reactor or reduce wire distance.
899	899	)))
900		-|=(% style="width: 59px;" %)5|(% style="width:232px" %)Motor noise is too loud.|(% style="width:437px" %)(((
	860	+|5|Motor noise is too loud.|(((
901	901	~1. Motor damage or mechanical failure.
902	902
903	903	2. Carrier frequency setting is too small.
904		-)))|(% style="width:475px" %)(((
	864	+)))|(((
905	905	~1. Replace the motor or clear the mechanical fault.
906	906
907	907	2. Increase the carrier frequency appropriately.
908	908	)))
909		-|=(% style="width: 59px;" %)6|(% style="width:232px" %)Switch trip|(% style="width:437px" %)(((
	869	+|6|Switch trip|(((
910	910	~1. Installed a leakage switch or an air switch overload.
911	911
912	912	2. The input power of AC Drive is abnormal.
913	913
914	914	3. The AC Drive is damaged.
915		-)))|(% style="width:475px" %)(((
	875	+)))|(((
916	916	~1. Replay the leakage switch or replay the larfer capacity air switch.
917	917
918	918	2. Eliminate whether the input power is shorted.
...	...	@@ -921,3 +921,10 @@
921	921	)))
922	922
923	923	Table 6-2-1 Common faults and solutions
	884	+
	885	+
	886	+(((
	887	+
	888	+)))
	889	+
	890	+