Skip to Content

Changes for page 1 VM Series Manual V1.2

Last modified by Mora Zhou on 2023/12/28 10:44
From version 7.3
edited by Stone Wu
on 2022/09/20 09:32
Change comment: (Autosaved)
To version 5.1
edited by Stone Wu
on 2022/08/01 14:31
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +6,3 @@
1 -(% class="box infomessage" %)
2 -(((
3 -**This is the old version VM series. S/N on the inverter starts from "X0".**
4 -)))
5 -
6 6  = 1 Preface =
7 7  
8 8  Thank you for choosing WECON VM Series AC Drive.
... ... @@ -13,6 +13,7 @@
13 13  
14 14  Be sure to verify that the wiring is correct before powering on the product. Before starting the product, it is necessary to debug to ensure correct motor rotating direction.
15 15  
11 +
16 16  = 2 Safety precautions =
17 17  
18 18  **■ Warning sign**
... ... @@ -88,21 +88,21 @@
88 88  |=(% colspan="2" %)**Item**|=**Specifications**
89 89  |(% rowspan="7" %)Control features|Control mode|V/F control
90 90  |Startup torque|0.5Hz/100%
91 -|Speed range|1: 50
87 +|Speed range|1：50
92 92  |Speed stability accuracy|±1%
93 -|Carrier frequency|1kHz~~6kHz；
89 +|Carrier frequency|1kHz ～ 6kHz；
94 94  |Overload capacity|60s for 150% of the rated current, 1s for 180% of the rated current.
95 -|Torque boost|0.0%~~30.0%
96 -|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range: ±15%
97 -|Input frequency range|50/60Hz；fluctuation range: ±5%
91 +|Torque boost|0.0% ～ 30.0%
92 +|(% rowspan="4" %)Input and Output|Input voltage range|220V/380V; fluctuation range :±15%
93 +|Input frequency range|50/60Hz；fluctuation range :±5%
98 98  |Output voltage range|0-input voltage; the error is less than 5%
99 -|Output frequency range|0~~400Hz
95 +|Output frequency range|0-400Hz
100 100  |(% rowspan="5" %)Basic function|Running command source|Three command source：keypad; control terminals; serial communication port.
101 101  |Frequency source|such as digital setting, analog voltage setting, analog current setting, serial communication port setting.
102 102  |DC braking|(((
103 -Braking time: 0.0s~~50.0s;
99 +Braking time: 0.0s ～ 50.0s;
104 104  
105 -Braking action current value: 0.0%~~100.0%
101 +Braking action current value: 0.0% ～ 100.0%
106 106  )))
107 107  |Simple PLC/Multiple speeds|It implements up to 8 speeds via the simple PLC function or combination of DI terminal states.
108 108  |Protection mode|Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection and so on.
... ... @@ -110,7 +110,7 @@
110 110  |Parameters locking function|It can lock the parameters to prevent malfunction.
111 111  |(% rowspan="6" %)Environment|Installation location|Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt.
112 112  |Altitude|Lower than 1000m. When it is higher than 1000m, for every 100m, it needs to reduce power by 1%, and the maximum altitude is 3000m.
113 -|Ambient temperature|-10℃~~50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
109 +|Ambient temperature|-10℃～ 50℃. When it is higher than 40℃, for every 1℃, it needs to reduce power by 1%, and the maximum ambient temperature is 50℃
114 114  |Humidity|≤95%RH, without condensing
115 115  |Vibration|Less than 5.9m/s2 (0.6g)
116 116  |Storage temperature|-25℃～+60℃
... ... @@ -119,12 +119,9 @@
119 119  
120 120  == Product nameplate ==
121 121  
122 -(% style="text-align:center" %)
123 -(((
124 -(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
125 -[[Figure 1-2-1 Product nameplate>>image:WECON VM 英文 V01_html_5a52ff18546c8417.png||id="IWECONVMA082F16587A0V01_html_5a52ff18546c8417.png"]]
126 -)))
118 +[[image:WECON VM 英文 V01_html_5a52ff18546c8417.png]]
127 127  
120 +Figure 1-2-1 Product nameplate
128 128  
129 129  == Model description ==
130 130  
... ... @@ -132,10 +132,10 @@
132 132  
133 133  ①  ② ③  ④
134 134  
135 -|=**Field**|=**No.**|=**Identification**|=**Description**
128 +|**Field**|**No.**|**Identification**|**Description**
136 136  |Product series|①|Product series|VM series
137 -|Voltage grade|②|Voltage grade|2: 220VAC; 4: 380VAC
138 -|The input power|③|Power phase identification|S: single; T: three-phase
130 +|Voltage grade|②|Voltage grade|2：220VAC； 4：380VAC
131 +|The input power|③|Power phase identification|S: single ； T: three-phase
139 139  |Rated power|④|Power range|1R5-1.5kW，R is the decimal point
140 140  
141 141  Table 1-3-1 VM series model field comment
... ... @@ -142,24 +142,21 @@
142 142  
143 143  == Product model ==
144 144  
145 -|=(% rowspan="2" scope="row" %)AC Drive Model|=Rated power|=Power capacity|=Input current|=(% style="width: 173px;" %)Output current|=(% colspan="2" style="width: 199px;" %)Motor G/P
146 -|=kW|=kVA|=A|=(% style="width: 173px;" %)A|=(% style="width: 128px;" %)kW|=HP
147 -|=VM-2SR75|0.75|1.5|8.2|(% style="width:173px" %)4|(% style="width:128px" %)0.75|1
148 -|=VM-2S1R5|1.5|3|14.2|(% style="width:173px" %)7|(% style="width:128px" %)1.5|2
149 -|=VM-2S2R2|2.2|4|23|(% style="width:173px" %)9.6|(% style="width:128px" %)2.2|3
150 -|=VM-4T2R2|2.2|4|5.8|(% style="width:173px" %)5.1|(% style="width:128px" %)2.2|3
151 -|=VM-4T004|4|5.9|10.5|(% style="width:173px" %)9|(% style="width:128px" %)4/|5.5
152 -|=VM-4T5R5|5.5|8.9|14.6|(% style="width:173px" %)13|(% style="width:128px" %)5.5|7.5
153 -|=VM-4T7R5|7.5|11|20.5|(% style="width:173px" %)17|(% style="width:128px" %)7.5|10
154 -|=VM-4T011*|11|17|26|(% style="width:173px" %)25|(% style="width:128px" %)11|15
155 -|=VM-4T015*|15|21|35|(% style="width:173px" %)32|(% style="width:128px" %)15|20
138 +|(% rowspan="2" %)AC Drive Model|Rated power|Power capacity|Input current|Output current|(% colspan="2" %)Motor G/P
139 +|kW|kVA|A|A|kW|HP
140 +|VM-2SR75|0.75|1.5|8.2|4|0.75|1
141 +|VM-2S1R5|1.5|3|14.2|7|1.5|2
142 +|VM-2S2R2|2.2|4|23|9.6|2.2|3
143 +|VM-4T2R2|2.2|4|5.8|5.1|2.2|3
144 +|VM-4T004|4|5.9|10.5|9|4/|5.5
145 +|VM-4T5R5|5.5|8.9|14.6|13|5.5|7.5
146 +|VM-4T7R5|7.5|11|20.5|17|7.5|10
147 +|VM-4T011*|11|17|26|25|11|15
148 +|VM-4T015*|15|21|35|32|15|20
156 156  
157 157  Table 1-4-1 Product model table
158 158  
159 -(% class="box infomessage" %)
160 -(((
161 161  *:In development
162 -)))
163 163  
164 164  = 4 Installation =
165 165  
... ... @@ -168,49 +168,42 @@
168 168  (% class="wikigeneratedid" %)
169 169  unit: mm
170 170  
171 -(% style="text-align:center" %)
172 -(((
173 -(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
174 -[[Figure 2-1-1 Outline dimension diagram>>image:1624240220324-243.png||id="I1624240220324-243.png"]]
175 -)))
161 +[[image:1624240220324-243.png]]
176 176  
163 +Figure 2-1-1 Outline dimension diagram
177 177  
178 -(% style="width:1271.22px" %)
179 -|=(% rowspan="2" scope="row" style="width: 267px;" %)AC Drive Model|=(% colspan="3" style="width: 384px;" %)Overall Dimensions|=(% colspan="2" style="width: 294px;" %)Mounting Hole|=(% style="width: 259px;" %)Mounting Hole Diameter
180 -|=(% style="width: 118px;" %)H|=(% style="width: 120px;" %)W|=(% style="width: 145px;" %)D|=(% style="width: 147px;" %)H1|=(% style="width: 147px;" %)W1|=(% style="width: 259px;" %)d
181 -|=(% style="width: 267px;" %)VM-2SR75|(% rowspan="2" style="width:118px" %)134|(% rowspan="2" style="width:120px" %)69|(% rowspan="2" style="width:145px" %)104|(% rowspan="2" style="width:147px" %)123|(% rowspan="2" style="width:147px" %)55|(% rowspan="2" style="width:259px" %)5
182 -|=(% style="width: 267px;" %)VM-2S1R5
183 -|=(% style="width: 267px;" %)VM-2S2R2|(% rowspan="2" style="width:118px" %)142|(% rowspan="2" style="width:120px" %)72|(% rowspan="2" style="width:145px" %)116|(% rowspan="2" style="width:147px" %)130|(% rowspan="2" style="width:147px" %)59|(% rowspan="2" style="width:259px" %)5
184 -|=(% style="width: 267px;" %)VM-4T2R2
185 -|=(% style="width: 267px;" %)VM-4T004|(% style="width:118px" %)196|(% style="width:120px" %)95|(% style="width:145px" %)132|(% style="width:147px" %)179|(% style="width:147px" %)79|(% style="width:259px" %)5.5
186 -|=(% style="width: 267px;" %)VM-4T5R5|(% rowspan="2" style="width:118px" %)225|(% rowspan="2" style="width:120px" %)115|(% rowspan="2" style="width:145px" %)154|(% rowspan="2" style="width:147px" %)208|(% rowspan="2" style="width:147px" %)99|(% rowspan="2" style="width:259px" %)5.5
187 -|=(% style="width: 267px;" %)VM-4T7R5
188 -|=(% style="width: 267px;" %)VM-4T011|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
189 -|=(% style="width: 267px;" %)VM-4T015|(% style="width:118px" %)-|(% style="width:120px" %)-|(% style="width:145px" %)-|(% style="width:147px" %)-|(% style="width:147px" %)-|(% style="width:259px" %)-
165 +|(% rowspan="2" %)AC Drive Model|(% colspan="3" %)Overall Dimensions|(% colspan="2" %)Mounting Hole|Mounting Hole Diameter
166 +|H|W|D|H1|W1|d
167 +|VM-2SR75|(% rowspan="2" %)134|(% rowspan="2" %)69|(% rowspan="2" %)104|(% rowspan="2" %)123|(% rowspan="2" %)55|(% rowspan="2" %)5
168 +|VM-2S1R5
169 +|VM-2S2R2|(% rowspan="2" %)142|(% rowspan="2" %)72|(% rowspan="2" %)116|(% rowspan="2" %)130|(% rowspan="2" %)59|(% rowspan="2" %)5
170 +|VM-4T2R2
171 +|VM-4T004|196|95|132|179|79|5.5
172 +|VM-4T5R5|(% rowspan="2" %)225|(% rowspan="2" %)115|(% rowspan="2" %)154|(% rowspan="2" %)208|(% rowspan="2" %)99|(% rowspan="2" %)5.5
173 +|VM-4T7R5
174 +|VM-4T011|-|-|-|-|-|-
175 +|VM-4T015|-|-|-|-|-|-
190 190  
191 191  Table 2-1-1 outline dimension
192 192  
193 193  == Terminal connection ==
194 194  
195 -(% style="text-align:center" %)
196 -(((
197 -(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
198 -[[Figure 2-2-1 Terminal connection>>image:1624240272484-903.png||id="I1624240272484-903.png"]]
199 -)))
181 +[[image:1624240272484-903.png]]
200 200  
183 +Figure 2-2-1 Terminal connection
201 201  
202 202  **Main circuit connection**
203 203  
204 -|=(% scope="row" %)**Terminal mark**|=**Name**|=**Description**
205 -|=R、S、T|Power supply input terminals|Connect to the AC power supply
206 -|=U、V、W|AC drive output terminals|Connect the three-phase motor.
207 -|=[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
187 +|**Terminal mark**|**Name**|**Description**
188 +|R、S、T|Power supply input terminals|Connect to the AC power supply
189 +|U、V、W|AC drive output terminals|Connect the three-phase motor.
190 +|[[image:WECON VM 英文 V01_html_2b5dc89a424d22e6.png||height="22" width="23"]]|Grounding terminal|Must be grounded.
208 208  
209 209  Table 2-2-1 Main circuit terminals and function
210 210  
211 211  **Control circuit connection**
212 212  
213 -|=**Category**|=**Terminal symbol**|=**Terminal name**|=**Function description**
196 +|**Category**|**Terminal symbol**|**Terminal name**|**Function description**
214 214  |(% rowspan="2" %)Power supply|+10V-GND|＋10V power supply|(((
215 215  Provide +10V power supply to external unit.
216 216  
... ... @@ -234,440 +234,409 @@
234 234  
235 235  You can modify the parameters, monitor the working status and start or stop the AC Drive by operating the keypad, as shown in the following figure.
236 236  
237 -(% style="text-align:center" %)
238 -(((
239 -(% class="wikigeneratedid img-thumbnail" style="display:inline-block" %)
240 -[[Figure 3-1-1 Keypad diagram>>image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" id="IWECONVMA082F16587A0V01_html_53c6de9f2105008c.png" width="280"]]
241 -)))
220 +[[image:WECON VM 英文 V01_html_53c6de9f2105008c.png||height="302" width="280"]]
242 242  
222 +Figure 3-1-1 Keypad diagram
243 243  
244 244  == Description of indicators and keys ==
245 245  
246 -|=(% scope="row" %)**Item**|=(% style="width: 213px;" %)**Name**|=(% style="width: 865px;" %)**Function**
247 -|=Indicator|(% style="width:213px" %)Status|(% style="width:865px" %)(((
248 -* RUN: ON/Running; OFF/Stop.
249 -* REMOTE: ON/Terminal control; Blinking/Communication; OFF/keypad control.
250 -* FWD/REV: ON/Forward rotation; OFF/Reverse rotation; Blinking/Forward and reverse switching.
251 -* ALARM: Blinking /Fault state.
226 +|**Item**|**Name**|**Function**
227 +|Indicator|Status|(((
228 +* RUN： ON/Running；OFF/Stop.
229 +* REMOTE：ON/Terminal control；Blinking/Communication；OFF/keypad control.
230 +* FWD/REV： ON/Forward rotation；OFF/Reverse rotation；Blinking/Forward and reverse switching.
231 +* ALARM：Blinking /Fault state.
252 252  )))
253 -|=(% rowspan="6" %)Keys|(% style="width:213px" %)(((
254 -PRG (Programming)
255 -)))|(% style="width:865px" %)Enter or exit the first menu.
256 -|(% scope="row" style="width:213px" %)ENT (Confirm)|(% style="width:865px" %)Enter the menu interfaces and confirm the parameter setting.
257 -|(% scope="row" style="width:213px" %)△（Increment）|(% style="width:865px" %)Increase date or function code.
258 -|(% scope="row" style="width:213px" %)▽（Decrement）|(% style="width:865px" %)Decrease data or function code.
259 -|(% scope="row" style="width:213px" %)<<（Shift）|(% style="width:865px" %)Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
260 -|(% scope="row" style="width:213px" %)RUN/STOP|(% style="width:865px" %)(((
233 +|(% rowspan="6" %)keys|(((
234 +PRG
235 +
236 +(Programming)
237 +)))|Enter or exit the first menu.
238 +|ENT (Confirm)|Enter the menu interfaces and confirm the parameter setting.
239 +|△（Increment）|Increase date or function code.
240 +|▽（Decrement）|Decrease data or function code.
241 +|<<（Shift）|Select the displayed parameters in the stop or running state and select the digit to be modified when modifying parameters.
242 +|RUN/STOP|(((
261 261  Control drive start and stop in keypad control mode.
262 262  
263 263  Perform the reset operation when it is in the fault state.
264 264  )))
265 -|=Potentiometer|(% style="width:213px" %)Resistance potentiometer|(% style="width:865px" %)Frequency adjustment in keyboard operation mode
247 +|potentiometer|Resistance potentiometer|Frequency adjustment in keyboard operation mode
266 266  
267 267  Table 3-2-1 Description of Indicators and key
268 268  
269 269  = 6 Parameter function =
270 270  
271 -* “○”: the parameter can be modified in both standby and operating state；
272 -* “●”: the parameter can’t be modified in operating state；
273 -* “◎”:the parameter is the actual detected and recorded value which can’t be modified；
253 +“○”: the parameter can be modified in both standby and operating state；
274 274  
275 -(% class="box infomessage" %)
276 -(((
277 -**Note: **the communication address is hexadecimal.
278 -)))
255 +“●”: the parameter can’t be modified in operating state；
279 279  
257 +“◎”:the parameter is the actual detected and recorded value which can’t be modified；
258 +
259 +Note: the communication address is hexadecimal.
260 +
280 280  == Functional parameter ==
281 281  
282 -|=(% scope="row" style="width: 97px;" %)Parameter|=(% style="width: 320px;" %)Name|=(% style="width: 428px;" %)Setting Range|=(% style="width: 190px;" %)Default|=(% style="width: 80px;" %)Property|=(% style="width: 87px;" %)Address
283 -|=(% style="width: 97px;" %)F0.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0000
284 -|=(% style="width: 97px;" %)F0.01|(% style="width:320px" %)Command source selection|(% style="width:428px" %)(((
285 -* 0：Operation panel control（LED off）
286 -* 1：Terminal control（LED on）
287 -* 2：Communication LED (LED blinking）
288 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0001
289 -|=(% style="width: 97px;" %)F0.02|(% style="width:320px" %)Setting main frequency source X|(% style="width:428px" %)(((
290 -* 0：Digital setting (non-retentive at power failure)
291 -* 1：Digital setting (retentive at power failure)
292 -* 2：Keypad Knob
293 -* 3：AI
294 -* 4：Multi-stage speed
295 -* 5：Simple PLC
296 -* 6：Communication
297 -)))|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0002
298 -|=(% style="width: 97px;" %)F0.03|(% style="width:320px" %)Keypad setting frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0003
299 -|=(% style="width: 97px;" %)F0.04|(% style="width:320px" %)Running direction selection|(% style="width:428px" %)(((
300 -* 0：Forward
301 -* 1：Reverse
302 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0004
303 -|=(% style="width: 97px;" %)F0.05|(% style="width:320px" %)Maximum Output Frequency|(% style="width:428px" %)50.00Hz～400.00Hz|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)●|(% style="width:87px" %)0005
304 -|=(% style="width: 97px;" %)F0.06|(% style="width:320px" %)Upper Limit of Frequency|(% style="width:428px" %)F0.07～F0.05|(% style="width:190px" %)50.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0006
305 -|=(% style="width: 97px;" %)F0.07|(% style="width:320px" %)Lower Limit of Frequency|(% style="width:428px" %)0.00Hz～F0.06|(% style="width:190px" %)0.0Hz|(% style="width:80px" %)○|(% style="width:87px" %)0007
306 -|=(% style="width: 97px;" %)F0.08|(% style="width:320px" %)The option of frequency lower limit|(% style="width:428px" %)(((
307 -* 0：Running at frequency lower limit
308 -* 1：Stop
309 -* 2：Standby
310 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0008
311 -|=(% style="width: 97px;" %)F0.09|(% style="width:320px" %)Carrier Frequency|(% style="width:428px" %)1kHz～6.0kHz|(% style="width:190px" %)6.0kHz|(% style="width:80px" %)●|(% style="width:87px" %)0009
312 -|=(% style="width: 97px;" %)F0.10|(% style="width:320px" %)Acceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000A
313 -|=(% style="width: 97px;" %)F0.11|(% style="width:320px" %)Deceleration Time 1|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)000B
314 -|=(% style="width: 97px;" %)F0.12|(% style="width:320px" %)Stop Mode|(% style="width:428px" %)(((
315 -* 0：Decelerate to stop
316 -* 1：Free stop
317 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000C
318 -|=(% style="width: 97px;" %)F0.13|(% style="width:320px" %)Retentive of digital setting frequency|(% style="width:428px" %)(((
319 -* 0：No retentive
320 -* 1：retentive
321 -)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)000D
322 -|=(% style="width: 97px;" %)F0.14|(% style="width:320px" %)Fan operating mode|(% style="width:428px" %)(((
323 -* 0：Run when motor is running
324 -* 1：Keep run when power on
325 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000E
326 -|=(% style="width: 97px;" %)F0.15|(% style="width:320px" %)AI1 Input Option|(% style="width:428px" %)(((
327 -* 0: 0-10V
328 -* 1: 4-20mA
329 -* 2: 0-20mA
330 -* 3: 0-5V
331 -* 4: 0.5-4.5V
332 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)000F
333 -|=(% style="width: 97px;" %)F1.00|(% style="width:320px" %)Default Setting Restoring|(% style="width:428px" %)(((
334 -* 0: No Operation
335 -* 1: Restore to factory default setting (not including F2 parameters)
336 -* 2: Clear error records
337 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0100
338 -|=(% style="width: 97px;" %)F1.01|(% style="width:320px" %)Parameters Lockup|(% style="width:428px" %)(((
339 -* 0: Invalid
340 -* 1: Valid
341 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0101
342 -|=(% style="width: 97px;" %)F1.02|(% style="width:320px" %)User Password|(% style="width:428px" %)0~~65000|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0102
343 -|=(% style="width: 97px;" %)F2.00|(% style="width:320px" %)Motor Rated Power|(% style="width:428px" %)0.1kW~~2.2kW|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0200
344 -|=(% style="width: 97px;" %)F2.01|(% style="width:320px" %)Motor Rated Voltage|(% style="width:428px" %)0~~380V|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0201
345 -|=(% style="width: 97px;" %)F2.02|(% style="width:320px" %)Motor Rated Frequency|(% style="width:428px" %)0~~ F0.05|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0202
346 -|=(% style="width: 97px;" %)F2.03|(% style="width:320px" %)Motor Rated Current|(% style="width:428px" %)1.00~~10.00|(% style="width:190px" %)Determined by Drive Model|(% style="width:80px" %)●|(% style="width:87px" %)0203
347 -|=(% style="width: 97px;" %)F2.05|(% style="width:320px" %)Type of Motor|(% style="width:428px" %)(((
348 -* 0: Single Phase
349 -* 1: Three Phase
350 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0205
351 -|=(% style="width: 97px;" %)F2.06|(% style="width:320px" %)Single-phase motor main and auxiliary winding turns ratio|(% style="width:428px" %)10~~200|(% style="width:190px" %)80|(% style="width:80px" %)○|(% style="width:87px" %)0206
352 -|=(% style="width: 97px;" %)F2.07|(% style="width:320px" %)Single-phase motor current correction factor|(% style="width:428px" %)50~~200|(% style="width:190px" %)130|(% style="width:80px" %)○|(% style="width:87px" %)0207
353 -|=(% style="width: 97px;" %)F4.00|(% style="width:320px" %)Torque Boost|(% style="width:428px" %)0.0%~~30.0%|(% style="width:190px" %)4.0%|(% style="width:80px" %)○|(% style="width:87px" %)0400
354 -|=(% style="width: 97px;" %)F4.01|(% style="width:320px" %)Cut-off frequency of torque boost|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)50.00Hz|(% style="width:80px" %)●|(% style="width:87px" %)0401
355 -|=(% style="width: 97px;" %)F4.02|(% style="width:320px" %)Trigging frequency of DC braking at stop|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)0.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0402
356 -|=(% style="width: 97px;" %)F4.03|(% style="width:320px" %)Delay time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0403
357 -|=(% style="width: 97px;" %)F4.04|(% style="width:320px" %)The current of DC braking at stop|(% style="width:428px" %)0～100%|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0404
358 -|=(% style="width: 97px;" %)F4.05|(% style="width:320px" %)The time of DC braking at stop|(% style="width:428px" %)0.0s～50.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0405
359 -|=(% style="width: 97px;" %)F4.06|(% style="width:320px" %)Automatic adjustment of carrier Frequency|(% style="width:428px" %)(((
360 -* 0: Invalid;
361 -* 1: Valid
362 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0406
363 -|=(% style="width: 97px;" %)F4.07|(% style="width:320px" %)0 frequency output option|(% style="width:428px" %)(((
364 -* 0: Valid;
365 -* 1: Invalid
366 -)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0407
367 -|=(% style="width: 97px;" %)F5.00|(% style="width:320px" %)DI1 terminal function selection|(% rowspan="4" style="width:428px" %)(((
368 -* 0: No function
369 -* 1: Forward running (FWD)
370 -* 2: Reverse running (REV)
371 -* 3: Three-wire operation control
372 -* 4: Forward point movement (FJOG)
373 -* 5: Reverse point movement (RJOG)
374 -* 6: Error Reset
375 -* 7: Terminal UP
376 -* 8: Terminal Down
377 -* 9: UP/DOWN Setting Clear
378 -* 10: External error input(Normally Open)
379 -* 11: PLC Status reset
380 -* 12: Multi stage speed terminal 1
381 -* 13: Multi stage speed terminal 2
382 -* 14: Reserved
383 -)))|(% style="width:190px" %)1|(% style="width:80px" %)●|(% style="width:87px" %)0500
384 -|=(% style="width: 97px;" %)F5.01|(% style="width:320px" %)DI2 terminal function selection|(% style="width:190px" %)2|(% style="width:80px" %)●|(% style="width:87px" %)0501
385 -|=(% style="width: 97px;" %)F5.02|(% style="width:320px" %)DI3 terminal function selection|(% style="width:190px" %)6|(% style="width:80px" %)●|(% style="width:87px" %)0502
386 -|=(% style="width: 97px;" %)F5.03|(% style="width:320px" %)DI4 terminal function selection|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0503
387 -|=(% style="width: 97px;" %)F5.04|(% style="width:320px" %)DI filter time|(% style="width:428px" %)0.000s～1.000s|(% style="width:190px" %)0.010s|(% style="width:80px" %)○|(% style="width:87px" %)0504
388 -|=(% style="width: 97px;" %)F5.05|(% style="width:320px" %)Terminal Command Option|(% style="width:428px" %)(((
389 -* 0: Two-line mode 1
390 -* 1: Two-line mode 2
391 -* 2: Three-line mode 1
392 -* 3: Three-line mode 2
393 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0505
394 -|=(% style="width: 97px;" %)F5.06|(% style="width:320px" %)UP/DOWN change rate range|(% style="width:428px" %)0.01Hz～50.00Hz|(% style="width:190px" %)0.50Hz|(% style="width:80px" %)○|(% style="width:87px" %)0506
395 -|=(% style="width: 97px;" %)F5.07|(% style="width:320px" %)AI minimum input|(% style="width:428px" %)0.00V～F5.09|(% style="width:190px" %)0.00V|(% style="width:80px" %)○|(% style="width:87px" %)0507
396 -|=(% style="width: 97px;" %)F5.08|(% style="width:320px" %)Percentage rate of AI minimum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)0508
397 -|=(% style="width: 97px;" %)F5.09|(% style="width:320px" %)AI maximum input|(% style="width:428px" %)F5.07～+10.00V|(% style="width:190px" %)10.00V|(% style="width:80px" %)○|(% style="width:87px" %)0509
398 -|=(% style="width: 97px;" %)F5.10|(% style="width:320px" %)Percentage rate of AI maximum input|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)100.0%|(% style="width:80px" %)○|(% style="width:87px" %)050A
399 -|=(% style="width: 97px;" %)F5.11|(% style="width:320px" %)AI filter time|(% style="width:428px" %)0.00s～10.00s|(% style="width:190px" %)0.10s|(% style="width:80px" %)○|(% style="width:87px" %)050B
400 -|=(% style="width: 97px;" %)F5.12|(% style="width:320px" %)DI1 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050C
401 -|=(% style="width: 97px;" %)F5.13|(% style="width:320px" %)DI2 Enable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050D
402 -|=(% style="width: 97px;" %)F5.14|(% style="width:320px" %)DI1 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050E
403 -|=(% style="width: 97px;" %)F5.15|(% style="width:320px" %)DI2 Disable Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)050F
404 -|=(% style="width: 97px;" %)F5.16|(% style="width:320px" %)AI Input Digital Functional Option|(% style="width:428px" %)(((
405 -* 0: No function
406 -* 1: Forward running (FWD)
407 -* 2: Reverse running (REV)
408 -* 3: Three-wire operation control
409 -* 4: Forward point movement (FJOG)
410 -* 5: Reverse point movement (RJOG)
411 -* 6: Error Reset
412 -* 7: Terminal UP
413 -* 8: Terminal Down
414 -* 9: UP/DOWN Setting Clear
415 -* 10: External error input(Normally Open)
416 -* 11: PLC Status reset
417 -* 12: Multi stage speed terminal 1
418 -* 13: Multi stage speed terminal 2
419 -* 14: Reserved
420 -)))|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0510
421 -|=(% style="width: 97px;" %)F5.17|(% style="width:320px" %)AI Input Valid Level Option|(% style="width:428px" %)(((
422 -* 0: Low Level Valid
423 -* 1: High Level Valid
424 -)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0511
425 -|=(% style="width: 97px;" %)F6.00|(% style="width:320px" %)Relay Output Option|(% style="width:428px" %)(((
426 -* 0: No Output
427 -* 1: VFD Running
428 -* 2: Error Output(Output is valid only after VFD stops)
429 -* 3: Ready for Running
430 -* 4: Communication Setting
431 -* 5: User Defined Output
432 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0600
433 -|=(% style="width: 97px;" %)F6.01|(% style="width:320px" %)Relay1 Closed Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0601
434 -|=(% style="width: 97px;" %)F6.02|(% style="width:320px" %)Relay1 Open Delay Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0602
435 -|=(% style="width: 97px;" %)F6.03|(% style="width:320px" %)(((
263 +|Parameter|Name|Setting Range|Default|Property|Address
264 +|F0.00|Reserved|Reserved|0|●|0000
265 +|F0.01|Command source selection|0：Operation panel control（LED off）
266 +1：Terminal control（LED on）
267 + 2：Communication LED (LED blinking）|0|●|0001
268 +|F0.02|Setting main frequency source X|0：Digital setting (non-retentive at power failure)
269 + 1：Digital setting (retentive at power failure)
270 + 2：Keypad Knob
271 + 3：AI
272 + 4：Multi-stage speed
273 + 5：Simple PLC
274 + 6：Communication|2|●|0002
275 +|F0.03|Keypad setting frequency|0.00Hz～F0.05|50.0Hz|○|0003
276 +|F0.04|Running direction selection|0：Forward
277 + 1：Reverse|0|○|0004
278 +|F0.05|Maximum Output Frequency|50.00Hz～400.00Hz|50.0Hz|●|0005
279 +|F0.06|Upper Limit of Frequency|F0.07～F0.05|50.0Hz|○|0006
280 +|F0.07|Lower Limit of Frequency|0.00Hz～F0.06|0.0Hz|○|0007
281 +|F0.08|The option of frequency lower limit|0：Running at frequency lower limit
282 +1：Stop
283 +2：Standby|0|○|0008
284 +|F0.09|Carrier Frequency|1kHz～6.0kHz|6.0kHz|●|0009
285 +|F0.10|Acceleration Time 1|0.0s～100.0s|10.0s|○|000A
286 +|F0.11|Deceleration Time 1|0.0s～100.0s|10.0s|○|000B
287 +|F0.12|Stop Mode|0：Decelerate to stop
288 + 1：Free stop|0|○|000C
289 +|F0.13|Retentive of digital setting frequency|0：No retentive
290 +1：retentive|1|●|000D
291 +|F0.14|Fan operating mode|0：Run when motor is running
292 + 1：Keep run when power on|0|○|000E
293 +|F0.15|AI1 Input Option|(((
294 +0：0-10V
295 +
296 +1：4-20mA
297 +
298 +2: 0-20mA
299 +
300 +3：0-5V
301 +
302 +4：0.5-4.5V
303 +)))|0|○|000F
304 +|F1.00|Default Setting Restoring|0：No Operation
305 + 1：Restore to factory default setting (not including F2 parameters)
306 + 2：Clear error records|0|●|0100
307 +|F1.01|Parameters Lockup|0：Invalid
308 + 1：Valid|0|○|0101
309 +|F1.02|User Password|0～65000|0|○|0102
310 +|F2.00|Motor Rated Power|0.1kW～2.2kW|Determined by Drive Model|●|0200
311 +|F2.01|Motor Rated Voltage|0-380V|Determined by Drive Model|●|0201
312 +|F2.02|Motor Rated Frequency|0- F0.05|Determined by Drive Model定|●|0202
313 +|F2.03|Motor Rated Current|1.00-10.00|Determined by Drive Model|●|0203
314 +|F2.05|Type of Motor|(((
315 +0：Single Phase
316 +
317 +1：Three Phase
318 +)))|0|●|0205
319 +|F2.06|Single-phase motor main and auxiliary winding turns ratio|10 ～ 200|80|○|0206
320 +|F2.07|Single-phase motor current correction factor|50 ～ 200|130|○|0207
321 +|F4.00|Torque Boost|0.0%～30.0%|4.0%|○|0400
322 +|F4.01|Cut-off frequency of torque boost|0.00Hz～F0.05|50.00Hz|●|0401
323 +|F4.02|Trigging frequency of DC braking at stop|0.00Hz～F0.05|0.00Hz|○|0402
324 +|F4.03|Delay time of DC braking at stop|0.0s～50.0s|0.0s|○|0403
325 +|F4.04|The current of DC braking at stop|0～100%|0|○|0404
326 +|F4.05|The time of DC braking at stop|0.0s～50.0s|0.0s|○|0405
327 +|F4.06|Automatic adjustment of carrier Frequency|0:Invalid; 1:Valid|0|●|0406
328 +|F4.07|0 frequency output option|0:Valid; 1:Invalid|1|●|0407
329 +|F5.00|DI1 terminal function selection|(% rowspan="4" %)(((
330 +0: No function
331 +
332 +1: Forward running (FWD)
333 +
334 +2: Reverse running (REV)
335 +
336 +3: Three-wire operation control
337 +
338 +4: Forward point movement (FJOG)
339 +
340 +5: Reverse point movement (RJOG)
341 +6:Error Reset
342 + 7:Terminal UP
343 + 8:Terminal Down
344 + 9:UP/DOWN Setting Clear
345 + 10:External error input(Normally Open)
346 + 11：PLC Status reset
347 + 12:Multi stage speed terminal 1
348 + 13: Multi stage speed terminal 2
349 + 14:Reserved
350 +)))|1|●|0500
351 +|F5.01|DI2 terminal function selection|2|●|0501
352 +|F5.02|DI3 terminal function selection|6|●|0502
353 +|F5.03|DI4 terminal function selection|0|●|0503
354 +|F5.04|DI filter time|0.000s～1.000s|0.010s|○|0504
355 +|F5.05|Terminal Command Option|0: Two-line mode 1
356 +1: Two-line mode 2
357 + 2: Three-line mode 1
358 +3: Three-line mode 2|0|●|0505
359 +|F5.06|UP/DOWN change rate range|0.01Hz～50.00Hz|0.50Hz|○|0506
360 +|F5.07|AI minimum input|0.00V～F5.09|0.00V|○|0507
361 +|F5.08|Percentage rate of AI minimum input|-100.0%～+100.0%|0.0%|○|0508
362 +|F5.09|AI maximum input|F5.07～+10.00V|10.00V|○|0509
363 +|F5.10|Percentage rate of AI maximum input|-100.0%～+100.0%|100.0%|○|050A
364 +|F5.11|AI filter time|0.00s～10.00s|0.10s|○|050B
365 +|F5.12|DI1 Enable Delay Time|0.0s～100.0s|0.0s|○|050C
366 +|F5.13|DI2 Enable Delay Time|0.0s～100.0s|0.0s|○|050D
367 +|F5.14|DI1 Disable Delay Time|0.0s～100.0s|0.0s|○|050E
368 +|F5.15|DI2 Disable Delay Time|0.0s～100.0s|0.0s|○|050F
369 +|F5.16|AI Input Digital Functional Option|(((
370 +0: No function
371 +
372 +1: Forward running (FWD)
373 +
374 +2: Reverse running (REV)
375 +
376 +3: Three-wire operation control
377 +
378 +4: Forward point movement (FJOG)
379 +
380 +5: Reverse point movement (RJOG)
381 +6:Error Reset
382 + 7:Terminal UP
383 + 8:Terminal Down
384 + 9:UP/DOWN Setting Clear
385 + 10:External error input(Normally Open)
386 + 11：PLC Status reset
387 + 12:Multi stage speed terminal 1
388 + 13: Multi stage speed terminal 2
389 + 14:Reserved
390 +)))|0|●|0510
391 +|F5.17|AI Input Valid Level Option|(((
392 +0：Low Level Valid
393 +
394 +1：High Level Valid
395 +)))|1|○|0511
396 +|F6.00|Relay Output Option|0：No Output
397 + 1：VFD Running
398 + 2：Error Output(Output is valid only after VFD stops)
399 + 3：Ready for Running
400 + 4：Communication Setting
401 + 5: User Defined Output|0|○|0600
402 +|F6.01|Relay1 Closed Delay Time|0.0s～100.0s|0.0s|○|0601
403 +|F6.02|Relay1 Open Delay Time|0.0s～100.0s|0.0s|○|0602
404 +|F6.03|(((
436 436  User defined output
437 437  
438 438  Variability option（EX）
439 -)))|(% style="width:428px" %)(((
440 -* 0: Running Frequency
441 -* 1: Set Frequency
442 -* 2: Bus Voltage
443 -* 3: Output Voltage
444 -* 4: Output Current
445 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0603
446 -|=(% style="width: 97px;" %)F6.04|(% style="width:320px" %)User defined comparison method|(% style="width:428px" %)Units digit：comparison test method(((
447 -* 0: Equal (EX==X1)
448 -* 1: Equal or greater than
449 -* 2: Equal or less than
450 -* 3: Interval comparison (X1≤EX≤X2)
451 -* 4: Units digit test (EX&X1=X2)
452 -
408 +)))|0：Running Frequency
409 + 1：Set Frequency
410 + 2：Bus Voltage
411 + 3：Output Voltage
412 + 4：Output Current|0|○|0603
413 +|F6.04|User defined comparison method|Units digit：comparison test method
414 +0: Equal (EX==X1)
415 +1: Equal or greater than
416 +2: Equal or less than
417 +3 Interval comparison (X1≤EX≤X2)
418 +4:Units digit test (EX&X1=X2)
453 453  Tens digit: output method
454 -
455 -* 0: False value output
456 -* 1: Real value output
457 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0604
458 -|=(% style="width: 97px;" %)F6.05|(% style="width:320px" %)User defined output dead zone|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0605
459 -|=(% style="width: 97px;" %)F6.06|(% style="width:320px" %)(((
420 + 0: False value output
421 +1: Real value output|0|○|0604
422 +|F6.05|User defined output dead zone|0～65535|0|○|0605
423 +|F6.06|(((
460 460  User-defined output
461 461  
462 462  comparison value 1
463 -)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0606
464 -|=(% style="width: 97px;" %)F6.07|(% style="width:320px" %)(((
427 +)))|0～65535|0|○|0606
428 +|F6.07|(((
465 465  User-defined output
466 466  
467 467  comparison value 2
468 -)))|(% style="width:428px" %)0～65535|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0607
469 -|=(% style="width: 97px;" %)F6.08|(% style="width:320px" %)AO1 Output Option|(% rowspan="2" style="width:428px" %)(((
470 -* 0: Running Frequency（0～F0.05）
471 -* 1: Set Frequency（0～F0.05）
472 -* 2: Output Current（0～Double Rated Current of VFD）
473 -* 3: Output Voltage（0～1.2times of VFD Rated Output Voltage）
474 -* 4: AI（0～10V）
475 -* 5: Bus Voltage（0～500.0/1000.0V）
476 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0608
477 -|=(% style="width: 97px;" %)F6.09|(% style="width:320px" %)AO2 Output Option|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0609
478 -|=(% style="width: 97px;" %)F6.10|(% style="width:320px" %)AO1 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060A
479 -|=(% style="width: 97px;" %)F6.11|(% style="width:320px" %)AO1 gain|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060B
480 -|=(% style="width: 97px;" %)F6.12|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-100.0%～+100.0%|(% style="width:190px" %)0.0%|(% style="width:80px" %)○|(% style="width:87px" %)060C
481 -|=(% style="width: 97px;" %)F6.13|(% style="width:320px" %)AO2 offset coefficient|(% style="width:428px" %)-10.00～+10.00|(% style="width:190px" %)1.00|(% style="width:80px" %)○|(% style="width:87px" %)060D
482 -|=(% style="width: 97px;" %)F7.00|(% style="width:320px" %)Reserved|(% style="width:428px" %)Reserved|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0700
483 -|=(% style="width: 97px;" %)F7.01|(% style="width:320px" %)STOP Button Function|(% style="width:428px" %)(((
484 -* 0: Valid only at keypad control mode
485 -* 1: Valid at all control modes
486 -)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0701
487 -|=(% style="width: 97px;" %)F7.02|(% style="width:320px" %)LED display parameters at running status|(% rowspan="2" style="width:428px" %)(((
488 -* Bit0: Running Frequency(Hz)
489 -* Bit1: Set Frequency(Hz)
490 -* Bit2: Bus Voltage(V)
491 -* Bit3: Output Voltage(V)
492 -* Bit4: Output Current(A)
493 -* Bit5: DI Input Status
494 -* Bit6: DO Output Status
495 -* Bit7: Keypad Knob Voltage(V)
496 -* Bit8: AIVoltage(V)
497 -* Bit9: Load Speed
498 -* Bit10: PID Set Value
499 -* Bit11: PID Feedback Value
500 -* Bit12: PLC Stage
501 -* Bit13: Feedback Frequency（Unit：0.1Hz)
502 -* Bit14: Communication Set Value
503 -* Bit15: Main Frequency Source X
504 -)))|(% style="width:190px" %)0x1F|(% style="width:80px" %)○|(% style="width:87px" %)0702
505 -|=(% style="width: 97px;" %)F7.03|(% style="width:320px" %)LED display parameters at stop status|(% style="width:190px" %)0x06|(% style="width:80px" %)○|(% style="width:87px" %)0703
506 -|=(% style="width: 97px;" %)F7.04|(% style="width:320px" %)Load speed display coefficient|(% style="width:428px" %)0.0001～6.5000|(% style="width:190px" %)3.000|(% style="width:80px" %)○|(% style="width:87px" %)0704
507 -|=(% style="width: 97px;" %)F7.05|(% style="width:320px" %)Software Version|(% style="width:428px" %)-|(% style="width:190px" %)-|(% style="width:80px" %)◎|(% style="width:87px" %)0705
508 -|=(% style="width: 97px;" %)F8.00|(% style="width:320px" %)Jog Running Frequency|(% style="width:428px" %)0.00Hz～F0.05|(% style="width:190px" %)2.00Hz|(% style="width:80px" %)○|(% style="width:87px" %)0800
509 -|=(% style="width: 97px;" %)F8.01|(% style="width:320px" %)Jog Acceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0801
510 -|=(% style="width: 97px;" %)F8.02|(% style="width:320px" %)Jog Deceleration Time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)10.0s|(% style="width:80px" %)○|(% style="width:87px" %)0802
511 -|=(% style="width: 97px;" %)F8.03|(% style="width:320px" %)FWD/REV dead zone time|(% style="width:428px" %)0.0s～100.0s|(% style="width:190px" %)0.0s|(% style="width:80px" %)○|(% style="width:87px" %)0803
512 -|=(% style="width: 97px;" %)F8.04|(% style="width:320px" %)Reverse control|(% style="width:428px" %)(((
513 -* 0: valid
514 -* 1: invalid
515 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0804
516 -|=(% style="width: 97px;" %)F8.05|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0805
517 -|=(% style="width: 97px;" %)F8.06|(% style="width:320px" %)Startup Protection Option|(% style="width:428px" %)(((
518 -* 0：Invalid
519 -* 1：Valid
520 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0806
521 -|=(% style="width: 97px;" %)F8.07|(% style="width:320px" %)Terminal jogging priority|(% style="width:428px" %)(((
522 -* 0: Invalid
523 -* 1: Valid
524 -)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0807
525 -|=(% style="width: 97px;" %)FC.00|(% style="width:320px" %)Local Addresse|(% style="width:428px" %)1～30，0 for broadcast addresse|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C00
526 -|=(% style="width: 97px;" %)FC.01|(% style="width:320px" %)Baud Rate|(% style="width:428px" %)(((
527 -* 0: 4800bPS
528 -* 1: 9600bPS
529 -* 2: 19200bPS
530 -)))|(% style="width:190px" %)1|(% style="width:80px" %)○|(% style="width:87px" %)0C01
531 -|=(% style="width: 97px;" %)FC.02|(% style="width:320px" %)Data format|(% style="width:428px" %)(((
532 -* 0: No check, data format (8.N.1)
533 -* 1: Odd Parity check, data format (8.O.1)
534 -* 2: Even parity check, data format (8.E.1)
535 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0C02
536 -|=(% style="width: 97px;" %)FC.03|(% style="width:320px" %)Respond Delay|(% style="width:428px" %)0ms～20ms|(% style="width:190px" %)2|(% style="width:80px" %)○|(% style="width:87px" %)0C03
537 -|=(% style="width: 97px;" %)FC.04|(% style="width:320px" %)Reserved|(% style="width:428px" %)0|(% style="width:190px" %)0|(% style="width:80px" %)●|(% style="width:87px" %)0C04
538 -|=(% style="width: 97px;" %)FD.00|(% style="width:320px" %)Multistage speed 0|(% style="width:428px" %)-100.0%～100.0%(100.0% as F0.05)|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D00
539 -|=(% style="width: 97px;" %)FD.01|(% style="width:320px" %)Multistage speed 1|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D01
540 -|=(% style="width: 97px;" %)FD.02|(% style="width:320px" %)Multistage speed 2|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D02
541 -|=(% style="width: 97px;" %)FD.03|(% style="width:320px" %)Multistage speed 3|(% style="width:428px" %)-100.0%～100.0%|(% style="width:190px" %)0.00%|(% style="width:80px" %)○|(% style="width:87px" %)0D03
542 -|=(% style="width: 97px;" %)FD.04|(% style="width:320px" %)Simple PLC running mode|(% style="width:428px" %)(((
543 -* 0: Stop after the AC Drive runs one cycle
544 -* 1: Keep final values after the AC Drive runs one cycle
545 -* 2: Repeat after the AC Drive runs one cycle
546 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D04
547 -|=(% style="width: 97px;" %)FD.05|(% style="width:320px" %)Simple PLC retentive option|(% style="width:428px" %)Units Digit: Reserved
548 -Tens Digit：(((
549 -* 0: Invalid
550 -* 1: Valid
551 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D05
552 -|=(% style="width: 97px;" %)FD.06|(% style="width:320px" %)Running time of simple PLC reference 0|(% style="width:428px" %)0.0s(h)～100.0s(h)|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D06
553 -|=(% style="width: 97px;" %)FD.07|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 0|(% style="width:428px" %)0～3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D07
554 -|=(% style="width: 97px;" %)FD.08|(% style="width:320px" %)Running time of simple PLC reference 1|(% style="width:428px" %)0.0～100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D08
555 -|=(% style="width: 97px;" %)FD.09|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 1|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D09
556 -|=(% style="width: 97px;" %)FD.10|(% style="width:320px" %)Running time of simple PLC reference 2|(% style="width:428px" %)0.0 ~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0A
557 -|=(% style="width: 97px;" %)FD.11|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 2|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0B
558 -|=(% style="width: 97px;" %)FD.12|(% style="width:320px" %)Running time of simple PLC reference 3|(% style="width:428px" %)0.0~~100.0|(% style="width:190px" %)0.0s(h)|(% style="width:80px" %)○|(% style="width:87px" %)0D0C
559 -|=(% style="width: 97px;" %)FD.13|(% style="width:320px" %)Acceleration/deceleration time of simple PLC reference 3|(% style="width:428px" %)0~~3|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0D
560 -|=(% style="width: 97px;" %)FD.14|(% style="width:320px" %)Time unit of simple PLC running|(% style="width:428px" %)(((
561 -* 0: s（second）
562 -* 1: h（hour）
563 -* 2: min（minute）
564 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0E
565 -|=(% style="width: 97px;" %)FD.15|(% style="width:320px" %)The source of multistage speed 0|(% style="width:428px" %)(((
566 -* 0: Set by FD.00
567 -* 1: AI
568 -)))|(% style="width:190px" %)0|(% style="width:80px" %)○|(% style="width:87px" %)0D0F
432 +)))|0～65535|0|○|0607
433 +|F6.08|AO1 Output Option|(% rowspan="2" %)0：Running Frequency（0～F0.05）
434 + 1：Set Frequency（0～F0.05）
435 + 2：Output Current（0～Double Rated Current of VFD）
436 + 3：Output Voltage（0～1.2times of VFD Rated Output Voltage）
437 + 4：AI（0～10V）
438 + 5：Bus Voltage（0～500.0/1000.0V）|0|○|0608
439 +|F6.09|AO2 Output Option|0|○|0609
440 +|F6.10|AO1 offset coefficient|-100.0%～+100.0%|0.0%|○|060A
441 +|F6.11|AO1 gain|-10.00～+10.00|1.00|○|060B
442 +|F6.12|AO2 offset coefficient|-100.0%～+100.0%|0.0%|○|060C
443 +|F6.13|AO2 offset coefficient|-10.00～+10.00|1.00|○|060D
444 +|F7.00|Reserved|Reserved|0|○|0700
445 +|F7.01|STOP Button Function|0：Valid only at keypad control mode
446 + 1：Valid at all control modes|1|○|0701
447 +|F7.02|LED display parameters at running status|(% rowspan="2" %)(((
448 +Bit0：Running Frequency(Hz)
449 + Bit1：Set Frequency(Hz)
450 + Bit2：Bus Voltage(V)
451 + Bit3：Output Voltage(V)
452 + Bit4：Output Current(A)
453 + Bit5：DI Input Status
454 + Bit6：DO Output Status
455 + Bit7：Keypad Knob Voltage(V)
569 569  
457 +Bit8：AIVoltage(V)
458 + Bit9：Load Speed
459 + Bit10：PID Set Value
460 + Bit11：PID Feedback Value
461 + Bit12：PLC Stage
462 + Bit13：Feedback Frequency（Unit：0.1Hz)
463 +
464 +Bit14：Communication Set Value
465 + Bit15：Main Frequency Source X
466 +)))|0x1F|○|0702
467 +|F7.03|LED display parameters at stop status|0x06|○|0703
468 +|F7.04|Load speed display coefficient|0.0001～6.5000|3.000|○|0704
469 +|F7.05|Software Version|-|-|◎|0705
470 +|F8.00|Jog Running Frequency|0.00Hz～F0.05|2.00Hz|○|0800
471 +|F8.01|Jog Acceleration Time|0.0s～100.0s|10.0s|○|0801
472 +|F8.02|Jog Deceleration Time|0.0s～100.0s|10.0s|○|0802
473 +|F8.03|FWD/REV dead zone time|0.0s～100.0s|0.0s|○|0803
474 +|F8.04|Reverse control|(((
475 +0：valid
476 +
477 +1：invalid
478 +)))|0|○|0804
479 +|F8.05|Reserved|0|0|●|0805
480 +|F8.06|Startup Protection Option|0：Invalid
481 + 1：Valid|0|○|0806
482 +|F8.07|Terminal jogging priority|0：Invalid 1：Valid|1|○|0807
483 +|FC.00|Local Addresse|1～30，0 for broadcast addresse|1|○|0C00
484 +|FC.01|Baud Rate|0：4800bPS
485 + 1：9600bPS
486 + 2：19200bPS|1|○|0C01
487 +|FC.02|Data format|0：No check, data format (8.N.1)
488 + 1：Odd Parity check, data format (8.O.1)
489 + 2：Even parity check, data format (8.E.1)|0|○|0C02
490 +|FC.03|Respond Delay|0ms～20ms|2|○|0C03
491 +|FC.04|Reserved|0|0|●|0C04
492 +|FD.00|Multistage speed 0|-100.0%～100.0%(100.0% as F0.05)|0.00%|○|0D00
493 +|FD.01|Multistage speed 1|-100.0%～100.0%|0.00%|○|0D01
494 +|FD.02|Multistage speed 2|-100.0%～100.0%|0.00%|○|0D02
495 +|FD.03|Multistage speed 3|-100.0%～100.0%|0.00%|○|0D03
496 +|FD.04|Simple PLC running mode|(((
497 +0:Stop after the AC Drive runs one cycle
498 +
499 +1:Keep final values after the AC Drive runs one cycle
500 +
501 +2:Repeat after the AC Drive runs one cycle
502 +)))|0|○|0D04
503 +|FD.05|Simple PLC retentive option|Units Digit：Reserved
504 + Tens Digit：
505 + 0：Invalid
506 + 1：Valid|0|○|0D05
507 +|FD.06|Running time of simple PLC reference 0|0.0s(h)～100.0s(h)|0.0s(h)|○|0D06
508 +|FD.07|Acceleration/deceleration time of simple PLC reference 0|0～3|0|○|0D07
509 +|FD.08|Running time of simple PLC reference 1|0.0 ～ 100.0|0.0s(h)|○|0D08
510 +|FD.09|Acceleration/deceleration time of simple PLC reference 1|0 ～ 3|0|○|0D09
511 +|FD.10|Running time of simple PLC reference 2|0.0 ～ 100.0|0.0s(h)|○|0D0A
512 +|FD.11|Acceleration/deceleration time of simple PLC reference 2|0 ～ 3|0|○|0D0B
513 +|FD.12|Running time of simple PLC reference 3|0.0 ～ 100.0|0.0s(h)|○|0D0C
514 +|FD.13|Acceleration/deceleration time of simple PLC reference 3|0 ～ 3|0|○|0D0D
515 +|FD.14|Time unit of simple PLC running|0：s（second）
516 + 1：h（hour）
517 + 2：min（minute）|0|○|0D0E
518 +|FD.15|The source of multistage speed 0|(((
519 +0：Set by FD.00
520 +
521 +1：AI
522 +)))|0|○|0D0F
523 +
570 570  == Monitoring Parameters ==
571 571  
572 -|=(% scope="row" %)Parameter|=Name|=(% style="width: 257px;" %)Minimum Unit|=(% style="width: 160px;" %)Priority|=(% style="width: 113px;" %)Address
573 -|=D0.00|Running Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D000
574 -|=D0.01|Set Frequency(Hz)|(% style="width:257px" %)0.01Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D001
575 -|=D0.02|Bus Voltage(V)|(% style="width:257px" %)0.1V|(% style="width:160px" %)◎|(% style="width:113px" %)D002
576 -|=D0.03|Output Voltage(V)|(% style="width:257px" %)1V|(% style="width:160px" %)◎|(% style="width:113px" %)D003
577 -|=D0.04|Output Current(A)|(% style="width:257px" %)0.01A|(% style="width:160px" %)◎|(% style="width:113px" %)D004
578 -|=D0.05|IGBT Module Temperature（℃）|(% style="width:257px" %)0.1℃|(% style="width:160px" %)◎|(% style="width:113px" %)D005
579 -|=D0.06|DI Input Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D006
580 -|=D0.07|DO Output Status|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D007
581 -|=D0.08|Keypad Knob Voltage|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D008
582 -|=D0.09|AI Voltage(V)|(% style="width:257px" %)0.01V|(% style="width:160px" %)◎|(% style="width:113px" %)D009
583 -|=D0.10|Reserved|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D010
584 -|=D0.13|PLC Stage|(% style="width:257px" %)1|(% style="width:160px" %)◎|(% style="width:113px" %)D013
585 -|=D0.14|Feedback Speed(Unit0.1Hz)|(% style="width:257px" %)0.1Hz|(% style="width:160px" %)◎|(% style="width:113px" %)D014
526 +|Parameter|Name|Minimum Unit|Priority|Address
527 +|D0.00|Running Frequency(Hz)|0.01Hz|◎|D000
528 +|D0.01|Set Frequency(Hz)|0.01Hz|◎|D001
529 +|D0.02|Bus Voltage(V)|0.1V|◎|D002
530 +|D0.03|Output Voltage(V)|1V|◎|D003
531 +|D0.04|Output Current(A)|0.01A|◎|D004
532 +|D0.05|IGBT Module Temperature（℃）|0.1℃|◎|D005
533 +|D0.06|DI Input Status|1|◎|D006
534 +|D0.07|DO Output Status|1|◎|D007
535 +|D0.08|Keypad Knob Voltage|0.01V|◎|D008
536 +|D0.09|AI Voltage(V)|0.01V|◎|D009
537 +|D0.10|Reserved|1|◎|D010
538 +|D0.13|PLC Stage|1|◎|D013
539 +|D0.14|Feedback Speed(Unit0.1Hz)|0.1Hz|◎|D014
586 586  
587 587  == Error Records ==
588 588  
589 -|=(% scope="row" %)Parameter|=Name|=(% style="width: 429px;" %)Range and Description|=(% style="width: 124px;" %)Priority|=(% style="width: 129px;" %)Address
590 -|=E0.00|Latest error type|(% style="width:429px" %)(((
591 -* No Error: 0
592 -* Acceleration Over Current: Err02
593 -* Deceleration Over Current: Err03
594 -* Over Current at constant speed: Err04
595 -* Acceleration Over Voltage: Err05
596 -* Deceleration Over Voltage: Err06
597 -* Over Voltage at constant speed: Err07
598 -* Low Voltage error: Err09
599 -* VFD overload: Err10
600 -* Motor overload: Err11
601 -* IGBT overheat: Err14
602 -* External Error: Err15
603 -* Current Detection Error: Err18
604 -* Parameter writing/reading error: Err21
605 -* EEPROM writing/reading error: Err22
606 -)))|(% style="width:124px" %)●|(% style="width:129px" %)　E000
607 -|=E0.01|Running Frequency at latest error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E001
608 -|=E0.02|Output Current at latest error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E002
609 -|=E0.03|Bus Voltage at latest error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E003
610 -|=E0.04|Input terminals status at latest error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E004
611 -|=E0.05|IGBT temperature at latest error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E005
612 -|=E1.00|Former error type|(% style="width:429px" %)As E0.00|(% style="width:124px" %)●|(% style="width:129px" %)　E100
613 -|=E1.01|Running Frequency at former error|(% style="width:429px" %)0.0Hz~~F0.05|(% style="width:124px" %)●|(% style="width:129px" %)　E101
614 -|=E1.02|Output Current at former error|(% style="width:429px" %)0.00~~655.35|(% style="width:124px" %)●|(% style="width:129px" %)　E102
615 -|=E1.03|Bus Voltage at former error|(% style="width:429px" %)0.0~~810|(% style="width:124px" %)●|(% style="width:129px" %)　E103
616 -|=E1.04|Input terminals status at former error|(% style="width:429px" %)0~~63|(% style="width:124px" %)●|(% style="width:129px" %)　E104
617 -|=E1.05|IGBT temperature at former error|(% style="width:429px" %)0~~65535|(% style="width:124px" %)●|(% style="width:129px" %)　E105
543 +|Parameter|Name|Range and Description|Priority|Address
544 +|E0.00|Latest error type|No Error:0
545 + Acceleration Over Current：Err02
546 + Deceleration Over Current：Err03
547 + Over Current at constant speed：Err04
548 + Acceleration Over Voltage：Err05
549 + Deceleration Over Voltage：Err06
550 + Over Voltage at constant speed：Err07
551 + Low Voltage error：Err09
552 + VFD overload：Err10
553 + Motor overload：Err11
554 + IGBT overheat：Err14
555 + External Error：Err15
556 + Current Detection Error：Err18
557 + Parameter writing/reading error：Err21
558 + EEPROM writing/reading error:Err22|●|　E000
559 +|E0.01|Running Frequency at latest error|0.0Hz-F0.05|●|　E001
560 +|E0.02|Output Current at latest error|0.00-655.35|●|　E002
561 +|E0.03|Bus Voltage at latest error|0.0-810|●|　E003
562 +|E0.04|Input terminals status at latest error|0-63|●|　E004
563 +|E0.05|IGBT temperature at latest error|0-65535|●|　E005
564 +|E1.00|Former error type|As E0.00|●|　E100
565 +|E1.01|Running Frequency at former error|0.0Hz-F0.05|●|　E101
566 +|E1.02|Output Current at former error|0.00-655.35|●|　E102
567 +|E1.03|Bus Voltage at former error|0.0-810|●|　E103
568 +|E1.04|Input terminals status at former error|0-63|●|　E104
569 +|E1.05|IGBT temperature at former error|0-65535|●|　E105
618 618  
619 -= 7 Communication Protocol =
571 += 8 Communication Protocol =
620 620  
621 621  VM Series AC Drive provides RS485 communication interface and supports Modbus communication protocol. Users can achieve centralized control by computer or PLC, set AC Drive operation commands, modify or read function code parameters, read the working state and fault info of the AC Drive.
622 622  
623 623  == Communication Control Address ==
624 624  
625 -|=(% scope="row" style="width: 284px;" %)Function|=(% style="width: 134px;" %)Address|=(% style="width: 360px;" %)Description|=(% style="width: 276px;" %)Remarks|=Characteristic
626 -|=(% style="width: 284px;" %)Communication Set Value|(% style="width:134px" %)1000H|(% style="width:360px" %)-10000～10000 (with ± sign)|(% style="width:276px" %)F0.05* (±100.00%)|R/W
627 -|=(% rowspan="7" style="width: 284px;" %)Control Command|(% rowspan="7" style="width:134px" %)2000H|(% style="width:360px" %)0001: Forward running|(% style="width:276px" %)-|W
628 -|(% scope="row" style="width:360px" %)0002: Reverse running|(% style="width:276px" %)-|W
629 -|(% scope="row" style="width:360px" %)0003: JOG forward|(% style="width:276px" %)-|W
630 -|(% scope="row" style="width:360px" %)0004: JOG reverse|(% style="width:276px" %)-|W
631 -|(% scope="row" style="width:360px" %)0005: Free stop|(% style="width:276px" %)-|W
632 -|(% scope="row" style="width:360px" %)0006: Deceleration stop|(% style="width:276px" %)-|W
633 -|(% scope="row" style="width:360px" %)0007: Fault reset|(% style="width:276px" %)-|W
634 -|=(% rowspan="3" style="width: 284px;" %)Running Status|(% rowspan="3" style="width:134px" %)3000H|(% style="width:360px" %)0001: FWD running|(% style="width:276px" %)-|R
635 -|(% scope="row" style="width:360px" %)0002: REV running|(% style="width:276px" %)-|R
636 -|(% scope="row" style="width:360px" %)0003: Stopped|(% style="width:276px" %)-|R
637 -|=(% rowspan="11" style="width: 284px;" %)Monitoring Data|(% style="width:134px" %)1001H|(% style="width:360px" %)Running Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
638 -|(% scope="row" style="width:134px" %)1002H|(% style="width:360px" %)Set Frequency（Hz）|(% style="width:276px" %)2 decimal places|R
639 -|(% scope="row" style="width:134px" %)1003H|(% style="width:360px" %)Bus Voltage（V）|(% style="width:276px" %)1 decimal place|R
640 -|(% scope="row" style="width:134px" %)1004H|(% style="width:360px" %)Output Voltage（V）|(% style="width:276px" %)1 decimal place|R
641 -|(% scope="row" style="width:134px" %)1005H|(% style="width:360px" %)Output Current（A）|(% style="width:276px" %)2 decimal places|R
642 -|(% scope="row" style="width:134px" %)1006H|(% style="width:360px" %)IGBT Temperature|(% style="width:276px" %)1 decimal place|R
643 -|(% scope="row" style="width:134px" %)1007H|(% style="width:360px" %)Digital input status|(% style="width:276px" %)DI1-DI4 Added by binary bit weight|R
644 -|(% scope="row" style="width:134px" %)1009H|(% style="width:360px" %)Keypad Knob Voltage（V）|(% style="width:276px" %)1 decimal place|R
645 -|(% scope="row" style="width:134px" %)101AH|(% style="width:360px" %)AI Volatage （V）|(% style="width:276px" %)1 decimal place|R
646 -|(% scope="row" style="width:134px" %)100BH|(% style="width:360px" %)Load Speed Display|(% style="width:276px" %)1 decimal place|R
647 -|(% scope="row" style="width:134px" %)100EH|(% style="width:360px" %)PLC Stage|(% style="width:276px" %)Simple PLC running stage|R
648 -|=(% rowspan="14" style="width: 284px;" %)Failure status|(% rowspan="14" style="width:134px" %)8000H|(% style="width:360px" %)0000: No error|(% style="width:276px" %)-|R
649 -|(% scope="row" style="width:360px" %)0002: Acceleration Over Current|(% style="width:276px" %)-|R
650 -|(% scope="row" style="width:360px" %)0003: Acceleration Over Current|(% style="width:276px" %)-|R
651 -|(% scope="row" style="width:360px" %)0004: Over Current at Constant Speed|(% style="width:276px" %)-|R
652 -|(% scope="row" style="width:360px" %)0005: Acceleration Over Voltage|(% style="width:276px" %)-|R
653 -|(% scope="row" style="width:360px" %)0006: Deceleration Over Voltage|(% style="width:276px" %)-|R
654 -|(% scope="row" style="width:360px" %)0007: Over Voltage at Constant Speed|(% style="width:276px" %)-|R
655 -|(% scope="row" style="width:360px" %)0009: Low Voltage Error|(% style="width:276px" %)-|R
656 -|(% scope="row" style="width:360px" %)000A: VFD Overload|(% style="width:276px" %)-|R
657 -|(% scope="row" style="width:360px" %)000B: Motor Overload|(% style="width:276px" %)-|R
658 -|(% scope="row" style="width:360px" %)000E: IGBT Overheat|(% style="width:276px" %)-|R
659 -|(% scope="row" style="width:360px" %)000F: External Error|(% style="width:276px" %)-|R
660 -|(% scope="row" style="width:360px" %)0012: Current Detection Error|(% style="width:276px" %)-|R
661 -|(% scope="row" style="width:360px" %)0015: Parameters Writing/Reading Error|(% style="width:276px" %)-|R
662 -|=(% rowspan="9" style="width: 284px;" %)Communication Error Feedback|(% rowspan="9" style="width:134px" %)8001H|(% style="width:360px" %)0000: No Error|(% style="width:276px" %)-|R
663 -|(% scope="row" style="width:360px" %)0001: Password Error|(% style="width:276px" %)-|R
664 -|(% scope="row" style="width:360px" %)0002: Command Code Error|(% style="width:276px" %)-|R
665 -|(% scope="row" style="width:360px" %)0003: CRCError|(% style="width:276px" %)-|R
666 -|(% scope="row" style="width:360px" %)0004: Invalid Address|(% style="width:276px" %)-|R
667 -|(% scope="row" style="width:360px" %)0005: Invalid Parameter|(% style="width:276px" %)-|R
668 -|(% scope="row" style="width:360px" %)0006: Parameters Adjustment Failed|(% style="width:276px" %)-|R
669 -|(% scope="row" style="width:360px" %)0007: System Locked|(% style="width:276px" %)-|R
670 -|(% scope="row" style="width:360px" %)0008: Parameters Being Saved|(% style="width:276px" %)-|R
577 +|Function|Address|Description|Remarks|Characteristic
578 +|Communication Set Value|1000H|-10000～10000（with ± sign）|F0.05*（±100.00%）|R/W
579 +|(% rowspan="7" %)Control Command|(% rowspan="7" %)2000H|0001: Forward running|-|W
580 +|0002: Reverse running|-|W
581 +|0003: JOG forward|-|W
582 +|0004: JOG reverse|-|W
583 +|0005: Free stop|-|W
584 +|0006: Deceleration stop|-|W
585 +|0007: Fault reset|-|W
586 +|(% rowspan="3" %)Running Status|(% rowspan="3" %)3000H|0001：FWD running|-|R
587 +|0002：REV running|-|R
588 +|0003：Stopped|-|R
589 +|(% rowspan="11" %)Monitoring Data|1001H|Running Frequency（Hz）|2 decimal places|R
590 +|1002H|Set Frequency（Hz）|2 decimal places|R
591 +|1003H|Bus Voltage（V）|1 decimal place|R
592 +|1004H|Output Voltage（V）|1 decimal place|R
593 +|1005H|Output Current（A）|2 decimal places|R
594 +|1006H|IGBT Temperature|1 decimal place|R
595 +|1007H|Digital input status|DI1-DI4 Added by binary bit weight|R
596 +|1009H|Keypad Knob Voltage（V）|1 decimal place|R
597 +|101AH|AI Volatage （V）|1 decimal place|R
598 +|100BH|Load Speed Display|1 decimal place|R
599 +|100EH|PLC Stage|Simple PLC running stage|R
600 +|(% rowspan="14" %)Failure status|(% rowspan="14" %)8000H|0000：No error|-|R
601 +|0002：Acceleration Over Current|-|R
602 +|0003：Acceleration Over Current|-|R
603 +|0004：Over Current at Constant Speed|-|R
604 +|0005：Acceleration Over Voltage|-|R
605 +|0006：Deceleration Over Voltage|-|R
606 +|0007：Over Voltage at Constant Speed|-|R
607 +|0009：Low Voltage Error|-|R
608 +|000A：VFD Overload|-|R
609 +|000B：Motor Overload|-|R
610 +|000E：IGBT Overheat|-|R
611 +|000F：External Error|-|R
612 +|0012：Current Detection Error|-|R
613 +|0015：Parameters Writing/Reading Error|-|R
614 +|(% rowspan="9" %)Communication Error Feedback|(% rowspan="9" %)8001H|0000：No Error|-|R
615 +|0001：Password Error|-|R
616 +|0002：Command Code Error|-|R
617 +|0003：CRCError|-|R
618 +|0004：Invalid Address|-|R
619 +|0005：Invalid Parameter|-|R
620 +|0006：Parameters Adjustment Failed|-|R
621 +|0007：System Locked|-|R
622 +|0008：Parameters Being Saved|-|R
671 671  
672 672  Sheet 5-1-1 Control Command Addresses
673 673  
... ... @@ -683,12 +683,12 @@
683 683  
684 684  It should be noted that the erasing life of EEPROM is about 1 million times. After exceeding the erasing times, it will affect the reliability of data storage. If it is not necessary, it is recommended to control the communication by writing to RAM.
685 685  
686 -= 8 Troubleshooting & countermeasures =
638 += 9 Troubleshooting & countermeasures =
687 687  
688 688  == Faults and solutions ==
689 689  
690 -|=(% scope="row" %)Fault code|=Fault type|=Reason|=Solution
691 -|=Err02|Overcurrent during acceleration|(((
642 +|Fault code|Fault type|Reason|Solution
643 +|Err02|Overcurrent during acceleration|(((
692 692  ~1. The output circuit of AC Drive is grounded or short circuited.
693 693  
694 694  2. The acceleration time is too short.
... ... @@ -705,7 +705,7 @@
705 705  
706 706  4. Select the AC Drive of higher power.
707 707  )))
708 -|=Err03|Overcurrent during deceleration|(((
660 +|Err03|Overcurrent during deceleration|(((
709 709  ~1. The output circuit of AC Drive is grounded or short circuited.
710 710  
711 711  2. The deceleration time is too short.
... ... @@ -714,7 +714,7 @@
714 714  
715 715  2. Increase the deceleration time.
716 716  )))
717 -|=Err04|Overcurrent at constant speed|(((
669 +|Err04|Overcurrent at constant speed|(((
718 718  ~1. The output circuit of AC Drive is grounded or short circuited.
719 719  
720 720  2. The AC Drive model is of too small power.
... ... @@ -723,7 +723,7 @@
723 723  
724 724  2. Select the AC Drive of higher power.
725 725  )))
726 -|=Err05|Overvoltage during acceleration|(((
678 +|Err05|Overvoltage during acceleration|(((
727 727  ~1. Input voltage abnormal.
728 728  
729 729  2. An external force drives the motor during acceleration.
... ... @@ -740,7 +740,7 @@
740 740  
741 741  4. Installed the braking unit and braking resistor.
742 742  )))
743 -|=Err06|Overvoltage during deceleration|(((
695 +|Err06|Overvoltage during deceleration|(((
744 744  ~1. Input voltage abnormal.
745 745  
746 746  2. An external force drives the motor during deceleration.
... ... @@ -757,7 +757,7 @@
757 757  
758 758  4. Installed the braking unit and braking resistor.
759 759  )))
760 -|=Err07|Overvoltage at constant speed|(((
712 +|Err07|Overvoltage at constant speed|(((
761 761  ~1. Input voltage abnormal.
762 762  
763 763  2. An external force drives the motor during deceleration.
... ... @@ -766,7 +766,7 @@
766 766  
767 767  2. Cancel the external force.
768 768  )))
769 -|=Err09|Undervoltage|(((
721 +|Err09|Undervoltage|(((
770 770  ~1. Instantaneous power failure occurs on the input supply.
771 771  
772 772  2. The input voltage is not within the normal range.
... ... @@ -779,7 +779,7 @@
779 779  
780 780  3. Looking for technical service.
781 781  )))
782 -|=Err10|AC Drive overload|(((
734 +|Err10|AC Drive overload|(((
783 783  ~1. The load is too heavy or lockedrotor occurs on motor.
784 784  
785 785  2. The AC Drive model is of too small power.
... ... @@ -788,7 +788,7 @@
788 788  
789 789  2. Select the AC Drive of higher power.
790 790  )))
791 -|=Err11|Motor overload|(((
743 +|Err11|Motor overload|(((
792 792  The parameter setting of F2.03 does not match the motor
793 793  
794 794  2. The AC Drive model is of too small power.
... ... @@ -797,7 +797,7 @@
797 797  
798 798  2. Reduce the load and check the motor.
799 799  )))
800 -|=Err14|Module overheating|(((
752 +|Err14|Module overheating|(((
801 801  ~1. The ambient temperature is too high.
802 802  
803 803  2. The air filter is blocked.
... ... @@ -814,8 +814,8 @@
814 814  
815 815  4. Ask for technical service.
816 816  )))
817 -|=Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
818 -|=Err16|Communication fault|(((
769 +|Err15|External equipment fault|External fault signal (DI) triggers|1. Check the input DI terminal
770 +|Err16|Communication fault|(((
819 819  ~1. The PC is in abnormal state.
820 820  
821 821  2. The communication cable is faulty.
... ... @@ -828,26 +828,26 @@
828 828  
829 829  3. Set the communication parameters properly.
830 830  )))
831 -|=Err18|Current detection fault|(((
783 +|Err18|Current detection fault|(((
832 832  ~1. Current detection circuit is abnormal.
833 833  
834 834  2. Control circuit is abnormal.
835 835  )))|1. Ask for technical service.
836 -|=Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
837 -|=Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
788 +|Err21|Data overflow|1. The control board is abnormal.|1. Ask for technical service.
789 +|Err22|On-power EEPROM check fault|1. The EEPROM chip is damaged.|1. Ask for technical service.
838 838  
839 839  Table 6-1-1 Faults and solutions
840 840  
841 841  == Common faults and solutions ==
842 842  
843 -|=(% scope="row" style="width: 59px;" %)**SN**|=(% style="width: 232px;" %)**Fault**|=(% style="width: 456px;" %)**Possible causes**|=(% style="width: 456px;" %)**Solutions**
844 -|=(% style="width: 59px;" %)1|(% style="width:232px" %)No display at power-on state|(% style="width:456px" %)(((
795 +|**SN**|**Fault**|**Possible causes**|**Solutions**
796 +|1|No display at power-on state|(((
845 845  ~1. The input power of AC Drive is abnormal.
846 846  
847 847  2. The control board has a bad contact with cable that is connected to the keypad.
848 848  
849 849  3. The AC Drive is abnormal.
850 -)))|(% style="width:456px" %)(((
802 +)))|(((
851 851  ~1. Check the input power.
852 852  
853 853  2. Re-connect the cable.
... ... @@ -854,7 +854,7 @@
854 854  
855 855  3. Ask for technical service.
856 856  )))
857 -|=(% style="width: 59px;" %)2|(% style="width:232px" %)The motor does not rotate after the AC Drive runs.|(% style="width:456px" %)(((
809 +|2|The motor does not rotate after the AC Drive runs.|(((
858 858  ~1. The motor is damaged.
859 859  
860 860  2. The motor cables is abnormal.
... ... @@ -862,7 +862,7 @@
862 862  3. The cable between the drive board and control board is in poor contact.
863 863  
864 864  4. The AC Drive is abnormal.
865 -)))|(% style="width:456px" %)(((
817 +)))|(((
866 866  ~1. Replay the motor.
867 867  
868 868  2. Ensure the cable between the AC Drive and the motor is normal.
... ... @@ -871,13 +871,13 @@
871 871  
872 872  4. Ask for technical service.
873 873  )))
874 -|=(% style="width: 59px;" %)3|(% style="width:232px" %)DI termianls are disabled.|(% style="width:456px" %)(((
826 +|3|DI termianls are disabled.|(((
875 875  ~1. The parameters are set incorrectly.
876 876  
877 877  2. The external signal is incorrect.
878 878  
879 879  3. The control board is abnormal.
880 -)))|(% style="width:456px" %)(((
832 +)))|(((
881 881  ~1. Check and reset the parameters in group F5.
882 882  
883 883  2. Re-connect the external signal cables.
... ... @@ -884,13 +884,13 @@
884 884  
885 885  3. Ask for technical service.
886 886  )))
887 -|=(% style="width: 59px;" %)4|(% style="width:232px" %)AC Drive interference|(% style="width:456px" %)(((
839 +|4|AC Drive interference|(((
888 888  ~1. Carrier frequency setting is not suitable.
889 889  
890 890  2. The grounding method of the AC Drive and the motor is incorrect.
891 891  
892 892  3. The wire between the AC Drive and the motor is too long.
893 -)))|(% style="width:456px" %)(((
845 +)))|(((
894 894  ~1. Reduce the carrier frequency
895 895  
896 896  2. The AC Drive and the motor are effectively grounded and separated from the ground of the peripheral device.
... ... @@ -897,22 +897,22 @@
897 897  
898 898  3. Install out reactor or reduce wire distance.
899 899  )))
900 -|=(% style="width: 59px;" %)5|(% style="width:232px" %)Motor noise is too loud.|(% style="width:456px" %)(((
852 +|5|Motor noise is too loud.|(((
901 901  ~1. Motor damage or mechanical failure.
902 902  
903 903  2. Carrier frequency setting is too small.
904 -)))|(% style="width:456px" %)(((
856 +)))|(((
905 905  ~1. Replace the motor or clear the mechanical fault.
906 906  
907 907  2. Increase the carrier frequency appropriately.
908 908  )))
909 -|=(% style="width: 59px;" %)6|(% style="width:232px" %)Switch trip|(% style="width:456px" %)(((
861 +|6|Switch trip|(((
910 910  ~1. Installed a leakage switch or an air switch overload.
911 911  
912 912  2. The input power of AC Drive is abnormal.
913 913  
914 914  3. The AC Drive is damaged.
915 -)))|(% style="width:456px" %)(((
867 +)))|(((
916 916  ~1. Replay the leakage switch or replay the larfer capacity air switch.
917 917  
918 918  2. Eliminate whether the input power is shorted.
... ... @@ -921,3 +921,10 @@
921 921  )))
922 922  
923 923  Table 6-2-1 Common faults and solutions
876 +
877 +
878 +(((
879 +
880 +)))
881 +
882 +