Changes for page 1 VM Series Manual V1.2

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,8 +6,3 @@
1		-(% class="box infomessage" %)
2		-(((
3		-**This is the old version VM series. S/N on the inverter starts from "X0".**
4		-)))
5		-
6	6	= 1 Preface =
7	7
8	8	Thank you for choosing WECON VM Series AC Drive.
...	...	@@ -13,6 +13,7 @@
13	13
14	14	Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
15	15
	11	+
16	16	= 2 Safety precautions =
17	17
18	18	**■ Warning sign**
...	...	@@ -88,21 +88,21 @@
88	88	|=(% colspan="2" %)**Item**|=**Specifications**
89	89	|(% rowspan="7" %)Control features|Control mode|V/F control
90	90	|Startup torque|0.5Hz/100%
91		-|Speed range|1: 50
	87	+|Speed range|1：50
92	92	|Speed stability accuracy|±1%
93		-|Carrier frequency|1kHz~~6kHz；
	89	+|Carrier frequency|1kHz ～ 6kHz；
94	94	|Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
95		-|Torque boost|0.0%~~30.0%
96		-|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
97		-|Input frequency range|50/60Hz；fluctuation range: ±5%
	91	+|Torque boost|0.0% ～ 30.0%
	92	+|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
	93	+|Input frequency range|50/60Hz；fluctuation range :±5%
98	98	|Output voltage range|0-input voltage; the error is less than 5%
99		-|Output frequency range|0~~400Hz
	95	+|Output frequency range|0-400Hz
100	100	|(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
101	101	|Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
102	102	|DC braking|(((
103		-Braking time: 0.0s~~50.0s;
	99	+Braking time: 0.0s ～ 50.0s;
104	104
105		-Braking action current value: 0.0%~~100.0%
	101	+Braking action current value: 0.0% ～ 100.0%
106	106	)))
107	107	|Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
108	108	|Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
...	...	@@ -110,7 +110,7 @@
110	110	|Parameters locking function|It can lock the parameters to prevent malfunction.
111	111	|(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
112	112	|Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
113		-|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
	109	+|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
114	114	|Humidity|≤95%RH, without condensing
115	115	|Vibration|Less than 5.9m/s2 (0.6g)
116	116	|Storage temperature|-25℃～+60℃
...	...	@@ -119,12 +119,9 @@
119	119
120	120	== Product nameplate ==
121	121
122		-(% style="text-align:center" %)
123		-(((
124		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
125		-[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
126		-)))
	118	+[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
127	127
	120	+Figure 1-2-1 Product nameplate
128	128
129	129	== Model description ==
130	130
...	...	@@ -132,10 +132,10 @@
132	132
133	133	①  ② ③  ④
134	134
135		-|=**Field**|=**No.**|=**Identification**|=**Description**
	128	+|**Field**|**No.**|**Identification**|**Description**
136	136	|Product series|①|Product series|VM series
137		-|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
138		-|The input power|③|Power phase identification|S: single; T: three-phase
	130	+|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
	131	+|The input power|③|Power phase identification|S: single ； T: three-phase
139	139	|Rated power|④|Power range|1R5-1.5kW，R is the decimal point
140	140
141	141	Table 1-3-1 VM series model field comment
...	...	@@ -142,24 +142,21 @@
142	142
143	143	== Product model ==
144	144
145		-|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
146		-|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
147		-|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
148		-|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
149		-|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
150		-|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
151		-|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
152		-|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
153		-|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
154		-|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
155		-|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
	138	+|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
	139	+|kW|kVA|A|A|kW|HP
	140	+|VM-2SR75|0.75|1.5|8.2|4|0.75|1
	141	+|VM-2S1R5|1.5|3|14.2|7|1.5|2
	142	+|VM-2S2R2|2.2|4|23|9.6|2.2|3
	143	+|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
	144	+|VM-4T004|4|5.9|10.5|9|4/|5.5
	145	+|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
	146	+|VM-4T7R5|7.5|11|20.5|17|7.5|10
	147	+|VM-4T011*|11|17|26|25|11|15
	148	+|VM-4T015*|15|21|35|32|15|20
156	156
157	157	Table 1-4-1 Product model table
158	158
159		-(% class="box infomessage" %)
160		-(((
161	161	*:In development
162		-)))
163	163
164	164	= 4 Installation =
165	165
...	...	@@ -168,49 +168,42 @@
168	168	(% class="wikigeneratedid" %)
169	169	unit: mm
170	170
171		-(% style="text-align:center" %)
172		-(((
173		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
174		-[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
175		-)))
	161	+[[image:1624240220324-243.png]]
176	176
	163	+Figure 2-1-1 Outline dimension diagram
177	177
178		-(% style="width:1271.22px" %)
179		-|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
180		-|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
181		-|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
182		-|=(% style="width: 267px;" %)VM-2S1R5
183		-|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
184		-|=(% style="width: 267px;" %)VM-4T2R2
185		-|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
186		-|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
187		-|=(% style="width: 267px;" %)VM-4T7R5
188		-|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
189		-|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
	165	+|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
	166	+|H|W|D|H1|W1|d
	167	+|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
	168	+|VM-2S1R5
	169	+|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
	170	+|VM-4T2R2
	171	+|VM-4T004|196|95|132|179|79|5.5
	172	+|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
	173	+|VM-4T7R5
	174	+|VM-4T011|-|-|-|-|-|-
	175	+|VM-4T015|-|-|-|-|-|-
190	190
191	191	Table 2-1-1 outline dimension
192	192
193	193	== Terminal connection ==
194	194
195		-(% style="text-align:center" %)
196		-(((
197		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
198		-[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
199		-)))
	181	+[[image:1624240272484-903.png]]
200	200
	183	+Figure 2-2-1 Terminal connection
201	201
202	202	**Main circuit connection**
203	203
204		-|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
205		-|=R、S、T|Power supply input terminals|Connect to the AC power supply
206		-|=U、V、W|AC drive output terminals|Connect the three-phase motor.
207		-|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
	187	+|**Terminal mark**|**Name**|**Description**
	188	+|R、S、T|Power supply input terminals|Connect to the AC power supply
	189	+|U、V、W|AC drive output terminals|Connect the three-phase motor.
	190	+|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
208	208
209	209	Table 2-2-1 Main circuit terminals and function
210	210
211	211	**Control circuit connection**
212	212
213		-|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
	196	+|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
214	214	|(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
215	215	Provide +10V power supply to external unit.
216	216
...	...	@@ -234,339 +234,310 @@
234	234
235	235	You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
236	236
237		-(% style="text-align:center" %)
238		-(((
239		-(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
240		-[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
241		-)))
	220	+[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
242	242
	222	+Figure 3-1-1 Keypad diagram
243	243
244	244	== Description of indicators and keys ==
245	245
246		-|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
247		-|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
248		-* RUN: ON/Running; OFF/Stop.
249		-* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
250		-* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
251		-* ALARM: Blinking /Fault state.
	226	+|**Item**|**Name**|**Function**
	227	+|Indicator|Status|(((
	228	+* RUN： ON/Running；OFF/Stop.
	229	+* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
	230	+* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
	231	+* ALARM：Blinking /Fault state.
252	252	)))
253		-|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
254		-PRG (Programming)
255		-)))|(% style="width:865px" %)Enter or exit the first menu.
256		-|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
257		-|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
258		-|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
259		-|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
260		-|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
	233	+|(% rowspan="6" %)keys|(((
	234	+PRG
	235	+
	236	+(Programming)
	237	+)))|Enter or exit the first menu.
	238	+|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
	239	+|△（Increment）|Increase date or function code.
	240	+|▽（Decrement）|Decrease data or function code.
	241	+|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
	242	+|RUN/STOP|(((
261	261	Control drive start and stop in keypad control mode.
262	262
263	263	Perform the reset operation when it is in the fault state.
264	264	)))
265		-|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
	247	+|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
266	266
267	267	Table 3-2-1 Description of Indicators and key
268	268
269	269	= 6 Parameter function =
270	270
271		-* “○”: the parameter can be modified in both standby and operating state；
272		-* “●”: the parameter can’t be modified in operating state；
273		-* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
	253	+“○”: the parameter can be modified in both standby and operating state；
274	274
275		-(% class="box infomessage" %)
276		-(((
277		-**Note: **the communication address is hexadecimal.
278		-)))
	255	+“●”: the parameter can’t be modified in operating state；
279	279
	257	+“◎”:the parameter is the actual detected and recorded value which can’t be modified；
	258	+
	259	+Note: the communication address is hexadecimal.
	260	+
280	280	== Functional parameter ==
281	281
282		-|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 196px;" %)Default|=(% style="width: 64px;" %)Property|=(% style="width: 87px;" %)Address
283		-|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0000
284		-|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
285		-* 0：Operation panel control（LED off）
286		-* 1：Terminal control（LED on）
287		-* 2：Communication LED (LED blinking）
288		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0001
289		-|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
290		-* 0：Digital setting (non-retentive at power failure)
291		-* 1：Digital setting (retentive at power failure)
292		-* 2：Keypad Knob
293		-* 3：AI
294		-* 4：Multi-stage speed
295		-* 5：Simple PLC
296		-* 6：Communication
297		-)))|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0002
298		-|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0003
299		-|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
300		-* 0：Forward
301		-* 1：Reverse
302		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0004
303		-|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)●|(% style="width:87px" %)0005
304		-|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:196px" %)50.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0006
305		-|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:196px" %)0.0Hz|(% style="width:64px" %)○|(% style="width:87px" %)0007
306		-|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
307		-* 0：Running at frequency lower limit
308		-* 1：Stop
309		-* 2：Standby
310		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0008
311		-|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:196px" %)6.0kHz|(% style="width:64px" %)●|(% style="width:87px" %)0009
312		-|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000A
313		-|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)000B
314		-|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
315		-* 0：Decelerate to stop
316		-* 1：Free stop
317		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000C
318		-|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
319		-* 0：No retentive
320		-* 1：retentive
321		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)000D
322		-|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
323		-* 0：Run when motor is running
324		-* 1：Keep run when power on
325		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000E
326		-|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
327		-* 0: 0-10V
328		-* 1: 4-20mA
329		-* 2: 0-20mA
330		-* 3: 0-5V
331		-* 4: 0.5-4.5V
332		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)000F
333		-|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
334		-* 0: No Operation
335		-* 1: Restore to factory default setting (not including F2 parameters)
336		-* 2: Clear error records
337		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0100
338		-|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
339		-* 0: Invalid
340		-* 1: Valid
341		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0101
342		-|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0102
343		-|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0200
344		-|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0201
345		-|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0202
346		-|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:196px" %)Determined by Drive Model|(% style="width:64px" %)●|(% style="width:87px" %)0203
347		-|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
348		-* 0: Single Phase
349		-* 1: Three Phase
350		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0205
351		-|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:196px" %)80|(% style="width:64px" %)○|(% style="width:87px" %)0206
352		-|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:196px" %)130|(% style="width:64px" %)○|(% style="width:87px" %)0207
353		-|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:196px" %)4.0%|(% style="width:64px" %)○|(% style="width:87px" %)0400
354		-|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)50.00Hz|(% style="width:64px" %)●|(% style="width:87px" %)0401
355		-|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)0.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0402
356		-|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0403
357		-|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0404
358		-|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0405
359		-|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
360		-* 0: Invalid;
361		-* 1: Valid
362		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0406
363		-|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
364		-* 0: Valid;
365		-* 1: Invalid
366		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0407
367		-|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
368		-* 0: No function
369		-* 1: Forward running (FWD)
370		-* 2: Reverse running (REV)
371		-* 3: Three-wire operation control
372		-* 4: Forward point movement (FJOG)
373		-* 5: Reverse point movement (RJOG)
374		-* 6: Error Reset
375		-* 7: Terminal UP
376		-* 8: Terminal Down
377		-* 9: UP/DOWN Setting Clear
378		-* 10: External error input(Normally Open)
379		-* 11: PLC Status reset
380		-* 12: Multi stage speed terminal 1
381		-* 13: Multi stage speed terminal 2
382		-* 14: Reserved
383		-)))|(% style="width:196px" %)1|(% style="width:64px" %)●|(% style="width:87px" %)0500
384		-|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:196px" %)2|(% style="width:64px" %)●|(% style="width:87px" %)0501
385		-|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:196px" %)6|(% style="width:64px" %)●|(% style="width:87px" %)0502
386		-|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0503
387		-|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:196px" %)0.010s|(% style="width:64px" %)○|(% style="width:87px" %)0504
388		-|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
389		-* 0: Two-line mode 1
390		-* 1: Two-line mode 2
391		-* 2: Three-line mode 1
392		-* 3: Three-line mode 2
393		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0505
394		-|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:196px" %)0.50Hz|(% style="width:64px" %)○|(% style="width:87px" %)0506
395		-|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:196px" %)0.00V|(% style="width:64px" %)○|(% style="width:87px" %)0507
396		-|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)0508
397		-|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:196px" %)10.00V|(% style="width:64px" %)○|(% style="width:87px" %)0509
398		-|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)100.0%|(% style="width:64px" %)○|(% style="width:87px" %)050A
399		-|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:196px" %)0.10s|(% style="width:64px" %)○|(% style="width:87px" %)050B
400		-|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050C
401		-|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050D
402		-|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050E
403		-|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)050F
404		-|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
405		-* 0: No function
406		-* 1: Forward running (FWD)
407		-* 2: Reverse running (REV)
408		-* 3: Three-wire operation control
409		-* 4: Forward point movement (FJOG)
410		-* 5: Reverse point movement (RJOG)
411		-* 6: Error Reset
412		-* 7: Terminal UP
413		-* 8: Terminal Down
414		-* 9: UP/DOWN Setting Clear
415		-* 10: External error input(Normally Open)
416		-* 11: PLC Status reset
417		-* 12: Multi stage speed terminal 1
418		-* 13: Multi stage speed terminal 2
419		-* 14: Reserved
420		-)))|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0510
421		-|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
422		-* 0: Low Level Valid
423		-* 1: High Level Valid
424		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0511
425		-|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
426		-* 0: No Output
427		-* 1: VFD Running
428		-* 2: Error Output(Output is valid only after VFD stops)
429		-* 3: Ready for Running
430		-* 4: Communication Setting
431		-* 5: User Defined Output
432		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0600
433		-|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0601
434		-|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0602
435		-|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
	263	+|Parameter|Name|Setting Range|Default|Property|Address
	264	+|F0.00|Reserved|Reserved|0|●|0000
	265	+|F0.01|Command source selection|0：Operation panel control（LED off）
	266	+1：Terminal control（LED on）
	267	+ 2：Communication LED (LED blinking）|0|●|0001
	268	+|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
	269	+ 1：Digital setting (retentive at power failure)
	270	+ 2：Keypad Knob
	271	+ 3：AI
	272	+ 4：Multi-stage speed
	273	+ 5：Simple PLC
	274	+ 6：Communication|2|●|0002
	275	+|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
	276	+|F0.04|Running direction selection|0：Forward
	277	+ 1：Reverse|0|○|0004
	278	+|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
	279	+|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
	280	+|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
	281	+|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
	282	+1：Stop
	283	+2：Standby|0|○|0008
	284	+|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
	285	+|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
	286	+|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
	287	+|F0.12|Stop Mode|0：Decelerate to stop
	288	+ 1：Free stop|0|○|000C
	289	+|F0.13|Retentive of digital setting frequency|0：No retentive
	290	+1：retentive|1|●|000D
	291	+|F0.14|Fan operating mode|0：Run when motor is running
	292	+ 1：Keep run when power on|0|○|000E
	293	+|F0.15|AI1 Input Option|(((
	294	+0：0-10V
	295	+
	296	+1：4-20mA
	297	+
	298	+2: 0-20mA
	299	+
	300	+3：0-5V
	301	+
	302	+4：0.5-4.5V
	303	+)))|0|○|000F
	304	+|F1.00|Default Setting Restoring|0：No Operation
	305	+ 1：Restore to factory default setting (not including F2 parameters)
	306	+ 2：Clear error records|0|●|0100
	307	+|F1.01|Parameters Lockup|0：Invalid
	308	+ 1：Valid|0|○|0101
	309	+|F1.02|User Password|0～65000|0|○|0102
	310	+|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
	311	+|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
	312	+|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
	313	+|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
	314	+|F2.05|Type of Motor|(((
	315	+0：Single Phase
	316	+
	317	+1：Three Phase
	318	+)))|0|●|0205
	319	+|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
	320	+|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
	321	+|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
	322	+|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
	323	+|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
	324	+|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
	325	+|F4.04|The current of DC braking at stop|0～100%|0|○|0404
	326	+|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
	327	+|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
	328	+|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
	329	+|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
	330	+0: No function
	331	+
	332	+1: Forward running (FWD)
	333	+
	334	+2: Reverse running (REV)
	335	+
	336	+3: Three-wire operation control
	337	+
	338	+4: Forward point movement (FJOG)
	339	+
	340	+5: Reverse point movement (RJOG)
	341	+6:Error Reset
	342	+ 7:Terminal UP
	343	+ 8:Terminal Down
	344	+ 9:UP/DOWN Setting Clear
	345	+ 10:External error input(Normally Open)
	346	+ 11：PLC Status reset
	347	+ 12:Multi stage speed terminal 1
	348	+ 13: Multi stage speed terminal 2
	349	+ 14:Reserved
	350	+)))|1|●|0500
	351	+|F5.01|DI2 terminal function selection|2|●|0501
	352	+|F5.02|DI3 terminal function selection|6|●|0502
	353	+|F5.03|DI4 terminal function selection|0|●|0503
	354	+|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
	355	+|F5.05|Terminal Command Option|0: Two-line mode 1
	356	+1: Two-line mode 2
	357	+ 2: Three-line mode 1
	358	+3: Three-line mode 2|0|●|0505
	359	+|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
	360	+|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
	361	+|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
	362	+|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
	363	+|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
	364	+|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
	365	+|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
	366	+|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
	367	+|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
	368	+|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
	369	+|F5.16|AI Input Digital Functional Option|(((
	370	+0: No function
	371	+
	372	+1: Forward running (FWD)
	373	+
	374	+2: Reverse running (REV)
	375	+
	376	+3: Three-wire operation control
	377	+
	378	+4: Forward point movement (FJOG)
	379	+
	380	+5: Reverse point movement (RJOG)
	381	+6:Error Reset
	382	+ 7:Terminal UP
	383	+ 8:Terminal Down
	384	+ 9:UP/DOWN Setting Clear
	385	+ 10:External error input(Normally Open)
	386	+ 11：PLC Status reset
	387	+ 12:Multi stage speed terminal 1
	388	+ 13: Multi stage speed terminal 2
	389	+ 14:Reserved
	390	+)))|0|●|0510
	391	+|F5.17|AI Input Valid Level Option|(((
	392	+0：Low Level Valid
	393	+
	394	+1：High Level Valid
	395	+)))|1|○|0511
	396	+|F6.00|Relay Output Option|0：No Output
	397	+ 1：VFD Running
	398	+ 2：Error Output(Output is valid only after VFD stops)
	399	+ 3：Ready for Running
	400	+ 4：Communication Setting
	401	+ 5: User Defined Output|0|○|0600
	402	+|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
	403	+|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
	404	+|F6.03|(((
436	436	User defined output
437	437
438	438	Variability option（EX）
439		-)))|(% style="width:428px" %)(((
440		-* 0: Running Frequency
441		-* 1: Set Frequency
442		-* 2: Bus Voltage
443		-* 3: Output Voltage
444		-* 4: Output Current
445		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0603
446		-|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
447		-* 0: Equal (EX==X1)
448		-* 1: Equal or greater than
449		-* 2: Equal or less than
450		-* 3: Interval comparison (X1≤EX≤X2)
451		-* 4: Units digit test (EX&X1=X2)
452		-
	408	+)))|0：Running Frequency
	409	+ 1：Set Frequency
	410	+ 2：Bus Voltage
	411	+ 3：Output Voltage
	412	+ 4：Output Current|0|○|0603
	413	+|F6.04|User defined comparison method|Units digit：comparison test method
	414	+0: Equal (EX==X1)
	415	+1: Equal or greater than
	416	+2: Equal or less than
	417	+3 Interval comparison (X1≤EX≤X2)
	418	+4:Units digit test (EX&X1=X2)
453	453	Tens digit: output method
454		-
455		-* 0: False value output
456		-* 1: Real value output
457		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0604
458		-|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0605
459		-|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
	420	+ 0: False value output
	421	+1: Real value output|0|○|0604
	422	+|F6.05|User defined output dead zone|0～65535|0|○|0605
	423	+|F6.06|(((
460	460	User-defined output
461	461
462	462	comparison value 1
463		-)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0606
464		-|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
	427	+)))|0～65535|0|○|0606
	428	+|F6.07|(((
465	465	User-defined output
466	466
467	467	comparison value 2
468		-)))|(% style="width:428px" %)0～65535|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0607
469		-|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
470		-* 0: Running Frequency（0～F0.05）
471		-* 1: Set Frequency（0～F0.05）
472		-* 2: Output Current（0～Double Rated Current of VFD）
473		-* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
474		-* 4: AI（0～10V）
475		-* 5: Bus Voltage（0～500.0/1000.0V）
476		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0608
477		-|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0609
478		-|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060A
479		-|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060B
480		-|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:196px" %)0.0%|(% style="width:64px" %)○|(% style="width:87px" %)060C
481		-|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:196px" %)1.00|(% style="width:64px" %)○|(% style="width:87px" %)060D
482		-|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0700
483		-|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
484		-* 0: Valid only at keypad control mode
485		-* 1: Valid at all control modes
486		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0701
487		-|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
488		-* Bit0: Running Frequency(Hz)
489		-* Bit1: Set Frequency(Hz)
490		-* Bit2: Bus Voltage(V)
491		-* Bit3: Output Voltage(V)
492		-* Bit4: Output Current(A)
493		-* Bit5: DI Input Status
494		-* Bit6: DO Output Status
495		-* Bit7: Keypad Knob Voltage(V)
496		-* Bit8: AIVoltage(V)
497		-* Bit9: Load Speed
498		-* Bit10: PID Set Value
499		-* Bit11: PID Feedback Value
500		-* Bit12: PLC Stage
501		-* Bit13: Feedback Frequency（Unit：0.1Hz)
502		-* Bit14: Communication Set Value
503		-* Bit15: Main Frequency Source X
504		-)))|(% style="width:196px" %)0x1F|(% style="width:64px" %)○|(% style="width:87px" %)0702
505		-|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:196px" %)0x06|(% style="width:64px" %)○|(% style="width:87px" %)0703
506		-|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:196px" %)3.000|(% style="width:64px" %)○|(% style="width:87px" %)0704
507		-|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:196px" %)-|(% style="width:64px" %)◎|(% style="width:87px" %)0705
508		-|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:196px" %)2.00Hz|(% style="width:64px" %)○|(% style="width:87px" %)0800
509		-|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0801
510		-|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)10.0s|(% style="width:64px" %)○|(% style="width:87px" %)0802
511		-|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:196px" %)0.0s|(% style="width:64px" %)○|(% style="width:87px" %)0803
512		-|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
513		-* 0: valid
514		-* 1: invalid
515		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0804
516		-|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0805
517		-|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
518		-* 0：Invalid
519		-* 1：Valid
520		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0806
521		-|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
522		-* 0: Invalid
523		-* 1: Valid
524		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0807
525		-|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C00
526		-|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
527		-* 0: 4800bPS
528		-* 1: 9600bPS
529		-* 2: 19200bPS
530		-)))|(% style="width:196px" %)1|(% style="width:64px" %)○|(% style="width:87px" %)0C01
531		-|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
532		-* 0: No check, data format (8.N.1)
533		-* 1: Odd Parity check, data format (8.O.1)
534		-* 2: Even parity check, data format (8.E.1)
535		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0C02
536		-|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:196px" %)2|(% style="width:64px" %)○|(% style="width:87px" %)0C03
537		-|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:196px" %)0|(% style="width:64px" %)●|(% style="width:87px" %)0C04
538		-|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D00
539		-|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D01
540		-|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D02
541		-|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:196px" %)0.00%|(% style="width:64px" %)○|(% style="width:87px" %)0D03
542		-|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
543		-* 0: Stop after the AC Drive runs one cycle
544		-* 1: Keep final values after the AC Drive runs one cycle
545		-* 2: Repeat after the AC Drive runs one cycle
546		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D04
547		-|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
548		-Tens Digit：(((
549		-* 0: Invalid
550		-* 1: Valid
551		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D05
552		-|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D06
553		-|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D07
554		-|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D08
555		-|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D09
556		-|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0A
557		-|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0B
558		-|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:196px" %)0.0s(h)|(% style="width:64px" %)○|(% style="width:87px" %)0D0C
559		-|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0D
560		-|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
561		-* 0: s（second）
562		-* 1: h（hour）
563		-* 2: min（minute）
564		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0E
565		-|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
566		-* 0: Set by FD.00
567		-* 1: AI
568		-)))|(% style="width:196px" %)0|(% style="width:64px" %)○|(% style="width:87px" %)0D0F
	432	+)))|0～65535|0|○|0607
	433	+|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
	434	+ 1：Set Frequency（0～F0.05）
	435	+ 2：Output Current（0～Double Rated Current of VFD）
	436	+ 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
	437	+ 4：AI（0～10V）
	438	+ 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
	439	+|F6.09|AO2 Output Option|0|○|0609
	440	+|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
	441	+|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
	442	+|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
	443	+|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
	444	+|F7.00|Reserved|Reserved|0|○|0700
	445	+|F7.01|STOP Button Function|0：Valid only at keypad control mode
	446	+ 1：Valid at all control modes|1|○|0701
	447	+|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
	448	+Bit0：Running Frequency(Hz)
	449	+ Bit1：Set Frequency(Hz)
	450	+ Bit2：Bus Voltage(V)
	451	+ Bit3：Output Voltage(V)
	452	+ Bit4：Output Current(A)
	453	+ Bit5：DI Input Status
	454	+ Bit6：DO Output Status
	455	+ Bit7：Keypad Knob Voltage(V)
569	569
	457	+Bit8：AIVoltage(V)
	458	+ Bit9：Load Speed
	459	+ Bit10：PID Set Value
	460	+ Bit11：PID Feedback Value
	461	+ Bit12：PLC Stage
	462	+ Bit13：Feedback Frequency（Unit：0.1Hz)
	463	+
	464	+Bit14：Communication Set Value
	465	+ Bit15：Main Frequency Source X
	466	+)))|0x1F|○|0702
	467	+|F7.03|LED display parameters at stop status|0x06|○|0703
	468	+|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
	469	+|F7.05|Software Version|-|-|◎|0705
	470	+|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
	471	+|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
	472	+|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
	473	+|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
	474	+|F8.04|Reverse control|(((
	475	+0：valid
	476	+
	477	+1：invalid
	478	+)))|0|○|0804
	479	+|F8.05|Reserved|0|0|●|0805
	480	+|F8.06|Startup Protection Option|0：Invalid
	481	+ 1：Valid|0|○|0806
	482	+|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
	483	+|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
	484	+|FC.01|Baud Rate|0：4800bPS
	485	+ 1：9600bPS
	486	+ 2：19200bPS|1|○|0C01
	487	+|FC.02|Data format|0：No check, data format (8.N.1)
	488	+ 1：Odd Parity check, data format (8.O.1)
	489	+ 2：Even parity check, data format (8.E.1)|0|○|0C02
	490	+|FC.03|Respond Delay|0ms～20ms|2|○|0C03
	491	+|FC.04|Reserved|0|0|●|0C04
	492	+|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
	493	+|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
	494	+|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
	495	+|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
	496	+|FD.04|Simple PLC running mode|(((
	497	+0:Stop after the AC Drive runs one cycle
	498	+
	499	+1:Keep final values after the AC Drive runs one cycle
	500	+
	501	+2:Repeat after the AC Drive runs one cycle
	502	+)))|0|○|0D04
	503	+|FD.05|Simple PLC retentive option|Units Digit：Reserved
	504	+ Tens Digit：
	505	+ 0：Invalid
	506	+ 1：Valid|0|○|0D05
	507	+|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
	508	+|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
	509	+|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
	510	+|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
	511	+|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
	512	+|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
	513	+|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
	514	+|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
	515	+|FD.14|Time unit of simple PLC running|0：s（second）
	516	+ 1：h（hour）
	517	+ 2：min（minute）|0|○|0D0E
	518	+|FD.15|The source of multistage speed 0|(((
	519	+0：Set by FD.00
	520	+
	521	+1：AI
	522	+)))|0|○|0D0F
	523	+
570	570	== Monitoring Parameters ==
571	571
572	572	|Parameter|Name|Minimum Unit|Priority|Address
...	...	@@ -614,7 +614,7 @@
614	614	|E1.04|Input terminals status at former error|0-63|●|　E104
615	615	|E1.05|IGBT temperature at former error|0-65535|●|　E105
616	616
617		-= 7 Communication Protocol =
	571	+= 8 Communication Protocol =
618	618
619	619	VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
620	620
...	...	@@ -681,7 +681,7 @@
681	681
682	682	It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
683	683
684		-= 8 Troubleshooting & countermeasures =
	638	+= 9 Troubleshooting & countermeasures =
685	685
686	686	== Faults and solutions ==
687	687
...	...	@@ -919,3 +919,10 @@
919	919	)))
920	920
921	921	Table 6-2-1 Common faults and solutions
	876	+
	877	+
	878	+(((
	879	+
	880	+)))
	881	+
	882	+