Changes for page 1 VM Series Manual V1.2

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-1 VM AC Drive Manual
	1	+1 VM AC Drive User Manual

Content

...	...	@@ -1,10 +1,5 @@
1		-(% class="box infomessage" %)
2		-(((
3		-**This is the old version VM series. S/N on the inverter starts from "X0".**
4		-)))
	1	+= Preface =
5	5
6		-= 1 Preface =
7		-
8	8	Thank you for choosing WECON VM Series AC Drive.
9	9
10	10	This user manual introduces the technical specifications, installation instructions, functions and performance of VM Series AC Drive properly. Please read this user manual carefully before carrying out works such as installation, commissioning, maintenance, etc.
...	...	@@ -13,8 +13,9 @@
13	13
14	14	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
15	15
16		-= 2 Safety precautions =
17	17
	12	+= Safety precautions =
	13	+
18	18	**■ Warning sign**
19	19
20	20	[[image:WECON VM 英文 V01_html_f697a083b5da7fc8.png]] DANGER: Indicates that failure to comply with the notice will result in severe personal injure or even death.
...	...	@@ -21,7 +21,7 @@
21	21
22	22	[[image:WECON VM 英文 V01_html_b36792972403c101.png]] WARNING: Indicates that failure to comply with the notice will result in moderate personal injury, property damage or equipment damage.
23	23
24		-(% class="warning" %)|**WARNING**
	20	+|**WARNING**
25	25	|(((
26	26	◎Do not install or operate any AC Drive that is damaged or with missing parts. Failing to follow this rule can result in facility damage or severe injury.
27	27
...	...	@@ -52,7 +52,7 @@
52	52	◎The PCB board has a CMOS integrated circuit. Do not touch it with your hands, otherwise, static electricity will damage the PCB board.
53	53	)))
54	54
55		-(% class="warning" %)|**DANGER**
	51	+|**DANGER**
56	56	|(((
57	57	◎Wiring must be completed by qualified professional electricians, otherwise, there may be electric shock or damage to the AC Drive.
58	58
...	...	@@ -81,28 +81,28 @@
81	81	◎Modification to the AC Drive without permission is strictly prohibited, otherwise, severe injury may be caused. Arbitrarily modification of AC Drive will result in service warranty invalid.
82	82	)))
83	83
84		-= 3 Product information =
	80	+= Chapter 1 Product information =
85	85
86		-== Technical specifications ==
	82	+== 1.1 Technical specifications ==
87	87
88		-|=(% colspan="2" %)**Item**|=**Specifications**
	84	+|(% colspan="2" %)**Item**|**Specifications**
89	89	|(% rowspan="7" %)Control features|Control mode|V/F control
90	90	|Startup torque|0.5Hz/100%
91		-|Speed range|1: 50
	87	+|Speed range|1：50
92	92	|Speed stability accuracy|±1%
93		-|Carrier frequency|1kHz~~6kHz；
	89	+|Carrier frequency|1kHz ～ 6kHz；
94	94	|Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
95		-|Torque boost|0.0%~~30.0%
96		-|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
97		-|Input frequency range|50/60Hz；fluctuation range: ±5%
	91	+|Torque boost|0.0% ～ 30.0%
	92	+|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
	93	+|Input frequency range|50/60Hz；fluctuation range :±5%
98	98	|Output voltage range|0-input voltage; the error is less than 5%
99		-|Output frequency range|0~~400Hz
	95	+|Output frequency range|0-400Hz
100	100	|(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
101	101	|Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
102	102	|DC braking|(((
103		-Braking time: 0.0s~~50.0s;
	99	+Braking time: 0.0s ～ 50.0s;
104	104
105		-Braking action current value: 0.0%~~100.0%
	101	+Braking action current value: 0.0% ～ 100.0%
106	106	)))
107	107	|Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
108	108	|Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
...	...	@@ -110,7 +110,7 @@
110	110	|Parameters locking function|It can lock the parameters to prevent malfunction.
111	111	|(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
112	112	|Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
113		-|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
	109	+|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
114	114	|Humidity|≤95%RH, without condensing
115	115	|Vibration|Less than 5.9m/s2 (0.6g)
116	116	|Storage temperature|-25℃～+60℃
...	...	@@ -117,100 +117,92 @@
117	117
118	118	Table 1-1-1 Technical specification shee
119	119
120		-== Product nameplate ==
	116	+== 1.2 Product nameplate ==
121	121
122		-(% style="text-align:center" %)
123		-(((
124		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
125		-[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
126		-)))
	118	+[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
127	127
	120	+Figure 1-2-1 Product nameplate
128	128
129		-== Model description ==
	122	+== 1.3 Model description ==
130	130
131	131	__VM__ – __2__ __S__ __1R5GB__
132	132
133	133	①  ② ③  ④
134	134
135		-|=**Field**|=**No.**|=**Identification**|=**Description**
	128	+|**Field**|**No.**|**Identification**|**Description**
136	136	|Product series|①|Product series|VM series
137		-|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
138		-|The input power|③|Power phase identification|S: single; T: three-phase
	130	+|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
	131	+|The input power|③|Power phase identification|S: single ； T: three-phase
139	139	|Rated power|④|Power range|1R5-1.5kW，R is the decimal point
140	140
141	141	Table 1-3-1 VM series model field comment
142	142
143		-== Product model ==
	136	+== 1.4 Product model ==
144	144
145		-|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
146		-|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
147		-|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
148		-|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
149		-|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
150		-|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
151		-|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
152		-|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
153		-|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
154		-|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
155		-|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
	138	+|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
	139	+|kW|kVA|A|A|kW|HP
	140	+|VM-2SR75|0.75|1.5|8.2|4|0.75|1
	141	+|VM-2S1R5|1.5|3|14.2|7|1.5|2
	142	+|VM-2S2R2|2.2|4|23|9.6|2.2|3
	143	+|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
	144	+|VM-4T004|4|5.9|10.5|9|4/|5.5
	145	+|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
	146	+|VM-4T7R5|7.5|11|20.5|17|7.5|10
	147	+|VM-4T011*|11|17|26|25|11|15
	148	+|VM-4T015*|15|21|35|32|15|20
156	156
157	157	Table 1-4-1 Product model table
158	158
159		-(% class="box infomessage" %)
160		-(((
161	161	*:In development
162		-)))
163	163
164		-= 4 Installation =
165	165
166		-== Overall structural drawing ==
	155	+= Chapter 2 Installation =
167	167
168		-(% class="wikigeneratedid" %)
169		-unit: mm
	157	+== 2.1 Overall structural drawing（unit：mm） ==
170	170
171		-(% style="text-align:center" %)
172		-(((
173		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
174		-[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
175		-)))
	159	+[[image:1624240220324-243.png]]
176	176
	161	+Figure 2-1-1 Outline dimension diagram
177	177
178		-(% style="width:1271.22px" %)
179		-|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
180		-|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
181		-|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
182		-|=(% style="width: 267px;" %)VM-2S1R5
183		-|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
184		-|=(% style="width: 267px;" %)VM-4T2R2
185		-|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
186		-|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
187		-|=(% style="width: 267px;" %)VM-4T7R5
188		-|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
189		-|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
	163	+|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
	164	+|H|W|D|H1|W1|d
	165	+|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
	166	+|VM-2S1R5
	167	+|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
	168	+|VM-4T2R2
	169	+|VM-4T004|196|95|132|179|79|5.5
	170	+|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
	171	+|VM-4T7R5
	172	+|VM-4T011|-|-|-|-|-|-
	173	+|VM-4T015|-|-|-|-|-|-
190	190
191	191	Table 2-1-1 outline dimension
192	192
193		-== Terminal connection ==
	177	+== 2.2 Terminal connection ==
194	194
195		-(% style="text-align:center" %)
196		-(((
197		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
198		-[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
199		-)))
200	200
	180	+[[image:1624240272484-903.png]]
201	201
202		-**Main circuit connection**
	182	+Figure 2-2-1 Terminal connection
203	203
204		-|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
205		-|=R、S、T|Power supply input terminals|Connect to the AC power supply
206		-|=U、V、W|AC drive output terminals|Connect the three-phase motor.
207		-|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
208	208
	185	+
	186	+
	187	+
	188	+
	189	+
	190	+* **Main circuit connection**
	191	+
	192	+|**Terminal mark**|**Name**|**Description**
	193	+|R、S、T|Power supply input terminals|Connect to the AC power supply
	194	+|U、V、W|AC drive output terminals|Connect the three-phase motor.
	195	+|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
	196	+
209	209	Table 2-2-1 Main circuit terminals and function
210	210
211		-**Control circuit connection**
	199	+* **Control circuit connection**
212	212
213		-|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
	201	+|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
214	214	|(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
215	215	Provide +10V power supply to external unit.
216	216
...	...	@@ -228,347 +228,320 @@
228	228
229	229	Table 2-2-2 Control terminal instruction
230	230
231		-= 5 Display and operation =
	219	+= Chapter 3 Display and operation =
232	232
233		-== Keypad ==
	221	+== 3.1 Keypad ==
234	234
235	235	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
236	236
237		-(% style="text-align:center" %)
238		-(((
239		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
240		-[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
241		-)))
	225	+[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
242	242
	227	+Figure 3-1-1 Keypad diagram
243	243
244		-== Description of indicators and keys ==
	229	+== 3.2 Description of indicators and keys ==
245	245
246		-|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
247		-|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
248		-* RUN: ON/Running; OFF/Stop.
249		-* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
250		-* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
251		-* ALARM: Blinking /Fault state.
	231	+|**Item**|**Name**|**Function**
	232	+|Indicator|Status|(((
	233	+* RUN： ON/Running；OFF/Stop.
	234	+* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
	235	+* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
	236	+* ALARM：Blinking /Fault state.
252	252	)))
253		-|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
254		-PRG (Programming)
255		-)))|(% style="width:865px" %)Enter or exit the first menu.
256		-|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
257		-|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
258		-|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
259		-|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
260		-|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
	238	+|(% rowspan="6" %)keys|(((
	239	+PRG
	240	+
	241	+(Programming)
	242	+)))|Enter or exit the first menu.
	243	+|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
	244	+|△（Increment）|Increase date or function code.
	245	+|▽（Decrement）|Decrease data or function code.
	246	+|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	247	+|RUN/STOP|(((
261	261	Control drive start and stop in keypad control mode.
262	262
263	263	Perform the reset operation when it is in the fault state.
264	264	)))
265		-|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
	252	+|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
266	266
267	267	Table 3-2-1 Description of Indicators and key
268	268
269		-= 6 Parameter function =
270	270
271		-* “○”: the parameter can be modified in both standby and operating state；
272		-* “●”: the parameter can’t be modified in operating state；
273		-* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
	257	+= Chapter 4 Parameter function =
274	274
275		-(% class="box infomessage" %)
276		-(((
277		-**Note: **the communication address is hexadecimal.
278		-)))
	259	+“○”: the parameter can be modified in both standby and operating state；
279	279
280		-== Functional parameter ==
	261	+“●”: the parameter can’t be modified in operating state；
281	281
282		-|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 196px;" %)Default|=(% style="width: 64px;" %)Property|=(% style="width: 87px;" %)Address
283		-|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0000
284		-|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
285		-* 0：Operation panel control（LED off）
286		-* 1：Terminal control（LED on）
287		-* 2：Communication LED (LED blinking）
288		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0001
289		-|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
290		-* 0：Digital setting (non-retentive at power failure)
291		-* 1：Digital setting (retentive at power failure)
292		-* 2：Keypad Knob
293		-* 3：AI
294		-* 4：Multi-stage speed
295		-* 5：Simple PLC
296		-* 6：Communication
297		-)))|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0002
298		-|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0003
299		-|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
300		-* 0：Forward
301		-* 1：Reverse
302		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0004
303		-|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)●|(% style="width:87px" %)0005
304		-|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0006
305		-|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:196px" %)0.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0007
306		-|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
307		-* 0：Running at frequency lower limit
308		-* 1：Stop
309		-* 2：Standby
310		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0008
311		-|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:196px" %)6.0kHz|(% style="width:64px" %)●|(% style="width:87px" %)0009
312		-|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000A
313		-|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000B
314		-|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
315		-* 0：Decelerate to stop
316		-* 1：Free stop
317		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000C
318		-|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
319		-* 0：No retentive
320		-* 1：retentive
321		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)000D
322		-|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
323		-* 0：Run when motor is running
324		-* 1：Keep run when power on
325		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000E
326		-|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
327		-* 0: 0-10V
328		-* 1: 4-20mA
329		-* 2: 0-20mA
330		-* 3: 0-5V
331		-* 4: 0.5-4.5V
332		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000F
333		-|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
334		-* 0: No Operation
335		-* 1: Restore to factory default setting (not including F2 parameters)
336		-* 2: Clear error records
337		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0100
338		-|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
339		-* 0: Invalid
340		-* 1: Valid
341		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0101
342		-|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0102
343		-|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0200
344		-|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0201
345		-|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0202
346		-|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0203
347		-|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
348		-* 0: Single Phase
349		-* 1: Three Phase
350		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0205
351		-|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:196px" %)80|(% style="width:64px" %)○|(% style="width:87px" %)0206
352		-|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:196px" %)130|(% style="width:64px" %)○|(% style="width:87px" %)0207
353		-|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:196px" %)4.0%|(% style="width:64px" %)○|(% style="width:87px" %)0400
354		-|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.00Hz|(% style="width:64px" %)●|(% style="width:87px" %)0401
355		-|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)0.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0402
356		-|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0403
357		-|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0404
358		-|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0405
359		-|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
360		-* 0: Invalid;
361		-* 1: Valid
362		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0406
363		-|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
364		-* 0: Valid;
365		-* 1: Invalid
366		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0407
367		-|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
368		-* 0: No function
369		-* 1: Forward running (FWD)
370		-* 2: Reverse running (REV)
371		-* 3: Three-wire operation control
372		-* 4: Forward point movement (FJOG)
373		-* 5: Reverse point movement (RJOG)
374		-* 6: Error Reset
375		-* 7: Terminal UP
376		-* 8: Terminal Down
377		-* 9: UP/DOWN Setting Clear
378		-* 10: External error input(Normally Open)
379		-* 11: PLC Status reset
380		-* 12: Multi stage speed terminal 1
381		-* 13: Multi stage speed terminal 2
382		-* 14: Reserved
383		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0500
384		-|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0501
385		-|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:196px" %)6|(% style="width:64px" %)●|(% style="width:87px" %)0502
386		-|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0503
387		-|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:196px" %)0.010s|(% style="width:64px" %)○|(% style="width:87px" %)0504
388		-|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
389		-* 0: Two-line mode 1
390		-* 1: Two-line mode 2
391		-* 2: Three-line mode 1
392		-* 3: Three-line mode 2
393		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0505
394		-|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:196px" %)0.50Hz|(% style="width:64px" %)○|(% style="width:87px" %)0506
395		-|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:196px" %)0.00V|(% style="width:64px" %)○|(% style="width:87px" %)0507
396		-|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)0508
397		-|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:196px" %)10.00V|(% style="width:64px" %)○|(% style="width:87px" %)0509
398		-|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)100.0%|(% style="width:64px" %)○|(% style="width:87px" %)050A
399		-|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:196px" %)0.10s|(% style="width:64px" %)○|(% style="width:87px" %)050B
400		-|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050C
401		-|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050D
402		-|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050E
403		-|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050F
404		-|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
405		-* 0: No function
406		-* 1: Forward running (FWD)
407		-* 2: Reverse running (REV)
408		-* 3: Three-wire operation control
409		-* 4: Forward point movement (FJOG)
410		-* 5: Reverse point movement (RJOG)
411		-* 6: Error Reset
412		-* 7: Terminal UP
413		-* 8: Terminal Down
414		-* 9: UP/DOWN Setting Clear
415		-* 10: External error input(Normally Open)
416		-* 11: PLC Status reset
417		-* 12: Multi stage speed terminal 1
418		-* 13: Multi stage speed terminal 2
419		-* 14: Reserved
420		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0510
421		-|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
422		-* 0: Low Level Valid
423		-* 1: High Level Valid
424		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0511
425		-|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
426		-* 0: No Output
427		-* 1: VFD Running
428		-* 2: Error Output(Output is valid only after VFD stops)
429		-* 3: Ready for Running
430		-* 4: Communication Setting
431		-* 5: User Defined Output
432		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0600
433		-|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0601
434		-|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0602
435		-|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
	263	+“◎”:the parameter is the actual detected and recorded value which can’t be modified；
	264	+
	265	+Note: the communication address is hexadecimal.
	266	+
	267	+
	268	+== 4.1 Functional parameter ==
	269	+
	270	+|Parameter|Name|Setting Range|Default|Property|Address
	271	+|F0.00|Reserved|Reserved|0|●|0000
	272	+|F0.01|Command source selection|0：Operation panel control（LED off）
	273	+1：Terminal control（LED on）
	274	+ 2：Communication LED (LED blinking）|0|●|0001
	275	+|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
	276	+ 1：Digital setting (retentive at power failure)
	277	+ 2：Keypad Knob
	278	+ 3：AI
	279	+ 4：Multi-stage speed
	280	+ 5：Simple PLC
	281	+ 6：Communication|2|●|0002
	282	+|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
	283	+|F0.04|Running direction selection|0：Forward
	284	+ 1：Reverse|0|○|0004
	285	+|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
	286	+|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
	287	+|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
	288	+|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
	289	+1：Stop
	290	+2：Standby|0|○|0008
	291	+|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
	292	+|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
	293	+|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
	294	+|F0.12|Stop Mode|0：Decelerate to stop
	295	+ 1：Free stop|0|○|000C
	296	+|F0.13|Retentive of digital setting frequency|0：No retentive
	297	+1：retentive|1|●|000D
	298	+|F0.14|Fan operating mode|0：Run when motor is running
	299	+ 1：Keep run when power on|0|○|000E
	300	+|F0.15|AI1 Input Option|(((
	301	+0：0-10V
	302	+
	303	+1：4-20mA
	304	+
	305	+2: 0-20mA
	306	+
	307	+3：0-5V
	308	+
	309	+4：0.5-4.5V
	310	+)))|0|○|000F
	311	+|F1.00|Default Setting Restoring|0：No Operation
	312	+ 1：Restore to factory default setting (not including F2 parameters)
	313	+ 2：Clear error records|0|●|0100
	314	+|F1.01|Parameters Lockup|0：Invalid
	315	+ 1：Valid|0|○|0101
	316	+|F1.02|User Password|0～65000|0|○|0102
	317	+|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
	318	+|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
	319	+|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
	320	+|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
	321	+|F2.05|Type of Motor|(((
	322	+0：Single Phase
	323	+
	324	+1：Three Phase
	325	+)))|0|●|0205
	326	+|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
	327	+|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
	328	+|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
	329	+|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
	330	+|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
	331	+|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
	332	+|F4.04|The current of DC braking at stop|0～100%|0|○|0404
	333	+|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
	334	+|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
	335	+|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
	336	+|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
	337	+0: No function
	338	+
	339	+1: Forward running (FWD)
	340	+
	341	+2: Reverse running (REV)
	342	+
	343	+3: Three-wire operation control
	344	+
	345	+4: Forward point movement (FJOG)
	346	+
	347	+5: Reverse point movement (RJOG)
	348	+6:Error Reset
	349	+ 7:Terminal UP
	350	+ 8:Terminal Down
	351	+ 9:UP/DOWN Setting Clear
	352	+ 10:External error input(Normally Open)
	353	+ 11：PLC Status reset
	354	+ 12:Multi stage speed terminal 1
	355	+ 13: Multi stage speed terminal 2
	356	+ 14:Reserved
	357	+)))|1|●|0500
	358	+|F5.01|DI2 terminal function selection|2|●|0501
	359	+|F5.02|DI3 terminal function selection|6|●|0502
	360	+|F5.03|DI4 terminal function selection|0|●|0503
	361	+|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
	362	+|F5.05|Terminal Command Option|0: Two-line mode 1
	363	+1: Two-line mode 2
	364	+ 2: Three-line mode 1
	365	+3: Three-line mode 2|0|●|0505
	366	+|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
	367	+|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
	368	+|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
	369	+|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
	370	+|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
	371	+|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
	372	+|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
	373	+|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
	374	+|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
	375	+|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
	376	+|F5.16|AI Input Digital Functional Option|(((
	377	+0: No function
	378	+
	379	+1: Forward running (FWD)
	380	+
	381	+2: Reverse running (REV)
	382	+
	383	+3: Three-wire operation control
	384	+
	385	+4: Forward point movement (FJOG)
	386	+
	387	+5: Reverse point movement (RJOG)
	388	+6:Error Reset
	389	+ 7:Terminal UP
	390	+ 8:Terminal Down
	391	+ 9:UP/DOWN Setting Clear
	392	+ 10:External error input(Normally Open)
	393	+ 11：PLC Status reset
	394	+ 12:Multi stage speed terminal 1
	395	+ 13: Multi stage speed terminal 2
	396	+ 14:Reserved
	397	+)))|0|●|0510
	398	+|F5.17|AI Input Valid Level Option|(((
	399	+0：Low Level Valid
	400	+
	401	+1：High Level Valid
	402	+)))|1|○|0511
	403	+|F6.00|Relay Output Option|0：No Output
	404	+ 1：VFD Running
	405	+ 2：Error Output(Output is valid only after VFD stops)
	406	+ 3：Ready for Running
	407	+ 4：Communication Setting
	408	+ 5: User Defined Output|0|○|0600
	409	+|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
	410	+|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
	411	+|F6.03|(((
436	436	User defined output
437	437
438	438	Variability option（EX）
439		-)))|(% style="width:428px" %)(((
440		-* 0: Running Frequency
441		-* 1: Set Frequency
442		-* 2: Bus Voltage
443		-* 3: Output Voltage
444		-* 4: Output Current
445		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0603
446		-|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
447		-* 0: Equal (EX==X1)
448		-* 1: Equal or greater than
449		-* 2: Equal or less than
450		-* 3: Interval comparison (X1≤EX≤X2)
451		-* 4: Units digit test (EX&X1=X2)
452		-
	415	+)))|0：Running Frequency
	416	+ 1：Set Frequency
	417	+ 2：Bus Voltage
	418	+ 3：Output Voltage
	419	+ 4：Output Current|0|○|0603
	420	+|F6.04|User defined comparison method|Units digit：comparison test method
	421	+0: Equal (EX==X1)
	422	+1: Equal or greater than
	423	+2: Equal or less than
	424	+3 Interval comparison (X1≤EX≤X2)
	425	+4:Units digit test (EX&X1=X2)
453	453	Tens digit: output method
454		-
455		-* 0: False value output
456		-* 1: Real value output
457		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0604
458		-|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0605
459		-|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
	427	+ 0: False value output
	428	+1: Real value output|0|○|0604
	429	+|F6.05|User defined output dead zone|0～65535|0|○|0605
	430	+|F6.06|(((
460	460	User-defined output
461	461
462	462	comparison value 1
463		-)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0606
464		-|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
	434	+)))|0～65535|0|○|0606
	435	+|F6.07|(((
465	465	User-defined output
466	466
467	467	comparison value 2
468		-)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0607
469		-|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
470		-* 0: Running Frequency（0～F0.05）
471		-* 1: Set Frequency（0～F0.05）
472		-* 2: Output Current（0～Double Rated Current of VFD）
473		-* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
474		-* 4: AI（0～10V）
475		-* 5: Bus Voltage（0～500.0/1000.0V）
476		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0608
477		-|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0609
478		-|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060A
479		-|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060B
480		-|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060C
481		-|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060D
482		-|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0700
483		-|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
484		-* 0: Valid only at keypad control mode
485		-* 1: Valid at all control modes
486		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0701
487		-|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
488		-* Bit0: Running Frequency(Hz)
489		-* Bit1: Set Frequency(Hz)
490		-* Bit2: Bus Voltage(V)
491		-* Bit3: Output Voltage(V)
492		-* Bit4: Output Current(A)
493		-* Bit5: DI Input Status
494		-* Bit6: DO Output Status
495		-* Bit7: Keypad Knob Voltage(V)
496		-* Bit8: AIVoltage(V)
497		-* Bit9: Load Speed
498		-* Bit10: PID Set Value
499		-* Bit11: PID Feedback Value
500		-* Bit12: PLC Stage
501		-* Bit13: Feedback Frequency（Unit：0.1Hz)
502		-* Bit14: Communication Set Value
503		-* Bit15: Main Frequency Source X
504		-)))|(% style="width:196px" %)0x1F|(% style="width:64px" %)○|(% style="width:87px" %)0702
505		-|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:196px" %)0x06|(% style="width:64px" %)○|(% style="width:87px" %)0703
506		-|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:196px" %)3.000|(% style="width:64px" %)○|(% style="width:87px" %)0704
507		-|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:196px" %)-|(% style="width:64px" %)◎|(% style="width:87px" %)0705
508		-|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)2.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0800
509		-|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0801
510		-|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0802
511		-|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0803
512		-|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
513		-* 0: valid
514		-* 1: invalid
515		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0804
516		-|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0805
517		-|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
518		-* 0：Invalid
519		-* 1：Valid
520		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0806
521		-|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
522		-* 0: Invalid
523		-* 1: Valid
524		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0807
525		-|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C00
526		-|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
527		-* 0: 4800bPS
528		-* 1: 9600bPS
529		-* 2: 19200bPS
530		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C01
531		-|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
532		-* 0: No check, data format (8.N.1)
533		-* 1: Odd Parity check, data format (8.O.1)
534		-* 2: Even parity check, data format (8.E.1)
535		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0C02
536		-|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:196px" %)2|(% style="width:64px" %)○|(% style="width:87px" %)0C03
537		-|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0C04
538		-|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D00
539		-|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D01
540		-|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D02
541		-|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D03
542		-|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
543		-* 0: Stop after the AC Drive runs one cycle
544		-* 1: Keep final values after the AC Drive runs one cycle
545		-* 2: Repeat after the AC Drive runs one cycle
546		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D04
547		-|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
548		-Tens Digit：(((
549		-* 0: Invalid
550		-* 1: Valid
551		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D05
552		-|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D06
553		-|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D07
554		-|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D08
555		-|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D09
556		-|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0A
557		-|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0B
558		-|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0C
559		-|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0D
560		-|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
561		-* 0: s（second）
562		-* 1: h（hour）
563		-* 2: min（minute）
564		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0E
565		-|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
566		-* 0: Set by FD.00
567		-* 1: AI
568		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0F
	439	+)))|0～65535|0|○|0607
	440	+|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
	441	+ 1：Set Frequency（0～F0.05）
	442	+ 2：Output Current（0～Double Rated Current of VFD）
	443	+ 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
	444	+ 4：AI（0～10V）
	445	+ 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
	446	+|F6.09|AO2 Output Option|0|○|0609
	447	+|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
	448	+|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
	449	+|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
	450	+|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
	451	+|F7.00|Reserved|Reserved|0|○|0700
	452	+|F7.01|STOP Button Function|0：Valid only at keypad control mode
	453	+ 1：Valid at all control modes|1|○|0701
	454	+|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
	455	+Bit0：Running Frequency(Hz)
	456	+ Bit1：Set Frequency(Hz)
	457	+ Bit2：Bus Voltage(V)
	458	+ Bit3：Output Voltage(V)
	459	+ Bit4：Output Current(A)
	460	+ Bit5：DI Input Status
	461	+ Bit6：DO Output Status
	462	+ Bit7：Keypad Knob Voltage(V)
569	569
570		-== Monitoring Parameters ==
	464	+Bit8：AIVoltage(V)
	465	+ Bit9：Load Speed
	466	+ Bit10：PID Set Value
	467	+ Bit11：PID Feedback Value
	468	+ Bit12：PLC Stage
	469	+ Bit13：Feedback Frequency（Unit：0.1Hz)
571	571
	471	+Bit14：Communication Set Value
	472	+ Bit15：Main Frequency Source X
	473	+)))|0x1F|○|0702
	474	+|F7.03|LED display parameters at stop status|0x06|○|0703
	475	+|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
	476	+|F7.05|Software Version|-|-|◎|0705
	477	+|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
	478	+|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
	479	+|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
	480	+|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
	481	+|F8.04|Reverse control|(((
	482	+0：valid
	483	+
	484	+1：invalid
	485	+)))|0|○|0804
	486	+|F8.05|Reserved|0|0|●|0805
	487	+|F8.06|Startup Protection Option|0：Invalid
	488	+ 1：Valid|0|○|0806
	489	+|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
	490	+|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
	491	+|FC.01|Baud Rate|0：4800bPS
	492	+ 1：9600bPS
	493	+ 2：19200bPS|1|○|0C01
	494	+|FC.02|Data format|0：No check, data format (8.N.1)
	495	+ 1：Odd Parity check, data format (8.O.1)
	496	+ 2：Even parity check, data format (8.E.1)|0|○|0C02
	497	+|FC.03|Respond Delay|0ms～20ms|2|○|0C03
	498	+|FC.04|Reserved|0|0|●|0C04
	499	+|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
	500	+|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
	501	+|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
	502	+|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
	503	+|FD.04|Simple PLC running mode|(((
	504	+0:Stop after the AC Drive runs one cycle
	505	+
	506	+1:Keep final values after the AC Drive runs one cycle
	507	+
	508	+2:Repeat after the AC Drive runs one cycle
	509	+)))|0|○|0D04
	510	+|FD.05|Simple PLC retentive option|Units Digit：Reserved
	511	+ Tens Digit：
	512	+ 0：Invalid
	513	+ 1：Valid|0|○|0D05
	514	+|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
	515	+|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
	516	+|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
	517	+|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
	518	+|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
	519	+|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
	520	+|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
	521	+|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
	522	+|FD.14|Time unit of simple PLC running|0：s（second）
	523	+ 1：h（hour）
	524	+ 2：min（minute）|0|○|0D0E
	525	+|FD.15|The source of multistage speed 0|(((
	526	+0：Set by FD.00
	527	+
	528	+1：AI
	529	+)))|0|○|0D0F
	530	+
	531	+== 4.2 Monitoring Parameters ==
	532	+
572	572	|Parameter|Name|Minimum Unit|Priority|Address
573	573	|D0.00|Running Frequency(Hz)|0.01Hz|◎|D000
574	574	|D0.01|Set Frequency(Hz)|0.01Hz|◎|D001
...	...	@@ -584,7 +584,7 @@
584	584	|D0.13|PLC Stage|1|◎|D013
585	585	|D0.14|Feedback Speed(Unit0.1Hz)|0.1Hz|◎|D014
586	586
587		-== Error Records ==
	548	+== 4.3 Error Records ==
588	588
589	589	|Parameter|Name|Range and Description|Priority|Address
590	590	|E0.00|Latest error type|No Error:0
...	...	@@ -614,11 +614,11 @@
614	614	|E1.04|Input terminals status at former error|0-63|●|　E104
615	615	|E1.05|IGBT temperature at former error|0-65535|●|　E105
616	616
617		-= 7 Communication Protocol =
	578	+= Chapter5 Communication Protocol =
618	618
619	619	VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
620	620
621		-== Communication Control Address ==
	582	+== 5.1 Communication Control Address ==
622	622
623	623	|Function|Address|Description|Remarks|Characteristic
624	624	|Communication Set Value|1000H|-10000～10000（with ± sign）|F0.05*（±100.00%）|R/W
...	...	@@ -669,7 +669,7 @@
669	669
670	670	Sheet 5-1-1 Control Command Addresses
671	671
672		-== EEPROM Addresses Introduction ==
	633	+== 5.2 EEPROM Addresses Introduction ==
673	673
674	674	The addresses listed in the sheet above is the way of writing RAM. The RAM stores the data after power-off and does not save it. In the communication mode, for the write command "06H", if the parameter needs to be stored after power-off, the method of writing EEPROM should be used. The original "0" of the most significant bit of the RAM address is changed to "F", which is converted into the corresponding EEPROM address, for example: "0XXX" is changed to "FXXX"
675	675
...	...	@@ -681,9 +681,9 @@
681	681
682	682	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
683	683
684		-= 8 Troubleshooting & countermeasures =
	645	+= Chapter 6 Troubleshooting & countermeasures =
685	685
686		-== Faults and solutions ==
	647	+== 6.1 Faults and solutions ==
687	687
688	688	|Fault code|Fault type|Reason|Solution
689	689	|Err02|Overcurrent during acceleration|(((
...	...	@@ -836,8 +836,9 @@
836	836
837	837	Table 6-1-1 Faults and solutions
838	838
839		-== Common faults and solutions ==
840	840
	801	+== 6.2 Common faults and solutions ==
	802	+
841	841	|**SN**|**Fault**|**Possible causes**|**Solutions**
842	842	|1|No display at power-on state|(((
843	843	~1. The input power of AC Drive is abnormal.
...	...	@@ -919,3 +919,10 @@
919	919	)))
920	920
921	921	Table 6-2-1 Common faults and solutions
	884	+
	885	+
	886	+(((
	887	+
	888	+)))
	889	+
	890	+