Changes for page 1 VM Series Manual V1.2

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-1 VM AC Drive Manual
	1	+1 VM Series Manual V1.2

Content

...	...	@@ -1,3 +1,8 @@
	1	+(% class="box infomessage" %)
	2	+(((
	3	+**This is VM series V1.2. S/N on the inverter starts from "X0".**
	4	+)))
	5	+
1	1	= 1 Preface =
2	2
3	3	Thank you for choosing WECON VM Series AC Drive.
...	...	@@ -8,7 +8,6 @@
8	8
9	9	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
10	10
11		-
12	12	= 2 Safety precautions =
13	13
14	14	**■ Warning sign**
...	...	@@ -84,21 +84,21 @@
84	84	|=(% colspan="2" %)**Item**|=**Specifications**
85	85	|(% rowspan="7" %)Control features|Control mode|V/F control
86	86	|Startup torque|0.5Hz/100%
87		-|Speed range|1：50
	91	+|Speed range|1: 50
88	88	|Speed stability accuracy|±1%
89		-|Carrier frequency|1kHz ～ 6kHz；
	93	+|Carrier frequency|1kHz~~6kHz；
90	90	|Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
91		-|Torque boost|0.0% ～ 30.0%
92		-|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
93		-|Input frequency range|50/60Hz；fluctuation range :±5%
	95	+|Torque boost|0.0%~~30.0%
	96	+|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
	97	+|Input frequency range|50/60Hz；fluctuation range: ±5%
94	94	|Output voltage range|0-input voltage; the error is less than 5%
95		-|Output frequency range|0-400Hz
	99	+|Output frequency range|0~~400Hz
96	96	|(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
97	97	|Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
98	98	|DC braking|(((
99		-Braking time: 0.0s ～ 50.0s;
	103	+Braking time: 0.0s~~50.0s;
100	100
101		-Braking action current value: 0.0% ～ 100.0%
	105	+Braking action current value: 0.0%~~100.0%
102	102	)))
103	103	|Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
104	104	|Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
...	...	@@ -106,7 +106,7 @@
106	106	|Parameters locking function|It can lock the parameters to prevent malfunction.
107	107	|(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
108	108	|Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
109		-|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
	113	+|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
110	110	|Humidity|≤95%RH, without condensing
111	111	|Vibration|Less than 5.9m/s2 (0.6g)
112	112	|Storage temperature|-25℃～+60℃
...	...	@@ -115,9 +115,12 @@
115	115
116	116	== Product nameplate ==
117	117
118		-[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
	122	+(% style="text-align:center" %)
	123	+(((
	124	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	125	+[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
	126	+)))
119	119
120		-Figure 1-2-1 Product nameplate
121	121
122	122	== Model description ==
123	123
...	...	@@ -125,10 +125,10 @@
125	125
126	126	①  ② ③  ④
127	127
128		-|**Field**|**No.**|**Identification**|**Description**
	135	+|=**Field**|=**No.**|=**Identification**|=**Description**
129	129	|Product series|①|Product series|VM series
130		-|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
131		-|The input power|③|Power phase identification|S: single ； T: three-phase
	137	+|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
	138	+|The input power|③|Power phase identification|S: single; T: three-phase
132	132	|Rated power|④|Power range|1R5-1.5kW，R is the decimal point
133	133
134	134	Table 1-3-1 VM series model field comment
...	...	@@ -135,21 +135,24 @@
135	135
136	136	== Product model ==
137	137
138		-|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
139		-|kW|kVA|A|A|kW|HP
140		-|VM-2SR75|0.75|1.5|8.2|4|0.75|1
141		-|VM-2S1R5|1.5|3|14.2|7|1.5|2
142		-|VM-2S2R2|2.2|4|23|9.6|2.2|3
143		-|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
144		-|VM-4T004|4|5.9|10.5|9|4/|5.5
145		-|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
146		-|VM-4T7R5|7.5|11|20.5|17|7.5|10
147		-|VM-4T011*|11|17|26|25|11|15
148		-|VM-4T015*|15|21|35|32|15|20
	145	+|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
	146	+|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
	147	+|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
	148	+|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
	149	+|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
	150	+|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
	151	+|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
	152	+|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
	153	+|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
	154	+|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
	155	+|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
149	149
150	150	Table 1-4-1 Product model table
151	151
	159	+(% class="box infomessage" %)
	160	+(((
152	152	*:In development
	162	+)))
153	153
154	154	= 4 Installation =
155	155
...	...	@@ -158,42 +158,49 @@
158	158	(% class="wikigeneratedid" %)
159	159	unit: mm
160	160
161		-[[image:1624240220324-243.png]]
	171	+(% style="text-align:center" %)
	172	+(((
	173	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	174	+[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
	175	+)))
162	162
163		-Figure 2-1-1 Outline dimension diagram
164	164
165		-|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
166		-|H|W|D|H1|W1|d
167		-|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
168		-|VM-2S1R5
169		-|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
170		-|VM-4T2R2
171		-|VM-4T004|196|95|132|179|79|5.5
172		-|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
173		-|VM-4T7R5
174		-|VM-4T011|-|-|-|-|-|-
175		-|VM-4T015|-|-|-|-|-|-
	178	+(% style="width:1271.22px" %)
	179	+|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
	180	+|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
	181	+|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
	182	+|=(% style="width: 267px;" %)VM-2S1R5
	183	+|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
	184	+|=(% style="width: 267px;" %)VM-4T2R2
	185	+|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
	186	+|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
	187	+|=(% style="width: 267px;" %)VM-4T7R5
	188	+|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
	189	+|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
176	176
177	177	Table 2-1-1 outline dimension
178	178
179	179	== Terminal connection ==
180	180
181		-[[image:1624240272484-903.png]]
	195	+(% style="text-align:center" %)
	196	+(((
	197	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	198	+[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
	199	+)))
182	182
183		-Figure 2-2-1 Terminal connection
184	184
185	185	**Main circuit connection**
186	186
187		-|**Terminal mark**|**Name**|**Description**
188		-|R、S、T|Power supply input terminals|Connect to the AC power supply
189		-|U、V、W|AC drive output terminals|Connect the three-phase motor.
190		-|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
	204	+|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
	205	+|=R、S、T|Power supply input terminals|Connect to the AC power supply
	206	+|=U、V、W|AC drive output terminals|Connect the three-phase motor.
	207	+|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
191	191
192	192	Table 2-2-1 Main circuit terminals and function
193	193
194	194	**Control circuit connection**
195	195
196		-|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
	213	+|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
197	197	|(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
198	198	Provide +10V power supply to external unit.
199	199
...	...	@@ -217,356 +217,387 @@
217	217
218	218	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
219	219
220		-[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
	237	+(% style="text-align:center" %)
	238	+(((
	239	+(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
	240	+[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
	241	+)))
221	221
222		-Figure 3-1-1 Keypad diagram
223	223
224	224	== Description of indicators and keys ==
225	225
226		-|**Item**|**Name**|**Function**
227		-|Indicator|Status|(((
228		-* RUN： ON/Running；OFF/Stop.
229		-* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
230		-* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
231		-* ALARM：Blinking /Fault state.
	246	+|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
	247	+|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
	248	+* RUN: ON/Running; OFF/Stop.
	249	+* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
	250	+* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
	251	+* ALARM: Blinking /Fault state.
232	232	)))
233		-|(% rowspan="6" %)keys|(((
234		-PRG
235		-
236		-(Programming)
237		-)))|Enter or exit the first menu.
238		-|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
239		-|△（Increment）|Increase date or function code.
240		-|▽（Decrement）|Decrease data or function code.
241		-|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
242		-|RUN/STOP|(((
	253	+|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
	254	+PRG (Programming)
	255	+)))|(% style="width:865px" %)Enter or exit the first menu.
	256	+|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
	257	+|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
	258	+|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
	259	+|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	260	+|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
243	243	Control drive start and stop in keypad control mode.
244	244
245	245	Perform the reset operation when it is in the fault state.
246	246	)))
247		-|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
	265	+|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
248	248
249	249	Table 3-2-1 Description of Indicators and key
250	250
251	251	= 6 Parameter function =
252	252
253		-“○”: the parameter can be modified in both standby and operating state；
	271	+* “○”: the parameter can be modified in both standby and operating state；
	272	+* “●”: the parameter can’t be modified in operating state；
	273	+* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
254	254
255		-“●”: the parameter can’t be modified in operating state；
	275	+(% class="box infomessage" %)
	276	+(((
	277	+**Note: **the communication address is hexadecimal.
	278	+)))
256	256
257		-“◎”:the parameter is the actual detected and recorded value which can’t be modified；
258		-
259		-Note: the communication address is hexadecimal.
260		-
261	261	== Functional parameter ==
262	262
263		-|Parameter|Name|Setting Range|Default|Property|Address
264		-|F0.00|Reserved|Reserved|0|●|0000
265		-|F0.01|Command source selection|0：Operation panel control（LED off）
266		-1：Terminal control（LED on）
267		- 2：Communication LED (LED blinking）|0|●|0001
268		-|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
269		- 1：Digital setting (retentive at power failure)
270		- 2：Keypad Knob
271		- 3：AI
272		- 4：Multi-stage speed
273		- 5：Simple PLC
274		- 6：Communication|2|●|0002
275		-|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
276		-|F0.04|Running direction selection|0：Forward
277		- 1：Reverse|0|○|0004
278		-|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
279		-|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
280		-|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
281		-|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
282		-1：Stop
283		-2：Standby|0|○|0008
284		-|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
285		-|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
286		-|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
287		-|F0.12|Stop Mode|0：Decelerate to stop
288		- 1：Free stop|0|○|000C
289		-|F0.13|Retentive of digital setting frequency|0：No retentive
290		-1：retentive|1|●|000D
291		-|F0.14|Fan operating mode|0：Run when motor is running
292		- 1：Keep run when power on|0|○|000E
293		-|F0.15|AI1 Input Option|(((
294		-0：0-10V
295		-
296		-1：4-20mA
297		-
298		-2: 0-20mA
299		-
300		-3：0-5V
301		-
302		-4：0.5-4.5V
303		-)))|0|○|000F
304		-|F1.00|Default Setting Restoring|0：No Operation
305		- 1：Restore to factory default setting (not including F2 parameters)
306		- 2：Clear error records|0|●|0100
307		-|F1.01|Parameters Lockup|0：Invalid
308		- 1：Valid|0|○|0101
309		-|F1.02|User Password|0～65000|0|○|0102
310		-|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
311		-|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
312		-|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
313		-|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
314		-|F2.05|Type of Motor|(((
315		-0：Single Phase
316		-
317		-1：Three Phase
318		-)))|0|●|0205
319		-|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
320		-|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
321		-|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
322		-|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
323		-|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
324		-|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
325		-|F4.04|The current of DC braking at stop|0～100%|0|○|0404
326		-|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
327		-|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
328		-|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
329		-|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
330		-0: No function
331		-
332		-1: Forward running (FWD)
333		-
334		-2: Reverse running (REV)
335		-
336		-3: Three-wire operation control
337		-
338		-4: Forward point movement (FJOG)
339		-
340		-5: Reverse point movement (RJOG)
341		-6:Error Reset
342		- 7:Terminal UP
343		- 8:Terminal Down
344		- 9:UP/DOWN Setting Clear
345		- 10:External error input(Normally Open)
346		- 11：PLC Status reset
347		- 12:Multi stage speed terminal 1
348		- 13: Multi stage speed terminal 2
349		- 14:Reserved
350		-)))|1|●|0500
351		-|F5.01|DI2 terminal function selection|2|●|0501
352		-|F5.02|DI3 terminal function selection|6|●|0502
353		-|F5.03|DI4 terminal function selection|0|●|0503
354		-|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
355		-|F5.05|Terminal Command Option|0: Two-line mode 1
356		-1: Two-line mode 2
357		- 2: Three-line mode 1
358		-3: Three-line mode 2|0|●|0505
359		-|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
360		-|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
361		-|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
362		-|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
363		-|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
364		-|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
365		-|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
366		-|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
367		-|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
368		-|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
369		-|F5.16|AI Input Digital Functional Option|(((
370		-0: No function
371		-
372		-1: Forward running (FWD)
373		-
374		-2: Reverse running (REV)
375		-
376		-3: Three-wire operation control
377		-
378		-4: Forward point movement (FJOG)
379		-
380		-5: Reverse point movement (RJOG)
381		-6:Error Reset
382		- 7:Terminal UP
383		- 8:Terminal Down
384		- 9:UP/DOWN Setting Clear
385		- 10:External error input(Normally Open)
386		- 11：PLC Status reset
387		- 12:Multi stage speed terminal 1
388		- 13: Multi stage speed terminal 2
389		- 14:Reserved
390		-)))|0|●|0510
391		-|F5.17|AI Input Valid Level Option|(((
392		-0：Low Level Valid
393		-
394		-1：High Level Valid
395		-)))|1|○|0511
396		-|F6.00|Relay Output Option|0：No Output
397		- 1：VFD Running
398		- 2：Error Output(Output is valid only after VFD stops)
399		- 3：Ready for Running
400		- 4：Communication Setting
401		- 5: User Defined Output|0|○|0600
402		-|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
403		-|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
404		-|F6.03|(((
	282	+|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 190px;" %)Default|=(% style="width: 80px;" %)Property|=(% style="width: 87px;" %)Address
	283	+|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0000
	284	+|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
	285	+* 0：Operation panel control（LED off）
	286	+* 1：Terminal control（LED on）
	287	+* 2：Communication LED (LED blinking）
	288	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0001
	289	+|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
	290	+* 0：Digital setting (non-retentive at power failure)
	291	+* 1：Digital setting (retentive at power failure)
	292	+* 2：Keypad Knob
	293	+* 3：AI
	294	+* 4：Multi-stage speed
	295	+* 5：Simple PLC
	296	+* 6：Communication
	297	+)))|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0002
	298	+|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0003
	299	+|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
	300	+* 0：Forward
	301	+* 1：Reverse
	302	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0004
	303	+|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)●|(% style="width:87px" %)0005
	304	+|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0006
	305	+|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:190px" %)0.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0007
	306	+|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
	307	+* 0：Running at frequency lower limit
	308	+* 1：Stop
	309	+* 2：Standby
	310	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0008
	311	+|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:190px" %)6.0kHz|(% style="width:80px" %)●|(% style="width:87px" %)0009
	312	+|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000A
	313	+|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000B
	314	+|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
	315	+* 0：Decelerate to stop
	316	+* 1：Free stop
	317	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000C
	318	+|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
	319	+* 0：No retentive
	320	+* 1：retentive
	321	+)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)000D
	322	+|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
	323	+* 0：Run when motor is running
	324	+* 1：Keep run when power on
	325	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000E
	326	+|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
	327	+* 0: 0-10V
	328	+* 1: 4-20mA
	329	+* 2: 0-20mA
	330	+* 3: 0-5V
	331	+* 4: 0.5-4.5V
	332	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000F
	333	+|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
	334	+* 0: No Operation
	335	+* 1: Restore to factory default setting (not including F2 parameters)
	336	+* 2: Clear error records
	337	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0100
	338	+|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
	339	+* 0: Invalid
	340	+* 1: Valid
	341	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0101
	342	+|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0102
	343	+|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0200
	344	+|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0201
	345	+|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0202
	346	+|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0203
	347	+|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
	348	+* 0: Single Phase
	349	+* 1: Three Phase
	350	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0205
	351	+|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:190px" %)80|(% style="width:80px" %)○|(% style="width:87px" %)0206
	352	+|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:190px" %)130|(% style="width:80px" %)○|(% style="width:87px" %)0207
	353	+|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:190px" %)4.0%|(% style="width:80px" %)○|(% style="width:87px" %)0400
	354	+|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.00Hz|(% style="width:80px" %)●|(% style="width:87px" %)0401
	355	+|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)0.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0402
	356	+|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0403
	357	+|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0404
	358	+|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0405
	359	+|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
	360	+* 0: Invalid;
	361	+* 1: Valid
	362	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0406
	363	+|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
	364	+* 0: Valid;
	365	+* 1: Invalid
	366	+)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0407
	367	+|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
	368	+* 0: No function
	369	+* 1: Forward running (FWD)
	370	+* 2: Reverse running (REV)
	371	+* 3: Three-wire operation control
	372	+* 4: Forward point movement (FJOG)
	373	+* 5: Reverse point movement (RJOG)
	374	+* 6: Error Reset
	375	+* 7: Terminal UP
	376	+* 8: Terminal Down
	377	+* 9: UP/DOWN Setting Clear
	378	+* 10: External error input(Normally Open)
	379	+* 11: PLC Status reset
	380	+* 12: Multi stage speed terminal 1
	381	+* 13: Multi stage speed terminal 2
	382	+* 14: Reserved
	383	+)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0500
	384	+|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0501
	385	+|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:190px" %)6|(% style="width:80px" %)●|(% style="width:87px" %)0502
	386	+|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0503
	387	+|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:190px" %)0.010s|(% style="width:80px" %)○|(% style="width:87px" %)0504
	388	+|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
	389	+* 0: Two-line mode 1
	390	+* 1: Two-line mode 2
	391	+* 2: Three-line mode 1
	392	+* 3: Three-line mode 2
	393	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0505
	394	+|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:190px" %)0.50Hz|(% style="width:80px" %)○|(% style="width:87px" %)0506
	395	+|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:190px" %)0.00V|(% style="width:80px" %)○|(% style="width:87px" %)0507
	396	+|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)0508
	397	+|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:190px" %)10.00V|(% style="width:80px" %)○|(% style="width:87px" %)0509
	398	+|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)100.0%|(% style="width:80px" %)○|(% style="width:87px" %)050A
	399	+|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:190px" %)0.10s|(% style="width:80px" %)○|(% style="width:87px" %)050B
	400	+|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050C
	401	+|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050D
	402	+|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050E
	403	+|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050F
	404	+|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
	405	+* 0: No function
	406	+* 1: Forward running (FWD)
	407	+* 2: Reverse running (REV)
	408	+* 3: Three-wire operation control
	409	+* 4: Forward point movement (FJOG)
	410	+* 5: Reverse point movement (RJOG)
	411	+* 6: Error Reset
	412	+* 7: Terminal UP
	413	+* 8: Terminal Down
	414	+* 9: UP/DOWN Setting Clear
	415	+* 10: External error input(Normally Open)
	416	+* 11: PLC Status reset
	417	+* 12: Multi stage speed terminal 1
	418	+* 13: Multi stage speed terminal 2
	419	+* 14: Reserved
	420	+)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0510
	421	+|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
	422	+* 0: Low Level Valid
	423	+* 1: High Level Valid
	424	+)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0511
	425	+|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
	426	+* 0: No Output
	427	+* 1: VFD Running
	428	+* 2: Error Output(Output is valid only after VFD stops)
	429	+* 3: Ready for Running
	430	+* 4: Communication Setting
	431	+* 5: User Defined Output
	432	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0600
	433	+|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0601
	434	+|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0602
	435	+|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
405	405	User defined output
406	406
407	407	Variability option（EX）
408		-)))|0：Running Frequency
409		- 1：Set Frequency
410		- 2：Bus Voltage
411		- 3：Output Voltage
412		- 4：Output Current|0|○|0603
413		-|F6.04|User defined comparison method|Units digit：comparison test method
414		-0: Equal (EX==X1)
415		-1: Equal or greater than
416		-2: Equal or less than
417		-3 Interval comparison (X1≤EX≤X2)
418		-4:Units digit test (EX&X1=X2)
	439	+)))|(% style="width:428px" %)(((
	440	+* 0: Running Frequency
	441	+* 1: Set Frequency
	442	+* 2: Bus Voltage
	443	+* 3: Output Voltage
	444	+* 4: Output Current
	445	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0603
	446	+|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
	447	+* 0: Equal (EX==X1)
	448	+* 1: Equal or greater than
	449	+* 2: Equal or less than
	450	+* 3: Interval comparison (X1≤EX≤X2)
	451	+* 4: Units digit test (EX&X1=X2)
	452	+
419	419	Tens digit: output method
420		- 0: False value output
421		-1: Real value output|0|○|0604
422		-|F6.05|User defined output dead zone|0～65535|0|○|0605
423		-|F6.06|(((
	454	+
	455	+* 0: False value output
	456	+* 1: Real value output
	457	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0604
	458	+|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0605
	459	+|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
424	424	User-defined output
425	425
426	426	comparison value 1
427		-)))|0～65535|0|○|0606
428		-|F6.07|(((
	463	+)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0606
	464	+|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
429	429	User-defined output
430	430
431	431	comparison value 2
432		-)))|0～65535|0|○|0607
433		-|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
434		- 1：Set Frequency（0～F0.05）
435		- 2：Output Current（0～Double Rated Current of VFD）
436		- 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
437		- 4：AI（0～10V）
438		- 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
439		-|F6.09|AO2 Output Option|0|○|0609
440		-|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
441		-|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
442		-|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
443		-|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
444		-|F7.00|Reserved|Reserved|0|○|0700
445		-|F7.01|STOP Button Function|0：Valid only at keypad control mode
446		- 1：Valid at all control modes|1|○|0701
447		-|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
448		-Bit0：Running Frequency(Hz)
449		- Bit1：Set Frequency(Hz)
450		- Bit2：Bus Voltage(V)
451		- Bit3：Output Voltage(V)
452		- Bit4：Output Current(A)
453		- Bit5：DI Input Status
454		- Bit6：DO Output Status
455		- Bit7：Keypad Knob Voltage(V)
	468	+)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0607
	469	+|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
	470	+* 0: Running Frequency（0～F0.05）
	471	+* 1: Set Frequency（0～F0.05）
	472	+* 2: Output Current（0～Double Rated Current of VFD）
	473	+* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
	474	+* 4: AI（0～10V）
	475	+* 5: Bus Voltage（0～500.0/1000.0V）
	476	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0608
	477	+|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0609
	478	+|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060A
	479	+|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060B
	480	+|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060C
	481	+|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060D
	482	+|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0700
	483	+|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
	484	+* 0: Valid only at keypad control mode
	485	+* 1: Valid at all control modes
	486	+)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0701
	487	+|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
	488	+* Bit0: Running Frequency(Hz)
	489	+* Bit1: Set Frequency(Hz)
	490	+* Bit2: Bus Voltage(V)
	491	+* Bit3: Output Voltage(V)
	492	+* Bit4: Output Current(A)
	493	+* Bit5: DI Input Status
	494	+* Bit6: DO Output Status
	495	+* Bit7: Keypad Knob Voltage(V)
	496	+* Bit8: AIVoltage(V)
	497	+* Bit9: Load Speed
	498	+* Bit10: PID Set Value
	499	+* Bit11: PID Feedback Value
	500	+* Bit12: PLC Stage
	501	+* Bit13: Feedback Frequency（Unit：0.1Hz)
	502	+* Bit14: Communication Set Value
	503	+* Bit15: Main Frequency Source X
	504	+)))|(% style="width:190px" %)0x1F|(% style="width:80px" %)○|(% style="width:87px" %)0702
	505	+|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:190px" %)0x06|(% style="width:80px" %)○|(% style="width:87px" %)0703
	506	+|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:190px" %)3.000|(% style="width:80px" %)○|(% style="width:87px" %)0704
	507	+|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:190px" %)-|(% style="width:80px" %)◎|(% style="width:87px" %)0705
	508	+|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)2.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0800
	509	+|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0801
	510	+|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0802
	511	+|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0803
	512	+|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
	513	+* 0: valid
	514	+* 1: invalid
	515	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0804
	516	+|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0805
	517	+|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
	518	+* 0：Invalid
	519	+* 1：Valid
	520	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0806
	521	+|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
	522	+* 0: Invalid
	523	+* 1: Valid
	524	+)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0807
	525	+|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C00
	526	+|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
	527	+* 0: 4800bPS
	528	+* 1: 9600bPS
	529	+* 2: 19200bPS
	530	+)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C01
	531	+|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
	532	+* 0: No check, data format (8.N.1)
	533	+* 1: Odd Parity check, data format (8.O.1)
	534	+* 2: Even parity check, data format (8.E.1)
	535	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0C02
	536	+|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:190px" %)2|(% style="width:80px" %)○|(% style="width:87px" %)0C03
	537	+|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0C04
	538	+|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D00
	539	+|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D01
	540	+|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D02
	541	+|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D03
	542	+|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
	543	+* 0: Stop after the AC Drive runs one cycle
	544	+* 1: Keep final values after the AC Drive runs one cycle
	545	+* 2: Repeat after the AC Drive runs one cycle
	546	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D04
	547	+|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
	548	+Tens Digit：(((
	549	+* 0: Invalid
	550	+* 1: Valid
	551	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D05
	552	+|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D06
	553	+|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D07
	554	+|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D08
	555	+|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D09
	556	+|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0A
	557	+|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0B
	558	+|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0C
	559	+|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0D
	560	+|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
	561	+* 0: s（second）
	562	+* 1: h（hour）
	563	+* 2: min（minute）
	564	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0E
	565	+|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
	566	+* 0: Set by FD.00
	567	+* 1: AI
	568	+)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0F
456	456
457		-Bit8：AIVoltage(V)
458		- Bit9：Load Speed
459		- Bit10：PID Set Value
460		- Bit11：PID Feedback Value
461		- Bit12：PLC Stage
462		- Bit13：Feedback Frequency（Unit：0.1Hz)
463		-
464		-Bit14：Communication Set Value
465		- Bit15：Main Frequency Source X
466		-)))|0x1F|○|0702
467		-|F7.03|LED display parameters at stop status|0x06|○|0703
468		-|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
469		-|F7.05|Software Version|-|-|◎|0705
470		-|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
471		-|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
472		-|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
473		-|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
474		-|F8.04|Reverse control|(((
475		-0：valid
476		-
477		-1：invalid
478		-)))|0|○|0804
479		-|F8.05|Reserved|0|0|●|0805
480		-|F8.06|Startup Protection Option|0：Invalid
481		- 1：Valid|0|○|0806
482		-|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
483		-|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
484		-|FC.01|Baud Rate|0：4800bPS
485		- 1：9600bPS
486		- 2：19200bPS|1|○|0C01
487		-|FC.02|Data format|0：No check, data format (8.N.1)
488		- 1：Odd Parity check, data format (8.O.1)
489		- 2：Even parity check, data format (8.E.1)|0|○|0C02
490		-|FC.03|Respond Delay|0ms～20ms|2|○|0C03
491		-|FC.04|Reserved|0|0|●|0C04
492		-|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
493		-|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
494		-|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
495		-|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
496		-|FD.04|Simple PLC running mode|(((
497		-0:Stop after the AC Drive runs one cycle
498		-
499		-1:Keep final values after the AC Drive runs one cycle
500		-
501		-2:Repeat after the AC Drive runs one cycle
502		-)))|0|○|0D04
503		-|FD.05|Simple PLC retentive option|Units Digit：Reserved
504		- Tens Digit：
505		- 0：Invalid
506		- 1：Valid|0|○|0D05
507		-|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
508		-|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
509		-|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
510		-|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
511		-|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
512		-|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
513		-|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
514		-|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
515		-|FD.14|Time unit of simple PLC running|0：s（second）
516		- 1：h（hour）
517		- 2：min（minute）|0|○|0D0E
518		-|FD.15|The source of multistage speed 0|(((
519		-0：Set by FD.00
520		-
521		-1：AI
522		-)))|0|○|0D0F
523		-
524	524	== Monitoring Parameters ==
525	525
526		-|Parameter|Name|Minimum Unit|Priority|Address
527		-|D0.00|Running Frequency(Hz)|0.01Hz|◎|D000
528		-|D0.01|Set Frequency(Hz)|0.01Hz|◎|D001
529		-|D0.02|Bus Voltage(V)|0.1V|◎|D002
530		-|D0.03|Output Voltage(V)|1V|◎|D003
531		-|D0.04|Output Current(A)|0.01A|◎|D004
532		-|D0.05|IGBT Module Temperature（℃）|0.1℃|◎|D005
533		-|D0.06|DI Input Status|1|◎|D006
534		-|D0.07|DO Output Status|1|◎|D007
535		-|D0.08|Keypad Knob Voltage|0.01V|◎|D008
536		-|D0.09|AI Voltage(V)|0.01V|◎|D009
537		-|D0.10|Reserved|1|◎|D010
538		-|D0.13|PLC Stage|1|◎|D013
539		-|D0.14|Feedback Speed(Unit0.1Hz)|0.1Hz|◎|D014
	572	+|=(% scope="row" %)Parameter|=Name|=(% style="width: 257px;" %)Minimum Unit|=(% style="width: 160px;" %)Priority|=(% style="width: 113px;" %)Address
	573	+|=D0.00|Running Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D000
	574	+|=D0.01|Set Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D001
	575	+|=D0.02|Bus Voltage(V)|(% style="width:257px" %)0.1V|(% style="width:160px" %)◎|(% style="width:113px" %)D002
	576	+|=D0.03|Output Voltage(V)|(% style="width:257px" %)1V|(% style="width:160px" %)◎|(% style="width:113px" %)D003
	577	+|=D0.04|Output Current(A)|(% style="width:257px" %)0.01A|(% style="width:160px" %)◎|(% style="width:113px" %)D004
	578	+|=D0.05|IGBT Module Temperature（℃）|(% style="width:257px" %)0.1℃|(% style="width:160px" %)◎|(% style="width:113px" %)D005
	579	+|=D0.06|DI Input Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D006
	580	+|=D0.07|DO Output Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D007
	581	+|=D0.08|Keypad Knob Voltage|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D008
	582	+|=D0.09|AI Voltage(V)|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D009
	583	+|=D0.10|Reserved|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D010
	584	+|=D0.13|PLC Stage|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D013
	585	+|=D0.14|Feedback Speed(Unit0.1Hz)|(% style="width:257px" %)0.1Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D014
540	540
541	541	== Error Records ==
542	542
543		-|Parameter|Name|Range and Description|Priority|Address
544		-|E0.00|Latest error type|No Error:0
545		- Acceleration Over Current：Err02
546		- Deceleration Over Current：Err03
547		- Over Current at constant speed：Err04
548		- Acceleration Over Voltage：Err05
549		- Deceleration Over Voltage：Err06
550		- Over Voltage at constant speed：Err07
551		- Low Voltage error：Err09
552		- VFD overload：Err10
553		- Motor overload：Err11
554		- IGBT overheat：Err14
555		- External Error：Err15
556		- Current Detection Error：Err18
557		- Parameter writing/reading error：Err21
558		- EEPROM writing/reading error:Err22|●|　E000
559		-|E0.01|Running Frequency at latest error|0.0Hz-F0.05|●|　E001
560		-|E0.02|Output Current at latest error|0.00-655.35|●|　E002
561		-|E0.03|Bus Voltage at latest error|0.0-810|●|　E003
562		-|E0.04|Input terminals status at latest error|0-63|●|　E004
563		-|E0.05|IGBT temperature at latest error|0-65535|●|　E005
564		-|E1.00|Former error type|As E0.00|●|　E100
565		-|E1.01|Running Frequency at former error|0.0Hz-F0.05|●|　E101
566		-|E1.02|Output Current at former error|0.00-655.35|●|　E102
567		-|E1.03|Bus Voltage at former error|0.0-810|●|　E103
568		-|E1.04|Input terminals status at former error|0-63|●|　E104
569		-|E1.05|IGBT temperature at former error|0-65535|●|　E105
	589	+|=(% scope="row" %)Parameter|=Name|=(% style="width: 429px;" %)Range and Description|=(% style="width: 124px;" %)Priority|=(% style="width: 129px;" %)Address
	590	+|=E0.00|Latest error type|(% style="width:429px" %)(((
	591	+* No Error: 0
	592	+* Acceleration Over Current: Err02
	593	+* Deceleration Over Current: Err03
	594	+* Over Current at constant speed: Err04
	595	+* Acceleration Over Voltage: Err05
	596	+* Deceleration Over Voltage: Err06
	597	+* Over Voltage at constant speed: Err07
	598	+* Low Voltage error: Err09
	599	+* VFD overload: Err10
	600	+* Motor overload: Err11
	601	+* IGBT overheat: Err14
	602	+* External Error: Err15
	603	+* Current Detection Error: Err18
	604	+* Parameter writing/reading error: Err21
	605	+* EEPROM writing/reading error: Err22
	606	+)))|(% style="width:124px" %)●|(% style="width:129px" %)　E000
	607	+|=E0.01|Running Frequency at latest error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E001
	608	+|=E0.02|Output Current at latest error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E002
	609	+|=E0.03|Bus Voltage at latest error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E003
	610	+|=E0.04|Input terminals status at latest error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E004
	611	+|=E0.05|IGBT temperature at latest error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E005
	612	+|=E1.00|Former error type|(% style="width:429px" %)As E0.00|(% style="width:124px" %)●|(% style="width:129px" %)　E100
	613	+|=E1.01|Running Frequency at former error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E101
	614	+|=E1.02|Output Current at former error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E102
	615	+|=E1.03|Bus Voltage at former error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E103
	616	+|=E1.04|Input terminals status at former error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E104
	617	+|=E1.05|IGBT temperature at former error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E105
570	570
571	571	= 7 Communication Protocol =
572	572
...	...	@@ -574,52 +574,52 @@
574	574
575	575	== Communication Control Address ==
576	576
577		-|Function|Address|Description|Remarks|Characteristic
578		-|Communication Set Value|1000H|-10000～10000（with ± sign）|F0.05*（±100.00%）|R/W
579		-|(% rowspan="7" %)Control Command|(% rowspan="7" %)2000H|0001: Forward running|-|W
580		-|0002: Reverse running|-|W
581		-|0003: JOG forward|-|W
582		-|0004: JOG reverse|-|W
583		-|0005: Free stop|-|W
584		-|0006: Deceleration stop|-|W
585		-|0007: Fault reset|-|W
586		-|(% rowspan="3" %)Running Status|(% rowspan="3" %)3000H|0001：FWD running|-|R
587		-|0002：REV running|-|R
588		-|0003：Stopped|-|R
589		-|(% rowspan="11" %)Monitoring Data|1001H|Running Frequency（Hz）|2 decimal places|R
590		-|1002H|Set Frequency（Hz）|2 decimal places|R
591		-|1003H|Bus Voltage（V）|1 decimal place|R
592		-|1004H|Output Voltage（V）|1 decimal place|R
593		-|1005H|Output Current（A）|2 decimal places|R
594		-|1006H|IGBT Temperature|1 decimal place|R
595		-|1007H|Digital input status|DI1-DI4 Added by binary bit weight|R
596		-|1009H|Keypad Knob Voltage（V）|1 decimal place|R
597		-|101AH|AI Volatage （V）|1 decimal place|R
598		-|100BH|Load Speed Display|1 decimal place|R
599		-|100EH|PLC Stage|Simple PLC running stage|R
600		-|(% rowspan="14" %)Failure status|(% rowspan="14" %)8000H|0000：No error|-|R
601		-|0002：Acceleration Over Current|-|R
602		-|0003：Acceleration Over Current|-|R
603		-|0004：Over Current at Constant Speed|-|R
604		-|0005：Acceleration Over Voltage|-|R
605		-|0006：Deceleration Over Voltage|-|R
606		-|0007：Over Voltage at Constant Speed|-|R
607		-|0009：Low Voltage Error|-|R
608		-|000A：VFD Overload|-|R
609		-|000B：Motor Overload|-|R
610		-|000E：IGBT Overheat|-|R
611		-|000F：External Error|-|R
612		-|0012：Current Detection Error|-|R
613		-|0015：Parameters Writing/Reading Error|-|R
614		-|(% rowspan="9" %)Communication Error Feedback|(% rowspan="9" %)8001H|0000：No Error|-|R
615		-|0001：Password Error|-|R
616		-|0002：Command Code Error|-|R
617		-|0003：CRCError|-|R
618		-|0004：Invalid Address|-|R
619		-|0005：Invalid Parameter|-|R
620		-|0006：Parameters Adjustment Failed|-|R
621		-|0007：System Locked|-|R
622		-|0008：Parameters Being Saved|-|R
	625	+|=(% scope="row" style="width: 284px;" %)Function|=(% style="width: 134px;" %)Address|=(% style="width: 360px;" %)Description|=(% style="width: 276px;" %)Remarks|=Characteristic
	626	+|=(% style="width: 284px;" %)Communication Set Value|(% style="width:134px" %)1000H|(% style="width:360px" %)-10000～10000 (with ± sign)|(% style="width:276px" %)F0.05* (±100.00%)|R/W
	627	+|=(% rowspan="7" style="width: 284px;" %)Control Command|(% rowspan="7" style="width:134px" %)2000H|(% style="width:360px" %)0001: Forward running|(% style="width:276px" %)-|W
	628	+|(% scope="row" style="width:360px" %)0002: Reverse running|(% style="width:276px" %)-|W
	629	+|(% scope="row" style="width:360px" %)0003: JOG forward|(% style="width:276px" %)-|W
	630	+|(% scope="row" style="width:360px" %)0004: JOG reverse|(% style="width:276px" %)-|W
	631	+|(% scope="row" style="width:360px" %)0005: Free stop|(% style="width:276px" %)-|W
	632	+|(% scope="row" style="width:360px" %)0006: Deceleration stop|(% style="width:276px" %)-|W
	633	+|(% scope="row" style="width:360px" %)0007: Fault reset|(% style="width:276px" %)-|W
	634	+|=(% rowspan="3" style="width: 284px;" %)Running Status|(% rowspan="3" style="width:134px" %)3000H|(% style="width:360px" %)0001: FWD running|(% style="width:276px" %)-|R
	635	+|(% scope="row" style="width:360px" %)0002: REV running|(% style="width:276px" %)-|R
	636	+|(% scope="row" style="width:360px" %)0003: Stopped|(% style="width:276px" %)-|R
	637	+|=(% rowspan="11" style="width: 284px;" %)Monitoring Data|(% style="width:134px" %)1001H|(% style="width:360px" %)Running Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
	638	+|(% scope="row" style="width:134px" %)1002H|(% style="width:360px" %)Set Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
	639	+|(% scope="row" style="width:134px" %)1003H|(% style="width:360px" %)Bus Voltage（V）|(% style="width:276px" %)1 decimal place|R
	640	+|(% scope="row" style="width:134px" %)1004H|(% style="width:360px" %)Output Voltage（V）|(% style="width:276px" %)1 decimal place|R
	641	+|(% scope="row" style="width:134px" %)1005H|(% style="width:360px" %)Output Current（A）|(% style="width:276px" %)2 decimal places|R
	642	+|(% scope="row" style="width:134px" %)1006H|(% style="width:360px" %)IGBT Temperature|(% style="width:276px" %)1 decimal place|R
	643	+|(% scope="row" style="width:134px" %)1007H|(% style="width:360px" %)Digital input status|(% style="width:276px" %)DI1-DI4 Added by binary bit weight|R
	644	+|(% scope="row" style="width:134px" %)1009H|(% style="width:360px" %)Keypad Knob Voltage（V）|(% style="width:276px" %)1 decimal place|R
	645	+|(% scope="row" style="width:134px" %)101AH|(% style="width:360px" %)AI Volatage （V）|(% style="width:276px" %)1 decimal place|R
	646	+|(% scope="row" style="width:134px" %)100BH|(% style="width:360px" %)Load Speed Display|(% style="width:276px" %)1 decimal place|R
	647	+|(% scope="row" style="width:134px" %)100EH|(% style="width:360px" %)PLC Stage|(% style="width:276px" %)Simple PLC running stage|R
	648	+|=(% rowspan="14" style="width: 284px;" %)Failure status|(% rowspan="14" style="width:134px" %)8000H|(% style="width:360px" %)0000: No error|(% style="width:276px" %)-|R
	649	+|(% scope="row" style="width:360px" %)0002: Acceleration Over Current|(% style="width:276px" %)-|R
	650	+|(% scope="row" style="width:360px" %)0003: Acceleration Over Current|(% style="width:276px" %)-|R
	651	+|(% scope="row" style="width:360px" %)0004: Over Current at Constant Speed|(% style="width:276px" %)-|R
	652	+|(% scope="row" style="width:360px" %)0005: Acceleration Over Voltage|(% style="width:276px" %)-|R
	653	+|(% scope="row" style="width:360px" %)0006: Deceleration Over Voltage|(% style="width:276px" %)-|R
	654	+|(% scope="row" style="width:360px" %)0007: Over Voltage at Constant Speed|(% style="width:276px" %)-|R
	655	+|(% scope="row" style="width:360px" %)0009: Low Voltage Error|(% style="width:276px" %)-|R
	656	+|(% scope="row" style="width:360px" %)000A: VFD Overload|(% style="width:276px" %)-|R
	657	+|(% scope="row" style="width:360px" %)000B: Motor Overload|(% style="width:276px" %)-|R
	658	+|(% scope="row" style="width:360px" %)000E: IGBT Overheat|(% style="width:276px" %)-|R
	659	+|(% scope="row" style="width:360px" %)000F: External Error|(% style="width:276px" %)-|R
	660	+|(% scope="row" style="width:360px" %)0012: Current Detection Error|(% style="width:276px" %)-|R
	661	+|(% scope="row" style="width:360px" %)0015: Parameters Writing/Reading Error|(% style="width:276px" %)-|R
	662	+|=(% rowspan="9" style="width: 284px;" %)Communication Error Feedback|(% rowspan="9" style="width:134px" %)8001H|(% style="width:360px" %)0000: No Error|(% style="width:276px" %)-|R
	663	+|(% scope="row" style="width:360px" %)0001: Password Error|(% style="width:276px" %)-|R
	664	+|(% scope="row" style="width:360px" %)0002: Command Code Error|(% style="width:276px" %)-|R
	665	+|(% scope="row" style="width:360px" %)0003: CRCError|(% style="width:276px" %)-|R
	666	+|(% scope="row" style="width:360px" %)0004: Invalid Address|(% style="width:276px" %)-|R
	667	+|(% scope="row" style="width:360px" %)0005: Invalid Parameter|(% style="width:276px" %)-|R
	668	+|(% scope="row" style="width:360px" %)0006: Parameters Adjustment Failed|(% style="width:276px" %)-|R
	669	+|(% scope="row" style="width:360px" %)0007: System Locked|(% style="width:276px" %)-|R
	670	+|(% scope="row" style="width:360px" %)0008: Parameters Being Saved|(% style="width:276px" %)-|R
623	623
624	624	Sheet 5-1-1 Control Command Addresses
625	625
...	...	@@ -635,12 +635,12 @@
635	635
636	636	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
637	637
638		-= 9 Troubleshooting & countermeasures =
	686	+= 8 Troubleshooting & countermeasures =
639	639
640	640	== Faults and solutions ==
641	641
642		-|Fault code|Fault type|Reason|Solution
643		-|Err02|Overcurrent during acceleration|(((
	690	+|=(% scope="row" %)Fault code|=Fault type|=Reason|=Solution
	691	+|=Err02|Overcurrent during acceleration|(((
644	644	~1. The output circuit of AC Drive is grounded or short circuited.
645	645
646	646	2. The acceleration time is too short.
...	...	@@ -657,7 +657,7 @@
657	657
658	658	4. Select the AC Drive of higher power.
659	659	)))
660		-|Err03|Overcurrent during deceleration|(((
	708	+|=Err03|Overcurrent during deceleration|(((
661	661	~1. The output circuit of AC Drive is grounded or short circuited.
662	662
663	663	2. The deceleration time is too short.
...	...	@@ -666,7 +666,7 @@
666	666
667	667	2. Increase the deceleration time.
668	668	)))
669		-|Err04|Overcurrent at constant speed|(((
	717	+|=Err04|Overcurrent at constant speed|(((
670	670	~1. The output circuit of AC Drive is grounded or short circuited.
671	671
672	672	2. The AC Drive model is of too small power.
...	...	@@ -675,7 +675,7 @@
675	675
676	676	2. Select the AC Drive of higher power.
677	677	)))
678		-|Err05|Overvoltage during acceleration|(((
	726	+|=Err05|Overvoltage during acceleration|(((
679	679	~1. Input voltage abnormal.
680	680
681	681	2. An external force drives the motor during acceleration.
...	...	@@ -692,7 +692,7 @@
692	692
693	693	4. Installed the braking unit and braking resistor.
694	694	)))
695		-|Err06|Overvoltage during deceleration|(((
	743	+|=Err06|Overvoltage during deceleration|(((
696	696	~1. Input voltage abnormal.
697	697
698	698	2. An external force drives the motor during deceleration.
...	...	@@ -709,7 +709,7 @@
709	709
710	710	4. Installed the braking unit and braking resistor.
711	711	)))
712		-|Err07|Overvoltage at constant speed|(((
	760	+|=Err07|Overvoltage at constant speed|(((
713	713	~1. Input voltage abnormal.
714	714
715	715	2. An external force drives the motor during deceleration.
...	...	@@ -718,7 +718,7 @@
718	718
719	719	2. Cancel the external force.
720	720	)))
721		-|Err09|Undervoltage|(((
	769	+|=Err09|Undervoltage|(((
722	722	~1. Instantaneous power failure occurs on the input supply.
723	723
724	724	2. The input voltage is not within the normal range.
...	...	@@ -731,7 +731,7 @@
731	731
732	732	3. Looking for technical service.
733	733	)))
734		-|Err10|AC Drive overload|(((
	782	+|=Err10|AC Drive overload|(((
735	735	~1. The load is too heavy or lockedrotor occurs on motor.
736	736
737	737	2. The AC Drive model is of too small power.
...	...	@@ -740,7 +740,7 @@
740	740
741	741	2. Select the AC Drive of higher power.
742	742	)))
743		-|Err11|Motor overload|(((
	791	+|=Err11|Motor overload|(((
744	744	The parameter setting of F2.03 does not match the motor
745	745
746	746	2. The AC Drive model is of too small power.
...	...	@@ -749,7 +749,7 @@
749	749
750	750	2. Reduce the load and check the motor.
751	751	)))
752		-|Err14|Module overheating|(((
	800	+|=Err14|Module overheating|(((
753	753	~1. The ambient temperature is too high.
754	754
755	755	2. The air filter is blocked.
...	...	@@ -766,8 +766,8 @@
766	766
767	767	4. Ask for technical service.
768	768	)))
769		-|Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
770		-|Err16|Communication fault|(((
	817	+|=Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
	818	+|=Err16|Communication fault|(((
771	771	~1. The PC is in abnormal state.
772	772
773	773	2. The communication cable is faulty.
...	...	@@ -780,26 +780,26 @@
780	780
781	781	3. Set the communication parameters properly.
782	782	)))
783		-|Err18|Current detection fault|(((
	831	+|=Err18|Current detection fault|(((
784	784	~1. Current detection circuit is abnormal.
785	785
786	786	2. Control circuit is abnormal.
787	787	)))|1. Ask for technical service.
788		-|Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
789		-|Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
	836	+|=Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
	837	+|=Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
790	790
791	791	Table 6-1-1 Faults and solutions
792	792
793	793	== Common faults and solutions ==
794	794
795		-|**SN**|**Fault**|**Possible causes**|**Solutions**
796		-|1|No display at power-on state|(((
	843	+|=(% scope="row" style="width: 59px;" %)**SN**|=(% style="width: 232px;" %)**Fault**|=(% style="width: 437px;" %)**Possible causes**|=(% style="width: 475px;" %)**Solutions**
	844	+|=(% style="width: 59px;" %)1|(% style="width:232px" %)No display at power-on state|(% style="width:437px" %)(((
797	797	~1. The input power of AC Drive is abnormal.
798	798
799	799	2. The control board has a bad contact with cable that is connected to the keypad.
800	800
801	801	3. The AC Drive is abnormal.
802		-)))|(((
	850	+)))|(% style="width:475px" %)(((
803	803	~1. Check the input power.
804	804
805	805	2. Re-connect the cable.
...	...	@@ -806,7 +806,7 @@
806	806
807	807	3. Ask for technical service.
808	808	)))
809		-|2|The motor does not rotate after the AC Drive runs.|(((
	857	+|=(% style="width: 59px;" %)2|(% style="width:232px" %)The motor does not rotate after the AC Drive runs.|(% style="width:437px" %)(((
810	810	~1. The motor is damaged.
811	811
812	812	2. The motor cables is abnormal.
...	...	@@ -814,7 +814,7 @@
814	814	3. The cable between the drive board and control board is in poor contact.
815	815
816	816	4. The AC Drive is abnormal.
817		-)))|(((
	865	+)))|(% style="width:475px" %)(((
818	818	~1. Replay the motor.
819	819
820	820	2. Ensure the cable between the AC Drive and the motor is normal.
...	...	@@ -823,13 +823,13 @@
823	823
824	824	4. Ask for technical service.
825	825	)))
826		-|3|DI termianls are disabled.|(((
	874	+|=(% style="width: 59px;" %)3|(% style="width:232px" %)DI termianls are disabled.|(% style="width:437px" %)(((
827	827	~1. The parameters are set incorrectly.
828	828
829	829	2. The external signal is incorrect.
830	830
831	831	3. The control board is abnormal.
832		-)))|(((
	880	+)))|(% style="width:475px" %)(((
833	833	~1. Check and reset the parameters in group F5.
834	834
835	835	2. Re-connect the external signal cables.
...	...	@@ -836,13 +836,13 @@
836	836
837	837	3. Ask for technical service.
838	838	)))
839		-|4|AC Drive interference|(((
	887	+|=(% style="width: 59px;" %)4|(% style="width:232px" %)AC Drive interference|(% style="width:437px" %)(((
840	840	~1. Carrier frequency setting is not suitable.
841	841
842	842	2. The grounding method of the AC Drive and the motor is incorrect.
843	843
844	844	3. The wire between the AC Drive and the motor is too long.
845		-)))|(((
	893	+)))|(% style="width:475px" %)(((
846	846	~1. Reduce the carrier frequency
847	847
848	848	2. The AC Drive and the motor are effectively grounded and separated from the ground of the peripheral device.
...	...	@@ -849,22 +849,22 @@
849	849
850	850	3. Install out reactor or reduce wire distance.
851	851	)))
852		-|5|Motor noise is too loud.|(((
	900	+|=(% style="width: 59px;" %)5|(% style="width:232px" %)Motor noise is too loud.|(% style="width:437px" %)(((
853	853	~1. Motor damage or mechanical failure.
854	854
855	855	2. Carrier frequency setting is too small.
856		-)))|(((
	904	+)))|(% style="width:475px" %)(((
857	857	~1. Replace the motor or clear the mechanical fault.
858	858
859	859	2. Increase the carrier frequency appropriately.
860	860	)))
861		-|6|Switch trip|(((
	909	+|=(% style="width: 59px;" %)6|(% style="width:232px" %)Switch trip|(% style="width:437px" %)(((
862	862	~1. Installed a leakage switch or an air switch overload.
863	863
864	864	2. The input power of AC Drive is abnormal.
865	865
866	866	3. The AC Drive is damaged.
867		-)))|(((
	915	+)))|(% style="width:475px" %)(((
868	868	~1. Replay the leakage switch or replay the larfer capacity air switch.
869	869
870	870	2. Eliminate whether the input power is shorted.
...	...	@@ -873,10 +873,3 @@
873	873	)))
874	874
875	875	Table 6-2-1 Common faults and solutions
876		-
877		-
878		-(((
879		-
880		-)))
881		-
882		-